visus
/
teensy-audio
Observar 1
Favorito 0
Fork 0
Código Issues 0 Pull requests 0 Versões 0 Wiki Atividade
Ver código fonte

Merge pull request #284 from FrankBoesing/master 

Inputs: I2S, I2S2; Outputs: I2S2, TDM, TDM2
dds
Paul Stoffregen 5 anos atrás
pai
bd7aea87e9 33eece1548
commit
5d1c0e9f4b
Nenhuma conta vinculada ao e-mail do autor do commit
17 arquivos alterados com 1571 adições e 239 exclusões
Visão dividida Mostrar estatísticas do Diff
  1. +4
    -0
      Audio.h
  2. +213
    -0
      input_i2s2.cpp
  3. +62
    -0
      input_i2s2.h
  4. +5
    -0
      keywords.txt
  5. +2
    -46
      output_i2s.cpp
  6. +0
    -23
      output_i2s.h
  7. +39
    -133
      output_i2s2.cpp
  8. +6
    -6
      output_i2s2.h
  9. +229
    -0
      output_mqs.cpp
  10. +58
    -0
      output_mqs.h
  11. +103
    -24
      output_pt8211.cpp
  12. +0
    -2
      output_pt8211.h
  13. +427
    -0
      output_pt8211_2.cpp
  14. +67
    -0
      output_pt8211_2.h
  15. +96
    -5
      output_tdm.cpp
  16. +206
    -0
      output_tdm2.cpp
  17. +54
    -0
      output_tdm2.h

+ 4
- 0
Audio.h Ver arquivo

@@ -91,6 +91,7 @@
#include "input_adc.h"
#include "input_adcs.h"
#include "input_i2s.h"
#include "input_i2s2.h"
#include "input_i2s_quad.h"
#include "input_tdm.h"
#include "input_pdm.h"
@@ -100,10 +101,13 @@
#include "output_i2s.h"
#include "output_i2s2.h"
#include "output_i2s_quad.h"
#include "output_mqs.h"
#include "output_pwm.h"
#include "output_spdif.h"
#include "output_pt8211.h"
#include "output_pt8211_2.h"
#include "output_tdm.h"
#include "output_tdm2.h"
#include "output_adat.h"
#include "play_memory.h"
#include "play_queue.h"

+ 213
- 0
input_i2s2.cpp Ver arquivo

@@ -0,0 +1,213 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/


#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#include <Arduino.h>
#include "input_i2s2.h"
#include "output_i2s2.h"

static uint32_t i2s2_rx_buffer[AUDIO_BLOCK_SAMPLES];
audio_block_t * AudioInputI2S2::block_left = NULL;
audio_block_t * AudioInputI2S2::block_right = NULL;
uint16_t AudioInputI2S2::block_offset = 0;
bool AudioInputI2S2::update_responsibility = false;
DMAChannel AudioInputI2S2::dma(false);


void AudioInputI2S2::begin(void)
{
dma.begin(true); // Allocate the DMA channel first

//block_left_1st = NULL;
//block_right_1st = NULL;

// TODO: should we set & clear the I2S_RCSR_SR bit here?
AudioOutputI2S2::config_i2s();

CORE_PIN33_CONFIG = 2; //2:RX_DATA0
IOMUXC_SAI2_RX_DATA0_SELECT_INPUT = 0;

dma.TCD->SADDR = (void *)((uint32_t)&I2S2_RDR0+2);
dma.TCD->SOFF = 0;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = 0;
dma.TCD->DADDR = i2s2_rx_buffer;
dma.TCD->DOFF = 2;
dma.TCD->CITER_ELINKNO = sizeof(i2s2_rx_buffer) / 2;
dma.TCD->DLASTSGA = -sizeof(i2s2_rx_buffer);
dma.TCD->BITER_ELINKNO = sizeof(i2s2_rx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_RX);

I2S2_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE;
I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE;

update_responsibility = update_setup();
dma.enable();
dma.attachInterrupt(isr);
//pinMode(13, OUTPUT);
}

void AudioInputI2S2::isr(void)
{
uint32_t daddr, offset;
const int16_t *src, *end;
int16_t *dest_left, *dest_right;
audio_block_t *left, *right;

//digitalWriteFast(13, HIGH);
daddr = (uint32_t)(dma.TCD->DADDR);
dma.clearInterrupt();

if (daddr < (uint32_t)i2s2_rx_buffer + sizeof(i2s2_rx_buffer) / 2) {
// DMA is receiving to the first half of the buffer
// need to remove data from the second half
src = (int16_t *)&i2s2_rx_buffer[AUDIO_BLOCK_SAMPLES/2];
end = (int16_t *)&i2s2_rx_buffer[AUDIO_BLOCK_SAMPLES];
if (AudioInputI2S2::update_responsibility) AudioStream::update_all();
} else {
// DMA is receiving to the second half of the buffer
// need to remove data from the first half
src = (int16_t *)&i2s2_rx_buffer[0];
end = (int16_t *)&i2s2_rx_buffer[AUDIO_BLOCK_SAMPLES/2];
}
left = AudioInputI2S2::block_left;
right = AudioInputI2S2::block_right;
if (left != NULL && right != NULL) {
offset = AudioInputI2S2::block_offset;
if (offset <= AUDIO_BLOCK_SAMPLES/2) {
dest_left = &(left->data[offset]);
dest_right = &(right->data[offset]);
AudioInputI2S2::block_offset = offset + AUDIO_BLOCK_SAMPLES/2;

do {
//Serial.println(*src);
//n = *src++;
//*dest_left++ = (int16_t)n;
//*dest_right++ = (int16_t)(n >> 16);
*dest_left++ = *src++;
*dest_right++ = *src++;
} while (src < end);
}
}
//digitalWriteFast(13, LOW);
}



void AudioInputI2S2::update(void)
{
audio_block_t *new_left=NULL, *new_right=NULL, *out_left=NULL, *out_right=NULL;

// allocate 2 new blocks, but if one fails, allocate neither
new_left = allocate();
if (new_left != NULL) {
new_right = allocate();
if (new_right == NULL) {
release(new_left);
new_left = NULL;
}
}
__disable_irq();
if (block_offset >= AUDIO_BLOCK_SAMPLES) {
// the DMA filled 2 blocks, so grab them and get the
// 2 new blocks to the DMA, as quickly as possible
out_left = block_left;
block_left = new_left;
out_right = block_right;
block_right = new_right;
block_offset = 0;
__enable_irq();
// then transmit the DMA's former blocks
transmit(out_left, 0);
release(out_left);
transmit(out_right, 1);
release(out_right);
//Serial.print(".");
} else if (new_left != NULL) {
// the DMA didn't fill blocks, but we allocated blocks
if (block_left == NULL) {
// the DMA doesn't have any blocks to fill, so
// give it the ones we just allocated
block_left = new_left;
block_right = new_right;
block_offset = 0;
__enable_irq();
} else {
// the DMA already has blocks, doesn't need these
__enable_irq();
release(new_left);
release(new_right);
}
} else {
// The DMA didn't fill blocks, and we could not allocate
// memory... the system is likely starving for memory!
// Sadly, there's nothing we can do.
__enable_irq();
}
}


/******************************************************************/

#if 0
void AudioInputI2S2slave::begin(void)
{
dma.begin(true); // Allocate the DMA channel first

//block_left_1st = NULL;
//block_right_1st = NULL;

AudioOutputI2S2slave::config_i2s();

CORE_PIN33_CONFIG = 2; //2:RX_DATA0
IOMUXC_SAI2_RX_DATA0_SELECT_INPUT = 0;

dma.TCD->SADDR = (void *)((uint32_t)&I2S2_RDR0 + 2);
dma.TCD->SOFF = 0;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = 0;
dma.TCD->DADDR = i2s2_rx_buffer;
dma.TCD->DOFF = 2;
dma.TCD->CITER_ELINKNO = sizeof(i2s2_rx_buffer) / 2;
dma.TCD->DLASTSGA = -sizeof(i2s2_rx_buffer);
dma.TCD->BITER_ELINKNO = sizeof(i2s2_rx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;

dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_RX);
update_responsibility = update_setup();
dma.enable();

I2S2_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
dma.attachInterrupt(isr);

}
#endif
#endif

+ 62
- 0
input_i2s2.h Ver arquivo

@@ -0,0 +1,62 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#ifndef _input_i2s2_h_
#define _input_i2s2_h_

#include "Arduino.h"
#include "AudioStream.h"
#include "DMAChannel.h"

class AudioInputI2S2 : public AudioStream
{
public:
AudioInputI2S2(void) : AudioStream(0, NULL) { begin(); }
virtual void update(void);
void begin(void);
protected:
AudioInputI2S2(int dummy): AudioStream(0, NULL) {} // to be used only inside AudioInputI2Sslave !!
static bool update_responsibility;
static DMAChannel dma;
static void isr(void);
private:
static audio_block_t *block_left;
static audio_block_t *block_right;
static uint16_t block_offset;
};


class AudioInputI2S2slave : public AudioInputI2S2
{
public:
AudioInputI2S2slave(void) : AudioInputI2S2(0) { begin(); }
void begin(void);
friend void dma_ch1_isr(void);
};

#endif
#endif //#if defined(__IMXRT1052__) || defined(__IMXRT1062__)

+ 5
- 0
keywords.txt Ver arquivo

@@ -1,19 +1,24 @@
Audio KEYWORD2
AudioConnection KEYWORD2
AudioInputI2S KEYWORD2
AudioInputI2S2 KEYWORD2
AudioInputI2SQuad KEYWORD2
AudioInputI2Sslave KEYWORD2
AudioInputTDM KEYWORD2
AudioInputPDM KEYWORD2
AudioInputUSB KEYWORD2
AudioOutputI2S KEYWORD2
AudioOutputI2S2 KEYWORD2
AudioOutputI2SQuad KEYWORD2
AudioOutputI2Sslave KEYWORD2
AudioOutputSPDIF KEYWORD2
AudioOutputPT8211 KEYWORD2
AudioOutputPT8211_2 KEYWORD2
AudioOutputTDM KEYWORD2
AudioOutputTDM2 KEYWORD2
AudioOutputADAT KEYWORD2
AudioOutputPWM KEYWORD2
AudioOutputMQS KEYWORD2
AudioOutputUSB KEYWORD2
AudioControlSGTL5000 KEYWORD2
AudioControlWM8731 KEYWORD2

+ 2
- 46
output_i2s.cpp Ver arquivo

@@ -41,15 +41,6 @@ DMAChannel AudioOutputI2S::dma(false);
#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#include "utility/imxrt_hw.h"

//TODO: Copy these to imrtx.h:
#if !defined(I2S_TCR2_BCP)
#define I2S_TCR2_BCP ((uint32_t)1<<25)
#define I2S_RCR2_BCP ((uint32_t)1<<25)
#define I2S_TCR4_FCONT ((uint32_t)1<<28) // FIFO Continue on Error
#define I2S_RCR4_FCONT ((uint32_t)1<<28) // FIFO Continue on Error
#define I2S_TCR4_FSP ((uint32_t)1<< 1)
#define I2S_RCR4_FSP ((uint32_t)1<< 1)
#endif

void AudioOutputI2S::begin(void)
{
@@ -60,9 +51,6 @@ void AudioOutputI2S::begin(void)

config_i2s();
CORE_PIN6_CONFIG = 3; //1:TX_DATA0
#if defined(SAI2)
CORE_PIN2_CONFIG = 2; //2:TX_DATA0
#endif

dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
@@ -76,15 +64,10 @@ void AudioOutputI2S::begin(void)
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S1_TDR0 + 2);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_TX);
//I2S1_RCSR = (1<<25); //Reset
//I2S1_TCSR = (1<<25); //Reset

I2S1_RCSR |= I2S_RCSR_RE;
//I2S1_TCSR = I2S_TCSR_SR;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
#if defined(SAI2)
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);
I2S2_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE; //SAI2
#endif

update_responsibility = update_setup();
dma.attachInterrupt(isr);
dma.enable();
@@ -430,18 +413,6 @@ void AudioOutputI2S::config_i2s(void)
// CORE_PIN6_CONFIG = 3; //1:TX_DATA0
// CORE_PIN7_CONFIG = 3; //1:RX_DATA0

#if defined(SAI2)
i2s = ((I2S_STRUCT *)0x40388000);
if (i2s->TX.CSR & I2S_TCSR_TE) return;
if (i2s->RX.CSR & I2S_RCSR_RE) return;

CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC
// CORE_PIN2_CONFIG = 2; //2:TX_DATA0
// CORE_PIN33_CONFIG = 2; //2:RX_DATA0
#endif

int rsync = 0;
int tsync = 1;

@@ -463,21 +434,6 @@ void AudioOutputI2S::config_i2s(void)
I2S1_RCR4 = I2S_RCR4_FRSZ((2-1)) | I2S_RCR4_SYWD((32-1)) | I2S_RCR4_MF | I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
I2S1_RCR5 = I2S_RCR5_WNW((32-1)) | I2S_RCR5_W0W((32-1)) | I2S_RCR5_FBT((32-1));


#if defined(SAI2)
CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);

CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1) | CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0)); //Select MCLK
sai_rxConfig(32, 2, 1);
sai_txConfig(32, 2, 0);

#endif

#endif
}


+ 0
- 23
output_i2s.h Ver arquivo

@@ -31,29 +31,6 @@
#include "AudioStream.h"
#include "DMAChannel.h"

/*
typedef struct
{
uint32_t CSR;
uint32_t CR1,CR2,CR3,CR4,CR5;
union {
uint32_t DR[8];
uint16_t DR16[16];
};
uint32_t FR[8];
uint32_t MR;
} I2S_PORT;

typedef struct
{
uint32_t VERID;
uint32_t PARAM;
I2S_PORT TX;
uint32_t unused[9];
I2S_PORT RX;
} I2S_STRUCT;
*/

class AudioOutputI2S : public AudioStream
{
public:

+ 39
- 133
output_i2s2.cpp Ver arquivo

@@ -35,7 +35,7 @@ audio_block_t * AudioOutputI2S2::block_right_2nd = NULL;
uint16_t AudioOutputI2S2::block_left_offset = 0;
uint16_t AudioOutputI2S2::block_right_offset = 0;
bool AudioOutputI2S2::update_responsibility = false;
static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES];
static uint32_t i2s2_tx_buffer[AUDIO_BLOCK_SAMPLES];
DMAChannel AudioOutputI2S2::dma(false);


@@ -51,15 +51,15 @@ void AudioOutputI2S2::begin(void)
config_i2s();
CORE_PIN2_CONFIG = 2; //2:TX_DATA0

dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SADDR = i2s2_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->SLAST = -sizeof(i2s2_tx_buffer);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CITER_ELINKNO = sizeof(i2s2_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->BITER_ELINKNO = sizeof(i2s2_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S2_TDR0 + 2);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);
@@ -78,15 +78,15 @@ void AudioOutputI2S2::isr(void)

saddr = (uint32_t)(dma.TCD->SADDR);
dma.clearInterrupt();
if (saddr < (uint32_t)i2s_tx_buffer + sizeof(i2s_tx_buffer) / 2) {
if (saddr < (uint32_t)i2s2_tx_buffer + sizeof(i2s2_tx_buffer) / 2) {
// DMA is transmitting the first half of the buffer
// so we must fill the second half
dest = (int16_t *)&i2s_tx_buffer[AUDIO_BLOCK_SAMPLES/2];
dest = (int16_t *)&i2s2_tx_buffer[AUDIO_BLOCK_SAMPLES/2];
if (AudioOutputI2S2::update_responsibility) AudioStream::update_all();
} else {
// DMA is transmitting the second half of the buffer
// so we must fill the first half
dest = (int16_t *)i2s_tx_buffer;
dest = (int16_t *)i2s2_tx_buffer;
}

blockL = AudioOutputI2S2::block_left_1st;
@@ -179,7 +179,7 @@ void AudioOutputI2S2::update(void)
}

void AudioOutputI2S2::config_i2s(void)
{
{
CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT;
@@ -197,7 +197,8 @@ void AudioOutputI2S2::config_i2s(void)
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1) | CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1)
| CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0)); //Select MCLK

@@ -234,11 +235,9 @@ void AudioOutputI2S2::config_i2s(void)

}



/******************************************************************/
#if 0
void AudioOutputI2Sslave::begin(void)
void AudioOutputI2S2slave::begin(void)
{
dma.begin(true); // Allocate the DMA channel first

@@ -246,122 +245,34 @@ void AudioOutputI2Sslave::begin(void)
block_left_1st = NULL;
block_right_1st = NULL;

AudioOutputI2Sslave::config_i2s();
AudioOutputI2S2slave::config_i2s();

#if defined(KINETISK)
CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0
dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->DADDR = (void *)((uint32_t)&I2S0_TDR0 + 2);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX);
I2S0_TCSR = I2S_TCSR_SR;
I2S0_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;

#elif 0 && ( defined(__IMXRT1052__) || defined(__IMXRT1062__) )
#if defined(SAI1)
CORE_PIN6_CONFIG = 3; //1:TX_DATA0
//CORE_PIN7_CONFIG = 3; //1:RX_DATA0
#elif defined(SAI2)
CORE_PIN2_CONFIG = 2; //2:TX_DATA0
//CORE_PIN33_CONFIG = 2; //2:RX_DATA0
#endif
dma.TCD->SADDR = i2s_tx_buffer;

dma.TCD->SADDR = i2s2_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->DADDR = (void *)&i2s->TX.DR16[1];
dma.TCD->SLAST = -sizeof(i2s2_tx_buffer);
dma.TCD->DADDR = (void *)((uint32_t)&I2S2_TDR0 + 2);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CITER_ELINKNO = sizeof(i2s2_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->BITER_ELINKNO = sizeof(i2s2_tx_buffer) / 2;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);
#endif

update_responsibility = update_setup();
dma.enable();
dma.attachInterrupt(isr);
}

void AudioOutputI2Sslave::config_i2s(void)
void AudioOutputI2S2slave::config_i2s(void)
{
#if defined(KINETISK)
// if either transmitter or receiver is enabled, do nothing
if (I2S0_TCSR & I2S_TCSR_TE) return;
if (I2S0_RCSR & I2S_RCSR_RE) return;

SIM_SCGC6 |= SIM_SCGC6_I2S;
SIM_SCGC7 |= SIM_SCGC7_DMA;
SIM_SCGC6 |= SIM_SCGC6_DMAMUX;
// configure pin mux for 3 clock signals

CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK)
CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK
CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK
// Select input clock 0
// Configure to input the bit-clock from pin, bypasses the MCLK divider
I2S0_MCR = I2S_MCR_MICS(0);
I2S0_MDR = 0;

// configure transmitter
I2S0_TMR = 0;
I2S0_TCR1 = I2S_TCR1_TFW(1); // watermark at half fifo size
I2S0_TCR2 = I2S_TCR2_SYNC(0) | I2S_TCR2_BCP;

I2S0_TCR3 = I2S_TCR3_TCE;
I2S0_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(31) | I2S_TCR4_MF
| I2S_TCR4_FSE | I2S_TCR4_FSP;

I2S0_TCR5 = I2S_TCR5_WNW(31) | I2S_TCR5_W0W(31) | I2S_TCR5_FBT(31);

// configure receiver (sync'd to transmitter clocks)
I2S0_RMR = 0;
I2S0_RCR1 = I2S_RCR1_RFW(1);
I2S0_RCR2 = I2S_RCR2_SYNC(1) | I2S_TCR2_BCP;

I2S0_RCR3 = I2S_RCR3_RCE;
I2S0_RCR4 = I2S_RCR4_FRSZ(1) | I2S_RCR4_SYWD(31) | I2S_RCR4_MF
| I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;

I2S0_RCR5 = I2S_RCR5_WNW(31) | I2S_RCR5_W0W(31) | I2S_RCR5_FBT(31);

#elif 0 && (defined(__IMXRT1052__) || defined(__IMXRT1062__) )

#if defined(SAI1)
i2s = ((I2S_STRUCT *)0x40384000);
// if either transmitter or receiver is enabled, do nothing
if (i2s->TX.CSR & I2S_TCSR_TE) return;
if (i2s->RX.CSR & I2S_RCSR_RE) return;

CCM_CCGR5 |= CCM_CCGR5_SAI1(CCM_CCGR_ON);
/*
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI1_CLK_SEL_MASK))
| CCM_CSCMR1_SAI1_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4
CCM_CS1CDR = (CCM_CS1CDR & ~(CCM_CS1CDR_SAI1_CLK_PRED_MASK | CCM_CS1CDR_SAI1_CLK_PODF_MASK))
| CCM_CS1CDR_SAI1_CLK_PRED(n1-1) // &0x07
| CCM_CS1CDR_SAI1_CLK_PODF(n2-1); // &0x3f
*/
//TODO:
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL_MASK | ((uint32_t)(1<<20)) ))
| (IOMUXC_GPR_GPR1_SAI1_MCLK_DIR | IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL(0)); //Select MCLK

CORE_PIN23_CONFIG = 3; //1:MCLK
CORE_PIN21_CONFIG = 3; //1:RX_BCLK
CORE_PIN20_CONFIG = 3; //1:RX_SYNC
int rsync = 0;
int tsync = 1;
#elif defined(SAI2)
i2s = ((I2S_STRUCT *)0x40388000);
if (i2s->TX.CSR & I2S_TCSR_TE) return;
if (i2s->RX.CSR & I2S_RCSR_RE) return;
if (I2S2_TCSR & I2S_TCSR_TE) return;
if (I2S2_TCSR & I2S_RCSR_RE) return;

CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);
/*
@@ -370,10 +281,8 @@ void AudioOutputI2Sslave::config_i2s(void)
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1) | CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
*/
//TODO:

IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK | ((uint32_t)(1<<19)) ))
/*| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR*/ | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0); //Select MCLK
// IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK | ((uint32_t)(1<<19)) ))
// /*| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR*/ | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0); //Select MCLK

CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
@@ -381,27 +290,24 @@ void AudioOutputI2Sslave::config_i2s(void)
int rsync = 1;
int tsync = 0;

#endif

// configure transmitter
i2s->TX.MR = 0;
i2s->TX.CR1 = I2S_TCR1_RFW(1); // watermark at half fifo size
i2s->TX.CR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP;
i2s->TX.CR3 = I2S_TCR3_TCE;
i2s->TX.CR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(31) | I2S_TCR4_MF
I2S2_TMR = 0;
I2S2_TCR1 = I2S_TCR1_RFW(1); // watermark at half fifo size
I2S2_TCR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP;
I2S2_TCR3 = I2S_TCR3_TCE;
I2S2_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(31) | I2S_TCR4_MF
| I2S_TCR4_FSE | I2S_TCR4_FSP;
i2s->TX.CR5 = I2S_TCR5_WNW(31) | I2S_TCR5_W0W(31) | I2S_TCR5_FBT(31);
I2S2_TCR5 = I2S_TCR5_WNW(31) | I2S_TCR5_W0W(31) | I2S_TCR5_FBT(31);

// configure receiver
i2s->RX.MR = 0;
i2s->RX.CR1 = I2S_RCR1_RFW(1);
i2s->RX.CR2 = I2S_RCR2_SYNC(rsync) | I2S_TCR2_BCP;
i2s->RX.CR3 = I2S_RCR3_RCE;
i2s->RX.CR4 = I2S_RCR4_FRSZ(1) | I2S_RCR4_SYWD(31) | I2S_RCR4_MF
I2S2_TMR = 0;
I2S2_TCR1 = I2S_RCR1_RFW(1);
I2S2_TCR2 = I2S_RCR2_SYNC(rsync) | I2S_TCR2_BCP;
I2S2_TCR3 = I2S_RCR3_RCE;
I2S2_TCR4 = I2S_RCR4_FRSZ(1) | I2S_RCR4_SYWD(31) | I2S_RCR4_MF
| I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
i2s->RX.CR5 = I2S_RCR5_WNW(31) | I2S_RCR5_W0W(31) | I2S_RCR5_FBT(31);

#endif
I2S2_TCR5 = I2S_RCR5_WNW(31) | I2S_RCR5_W0W(31) | I2S_RCR5_FBT(31);
}
#endif //if 0
#endif //defined(__IMXRT1062__)
#endif
#endif //defined(__IMXRT1062__)

+ 6
- 6
output_i2s2.h Ver arquivo

@@ -39,7 +39,7 @@ public:
AudioOutputI2S2(void) : AudioStream(2, inputQueueArray) { begin(); }
virtual void update(void);
void begin(void);
friend class AudioInputI2S;
friend class AudioInputI2S2;
protected:
AudioOutputI2S2(int dummy): AudioStream(2, inputQueueArray) {} // to be used only inside AudioOutputI2Sslave !!
static void config_i2s(void);
@@ -56,18 +56,18 @@ private:
audio_block_t *inputQueueArray[2];
};

#if 0
class AudioOutputI2Sslave : public AudioOutputI2S
class AudioOutputI2S2slave : public AudioOutputI2S2
{
public:
AudioOutputI2Sslave(void) : AudioOutputI2S(0) { begin(); } ;
AudioOutputI2S2slave(void) : AudioOutputI2S2(0) { begin(); } ;
void begin(void);
friend class AudioInputI2Sslave;
friend class AudioInputI2S2slave;
friend void dma_ch0_isr(void);
protected:
static void config_i2s(void);
};
#endif

#endif
#endif //defined(__IMXRT1062__)

+ 229
- 0
output_mqs.cpp Ver arquivo

@@ -0,0 +1,229 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Frank B

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#include <Arduino.h>
#include "output_mqs.h"
#include "memcpy_audio.h"
#include "utility/imxrt_hw.h"

audio_block_t * AudioOutputMQS::block_left_1st = NULL;
audio_block_t * AudioOutputMQS::block_right_1st = NULL;
audio_block_t * AudioOutputMQS::block_left_2nd = NULL;
audio_block_t * AudioOutputMQS::block_right_2nd = NULL;
uint16_t AudioOutputMQS::block_left_offset = 0;
uint16_t AudioOutputMQS::block_right_offset = 0;
bool AudioOutputMQS::update_responsibility = false;
static uint32_t I2S3_tx_buffer[AUDIO_BLOCK_SAMPLES];
DMAChannel AudioOutputMQS::dma(false);

void AudioOutputMQS::begin(void)
{
dma.begin(true); // Allocate the DMA channel first

block_left_1st = NULL;
block_right_1st = NULL;

config_i2s();

CORE_PIN10_CONFIG = 2;//B0_00 MQS_RIGHT
CORE_PIN12_CONFIG = 2;//B0_01 MQS_LEFT

dma.TCD->SADDR = I2S3_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(I2S3_tx_buffer);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(I2S3_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(I2S3_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S3_TDR0 + 0);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI3_TX);

I2S3_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
update_responsibility = update_setup();
dma.attachInterrupt(isr);
dma.enable();
}

void AudioOutputMQS::isr(void)
{
int16_t *dest;
audio_block_t *blockL, *blockR;
uint32_t saddr, offsetL, offsetR;

saddr = (uint32_t)(dma.TCD->SADDR);
dma.clearInterrupt();
if (saddr < (uint32_t)I2S3_tx_buffer + sizeof(I2S3_tx_buffer) / 2) {
// DMA is transmitting the first half of the buffer
// so we must fill the second half
dest = (int16_t *)&I2S3_tx_buffer[AUDIO_BLOCK_SAMPLES/2];
if (AudioOutputMQS::update_responsibility) AudioStream::update_all();
} else {
// DMA is transmitting the second half of the buffer
// so we must fill the first half
dest = (int16_t *)I2S3_tx_buffer;
}

blockL = AudioOutputMQS::block_left_1st;
blockR = AudioOutputMQS::block_right_1st;
offsetL = AudioOutputMQS::block_left_offset;
offsetR = AudioOutputMQS::block_right_offset;

if (blockL && blockR) {
memcpy_tointerleaveLR(dest, blockL->data + offsetL, blockR->data + offsetR);
offsetL += AUDIO_BLOCK_SAMPLES / 2;
offsetR += AUDIO_BLOCK_SAMPLES / 2;
} else if (blockL) {
memcpy_tointerleaveL(dest, blockL->data + offsetL);
offsetL += AUDIO_BLOCK_SAMPLES / 2;
} else if (blockR) {
memcpy_tointerleaveR(dest, blockR->data + offsetR);
offsetR += AUDIO_BLOCK_SAMPLES / 2;
} else {
memset(dest,0,AUDIO_BLOCK_SAMPLES * 2);
return;
}

if (offsetL < AUDIO_BLOCK_SAMPLES) {
AudioOutputMQS::block_left_offset = offsetL;
} else {
AudioOutputMQS::block_left_offset = 0;
AudioStream::release(blockL);
AudioOutputMQS::block_left_1st = AudioOutputMQS::block_left_2nd;
AudioOutputMQS::block_left_2nd = NULL;
}
if (offsetR < AUDIO_BLOCK_SAMPLES) {
AudioOutputMQS::block_right_offset = offsetR;
} else {
AudioOutputMQS::block_right_offset = 0;
AudioStream::release(blockR);
AudioOutputMQS::block_right_1st = AudioOutputMQS::block_right_2nd;
AudioOutputMQS::block_right_2nd = NULL;
}

}




void AudioOutputMQS::update(void)
{
// null audio device: discard all incoming data
//if (!active) return;
//audio_block_t *block = receiveReadOnly();
//if (block) release(block);
//digitalWriteFast(13, LOW);
audio_block_t *block;
block = receiveReadOnly(0); // input 0 = left channel
if (block) {
__disable_irq();
if (block_left_1st == NULL) {
block_left_1st = block;
block_left_offset = 0;
__enable_irq();
} else if (block_left_2nd == NULL) {
block_left_2nd = block;
__enable_irq();
} else {
audio_block_t *tmp = block_left_1st;
block_left_1st = block_left_2nd;
block_left_2nd = block;
block_left_offset = 0;
__enable_irq();
release(tmp);
}
}
block = receiveReadOnly(1); // input 1 = right channel
if (block) {
__disable_irq();
if (block_right_1st == NULL) {
block_right_1st = block;
block_right_offset = 0;
__enable_irq();
} else if (block_right_2nd == NULL) {
block_right_2nd = block;
__enable_irq();
} else {
audio_block_t *tmp = block_right_1st;
block_right_1st = block_right_2nd;
block_right_2nd = block;
block_right_offset = 0;
__enable_irq();
release(tmp);
}
}

}

void AudioOutputMQS::config_i2s(void)
{
CCM_CCGR5 |= CCM_CCGR5_SAI3(CCM_CCGR_ON);
CCM_CCGR0 |= CCM_CCGR0_MQS_HMCLK(CCM_CCGR_ON);

//PLL:
//TODO: Check if frequencies are correct!

int fs = AUDIO_SAMPLE_RATE_EXACT;
int oversample = 64*8;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
int n2 = 1 + (24000000 * 27) / (fs * oversample * n1);

double C = ((double)fs * oversample * n1 * n2) / 24000000;
int c0 = C;
int c2 = 10000;
int c1 = C * c2 - (c0 * c2);

set_audioClock(c0, c1, c2);

CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI3_CLK_SEL_MASK))
| CCM_CSCMR1_SAI3_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS1CDR = (CCM_CS1CDR & ~(CCM_CS1CDR_SAI3_CLK_PRED_MASK | CCM_CS1CDR_SAI3_CLK_PODF_MASK))
| CCM_CS1CDR_SAI3_CLK_PRED(n1-1)
| CCM_CS1CDR_SAI3_CLK_PODF(n2-1);
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI3_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI3_MCLK_DIR | IOMUXC_GPR_GPR1_SAI3_MCLK3_SEL(0)); //Select MCLK

IOMUXC_GPR_GPR2 = (IOMUXC_GPR_GPR2 & ~(IOMUXC_GPR_GPR2_MQS_OVERSAMPLE | IOMUXC_GPR_GPR2_MQS_CLK_DIV_MASK))
| IOMUXC_GPR_GPR2_MQS_EN | IOMUXC_GPR_GPR2_MQS_OVERSAMPLE | IOMUXC_GPR_GPR2_MQS_CLK_DIV(0);

if (I2S3_TCSR & I2S_TCSR_TE) return;

I2S3_TMR = 0;
// I2S3_TCSR = (1<<25); //Reset
I2S3_TCR1 = I2S_TCR1_RFW(1);
I2S3_TCR2 = I2S_TCR2_SYNC(0) /*| I2S_TCR2_BCP*/ // sync=0; tx is async;
| (I2S_TCR2_BCD | I2S_TCR2_DIV((7)) | I2S_TCR2_MSEL(1));
I2S3_TCR3 = I2S_TCR3_TCE;
I2S3_TCR4 = I2S_TCR4_FRSZ((2-1)) | I2S_TCR4_SYWD((16-1)) | I2S_TCR4_MF | I2S_TCR4_FSD /*| I2S_TCR4_FSE*/ /* | I2S_TCR4_FSP */;
I2S3_TCR5 = I2S_TCR5_WNW((16-1)) | I2S_TCR5_W0W((16-1)) | I2S_TCR5_FBT((16-1));
}

#endif //defined(__IMXRT1062__)

+ 58
- 0
output_mqs.h Ver arquivo

@@ -0,0 +1,58 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#ifndef output_mqs_h_
#define output_mqs_h_

#include "Arduino.h"
#include "AudioStream.h"
#include "DMAChannel.h"

class AudioOutputMQS : public AudioStream
{
public:
AudioOutputMQS(void) : AudioStream(2, inputQueueArray) { begin(); }
virtual void update(void);
void begin(void);
friend class AudioInputI2S2;
protected:
static void config_i2s(void);
static audio_block_t *block_left_1st;
static audio_block_t *block_right_1st;
static bool update_responsibility;
static DMAChannel dma;
static void isr(void);
private:
static audio_block_t *block_left_2nd;
static audio_block_t *block_right_2nd;
static uint16_t block_left_offset;
static uint16_t block_right_offset;
audio_block_t *inputQueueArray[2];
};

#endif
#endif //defined(__IMXRT1062__)

+ 103
- 24
output_pt8211.cpp Ver arquivo

@@ -26,11 +26,11 @@

//Adapted to PT8211, Frank Bösing, Ben-Rheinland

#if !defined(__IMXRT1052__) && !defined(__IMXRT1062__)

#include <Arduino.h>
#include "output_pt8211.h"
#include "memcpy_audio.h"
#include "utility/imxrt_hw.h"

audio_block_t * AudioOutputPT8211::block_left_1st = NULL;
audio_block_t * AudioOutputPT8211::block_right_1st = NULL;
@@ -40,9 +40,9 @@ uint16_t AudioOutputPT8211::block_left_offset = 0;
uint16_t AudioOutputPT8211::block_right_offset = 0;
bool AudioOutputPT8211::update_responsibility = false;
#if defined(AUDIO_PT8211_OVERSAMPLING)
DMAMEM static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES*4];
static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES*4];
#else
DMAMEM static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES];
static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES];
#endif
DMAChannel AudioOutputPT8211::dma(false);

@@ -55,9 +55,9 @@ void AudioOutputPT8211::begin(void)

// TODO: should we set & clear the I2S_TCSR_SR bit here?
config_i2s();
#if defined(KINETISK)
CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0

#if defined(KINETISK)
dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
@@ -69,13 +69,33 @@ void AudioOutputPT8211::begin(void)
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
#endif
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX);
update_responsibility = update_setup();
dma.enable();

dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX);
I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE | I2S_TCSR_FR;

#elif defined(__IMXRT1052__) || defined(__IMXRT1062__)

CORE_PIN6_CONFIG = 3; //1:TX_DATA0

dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S1_TDR0);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_TX);

I2S1_RCSR |= I2S_RCSR_RE;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
#endif
update_responsibility = update_setup();
dma.attachInterrupt(isr);
dma.enable();
}

void AudioOutputPT8211::isr(void)
@@ -105,7 +125,7 @@ void AudioOutputPT8211::isr(void)
blockR = AudioOutputPT8211::block_right_1st;
offsetL = AudioOutputPT8211::block_left_offset;
offsetR = AudioOutputPT8211::block_right_offset;
#if defined(AUDIO_PT8211_OVERSAMPLING)
static int32_t oldL = 0;
static int32_t oldR = 0;
@@ -134,12 +154,12 @@ void AudioOutputPT8211::isr(void)
for (int i=0; i< AUDIO_BLOCK_SAMPLES / 2; i++, offsetL++, offsetR++) {
int32_t valL = blockL->data[offsetL];
int32_t valR = blockR->data[offsetR];
int32_t combL[3] = {0};
static int32_t combLOld[2] = {0};
int32_t combR[3] = {0};
static int32_t combROld[2] = {0};
combL[0] = valL - oldL;
combR[0] = valR - oldR;
combL[1] = combL[0] - combLOld[0];
@@ -186,7 +206,7 @@ void AudioOutputPT8211::isr(void)
offsetL += AUDIO_BLOCK_SAMPLES / 2;
offsetR += AUDIO_BLOCK_SAMPLES / 2;
#endif //defined(AUDIO_PT8211_OVERSAMPLING)
} else if (blockL) {
#if defined(AUDIO_PT8211_OVERSAMPLING)
#if defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
@@ -210,14 +230,14 @@ void AudioOutputPT8211::isr(void)

int32_t combL[3] = {0};
static int32_t combLOld[2] = {0};
combL[0] = valL - oldL;
combL[1] = combL[0] - combLOld[0];
combL[2] = combL[1] - combLOld[1];
// combL[2] now holds input val
combLOld[0] = combL[0];
combLOld[1] = combL[1];
for (int j = 0; j < 4; j++) {
int32_t integrateL[3];
static int32_t integrateLOld[3] = {0};
@@ -230,7 +250,7 @@ void AudioOutputPT8211::isr(void)
integrateLOld[1] = integrateL[1];
integrateLOld[2] = integrateL[2];
}
// fill right channel with zeros:
*(dest+1) = 0;
*(dest+3) = 0;
@@ -242,7 +262,7 @@ void AudioOutputPT8211::isr(void)
#else
#error no interpolation method defined for oversampling.
#endif //defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
#else
#else
memcpy_tointerleaveL(dest, blockL->data + offsetL);
offsetL += (AUDIO_BLOCK_SAMPLES / 2);
#endif //defined(AUDIO_PT8211_OVERSAMPLING)
@@ -269,14 +289,14 @@ void AudioOutputPT8211::isr(void)

int32_t combR[3] = {0};
static int32_t combROld[2] = {0};
combR[0] = valR - oldR;
combR[1] = combR[0] - combROld[0];
combR[2] = combR[1] - combROld[1];
// combR[2] now holds input val
combROld[0] = combR[0];
combROld[1] = combR[1];
for (int j = 0; j < 4; j++) {
int32_t integrateR[3];
static int32_t integrateROld[3] = {0};
@@ -289,7 +309,7 @@ void AudioOutputPT8211::isr(void)
integrateROld[1] = integrateR[1];
integrateROld[2] = integrateR[2];
}
// fill left channel with zeros:
*(dest+0) = 0;
*(dest+2) = 0;
@@ -309,7 +329,7 @@ void AudioOutputPT8211::isr(void)
#if defined(AUDIO_PT8211_OVERSAMPLING)
memset(dest,0,AUDIO_BLOCK_SAMPLES*8);
#else
memset(dest,0,AUDIO_BLOCK_SAMPLES*2);
memset(dest,0,AUDIO_BLOCK_SAMPLES*2);
#endif
return;
}
@@ -378,7 +398,7 @@ void AudioOutputPT8211::update(void)
}
}

#if defined(KINETISK)
// MCLK needs to be 48e6 / 1088 * 256 = 11.29411765 MHz -> 44.117647 kHz sample rate
//
#if F_CPU == 96000000 || F_CPU == 48000000 || F_CPU == 24000000
@@ -425,9 +445,11 @@ void AudioOutputPT8211::update(void)
#define MCLK_SRC 0 // system clock
#endif
#endif
#endif

void AudioOutputPT8211::config_i2s(void)
{
#if defined(KINETISK)
SIM_SCGC6 |= SIM_SCGC6_I2S;
SIM_SCGC7 |= SIM_SCGC7_DMA;
SIM_SCGC6 |= SIM_SCGC6_DMAMUX;
@@ -457,8 +479,65 @@ void AudioOutputPT8211::config_i2s(void)
// configure pin mux for 3 clock signals
CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK)
CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK
#if 0
CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK
//CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK
#elif ( defined(__IMXRT1052__) || defined(__IMXRT1062__) )

CCM_CCGR5 |= CCM_CCGR5_SAI1(CCM_CCGR_ON);
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
int n2 = 1 + (24000000 * 27) / (fs * 256 * n1);

double C = ((double)fs * 256 * n1 * n2) / 24000000;
int c0 = C;
int c2 = 10000;
int c1 = C * c2 - (c0 * c2);
set_audioClock(c0, c1, c2);

// clear SAI1_CLK register locations
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI1_CLK_SEL_MASK))
| CCM_CSCMR1_SAI1_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4
CCM_CS1CDR = (CCM_CS1CDR & ~(CCM_CS1CDR_SAI1_CLK_PRED_MASK | CCM_CS1CDR_SAI1_CLK_PODF_MASK))
| CCM_CS1CDR_SAI1_CLK_PRED(n1-1) // &0x07
| CCM_CS1CDR_SAI1_CLK_PODF(n2-1); // &0x3f

IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI1_MCLK_DIR | IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL(0)); //Select MCLK

if (I2S1_TCSR & I2S_TCSR_TE) return;

// CORE_PIN23_CONFIG = 3; //1:MCLK
CORE_PIN21_CONFIG = 3; //1:RX_BCLK
CORE_PIN20_CONFIG = 3; //1:RX_SYNC
// CORE_PIN6_CONFIG = 3; //1:TX_DATA0
// CORE_PIN7_CONFIG = 3; //1:RX_DATA0

int rsync = 0;
int tsync = 1;
#if defined(AUDIO_PT8211_OVERSAMPLING)
int div = 0;
#else
int div = 3;
#endif
// configure transmitter
I2S1_TMR = 0;
I2S1_TCR1 = I2S_TCR1_RFW(0);
I2S1_TCR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP | I2S_TCR2_MSEL(1) | I2S_TCR2_BCD | I2S_TCR2_DIV(div);
I2S1_TCR3 = I2S_TCR3_TCE;
// I2S1_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(15) | I2S_TCR4_MF | I2S_TCR4_FSE | I2S_TCR4_FSP | I2S_TCR4_FSD; //TDA1543
I2S1_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(15) | I2S_TCR4_MF /*| I2S_TCR4_FSE*/ | I2S_TCR4_FSP | I2S_TCR4_FSD; //PT8211
I2S1_TCR5 = I2S_TCR5_WNW(15) | I2S_TCR5_W0W(15) | I2S_TCR5_FBT(15);

I2S1_RMR = 0;
//I2S1_RCSR = (1<<25); //Reset
I2S1_RCR1 = I2S_RCR1_RFW(0);
I2S1_RCR2 = I2S_RCR2_SYNC(rsync) | I2S_RCR2_BCP | I2S_RCR2_MSEL(1) | I2S_TCR2_BCD | I2S_TCR2_DIV(div);
I2S1_RCR3 = I2S_RCR3_RCE;
// I2S1_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(15) | I2S_TCR4_MF | I2S_TCR4_FSE | I2S_TCR4_FSP | I2S_TCR4_FSD; //TDA1543
I2S1_RCR4 = I2S_RCR4_FRSZ(1) | I2S_RCR4_SYWD(15) | I2S_RCR4_MF /*| I2S_RCR4_FSE*/ | I2S_RCR4_FSP | I2S_RCR4_FSD; //PT8211
I2S1_RCR5 = I2S_RCR5_WNW(15) | I2S_RCR5_W0W(15) | I2S_RCR5_FBT(15);

#endif
}
#endif

+ 0
- 2
output_pt8211.h Ver arquivo

@@ -45,9 +45,7 @@ public:
AudioOutputPT8211(void) : AudioStream(2, inputQueueArray) { begin(); }
virtual void update(void);
void begin(void);
//friend class AudioInputI2S;
protected:
//AudioOutputI2S(int dummy): AudioStream(2, inputQueueArray) {} // to be used only inside AudioOutputI2Sslave !!
static void config_i2s(void);
static audio_block_t *block_left_1st;
static audio_block_t *block_right_1st;

+ 427
- 0
output_pt8211_2.cpp Ver arquivo

@@ -0,0 +1,427 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2016, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/

//Adapted to PT8211, Frank Bösing, Ben-Rheinland

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#include <Arduino.h>
#include "output_pt8211_2.h"
#include "memcpy_audio.h"
#include "utility/imxrt_hw.h"

audio_block_t * AudioOutputPT8211_2::block_left_1st = NULL;
audio_block_t * AudioOutputPT8211_2::block_right_1st = NULL;
audio_block_t * AudioOutputPT8211_2::block_left_2nd = NULL;
audio_block_t * AudioOutputPT8211_2::block_right_2nd = NULL;
uint16_t AudioOutputPT8211_2::block_left_offset = 0;
uint16_t AudioOutputPT8211_2::block_right_offset = 0;
bool AudioOutputPT8211_2::update_responsibility = false;
#if defined(AUDIO_PT8211_OVERSAMPLING)
static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES*4];
#else
static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES];
#endif
DMAChannel AudioOutputPT8211_2::dma(false);

PROGMEM
void AudioOutputPT8211_2::begin(void)
{
dma.begin(true); // Allocate the DMA channel first

block_left_1st = NULL;
block_right_1st = NULL;

// TODO: should we set & clear the I2S_TCSR_SR bit here?
config_i2s();
CORE_PIN2_CONFIG = 2; //2:TX_DATA0
dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S2_TDR0);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);

I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;

update_responsibility = update_setup();
dma.attachInterrupt(isr);
dma.enable();
}

void AudioOutputPT8211_2::isr(void)
{
int16_t *dest;
audio_block_t *blockL, *blockR;
uint32_t saddr, offsetL, offsetR;

saddr = (uint32_t)(dma.TCD->SADDR);
dma.clearInterrupt();
if (saddr < (uint32_t)i2s_tx_buffer + sizeof(i2s_tx_buffer) / 2) {
// DMA is transmitting the first half of the buffer
// so we must fill the second half
#if defined(AUDIO_PT8211_OVERSAMPLING)
dest = (int16_t *)&i2s_tx_buffer[(AUDIO_BLOCK_SAMPLES/2)*4];
#else
dest = (int16_t *)&i2s_tx_buffer[AUDIO_BLOCK_SAMPLES/2];
#endif
if (AudioOutputPT8211_2::update_responsibility) AudioStream::update_all();
} else {
// DMA is transmitting the second half of the buffer
// so we must fill the first half
dest = (int16_t *)i2s_tx_buffer;
}

blockL = AudioOutputPT8211_2::block_left_1st;
blockR = AudioOutputPT8211_2::block_right_1st;
offsetL = AudioOutputPT8211_2::block_left_offset;
offsetR = AudioOutputPT8211_2::block_right_offset;

#if defined(AUDIO_PT8211_OVERSAMPLING)
static int32_t oldL = 0;
static int32_t oldR = 0;
#endif
if (blockL && blockR) {
#if defined(AUDIO_PT8211_OVERSAMPLING)
#if defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
for (int i=0; i< AUDIO_BLOCK_SAMPLES / 2; i++, offsetL++, offsetR++) {
int32_t valL = blockL->data[offsetL];
int32_t valR = blockR->data[offsetR];
int32_t nL = (oldL+valL) >> 1;
int32_t nR = (oldR+valR) >> 1;
*(dest+0) = (oldL+nL) >> 1;
*(dest+1) = (oldR+nR) >> 1;
*(dest+2) = nL;
*(dest+3) = nR;
*(dest+4) = (nL+valL) >> 1;
*(dest+5) = (nR+valR) >> 1;
*(dest+6) = valL;
*(dest+7) = valR;
dest+=8;
oldL = valL;
oldR = valR;
}
#elif defined(AUDIO_PT8211_INTERPOLATION_CIC)
for (int i=0; i< AUDIO_BLOCK_SAMPLES / 2; i++, offsetL++, offsetR++) {
int32_t valL = blockL->data[offsetL];
int32_t valR = blockR->data[offsetR];

int32_t combL[3] = {0};
static int32_t combLOld[2] = {0};
int32_t combR[3] = {0};
static int32_t combROld[2] = {0};

combL[0] = valL - oldL;
combR[0] = valR - oldR;
combL[1] = combL[0] - combLOld[0];
combR[1] = combR[0] - combROld[0];
combL[2] = combL[1] - combLOld[1];
combR[2] = combR[1] - combROld[1];
// combL[2] now holds input val
// combR[2] now holds input val
oldL = valL;
oldR = valR;
combLOld[0] = combL[0];
combROld[0] = combR[0];
combLOld[1] = combL[1];
combROld[1] = combR[1];
for (int j = 0; j < 4; j++) {
int32_t integrateL[3];
int32_t integrateR[3];
static int32_t integrateLOld[3] = {0};
static int32_t integrateROld[3] = {0};
integrateL[0] = ( (j==0) ? (combL[2]) : (0) ) + integrateLOld[0];
integrateR[0] = ( (j==0) ? (combR[2]) : (0) ) + integrateROld[0];
integrateL[1] = integrateL[0] + integrateLOld[1];
integrateR[1] = integrateR[0] + integrateROld[1];
integrateL[2] = integrateL[1] + integrateLOld[2];
integrateR[2] = integrateR[1] + integrateROld[2];
// integrateL[2] now holds j'th upsampled value
// integrateR[2] now holds j'th upsampled value
*(dest+j*2) = integrateL[2] >> 4;
*(dest+j*2+1) = integrateR[2] >> 4;
integrateLOld[0] = integrateL[0];
integrateROld[0] = integrateR[0];
integrateLOld[1] = integrateL[1];
integrateROld[1] = integrateR[1];
integrateLOld[2] = integrateL[2];
integrateROld[2] = integrateR[2];
}
dest+=8;
}
#else
#error no interpolation method defined for oversampling.
#endif //defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
#else
memcpy_tointerleaveLR(dest, blockL->data + offsetL, blockR->data + offsetR);
offsetL += AUDIO_BLOCK_SAMPLES / 2;
offsetR += AUDIO_BLOCK_SAMPLES / 2;
#endif //defined(AUDIO_PT8211_OVERSAMPLING)

} else if (blockL) {
#if defined(AUDIO_PT8211_OVERSAMPLING)
#if defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
for (int i=0; i< AUDIO_BLOCK_SAMPLES / 2; i++, offsetL++) {
int32_t val = blockL->data[offsetL];
int32_t n = (oldL+val) >> 1;
*(dest+0) = (oldL+n) >> 1;
*(dest+1) = 0;
*(dest+2) = n;
*(dest+3) = 0;
*(dest+4) = (n+val) >> 1;
*(dest+5) = 0;
*(dest+6) = val;
*(dest+7) = 0;
dest+=8;
oldL = val;
}
#elif defined(AUDIO_PT8211_INTERPOLATION_CIC)
for (int i=0; i< AUDIO_BLOCK_SAMPLES / 2; i++, offsetL++, offsetR++) {
int32_t valL = blockL->data[offsetL];

int32_t combL[3] = {0};
static int32_t combLOld[2] = {0};

combL[0] = valL - oldL;
combL[1] = combL[0] - combLOld[0];
combL[2] = combL[1] - combLOld[1];
// combL[2] now holds input val
combLOld[0] = combL[0];
combLOld[1] = combL[1];

for (int j = 0; j < 4; j++) {
int32_t integrateL[3];
static int32_t integrateLOld[3] = {0};
integrateL[0] = ( (j==0) ? (combL[2]) : (0) ) + integrateLOld[0];
integrateL[1] = integrateL[0] + integrateLOld[1];
integrateL[2] = integrateL[1] + integrateLOld[2];
// integrateL[2] now holds j'th upsampled value
*(dest+j*2) = integrateL[2] >> 4;
integrateLOld[0] = integrateL[0];
integrateLOld[1] = integrateL[1];
integrateLOld[2] = integrateL[2];
}

// fill right channel with zeros:
*(dest+1) = 0;
*(dest+3) = 0;
*(dest+5) = 0;
*(dest+7) = 0;
dest+=8;
oldL = valL;
}
#else
#error no interpolation method defined for oversampling.
#endif //defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
#else
memcpy_tointerleaveL(dest, blockL->data + offsetL);
offsetL += (AUDIO_BLOCK_SAMPLES / 2);
#endif //defined(AUDIO_PT8211_OVERSAMPLING)
} else if (blockR) {
#if defined(AUDIO_PT8211_OVERSAMPLING)
#if defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
for (int i=0; i< AUDIO_BLOCK_SAMPLES / 2; i++, offsetR++) {
int32_t val = blockR->data[offsetR];
int32_t n = (oldR+val) >> 1;
*(dest+0) = 0;
*(dest+1) = ((oldR+n) >> 1);
*(dest+2) = 0;
*(dest+3) = n;
*(dest+4) = 0;
*(dest+5) = ((n+val) >> 1);
*(dest+6) = 0;
*(dest+7) = val;
dest+=8;
oldR = val;
}
#elif defined(AUDIO_PT8211_INTERPOLATION_CIC)
for (int i=0; i< AUDIO_BLOCK_SAMPLES / 2; i++, offsetL++, offsetR++) {
int32_t valR = blockR->data[offsetR];

int32_t combR[3] = {0};
static int32_t combROld[2] = {0};

combR[0] = valR - oldR;
combR[1] = combR[0] - combROld[0];
combR[2] = combR[1] - combROld[1];
// combR[2] now holds input val
combROld[0] = combR[0];
combROld[1] = combR[1];

for (int j = 0; j < 4; j++) {
int32_t integrateR[3];
static int32_t integrateROld[3] = {0};
integrateR[0] = ( (j==0) ? (combR[2]) : (0) ) + integrateROld[0];
integrateR[1] = integrateR[0] + integrateROld[1];
integrateR[2] = integrateR[1] + integrateROld[2];
// integrateR[2] now holds j'th upsampled value
*(dest+j*2+1) = integrateR[2] >> 4;
integrateROld[0] = integrateR[0];
integrateROld[1] = integrateR[1];
integrateROld[2] = integrateR[2];
}

// fill left channel with zeros:
*(dest+0) = 0;
*(dest+2) = 0;
*(dest+4) = 0;
*(dest+6) = 0;
dest+=8;
oldR = valR;
}
#else
#error no interpolation method defined for oversampling.
#endif //defined(AUDIO_PT8211_INTERPOLATION_LINEAR)
#else
memcpy_tointerleaveR(dest, blockR->data + offsetR);
offsetR += AUDIO_BLOCK_SAMPLES / 2;
#endif //defined(AUDIO_PT8211_OVERSAMPLING)
} else {
#if defined(AUDIO_PT8211_OVERSAMPLING)
memset(dest,0,AUDIO_BLOCK_SAMPLES*8);
#else
memset(dest,0,AUDIO_BLOCK_SAMPLES*2);
#endif
return;
}

if (offsetL < AUDIO_BLOCK_SAMPLES) {
AudioOutputPT8211_2::block_left_offset = offsetL;
} else {
AudioOutputPT8211_2::block_left_offset = 0;
AudioStream::release(blockL);
AudioOutputPT8211_2::block_left_1st = AudioOutputPT8211_2::block_left_2nd;
AudioOutputPT8211_2::block_left_2nd = NULL;
}
if (offsetR < AUDIO_BLOCK_SAMPLES) {
AudioOutputPT8211_2::block_right_offset = offsetR;
} else {
AudioOutputPT8211_2::block_right_offset = 0;
AudioStream::release(blockR);
AudioOutputPT8211_2::block_right_1st = AudioOutputPT8211_2::block_right_2nd;
AudioOutputPT8211_2::block_right_2nd = NULL;
}
}



void AudioOutputPT8211_2::update(void)
{

audio_block_t *block;
block = receiveReadOnly(0); // input 0 = left channel
if (block) {
__disable_irq();
if (block_left_1st == NULL) {
block_left_1st = block;
block_left_offset = 0;
__enable_irq();
} else if (block_left_2nd == NULL) {
block_left_2nd = block;
__enable_irq();
} else {
audio_block_t *tmp = block_left_1st;
block_left_1st = block_left_2nd;
block_left_2nd = block;
block_left_offset = 0;
__enable_irq();
release(tmp);
}
}
block = receiveReadOnly(1); // input 1 = right channel
if (block) {
__disable_irq();
if (block_right_1st == NULL) {
block_right_1st = block;
block_right_offset = 0;
__enable_irq();
} else if (block_right_2nd == NULL) {
block_right_2nd = block;
__enable_irq();
} else {
audio_block_t *tmp = block_right_1st;
block_right_1st = block_right_2nd;
block_right_2nd = block;
block_right_offset = 0;
__enable_irq();
release(tmp);
}
}
}

PROGMEM
void AudioOutputPT8211_2::config_i2s(void)
{

CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
int n2 = 1 + (24000000 * 27) / (fs * 256 * n1);

double C = ((double)fs * 256 * n1 * n2) / 24000000;
int c0 = C;
int c2 = 10000;
int c1 = C * c2 - (c0 * c2);
set_audioClock(c0, c1, c2);

CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1)
| CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0)); //Select MCLK

if (I2S2_TCSR & I2S_TCSR_TE) return;

//CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC

#if defined(AUDIO_PT8211_OVERSAMPLING)
int div = 0;
#else
int div = 3;
#endif
// configure transmitter
I2S2_TMR = 0;
I2S2_TCR1 = I2S_TCR1_RFW(0);
I2S2_TCR2 = I2S_TCR2_SYNC(0) | I2S_TCR2_BCP | I2S_TCR2_MSEL(1) | I2S_TCR2_BCD | I2S_TCR2_DIV(div);
I2S2_TCR3 = I2S_TCR3_TCE;
// I2S2_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(15) | I2S_TCR4_MF | I2S_TCR4_FSE | I2S_TCR4_FSP | I2S_TCR4_FSD; //TDA1543
I2S2_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(15) | I2S_TCR4_MF /*| I2S_TCR4_FSE*/ | I2S_TCR4_FSP | I2S_TCR4_FSD; //PT8211
I2S2_TCR5 = I2S_TCR5_WNW(15) | I2S_TCR5_W0W(15) | I2S_TCR5_FBT(15);

}
#endif

+ 67
- 0
output_pt8211_2.h Ver arquivo

@@ -0,0 +1,67 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2016, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/

//Frank Bösing, Ben-Rheinland

#ifndef output_pt8211_2_h_
#define output_pt8211_2_h_

//uncomment to enable oversampling:
#define AUDIO_PT8211_OVERSAMPLING
//uncomment ONE of these to define interpolation type for oversampling:
// #define AUDIO_PT8211_INTERPOLATION_LINEAR
#define AUDIO_PT8211_INTERPOLATION_CIC

#include "Arduino.h"
#include "AudioStream.h"
#include "DMAChannel.h"

class AudioOutputPT8211_2 : public AudioStream
{
public:
AudioOutputPT8211_2(void) : AudioStream(2, inputQueueArray) { begin(); }
virtual void update(void);
void begin(void);
protected:
static void config_i2s(void);
static audio_block_t *block_left_1st;
static audio_block_t *block_right_1st;
static bool update_responsibility;
static DMAChannel dma;
static void isr(void)
#if defined(AUDIO_PT8211_OVERSAMPLING)
__attribute__((optimize("unroll-loops")))
#endif
;
private:
static audio_block_t *block_left_2nd;
static audio_block_t *block_right_2nd;
static uint16_t block_left_offset;
static uint16_t block_right_offset;
audio_block_t *inputQueueArray[2];
};

#endif

+ 96
- 5
output_tdm.cpp Ver arquivo

@@ -27,7 +27,16 @@
#include <Arduino.h>
#include "output_tdm.h"
#include "memcpy_audio.h"
#if defined(KINETISK)
#include "utility/imxrt_hw.h"

#if !defined(I2S_TCR2_BCP)
#define I2S_TCR2_BCP ((uint32_t)1<<25)
#define I2S_RCR2_BCP ((uint32_t)1<<25)
#define I2S_TCR4_FCONT ((uint32_t)1<<28) // FIFO Continue on Error
#define I2S_RCR4_FCONT ((uint32_t)1<<28) // FIFO Continue on Error
#define I2S_TCR4_FSP ((uint32_t)1<< 1)
#define I2S_RCR4_FSP ((uint32_t)1<< 1)
#endif

audio_block_t * AudioOutputTDM::block_input[16] = {
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
@@ -35,7 +44,7 @@ audio_block_t * AudioOutputTDM::block_input[16] = {
};
bool AudioOutputTDM::update_responsibility = false;
static uint32_t zeros[AUDIO_BLOCK_SAMPLES/2];
DMAMEM static uint32_t tdm_tx_buffer[AUDIO_BLOCK_SAMPLES*16];
static uint32_t tdm_tx_buffer[AUDIO_BLOCK_SAMPLES*16];
DMAChannel AudioOutputTDM::dma(false);

void AudioOutputTDM::begin(void)
@@ -48,6 +57,7 @@ void AudioOutputTDM::begin(void)

// TODO: should we set & clear the I2S_TCSR_SR bit here?
config_tdm();
#if defined(KINETISK)
CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0

dma.TCD->SADDR = tdm_tx_buffer;
@@ -62,11 +72,35 @@ void AudioOutputTDM::begin(void)
dma.TCD->BITER_ELINKNO = sizeof(tdm_tx_buffer) / 4;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX);

update_responsibility = update_setup();
dma.enable();

I2S0_TCSR = I2S_TCSR_SR;
I2S0_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
#elif defined(__IMXRT1052__) || defined(__IMXRT1062__)
CORE_PIN6_CONFIG = 3; //1:TX_DATA0

dma.TCD->SADDR = tdm_tx_buffer;
dma.TCD->SOFF = 4;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(2) | DMA_TCD_ATTR_DSIZE(2);
dma.TCD->NBYTES_MLNO = 4;
dma.TCD->SLAST = -sizeof(tdm_tx_buffer);
dma.TCD->DADDR = &I2S1_TDR0;
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(tdm_tx_buffer) / 4;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(tdm_tx_buffer) / 4;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_TX);

update_responsibility = update_setup();
dma.enable();

I2S1_RCSR |= I2S_RCSR_RE;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;

#endif
dma.attachInterrupt(isr);
}

@@ -135,7 +169,7 @@ void AudioOutputTDM::update(void)
}
}

#if defined(KINETISK)
// MCLK needs to be 48e6 / 1088 * 512 = 22.588235 MHz -> 44.117647 kHz sample rate
//
#if F_CPU == 96000000 || F_CPU == 48000000 || F_CPU == 24000000
@@ -179,9 +213,11 @@ void AudioOutputTDM::update(void)
#define MCLK_SRC 0 // system clock
#endif
#endif
#endif

void AudioOutputTDM::config_tdm(void)
{
#if defined(KINETISK)
SIM_SCGC6 |= SIM_SCGC6_I2S;
SIM_SCGC7 |= SIM_SCGC7_DMA;
SIM_SCGC6 |= SIM_SCGC6_DMAMUX;
@@ -219,8 +255,63 @@ void AudioOutputTDM::config_tdm(void)
CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK)
CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK
CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK
}

#elif defined(__IMXRT1052__) || defined(__IMXRT1062__)
CCM_CCGR5 |= CCM_CCGR5_SAI1(CCM_CCGR_ON);
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT*2;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
int n2 = 1 + (24000000 * 27) / (fs * 256 * n1);

double C = ((double)fs * 256 * n1 * n2) / 24000000;
int c0 = C;
int c2 = 10000;
int c1 = C * c2 - (c0 * c2);
set_audioClock(c0, c1, c2);
// clear SAI1_CLK register locations
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI1_CLK_SEL_MASK))
| CCM_CSCMR1_SAI1_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4

//n1 = n1 / 2; //Double Speed for TDM

CCM_CS1CDR = (CCM_CS1CDR & ~(CCM_CS1CDR_SAI1_CLK_PRED_MASK | CCM_CS1CDR_SAI1_CLK_PODF_MASK))
| CCM_CS1CDR_SAI1_CLK_PRED(n1-1) // &0x07
| CCM_CS1CDR_SAI1_CLK_PODF(n2-1); // &0x3f

IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI1_MCLK_DIR | IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL(0)); //Select MCLK

// if either transmitter or receiver is enabled, do nothing
if (I2S1_TCSR & I2S_TCSR_TE) return;
if (I2S1_RCSR & I2S_RCSR_RE) return;

// configure transmitter
int rsync = 0;
int tsync = 1;

I2S1_TMR = 0;
I2S1_TCR1 = I2S_TCR1_RFW(4);
I2S1_TCR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP | I2S_TCR2_MSEL(1)
| I2S_TCR2_BCD | I2S_TCR2_DIV(0);
I2S1_TCR3 = I2S_TCR3_TCE;
I2S1_TCR4 = I2S_TCR4_FRSZ(7) | I2S_TCR4_SYWD(0) | I2S_TCR4_MF
| I2S_TCR4_FSE | I2S_TCR4_FSD;
I2S1_TCR5 = I2S_TCR5_WNW(31) | I2S_TCR5_W0W(31) | I2S_TCR5_FBT(31);

// configure receiver (sync'd to transmitter clocks)
I2S1_RMR = 0;
I2S1_RCR1 = I2S_RCR1_RFW(4);
I2S1_RCR2 = I2S_RCR2_SYNC(rsync) | I2S_TCR2_BCP | I2S_RCR2_MSEL(1)
| I2S_RCR2_BCD | I2S_RCR2_DIV(0);
I2S1_RCR3 = I2S_RCR3_RCE;
I2S1_RCR4 = I2S_RCR4_FRSZ(7) | I2S_RCR4_SYWD(0) | I2S_RCR4_MF
| I2S_RCR4_FSE | I2S_RCR4_FSD;
I2S1_RCR5 = I2S_RCR5_WNW(31) | I2S_RCR5_W0W(31) | I2S_RCR5_FBT(31);

CORE_PIN23_CONFIG = 3; //1:MCLK
CORE_PIN21_CONFIG = 3; //1:RX_BCLK
CORE_PIN20_CONFIG = 3; //1:RX_SYNC
#endif
}

#endif // KINETISK

+ 206
- 0
output_tdm2.cpp Ver arquivo

@@ -0,0 +1,206 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2017, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#include <Arduino.h>
#include "output_tdm2.h"
#include "memcpy_audio.h"
#include "utility/imxrt_hw.h"

audio_block_t * AudioOutputTDM2::block_input[16] = {
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL
};
bool AudioOutputTDM2::update_responsibility = false;
static uint32_t zeros[AUDIO_BLOCK_SAMPLES/2];
static uint32_t tdm_tx_buffer[AUDIO_BLOCK_SAMPLES*16];
DMAChannel AudioOutputTDM2::dma(false);

void AudioOutputTDM2::begin(void)
{
dma.begin(true); // Allocate the DMA channel first

for (int i=0; i < 16; i++) {
block_input[i] = NULL;
}

// TODO: should we set & clear the I2S_TCSR_SR bit here?
config_tdm();

CORE_PIN2_CONFIG = 2; //2:TX_DATA0

dma.TCD->SADDR = tdm_tx_buffer;
dma.TCD->SOFF = 4;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(2) | DMA_TCD_ATTR_DSIZE(2);
dma.TCD->NBYTES_MLNO = 4;
dma.TCD->SLAST = -sizeof(tdm_tx_buffer);
dma.TCD->DADDR = &I2S2_TDR0;
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(tdm_tx_buffer) / 4;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(tdm_tx_buffer) / 4;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);

update_responsibility = update_setup();
dma.enable();

//I2S2_RCSR |= I2S_RCSR_RE;
I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;

dma.attachInterrupt(isr);
}

// TODO: needs optimization...
static void memcpy_tdm_tx(uint32_t *dest, const uint32_t *src1, const uint32_t *src2)
{
uint32_t i, in1, in2, out1, out2;

for (i=0; i < AUDIO_BLOCK_SAMPLES/2; i++) {
in1 = *src1++;
in2 = *src2++;
out1 = (in1 << 16) | (in2 & 0xFFFF);
out2 = (in1 & 0xFFFF0000) | (in2 >> 16);
*dest = out1;
*(dest + 8) = out2;
dest += 16;
}
}

void AudioOutputTDM2::isr(void)
{
uint32_t *dest;
const uint32_t *src1, *src2;
uint32_t i, saddr;

saddr = (uint32_t)(dma.TCD->SADDR);
dma.clearInterrupt();
if (saddr < (uint32_t)tdm_tx_buffer + sizeof(tdm_tx_buffer) / 2) {
// DMA is transmitting the first half of the buffer
// so we must fill the second half
dest = tdm_tx_buffer + AUDIO_BLOCK_SAMPLES*8;
} else {
// DMA is transmitting the second half of the buffer
// so we must fill the first half
dest = tdm_tx_buffer;
}
if (update_responsibility) AudioStream::update_all();
for (i=0; i < 16; i += 2) {
src1 = block_input[i] ? (uint32_t *)(block_input[i]->data) : zeros;
src2 = block_input[i+1] ? (uint32_t *)(block_input[i+1]->data) : zeros;
memcpy_tdm_tx(dest, src1, src2);
dest++;
}
for (i=0; i < 16; i++) {
if (block_input[i]) {
release(block_input[i]);
block_input[i] = NULL;
}
}
}


void AudioOutputTDM2::update(void)
{
audio_block_t *prev[16];
unsigned int i;

__disable_irq();
for (i=0; i < 16; i++) {
prev[i] = block_input[i];
block_input[i] = receiveReadOnly(i);
}
__enable_irq();
for (i=0; i < 16; i++) {
if (prev[i]) release(prev[i]);
}
}

void AudioOutputTDM2::config_tdm(void)
{

CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT*2; //176.4 khZ
// PLL between 27*24 = 648MHz und 54*24=1296MHz
int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
int n2 = 1 + (24000000 * 27) / (fs * 256 * n1);

double C = ((double)fs * 256 * n1 * n2) / 24000000;
int c0 = C;
int c2 = 10000;
int c1 = C * c2 - (c0 * c2);
set_audioClock(c0, c1, c2);
// clear SAI1_CLK register locations

CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4

//n1 = n1 / 2; //Double Speed for TDM

CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1) // &0x07
| CCM_CS2CDR_SAI2_CLK_PODF(n2-1); // &0x3f

IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0)); //Select MCLK



// if either transmitter or receiver is enabled, do nothing
if (I2S2_TCSR & I2S_TCSR_TE) return;
if (I2S2_RCSR & I2S_RCSR_RE) return;

// configure transmitter
int rsync = 1;
int tsync = 0;

I2S2_TMR = 0;
I2S2_TCR1 = I2S_TCR1_RFW(4);
I2S2_TCR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP | I2S_TCR2_MSEL(1)
| I2S_TCR2_BCD | I2S_TCR2_DIV(0);
I2S2_TCR3 = I2S_TCR3_TCE;
I2S2_TCR4 = I2S_TCR4_FRSZ(7) | I2S_TCR4_SYWD(0) | I2S_TCR4_MF
| I2S_TCR4_FSE | I2S_TCR4_FSD;
I2S2_TCR5 = I2S_TCR5_WNW(31) | I2S_TCR5_W0W(31) | I2S_TCR5_FBT(31);

// configure receiver (sync'd to transmitter clocks)
I2S2_RMR = 0;
I2S2_RCR1 = I2S_RCR1_RFW(4);
I2S2_RCR2 = I2S_RCR2_SYNC(rsync) | I2S_TCR2_BCP | I2S_RCR2_MSEL(1)
| I2S_RCR2_BCD | I2S_RCR2_DIV(0);
I2S2_RCR3 = I2S_RCR3_RCE;
I2S2_RCR4 = I2S_RCR4_FRSZ(7) | I2S_RCR4_SYWD(0) | I2S_RCR4_MF
| I2S_RCR4_FSE | I2S_RCR4_FSD;
I2S2_RCR5 = I2S_RCR5_WNW(31) | I2S_RCR5_W0W(31) | I2S_RCR5_FBT(31);

CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC

}

#endif

+ 54
- 0
output_tdm2.h Ver arquivo

@@ -0,0 +1,54 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2017, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#ifndef output_tdm2_h_
#define output_tdm2_h_

#include "Arduino.h"
#include "AudioStream.h"
#include "DMAChannel.h"

class AudioOutputTDM2 : public AudioStream
{
public:
AudioOutputTDM2(void) : AudioStream(16, inputQueueArray) { begin(); }
virtual void update(void);
void begin(void);
friend class AudioInputTDM2;
protected:
static void config_tdm(void);
static audio_block_t *block_input[16];
static bool update_responsibility;
static DMAChannel dma;
static void isr(void);
private:
audio_block_t *inputQueueArray[16];
};


#endif
#endif

Escrever Pré-visualização
Carregando…
Cancelar
Salvar