Pārlūkot izejas kodu

Fix simultaneous I2S input & output on Teensy 4.0

dds
PaulStoffregen pirms 5 gadiem
vecāks
revīzija
bd5332f9d9
2 mainītis faili ar 30 papildinājumiem un 52 dzēšanām
  1. +5
    -14
      input_i2s.cpp
  2. +25
    -38
      output_i2s.cpp

+ 5
- 14
input_i2s.cpp Parādīt failu

@@ -65,16 +65,12 @@ void AudioInputI2S::begin(void)

I2S0_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
#elif defined(__IMXRT1052__) || defined(__IMXRT1062__)

#if defined(__IMXRT1062__)
#elif defined(__IMXRT1062__)
CORE_PIN8_CONFIG = 3; //1:RX_DATA0
#elif defined(__IMXRT1052__)
CORE_PIN7_CONFIG = 3; //1:RX_DATA0
#endif
IOMUXC_SAI1_RX_DATA0_SELECT_INPUT = 2;
dma.TCD->SADDR = (void *)((uint32_t)&I2S1_RDR0+2);
dma.TCD->SADDR = (void *)((uint32_t)&I2S1_RDR0 + 2);
dma.TCD->SOFF = 0;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
@@ -87,15 +83,11 @@ void AudioInputI2S::begin(void)
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_RX);

I2S1_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE;

I2S1_RCSR = I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
#endif

update_responsibility = update_setup();
dma.enable();
dma.attachInterrupt(isr);
//pinMode(13, OUTPUT);
}

void AudioInputI2S::isr(void)
@@ -105,11 +97,11 @@ void AudioInputI2S::isr(void)
int16_t *dest_left, *dest_right;
audio_block_t *left, *right;

//digitalWriteFast(13, HIGH);
#if defined(KINETISK) || defined(__IMXRT1052__) || defined(__IMXRT1062__)
#if defined(KINETISK) || defined(__IMXRT1062__)
daddr = (uint32_t)(dma.TCD->DADDR);
#endif
dma.clearInterrupt();
//Serial.println("isr");

if (daddr < (uint32_t)i2s_rx_buffer + sizeof(i2s_rx_buffer) / 2) {
// DMA is receiving to the first half of the buffer
@@ -142,7 +134,6 @@ void AudioInputI2S::isr(void)
} while (src < end);
}
}
//digitalWriteFast(13, LOW);
}



+ 25
- 38
output_i2s.cpp Parādīt failu

@@ -40,6 +40,7 @@ DMAMEM __attribute__((aligned(32))) static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SA

#if defined(__IMXRT1062__)
#include "utility/imxrt_hw.h"
#endif

void AudioOutputI2S::begin(void)
{
@@ -49,66 +50,50 @@ void AudioOutputI2S::begin(void)
block_right_1st = NULL;

config_i2s();
CORE_PIN7_CONFIG = 3; //1:TX_DATA0

#if defined(KINETISK)
CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0

dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->DADDR = (void *)((uint32_t)&I2S0_TDR0 + 2);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S1_TDR0 + 2);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_TX);

I2S1_RCSR |= I2S_RCSR_RE;
I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;

update_responsibility = update_setup();
dma.attachInterrupt(isr);
dma.enable();
}

#endif

#if defined(KINETISK)
void AudioOutputI2S::begin(void)
{
dma.begin(true); // Allocate the DMA channel first
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX);

block_left_1st = NULL;
block_right_1st = NULL;
I2S0_TCSR = I2S_TCSR_SR;
I2S0_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;

// TODO: should we set & clear the I2S_TCSR_SR bit here?
config_i2s();
CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0
#elif defined(__IMXRT1062__)
CORE_PIN7_CONFIG = 3; //1:TX_DATA0

dma.TCD->SADDR = i2s_tx_buffer;
dma.TCD->SOFF = 2;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = -sizeof(i2s_tx_buffer);
dma.TCD->DADDR = (void *)((uint32_t)&I2S0_TDR0 + 2);
dma.TCD->DOFF = 0;
dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->DLASTSGA = 0;
dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S1_TDR0 + 2);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_TX);

dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX);
I2S1_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE;
I2S1_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
#endif
update_responsibility = update_setup();
dma.enable();


I2S0_TCSR = I2S_TCSR_SR;
I2S0_TCSR = I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
dma.attachInterrupt(isr);
dma.enable();
}
#endif


void AudioOutputI2S::isr(void)
{
@@ -383,6 +368,10 @@ void AudioOutputI2S::config_i2s(void)
#elif defined(__IMXRT1062__)

CCM_CCGR5 |= CCM_CCGR5_SAI1(CCM_CCGR_ON);

// if either transmitter or receiver is enabled, do nothing
if (I2S1_TCSR & I2S_TCSR_TE) return;
if (I2S1_RCSR & I2S_RCSR_RE) return;
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
@@ -407,10 +396,6 @@ void AudioOutputI2S::config_i2s(void)
& ~(IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI1_MCLK_DIR | IOMUXC_GPR_GPR1_SAI1_MCLK1_SEL(0));

// if either transmitter or receiver is enabled, do nothing
if (I2S1_TCSR & I2S_TCSR_TE) return;
if (I2S1_RCSR & I2S_RCSR_RE) return;

CORE_PIN23_CONFIG = 3; //1:MCLK
CORE_PIN21_CONFIG = 3; //1:RX_BCLK
CORE_PIN20_CONFIG = 3; //1:RX_SYNC
@@ -424,7 +409,8 @@ void AudioOutputI2S::config_i2s(void)
I2S1_TCR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP // sync=0; tx is async;
| (I2S_TCR2_BCD | I2S_TCR2_DIV((1)) | I2S_TCR2_MSEL(1));
I2S1_TCR3 = I2S_TCR3_TCE;
I2S1_TCR4 = I2S_TCR4_FRSZ((2-1)) | I2S_TCR4_SYWD((32-1)) | I2S_TCR4_MF | I2S_TCR4_FSD | I2S_TCR4_FSE | I2S_TCR4_FSP;
I2S1_TCR4 = I2S_TCR4_FRSZ((2-1)) | I2S_TCR4_SYWD((32-1)) | I2S_TCR4_MF
| I2S_TCR4_FSD | I2S_TCR4_FSE | I2S_TCR4_FSP;
I2S1_TCR5 = I2S_TCR5_WNW((32-1)) | I2S_TCR5_W0W((32-1)) | I2S_TCR5_FBT((32-1));

I2S1_RMR = 0;
@@ -433,7 +419,8 @@ void AudioOutputI2S::config_i2s(void)
I2S1_RCR2 = I2S_RCR2_SYNC(rsync) | I2S_RCR2_BCP // sync=0; rx is async;
| (I2S_RCR2_BCD | I2S_RCR2_DIV((1)) | I2S_RCR2_MSEL(1));
I2S1_RCR3 = I2S_RCR3_RCE;
I2S1_RCR4 = I2S_RCR4_FRSZ((2-1)) | I2S_RCR4_SYWD((32-1)) | I2S_RCR4_MF | I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
I2S1_RCR4 = I2S_RCR4_FRSZ((2-1)) | I2S_RCR4_SYWD((32-1)) | I2S_RCR4_MF
| I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
I2S1_RCR5 = I2S_RCR5_WNW((32-1)) | I2S_RCR5_W0W((32-1)) | I2S_RCR5_FBT((32-1));

#endif

Notiek ielāde…
Atcelt
Saglabāt