Add 8 channel input example

examples/Analysis/PeakAndRMSMeter8Channel/PeakAndRMSMeter8Channel.ino

@@ -0,0 +1,149 @@
+/* Show levels (RMS & Peak) for 8 I2S microphone inputs
+ * 
+ * Connect 8 INMP411 I2S microphones to Teensy 4.0
+ *   Pin 8    SD on mics #1 and #2
+ *   Pin 6    SD on mics #3 and #4
+ *   Pin 9    SD on mics #5 and #6
+ *   Pin 32   SD on mics #7 and #8
+ *   Pin 20   WS on all mics
+ *   Pin 21   SCK on all mics
+ *   
+ * Each mic needs GND to Teensy GND, VCC to Teensy 3.3V.
+ * Connect L/R to GND on the odd numbered mics
+ *   and L/R to 3.3V on the even numbered mics.
+ * 
+ * Optional - connect a Teensy Audio Shield or other I2S
+ * output device, but do not connect it to pin 8, because
+ * the INMP411 mics #1 & #2 send their signal to pin 8.
+ * 
+ * This example code is in the public domain
+ */
+
+#include <Audio.h>
+#include <Wire.h>
+#include <SPI.h>
+#include <SD.h>
+#include <SerialFlash.h>
+
+// If INMP411 mics are not available, the audio shield mic can
+// be used, but it will send a single signal to inputs #1 & #2
+// (if connected to pin 8).
+//const int myInput = AUDIO_INPUT_LINEIN;
+const int myInput = AUDIO_INPUT_MIC;
+
+AudioInputI2SOct     audioInput;   // audio shield: mic or line-in
+AudioAmplifier       amp1;
+AudioAmplifier       amp2;
+AudioAmplifier       amp3;
+AudioAmplifier       amp4;
+AudioAmplifier       amp5;
+AudioAmplifier       amp6;
+AudioAmplifier       amp7;
+AudioAmplifier       amp8;
+AudioAnalyzeRMS      rms1;
+AudioAnalyzeRMS      rms2;
+AudioAnalyzeRMS      rms3;
+AudioAnalyzeRMS      rms4;
+AudioAnalyzeRMS      rms5;
+AudioAnalyzeRMS      rms6;
+AudioAnalyzeRMS      rms7;
+AudioAnalyzeRMS      rms8;
+AudioAnalyzePeak     peak1;
+AudioAnalyzePeak     peak2;
+AudioAnalyzePeak     peak3;
+AudioAnalyzePeak     peak4;
+AudioAnalyzePeak     peak5;
+AudioAnalyzePeak     peak6;
+AudioAnalyzePeak     peak7;
+AudioAnalyzePeak     peak8;
+AudioOutputI2S       audioOutput;    // audio shield: headphones & line-out
+
+// Send all microphone signals to amps
+AudioConnection r1(audioInput, 0, amp1, 0);
+AudioConnection r2(audioInput, 1, amp2, 0);
+AudioConnection r3(audioInput, 2, amp3, 0);
+AudioConnection r4(audioInput, 3, amp4, 0);
+AudioConnection r5(audioInput, 4, amp5, 0);
+AudioConnection r6(audioInput, 5, amp6, 0);
+AudioConnection r7(audioInput, 6, amp7, 0);
+AudioConnection r8(audioInput, 7, amp8, 0);
+
+// Connect the amps to RMS and Peak analyzers
+AudioConnection a1(amp1, 0, rms1, 0);
+AudioConnection a2(amp2, 0, rms2, 0);
+AudioConnection a3(amp3, 0, rms3, 0);
+AudioConnection a4(amp4, 0, rms4, 0);
+AudioConnection a5(amp5, 0, rms5, 0);
+AudioConnection a6(amp6, 0, rms6, 0);
+AudioConnection a7(amp7, 0, rms7, 0);
+AudioConnection a8(amp8, 0, rms8, 0);
+AudioConnection p1(amp1, 0, peak1, 0);
+AudioConnection p2(amp2, 0, peak2, 0);
+AudioConnection p3(amp3, 0, peak3, 0);
+AudioConnection p4(amp4, 0, peak4, 0);
+AudioConnection p5(amp5, 0, peak5, 0);
+AudioConnection p6(amp6, 0, peak6, 0);
+AudioConnection p7(amp7, 0, peak7, 0);
+AudioConnection p8(amp8, 0, peak8, 0);
+
+// Also connect 2 of the amps to an I2S output (Pin 8)
+// to be able to listen to the sound.
+AudioConnection c10(amp1, 0, audioOutput, 0);
+AudioConnection c11(amp2, 0, audioOutput, 1);
+AudioControlSGTL5000 audioShield;
+
+
+void setup() {
+  AudioMemory(26);
+  audioShield.enable();
+  audioShield.inputSelect(myInput);
+  audioShield.micGain(12);
+  audioShield.volume(0.5);
+  const float microphoneAmplification = 72.0;
+  amp1.gain(microphoneAmplification);
+  amp2.gain(microphoneAmplification);
+  amp3.gain(microphoneAmplification);
+  amp4.gain(microphoneAmplification);
+  amp5.gain(microphoneAmplification);
+  amp6.gain(microphoneAmplification);
+  amp7.gain(microphoneAmplification);
+  amp8.gain(microphoneAmplification);
+  Serial.begin(9600);
+}
+
+elapsedMillis fps;
+
+void loop() {
+  if (fps > 24) {
+    fps = 0;
+    const int digits = 8;
+    print_bar(1, rms1.read(), peak1.readPeakToPeak()/2, digits);
+    print_bar(2, rms2.read(), peak2.readPeakToPeak()/2, digits);
+    print_bar(3, rms3.read(), peak3.readPeakToPeak()/2, digits);
+    print_bar(4, rms4.read(), peak4.readPeakToPeak()/2, digits);
+    print_bar(5, rms5.read(), peak5.readPeakToPeak()/2, digits);
+    print_bar(6, rms6.read(), peak6.readPeakToPeak()/2, digits);
+    print_bar(7, rms7.read(), peak7.readPeakToPeak()/2, digits);
+    print_bar(8, rms8.read(), peak8.readPeakToPeak()/2, digits);
+    Serial.println();
+  }
+}
+
+void print_bar(int in, float rms, float peak, int digits) {  
+  Serial.print(in);
+  Serial.print(":");
+  
+  int num_rms = roundf(rms * digits);
+  int num_peak = roundf(peak * digits);
+  
+  for (int i=0; i < digits; i++) {
+    if (i < num_rms) {
+      Serial.print("*");
+    } else if (i < num_peak) {
+      Serial.print(">");
+    } else {
+      Serial.print(" ");
+    }
+  }
+  Serial.print(" ");
+}