visus
/
teensy-core-4.1
보기 1
좋아요 0
포크 0
코드 이슈 0 풀 리퀘스트 0 릴리즈 0 위키 Activity
소스 검색

UART registers based on struct

teensy4-core
PaulStoffregen 10 년 전
부모
530bfe5f83
커밋
86007ba815
1개의 변경된 파일과 284개의 추가작업 그리고 181개의 파일을 삭제
분할 보기 변경상태 보기
  1. +284
    -181
      teensy3/kinetis.h

+ 284
- 181
teensy3/kinetis.h 파일 보기

@@ -1932,7 +1932,7 @@ END_ENUM(IRQ_NUMBER_t)
#define USBDCD_TIMER2 (*(volatile uint32_t *)0x40035018) // TIMER2 register

// Chapter 43: SPI (DSPI)
typedef struct {
typedef struct __attribute__((packed)) {
volatile uint32_t MCR; // 0
volatile uint32_t unused1;// 4
volatile uint32_t TCR; // 8
@@ -2069,186 +2069,289 @@ typedef struct {
#define I2C1_SLTL (*(volatile uint8_t *)0x4006700B) // I2C SCL Low Timeout Register Low

// Chapter 45: Universal Asynchronous Receiver/Transmitter (UART)
#define UART0_BDH (*(volatile uint8_t *)0x4006A000) // UART Baud Rate Registers: High
#define UART0_BDL (*(volatile uint8_t *)0x4006A001) // UART Baud Rate Registers: Low
#define UART0_C1 (*(volatile uint8_t *)0x4006A002) // UART Control Register 1
#define UART_C1_LOOPS ((uint8_t)0x80) // When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input
#define UART_C1_UARTSWAI ((uint8_t)0x40) // UART Stops in Wait Mode
#define UART_C1_RSRC ((uint8_t)0x20) // When LOOPS is set, the RSRC field determines the source for the receiver shift register input
#define UART_C1_M ((uint8_t)0x10) // 9-bit or 8-bit Mode Select
#define UART_C1_WAKE ((uint8_t)0x08) // Determines which condition wakes the UART
#define UART_C1_ILT ((uint8_t)0x04) // Idle Line Type Select
#define UART_C1_PE ((uint8_t)0x02) // Parity Enable
#define UART_C1_PT ((uint8_t)0x01) // Parity Type, 0=even, 1=odd
#define UART0_C2 (*(volatile uint8_t *)0x4006A003) // UART Control Register 2
#define UART_C2_TIE ((uint8_t)0x80) // Transmitter Interrupt or DMA Transfer Enable.
#define UART_C2_TCIE ((uint8_t)0x40) // Transmission Complete Interrupt Enable
#define UART_C2_RIE ((uint8_t)0x20) // Receiver Full Interrupt or DMA Transfer Enable
#define UART_C2_ILIE ((uint8_t)0x10) // Idle Line Interrupt Enable
#define UART_C2_TE ((uint8_t)0x08) // Transmitter Enable
#define UART_C2_RE ((uint8_t)0x04) // Receiver Enable
#define UART_C2_RWU ((uint8_t)0x02) // Receiver Wakeup Control
#define UART_C2_SBK ((uint8_t)0x01) // Send Break
#define UART0_S1 (*(volatile uint8_t *)0x4006A004) // UART Status Register 1
#define UART_S1_TDRE ((uint8_t)0x80) // Transmit Data Register Empty Flag
#define UART_S1_TC ((uint8_t)0x40) // Transmit Complete Flag
#define UART_S1_RDRF ((uint8_t)0x20) // Receive Data Register Full Flag
#define UART_S1_IDLE ((uint8_t)0x10) // Idle Line Flag
#define UART_S1_OR ((uint8_t)0x08) // Receiver Overrun Flag
#define UART_S1_NF ((uint8_t)0x04) // Noise Flag
#define UART_S1_FE ((uint8_t)0x02) // Framing Error Flag
#define UART_S1_PF ((uint8_t)0x01) // Parity Error Flag
#define UART0_S2 (*(volatile uint8_t *)0x4006A005) // UART Status Register 2
#define UART0_C3 (*(volatile uint8_t *)0x4006A006) // UART Control Register 3
#define UART0_D (*(volatile uint8_t *)0x4006A007) // UART Data Register
#define UART0_MA1 (*(volatile uint8_t *)0x4006A008) // UART Match Address Registers 1
#define UART0_MA2 (*(volatile uint8_t *)0x4006A009) // UART Match Address Registers 2
#define UART0_C4 (*(volatile uint8_t *)0x4006A00A) // UART Control Register 4
#define UART0_C5 (*(volatile uint8_t *)0x4006A00B) // UART Control Register 5
#define UART0_ED (*(volatile uint8_t *)0x4006A00C) // UART Extended Data Register
#define UART0_MODEM (*(volatile uint8_t *)0x4006A00D) // UART Modem Register
#define UART0_IR (*(volatile uint8_t *)0x4006A00E) // UART Infrared Register
#define UART0_PFIFO (*(volatile uint8_t *)0x4006A010) // UART FIFO Parameters
#define UART_PFIFO_TXFE ((uint8_t)0x80) //
#define UART_PFIFO_RXFE ((uint8_t)0x08) //
#define UART0_CFIFO *(volatile uint8_t *)0x4006A011 // UART FIFO Control Register
#define UART_CFIFO_TXFLUSH ((uint8_t)0x80) //
#define UART_CFIFO_RXFLUSH ((uint8_t)0x40) //
#define UART_CFIFO_RXOFE ((uint8_t)0x04) //
#define UART_CFIFO_TXOFE ((uint8_t)0x02) //
#define UART_CFIFO_RXUFE ((uint8_t)0x01) //
#define UART0_SFIFO *(volatile uint8_t *)0x4006A012 // UART FIFO Status Register
#define UART_SFIFO_TXEMPT ((uint8_t)0x80) //
#define UART_SFIFO_RXEMPT ((uint8_t)0x40) //
#define UART_SFIFO_RXOF ((uint8_t)0x04) //
#define UART_SFIFO_TXOF ((uint8_t)0x02) //
#define UART_SFIFO_RXUF ((uint8_t)0x01) //
#define UART0_TWFIFO (*(volatile uint8_t *)0x4006A013) // UART FIFO Transmit Watermark
#define UART0_TCFIFO (*(volatile uint8_t *)0x4006A014) // UART FIFO Transmit Count
#define UART0_RWFIFO (*(volatile uint8_t *)0x4006A015) // UART FIFO Receive Watermark
#define UART0_RCFIFO (*(volatile uint8_t *)0x4006A016) // UART FIFO Receive Count
#define UART0_C7816 (*(volatile uint8_t *)0x4006A018) // UART 7816 Control Register
#define UART0_IE7816 (*(volatile uint8_t *)0x4006A019) // UART 7816 Interrupt Enable Register
#define UART0_IS7816 (*(volatile uint8_t *)0x4006A01A) // UART 7816 Interrupt Status Register
#define UART0_WP7816T0 (*(volatile uint8_t *)0x4006A01B) // UART 7816 Wait Parameter Register
#define UART0_WP7816T1 (*(volatile uint8_t *)0x4006A01B) // UART 7816 Wait Parameter Register
#define UART0_WN7816 (*(volatile uint8_t *)0x4006A01C) // UART 7816 Wait N Register
#define UART0_WF7816 (*(volatile uint8_t *)0x4006A01D) // UART 7816 Wait FD Register
#define UART0_ET7816 (*(volatile uint8_t *)0x4006A01E) // UART 7816 Error Threshold Register
#define UART0_TL7816 (*(volatile uint8_t *)0x4006A01F) // UART 7816 Transmit Length Register
#define UART0_C6 (*(volatile uint8_t *)0x4006A021) // UART CEA709.1-B Control Register 6
#define UART0_PCTH (*(volatile uint8_t *)0x4006A022) // UART CEA709.1-B Packet Cycle Time Counter High
#define UART0_PCTL (*(volatile uint8_t *)0x4006A023) // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART0_B1T (*(volatile uint8_t *)0x4006A024) // UART CEA709.1-B Beta1 Timer
#define UART0_SDTH (*(volatile uint8_t *)0x4006A025) // UART CEA709.1-B Secondary Delay Timer High
#define UART0_SDTL (*(volatile uint8_t *)0x4006A026) // UART CEA709.1-B Secondary Delay Timer Low
#define UART0_PRE (*(volatile uint8_t *)0x4006A027) // UART CEA709.1-B Preamble
#define UART0_TPL (*(volatile uint8_t *)0x4006A028) // UART CEA709.1-B Transmit Packet Length
#define UART0_IE (*(volatile uint8_t *)0x4006A029) // UART CEA709.1-B Interrupt Enable Register
#define UART0_WB (*(volatile uint8_t *)0x4006A02A) // UART CEA709.1-B WBASE
#define UART0_S3 (*(volatile uint8_t *)0x4006A02B) // UART CEA709.1-B Status Register
#define UART0_S4 (*(volatile uint8_t *)0x4006A02C) // UART CEA709.1-B Status Register
#define UART0_RPL (*(volatile uint8_t *)0x4006A02D) // UART CEA709.1-B Received Packet Length
#define UART0_RPREL (*(volatile uint8_t *)0x4006A02E) // UART CEA709.1-B Received Preamble Length
#define UART0_CPW (*(volatile uint8_t *)0x4006A02F) // UART CEA709.1-B Collision Pulse Width
#define UART0_RIDT (*(volatile uint8_t *)0x4006A030) // UART CEA709.1-B Receive Indeterminate Time
#define UART0_TIDT (*(volatile uint8_t *)0x4006A031) // UART CEA709.1-B Transmit Indeterminate Time
#define UART1_BDH (*(volatile uint8_t *)0x4006B000) // UART Baud Rate Registers: High
#define UART1_BDL (*(volatile uint8_t *)0x4006B001) // UART Baud Rate Registers: Low
#define UART1_C1 (*(volatile uint8_t *)0x4006B002) // UART Control Register 1
#define UART1_C2 (*(volatile uint8_t *)0x4006B003) // UART Control Register 2
#define UART1_S1 (*(volatile uint8_t *)0x4006B004) // UART Status Register 1
#define UART1_S2 (*(volatile uint8_t *)0x4006B005) // UART Status Register 2
#define UART1_C3 (*(volatile uint8_t *)0x4006B006) // UART Control Register 3
#define UART1_D (*(volatile uint8_t *)0x4006B007) // UART Data Register
#define UART1_MA1 (*(volatile uint8_t *)0x4006B008) // UART Match Address Registers 1
#define UART1_MA2 (*(volatile uint8_t *)0x4006B009) // UART Match Address Registers 2
#define UART1_C4 (*(volatile uint8_t *)0x4006B00A) // UART Control Register 4
#define UART1_C5 (*(volatile uint8_t *)0x4006B00B) // UART Control Register 5
#define UART1_ED (*(volatile uint8_t *)0x4006B00C) // UART Extended Data Register
#define UART1_MODEM (*(volatile uint8_t *)0x4006B00D) // UART Modem Register
#define UART1_IR (*(volatile uint8_t *)0x4006B00E) // UART Infrared Register
#define UART1_PFIFO (*(volatile uint8_t *)0x4006B010) // UART FIFO Parameters
#define UART1_CFIFO (*(volatile uint8_t *)0x4006B011) // UART FIFO Control Register
#define UART1_SFIFO (*(volatile uint8_t *)0x4006B012) // UART FIFO Status Register
#define UART1_TWFIFO (*(volatile uint8_t *)0x4006B013) // UART FIFO Transmit Watermark
#define UART1_TCFIFO (*(volatile uint8_t *)0x4006B014) // UART FIFO Transmit Count
#define UART1_RWFIFO (*(volatile uint8_t *)0x4006B015) // UART FIFO Receive Watermark
#define UART1_RCFIFO (*(volatile uint8_t *)0x4006B016) // UART FIFO Receive Count
#define UART1_C7816 (*(volatile uint8_t *)0x4006B018) // UART 7816 Control Register
#define UART1_IE7816 (*(volatile uint8_t *)0x4006B019) // UART 7816 Interrupt Enable Register
#define UART1_IS7816 (*(volatile uint8_t *)0x4006B01A) // UART 7816 Interrupt Status Register
#define UART1_WP7816T0 (*(volatile uint8_t *)0x4006B01B) // UART 7816 Wait Parameter Register
#define UART1_WP7816T1 (*(volatile uint8_t *)0x4006B01B) // UART 7816 Wait Parameter Register
#define UART1_WN7816 (*(volatile uint8_t *)0x4006B01C) // UART 7816 Wait N Register
#define UART1_WF7816 (*(volatile uint8_t *)0x4006B01D) // UART 7816 Wait FD Register
#define UART1_ET7816 (*(volatile uint8_t *)0x4006B01E) // UART 7816 Error Threshold Register
#define UART1_TL7816 (*(volatile uint8_t *)0x4006B01F) // UART 7816 Transmit Length Register
#define UART1_C6 (*(volatile uint8_t *)0x4006B021) // UART CEA709.1-B Control Register 6
#define UART1_PCTH (*(volatile uint8_t *)0x4006B022) // UART CEA709.1-B Packet Cycle Time Counter High
#define UART1_PCTL (*(volatile uint8_t *)0x4006B023) // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART1_B1T (*(volatile uint8_t *)0x4006B024) // UART CEA709.1-B Beta1 Timer
#define UART1_SDTH (*(volatile uint8_t *)0x4006B025) // UART CEA709.1-B Secondary Delay Timer High
#define UART1_SDTL (*(volatile uint8_t *)0x4006B026) // UART CEA709.1-B Secondary Delay Timer Low
#define UART1_PRE (*(volatile uint8_t *)0x4006B027) // UART CEA709.1-B Preamble
#define UART1_TPL (*(volatile uint8_t *)0x4006B028) // UART CEA709.1-B Transmit Packet Length
#define UART1_IE (*(volatile uint8_t *)0x4006B029) // UART CEA709.1-B Interrupt Enable Register
#define UART1_WB (*(volatile uint8_t *)0x4006B02A) // UART CEA709.1-B WBASE
#define UART1_S3 (*(volatile uint8_t *)0x4006B02B) // UART CEA709.1-B Status Register
#define UART1_S4 (*(volatile uint8_t *)0x4006B02C) // UART CEA709.1-B Status Register
#define UART1_RPL (*(volatile uint8_t *)0x4006B02D) // UART CEA709.1-B Received Packet Length
#define UART1_RPREL (*(volatile uint8_t *)0x4006B02E) // UART CEA709.1-B Received Preamble Length
#define UART1_CPW (*(volatile uint8_t *)0x4006B02F) // UART CEA709.1-B Collision Pulse Width
#define UART1_RIDT (*(volatile uint8_t *)0x4006B030) // UART CEA709.1-B Receive Indeterminate Time
#define UART1_TIDT (*(volatile uint8_t *)0x4006B031) // UART CEA709.1-B Transmit Indeterminate Time
#define UART2_BDH (*(volatile uint8_t *)0x4006C000) // UART Baud Rate Registers: High
#define UART2_BDL (*(volatile uint8_t *)0x4006C001) // UART Baud Rate Registers: Low
#define UART2_C1 (*(volatile uint8_t *)0x4006C002) // UART Control Register 1
#define UART2_C2 (*(volatile uint8_t *)0x4006C003) // UART Control Register 2
#define UART2_S1 (*(volatile uint8_t *)0x4006C004) // UART Status Register 1
#define UART2_S2 (*(volatile uint8_t *)0x4006C005) // UART Status Register 2
#define UART2_C3 (*(volatile uint8_t *)0x4006C006) // UART Control Register 3
#define UART2_D (*(volatile uint8_t *)0x4006C007) // UART Data Register
#define UART2_MA1 (*(volatile uint8_t *)0x4006C008) // UART Match Address Registers 1
#define UART2_MA2 (*(volatile uint8_t *)0x4006C009) // UART Match Address Registers 2
#define UART2_C4 (*(volatile uint8_t *)0x4006C00A) // UART Control Register 4
#define UART2_C5 (*(volatile uint8_t *)0x4006C00B) // UART Control Register 5
#define UART2_ED (*(volatile uint8_t *)0x4006C00C) // UART Extended Data Register
#define UART2_MODEM (*(volatile uint8_t *)0x4006C00D) // UART Modem Register
#define UART2_IR (*(volatile uint8_t *)0x4006C00E) // UART Infrared Register
#define UART2_PFIFO (*(volatile uint8_t *)0x4006C010) // UART FIFO Parameters
#define UART2_CFIFO (*(volatile uint8_t *)0x4006C011) // UART FIFO Control Register
#define UART2_SFIFO (*(volatile uint8_t *)0x4006C012) // UART FIFO Status Register
#define UART2_TWFIFO (*(volatile uint8_t *)0x4006C013) // UART FIFO Transmit Watermark
#define UART2_TCFIFO (*(volatile uint8_t *)0x4006C014) // UART FIFO Transmit Count
#define UART2_RWFIFO (*(volatile uint8_t *)0x4006C015) // UART FIFO Receive Watermark
#define UART2_RCFIFO (*(volatile uint8_t *)0x4006C016) // UART FIFO Receive Count
#define UART2_C7816 (*(volatile uint8_t *)0x4006C018) // UART 7816 Control Register
#define UART2_IE7816 (*(volatile uint8_t *)0x4006C019) // UART 7816 Interrupt Enable Register
#define UART2_IS7816 (*(volatile uint8_t *)0x4006C01A) // UART 7816 Interrupt Status Register
#define UART2_WP7816T0 (*(volatile uint8_t *)0x4006C01B) // UART 7816 Wait Parameter Register
#define UART2_WP7816T1 (*(volatile uint8_t *)0x4006C01B) // UART 7816 Wait Parameter Register
#define UART2_WN7816 (*(volatile uint8_t *)0x4006C01C) // UART 7816 Wait N Register
#define UART2_WF7816 (*(volatile uint8_t *)0x4006C01D) // UART 7816 Wait FD Register
#define UART2_ET7816 (*(volatile uint8_t *)0x4006C01E) // UART 7816 Error Threshold Register
#define UART2_TL7816 (*(volatile uint8_t *)0x4006C01F) // UART 7816 Transmit Length Register
#define UART2_C6 (*(volatile uint8_t *)0x4006C021) // UART CEA709.1-B Control Register 6
#define UART2_PCTH (*(volatile uint8_t *)0x4006C022) // UART CEA709.1-B Packet Cycle Time Counter High
#define UART2_PCTL (*(volatile uint8_t *)0x4006C023) // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART2_B1T (*(volatile uint8_t *)0x4006C024) // UART CEA709.1-B Beta1 Timer
#define UART2_SDTH (*(volatile uint8_t *)0x4006C025) // UART CEA709.1-B Secondary Delay Timer High
#define UART2_SDTL (*(volatile uint8_t *)0x4006C026) // UART CEA709.1-B Secondary Delay Timer Low
#define UART2_PRE (*(volatile uint8_t *)0x4006C027) // UART CEA709.1-B Preamble
#define UART2_TPL (*(volatile uint8_t *)0x4006C028) // UART CEA709.1-B Transmit Packet Length
#define UART2_IE (*(volatile uint8_t *)0x4006C029) // UART CEA709.1-B Interrupt Enable Register
#define UART2_WB (*(volatile uint8_t *)0x4006C02A) // UART CEA709.1-B WBASE
#define UART2_S3 (*(volatile uint8_t *)0x4006C02B) // UART CEA709.1-B Status Register
#define UART2_S4 (*(volatile uint8_t *)0x4006C02C) // UART CEA709.1-B Status Register
#define UART2_RPL (*(volatile uint8_t *)0x4006C02D) // UART CEA709.1-B Received Packet Length
#define UART2_RPREL (*(volatile uint8_t *)0x4006C02E) // UART CEA709.1-B Received Preamble Length
#define UART2_CPW (*(volatile uint8_t *)0x4006C02F) // UART CEA709.1-B Collision Pulse Width
#define UART2_RIDT (*(volatile uint8_t *)0x4006C030) // UART CEA709.1-B Receive Indeterminate Time
#define UART2_TIDT (*(volatile uint8_t *)0x4006C031) // UART CEA709.1-B Transmit Indeterminate Time
typedef struct __attribute__((packed)) {
volatile uint8_t BDH;
volatile uint8_t BDL;
volatile uint8_t C1;
volatile uint8_t C2;
volatile uint8_t S1;
volatile uint8_t S2;
volatile uint8_t C3;
volatile uint8_t D;
volatile uint8_t MA1;
volatile uint8_t MA2;
volatile uint8_t C4;
volatile uint8_t C5;
volatile uint8_t ED;
volatile uint8_t MODEM;
volatile uint8_t IR;
volatile uint8_t unused1;
volatile uint8_t PFIFO;
volatile uint8_t CFIFO;
volatile uint8_t SFIFO;
volatile uint8_t TWFIFO;
volatile uint8_t TCFIFO;
volatile uint8_t RWFIFO;
volatile uint8_t RCFIFO;
volatile uint8_t unused2;
volatile uint8_t C7816;
volatile uint8_t IE7816;
volatile uint8_t IS7816;
union { volatile uint8_t WP7816T0; volatile uint8_t WP7816T1; };
volatile uint8_t WN7816;
volatile uint8_t WF7816;
volatile uint8_t ET7816;
volatile uint8_t TL7816;
volatile uint8_t unused3;
volatile uint8_t C6;
volatile uint8_t PCTH;
volatile uint8_t PCTL;
volatile uint8_t B1T;
volatile uint8_t SDTH;
volatile uint8_t SDTL;
volatile uint8_t PRE;
volatile uint8_t TPL;
volatile uint8_t IE;
volatile uint8_t WB;
volatile uint8_t S3;
volatile uint8_t S4;
volatile uint8_t RPL;
volatile uint8_t RPREL;
volatile uint8_t CPW;
volatile uint8_t RIDT;
volatile uint8_t TIDT;
} KINETISK_UART_t;
#define UART0 (*(KINETISK_UART_t *)0x4006A000)
#define UART0_BDH (UART0.BDH) // UART Baud Rate Registers: High
#define UART0_BDL (UART0.BDL) // UART Baud Rate Registers: Low
#define UART0_C1 (UART0.C1) // UART Control Register 1
#define UART_C1_LOOPS 0x80 // When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input
#define UART_C1_UARTSWAI 0x40 // UART Stops in Wait Mode
#define UART_C1_RSRC 0x20 // When LOOPS is set, the RSRC field determines the source for the receiver shift register input
#define UART_C1_M 0x10 // 9-bit or 8-bit Mode Select
#define UART_C1_WAKE 0x08 // Determines which condition wakes the UART
#define UART_C1_ILT 0x04 // Idle Line Type Select
#define UART_C1_PE 0x02 // Parity Enable
#define UART_C1_PT 0x01 // Parity Type, 0=even, 1=odd
#define UART0_C2 (UART0.C2) // UART Control Register 2
#define UART_C2_TIE 0x80 // Transmitter Interrupt or DMA Transfer Enable.
#define UART_C2_TCIE 0x40 // Transmission Complete Interrupt Enable
#define UART_C2_RIE 0x20 // Receiver Full Interrupt or DMA Transfer Enable
#define UART_C2_ILIE 0x10 // Idle Line Interrupt Enable
#define UART_C2_TE 0x08 // Transmitter Enable
#define UART_C2_RE 0x04 // Receiver Enable
#define UART_C2_RWU 0x02 // Receiver Wakeup Control
#define UART_C2_SBK 0x01 // Send Break
#define UART0_S1 (UART0.S1) // UART Status Register 1
#define UART_S1_TDRE 0x80 // Transmit Data Register Empty Flag
#define UART_S1_TC 0x40 // Transmit Complete Flag
#define UART_S1_RDRF 0x20 // Receive Data Register Full Flag
#define UART_S1_IDLE 0x10 // Idle Line Flag
#define UART_S1_OR 0x08 // Receiver Overrun Flag
#define UART_S1_NF 0x04 // Noise Flag
#define UART_S1_FE 0x02 // Framing Error Flag
#define UART_S1_PF 0x01 // Parity Error Flag
#define UART0_S2 (UART0.S2) // UART Status Register 2
#define UART0_C3 (UART0.C3) // UART Control Register 3
#define UART0_D (UART0.D) // UART Data Register
#define UART0_MA1 (UART0.MA1) // UART Match Address Registers 1
#define UART0_MA2 (UART0.MA2) // UART Match Address Registers 2
#define UART0_C4 (UART0.C4) // UART Control Register 4
#define UART0_C5 (UART0.C5) // UART Control Register 5
#define UART0_ED (UART0.ED) // UART Extended Data Register
#define UART0_MODEM (UART0.MODEM) // UART Modem Register
#define UART0_IR (UART0.IR) // UART Infrared Register
#define UART0_PFIFO (UART0.PFIFO) // UART FIFO Parameters
#define UART_PFIFO_TXFE 0x80 // Transmit FIFO Enable
#define UART_PFIFO_TXFIFOSIZE(n) (((n) & 7) << 4) // Transmit FIFO Size, 0=1, 1=4, 2=8, 3=16, 4=32, 5=64, 6=128
#define UART_PFIFO_RXFE 0x08 // Receive FIFO Enable
#define UART_PFIFO_RXFIFOSIZE(n) (((n) & 7) << 0) // Transmit FIFO Size, 0=1, 1=4, 2=8, 3=16, 4=32, 5=64, 6=128
#define UART0_CFIFO (UART0.CFIFO) // UART FIFO Control Register
#define UART_CFIFO_TXFLUSH 0x80 // Transmit FIFO/Buffer Flush
#define UART_CFIFO_RXFLUSH 0x40 // Receive FIFO/Buffer Flush
#define UART_CFIFO_RXOFE 0x04 // Receive FIFO Overflow Interrupt Enable
#define UART_CFIFO_TXOFE 0x02 // Transmit FIFO Overflow Interrupt Enable
#define UART_CFIFO_RXUFE 0x01 // Receive FIFO Underflow Interrupt Enable
#define UART0_SFIFO (UART0.SFIFO) // UART FIFO Status Register
#define UART_SFIFO_TXEMPT 0x80 // Transmit Buffer/FIFO Empty
#define UART_SFIFO_RXEMPT 0x40 // Receive Buffer/FIFO Empty
#define UART_SFIFO_RXOF 0x04 // Receiver Buffer Overflow Flag
#define UART_SFIFO_TXOF 0x02 // Transmitter Buffer Overflow Flag
#define UART_SFIFO_RXUF 0x01 // Receiver Buffer Underflow Flag
#define UART0_TWFIFO (UART0.TWFIFO) // UART FIFO Transmit Watermark
#define UART0_TCFIFO (UART0.TCFIFO) // UART FIFO Transmit Count
#define UART0_RWFIFO (UART0.RWFIFO) // UART FIFO Receive Watermark
#define UART0_RCFIFO (UART0.RCFIFO) // UART FIFO Receive Count
#define UART0_C7816 (UART0.C7816) // UART 7816 Control Register
#define UART_C7816_ONACK 0x10 // Generate NACK on Overflow
#define UART_C7816_ANACK 0x08 // Generate NACK on Error
#define UART_C7816_INIT 0x04 // Detect Initial Character
#define UART_C7816_TTYPE 0x02 // Transfer Type
#define UART_C7816_ISO_7816E 0x01 // ISO-7816 Functionality Enabled
#define UART0_IE7816 (UART0.IE7816) // UART 7816 Interrupt Enable Register
#define UART_IE7816_WTE 0x80 // Wait Timer Interrupt Enable
#define UART_IE7816_CWTE 0x40 // Character Wait Timer Interrupt Enable
#define UART_IE7816_BWTE 0x20 // Block Wait Timer Interrupt Enable
#define UART_IE7816_INITDE 0x10 // Initial Character Detected Interrupt Enable
#define UART_IE7816_GTVE 0x04 // Guard Timer Violated Interrupt Enable
#define UART_IE7816_TXTE 0x02 // Transmit Threshold Exceeded Interrupt Enable
#define UART_IE7816_RXTE 0x01 // Receive Threshold Exceeded Interrupt Enable
#define UART0_IS7816 (UART0.IS7816) // UART 7816 Interrupt Status Register
#define UART_IS7816_WT 0x80 // Wait Timer Interrupt
#define UART_IS7816_CWT 0x40 // Character Wait Timer Interrupt
#define UART_IS7816_BWT 0x20 // Block Wait Timer Interrupt
#define UART_IS7816_INITD 0x10 // Initial Character Detected Interrupt
#define UART_IS7816_GTV 0x04 // Guard Timer Violated Interrupt
#define UART_IS7816_TXT 0x02 // Transmit Threshold Exceeded Interrupt
#define UART_IS7816_RXT 0x01 // Receive Threshold Exceeded Interrupt
#define UART0_WP7816T0 (UART0.WP7816T0) // UART 7816 Wait Parameter Register
#define UART0_WP7816T1 (UART0.WP7816T1) // UART 7816 Wait Parameter Register
#define UART_WP7816T1_CWI(n) (((n) & 15) << 4) // Character Wait Time Integer (C7816[TTYPE] = 1)
#define UART_WP7816T1_BWI(n) (((n) & 15) << 0) // Block Wait Time Integer(C7816[TTYPE] = 1)
#define UART0_WN7816 (UART0.WN7816) // UART 7816 Wait N Register
#define UART0_WF7816 (UART0.WF7816) // UART 7816 Wait FD Register
#define UART0_ET7816 (UART0.ET7816) // UART 7816 Error Threshold Register
#define UART_ET7816_TXTHRESHOLD(n) (((n) & 15) << 4) // Transmit NACK Threshold
#define UART_ET7816_RXTHRESHOLD(n) (((n) & 15) << 0) // Receive NACK Threshold
#define UART0_TL7816 (UART0.TL7816) // UART 7816 Transmit Length Register
#define UART0_C6 (UART0.C6) // UART CEA709.1-B Control Register 6
#define UART_C6_EN709 0x80 // Enables the CEA709.1-B feature.
#define UART_C6_TX709 0x40 // Starts CEA709.1-B transmission.
#define UART_C6_CE 0x20 // Collision Enable
#define UART_C6_CP 0x10 // Collision Signal Polarity
#define UART0_PCTH (UART0.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High
#define UART0_PCTL (UART0.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART0_B1T (UART0.B1T) // UART CEA709.1-B Beta1 Timer
#define UART0_SDTH (UART0.SDTH) // UART CEA709.1-B Secondary Delay Timer High
#define UART0_SDTL (UART0.SDTL) // UART CEA709.1-B Secondary Delay Timer Low
#define UART0_PRE (UART0.PRE) // UART CEA709.1-B Preamble
#define UART0_TPL (UART0.TPL) // UART CEA709.1-B Transmit Packet Length
#define UART0_IE (UART0.IE) // UART CEA709.1-B Interrupt Enable Register
#define UART_IE_WBEIE 0x40 // WBASE Expired Interrupt Enable
#define UART_IE_ISDIE 0x20 // Initial Sync Detection Interrupt Enable
#define UART_IE_PRXIE 0x10 // Packet Received Interrupt Enable
#define UART_IE_PTXIE 0x08 // Packet Transmitted Interrupt Enable
#define UART_IE_PCTEIE 0x04 // Packet Cycle Timer Interrupt Enable
#define UART_IE_PSIE 0x02 // Preamble Start Interrupt Enable
#define UART_IE_TXFIE 0x01 // Transmission Fail Interrupt Enable
#define UART0_WB (UART0.WB) // UART CEA709.1-B WBASE
#define UART0_S3 (UART0.S3) // UART CEA709.1-B Status Register
#define UART_S3_PEF 0x80 // Preamble Error Flag
#define UART_S3_WBEF 0x40 // Wbase Expired Flag
#define UART_S3_ISD 0x20 // Initial Sync Detect
#define UART_S3_PRXF 0x10 // Packet Received Flag
#define UART_S3_PTXF 0x08 // Packet Transmitted Flag
#define UART_S3_PCTEF 0x04 // Packet Cycle Timer Expired Flag
#define UART_S3_PSF 0x02 // Preamble Start Flag
#define UART_S3_TXFF 0x01 // Transmission Fail Flag
#define UART0_S4 (UART0.S4) // UART CEA709.1-B Status Register
#define UART_S4_INITF 0x10 // Initial Synchronization Fail Flag
#define UART_S4_CDET(n) (((n) & 3) << 2) // Indicates collision: 0=none, 1=preamble, 2=data, 3=line code violation
#define UART_S4_ILCV 0x02 // Improper Line Code Violation
#define UART_S4_FE 0x01 // Framing Error
#define UART0_RPL (UART0.RPL) // UART CEA709.1-B Received Packet Length
#define UART0_RPREL (UART0.RPREL) // UART CEA709.1-B Received Preamble Length
#define UART0_CPW (UART0.CPW) // UART CEA709.1-B Collision Pulse Width
#define UART0_RIDT (UART0.RIDT) // UART CEA709.1-B Receive Indeterminate Time
#define UART0_TIDT (UART0.TIDT) // UART CEA709.1-B Transmit Indeterminate Time
#define UART1 (*(KINETISK_UART_t *)0x4006B000)
#define UART1_BDH (UART1.BDH) // UART Baud Rate Registers: High
#define UART1_BDL (UART1.BDL) // UART Baud Rate Registers: Low
#define UART1_C1 (UART1.C1) // UART Control Register 1
#define UART1_C2 (UART1.C2) // UART Control Register 2
#define UART1_S1 (UART1.S1) // UART Status Register 1
#define UART1_S2 (UART1.S2) // UART Status Register 2
#define UART1_C3 (UART1.C3) // UART Control Register 3
#define UART1_D (UART1.D) // UART Data Register
#define UART1_MA1 (UART1.MA1) // UART Match Address Registers 1
#define UART1_MA2 (UART1.MA2) // UART Match Address Registers 2
#define UART1_C4 (UART1.C4) // UART Control Register 4
#define UART1_C5 (UART1.C5) // UART Control Register 5
#define UART1_ED (UART1.ED) // UART Extended Data Register
#define UART1_MODEM (UART1.MODEM) // UART Modem Register
#define UART1_IR (UART1.IR) // UART Infrared Register
#define UART1_PFIFO (UART1.PFIFO) // UART FIFO Parameters
#define UART1_CFIFO (UART1.CFIFO) // UART FIFO Control Register
#define UART1_SFIFO (UART1.SFIFO) // UART FIFO Status Register
#define UART1_TWFIFO (UART1.TWFIFO) // UART FIFO Transmit Watermark
#define UART1_TCFIFO (UART1.TCFIFO) // UART FIFO Transmit Count
#define UART1_RWFIFO (UART1.RWFIFO) // UART FIFO Receive Watermark
#define UART1_RCFIFO (UART1.RCFIFO) // UART FIFO Receive Count
#define UART1_C7816 (UART1.C7816) // UART 7816 Control Register
#define UART1_IE7816 (UART1.IE7816) // UART 7816 Interrupt Enable Register
#define UART1_IS7816 (UART1.IS7816) // UART 7816 Interrupt Status Register
#define UART1_WP7816T0 (UART1.WP7816T0) // UART 7816 Wait Parameter Register
#define UART1_WP7816T1 (UART1.WP7816T1) // UART 7816 Wait Parameter Register
#define UART1_WN7816 (UART1.WN7816) // UART 7816 Wait N Register
#define UART1_WF7816 (UART1.WF7816) // UART 7816 Wait FD Register
#define UART1_ET7816 (UART1.ET7816) // UART 7816 Error Threshold Register
#define UART1_TL7816 (UART1.TL7816) // UART 7816 Transmit Length Register
#define UART1_C6 (UART1.C6) // UART CEA709.1-B Control Register 6
#define UART1_PCTH (UART1.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High
#define UART1_PCTL (UART1.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART1_B1T (UART1.B1T) // UART CEA709.1-B Beta1 Timer
#define UART1_SDTH (UART1.SDTH) // UART CEA709.1-B Secondary Delay Timer High
#define UART1_SDTL (UART1.SDTL) // UART CEA709.1-B Secondary Delay Timer Low
#define UART1_PRE (UART1.PRE) // UART CEA709.1-B Preamble
#define UART1_TPL (UART1.TPL) // UART CEA709.1-B Transmit Packet Length
#define UART1_IE (UART1.IE) // UART CEA709.1-B Interrupt Enable Register
#define UART1_WB (UART1.WB) // UART CEA709.1-B WBASE
#define UART1_S3 (UART1.S3) // UART CEA709.1-B Status Register
#define UART1_S4 (UART1.S4) // UART CEA709.1-B Status Register
#define UART1_RPL (UART1.RPL) // UART CEA709.1-B Received Packet Length
#define UART1_RPREL (UART1.RPREL) // UART CEA709.1-B Received Preamble Length
#define UART1_CPW (UART1.CPW) // UART CEA709.1-B Collision Pulse Width
#define UART1_RIDT (UART1.RIDT) // UART CEA709.1-B Receive Indeterminate Time
#define UART1_TIDT (UART1.TIDT) // UART CEA709.1-B Transmit Indeterminate Time
#define UART2 (*(KINETISK_UART_t *)0x4006C000)
#define UART2_BDH (UART2.BDH) // UART Baud Rate Registers: High
#define UART2_BDL (UART2.BDL) // UART Baud Rate Registers: Low
#define UART2_C1 (UART2.C1) // UART Control Register 1
#define UART2_C2 (UART2.C2) // UART Control Register 2
#define UART2_S1 (UART2.S1) // UART Status Register 1
#define UART2_S2 (UART2.S2) // UART Status Register 2
#define UART2_C3 (UART2.C3) // UART Control Register 3
#define UART2_D (UART2.D) // UART Data Register
#define UART2_MA1 (UART2.MA1) // UART Match Address Registers 1
#define UART2_MA2 (UART2.MA2) // UART Match Address Registers 2
#define UART2_C4 (UART2.C4) // UART Control Register 4
#define UART2_C5 (UART2.C5) // UART Control Register 5
#define UART2_ED (UART2.ED) // UART Extended Data Register
#define UART2_MODEM (UART2.MODEM) // UART Modem Register
#define UART2_IR (UART2.IR) // UART Infrared Register
#define UART2_PFIFO (UART2.PFIFO) // UART FIFO Parameters
#define UART2_CFIFO (UART2.CFIFO) // UART FIFO Control Register
#define UART2_SFIFO (UART2.SFIFO) // UART FIFO Status Register
#define UART2_TWFIFO (UART2.TWFIFO) // UART FIFO Transmit Watermark
#define UART2_TCFIFO (UART2.TCFIFO) // UART FIFO Transmit Count
#define UART2_RWFIFO (UART2.RWFIFO) // UART FIFO Receive Watermark
#define UART2_RCFIFO (UART2.RCFIFO) // UART FIFO Receive Count
#define UART2_C7816 (UART2.C7816) // UART 7816 Control Register
#define UART2_IE7816 (UART2.IE7816) // UART 7816 Interrupt Enable Register
#define UART2_IS7816 (UART2.IS7816) // UART 7816 Interrupt Status Register
#define UART2_WP7816T0 (UART2.WP7816T0) // UART 7816 Wait Parameter Register
#define UART2_WP7816T1 (UART2.WP7816T1) // UART 7816 Wait Parameter Register
#define UART2_WN7816 (UART2.WN7816) // UART 7816 Wait N Register
#define UART2_WF7816 (UART2.WF7816) // UART 7816 Wait FD Register
#define UART2_ET7816 (UART2.ET7816) // UART 7816 Error Threshold Register
#define UART2_TL7816 (UART2.TL7816) // UART 7816 Transmit Length Register
#define UART2_C6 (UART2.C6) // UART CEA709.1-B Control Register 6
#define UART2_PCTH (UART2.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High
#define UART2_PCTL (UART2.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART2_B1T (UART2.B1T) // UART CEA709.1-B Beta1 Timer
#define UART2_SDTH (UART2.SDTH) // UART CEA709.1-B Secondary Delay Timer High
#define UART2_SDTL (UART2.SDTL) // UART CEA709.1-B Secondary Delay Timer Low
#define UART2_PRE (UART2.PRE) // UART CEA709.1-B Preamble
#define UART2_TPL (UART2.TPL) // UART CEA709.1-B Transmit Packet Length
#define UART2_IE (UART2.IE) // UART CEA709.1-B Interrupt Enable Register
#define UART2_WB (UART2.WB) // UART CEA709.1-B WBASE
#define UART2_S3 (UART2.S3) // UART CEA709.1-B Status Register
#define UART2_S4 (UART2.S4) // UART CEA709.1-B Status Register
#define UART2_RPL (UART2.RPL) // UART CEA709.1-B Received Packet Length
#define UART2_RPREL (UART2.RPREL) // UART CEA709.1-B Received Preamble Length
#define UART2_CPW (UART2.CPW) // UART CEA709.1-B Collision Pulse Width
#define UART2_RIDT (UART2.RIDT) // UART CEA709.1-B Receive Indeterminate Time
#define UART2_TIDT (UART2.TIDT) // UART CEA709.1-B Transmit Indeterminate Time

// Chapter 46: Synchronous Audio Interface (SAI)
#define I2S0_TCSR (*(volatile uint32_t *)0x4002F000) // SAI Transmit Control Register

Write Preview
Loading…
취소
저장