visus
/
teensy-audio
Obserwuj 1
Polub 0
Forkuj 0
Kod Zgłoszenia 0 Oczekujące zmiany 0 Wydania 0 Wiki Aktywność
Przeglądaj źródła

merge Frank's latest changes

dds
PaulStoffregen 5 lat temu
rodzic
4cd45ef9ba
commit
8746601628
5 zmienionych plików z 382 dodań i 161 usunięć
Widok podzielony Pokaż statystyki zmian
  1. +42
    -10
      input_i2s.cpp
  2. +220
    -151
      output_i2s.cpp
  3. +23
    -0
      output_i2s.h
  4. +56
    -0
      utility/imxrt_hw.cpp
  5. +41
    -0
      utility/imxrt_hw.h

+ 42
- 10
input_i2s.cpp Wyświetl plik

@@ -24,13 +24,13 @@
* THE SOFTWARE.
*/

#if !defined(__IMXRT1052__) && !defined(__IMXRT1062__)

#include <Arduino.h>
#include "input_i2s.h"
#include "output_i2s.h"

DMAMEM static uint32_t i2s_rx_buffer[AUDIO_BLOCK_SAMPLES];
static uint32_t i2s_rx_buffer[AUDIO_BLOCK_SAMPLES];
audio_block_t * AudioInputI2S::block_left = NULL;
audio_block_t * AudioInputI2S::block_right = NULL;
uint16_t AudioInputI2S::block_offset = 0;
@@ -48,8 +48,8 @@ void AudioInputI2S::begin(void)
// TODO: should we set & clear the I2S_RCSR_SR bit here?
AudioOutputI2S::config_i2s();

CORE_PIN13_CONFIG = PORT_PCR_MUX(4); // pin 13, PTC5, I2S0_RXD0
#if defined(KINETISK)
CORE_PIN13_CONFIG = PORT_PCR_MUX(4); // pin 13, PTC5, I2S0_RXD0
dma.TCD->SADDR = (void *)((uint32_t)&I2S0_RDR0 + 2);
dma.TCD->SOFF = 0;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
@@ -61,14 +61,42 @@ void AudioInputI2S::begin(void)
dma.TCD->DLASTSGA = -sizeof(i2s_rx_buffer);
dma.TCD->BITER_ELINKNO = sizeof(i2s_rx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
#endif
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_RX);
update_responsibility = update_setup();
dma.enable();

I2S0_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
#elif defined(__IMXRT1052__) || defined(__IMXRT1062__)

CORE_PIN7_CONFIG = 3; //1:RX_DATA0
dma.TCD->SADDR = (void *)((uint32_t)&I2S1_RDR0+2);
dma.TCD->SOFF = 0;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = 0;
dma.TCD->DADDR = i2s_rx_buffer;
dma.TCD->DOFF = 2;
dma.TCD->CITER_ELINKNO = sizeof(i2s_rx_buffer) / 2;
dma.TCD->DLASTSGA = -sizeof(i2s_rx_buffer);
dma.TCD->BITER_ELINKNO = sizeof(i2s_rx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_RX);

// I2S1_RCSR = 0;
// I2S1_TCSR = 0;
// I2S1_RCSR = (1<<25); //Reset
// I2S1_TCSR = (1<<25); //Reset
I2S1_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE;
/*
I2S1_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
*/
#endif

update_responsibility = update_setup();
dma.enable();
dma.attachInterrupt(isr);
pinMode(13, OUTPUT);
}

void AudioInputI2S::isr(void)
@@ -78,8 +106,8 @@ void AudioInputI2S::isr(void)
int16_t *dest_left, *dest_right;
audio_block_t *left, *right;

//digitalWriteFast(3, HIGH);
#if defined(KINETISK)
digitalWriteFast(13, HIGH);
#if defined(KINETISK) || defined(__IMXRT1052__) || defined(__IMXRT1062__)
daddr = (uint32_t)(dma.TCD->DADDR);
#endif
dma.clearInterrupt();
@@ -104,7 +132,9 @@ void AudioInputI2S::isr(void)
dest_left = &(left->data[offset]);
dest_right = &(right->data[offset]);
AudioInputI2S::block_offset = offset + AUDIO_BLOCK_SAMPLES/2;

do {
//Serial.println(*src);
//n = *src++;
//*dest_left++ = (int16_t)n;
//*dest_right++ = (int16_t)(n >> 16);
@@ -113,7 +143,7 @@ void AudioInputI2S::isr(void)
} while (src < end);
}
}
//digitalWriteFast(3, LOW);
digitalWriteFast(13, LOW);
}


@@ -176,6 +206,7 @@ void AudioInputI2S::update(void)

void AudioInputI2Sslave::begin(void)
{
#if 0
dma.begin(true); // Allocate the DMA channel first

//block_left_1st = NULL;
@@ -204,5 +235,6 @@ void AudioInputI2Sslave::begin(void)
I2S0_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
dma.attachInterrupt(isr);
}
#endif
}


+ 220
- 151
output_i2s.cpp Wyświetl plik

@@ -39,78 +39,17 @@ static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES];
DMAChannel AudioOutputI2S::dma(false);

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#define SAI1
//#define SAI2

typedef struct
{
uint32_t CSR;
uint32_t CR1,CR2,CR3,CR4,CR5;
union {
uint32_t DR[8];
uint16_t DR16[16];
};
uint32_t FR[8];
uint32_t MR;
} I2S_PORT;

typedef struct
{
uint32_t VERID;
uint32_t PARAM;
I2S_PORT TX;
uint32_t unused[9];
I2S_PORT RX;
} I2S_STRUCT;


//TODO: This should probaly be in a common file
PROGMEM
void set_audioClock(int nfact, int32_t nmult, uint32_t ndiv) // sets PLL4
{
if (CCM_ANALOG_PLL_AUDIO & CCM_ANALOG_PLL_AUDIO_ENABLE) return;
CCM_ANALOG_PLL_AUDIO = 0;
//CCM_ANALOG_PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_BYPASS;
CCM_ANALOG_PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE
| CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(2) // 0: 1/4; 1: 1/2; 0: 1/1
| CCM_ANALOG_PLL_AUDIO_DIV_SELECT(nfact);

CCM_ANALOG_PLL_AUDIO_NUM = nmult & CCM_ANALOG_PLL_AUDIO_NUM_MASK;
CCM_ANALOG_PLL_AUDIO_DENOM = ndiv & CCM_ANALOG_PLL_AUDIO_DENOM_MASK;
while (!(CCM_ANALOG_PLL_AUDIO & CCM_ANALOG_PLL_AUDIO_LOCK)) {}; //Wait for pll-lock

const int div_post_pll = 1; // other values: 2,4
CCM_ANALOG_MISC2 &= ~(CCM_ANALOG_MISC2_DIV_MSB | CCM_ANALOG_MISC2_DIV_LSB);
if(div_post_pll>1) CCM_ANALOG_MISC2 |= CCM_ANALOG_MISC2_DIV_LSB;
if(div_post_pll>3) CCM_ANALOG_MISC2 |= CCM_ANALOG_MISC2_DIV_MSB;
}

I2S_STRUCT *i2s;

void sai_rxConfig(int nbits, int nw, int sync)
{
i2s->RX.MR = 0;
i2s->RX.CSR = 0;
i2s->RX.CR1 = I2S_RCR1_RFW(1);
i2s->RX.CR2 = I2S_RCR2_SYNC(sync) | I2S_RCR2_BCP // sync=0; rx is async;
| (I2S_RCR2_BCD | I2S_RCR2_DIV((1)) | I2S_RCR2_MSEL(1));
i2s->RX.CR3 = I2S_RCR3_RCE;
i2s->RX.CR4 = I2S_RCR4_FRSZ((nw-1)) | I2S_RCR4_SYWD((nbits-1)) | I2S_RCR4_MF | I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
i2s->RX.CR5 = I2S_RCR5_WNW((nbits-1)) | I2S_RCR5_W0W((nbits-1)) | I2S_RCR5_FBT((nbits-1));
}

void sai_txConfig(int nbits, int nw, int sync)
{
i2s->TX.MR = 0;
i2s->TX.CSR = 0;
i2s->TX.CR1 = I2S_TCR1_RFW(1);
i2s->TX.CR2 = I2S_TCR2_SYNC(sync) | I2S_TCR2_BCP // sync=0; tx is async;
| (I2S_TCR2_BCD | I2S_TCR2_DIV((1)) | I2S_TCR2_MSEL(1));
i2s->TX.CR3 = I2S_TCR3_TCE;
i2s->TX.CR4 = I2S_TCR4_FRSZ((nw-1)) | I2S_TCR4_SYWD((nbits-1)) | I2S_TCR4_MF | I2S_TCR4_FSD | I2S_TCR4_FSE | I2S_TCR4_FSP;
i2s->TX.CR5 = I2S_TCR5_WNW((nbits-1)) | I2S_TCR5_W0W((nbits-1)) | I2S_TCR5_FBT((nbits-1));
}
#include "utility/imxrt_hw.h"

//TODO: Copy these to imrtx.h:
#if !defined(I2S_TCR2_BCP)
#define I2S_TCR2_BCP ((uint32_t)1<<25)
#define I2S_RCR2_BCP ((uint32_t)1<<25)
#define I2S_TCR4_FCONT ((uint32_t)1<<28) // FIFO Continue on Error
#define I2S_RCR4_FCONT ((uint32_t)1<<28) // FIFO Continue on Error
#define I2S_TCR4_FSP ((uint32_t)1<< 1)
#define I2S_RCR4_FSP ((uint32_t)1<< 1)
#endif

void AudioOutputI2S::begin(void)
{
@@ -119,67 +58,12 @@ void AudioOutputI2S::begin(void)
block_left_1st = NULL;
block_right_1st = NULL;

//Pins:
#if defined(SAI1)
CORE_PIN23_CONFIG = 3; //1:MCLK
CORE_PIN21_CONFIG = 3; //1:RX_BCLK
CORE_PIN20_CONFIG = 3; //1:RX_SYNC
CORE_PIN7_CONFIG = 3; //1:RX_DATA0
config_i2s();
CORE_PIN6_CONFIG = 3; //1:TX_DATA0
#elif defined(SAI2)
CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC
CORE_PIN2_CONFIG = 2; //2:TX_DATA0
CORE_PIN33_CONFIG = 2; //2:RX_DATA0
#endif
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
int n2 = 1 + (24000000 * 27) / (fs * 256 * n1);
double C = ((double)fs * 256 * n1 * n2) / 24000000;
int c0 = C;
int c2 = 10000;
int c1 = C * c2 - (c0 * c2);
set_audioClock(c0, c1, c2);
//int nch = 1;// number of channels
int nw = 2; // words / channel
int nbits = 32;// bits / word
//SAI PG 2735
#if defined(SAI1)
CCM_CCGR5 |= CCM_CCGR5_SAI1(CCM_CCGR_ON);

// clear SAI1_CLK register locations
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI1_CLK_SEL_MASK))
| CCM_CSCMR1_SAI1_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4
CCM_CS1CDR = (CCM_CS1CDR & ~(CCM_CS1CDR_SAI1_CLK_PRED_MASK | CCM_CS1CDR_SAI1_CLK_PODF_MASK))
| CCM_CS1CDR_SAI1_CLK_PRED(n1-1) // &0x07
| CCM_CS1CDR_SAI1_CLK_PODF(n2-1); // &0x3f

IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI1_MCLK_DIR | IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL(0)); //Select MCLK
i2s = ((I2S_STRUCT *)0x40384000);
sai_rxConfig(nbits, nw, 0);
sai_txConfig(nbits, nw, 1);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_TX);
#elif defined(SAI2)
CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);
#if defined(SAI2)
CORE_PIN2_CONFIG = 2; //2:TX_DATA0
#endif

CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1) | CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0)); //Select MCLK
i2s = ((I2S_STRUCT *)0x40388000);
sai_rxConfig(nbits, nw, 1);
sai_txConfig(nbits, nw, 0);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);
#endif
dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
@@ -190,13 +74,19 @@ void AudioOutputI2S::begin(void)
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)&i2s->TX.DR16[1];
dma.TCD->DADDR = (void *)((uint32_t)&I2S1_TDR0 + 2);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_TX);
//I2S1_RCSR = (1<<25); //Reset
//I2S1_TCSR = (1<<25); //Reset
I2S1_RCSR |= I2S_RCSR_RE;
//I2S1_TCSR = I2S_TCSR_SR;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
#if defined(SAI2)
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);
I2S2_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE; //SAI2
#endif
update_responsibility = update_setup();
dma.attachInterrupt(isr);

i2s->RX.CSR |= I2S_RCSR_FRDE | I2S_RCSR_FR | I2S_RCSR_RE | I2S_RCSR_BCE;
i2s->TX.CSR |= I2S_TCSR_FRDE | I2S_TCSR_FR | I2S_TCSR_TE | I2S_TCSR_BCE;

dma.enable();
}

@@ -230,6 +120,7 @@ void AudioOutputI2S::begin(void)
update_responsibility = update_setup();
dma.enable();


I2S0_TCSR = I2S_TCSR_SR;
I2S0_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
dma.attachInterrupt(isr);
@@ -461,9 +352,12 @@ void AudioOutputI2S::update(void)
#define MCLK_SRC 0 // system clock
#endif
#endif
#endif


void AudioOutputI2S::config_i2s(void)
{
#if defined(KINETISK) || defined(KINETISL)
SIM_SCGC6 |= SIM_SCGC6_I2S;
SIM_SCGC7 |= SIM_SCGC7_DMA;
SIM_SCGC6 |= SIM_SCGC6_DMAMUX;
@@ -501,14 +395,98 @@ void AudioOutputI2S::config_i2s(void)
CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK)
CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK
CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK
}
#elif ( defined(__IMXRT1052__) || defined(__IMXRT1062__) )

CCM_CCGR5 |= CCM_CCGR5_SAI1(CCM_CCGR_ON);
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
int n2 = 1 + (24000000 * 27) / (fs * 256 * n1);

double C = ((double)fs * 256 * n1 * n2) / 24000000;
int c0 = C;
int c2 = 10000;
int c1 = C * c2 - (c0 * c2);
set_audioClock(c0, c1, c2);

// clear SAI1_CLK register locations
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI1_CLK_SEL_MASK))
| CCM_CSCMR1_SAI1_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4
CCM_CS1CDR = (CCM_CS1CDR & ~(CCM_CS1CDR_SAI1_CLK_PRED_MASK | CCM_CS1CDR_SAI1_CLK_PODF_MASK))
| CCM_CS1CDR_SAI1_CLK_PRED(n1-1) // &0x07
| CCM_CS1CDR_SAI1_CLK_PODF(n2-1); // &0x3f

IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI1_MCLK_DIR | IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL(0)); //Select MCLK

// if either transmitter or receiver is enabled, do nothing
if (I2S1_TCSR & I2S_TCSR_TE) return;
if (I2S1_RCSR & I2S_RCSR_RE) return;

CORE_PIN23_CONFIG = 3; //1:MCLK
CORE_PIN21_CONFIG = 3; //1:RX_BCLK
CORE_PIN20_CONFIG = 3; //1:RX_SYNC
// CORE_PIN6_CONFIG = 3; //1:TX_DATA0
// CORE_PIN7_CONFIG = 3; //1:RX_DATA0

#if defined(SAI2)
i2s = ((I2S_STRUCT *)0x40388000);
if (i2s->TX.CSR & I2S_TCSR_TE) return;
if (i2s->RX.CSR & I2S_RCSR_RE) return;

CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC
// CORE_PIN2_CONFIG = 2; //2:TX_DATA0
// CORE_PIN33_CONFIG = 2; //2:RX_DATA0
#endif

int rsync = 0;
int tsync = 1;

I2S1_TMR = 0;
//I2S1_TCSR = (1<<25); //Reset
I2S1_TCR1 = I2S_TCR1_RFW(1);
I2S1_TCR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP // sync=0; tx is async;
| (I2S_TCR2_BCD | I2S_TCR2_DIV((1)) | I2S_TCR2_MSEL(1));
I2S1_TCR3 = I2S_TCR3_TCE;
I2S1_TCR4 = I2S_TCR4_FRSZ((2-1)) | I2S_TCR4_SYWD((32-1)) | I2S_TCR4_MF | I2S_TCR4_FSD | I2S_TCR4_FSE | I2S_TCR4_FSP;
I2S1_TCR5 = I2S_TCR5_WNW((32-1)) | I2S_TCR5_W0W((32-1)) | I2S_TCR5_FBT((32-1));

I2S1_RMR = 0;
//I2S1_RCSR = (1<<25); //Reset
I2S1_RCR1 = I2S_RCR1_RFW(1);
I2S1_RCR2 = I2S_RCR2_SYNC(rsync) | I2S_RCR2_BCP // sync=0; rx is async;
| (I2S_RCR2_BCD | I2S_RCR2_DIV((1)) | I2S_RCR2_MSEL(1));
I2S1_RCR3 = I2S_RCR3_RCE;
I2S1_RCR4 = I2S_RCR4_FRSZ((2-1)) | I2S_RCR4_SYWD((32-1)) | I2S_RCR4_MF | I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
I2S1_RCR5 = I2S_RCR5_WNW((32-1)) | I2S_RCR5_W0W((32-1)) | I2S_RCR5_FBT((32-1));


#if defined(SAI2)
CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);

CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1) | CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0)); //Select MCLK
sai_rxConfig(32, 2, 1);
sai_txConfig(32, 2, 0);

#endif

}
#endif


/******************************************************************/

void AudioOutputI2Sslave::begin(void)
{
#if 0
dma.begin(true); // Allocate the DMA channel first

//pinMode(2, OUTPUT);
@@ -516,8 +494,9 @@ void AudioOutputI2Sslave::begin(void)
block_right_1st = NULL;

AudioOutputI2Sslave::config_i2s();
CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0
#if defined(KINETISK)
CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0
dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
@@ -529,26 +508,52 @@ void AudioOutputI2Sslave::begin(void)
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
#endif
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX);
update_responsibility = update_setup();
dma.enable();

I2S0_TCSR = I2S_TCSR_SR;
I2S0_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;

#elif 0 && ( defined(__IMXRT1052__) || defined(__IMXRT1062__) )
#if defined(SAI1)
CORE_PIN6_CONFIG = 3; //1:TX_DATA0
//CORE_PIN7_CONFIG = 3; //1:RX_DATA0
#elif defined(SAI2)
CORE_PIN2_CONFIG = 2; //2:TX_DATA0
//CORE_PIN33_CONFIG = 2; //2:RX_DATA0
#endif
dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->DADDR = (void *)&i2s->TX.DR16[1];
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);
#endif

update_responsibility = update_setup();
dma.enable();
dma.attachInterrupt(isr);
#endif
}

void AudioOutputI2Sslave::config_i2s(void)
{
SIM_SCGC6 |= SIM_SCGC6_I2S;
SIM_SCGC7 |= SIM_SCGC7_DMA;
SIM_SCGC6 |= SIM_SCGC6_DMAMUX;

#if defined(KINETISK)
// if either transmitter or receiver is enabled, do nothing
if (I2S0_TCSR & I2S_TCSR_TE) return;
if (I2S0_RCSR & I2S_RCSR_RE) return;

SIM_SCGC6 |= SIM_SCGC6_I2S;
SIM_SCGC7 |= SIM_SCGC7_DMA;
SIM_SCGC6 |= SIM_SCGC6_DMAMUX;
// configure pin mux for 3 clock signals

CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK)
CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK
CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK
// Select input clock 0
// Configure to input the bit-clock from pin, bypasses the MCLK divider
I2S0_MCR = I2S_MCR_MICS(0);
@@ -576,9 +581,73 @@ void AudioOutputI2Sslave::config_i2s(void)

I2S0_RCR5 = I2S_RCR5_WNW(31) | I2S_RCR5_W0W(31) | I2S_RCR5_FBT(31);

// configure pin mux for 3 clock signals
CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK)
CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK
CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK
}
#elif 0 && (defined(__IMXRT1052__) || defined(__IMXRT1062__) )

#if defined(SAI1)
i2s = ((I2S_STRUCT *)0x40384000);
// if either transmitter or receiver is enabled, do nothing
if (i2s->TX.CSR & I2S_TCSR_TE) return;
if (i2s->RX.CSR & I2S_RCSR_RE) return;

CCM_CCGR5 |= CCM_CCGR5_SAI1(CCM_CCGR_ON);
/*
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI1_CLK_SEL_MASK))
| CCM_CSCMR1_SAI1_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4
CCM_CS1CDR = (CCM_CS1CDR & ~(CCM_CS1CDR_SAI1_CLK_PRED_MASK | CCM_CS1CDR_SAI1_CLK_PODF_MASK))
| CCM_CS1CDR_SAI1_CLK_PRED(n1-1) // &0x07
| CCM_CS1CDR_SAI1_CLK_PODF(n2-1); // &0x3f
*/
//TODO:
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL_MASK | ((uint32_t)(1<<20)) ))
| (IOMUXC_GPR_GPR1_SAI1_MCLK_DIR | IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL(0)); //Select MCLK

CORE_PIN23_CONFIG = 3; //1:MCLK
CORE_PIN21_CONFIG = 3; //1:RX_BCLK
CORE_PIN20_CONFIG = 3; //1:RX_SYNC
int rsync = 0;
int tsync = 1;
#elif defined(SAI2)
i2s = ((I2S_STRUCT *)0x40388000);
if (i2s->TX.CSR & I2S_TCSR_TE) return;
if (i2s->RX.CSR & I2S_RCSR_RE) return;

CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);
/*
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1) | CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
*/
//TODO:

IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK | ((uint32_t)(1<<19)) ))
/*| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR*/ | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0); //Select MCLK

CORE_PIN5_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC
int rsync = 1;
int tsync = 0;

#endif

// configure transmitter
i2s->TX.MR = 0;
i2s->TX.CR1 = I2S_TCR1_RFW(1); // watermark at half fifo size
i2s->TX.CR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP;
i2s->TX.CR3 = I2S_TCR3_TCE;
i2s->TX.CR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(31) | I2S_TCR4_MF
| I2S_TCR4_FSE | I2S_TCR4_FSP;
i2s->TX.CR5 = I2S_TCR5_WNW(31) | I2S_TCR5_W0W(31) | I2S_TCR5_FBT(31);

// configure receiver
i2s->RX.MR = 0;
i2s->RX.CR1 = I2S_RCR1_RFW(1);
i2s->RX.CR2 = I2S_RCR2_SYNC(rsync) | I2S_TCR2_BCP;
i2s->RX.CR3 = I2S_RCR3_RCE;
i2s->RX.CR4 = I2S_RCR4_FRSZ(1) | I2S_RCR4_SYWD(31) | I2S_RCR4_MF
| I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
i2s->RX.CR5 = I2S_RCR5_WNW(31) | I2S_RCR5_W0W(31) | I2S_RCR5_FBT(31);

#endif
}

+ 23
- 0
output_i2s.h Wyświetl plik

@@ -31,6 +31,29 @@
#include "AudioStream.h"
#include "DMAChannel.h"

/*
typedef struct
{
uint32_t CSR;
uint32_t CR1,CR2,CR3,CR4,CR5;
union {
uint32_t DR[8];
uint16_t DR16[16];
};
uint32_t FR[8];
uint32_t MR;
} I2S_PORT;

typedef struct
{
uint32_t VERID;
uint32_t PARAM;
I2S_PORT TX;
uint32_t unused[9];
I2S_PORT RX;
} I2S_STRUCT;
*/

class AudioOutputI2S : public AudioStream
{
public:

+ 56
- 0
utility/imxrt_hw.cpp Wyświetl plik

@@ -0,0 +1,56 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2019, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/*
(c) Frank b
*/

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
#include "imxrt_hw.h"

//#define CCM_ANALOG_PLL_AUDIO_LOCK ((uint32_t)(1<<31))

PROGMEM
void set_audioClock(int nfact, int32_t nmult, uint32_t ndiv) // sets PLL4
{
if (CCM_ANALOG_PLL_AUDIO & CCM_ANALOG_PLL_AUDIO_ENABLE) return;

CCM_ANALOG_PLL_AUDIO = 0;
//CCM_ANALOG_PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_BYPASS;
CCM_ANALOG_PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE
| CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(2) // 0: 1/4; 1: 1/2; 0: 1/1
| CCM_ANALOG_PLL_AUDIO_DIV_SELECT(nfact);

CCM_ANALOG_PLL_AUDIO_NUM = nmult & CCM_ANALOG_PLL_AUDIO_NUM_MASK;
CCM_ANALOG_PLL_AUDIO_DENOM = ndiv & CCM_ANALOG_PLL_AUDIO_DENOM_MASK;
while (!(CCM_ANALOG_PLL_AUDIO & CCM_ANALOG_PLL_AUDIO_LOCK)) {}; //Wait for pll-lock

const int div_post_pll = 1; // other values: 2,4
CCM_ANALOG_MISC2 &= ~(CCM_ANALOG_MISC2_DIV_MSB | CCM_ANALOG_MISC2_DIV_LSB);
if(div_post_pll>1) CCM_ANALOG_MISC2 |= CCM_ANALOG_MISC2_DIV_LSB;
if(div_post_pll>3) CCM_ANALOG_MISC2 |= CCM_ANALOG_MISC2_DIV_MSB;
}

#endif

+ 41
- 0
utility/imxrt_hw.h Wyświetl plik

@@ -0,0 +1,41 @@
/* Audio Library for Teensy 3.X
* Copyright (c) 2019, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/*
(c) Frank b
*/

#if defined(__IMXRT1052__) || defined(__IMXRT1062__)

#ifndef imxr_hw_h_
#define imxr_hw_h_

#include <Arduino.h>
#include <imxrt.h>

void set_audioClock(int nfact, int32_t nmult, uint32_t ndiv); // sets PLL4

#endif
#endif

Napisz Podgląd
Ładowanie…
Anuluj
Zapisz