control_sgtl5000.* overhaul with many renames.

While changing everything else I also modified most things regarding
gain or volume from using 0 to 100 (or -100 thru 0 to 100) to using 1
(or -1 to 1) with only one exception I can think of right now in the
autoVolumeControl(..); - I modified all examples I found .volume or
similar in to suit.

I found opportunity to write these changes, I did not have a chance to
test much more extensively than just compiling it. I will have a chance
to test them by about 24 hours time.

control_sgtl5000.cpp

@@ -532,13 +532,13 @@ bool AudioControlSGTL5000::enable(void)
 	write(CHIP_ANA_HP_CTRL, 0x7F7F); // set volume (lowest level)
 	write(CHIP_ANA_CTRL, 0x0136);  // enable zero cross detectors
 	//mute = false;
+	semi_automated = true;
 	return true;
 }
 
 unsigned int AudioControlSGTL5000::read(unsigned int reg)
 {
 	unsigned int val;
-
 	Wire.beginTransmission(SGTL5000_I2C_ADDR);
 	Wire.write(reg >> 8);
 	Wire.write(reg);
@@ -605,26 +605,26 @@ bool AudioControlSGTL5000::volume(float left, float right)
 
 
 // CHIP_LINE_OUT_VOL
-unsigned short AudioControlSGTL5000::lo_lvl(uint8_t n)
+unsigned short AudioControlSGTL5000::lineOutLevel(uint8_t n)
 {
 	n&=31;
 	return modify(CHIP_LINE_OUT_VOL,(n<<8)|n,(31<<8)|31);
 }
 
-unsigned short AudioControlSGTL5000::lo_lvl(uint8_t left, uint8_t right)
+unsigned short AudioControlSGTL5000::lineOutLevel(uint8_t left, uint8_t right)
 {
 	left&=31;
 	right&=31;
 	return modify(CHIP_LINE_OUT_VOL,(right<<8)|left,(31<<8)|31);
 }
 
-unsigned short AudioControlSGTL5000::dac_vol(float n) // set both directly
+unsigned short AudioControlSGTL5000::dacVolume(float n) // set both directly
 {
 	if(read(CHIP_ADCDAC_CTRL)&(3<<2)!=((n>0 ? 0:3)<<2)) modify(CHIP_ADCDAC_CTRL,(n>0 ? 0:3)<<2,3<<2);
 	unsigned char m=calcVol(n,0xC0);
 	return modify(CHIP_DAC_VOL,((0xFC-m)<<8)|(0xFC-m),65535);
 }
-unsigned short AudioControlSGTL5000::dac_vol(float left, float right)
+unsigned short AudioControlSGTL5000::dacVolume(float left, float right)
 {
 	unsigned short adcdac=((right>0 ? 0:2)|(left>0 ? 0:1))<<2;
 	if(read(CHIP_ADCDAC_CTRL)&(3<<2)!=adcdac)  modify(CHIP_ADCDAC_CTRL,adcdac,1<<2);
@@ -632,23 +632,23 @@ unsigned short AudioControlSGTL5000::dac_vol(float left, float right)
 	return modify(CHIP_DAC_VOL,m,65535);
 }
 
-unsigned short AudioControlSGTL5000::adc_hpf(uint8_t bypass, uint8_t freeze)
+unsigned short AudioControlSGTL5000::adcHighPassFilterControl(uint8_t bypass, uint8_t freeze)
 {
 	return modify(CHIP_ADCDAC_CTRL, (freeze&1)<<1|bypass&1,3);
 }
 
-unsigned short AudioControlSGTL5000::adc_hpf(uint8_t bypass)
+unsigned short AudioControlSGTL5000::adcHighPassFilterControl(uint8_t bypass)
 {
 	return modify(CHIP_ADCDAC_CTRL, bypass&1,1);
 }
 
 
 // DAP_CONTROL
-unsigned short AudioControlSGTL5000::dap_mix_enable(uint8_t n)
+unsigned short AudioControlSGTL5000::audioMixerEnable(uint8_t n)
 {
 	return modify(DAP_CONTROL,(n&1)<<4,1<<4);
 }
-unsigned short AudioControlSGTL5000::dap_enable(uint8_t n)
+unsigned short AudioControlSGTL5000::audioProcessorEnable(uint8_t n)
 {
 	if(n) n=1;
 	unsigned char i2s_sel=3*n; // ADC if n==0 else DAP
@@ -656,52 +656,50 @@ unsigned short AudioControlSGTL5000::dap_enable(uint8_t n)
 	return route(i2s_sel,SGTL_I2S_TEENSY,SGTL_ADC);
 }
 
-unsigned short AudioControlSGTL5000::dap_enable(void)
+unsigned short AudioControlSGTL5000::audioProcessorEnable(void)
 {
-	return dap_enable(1);
+	return audioProcessorEnable(1);
 }
 
 // DAP_PEQ
-unsigned short AudioControlSGTL5000::dap_peqs(uint8_t n) // valid to n&7, 0 thru 7 filters enabled.
+unsigned short AudioControlSGTL5000::eqFilterCount(uint8_t n) // valid to n&7, 0 thru 7 filters enabled.
 {
 	return modify(DAP_PEQ,(n&7),7);
 }
 
 // DAP_AUDIO_EQ
-unsigned short AudioControlSGTL5000::dap_audio_eq(uint8_t n) // 0=NONE, 1=PEQ (7 IIR Biquad filters), 2=TONE (tone), 3=GEQ (5 band EQ)
+unsigned short AudioControlSGTL5000::eqSelect(uint8_t n) // 0=NONE, 1=PEQ (7 IIR Biquad filters), 2=TONE (tone), 3=GEQ (5 band EQ)
 {
 	return modify(DAP_AUDIO_EQ,n&3,3);
 }
 
-
-// DAP_AUDIO_EQ_BASS_BAND0 & DAP_AUDIO_EQ_BAND1 & DAP_AUDIO_EQ_BAND2 etc etc
-unsigned short AudioControlSGTL5000::dap_audio_eq_band(uint8_t bandNum, float n) // by signed percentage -100/+100; dap_audio_eq(3);
-{ // 0x00==-12dB, 0x2F==0dB, 0x5F==12dB
-	n=((n/100)*48)+0.499;
-	if(n<-47) n=-47;
-	if(n>48) n=48;
-	n+=47;
-	return modify(DAP_AUDIO_EQ_BASS_BAND0+(bandNum*2),(unsigned int)n,127);
+unsigned short AudioControlSGTL5000::eqBand(uint8_t bandNum, float n)
+{
+	if(semi_automated) automate(1,3);
+	return dap_audio_eq_band(bandNum, n);
 }
-void AudioControlSGTL5000::dap_audio_eq_geq(float bass, float mid_bass, float midrange, float mid_treble, float treble)
+void AudioControlSGTL5000::eqBands(float bass, float mid_bass, float midrange, float mid_treble, float treble)
 {
+	if(semi_automated) automate(1,3);
 	dap_audio_eq_band(0,bass);
 	dap_audio_eq_band(1,mid_bass);
 	dap_audio_eq_band(2,midrange);
 	dap_audio_eq_band(3,mid_treble);
 	dap_audio_eq_band(4,treble);
 }
-void AudioControlSGTL5000::dap_audio_eq_tone(float bass, float treble) // dap_audio_eq(2);
+void AudioControlSGTL5000::eqBands(float bass, float treble) // dap_audio_eq(2);
 {
+	if(semi_automated) automate(1,2);
 	dap_audio_eq_band(0,bass);
 	dap_audio_eq_band(4,treble);
 }
 
 // SGTL5000 PEQ Coefficient loader
-void AudioControlSGTL5000::load_peq(uint8_t filterNum, int *filterParameters)
+void AudioControlSGTL5000::eqFilter(uint8_t filterNum, int *filterParameters)
 {
-	// 1111 11111111 11111111
-
+	// TODO: add the part that selects 7 PEQ filters.
+	if(semi_automated) automate(1,1,filterNum+1);
+	modify(DAP_FILTER_COEF_ACCESS,(uint16_t)filterNum,15); 
 	write(DAP_COEF_WR_B0_MSB,(*filterParameters>>4)&65535);
 	write(DAP_COEF_WR_B0_LSB,(*filterParameters++)&15);
 	write(DAP_COEF_WR_B1_MSB,(*filterParameters>>4)&65535);
@@ -713,8 +711,6 @@ void AudioControlSGTL5000::load_peq(uint8_t filterNum, int *filterParameters)
 	write(DAP_COEF_WR_A2_MSB,(*filterParameters>>4)&65535);
 	write(DAP_COEF_WR_A2_LSB,(*filterParameters++)&15);
 	write(DAP_FILTER_COEF_ACCESS,(uint16_t)0x100|filterNum);
-	delay(10); // seems necessary, didn't work for 1ms.
-	modify(DAP_FILTER_COEF_ACCESS,(uint16_t)filterNum,15); 
 }
 
 /* Valid values for dap_avc parameters
@@ -743,8 +739,9 @@ void AudioControlSGTL5000::load_peq(uint8_t filterNum, int *filterParameters)
 	decay
 	floating point figure is dB/s rate at which gain is reduced
 */
-unsigned short AudioControlSGTL5000::dap_avc(uint8_t maxGain, uint8_t lbiResponse, uint8_t hardLimit, float threshold, float attack, float decay)
+unsigned short AudioControlSGTL5000::autoVolumeControl(uint8_t maxGain, uint8_t lbiResponse, uint8_t hardLimit, float threshold, float attack, float decay)
 {
+	if(semi_automated&&(!read(DAP_CONTROL)&1)) audioProcessorEnable(1);
 	if(maxGain>2) maxGain=2;
 	lbiResponse&=3;
 	hardLimit&=1;
@@ -756,59 +753,82 @@ unsigned short AudioControlSGTL5000::dap_avc(uint8_t maxGain, uint8_t lbiRespons
 	write(DAP_AVC_DECAY,dec);
 	return 	modify(DAP_AVC_CTRL,maxGain<<12|lbiResponse<<8|hardLimit<<5,3<<12|3<<8|1<<5);
 }
-unsigned short AudioControlSGTL5000::dap_avc_enable(uint8_t n)
+unsigned short AudioControlSGTL5000::autoVolumeEnable(uint8_t n)
 {
 	n&=1;
 	return modify(DAP_AVC_CTRL,n,1);
 }
-unsigned short AudioControlSGTL5000::dap_avc_enable(void)
+unsigned short AudioControlSGTL5000::autoVolumeEnable(void)
 {
 	return modify(DAP_AVC_CTRL,1,1);
 }
 
-unsigned short AudioControlSGTL5000::dap_bass_enhance(float lr_lev, float bass_lev)
+unsigned short AudioControlSGTL5000::enhanceBass(float lr_lev, float bass_lev)
 {
 	return modify(DAP_BASS_ENHANCE_CTRL,(0x3F-calcVol(lr_lev,0x3F))<<8|0x7F-calcVol(bass_lev,0x7F),0x3F<<8|0x7F);
 }
-unsigned short AudioControlSGTL5000::dap_bass_enhance(float lr_lev, float bass_lev, uint8_t hpf_bypass, uint8_t cutoff)
+unsigned short AudioControlSGTL5000::enhanceBass(float lr_lev, float bass_lev, uint8_t hpf_bypass, uint8_t cutoff)
 {
 	modify(DAP_BASS_ENHANCE,(hpf_bypass&1)<<8|(cutoff&7)<<4,1<<8|7<<4);
-	return dap_bass_enhance(lr_lev,bass_lev);
+	return enhanceBass(lr_lev,bass_lev);
 }
-unsigned short AudioControlSGTL5000::dap_bass_enhance_enable(uint8_t n)
+unsigned short AudioControlSGTL5000::enhanceBassEnable(uint8_t n)
 {
 	return modify(DAP_BASS_ENHANCE,n&1,1);
 }
-unsigned short AudioControlSGTL5000::dap_bass_enhance_enable(void)
+unsigned short AudioControlSGTL5000::enhanceBassEnable(void)
 {
-	return dap_bass_enhance_enable(1);
+	return enhanceBassEnable(1);
 }
-unsigned short AudioControlSGTL5000::dap_surround(uint8_t width)
+unsigned short AudioControlSGTL5000::surroundSound(uint8_t width)
 {
 	return modify(DAP_SGTL_SURROUND,(width&7)<<4,7<<4);
 }
-unsigned short AudioControlSGTL5000::dap_surround(uint8_t width, uint8_t select)
+unsigned short AudioControlSGTL5000::surroundSound(uint8_t width, uint8_t select)
 {
 	return modify(DAP_SGTL_SURROUND,(width&7)<<4|select&3,7<<4|3);
 }
-unsigned short AudioControlSGTL5000::dap_surround_enable(uint8_t n)
+unsigned short AudioControlSGTL5000::surroundSoundEnable(uint8_t n)
 {
 	if(n) n=3;
 	return modify(DAP_SGTL_SURROUND,n,3);
 }
-unsigned short AudioControlSGTL5000::dap_surround_enable(void)
+unsigned short AudioControlSGTL5000::surroundSoundEnable(void)
 {
-	dap_surround_enable(1);
+	surroundSoundEnable(1);
 }
 
 
 unsigned char AudioControlSGTL5000::calcVol(float n, unsigned char range)
 {
-	n=(n*(((float)range)/100))+0.499;
+	// n=(n*(((float)range)/100))+0.499;
+	n=(n*((float)range))+0.499;
 	if ((unsigned char)n>range) n=range;
 	return (unsigned char)n;
 }
 
+// DAP_AUDIO_EQ_BASS_BAND0 & DAP_AUDIO_EQ_BAND1 & DAP_AUDIO_EQ_BAND2 etc etc
+unsigned short AudioControlSGTL5000::dap_audio_eq_band(uint8_t bandNum, float n) // by signed percentage -100/+100; dap_audio_eq(3);
+{
+	n=((n/1)*48)+0.499;
+	if(n<-47) n=-47;
+	if(n>48) n=48;
+	n+=47;
+	return modify(DAP_AUDIO_EQ_BASS_BAND0+(bandNum*2),(unsigned int)n,127);
+}
+
+void AudioControlSGTL5000::automate(uint8_t dap, uint8_t eq)
+{
+	if((dap!=0)&&(!read(DAP_CONTROL)&1)) audioProcessorEnable(1);
+	if(read(DAP_AUDIO_EQ)&3!=eq) eqSelect(eq);
+}
+
+void AudioControlSGTL5000::automate(uint8_t dap, uint8_t eq, uint8_t filterCount)
+{
+	automate(dap,eq);
+	if(filterCount>read(DAP_PEQ)&7) eqFilterCount(filterCount);
+}
+
 
 // if(SGTL5000_PEQ) quantization_unit=524288; if(AudioFilterBiquad) quantization_unit=2147483648;
 void calcBiquad(uint8_t filtertype, float fC, float dB_Gain, float Q, uint32_t quantization_unit, uint32_t fS, int *coef)

control_sgtl5000.h

@@ -38,7 +38,7 @@ class AudioControlSGTL5000 : public AudioControl
 public:
 	bool enable(void);
 	bool disable(void) { return false; }
-	bool volume(float n) { return volumeInteger(n * 1.29 + 0.499); }
+	bool volume(float n) { return volumeInteger(n * 129 + 0.499); }
 	bool inputLevel(float n) {return false;}
 	bool muteHeadphone(void) { return write(0x0024, ana_ctrl | (1<<4)); }
 	bool unmuteHeadphone(void) { return write(0x0024, ana_ctrl & ~(1<<4)); }
@@ -61,34 +61,35 @@ public:
 	unsigned short route(uint8_t i2s_out, uint8_t dac, uint8_t dap) { return route(i2s_out,dac,dap,0); }
 	bool volume(float left, float right);
 	unsigned short micGain(unsigned int n) { return modify(0x002A, n&3, 3); }
-	unsigned short lo_lvl(uint8_t n);
-	unsigned short lo_lvl(uint8_t left, uint8_t right);
-	unsigned short dac_vol(float n);
-	unsigned short dac_vol(float left, float right);
-	unsigned short adc_hpf(uint8_t bypass, uint8_t freeze);
-	unsigned short adc_hpf(uint8_t bypass);
-	unsigned short dap_mix_enable(uint8_t n);
-	unsigned short dap_enable(uint8_t n);
-	unsigned short dap_enable(void);
-	unsigned short dap_peqs(uint8_t n);
-	unsigned short dap_audio_eq(uint8_t n);
-	unsigned short dap_audio_eq_band(uint8_t bandNum, float n);
-	void dap_audio_eq_geq(float bass, float mid_bass, float midrange, float mid_treble, float treble);
-	void dap_audio_eq_tone(float bass, float treble);
-	void load_peq(uint8_t filterNum, int *filterParameters);
-	unsigned short dap_avc(uint8_t maxGain, uint8_t lbiResponse, uint8_t hardLimit, float threshold, float attack, float decay);
-	unsigned short dap_avc_enable(uint8_t n);
-	unsigned short dap_avc_enable(void);
-	unsigned short dap_bass_enhance(float lr_lev, float bass_lev);
-	unsigned short dap_bass_enhance(float lr_lev, float bass_lev, uint8_t hpf_bypass, uint8_t cutoff);
-	unsigned short dap_bass_enhance_enable(uint8_t n);
-	unsigned short dap_bass_enhance_enable(void);
-	unsigned short dap_surround(uint8_t width);
-	unsigned short dap_surround(uint8_t width, uint8_t select);
-	unsigned short dap_surround_enable(uint8_t n);
-	unsigned short dap_surround_enable(void);
+	unsigned short lineOutLevel(uint8_t n);
+	unsigned short lineOutLevel(uint8_t left, uint8_t right);
+	unsigned short dacVolume(float n);
+	unsigned short dacVolume(float left, float right);
+	unsigned short adcHighPassFilterControl(uint8_t bypass, uint8_t freeze);
+	unsigned short adcHighPassFilterControl(uint8_t bypass);
+	unsigned short audioMixerEnable(uint8_t n);
+	unsigned short audioProcessorEnable(uint8_t n);
+	unsigned short audioProcessorEnable(void);
+	unsigned short eqFilterCount(uint8_t n);
+	unsigned short eqSelect(uint8_t n);
+	unsigned short eqBand(uint8_t bandNum, float n);
+	void eqBands(float bass, float mid_bass, float midrange, float mid_treble, float treble);
+	void eqBands(float bass, float treble);
+	void eqFilter(uint8_t filterNum, int *filterParameters);
+	unsigned short autoVolumeControl(uint8_t maxGain, uint8_t lbiResponse, uint8_t hardLimit, float threshold, float attack, float decay);
+	unsigned short autoVolumeEnable(uint8_t n);
+	unsigned short autoVolumeEnable(void);
+	unsigned short enhanceBass(float lr_lev, float bass_lev);
+	unsigned short enhanceBass(float lr_lev, float bass_lev, uint8_t hpf_bypass, uint8_t cutoff);
+	unsigned short enhanceBassEnable(uint8_t n);
+	unsigned short enhanceBassEnable(void);
+	unsigned short surroundSound(uint8_t width);
+	unsigned short surroundSound(uint8_t width, uint8_t select);
+	unsigned short surroundSoundEnable(uint8_t n);
+	unsigned short surroundSoundEnable(void);
+	void killAutomation(void) { semi_automated=false; }
 
-	protected:
+protected:
 	bool muted;
 	bool volumeInteger(unsigned int n); // range: 0x00 to 0x80
 	uint16_t ana_ctrl;
@@ -98,6 +99,11 @@ public:
 	unsigned int read(unsigned int reg);
 	bool write(unsigned int reg, unsigned int val);
 	unsigned int modify(unsigned int reg, unsigned int val, unsigned int iMask);
+	unsigned short dap_audio_eq_band(uint8_t bandNum, float n);
+private:
+	bool semi_automated;
+	void automate(uint8_t dap, uint8_t eq);
+	void automate(uint8_t dap, uint8_t eq, uint8_t filterCount);
 };
 
 //For Filter Type: 0 = LPF, 1 = HPF, 2 = BPF, 3 = NOTCH, 4 = PeakingEQ, 5 = LowShelf, 6 = HighShelf

examples/CalcBiquadToneControl/CalcBiquadToneControl.ino

@@ -38,7 +38,7 @@ void setup() {
   // Enable the audio shield, select the input and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(75);
+  audioShield.volume(0.75);
   audioShield.unmuteLineout();
 
   calcBiquad(FILTER_PARAEQ,110,0,0.2,2147483648,44100,updateFilter);
@@ -47,8 +47,6 @@ void setup() {
   calcBiquad(FILTER_PARAEQ,4400,0,0.167,2147483648,44100,updateFilter);
   filterTone_L.updateCoefs(1,updateFilter);
   filterTone_R.updateCoefs(1,updateFilter);
-  
-  Serial.begin(9600);
 }
 
 elapsedMillis chgMsec=0;

examples/DialTone_DTMF/DialTone_DTMF.ino

@@ -44,7 +44,7 @@ void setup() {
 
   // Enable the audio shield and set the output volume.
   audioShield.enable();
-  audioShield.volume(82);
+  audioShield.volume(0.82);
   
   while (!Serial) ;
   delay(100);

examples/FFT/FFT.ino

@@ -31,7 +31,7 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(60);
+  audioShield.volume(0.6);
 }
 
 void loop() {

examples/Filter/Filter.ino

@@ -37,7 +37,7 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(60);
+  audioShield.volume(0.6);
 }
 
 elapsedMillis volmsec=0;
@@ -46,7 +46,7 @@ void loop() {
   // every 50 ms, adjust the volume
   if (volmsec > 50) {
     float vol = analogRead(15);
-    vol = vol / 10.24;
+    vol = vol / 1024;
     audioShield.volume(vol);
     volmsec = 0;
   }

examples/PassThrough/PassThrough.ino

@@ -32,7 +32,7 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(60);
+  audioShield.volume(0.6);
 }
 
 elapsedMillis volmsec=0;

examples/PassThroughAnalog/PassThroughAnalog.ino

@@ -28,7 +28,7 @@ void setup() {
 
   // Enable the audio shield and set the output volume.
   audioShield.enable();
-  audioShield.volume(60);
+  audioShield.volume(0.6);
 }
 
 void loop() {

examples/PassThroughPlusTone/PassThroughPlusTone.ino

@@ -52,7 +52,7 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(60);
+  audioShield.volume(0.60);
 }
 
 elapsedMillis volmsec=0;

examples/PlayFromSketch/PlayFromSketch.ino

@@ -68,7 +68,7 @@ void setup() {
 
   // turn on the output
   audioShield.enable();
-  audioShield.volume(50);
+  audioShield.volume(0.5);
 
   // by default the Teensy 3.1 DAC uses 3.3Vp-p output
   // if your 3.3V power has noise, switching to the

examples/PlayMidiTones/PlayMidiTones.ino

@@ -61,7 +61,7 @@ void setup()
   AudioMemory(8);
   
   codec.enable();
-  codec.volume(volume);
+  codec.volume(0.5);
   // I want output on the line out too
   codec.unmuteLineout();
 
@@ -108,7 +108,7 @@ if(0) {
   int n = analogRead(15);
   if (n != volume) {
     volume = n;
-    codec.volume((float)n / 10.23);
+    codec.volume((float)n / 1023);
   }
   
   c = *sp++;

examples/PlaySynthMusic/PlaySynthMusic.ino

@@ -84,7 +84,7 @@ void setup()
   AudioMemory(10);
   
   codec.enable();
-  codec.volume(volume);
+  codec.volume(0.5);
   // I want output on the line out too
   // Comment this if you don't it
   codec.unmuteLineout();
@@ -135,7 +135,7 @@ if(0) {
   int n = analogRead(15);
   if (n != volume) {
     volume = n;
-    codec.volume((float)n / 10.23);
+    codec.volume((float)n / 1023);
   }
   
   c = *sp++;

examples/PlayWavFromSdCard/PlayWavFromSdCard.ino

@@ -25,7 +25,7 @@ void setup() {
   AudioMemory(5);
 
   audioShield.enable();
-  audioShield.volume(20);
+  audioShield.volume(0.5);
 
   SPI.setMOSI(7);
   SPI.setSCK(14);
@@ -36,7 +36,7 @@ void setup() {
 
 void loop() {
   float vol = analogRead(15);
-  vol = vol / 10.24;
+  vol = vol / 1024;
   audioShield.volume(vol);
   delay(20);
 }

examples/SGTL5000_Specific/CalcBiquadToneControlDAP/CalcBiquadToneControlDAP.ino

@@ -30,16 +30,15 @@ void setup() {
   // Enable the audio shield, select the input and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(75);
+  audioShield.volume(0.75);
   audioShield.unmuteLineout();
-  audioShield.dap_enable(); // enable the DAP block in SGTL5000
-  audioShield.dap_audio_eq(1); // using PEQ Biquad filters
-  audioShield.dap_peqs(2); // enable filter 0 & filter 1
-
-  calcBiquad(FILTER_PARAEQ,110,0,0.2,524288,44100,updateFilter);
-  audioShield.load_peq(0,updateFilter);
+  // audioShield.audioProcessorEnable(); // enable the DAP block in SGTL5000
+  // audioShield.eqSelect(1); // using PEQ Biquad filters
+  // audioShield.eqFilterCount(2); // enable filter 0 & filter 1
+  calcBiquad(FILTER_PARAEQ,110,0,0.2,524288,44100,updateFilter); // automation negates the need
+  audioShield.eqFilter(0,updateFilter); // for the three lines commented out above.
   calcBiquad(FILTER_PARAEQ,4400,0,0.167,524288,44100,updateFilter);
-  audioShield.load_peq(1,updateFilter);
+  audioShield.eqFilter(1,updateFilter);
 }
 
 elapsedMillis chgMsec=0;
@@ -55,9 +54,9 @@ void loop() {
     {
       // calcBiquad(FilterType,FrequencyC,dBgain,Q,QuantizationUnit,SampleRate,int*);
       calcBiquad(FILTER_PARAEQ,110,-tone2,0.2,524288,44100,updateFilter);
-      audioShield.load_peq(0,updateFilter);
+      audioShield.eqFilter(0,updateFilter);
       calcBiquad(FILTER_PARAEQ,4400,tone2,0.167,524288,44100,updateFilter);
-      audioShield.load_peq(1,updateFilter);
+      audioShield.eqFilter(1,updateFilter);
       tone1=tone2;
     }
     chgMsec = 0;

examples/SGTL5000_Specific/balanceDAC/balanceDAC.ino

@@ -34,7 +34,7 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(75);
+  audioShield.volume(0.75);
   audioShield.unmuteLineout();
 }
 
@@ -45,17 +45,17 @@ void loop() {
   // every 10 ms, check for adjustment
   if (chgMsec > 10) {
     float bal1=analogRead(15);
-    bal1=((bal1-512)/512)*100;
+    bal1=((bal1-512)/512);
     bal1=(int)bal1;
     if(lastBal!=bal1)
     {
       if(bal1<0)
       { // leaning toward left...
-        audioShield.dac_vol(100,100+bal1);
+        audioShield.dacVolume(1,1+bal1);
       } else if(bal1>0) { // to the right
-        audioShield.dac_vol(100-bal1,100);
+        audioShield.dacVolume(1-bal1,1);
       } else { // middle
-        audioShield.dac_vol(100);
+        audioShield.dacVolume(1);
       }
       lastBal=bal1;
     }

examples/SGTL5000_Specific/balanceHP/balanceHP.ino

@@ -34,28 +34,28 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(60);
+  audioShield.volume(0.75);
   audioShield.unmuteLineout();
 }
 
 elapsedMillis chgMsec=0;
 
 float lastBal=1024;
-float vol1=75;
+float vol1=0.75;
 
 void loop() {
   // every 10 ms, check for adjustment
   if (chgMsec > 10) {
     float bal1=analogRead(15);
-    bal1=((bal1-512)/512)*100;
+    bal1=((bal1-512)/512);
     bal1=(int)bal1;
     if(lastBal!=bal1)
     {
       if(bal1<0)
       {
-        audioShield.volume(vol1,(vol1/100)*(100+bal1));
+        audioShield.volume(vol1,vol1*(1+bal1));
       } else {
-        audioShield.volume((vol1/100)*(100-bal1),vol1);
+        audioShield.volume(vol1*(1-bal1),vol1);
       }
       lastBal=bal1;
     }

examples/SGTL5000_Specific/dap_avc_agc/dap_avc_agc.ino

@@ -34,14 +34,12 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(75);
+  audioShield.volume(0.75);
   audioShield.unmuteLineout();
-  // have to enable DAP to use AVC
-  audioShield.dap_enable();
   // here are some settings for AVC that have a fairly obvious effect
-  audioShield.dap_avc(2,1,0,-5,0.5,0.5); // see comments starting line #699 of control_sgtl5000.cpp in ./libraries/audio/
+  audioShield.autoVolumeControl(2,1,0,-5,0.5,0.5); // see comments starting line #699 of control_sgtl5000.cpp in ./libraries/audio/
   // AVC has its own enable/disable bit
-  audioShield.dap_avc_enable(); // you can use audioShield.dap_avc_enable(0); to turn off AVC
+  // you can use audioShield.autoVolumeEnable(0); to turn off AVC
 }
 
 elapsedMillis chgMsec=0;

examples/SGTL5000_Specific/dap_bass_enhance/dap_bass_enhance.ino

@@ -34,13 +34,12 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(75);
+  audioShield.volume(0.75);
   audioShield.unmuteLineout();
-  // have to enable DAP to use bass enhance
-  audioShield.dap_enable();
-  audioShield.dap_bass_enhance_enable(); // all we need to do for default bass enhancement settings.
-  // audioShield.dap_bass_enhance((float)lr_level,(float)bass_level);
-  // audioShield.dap_bass_enhance((float)lr_level,(float)bass_level,(uint8_t)hpf_bypass,(uint8_t)cutoff);
+  // just enable it to use default settings.
+  audioShield.enhanceBassEnable(); // all we need to do for default bass enhancement settings.
+  // audioShield.enhanceBass((float)lr_level,(float)bass_level);
+  // audioShield.enhanceBass((float)lr_level,(float)bass_level,(uint8_t)hpf_bypass,(uint8_t)cutoff);
   // please see http://www.pjrc.com/teensy/SGTL5000.pdf page 50 for valid values for BYPASS_HPF and CUTOFF
 }
 

examples/SpectrumAnalyzer/SpectrumAnalyzer.ino

@@ -43,7 +43,7 @@ void setup() {
   // Enable the audio shield and set the output volume.
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(60);
+  audioShield.volume(0.6);
   
   lcd.begin(16, 2);
   lcd.print("Audio Spectrum");

examples/StereoPeakMeter/StereoPeakMeter.ino

@@ -27,7 +27,7 @@ void setup() {
   AudioMemory(6);
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(75);
+  audioShield.volume(0.75);
   audioShield.unmuteLineout();
   Serial.begin(Serial.baud());
 }

examples/ToneSweep/ToneSweep.ino

@@ -56,7 +56,7 @@ void setup(void)
   AudioMemory(2);
 
   audioShield.enable();
-  audioShield.volume(50);
+  audioShield.volume(0.5);
     // I want output on the line out too
   audioShield.unmuteLineout();
 //  audioShield.muteHeadphone();

examples/effect_chorus/effect_chorus.ino

@@ -96,7 +96,7 @@ void setup() {
 
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(50);
+  audioShield.volume(0.5);
   
   // Warn that the passthru pin is grounded
   if(!digitalRead(PASSTHRU_PIN)) {
@@ -134,7 +134,7 @@ void loop()
   int n = analogRead(15);
   if (n != volume) {
     volume = n;
-    audioShield.volume((float)n / 10.23);
+    audioShield.volume((float)n / 1023);
   }
 if(0) {
   if(millis() - last_time >= 5000) {

examples/effect_flange/effect_flange.ino

@@ -157,7 +157,7 @@ void setup() {
 
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(50);
+  audioShield.volume(0.5);
   
   // Warn that the passthru pin is grounded
   if(!digitalRead(PASSTHRU_PIN)) {

examples/fir_filter/fir_filter.ino

@@ -82,7 +82,7 @@ void setup() {
 
   audioShield.enable();
   audioShield.inputSelect(myInput);
-  audioShield.volume(50);
+  audioShield.volume(0.5);
   
   // Warn that the passthru pin is grounded
   if(!digitalRead(PASSTHRU_PIN)) {
@@ -115,7 +115,7 @@ void loop()
   int n = analogRead(15);
   if (n != volume) {
     volume = n;
-    audioShield.volume((float)n / 10.23);
+    audioShield.volume((float)n / 1023);
   }
   
   // update the two buttons