/*
A benchmark test - measure the speed of many drawing functions of RA8875 library at any rotation
Open your serial monitor for results
*/

#include <SPI.h>
#include <RA8875.h>

#define DELAY_BETWEEN 500


/*
Teensy3.x and Arduino's
You are using 4 wire SPI here, so:
 MOSI:  11//Teensy3.x
 MISO:  12//Teensy3.x
 SCK:   13//Teensy3.x
 the rest of pin below:
 */
#define RA8875_CS 10
#define RA8875_RESET 9
/*
DUE can use 4,10 or 52( or 53? don't remember)
*/

RA8875 tft = RA8875(RA8875_CS, RA8875_RESET);

void setup() {
  Serial.begin(38400);
  long unsigned debug_start = millis ();
  while (!Serial && ((millis () - debug_start) <= 5000)) ;
  tft.begin(RA8875_800x480);
}

uint8_t rot = 0;
void loop(void) {
  test(rot);
  rot++;
  if (rot > 3) rot = 0;
}