framework-arduinoteensy-cxx20/cores/usb_midi/usb_private.h

#ifndef usb_serial_h__
#define usb_serial_h__

#include <stdint.h>

#ifdef __cplusplus
extern "C"{
#endif

/**************************************************************************
 *
 *  Configurable Options
 *
 **************************************************************************/

#define VENDOR_ID               0x16C0
#define PRODUCT_ID              0x0485
#define TRANSMIT_FLUSH_TIMEOUT  4   /* in milliseconds */
#define TRANSMIT_TIMEOUT        25   /* in milliseconds */


/**************************************************************************
 *
 *  Endpoint Buffer Configuration
 *
 **************************************************************************/

// These buffer sizes are best for most applications, but perhaps if you
// want more buffering on some endpoint at the expense of others, this
// is where you can make such changes.  The AT90USB162 has only 176 bytes
// of DPRAM (USB buffers) and only endpoints 3 & 4 can double buffer.


// 0: control
// 1: debug IN
// 2: debug OUT
// 3: midi IN
// 4: midi OUT

#if defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)

// Some operating systems, especially Windows, may cache USB device
// info.  Changes to the device name may not update on the same
// computer unless the vendor or product ID numbers change, or the
// "bcdDevice" revision code is increased.

#ifndef STR_PRODUCT
#define STR_PRODUCT             L"Teensy MIDI"
#endif

#define ENDPOINT0_SIZE          64

#define DEBUG_INTERFACE		1
#define DEBUG_TX_ENDPOINT	1
#define DEBUG_TX_SIZE		64
#define DEBUG_TX_BUFFER		EP_DOUBLE_BUFFER
#define DEBUG_TX_INTERVAL	1
#define DEBUG_RX_ENDPOINT	2
#define DEBUG_RX_SIZE		32
#define DEBUG_RX_BUFFER		EP_DOUBLE_BUFFER
#define DEBUG_RX_INTERVAL	2

#define MIDI_INTERFACE		0
#define MIDI_TX_ENDPOINT	3
#define MIDI_TX_SIZE		64
#define MIDI_TX_BUFFER		EP_DOUBLE_BUFFER
#define MIDI_RX_ENDPOINT	4
#define MIDI_RX_SIZE		64
#define MIDI_RX_BUFFER		EP_DOUBLE_BUFFER

#define NUM_ENDPOINTS		5
#define NUM_INTERFACE		2

#endif



// setup
void usb_init(void);			// initialize everything
void usb_shutdown(void);		// shut off USB

// variables
extern volatile uint8_t usb_configuration;
extern volatile uint8_t usb_suspended;
extern volatile uint8_t debug_flush_timer;


#ifdef __cplusplus
} // extern "C"
#endif

#endif