Teensy 4.1 core updated for C++20
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

пре 11 година
пре 11 година
пре 11 година
пре 11 година
пре 11 година
пре 11 година
пре 10 година
пре 11 година
пре 11 година
пре 11 година
пре 11 година
пре 11 година
пре 11 година
пре 11 година
пре 10 година
пре 11 година
пре 11 година
пре 10 година
пре 11 година
пре 11 година
пре 10 година
пре 11 година
пре 10 година
пре 11 година
пре 10 година
пре 11 година
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152
  1. /* Teensyduino Core Library
  2. * http://www.pjrc.com/teensy/
  3. * Copyright (c) 2017 PJRC.COM, LLC.
  4. *
  5. * Permission is hereby granted, free of charge, to any person obtaining
  6. * a copy of this software and associated documentation files (the
  7. * "Software"), to deal in the Software without restriction, including
  8. * without limitation the rights to use, copy, modify, merge, publish,
  9. * distribute, sublicense, and/or sell copies of the Software, and to
  10. * permit persons to whom the Software is furnished to do so, subject to
  11. * the following conditions:
  12. *
  13. * 1. The above copyright notice and this permission notice shall be
  14. * included in all copies or substantial portions of the Software.
  15. *
  16. * 2. If the Software is incorporated into a build system that allows
  17. * selection among a list of target devices, then similar target
  18. * devices manufactured by PJRC.COM must be included in the list of
  19. * target devices and selectable in the same manner.
  20. *
  21. * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  22. * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  23. * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  24. * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  25. * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  26. * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  27. * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  28. * SOFTWARE.
  29. */
  30. #include <Arduino.h>
  31. // IntervalTimer based tone. This allows tone() to share the timers with other
  32. // libraries, rather than permanently hogging one PIT timer even for projects
  33. // which never use tone(). Someday this single-tone implementation might be
  34. // changed to allow multiple simultaneous tones.
  35. static uint32_t tone_toggle_count;
  36. static volatile uint8_t *tone_reg;
  37. static uint8_t tone_pin=255;
  38. static float tone_usec=0.0;
  39. static uint32_t tone_new_count=0;
  40. IntervalTimer tone_timer;
  41. void tone_interrupt(void);
  42. #if defined(KINETISK)
  43. #define TONE_CLEAR_PIN tone_reg[0] = 1
  44. #define TONE_TOGGLE_PIN tone_reg[128] = 1
  45. #define TONE_OUTPUT_PIN tone_reg[384] = 1
  46. #elif defined(KINETISL)
  47. static uint8_t tone_mask;
  48. #define TONE_CLEAR_PIN tone_reg[0] = tone_mask
  49. #define TONE_TOGGLE_PIN tone_reg[4] = tone_mask
  50. #define TONE_OUTPUT_PIN __disable_irq(); tone_reg[12] |= tone_mask; __enable_irq()
  51. #endif
  52. void tone(uint8_t pin, uint16_t frequency, uint32_t duration)
  53. {
  54. uint32_t count;
  55. volatile uint32_t *config;
  56. float usec;
  57. if (pin >= CORE_NUM_DIGITAL) return;
  58. if (duration) {
  59. count = (frequency * duration / 1000) * 2;
  60. if (!(count & 1)) count++; // always full waveform cycles
  61. } else {
  62. count = 0xFFFFFFFD;
  63. }
  64. if (frequency < 1) frequency = 1; // minimum is 1 Hz
  65. usec = (float)500000.0 / (float)frequency;
  66. config = portConfigRegister(pin);
  67. // TODO: IntervalTimer really needs an API to disable and enable
  68. // the interrupt on a single timer.
  69. __disable_irq();
  70. if (pin == tone_pin) {
  71. // changing a pin which is already playing a tone
  72. if (usec == tone_usec) {
  73. // same frequency, so just change the duration
  74. tone_toggle_count = (tone_toggle_count & 1) + count - 1;
  75. } else {
  76. // different frequency, reduce duration to only the
  77. // remainder of its current cycle, and configure for
  78. // the transition to the new frequency when the
  79. // current cycle completes
  80. tone_usec = usec;
  81. tone_new_count = count;
  82. tone_toggle_count = (tone_toggle_count & 1);
  83. }
  84. } else {
  85. // if playing on a different pin, immediately stop, even mid-cycle :-(
  86. if (tone_pin < CORE_NUM_DIGITAL) {
  87. TONE_CLEAR_PIN; // clear pin
  88. }
  89. // configure the new tone to play
  90. tone_pin = pin;
  91. tone_reg = portClearRegister(pin);
  92. #if defined(KINETISL)
  93. tone_mask = digitalPinToBitMask(pin);
  94. #endif
  95. TONE_CLEAR_PIN; // clear pin
  96. TONE_OUTPUT_PIN; // output mode;
  97. *config = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
  98. tone_toggle_count = count;
  99. tone_usec = usec;
  100. tone_timer.begin(tone_interrupt, usec);
  101. }
  102. __enable_irq();
  103. }
  104. void tone_interrupt(void)
  105. {
  106. if (tone_toggle_count) { // odd = rising edge, even = falling edge
  107. // not the end
  108. TONE_TOGGLE_PIN; // toggle
  109. tone_toggle_count--;
  110. if (tone_toggle_count == 0xFFFFFFFB) tone_toggle_count = 0xFFFFFFFD;
  111. } else {
  112. // this transition completes the tone
  113. TONE_CLEAR_PIN; // clear
  114. if (tone_new_count > 0) {
  115. // begin playing a new tone
  116. tone_timer.begin(tone_interrupt, tone_usec);
  117. tone_toggle_count = tone_new_count;
  118. tone_new_count = 0;
  119. } else {
  120. // finished playing
  121. tone_timer.end();
  122. tone_pin = 255;
  123. }
  124. }
  125. }
  126. void noTone(uint8_t pin)
  127. {
  128. if (pin >= CORE_NUM_DIGITAL) return;
  129. __disable_irq();
  130. if (pin == tone_pin) {
  131. tone_timer.end();
  132. TONE_CLEAR_PIN; // clear
  133. tone_pin = 255;
  134. }
  135. __enable_irq();
  136. }