#include #include #include // Color definitions #define BLACK 0x0000 #define BLUE 0x001F #define RED 0xF800 #define GREEN 0x07E0 #define CYAN 0x07FF #define MAGENTA 0xF81F #define YELLOW 0xFFE0 #define WHITE 0xFFFF #define NBINS 12 const uint8_t bar_Width = 3; uint32_t avrg_TmrF = 0; uint16_t t_b[NBINS]; uint16_t datax_[NBINS]; /* Teensy3.x and Arduino's You are using 4 wire SPI here, so: MOSI: 11//Teensy3.x/Arduino UNO (for MEGA/DUE refere to arduino site) MISO: 12//Teensy3.x/Arduino UNO (for MEGA/DUE refere to arduino site) SCK: 13//Teensy3.x/Arduino UNO (for MEGA/DUE refere to arduino site) the rest of pin below: */ #define __CS 10 #define __DC 9 /* Teensy 3.x can use: 2,6,9,10,15,20,21,22,23 Arduino's 8 bit: any DUE: check arduino site If you do not use reset, tie it to +3V3 */ TFT_ILI9163C tft = TFT_ILI9163C(__CS, __DC); void setup(void) { Serial.begin(38400); //while(!Serial); tft.begin(); tft.setRotation(1); tft.fillScreen(BLACK); tft.setTextWrap(true); tft.setTextColor(WHITE, BLACK); tft.setCursor(0,0); } void loop(){ for (int i=0;i> 3); tft.fillRect(startX,(vOrigin+1),(bar_Width+3),dataToWidth,BLACK);//mask ok tft.fillRect(startX,(dataToWidth+vOrigin)+1,(bar_Width+3),((barHeight-2)-dataToWidth),color);//fillRect(X,Y,width,height,color) } }