|
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250 |
- /*
- UTFT.h - Arduino/chipKit library support for Color TFT LCD Boards
- Copyright (C)2010-2013 Henning Karlsen. All right reserved
-
- This library is the continuation of my ITDB02_Graph, ITDB02_Graph16
- and RGB_GLCD libraries for Arduino and chipKit. As the number of
- supported display modules and controllers started to increase I felt
- it was time to make a single, universal library as it will be much
- easier to maintain in the future.
-
- Basic functionality of this library was origianlly based on the
- demo-code provided by ITead studio (for the ITDB02 modules) and
- NKC Electronics (for the RGB GLCD module/shield).
-
- This library supports a number of 8bit, 16bit and serial graphic
- displays, and will work with both Arduino and chipKit boards. For a
- full list of tested display modules and controllers, see the
- document UTFT_Supported_display_modules_&_controllers.pdf.
-
- When using 8bit and 16bit display modules there are some
- requirements you must adhere to. These requirements can be found
- in the document UTFT_Requirements.pdf.
- There are no special requirements when using serial displays.
-
- You can always find the latest version of the library at
- http://electronics.henningkarlsen.com/
-
- If you make any modifications or improvements to the code, I would
- appreciate that you share the code with me so that I might include
- it in the next release. I can be contacted through
- http://electronics.henningkarlsen.com/contact.php.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the CC BY-NC-SA 3.0 license.
- Please see the included documents for further information.
- */
-
- #ifndef UTFT_h
- #define UTFT_h
-
- #define UTFT_VERSION 272
-
- #define LEFT 0
- #define RIGHT 9999
- #define CENTER 9998
-
- #define PORTRAIT 0
- #define LANDSCAPE 1
-
- #define HX8347A 0
- #define ILI9327 1
- #define SSD1289 2
- #define ILI9325C 3
- #define ILI9325D_8 4
- #define ILI9325D_16 5
- #define HX8340B_8 6
- #define HX8340B_S 7
- #define HX8352A 8
- #define ST7735 9
- #define PCF8833 10
- #define S1D19122 11
- #define SSD1963_480 12
- #define SSD1963_800 13
- #define S6D1121_8 14
- #define S6D1121_16 15
- #define SSD1289LATCHED 16
- #define ILI9320_8 17
- #define ILI9320_16 18
- #define SSD1289_8 19
- #define SSD1963_800ALT 20
- #define ILI9481 21
- #define ILI9325D_16ALT 22
- #define S6D0164 23
- #define ST7735S 24
- #define ILI9341_S5P 25
- #define ILI9341_S4P 26
- #define R61581 27
- #define ILI9486 28
-
- #define ITDB32 0 // HX8347-A (16bit)
- #define ITDB32WC 1 // ILI9327 (16bit)
- #define TFT01_32W 1 // ILI9327 (16bit)
- #define ITDB32S 2 // SSD1289 (16bit)
- #define TFT01_32 2 // SSD1289 (16bit)
- #define CTE32 2 // SSD1289 (16bit)
- #define GEEE32 2 // SSD1289 (16bit)
- #define ITDB24 3 // ILI9325C (8bit)
- #define ITDB24D 4 // ILI9325D (8bit)
- #define ITDB24DWOT 4 // ILI9325D (8bit)
- #define ITDB28 4 // ILI9325D (8bit)
- #define TFT01_24_8 4 // ILI9325D (8bit)
- #define TFT01_24_16 5 // ILI9325D (16bit)
- #define ITDB22 6 // HX8340-B (8bit)
- #define GEEE22 6 // HX8340-B (8bit)
- #define ITDB22SP 7 // HX8340-B (Serial)
- #define ITDB32WD 8 // HX8352-A (16bit)
- #define TFT01_32WD 8 // HX8352-A (16bit)
- #define CTE32W 8 // HX8352-A (16bit)
- #define ITDB18SP 9 // ST7735 (Serial)
- #define LPH9135 10 // PCF8833 (Serial)
- #define ITDB25H 11 // S1D19122 (16bit)
- #define ITDB43 12 // SSD1963 (16bit) 480x272
- #define TFT01_43 12 // SSD1963 (16bit) 480x272
- #define ITDB50 13 // SSD1963 (16bit) 800x480
- #define TFT01_50 13 // SSD1963 (16bit) 800x480
- #define CTE50 13 // SSD1963 (16bit) 800x480
- #define ITDB24E_8 14 // S6D1121 (8bit)
- #define TFT01_24R2 14 // S6D1121 (8bit)
- #define ITDB24E_16 15 // S6D1121 (16bit)
- #define INFINIT32 16 // SSD1289 (Latched 16bit) -- Legacy, will be removed later
- #define ELEE32_REVA 16 // SSD1289 (Latched 16bit)
- #define GEEE24 17 // ILI9320 (8bit)
- #define GEEE28 18 // ILI9320 (16bit)
- #define ELEE32_REVB 19 // SSD1289 (8bit)
- #define TFT01_70 20 // SSD1963 (16bit) 800x480 Alternative Init
- #define CTE70 20 // SSD1963 (16bit) 800x480 Alternative Init
- #define CTE32HR 21 // ILI9481 (16bit)
- #define CTE28 22 // ILI9325D (16bit) Alternative Init
- #define TFT01_28 22 // ILI9325D (16bit) Alternative Init
- #define CTE22 23 // S6D0164 (8bit)
- #define TFT01_22 23 // S6D0164 (8bit)
- #define TFT01_18SP 24 // ST7735S (Serial)
- #define TFT01_22SP 25 // ILI9341 (Serial 5Pin)
- #define MI0283QT9 26 // ILI9341 (Serial 4Pin)
- #define CTE35IPS 27 // R61581 (16bit)
- #define CTE40 28 // ILI9486 (16bit)
-
-
- #define SERIAL_4PIN 4
- #define SERIAL_5PIN 5
- #define LATCHED_16 17
-
- //*********************************
- // COLORS
- //*********************************
- // VGA color palette
- #define VGA_BLACK 0x0000
- #define VGA_WHITE 0xFFFF
- #define VGA_RED 0xF800
- #define VGA_GREEN 0x0400
- #define VGA_BLUE 0x001F
- #define VGA_SILVER 0xC618
- #define VGA_GRAY 0x8410
- #define VGA_MAROON 0x8000
- #define VGA_YELLOW 0xFFE0
- #define VGA_OLIVE 0x8400
- #define VGA_LIME 0x07E0
- #define VGA_AQUA 0x07FF
- #define VGA_TEAL 0x0410
- #define VGA_NAVY 0x0010
- #define VGA_FUCHSIA 0xF81F
- #define VGA_PURPLE 0x8010
- #define VGA_TRANSPARENT 0xFFFFFFFF
-
- #if defined(__AVR__)
- #include "Arduino.h"
- #include "hardware/avr/HW_AVR_defines.h"
- #elif defined(__PIC32MX__)
- #include "WProgram.h"
- #include "hardware/pic32/HW_PIC32_defines.h"
- #elif defined(__arm__)
- #include "Arduino.h"
- #include "hardware/arm/HW_ARM_defines.h"
- #endif
-
- struct _current_font
- {
- uint8_t* font;
- uint8_t x_size;
- uint8_t y_size;
- uint8_t offset;
- uint8_t numchars;
- };
-
- class UTFT
- {
- public:
- UTFT();
- UTFT(byte model, int RS, int WR,int CS, int RST, int SER=0);
- void InitLCD(byte orientation=LANDSCAPE);
- void clrScr();
- void drawPixel(int x, int y);
- void drawLine(int x1, int y1, int x2, int y2);
- void fillScr(byte r, byte g, byte b);
- void fillScr(word color);
- void drawRect(int x1, int y1, int x2, int y2);
- void drawRoundRect(int x1, int y1, int x2, int y2);
- void fillRect(int x1, int y1, int x2, int y2);
- void fillRoundRect(int x1, int y1, int x2, int y2);
- void drawCircle(int x, int y, int radius);
- void fillCircle(int x, int y, int radius);
- void setColor(byte r, byte g, byte b);
- void setColor(word color);
- word getColor();
- void setBackColor(byte r, byte g, byte b);
- void setBackColor(uint32_t color);
- word getBackColor();
- void print(const char *st, int x, int y, int deg=0);
- void print(String st, int x, int y, int deg=0);
- void printNumI(long num, int x, int y, int length=0, char filler=' ');
- void printNumF(double num, byte dec, int x, int y, char divider='.', int length=0, char filler=' ');
- void setFont(uint8_t* font);
- uint8_t* getFont();
- uint8_t getFontXsize();
- uint8_t getFontYsize();
- void drawBitmap(int x, int y, int sx, int sy, bitmapdatatype data, int scale=1);
- void drawBitmap(int x, int y, int sx, int sy, bitmapdatatype data, int deg, int rox, int roy);
- void lcdOff();
- void lcdOn();
- void setContrast(char c);
- int getDisplayXSize();
- int getDisplayYSize();
-
- /*
- The functions and variables below should not normally be used.
- They have been left publicly available for use in add-on libraries
- that might need access to the lower level functions of UTFT.
-
- Please note that these functions and variables are not documented
- and I do not provide support on how to use them.
- */
- byte fch, fcl, bch, bcl;
- byte orient;
- long disp_x_size, disp_y_size;
- byte display_model, display_transfer_mode, display_serial_mode;
- regtype *P_RS, *P_WR, *P_CS, *P_RST, *P_SDA, *P_SCL, *P_ALE;
- regsize B_RS, B_WR, B_CS, B_RST, B_SDA, B_SCL, B_ALE;
- _current_font cfont;
- boolean _transparent;
-
- void LCD_Writ_Bus(char VH,char VL, byte mode);
- void LCD_Write_COM(char VL);
- void LCD_Write_DATA(char VH,char VL);
- void LCD_Write_DATA(char VL);
- void LCD_Write_COM_DATA(char com1,int dat1);
- void _hw_special_init();
- void setPixel(word color);
- void drawHLine(int x, int y, int l);
- void drawVLine(int x, int y, int l);
- void printChar(byte c, int x, int y);
- void setXY(word x1, word y1, word x2, word y2);
- void clrXY();
- void rotateChar(byte c, int x, int y, int pos, int deg);
- void _set_direction_registers(byte mode);
- void _fast_fill_16(int ch, int cl, long pix);
- void _fast_fill_8(int ch, long pix);
- void _convert_float(char *buf, double num, int width, byte prec);
- };
-
- #endif
|