// Dial Tone (DTMF) decoding example. // // The audio with dial tones is connected to analog input A0, // without using the audio shield. See the "DialTone_DTMF" // example for using the audio shield. #include #include #include #include // Create the Audio components. These should be created in the // order data flows, inputs/sources -> processing -> outputs // AudioInputAnalog audioIn(A0); AudioAnalyzeToneDetect row1; // 7 tone detectors are needed AudioAnalyzeToneDetect row2; // to receive DTMF dial tones AudioAnalyzeToneDetect row3; AudioAnalyzeToneDetect row4; AudioAnalyzeToneDetect column1; AudioAnalyzeToneDetect column2; AudioAnalyzeToneDetect column3; // Create Audio connections between the components // AudioConnection c01(audioIn, 0, row1, 0); AudioConnection c02(audioIn, 0, row2, 0); AudioConnection c03(audioIn, 0, row3, 0); AudioConnection c04(audioIn, 0, row4, 0); AudioConnection c05(audioIn, 0, column1, 0); AudioConnection c06(audioIn, 0, column2, 0); AudioConnection c07(audioIn, 0, column3, 0); // pins where the 7 segment LEDs are connected const int sevenseg_a = 17; // aaa const int sevenseg_b = 9; // f b const int sevenseg_c = 11; // f b const int sevenseg_d = 12; // ggg const int sevenseg_e = 15; // e c const int sevenseg_f = 16; // e c const int sevenseg_g = 10; // ddd void setup() { // Audio connections require memory to work. For more // detailed information, see the MemoryAndCpuUsage example AudioMemory(3); //while (!Serial) ; //delay(100); // Configure the tone detectors with the frequency and number // of cycles to match. These numbers were picked for match // times of approx 30 ms. Longer times are more precise. row1.frequency(697, 21); row2.frequency(770, 23); row3.frequency(852, 25); row4.frequency(941, 28); column1.frequency(1209, 36); column2.frequency(1336, 40); column3.frequency(1477, 44); // The 7 segment display is "common anode), where the // common pin connects to +3.3V. LOW turns the LED on // and HIGH turns the LED off. If you use a common // cathode display, you will need to change all the HIGH // to LOW and LOW to HIGH. pinMode(sevenseg_a, OUTPUT); pinMode(sevenseg_b, OUTPUT); pinMode(sevenseg_c, OUTPUT); pinMode(sevenseg_d, OUTPUT); pinMode(sevenseg_e, OUTPUT); pinMode(sevenseg_f, OUTPUT); pinMode(sevenseg_g, OUTPUT); digitalWrite(sevenseg_a, HIGH); digitalWrite(sevenseg_b, HIGH); digitalWrite(sevenseg_c, HIGH); digitalWrite(sevenseg_d, HIGH); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, HIGH); digitalWrite(sevenseg_g, HIGH); } const float row_threshold = 0.2; const float column_threshold = 0.2; void loop() { float r1, r2, r3, r4, c1, c2, c3; char digit=0; // read all seven tone detectors r1 = row1.read(); r2 = row2.read(); r3 = row3.read(); r4 = row4.read(); c1 = column1.read(); c2 = column2.read(); c3 = column3.read(); // print the raw data, for troubleshooting Serial.print("tones: "); Serial.print(r1); Serial.print(", "); Serial.print(r2); Serial.print(", "); Serial.print(r3); Serial.print(", "); Serial.print(r4); Serial.print(", "); Serial.print(c1); Serial.print(", "); Serial.print(c2); Serial.print(", "); Serial.print(c3); // check all 12 combinations for key press if (r1 >= row_threshold) { if (c1 > column_threshold) { digit = '1'; digitalWrite(sevenseg_a, HIGH); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, HIGH); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, HIGH); digitalWrite(sevenseg_g, HIGH); } else if (c2 > column_threshold) { digit = '2'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, HIGH); digitalWrite(sevenseg_d, LOW); digitalWrite(sevenseg_e, LOW); digitalWrite(sevenseg_f, HIGH); digitalWrite(sevenseg_g, LOW); } else if (c3 > column_threshold) { digit = '3'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, LOW); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, HIGH); digitalWrite(sevenseg_g, LOW); } } else if (r2 >= row_threshold) { if (c1 > column_threshold) { digit = '4'; digitalWrite(sevenseg_a, HIGH); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, HIGH); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, LOW); digitalWrite(sevenseg_g, LOW); } else if (c2 > column_threshold) { digit = '5'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, HIGH); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, LOW); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, LOW); digitalWrite(sevenseg_g, LOW); } else if (c3 > column_threshold) { digit = '6'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, HIGH); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, LOW); digitalWrite(sevenseg_e, LOW); digitalWrite(sevenseg_f, LOW); digitalWrite(sevenseg_g, LOW); } } else if (r3 >= row_threshold) { if (c1 > column_threshold) { digit = '7'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, HIGH); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, HIGH); digitalWrite(sevenseg_g, HIGH); } else if (c2 > column_threshold) { digit = '8'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, LOW); digitalWrite(sevenseg_e, LOW); digitalWrite(sevenseg_f, LOW); digitalWrite(sevenseg_g, LOW); } else if (c3 > column_threshold) { digit = '9'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, LOW); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, LOW); digitalWrite(sevenseg_g, LOW); } } else if (r4 >= row_threshold) { if (c1 > column_threshold) { digit = '*'; digitalWrite(sevenseg_a, HIGH); digitalWrite(sevenseg_b, HIGH); digitalWrite(sevenseg_c, HIGH); digitalWrite(sevenseg_d, HIGH); digitalWrite(sevenseg_e, HIGH); digitalWrite(sevenseg_f, HIGH); digitalWrite(sevenseg_g, LOW); } else if (c2 > column_threshold) { digit = '0'; digitalWrite(sevenseg_a, LOW); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, LOW); digitalWrite(sevenseg_e, LOW); digitalWrite(sevenseg_f, LOW); digitalWrite(sevenseg_g, HIGH); } else if (c3 > column_threshold) { digit = '#'; digitalWrite(sevenseg_a, HIGH); digitalWrite(sevenseg_b, LOW); digitalWrite(sevenseg_c, LOW); digitalWrite(sevenseg_d, HIGH); digitalWrite(sevenseg_e, LOW); digitalWrite(sevenseg_f, LOW); digitalWrite(sevenseg_g, LOW); } } // print the key, if any found if (digit > 0) { Serial.print(" --> Key: "); Serial.print(digit); } Serial.println(); // uncomment these lines to see how much CPU time // the tone detectors and audio library are using //Serial.print("CPU="); //Serial.print(AudioProcessorUsage()); //Serial.print("%, max="); //Serial.print(AudioProcessorUsageMax()); //Serial.print("% "); delay(25); }