Fixed AK4558_I2C_ADDR

The address was wrongly put to 0x10 + the two hardware set bits, while
it has to be 10 decimal, or 0x0A. Silly me.

control_ak4558.h

@@ -43,7 +43,7 @@
 // Chip Address 0 pin
 // set to 'H' by default, configurable to 'L' via a jumper on bottom side of the board
 
-#define AK4558_I2C_ADDR (0x10 + (AK4558_CAD1<<1) + AK4558_CAD0)
+#define AK4558_I2C_ADDR (0x0A + (AK4558_CAD1<<1) + AK4558_CAD0)
 // datasheet page 81:
 // This address is 7 bits long followed by the eighth bit that is a data direction bit (R/W). 
 // The most significant five bits of the slave address are fixed as “00100”. The next bits are