/* Copyright (c) 2009 Nordic Semiconductor. All Rights Reserved. * * The information contained herein is property of Nordic Semiconductor ASA. * Terms and conditions of usage are described in detail in NORDIC * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. * * Licensees are granted free, non-transferable use of the information. NO * WARRENTY of ANY KIND is provided. This heading must NOT be removed from * the file. * * $LastChangedRevision$ */ /* Attention! * To maintain compliance with Nordic Semiconductor ASA’s Bluetooth profile * qualification listings, this section of source code must not be modified. */ #ifndef LIB_ACI_H__ #define LIB_ACI_H__ /** @file * @brief ACI library */ /** @addtogroup lib_aci @{ @brief Library for the logical part of the Application Controller Interface (ACI) */ #include "hal_platform.h" #include "hal/hal_aci_tl.h" #include "aci.h" #include "aci_cmds.h" #include "aci_evts.h" #define EVT_CMD_RESPONSE_MIN_LENGTH 3 #define PIPES_ARRAY_SIZE ((ACI_DEVICE_MAX_PIPES + 7)/8) /* Same size as a hal_aci_data_t */ typedef struct hal_aci_evt_t{ uint8_t debug_byte; aci_evt_t evt; } __attribute__((packed)) hal_aci_evt_t; typedef struct { uint8_t location; /**< enum aci_pipe_store_t */ aci_pipe_type_t pipe_type; } services_pipe_type_mapping_t; typedef struct aci_setup_info_t { services_pipe_type_mapping_t *services_pipe_type_mapping; uint8_t number_of_pipes; hal_aci_data_t *setup_msgs; uint8_t num_setup_msgs; } aci_setup_info_t; // aci_struct that will contain // total initial credits // current credit // current state of the aci (setup/standby/active/sleep) // open remote pipe pending // close remote pipe pending // Current pipe available bitmap // Current pipe closed bitmap // Current connection interval, slave latency and link supervision timeout // Current State of the the GATT client (Service Discovery status) // Relationship of bond to peer address typedef struct aci_state_t { aci_setup_info_t aci_setup_info; /* Data structures that are created from nRFgo Studio */ uint8_t bonded; /* ( aci_bond_status_code_t ) Is the nRF8001 bonded to a peer device */ uint8_t data_credit_total; /* Total data credit available for the specific version of the nRF8001, total equals available when a link is established */ aci_device_operation_mode_t device_state; /* Operating mode of the nRF8001 */ /* Start : Variables that are valid only when in a connection */ uint8_t data_credit_available; /* Available data credits at a specific point of time, ACI_EVT_DATA_CREDIT updates the available credits */ uint16_t connection_interval; /* Multiply by 1.25 to get the connection interval in milliseconds*/ uint16_t slave_latency; /* Number of consecutive connection intervals that the nRF8001 is not required to transmit. Use this to save power */ uint16_t supervision_timeout; /* Multiply by 10 to get the supervision timeout in milliseconds */ uint8_t pipes_open_bitmap[PIPES_ARRAY_SIZE]; /* Bitmap -> pipes are open and can be used for sending data over the air */ uint8_t pipes_closed_bitmap[PIPES_ARRAY_SIZE]; /* Bitmap -> pipes are closed and cannot be used for sending data over the air */ bool confirmation_pending; /* Attribute protocol Handle Value confirmation is pending for a Handle Value Indication (ACK is pending for a TX_ACK pipe) on local GATT Server*/ /* End : Variables that are valid only when in a connection */ } aci_state_t; #define DISCONNECT_REASON_CX_TIMEOUT 0x08 #define DISCONNECT_REASON_CX_CLOSED_BY_PEER_DEVICE 0x13 #define DISCONNECT_REASON_POWER_LOSS 0x14 #define DISCONNECT_REASON_CX_CLOSED_BY_LOCAL_DEVICE 0x16 #define DISCONNECT_REASON_ADVERTISER_TIMEOUT 0x50 /** @name Functions for library management */ //@{ /** @brief Function to enable printing of all ACI commands sent and ACI events received * @details This function shall be used to enable or disable the debug printing. Debug printing is disabled by default. */ void lib_aci_debug_print(bool enable); /** @brief Initialization function. * @details This function shall be used to initialize/reset ACI Library and also Resets the nRF8001 by togging the reset pin of the nRF8001. This function will reset * all the variables locally used by ACI library to their respective default values. */ void lib_aci_init(aci_state_t *aci_stat); /** @brief Gets the number of currently available ACI credits. * @return Number of ACI credits. */ uint8_t lib_aci_get_nb_available_credits(aci_state_t *aci_stat); /** @brief Gets the connection interval in milliseconds. * @return Connection interval in milliseconds. */ uint16_t lib_aci_get_cx_interval_ms(aci_state_t *aci_stat); /** @brief Gets the connection interval in multiple of 1.25 ms. * @return Connection interval in multiple of 1.25 ms. */ uint16_t lib_aci_get_cx_interval(aci_state_t *aci_stat); /** @brief Gets the current slave latency. * @return Current slave latency. */ uint16_t lib_aci_get_slave_latency(aci_state_t *aci_stat); /** @brief Checks if a given pipe is available. * @param pipe Pipe to check. * @return True if the pipe is available, otherwise false. */ bool lib_aci_is_pipe_available(aci_state_t *aci_stat, uint8_t pipe); /** @brief Checks if a given pipe is closed. * @param pipe Pipe to check. * @return True if the pipe is closed, otherwise false. */ bool lib_aci_is_pipe_closed(aci_state_t *aci_stat, uint8_t pipe); /** @brief Checks if the discovery operation is finished. * @return True if the discovery is finished. */ bool lib_aci_is_discovery_finished(aci_state_t *aci_stat); //@} /** @name ACI Commands available in all modes */ //@{ /** @brief Sets the radio in sleep mode. * @details The function sends a @c sleep command to the radio. * If the radio is advertising or connected, it sends back an error, then use lib_aci_radio_reset * if advertising or disconnect if in a connection. * @return True if the transaction is successfully initiated. */ bool lib_aci_sleep(void); /** @brief Resets the radio. * @details The function sends a @c BasebandReset command to the radio. * @return True if the transaction is successfully initiated. */ bool lib_aci_radio_reset(void); /** @brief Radio starts directed advertising to bonded device. * @details The function sends a @c DirectedConnect command to the radio. * @return True if the transaction is successfully initiated. */ bool lib_aci_direct_connect(void); /** @brief Gets the radio's version. * @details This function sends a @c GetDeviceVersion command. * @return True if the transaction is successfully initiated. */ bool lib_aci_device_version(void); /** @brief Gets the device address. * @details This function sends a @c GetDeviceAddress command. * @return True if the transaction is successfully initiated. */ bool lib_aci_get_address(void); /** @brief Gets the temperature. * @details This function sends a @c GetTemperature command. lib_aci * calls the @ref lib_aci_transaction_finished_hook() function when the temperature is received. * @return True if the transaction is successfully initiated. */ bool lib_aci_get_temperature(void); /** @brief Gets the battery level. * @details This function sends a @c GetBatteryLevel command. * @return True if the transaction is successfully initiated. */ bool lib_aci_get_battery_level(void); //@} /** @name ACI commands available in Sleep mode */ //@{ /** @brief Wakes up the radio. * @details This function sends a @c Wakeup command to wake up the radio from * sleep mode. When woken up the radio sends a @c DeviceStartedEvent and * a @c CommandResponseEvent. * @return True if the transaction is successfully initiated. */ bool lib_aci_wakeup(void); //@} /** @name ACI commands available in Active mode */ //@{ /** @brief Sets the radio in test mode. * @details This function sends a @c Test command to the radio. There are two * Test modes available: * - UART: DTM commands are received over UART. * - ACI: DTM commands are received over ACI. * The same command is used to exit the test mode When receiving * a @c DeviceStartedEvent the radio has entered the new mode. * @param enter_exit_test_mode Enter a Test mode, or exit Test mode. * @return True if the transaction is successfully initiated. */ bool lib_aci_test(aci_test_mode_change_t enter_exit_test_mode); /** @brief Sets the radio's TX power. * @details This function sends a @c SetTxPower command. * @param tx_power TX power to be used by the radio. * @return True if the transaction is successfully initiated. */ bool lib_aci_set_tx_power(aci_device_output_power_t tx_power); /** @brief Tries to connect to a peer device. * @details This function sends a @c Connect command to the radio. * @param run_timeout Maximum advertising time in seconds (0 means infinite). * @param adv_interval Advertising interval (in multiple of 0.625 ms). * @return True if the transaction is successfully initiated. */ bool lib_aci_connect(uint16_t run_timeout, uint16_t adv_interval); /** @brief Tries to bond with a peer device. * @details This function sends a @c Bond command to the radio. * @param run_timeout Maximum advertising time in seconds (0 means infinite). * @param adv_interval Advertising interval (in multiple of 0.625 ms). * @return True if the transaction is successfully initiated. */ bool lib_aci_bond(uint16_t run_timeout, uint16_t adv_interval); /** @brief Disconnects from peer device. * @details This function sends a @c Disconnect command to the radio. * @param reason Reason for disconnecting. * @return True if the transaction is successfully initiated. */ bool lib_aci_disconnect(aci_state_t *aci_stat, aci_disconnect_reason_t reason); /**@brief Sets Local Data. * @details * This command updates the value of the characteristic value or the characteristic descriptor stored locally on the device. * Can be called for all types of pipes as long as the data is stored locally. * @param ACI state structure * @param pipe Pipe number on which the data should be set. * @param value Pointer to the data to set. * @param size Size of the data to set. * @return True if the transaction is successfully initiated. */ bool lib_aci_set_local_data(aci_state_t *aci_stat, uint8_t pipe, uint8_t *value, uint8_t size); /** @brief Sends Broadcast message to the radio. * @details The Broadcast message starts advertisement procedure * using the given interval with the intention of broadcasting data to a peer device. * @param timeout Time, in seconds, to advertise before exiting to standby mode (0 means infinite). * Valid values: 0 to 16383. * @param adv_interval Advertising interval (in multiple of 0.625 ms). * Valid values: 160 to 16384 (which corresponds to an interval from 100 ms to 10.24 s). * @return True if the broadcast message is sent successfully to the radio. */ bool lib_aci_broadcast(const uint16_t timeout, const uint16_t adv_interval); /** @name Open Advertising Pipes. */ /** @brief Sends a command to the radio to set the input pipe to be placed in Advertisement Service Data. * @details This function sends a command to the radio that places the pipe in * advertisement service data. To start advertising service data, call this function before * Connecting, Broadcasting or Bonding to peer. The data that should be sent in the advertisement packets * must be set using the @c lib_aci_set_local_data function. This function can be called during * advertising to enable/disable broadcast pipes. * @param pipe The pipe that has to be placed in advertising service data. * @return True if the Open Adv Pipe message is sent successfully to the radio. */ bool lib_aci_open_adv_pipe(const uint8_t pipe); /** @name Open Advertising Pipes */ /** @brief Sends a command to the radio to set the pipes to be placed in Advertisement Service Data. * @details This function will send a command to the radio that will set the pipes to be placed in * advertisement Service Data. To start advertising service data, this function should be called before * Connecting, Broadcasting or Bonding to peer. This function can be called during * advertising to enable/disable broadcast pipes. Use this as an alternative to @ref lib_aci_open_adv_pipe * to avoid multiple function calls for placing multiple pipes in the adv data. * @param adv_service_data_pipes Pipe bitmap, where '1' indicates that the corresponding * Valid Values: 0000000000000000 to FEFFFFFFFFFFFF7F (See the ACI Pipe Status Evt bitmap in the nRF8001 datasheet * TX_BROADCAST pipe data is to be placed in Advertising Service Data fields * @return true if the Open Adv Pipe message was sent successfully to the radio. */ bool lib_aci_open_adv_pipes(const uint8_t * const adv_service_data_pipes); //@} /** @name ACI commands available in Connected mode */ //@{ /** @brief Sets a given application latency. * @details This function sends a @c setApplicationLatency command. * @return True if the transaction is successfully initiated. */ bool lib_aci_set_app_latency(uint16_t latency, aci_app_latency_mode_t latency_mode); /** @brief Opens a remote pipe. * @details This function sends an @c OpenRemotePipe command. * @param pipe Number of the pipe to open. * @return True if the transaction is successfully initiated. */ bool lib_aci_open_remote_pipe(aci_state_t *aci_stat, uint8_t pipe); /** @brief Closes a remote pipe. * @details This function sends an @c CloseRemotePipe command. * @param pipe Pipe number to close. * @return True if the transaction is successfully initiated. */ bool lib_aci_close_remote_pipe(aci_state_t *aci_stat, uint8_t pipe); /** @brief Sends data on a given pipe. * @details This function sends a @c SendData command with application data to * the radio. This function memorizes credit use, and checks that * enough credits are available. * @param pipe Pipe number on which the data should be sent. * @param value Pointer to the data to send. * @param size Size of the data to send. * @return True if the transaction is successfully initiated. */ bool lib_aci_send_data(uint8_t pipe, uint8_t *value, uint8_t size); /** @brief Requests data from a given pipe. * @details This function sends a @c RequestData command to the radio. This * function memorizes credit uses, and check that enough credits are available. * After this command, the radio sends back either a @c DataReceivedEvent * or a @c PipeErrorEvent. * @param pipe Pipe number on which the data is requested. * @return True if the transaction is successfully initiated. */ bool lib_aci_request_data(aci_state_t *aci_stat, uint8_t pipe); /** @brief Sends a L2CAP change connection parameters request. * @details This function sends a @c ChangeTiming command to the radio. This command triggers a "L2CAP change connection parameters" request * to the master. If the master rejects or accepts but doesn't change the connection parameters within * 30 seconds, a timing event with the unchanged connection parameters is sent by the radio. * If the request is accepted and the master changes connection parameters, a timing event with * the new connection parameters is sent by the radio. * If the master doesn't reply to the request within 60 seconds, the radio disconnects. * @param minimun_cx_interval Minimum connection interval requested, in multiple of 1.25 ms. * @param maximum_cx_interval Maximum connection interval requested, in multiple of 1.25 ms. * @param slave_latency requested slave latency. * @param timeout requested slave timeout, in multiple of 10 ms. * @return True if the transaction is successfully initiated. */ bool lib_aci_change_timing(uint16_t minimun_cx_interval, uint16_t maximum_cx_interval, uint16_t slave_latency, uint16_t timeout); /** @brief Sends a L2CAP change connection parameters request with the connection predefined preffered connection parameters. * @details This function sends a @c ChangeTiming command to the radio. This command triggers a "L2CAP change connection parameters" request * to the master. If the master rejects or accepts but doesn't change the connection parameters within * 30 seconds, a timing event with the unchanged connection parameters is sent by the radio. * If the request is accepted and the master changes connection parameters, a timing event with * the new connection parameters is sent by the radio. * If the master doesn't reply to the request within 60 seconds, the radio disconnects. * The timing parameters used are the Timing parameters in the GAP settings in the nRFgo Studio. * The Timing parameters as stored as the GAP Preferred Peripheral Connection Parameters. * @return True if the transaction is successfully initiated. */ bool lib_aci_change_timing_GAP_PPCP(void); /** @brief Sends acknowledgement message to peer. * @details This function sends @c SendDataAck command to radio. The radio is expected * to send either Handle Value Confirmation or Write response depending * on whether the data is stored remotely or locally. * @param pipe Pipe number for which the acknowledgement is to be sent. * @return True if the ack was sent successfully. False otherwise. */ bool lib_aci_send_ack(aci_state_t *aci_stat, const uint8_t pipe); /** @brief Sends negative acknowledgement message to peer. * @details This function sends @c SendDataNack command to radio. The radio is expected * to send Error Response to the peer. * @param pipe Pipe number for which the nack is to be sent. * @param error_code Error code to be sent in the NACk. * @return True if the nack was sent successfully. False otherwise. */ bool lib_aci_send_nack(aci_state_t *aci_stat, const uint8_t pipe, const uint8_t error_code); /** @brief Sends ReadDynamicData command to the host. * @details This function sends @c ReadDynamicData command to host. The host is expected * to send @c CommandResponse back with the dynamic data. The application is expected to * call this function in a loop until all the dynamic data is read out from the host. * As long as there is dynamic data to be read from the host, the command response * for this message has its status field set to ACI_STATUS_TRANSACTION_CONTINUE (0x01). * The application may chose to store this read out data in a non-volatile memory location * and later chose to write it back using the function lib_aci_write_dynamic_data. * @return True if the command was sent successfully through the ACI. False otherwise. */ bool lib_aci_read_dynamic_data(void); /** @brief Sends WriteDynamicData command to the host. * @details This function sends @c WriteDynamicData command to host. The host is expected * to send @c CommandResponse with the status of this operation. As long as the status field * in the @c CommandResponse is ACI_STATUS_TRANSACTION_CONTINUE (0x01), the hosts expects * more dynamic data to be written. This function should ideally be called in a cycle, * until all the stored dynamic data is sent to the host. This function should be * called with the dynamic data obtained from the response to a @c ReadDynamicData * (see @c lib_aci_read_dynamic_data) command. * @param sequence_number Sequence number of the dynamic data to be sent. * @param dynamic_data Pointer to the dynamic data. * @param length Length of the dynamic data. * @return True if the command was sent successfully through the ACI. False otherwise. */ bool lib_aci_write_dynamic_data(uint8_t sequence_number, uint8_t* dynamic_data, uint8_t length); //@} /** @name ACI commands available while connected in Bond mode */ //@{ /** @brief Sends a SMP Security Request. * @details This function send a @c BondRequest command to the radio. * This command triggers a SMP Security Request to the master. If the * master rejects with a pairing failed or if the bond timer expires the connection is closed. * @return True if the transaction is successfully initiated. */ bool lib_aci_bond_request(void); /** @brief Set the key requested by the 8001. * @details This function sends an @c SetKey command to the radio. * @param key_rsp_type Type of key. * @param key Pointer to the key to set. * @param len Length of the key. * @return True if the transaction is successfully initiated. */ bool lib_aci_set_key(aci_key_type_t key_rsp_type, uint8_t *key, uint8_t len); //@} /** @name ACI commands available in Test mode */ //@{ /** @brief Sends an echo message * @details This function sends an @c Echo command to the radio. lib_aci * places the Echp ACI command in the ACI command queue * @param message_size Length of the data to send. * @param message_data Pointer to the data to send. * @return True if the transaction is successfully initiated. */ bool lib_aci_echo_msg(uint8_t message_size, uint8_t *message_data); /** @brief Sends an DTM command * @details This function sends an @c DTM command to the radio. * @param dtm_command_msbyte Most significant byte of the DTM command. * @param dtm_command_lsbyte Least significant byte of the DTM command. * @return True if the transaction is successfully initiated. */ bool lib_aci_dtm_command(uint8_t dtm_command_msbyte, uint8_t dtm_command_lsbyte); /** @brief Gets an ACI event from the ACI Event Queue * @details This function gets an ACI event from the ACI event queue. * The queue is updated by the SPI driver for the ACI running in the interrupt context * @param aci_stat pointer to the state of the ACI. * @param p_aci_data pointer to the ACI Event. The ACI Event received will be copied into this pointer. * @return True if an ACI Event was copied to the pointer. */ bool lib_aci_event_get(aci_state_t *aci_stat, hal_aci_evt_t * aci_evt); /** @brief Flushes the events in the ACI command queues and ACI Event queue * */ void lib_aci_flush(void); //@} /** @} */ #endif /* LIB_ACI_H__ */