|
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155 |
- /* Teensyduino Core Library
- * http://www.pjrc.com/teensy/
- * Copyright (c) 2017 PJRC.COM, LLC.
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * 1. The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * 2. If the Software is incorporated into a build system that allows
- * selection among a list of target devices, then similar target
- * devices manufactured by PJRC.COM must be included in the list of
- * target devices and selectable in the same manner.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
- #include "core_pins.h"
- #include "pins_arduino.h"
- #include "HardwareSerial.h"
- #include "IntervalTimer.h"
-
- // IntervalTimer based tone. This allows tone() to share the timers with other
- // libraries, rather than permanently hogging one PIT timer even for projects
- // which never use tone(). Someday this single-tone implementation might be
- // changed to allow multiple simultaneous tones.
-
- static uint32_t tone_toggle_count;
- static volatile uint8_t *tone_reg;
- static uint8_t tone_pin=255;
- static float tone_usec=0.0;
- static uint32_t tone_new_count=0;
- IntervalTimer tone_timer;
-
- void tone_interrupt(void);
-
- #if defined(KINETISK)
- #define TONE_CLEAR_PIN tone_reg[0] = 1
- #define TONE_TOGGLE_PIN tone_reg[128] = 1
- #define TONE_OUTPUT_PIN tone_reg[384] = 1
-
- #elif defined(KINETISL)
- static uint8_t tone_mask;
- #define TONE_CLEAR_PIN tone_reg[0] = tone_mask
- #define TONE_TOGGLE_PIN tone_reg[4] = tone_mask
- #define TONE_OUTPUT_PIN __disable_irq(); tone_reg[12] |= tone_mask; __enable_irq()
-
- #endif
-
- void tone(uint8_t pin, uint16_t frequency, uint32_t duration)
- {
- uint32_t count;
- volatile uint32_t *config;
- float usec;
-
- if (pin >= CORE_NUM_DIGITAL) return;
- if (duration) {
- count = (frequency * duration / 1000) * 2;
- if (!(count & 1)) count++; // always full waveform cycles
- } else {
- count = 0xFFFFFFFD;
- }
- if (frequency < 1) frequency = 1; // minimum is 1 Hz
- usec = (float)500000.0 / (float)frequency;
- config = portConfigRegister(pin);
-
- // TODO: IntervalTimer really needs an API to disable and enable
- // the interrupt on a single timer.
- __disable_irq();
- if (pin == tone_pin) {
- // changing a pin which is already playing a tone
- if (usec == tone_usec) {
- // same frequency, so just change the duration
- tone_toggle_count = (tone_toggle_count & 1) + count - 1;
- } else {
- // different frequency, reduce duration to only the
- // remainder of its current cycle, and configure for
- // the transition to the new frequency when the
- // current cycle completes
- tone_usec = usec;
- tone_new_count = count;
- tone_toggle_count = (tone_toggle_count & 1);
- }
- } else {
- // if playing on a different pin, immediately stop, even mid-cycle :-(
- if (tone_pin < CORE_NUM_DIGITAL) {
- TONE_CLEAR_PIN; // clear pin
- }
- // configure the new tone to play
- tone_pin = pin;
- tone_reg = portClearRegister(pin);
- #if defined(KINETISL)
- tone_mask = digitalPinToBitMask(pin);
- #endif
- TONE_CLEAR_PIN; // clear pin
- TONE_OUTPUT_PIN; // output mode;
- *config = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
- tone_toggle_count = count;
- tone_usec = usec;
- tone_timer.begin(tone_interrupt, usec);
- }
- __enable_irq();
- }
-
-
- void tone_interrupt(void)
- {
- if (tone_toggle_count) { // odd = rising edge, even = falling edge
- // not the end
- TONE_TOGGLE_PIN; // toggle
- tone_toggle_count--;
- if (tone_toggle_count == 0xFFFFFFFB) tone_toggle_count = 0xFFFFFFFD;
- } else {
- // this transition completes the tone
- TONE_CLEAR_PIN; // clear
- if (tone_new_count > 0) {
- // begin playing a new tone
- tone_timer.begin(tone_interrupt, tone_usec);
- tone_toggle_count = tone_new_count;
- tone_new_count = 0;
- } else {
- // finished playing
- tone_timer.end();
- tone_pin = 255;
- }
- }
- }
-
- void noTone(uint8_t pin)
- {
- if (pin >= CORE_NUM_DIGITAL) return;
- __disable_irq();
- if (pin == tone_pin) {
- tone_timer.end();
- TONE_CLEAR_PIN; // clear
- tone_pin = 255;
- }
- __enable_irq();
- }
-
-
-
|