|
- case ILI9325C:
- LCD_Write_COM_DATA(0xE5, 0x78F0); // set SRAM internal timing
- LCD_Write_COM_DATA(0x01, 0x0100); // set Driver Output Control
- LCD_Write_COM_DATA(0x02, 0x0700); // set 1 line inversion
- LCD_Write_COM_DATA(0x03, 0x1030); // set GRAM write direction and BGR=1.
- LCD_Write_COM_DATA(0x04, 0x0000); // Resize register
- LCD_Write_COM_DATA(0x08, 0x0207); // set the back porch and front porch
- LCD_Write_COM_DATA(0x09, 0x0000); // set non-display area refresh cycle ISC[3:0]
- LCD_Write_COM_DATA(0x0A, 0x0000); // FMARK function
- LCD_Write_COM_DATA(0x0C, 0x0000); // RGB interface setting
- LCD_Write_COM_DATA(0x0D, 0x0000); // Frame marker Position
- LCD_Write_COM_DATA(0x0F, 0x0000); // RGB interface polarity
- //*************Power On sequence ****************//
- LCD_Write_COM_DATA(0x10, 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
- LCD_Write_COM_DATA(0x11, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
- LCD_Write_COM_DATA(0x12, 0x0000); // VREG1OUT voltage
- LCD_Write_COM_DATA(0x13, 0x0000); // VDV[4:0] for VCOM amplitude
- LCD_Write_COM_DATA(0x07, 0x0001);
- delay(200); // Dis-charge capacitor power voltage
- LCD_Write_COM_DATA(0x10, 0x1090); // SAP, BT[3:0], AP, DSTB, SLP, STB
- LCD_Write_COM_DATA(0x11, 0x0227); // Set DC1[2:0], DC0[2:0], VC[2:0]
- delay(50); // Delay 50ms
- LCD_Write_COM_DATA(0x12, 0x001F); // 0012
- delay(50); // Delay 50ms
- LCD_Write_COM_DATA(0x13, 0x1500); // VDV[4:0] for VCOM amplitude
- LCD_Write_COM_DATA(0x29, 0x0027); // 04 VCM[5:0] for VCOMH
- LCD_Write_COM_DATA(0x2B, 0x000D); // Set Frame Rate
- delay(50); // Delay 50ms
- LCD_Write_COM_DATA(0x20, 0x0000); // GRAM horizontal Address
- LCD_Write_COM_DATA(0x21, 0x0000); // GRAM Vertical Address
- // ----------- Adjust the Gamma Curve ----------//
- LCD_Write_COM_DATA(0x30, 0x0000);
- LCD_Write_COM_DATA(0x31, 0x0707);
- LCD_Write_COM_DATA(0x32, 0x0307);
- LCD_Write_COM_DATA(0x35, 0x0200);
- LCD_Write_COM_DATA(0x36, 0x0008);
- LCD_Write_COM_DATA(0x37, 0x0004);
- LCD_Write_COM_DATA(0x38, 0x0000);
- LCD_Write_COM_DATA(0x39, 0x0707);
- LCD_Write_COM_DATA(0x3C, 0x0002);
- LCD_Write_COM_DATA(0x3D, 0x1D04);
- //------------------ Set GRAM area ---------------//
- LCD_Write_COM_DATA(0x50, 0x0000); // Horizontal GRAM Start Address
- LCD_Write_COM_DATA(0x51, 0x00EF); // Horizontal GRAM End Address
- LCD_Write_COM_DATA(0x52, 0x0000); // Vertical GRAM Start Address
- LCD_Write_COM_DATA(0x53, 0x013F); // Vertical GRAM Start Address
- LCD_Write_COM_DATA(0x60, 0xA700); // Gate Scan Line
- LCD_Write_COM_DATA(0x61, 0x0001); // NDL,VLE, REV
- LCD_Write_COM_DATA(0x6A, 0x0000); // set scrolling line
- //-------------- Partial Display Control ---------//
- LCD_Write_COM_DATA(0x80, 0x0000);
- LCD_Write_COM_DATA(0x81, 0x0000);
- LCD_Write_COM_DATA(0x82, 0x0000);
- LCD_Write_COM_DATA(0x83, 0x0000);
- LCD_Write_COM_DATA(0x84, 0x0000);
- LCD_Write_COM_DATA(0x85, 0x0000);
- //-------------- Panel Control -------------------//
- LCD_Write_COM_DATA(0x90, 0x0010);
- LCD_Write_COM_DATA(0x92, 0x0600);
- LCD_Write_COM_DATA(0x07, 0x0133); // 262K color and display ON
- break;
|
