/* * IRremote: IRsendDemo - demonstrates sending IR codes with IRsend * An IR LED must be connected to Arduino PWM pin 3. * Version 0.1 July, 2009 * Copyright 2009 Ken Shirriff * http://arcfn.com * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post) */ #include <IRremote.h> #define PanasonicAddress 0x4004 // Panasonic address (Pre data) #define PanasonicPower 0x100BCBD // Panasonic Power button #define JVCPower 0xC5E8 IRsend irsend; void setup() { } void loop() { irsend.sendPanasonic(PanasonicAddress,PanasonicPower); // This should turn your TV on and off irsend.sendJVC(JVCPower, 16,0); // hex value, 16 bits, no repeat delayMicroseconds(50); // see http://www.sbprojects.com/knowledge/ir/jvc.php for information irsend.sendJVC(JVCPower, 16,1); // hex value, 16 bits, repeat delayMicroseconds(50); }
