AIC3206: Bug fixes

control_tlv320aic3206.cpp

 #  define AIC_FS                                                     44100UL
 #endif
 
-//define AIC_BITS                                                        16
-#define AIC_BITS                                                        32
+#define AIC_BITS                                                        16
+//#define AIC_BITS                                                        32
 
 #define AIC_I2S_SLAVE                                                     1
 #if AIC_I2S_SLAVE

control_tlv320aic3206.h

 		This code defaults to Teensy Pin 21, which was used on Tympan Rev C.
 		You can set the reset pin in the constructor
 		
+	Note that this can configure the AIC for 32-bit per sample I2S transfers or 16-bit per sample.
+		Defaults to 16 bits per sample to allow it to work with default Teensy audio library.
 	
 	Example Usage for Teensy:
 	
 		#include <Audio.h>	//Teensy Audio Library
-		int AIC3206_RESET_PIN		  21   //What pin is your AIC3206 reset pin connected to?
+		int AIC3206_RESET_PIN=21;     //What pin is your AIC3206 reset pin connected to?
 		AudioControlTLV320AIC3206     audioHardware(AIC3206_RESET_PIN);
 		AudioInputI2S                 i2s_in;        //Digital audio *from* the AIC.
 		AudioOutputI2S                i2s_out;       //Digital audio *to* the AIC.
 
 		  //Choose the desired input
 		  audioHardware.inputSelect(AIC3206_INPUT_IN1);       // use Input 1
-		  //audioHardware.setMicBias(AIC3206_MIC_BIAS_2_5);   // set mic bias to 2.5V
-		  //audioHardware.setHPFonADC(20.0); 				  // in the hardware, add a highpass filter at 20Hz to block DC
 
 		  //Set the desired volume levels
 		  audioHardware.volume_dB(0);                   // headphone amplifier.  -63.6 to +24 dB in 0.5dB steps.
 #ifndef control_tlv320aic3206_h_
 #define control_tlv320aic3206_h_
 
-#include "TeensyAudioControl.h"
+#include "AudioControl.h"
 #include <Arduino.h>
 
 //convenience names to use with inputSelect() to set whnch analog inputs to use
 #define LEFT_CHAN 1
 #define RIGHT_CHAN 2
 
-class AudioControlTLV320AIC3206: public TeensyAudioControl
+class AudioControlTLV320AIC3206: public AudioControl
 {
-public:
-	//GUI: inputs:0, outputs:0  //this line used for automatic generation of GUI node
-	AudioControlTLV320AIC3206(void) { debugToSerial = false; };
-	AudioControlTLV320AIC3206(bool _debugToSerial) { debugToSerial = _debugToSerial; };
-	AudioControlTLV320AIC3206(int _resetPin) { debugToSerial = false; resetPinAIC = _resetPin; }
-	AudioControlTLV320AIC3206(int _resetPin, bool _debugToSerial) {  resetPinAIC = _resetPin; debugToSerial = _debugToSerial; };
-	bool enable(void);
-	bool disable(void);
-	bool outputSelect(int n);
-	bool volume(float n);
-	bool volume_dB(float n);
-	bool inputLevel(float n);  //dummy to be compatible with Teensy Audio Library
-	bool inputSelect(int n);
-	bool setInputGain_dB(float n);
-	bool setMicBias(int n);
-	bool updateInputBasedOnMicDetect(int setting = TYMPAN_INPUT_JACK_AS_MIC);
-	bool enableMicDetect(bool);
-	int  readMicDetect(void);
-	bool debugToSerial;
-    unsigned int aic_readPage(uint8_t page, uint8_t reg);
-    bool aic_writePage(uint8_t page, uint8_t reg, uint8_t val);
-	void setHPFonADC(bool enable, float cutoff_Hz, float fs_Hz);
-	float getHPCutoff_Hz(void) { return HP_cutoff_Hz; }
-	float getSampleRate_Hz(void) { return sample_rate_Hz; }
-	void setIIRCoeffOnADC(int chan, uint32_t *coeff);
-	bool enableAutoMuteDAC(bool, uint8_t);
-private:
-  void aic_reset(void);
-  void aic_init(void);
-  void aic_initDAC(void);
-  void aic_initADC(void);
-
-  bool aic_writeAddress(uint16_t address, uint8_t val);
-  bool aic_goToPage(uint8_t page);
-  int prevMicDetVal = -1;
-  int resetPinAIC = 21;  //AIC reset pin, Tympan Rev C
-  float HP_cutoff_Hz = 0.0f;
-  float sample_rate_Hz = 44100; //only used with HP_cutoff_Hz to design HP filter on ADC, if used
-  void setIIRCoeffOnADC_Left(uint32_t *coeff);
-  void setIIRCoeffOnADC_Right(uint32_t *coeff);
+	public:
+		//GUI: inputs:0, outputs:0  //this line used for automatic generation of GUI node
+		AudioControlTLV320AIC3206(void) { debugToSerial = false; };
+		AudioControlTLV320AIC3206(bool _debugToSerial) { debugToSerial = _debugToSerial; };
+		AudioControlTLV320AIC3206(int _resetPin) { debugToSerial = false; resetPinAIC = _resetPin; }
+		AudioControlTLV320AIC3206(int _resetPin, bool _debugToSerial) {  resetPinAIC = _resetPin; debugToSerial = _debugToSerial; };
+		bool enable(void);
+		bool disable(void);
+		bool outputSelect(int n);
+		bool volume(float n);
+		bool volume_dB(float n);
+		bool inputLevel(float n);  //dummy to be compatible with Teensy Audio Library
+		bool inputSelect(int n);
+		bool setInputGain_dB(float n);
+		bool setMicBias(int n);
+		bool updateInputBasedOnMicDetect(int setting = AIC3206_INPUT_IN1); //which input to monitor
+		bool enableMicDetect(bool);
+		int  readMicDetect(void);
+		bool debugToSerial;
+		unsigned int aic_readPage(uint8_t page, uint8_t reg);
+		bool aic_writePage(uint8_t page, uint8_t reg, uint8_t val);
+		void setHPFonADC(bool enable, float cutoff_Hz, float fs_Hz);
+		float getHPCutoff_Hz(void) { return HP_cutoff_Hz; }
+		float getSampleRate_Hz(void) { return sample_rate_Hz; }
+		void setIIRCoeffOnADC(int chan, uint32_t *coeff);
+		bool enableAutoMuteDAC(bool, uint8_t);
+	private:
+	  void aic_reset(void);
+	  void aic_init(void);
+	  void aic_initDAC(void);
+	  void aic_initADC(void);
+
+	  bool aic_writeAddress(uint16_t address, uint8_t val);
+	  bool aic_goToPage(uint8_t page);
+	  int prevMicDetVal = -1;
+	  int resetPinAIC = 21;  //AIC reset pin, Tympan Rev C
+	  float HP_cutoff_Hz = 0.0f;
+	  float sample_rate_Hz = 44100; //only used with HP_cutoff_Hz to design HP filter on ADC, if used
+	  void setIIRCoeffOnADC_Left(uint32_t *coeff);
+	  void setIIRCoeffOnADC_Right(uint32_t *coeff);
 };