|
123456789101112131415161718192021222324252627282930313233343536373839404142 |
- # WS2812Serial - Non-Blocking WS2812B / NeoPixel LEDs Library
-
- Similar to [OctoWS2811](https://www.pjrc.com/teensy/td_libs_OctoWS2811.html), this library
- allows you to use WS2811, WS2812, WS2812B / NeoPixel LEDs without blocking interrupts.
-
- 
-
- Non-blocking allows other libraries, especially
- [Audio](https://www.pjrc.com/teensy/td_libs_Audio.html) and high speed serial communication
- to function properly while the LEDs update. Complex animation can also run faster,
- because the show() function does not wait for the LEDs to update, allowing your code
- more time to draw the next frame.
-
- ## Hardware Resources Used
-
- WS2812Serial controls a single LED strip, using only 1 pin. While any number of
- LEDs may be connected, in practice 1 pin is best for small projects with less
- than 600 LEDs. OctoWS2811 offers 8 parallel outputs for large projects.
-
- Non-blocking performance does come with a cost. 15 bytes of memory are required
- per LED, rather than the usual 3 bytes with [FastLED](http://fastled.io/) or
- [Adafruit NeoPixel](https://github.com/adafruit/Adafruit_NeoPixel). One of
- the [hardware serial ports](https://www.pjrc.com/teensy/td_uart.html) is also
- used to transmit the data, making that port unavailable for other uses.
-
- ## Supported Pins & Serial Ports
-
- | Port | Teensy LC | Teensy 3.2 | Teensy 3.5 | Teensy 3.6 |
- | :------ | :---------: | :--------: | :--------: | :--------: |
- | Serial1 | 1, 4, 5, 24 | 1, 5 | 1, 5, 26 | 1, 5, 26 |
- | Serial2 | | 10, 31 | 10 | 10 |
- | Serial3 | | 8, 20 | 8, 20 | 8, 20 |
- | Serial4 | | | 32 | 32 |
- | Serial5 | | | 33 | 33 |
- | Serial6 | | | 48 | |
-
- Serial2 & Serial3 on Teensy LC are not supported, due to lack of configurable
- oversampling needed to run at the high speed required.
-
- Serial6 on Teensy 3.6 is not currently supported, due to different hardware
- registers.
-
|
