/* Audio Library for Teensy 3.X * Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com * * Development of this audio library was funded by PJRC.COM, LLC by sales of * Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop * open source software by purchasing Teensy or other PJRC products. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice, development funding notice, and this permission * notice shall be included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "output_i2s.h" #include "memcpy_audio.h" audio_block_t * AudioOutputI2S::block_left_1st = NULL; audio_block_t * AudioOutputI2S::block_right_1st = NULL; audio_block_t * AudioOutputI2S::block_left_2nd = NULL; audio_block_t * AudioOutputI2S::block_right_2nd = NULL; uint16_t AudioOutputI2S::block_left_offset = 0; uint16_t AudioOutputI2S::block_right_offset = 0; bool AudioOutputI2S::update_responsibility = false; DMAMEM static uint32_t i2s_tx_buffer[AUDIO_BLOCK_SAMPLES]; DMAChannel AudioOutputI2S::dma(false); void AudioOutputI2S::begin(void) { dma.begin(true); // Allocate the DMA channel first block_left_1st = NULL; block_right_1st = NULL; // TODO: should we set & clear the I2S_TCSR_SR bit here? config_i2s(); CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0 #if defined(KINETISK) dma.TCD->SADDR = i2s_tx_buffer; dma.TCD->SOFF = 2; dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1); dma.TCD->NBYTES_MLNO = 2; dma.TCD->SLAST = -sizeof(i2s_tx_buffer); dma.TCD->DADDR = &I2S0_TDR0; dma.TCD->DOFF = 0; dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2; dma.TCD->DLASTSGA = 0; dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2; dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR; #endif dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX); update_responsibility = update_setup(); dma.enable(); I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE | I2S_TCSR_FR; dma.attachInterrupt(isr); } void AudioOutputI2S::isr(void) { #if defined(KINETISK) int16_t *dest; audio_block_t *blockL, *blockR; uint32_t saddr, offsetL, offsetR; saddr = (uint32_t)(dma.TCD->SADDR); dma.clearInterrupt(); if (saddr < (uint32_t)i2s_tx_buffer + sizeof(i2s_tx_buffer) / 2) { // DMA is transmitting the first half of the buffer // so we must fill the second half dest = (int16_t *)&i2s_tx_buffer[AUDIO_BLOCK_SAMPLES/2]; if (AudioOutputI2S::update_responsibility) AudioStream::update_all(); } else { // DMA is transmitting the second half of the buffer // so we must fill the first half dest = (int16_t *)i2s_tx_buffer; } blockL = AudioOutputI2S::block_left_1st; blockR = AudioOutputI2S::block_right_1st; offsetL = AudioOutputI2S::block_left_offset; offsetR = AudioOutputI2S::block_right_offset; if (blockL && blockR) { memcpy_tointerleaveLR(dest, blockL->data + offsetL, blockR->data + offsetR); offsetL += AUDIO_BLOCK_SAMPLES / 2; offsetR += AUDIO_BLOCK_SAMPLES / 2; } else if (blockL) { memcpy_tointerleaveL(dest, blockL->data + offsetL); offsetL += AUDIO_BLOCK_SAMPLES / 2; } else if (blockR) { memcpy_tointerleaveR(dest, blockR->data + offsetR); offsetR += AUDIO_BLOCK_SAMPLES / 2; } else { memset(dest,0,AUDIO_BLOCK_SAMPLES * 2); return; } if (offsetL < AUDIO_BLOCK_SAMPLES) { AudioOutputI2S::block_left_offset = offsetL; } else { AudioOutputI2S::block_left_offset = 0; AudioStream::release(blockL); AudioOutputI2S::block_left_1st = AudioOutputI2S::block_left_2nd; AudioOutputI2S::block_left_2nd = NULL; } if (offsetR < AUDIO_BLOCK_SAMPLES) { AudioOutputI2S::block_right_offset = offsetR; } else { AudioOutputI2S::block_right_offset = 0; AudioStream::release(blockR); AudioOutputI2S::block_right_1st = AudioOutputI2S::block_right_2nd; AudioOutputI2S::block_right_2nd = NULL; } #else const int16_t *src, *end; int16_t *dest; audio_block_t *block; uint32_t saddr, offset; saddr = (uint32_t)(dma.CFG->SAR); dma.clearInterrupt(); if (saddr < (uint32_t)i2s_tx_buffer + sizeof(i2s_tx_buffer) / 2) { // DMA is transmitting the first half of the buffer // so we must fill the second half dest = (int16_t *)&i2s_tx_buffer[AUDIO_BLOCK_SAMPLES/2]; end = (int16_t *)&i2s_tx_buffer[AUDIO_BLOCK_SAMPLES]; if (AudioOutputI2S::update_responsibility) AudioStream::update_all(); } else { // DMA is transmitting the second half of the buffer // so we must fill the first half dest = (int16_t *)i2s_tx_buffer; end = (int16_t *)&i2s_tx_buffer[AUDIO_BLOCK_SAMPLES/2]; } block = AudioOutputI2S::block_left_1st; if (block) { offset = AudioOutputI2S::block_left_offset; src = &block->data[offset]; do { *dest = *src++; dest += 2; } while (dest < end); offset += AUDIO_BLOCK_SAMPLES/2; if (offset < AUDIO_BLOCK_SAMPLES) { AudioOutputI2S::block_left_offset = offset; } else { AudioOutputI2S::block_left_offset = 0; AudioStream::release(block); AudioOutputI2S::block_left_1st = AudioOutputI2S::block_left_2nd; AudioOutputI2S::block_left_2nd = NULL; } } else { do { *dest = 0; dest += 2; } while (dest < end); } dest -= AUDIO_BLOCK_SAMPLES - 1; block = AudioOutputI2S::block_right_1st; if (block) { offset = AudioOutputI2S::block_right_offset; src = &block->data[offset]; do { *dest = *src++; dest += 2; } while (dest < end); offset += AUDIO_BLOCK_SAMPLES/2; if (offset < AUDIO_BLOCK_SAMPLES) { AudioOutputI2S::block_right_offset = offset; } else { AudioOutputI2S::block_right_offset = 0; AudioStream::release(block); AudioOutputI2S::block_right_1st = AudioOutputI2S::block_right_2nd; AudioOutputI2S::block_right_2nd = NULL; } } else { do { *dest = 0; dest += 2; } while (dest < end); } #endif } void AudioOutputI2S::update(void) { // null audio device: discard all incoming data //if (!active) return; //audio_block_t *block = receiveReadOnly(); //if (block) release(block); audio_block_t *block; block = receiveReadOnly(0); // input 0 = left channel if (block) { __disable_irq(); if (block_left_1st == NULL) { block_left_1st = block; block_left_offset = 0; __enable_irq(); } else if (block_left_2nd == NULL) { block_left_2nd = block; __enable_irq(); } else { audio_block_t *tmp = block_left_1st; block_left_1st = block_left_2nd; block_left_2nd = block; block_left_offset = 0; __enable_irq(); release(tmp); } } block = receiveReadOnly(1); // input 1 = right channel if (block) { __disable_irq(); if (block_right_1st == NULL) { block_right_1st = block; block_right_offset = 0; __enable_irq(); } else if (block_right_2nd == NULL) { block_right_2nd = block; __enable_irq(); } else { audio_block_t *tmp = block_right_1st; block_right_1st = block_right_2nd; block_right_2nd = block; block_right_offset = 0; __enable_irq(); release(tmp); } } } // MCLK needs to be 48e6 / 1088 * 256 = 11.29411765 MHz -> 44.117647 kHz sample rate // #if F_CPU == 96000000 || F_CPU == 48000000 || F_CPU == 24000000 // PLL is at 96 MHz in these modes #define MCLK_MULT 2 #define MCLK_DIV 17 #elif F_CPU == 72000000 #define MCLK_MULT 8 #define MCLK_DIV 51 #elif F_CPU == 120000000 #define MCLK_MULT 8 #define MCLK_DIV 85 #elif F_CPU == 144000000 #define MCLK_MULT 4 #define MCLK_DIV 51 #elif F_CPU == 168000000 #define MCLK_MULT 8 #define MCLK_DIV 119 #elif F_CPU == 180000000 #define MCLK_MULT 16 #define MCLK_DIV 255 #elif F_CPU == 192000000 #define MCLK_MULT 1 #define MCLK_DIV 17 #elif F_CPU == 16000000 #define MCLK_MULT 12 #define MCLK_DIV 17 #else #error "This CPU Clock Speed is not supported by the Audio library"; #endif #if F_CPU >= 20000000 #define MCLK_SRC 3 // the PLL #else #define MCLK_SRC 0 // system clock #endif void AudioOutputI2S::config_i2s(void) { SIM_SCGC6 |= SIM_SCGC6_I2S; SIM_SCGC7 |= SIM_SCGC7_DMA; SIM_SCGC6 |= SIM_SCGC6_DMAMUX; // if either transmitter or receiver is enabled, do nothing if (I2S0_TCSR & I2S_TCSR_TE) return; if (I2S0_RCSR & I2S_RCSR_RE) return; // enable MCLK output I2S0_MCR = I2S_MCR_MICS(MCLK_SRC) | I2S_MCR_MOE; I2S0_MDR = I2S_MDR_FRACT((MCLK_MULT-1)) | I2S_MDR_DIVIDE((MCLK_DIV-1)); // configure transmitter I2S0_TMR = 0; I2S0_TCR1 = I2S_TCR1_TFW(1); // watermark at half fifo size I2S0_TCR2 = I2S_TCR2_SYNC(0) | I2S_TCR2_BCP | I2S_TCR2_MSEL(1) | I2S_TCR2_BCD | I2S_TCR2_DIV(3); I2S0_TCR3 = I2S_TCR3_TCE; I2S0_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(15) | I2S_TCR4_MF | I2S_TCR4_FSE | I2S_TCR4_FSP | I2S_TCR4_FSD; I2S0_TCR5 = I2S_TCR5_WNW(15) | I2S_TCR5_W0W(15) | I2S_TCR5_FBT(15); // configure receiver (sync'd to transmitter clocks) I2S0_RMR = 0; I2S0_RCR1 = I2S_RCR1_RFW(1); I2S0_RCR2 = I2S_RCR2_SYNC(1) | I2S_TCR2_BCP | I2S_RCR2_MSEL(1) | I2S_RCR2_BCD | I2S_RCR2_DIV(3); I2S0_RCR3 = I2S_RCR3_RCE; I2S0_RCR4 = I2S_RCR4_FRSZ(1) | I2S_RCR4_SYWD(15) | I2S_RCR4_MF | I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD; I2S0_RCR5 = I2S_RCR5_WNW(15) | I2S_RCR5_W0W(15) | I2S_RCR5_FBT(15); // configure pin mux for 3 clock signals CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK) CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK } /******************************************************************/ void AudioOutputI2Sslave::begin(void) { dma.begin(true); // Allocate the DMA channel first //pinMode(2, OUTPUT); block_left_1st = NULL; block_right_1st = NULL; AudioOutputI2Sslave::config_i2s(); CORE_PIN22_CONFIG = PORT_PCR_MUX(6); // pin 22, PTC1, I2S0_TXD0 #if defined(KINETISK) dma.TCD->SADDR = i2s_tx_buffer; dma.TCD->SOFF = 2; dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1); dma.TCD->NBYTES_MLNO = 2; dma.TCD->SLAST = -sizeof(i2s_tx_buffer); dma.TCD->DADDR = &I2S0_TDR0; dma.TCD->DOFF = 0; dma.TCD->CITER_ELINKNO = sizeof(i2s_tx_buffer) / 2; dma.TCD->DLASTSGA = 0; dma.TCD->BITER_ELINKNO = sizeof(i2s_tx_buffer) / 2; dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR; #endif dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_TX); update_responsibility = update_setup(); dma.enable(); I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE | I2S_TCSR_FR; dma.attachInterrupt(isr); } void AudioOutputI2Sslave::config_i2s(void) { SIM_SCGC6 |= SIM_SCGC6_I2S; SIM_SCGC7 |= SIM_SCGC7_DMA; SIM_SCGC6 |= SIM_SCGC6_DMAMUX; // if either transmitter or receiver is enabled, do nothing if (I2S0_TCSR & I2S_TCSR_TE) return; if (I2S0_RCSR & I2S_RCSR_RE) return; // Select input clock 0 // Configure to input the bit-clock from pin, bypasses the MCLK divider I2S0_MCR = I2S_MCR_MICS(0); I2S0_MDR = 0; // configure transmitter I2S0_TMR = 0; I2S0_TCR1 = I2S_TCR1_TFW(1); // watermark at half fifo size I2S0_TCR2 = I2S_TCR2_SYNC(0) | I2S_TCR2_BCP; I2S0_TCR3 = I2S_TCR3_TCE; I2S0_TCR4 = I2S_TCR4_FRSZ(1) | I2S_TCR4_SYWD(15) | I2S_TCR4_MF | I2S_TCR4_FSE | I2S_TCR4_FSP; I2S0_TCR5 = I2S_TCR5_WNW(15) | I2S_TCR5_W0W(15) | I2S_TCR5_FBT(15); // configure receiver (sync'd to transmitter clocks) I2S0_RMR = 0; I2S0_RCR1 = I2S_RCR1_RFW(1); I2S0_RCR2 = I2S_RCR2_SYNC(1) | I2S_TCR2_BCP; I2S0_RCR3 = I2S_RCR3_RCE; I2S0_RCR4 = I2S_RCR4_FRSZ(1) | I2S_RCR4_SYWD(15) | I2S_RCR4_MF | I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD; I2S0_RCR5 = I2S_RCR5_WNW(15) | I2S_RCR5_W0W(15) | I2S_RCR5_FBT(15); // configure pin mux for 3 clock signals CORE_PIN23_CONFIG = PORT_PCR_MUX(6); // pin 23, PTC2, I2S0_TX_FS (LRCLK) CORE_PIN9_CONFIG = PORT_PCR_MUX(6); // pin 9, PTC3, I2S0_TX_BCLK CORE_PIN11_CONFIG = PORT_PCR_MUX(6); // pin 11, PTC6, I2S0_MCLK }