First commit, Teensy4 work-in-progress

teensy4/Arduino.h

@@ -0,0 +1,9 @@
+// This header file is in the public domain.
+
+#ifndef Arduino_h
+#define Arduino_h
+
+#include "WProgram.h"
+#include "pins_arduino.h"
+
+#endif

teensy4/Blink.cc

@@ -0,0 +1,16 @@
+// Only for testing with the Makefile - not actually part of the core library
+
+#include <Arduino.h>
+
+int led = 13;
+
+void setup() {
+  pinMode(led, OUTPUT);
+}
+
+void loop() {
+  digitalWrite(led, HIGH);
+  delay(1000);
+  digitalWrite(led, LOW);
+  delay(1000);
+}

teensy4/Client.h

@@ -0,0 +1,48 @@
+/*
+  Client.h - Base class that provides Client
+  Copyright (c) 2011 Adrian McEwen.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#if ARDUINO >= 100
+
+#ifndef client_h
+#define client_h
+#include "Print.h"
+#include "Stream.h"
+#include "IPAddress.h"
+
+class Client : public Stream {
+
+public:
+  virtual int connect(IPAddress ip, uint16_t port) =0;
+  virtual int connect(const char *host, uint16_t port) =0;
+  virtual size_t write(uint8_t) =0;
+  virtual size_t write(const uint8_t *buf, size_t size) =0;
+  virtual int available() = 0;
+  virtual int read() = 0;
+  virtual int read(uint8_t *buf, size_t size) = 0;
+  virtual int peek() = 0;
+  virtual void flush() = 0;
+  virtual void stop() = 0;
+  virtual uint8_t connected() = 0;
+  virtual operator bool() = 0;
+protected:
+  uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
+};
+
+#endif
+#endif

teensy4/EventResponder.cpp

@@ -0,0 +1,344 @@
+/* EventResponder - Simple event-based programming for Arduino
+ * Copyright 2017 Paul Stoffregen
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* EventResponder is an experimental API, almost certain to
+ * incompatibly change as it develops.  Please understand any
+ * programs you write now using EventResponder may need to be
+ * updated as EventResponder develops.
+ *
+ * Please post EventResponder post your feedback here:
+ *     https://forum.pjrc.com/threads/44723-Arduino-Events
+ */
+
+#include <Arduino.h>
+#include "EventResponder.h"
+
+EventResponder * EventResponder::firstYield = nullptr;
+EventResponder * EventResponder::lastYield = nullptr;
+EventResponder * EventResponder::firstInterrupt = nullptr;
+EventResponder * EventResponder::lastInterrupt = nullptr;
+bool EventResponder::runningFromYield = false;
+
+// TODO: interrupt disable/enable needed in many places!!!
+
+void EventResponder::triggerEventNotImmediate()
+{
+	bool irq = disableInterrupts();
+	if (_triggered == false) {
+		// not already triggered
+		if (_type == EventTypeYield) {
+			// normal type, called from yield()
+			if (firstYield == nullptr) {
+				_next = nullptr;
+				_prev = nullptr;
+				firstYield = this;
+				lastYield = this;
+			} else {
+				_next = nullptr;
+				_prev = lastYield;
+				_prev->_next = this;
+				lastYield = this;
+			}
+		} else if (_type == EventTypeInterrupt) {
+			// interrupt, called from software interrupt
+			if (firstInterrupt == nullptr) {
+				_next = nullptr;
+				_prev = nullptr;
+				firstInterrupt = this;
+				lastInterrupt = this;
+			} else {
+				_next = nullptr;
+				_prev = lastInterrupt;
+				_prev->_next = this;
+				lastInterrupt = this;
+			}
+			SCB_ICSR = SCB_ICSR_PENDSVSET; // set PendSV interrupt
+		} else {
+			// detached, easy :-)
+		}
+		_triggered = true;
+	}
+	enableInterrupts(irq);
+}
+
+void pendablesrvreq_isr(void)
+{
+	EventResponder::runFromInterrupt();
+}
+
+void EventResponder::runFromInterrupt()
+{
+	while (1) {
+		bool irq = disableInterrupts();
+		EventResponder *first = firstInterrupt;
+		if (first) {
+			firstInterrupt = first->_next;
+			if (firstInterrupt) {
+				firstInterrupt->_prev = nullptr;
+			} else {
+				lastInterrupt = nullptr;
+			}
+			enableInterrupts(irq);
+			first->_triggered = false;
+			(*(first->_function))(*first);
+		} else {
+			enableInterrupts(irq);
+			break;
+		}
+	}
+}
+
+bool EventResponder::clearEvent()
+{
+	bool ret = false;
+	bool irq = disableInterrupts();
+	if (_triggered) {
+		if (_type == EventTypeYield) {
+			if (_prev) {
+				_prev->_next = _next;
+			} else {
+				firstYield = _next;
+			}
+			if (_next) {
+				_next->_prev = _prev;
+			} else {
+				lastYield = _prev;
+			}
+		} else if (_type == EventTypeInterrupt) {
+			if (_prev) {
+				_prev->_next = _next;
+			} else {
+				firstInterrupt = _next;
+			}
+			if (_next) {
+				_next->_prev = _prev;
+			} else {
+				lastInterrupt = _prev;
+			}
+		}
+		_triggered = false;
+		ret = true;
+	}
+	enableInterrupts(irq);
+	return ret;
+}
+
+// this detach must be called with interrupts disabled
+void EventResponder::detachNoInterrupts()
+{
+	if (_type == EventTypeYield) {
+		if (_triggered) {
+			if (_prev) {
+				_prev->_next = _next;
+			} else {
+				firstYield = _next;
+			}
+			if (_next) {
+				_next->_prev = _prev;
+			} else {
+				lastYield = _prev;
+			}
+		}
+		_type = EventTypeDetached;
+	} else if (_type == EventTypeInterrupt) {
+		if (_triggered) {
+			if (_prev) {
+				_prev->_next = _next;
+			} else {
+				firstInterrupt = _next;
+			}
+			if (_next) {
+				_next->_prev = _prev;
+			} else {
+				lastInterrupt = _prev;
+			}
+		}
+		_type = EventTypeDetached;
+	}
+}
+
+
+//-------------------------------------------------------------
+
+
+MillisTimer * MillisTimer::listWaiting = nullptr;
+MillisTimer * MillisTimer::listActive = nullptr;
+
+void MillisTimer::begin(unsigned long milliseconds, EventResponderRef event)
+{
+	if (_state != TimerOff) end();
+	if (!milliseconds) return;
+	_event = &event;
+	_ms = (milliseconds > 2)? milliseconds-2 : 0;
+	_reload = 0;
+	addToWaitingList();
+}
+
+void MillisTimer::beginRepeating(unsigned long milliseconds, EventResponderRef event)
+{
+	if (_state != TimerOff) end();
+	if (!milliseconds) return;
+	_event = &event;
+	_ms = (milliseconds > 2)? milliseconds-2 : 0;
+	_reload = milliseconds;
+	addToWaitingList();
+}
+
+void MillisTimer::addToWaitingList()
+{
+	_prev = nullptr;
+	bool irq = disableTimerInterrupt();
+	_next = listWaiting;
+	listWaiting = this; // TODO: use STREX to avoid interrupt disable
+	_state = TimerWaiting;
+	enableTimerInterrupt(irq);
+}
+
+void MillisTimer::addToActiveList() // only called by runFromTimer()
+{
+	if (listActive == nullptr) {
+		// list is empty, easy case
+		_next = nullptr;
+		_prev = nullptr;
+		listActive = this;
+	} else if (_ms < listActive->_ms) {
+		// this timer triggers before any on the list
+		_next = listActive;
+		_prev = nullptr;
+		listActive->_prev = this;
+		// Decrement the next items wait time be our wait time as to properly handle waits for all other items...
+		listActive->_ms -= _ms;	
+		listActive = this;
+	} else {
+		// add this timer somewhere after the first already on the list
+		MillisTimer *timer = listActive;
+		while (timer->_next) {
+			_ms -= timer->_ms;
+			timer = timer->_next;
+			if (_ms < timer->_ms) {
+				// found the right place in the middle of list
+				_next = timer;
+				_prev = timer->_prev;
+				timer->_prev = this;
+				_prev->_next = this;
+				timer->_ms -= _ms;
+				_state = TimerActive;
+				return;
+			}
+		}
+		// add this time at the end of the list
+		_ms -= timer->_ms;
+		_next = nullptr;
+		_prev = timer;
+		timer->_next = this;
+	}
+	_state = TimerActive;
+}
+
+void MillisTimer::end()
+{
+	bool irq = disableTimerInterrupt();
+	TimerStateType s = _state;
+	if (s == TimerActive) {
+		if (_next) {
+			_next->_prev = _prev;
+			_next->_ms += _ms;   // add in the rest of our timing to next entry...
+		}
+		if (_prev) {
+			_prev->_next = _next;
+		} else {
+			listActive = _next;
+		}
+		_state = TimerOff;
+	} else if (s == TimerWaiting) {
+		if (listWaiting == this) {
+			listWaiting = _next;
+		} else {
+			MillisTimer *timer = listWaiting;
+			while (timer) {
+				if (timer->_next == this) {
+					timer->_next = _next;
+					break;
+				}
+				timer = timer->_next;
+			}
+		}
+		_state = TimerOff;
+	}
+	enableTimerInterrupt(irq);
+}
+
+void MillisTimer::runFromTimer()
+{
+	MillisTimer *timer = listActive;
+	while (timer) {
+		if (timer->_ms > 0) {
+			timer->_ms--;
+			break;
+		} else {
+			MillisTimer *next = timer->_next;
+			if (next) next->_prev = nullptr;
+			listActive = next;
+			timer->_state = TimerOff;
+			EventResponderRef event = *(timer->_event);
+			event.triggerEvent(0, timer);
+			if (timer->_reload) {
+				timer->_ms = timer->_reload;
+				timer->addToActiveList();
+			}
+			timer = listActive;
+		}
+	}
+	bool irq = disableTimerInterrupt();
+	MillisTimer *waiting = listWaiting;
+	listWaiting = nullptr; // TODO: use STREX to avoid interrupt disable
+	enableTimerInterrupt(irq);
+	while (waiting) {
+		MillisTimer *next = waiting->_next;
+		waiting->addToActiveList();
+		waiting = next;
+	}
+}
+
+// Long ago you could install your own systick interrupt handler by just
+// creating your own systick_isr() function.  No longer.  But if you
+// *really* want to commandeer systick, you can still do so by writing
+// your function into the RAM-based vector table.
+//
+//   _VectorsRam[15] = my_systick_function;
+//
+// However, for long-term portability, use a MillisTimer object to
+// generate an event every millisecond, and attach your function to
+// its EventResponder.  You can attach as a software interrupt, so your
+// code will run at lower interrupt priority for better compatibility
+// with libraries using mid-to-high priority interrupts.
+
+extern "C" volatile uint32_t systick_millis_count;
+void systick_isr(void)
+{
+	systick_millis_count++;
+	MillisTimer::runFromTimer();
+}
+
+

teensy4/EventResponder.h

@@ -0,0 +1,274 @@
+/* EventResponder - Simple event-based programming for Arduino
+ * Copyright 2017 Paul Stoffregen
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* EventResponder is an experimental API, almost certain to
+ * incompatibly change as it develops.  Please understand any
+ * programs you write now using EventResponder may need to be
+ * updated as EventResponder develops.
+ *
+ * Please post your EventResponder feedback here:
+ *     https://forum.pjrc.com/threads/44723-Arduino-Events
+ */
+
+#if !defined(EventResponder_h) && defined(__cplusplus)
+#define EventResponder_h
+
+#include <Arduino.h>
+
+/* EventResponder lets you control how your program responds to an event.
+ * Imagine a basketball or football (American soccer) player who gets the
+ * ball.  Usually they will pass to another player who has the best
+ * opportunity to score.  Similarly in Arduino programming, events are
+ * often triggered within interrupts or other timing sensitive code.
+ * EventResponder can call your function a short time later, giving you
+ * the ability to use Arduino functions and libraries which would not
+ * be safe to use from an interrupt.  However, some situations do call
+ * for the most immediate response, even if doing so is more difficult.
+ * EventResponder lets you choose how your function will be called,
+ * without editing the timers or libraries which trigger the events.
+ *
+ * Event handling functions called by EventResponder should complete
+ * their work quickly.  Avoid delays or operations which may take
+ * substantial time.  While your function runs, no other event functions
+ * (attached the same way) are able to run.
+ *
+ * If your EventResponder is triggered more than once before your
+ * function can run, only the last trigger is used.  Prior triggering,
+ * including the status integer and data pointer, are overwritten and
+ * your function is called only one time, based on the last trigger
+ * event.
+ */
+
+class EventResponder;
+typedef EventResponder& EventResponderRef;
+typedef void (*EventResponderFunction)(EventResponderRef);
+class EventResponder
+{
+public:
+	constexpr EventResponder() {
+	}
+	~EventResponder() {
+		detach();
+	}
+	enum EventType { // these are not meant for public consumption...
+		EventTypeDetached = 0, // no function is called
+		EventTypeYield,        // function is called from yield()
+		EventTypeImmediate,    // function is called immediately
+		EventTypeInterrupt,    // function is called from interrupt
+		EventTypeThread        // function is run as a new thread
+	};
+
+	// Attach a function to be called from yield().  This should be the
+	// default way to use EventResponder.  Calls from yield() allow use
+	// of Arduino libraries, String, Serial, etc.
+	void attach(EventResponderFunction function, uint8_t priority=128) {
+		bool irq = disableInterrupts();
+		detachNoInterrupts();
+		_function = function;
+		_type = EventTypeYield;
+		enableInterrupts(irq);
+	}
+
+	// Attach a function to be called immediately.  This provides the
+	// fastest possible response, but your function must be carefully
+	// designed.
+	void attachImmediate(EventResponderFunction function) {
+		bool irq = disableInterrupts();
+		detachNoInterrupts();
+		_function = function;
+		_type = EventTypeImmediate;
+		enableInterrupts(irq);
+	}
+
+	// Attach a function to be called from a low priority interrupt.
+	// Boards not supporting software triggered interrupts will implement
+	// this as attachImmediate.  On ARM and other platforms with software
+	// interrupts, this allow fast interrupt-based response, but with less
+	// disruption to other libraries requiring their own interrupts.
+	void attachInterrupt(EventResponderFunction function, uint8_t priority=128) {
+		bool irq = disableInterrupts();
+		detachNoInterrupts();
+		_function = function;
+		_type = EventTypeInterrupt;
+		SCB_SHPR3 |= 0x00FF0000; // configure PendSV, lowest priority
+		enableInterrupts(irq);
+	}
+
+	// Attach a function to be called as its own thread.  Boards not running
+	// a RTOS or pre-emptive scheduler shall implement this as attach().
+	void attachThread(EventResponderFunction function, void *param=nullptr) {
+		attach(function); // for non-RTOS usage, compile as default attach
+	}
+
+	// Do not call any function.  The user's program must occasionally check
+	// whether the event has occurred, or use one of the wait functions.
+	void detach() {
+		bool irq = disableInterrupts();
+		detachNoInterrupts();
+		enableInterrupts(irq);
+	}
+
+	// Trigger the event.  An optional status code and data may be provided.
+	// The code triggering the event does NOT control which of the above
+	// response methods will be used.
+	virtual void triggerEvent(int status=0, void *data=nullptr) {
+		_status = status;
+		_data = data;
+		if (_type == EventTypeImmediate) {
+			(*_function)(*this);
+		} else {
+			triggerEventNotImmediate();
+		}
+	}
+	// Clear an event which has been triggered, but has not yet caused a
+	// function to be called.
+	bool clearEvent();
+
+	// Get the event's status code.  Typically this will indicate if the event was
+	// triggered due to successful completion, or how much data was successfully
+	// processed (positive numbers) or an error (negative numbers).  The
+	// exact meaning of this status code depends on the code or library which
+	// triggers the event.
+	int getStatus() { return _status; }
+
+	// Get the optional data pointer associated with the event.  Often this
+	// will be NULL, or will be the object instance which triggered the event.
+	// Some libraries may use this to pass data associated with the event.
+	void * getData() { return _data; }
+
+	// An optional "context" may be associated with each EventResponder.
+	// When more than one EventResponder has the same function attached, these
+	// may be used to allow the function to obtain extra information needed
+	// depending on which EventResponder called it.
+	void setContext(void *context) { _context = context; }
+	void * getContext() { return _context; }
+
+	// Wait for event(s) to occur.  These are most likely to be useful when
+	// used with a scheduler or RTOS.
+	bool waitForEvent(EventResponderRef event, int timeout);
+	EventResponder * waitForEvent(EventResponder *list, int listsize, int timeout);
+
+	static void runFromYield() {
+		// First, check if yield was called from an interrupt
+		// never call normal handler functions from any interrupt context
+		uint32_t ipsr;
+		__asm__ volatile("mrs %0, ipsr\n" : "=r" (ipsr)::);
+		if (ipsr != 0) return;
+		// Next, check if any events have been triggered
+		bool irq = disableInterrupts();
+		EventResponder *first = firstYield;
+		if (first == nullptr) {
+			enableInterrupts(irq);
+			return;
+		}
+		// Finally, make sure we're not being recursively called,
+		// which can happen if the user's function does anything
+		// that calls yield.
+		if (runningFromYield) {
+			enableInterrupts(irq);
+			return;
+		}
+		// Ok, update the runningFromYield flag and process event
+		runningFromYield = true;
+		firstYield = first->_next;
+		if (firstYield) {
+			firstYield->_prev = nullptr;
+		} else {
+			lastYield = nullptr;
+		}
+		enableInterrupts(irq);
+		first->_triggered = false;
+		(*(first->_function))(*first);
+		runningFromYield = false;
+	}
+	static void runFromInterrupt();
+	operator bool() { return _triggered; }
+protected:
+	void triggerEventNotImmediate();
+	void detachNoInterrupts();
+	int _status = 0;
+	EventResponderFunction _function = nullptr;
+	void *_data = nullptr;
+	void *_context = nullptr;
+	EventResponder *_next = nullptr;
+	EventResponder *_prev = nullptr;
+	EventType _type = EventTypeDetached;
+	bool _triggered = false;
+	static EventResponder *firstYield;
+	static EventResponder *lastYield;
+	static EventResponder *firstInterrupt;
+	static EventResponder *lastInterrupt;
+	static bool runningFromYield;
+private:
+	static bool disableInterrupts() {
+		uint32_t primask;
+		__asm__ volatile("mrs %0, primask\n" : "=r" (primask)::);
+		__disable_irq();
+		return (primask == 0) ? true : false;
+	}
+	static void enableInterrupts(bool doit) {
+		if (doit) __enable_irq();
+	}
+};
+
+class MillisTimer
+{
+public:
+	constexpr MillisTimer() {
+	}
+	~MillisTimer() {
+		end();
+	}
+	void begin(unsigned long milliseconds, EventResponderRef event);
+	void beginRepeating(unsigned long milliseconds, EventResponderRef event);
+	void end();
+	static void runFromTimer();
+private:
+	void addToWaitingList();
+	void addToActiveList();
+	unsigned long _ms = 0;
+	unsigned long _reload = 0;
+	MillisTimer *_next = nullptr;
+	MillisTimer *_prev = nullptr;
+	EventResponder *_event = nullptr;
+	enum TimerStateType {
+		TimerOff = 0,
+		TimerWaiting,
+		TimerActive
+	};
+	volatile TimerStateType _state = TimerOff;
+	static MillisTimer *listWaiting; // single linked list of waiting to start timers
+	static MillisTimer *listActive;  // double linked list of running timers
+	static bool disableTimerInterrupt() {
+		uint32_t primask;
+		__asm__ volatile("mrs %0, primask\n" : "=r" (primask)::);
+		__disable_irq();
+		return (primask == 0) ? true : false;
+	}
+	static void enableTimerInterrupt(bool doit) {
+		if (doit) __enable_irq();
+	}
+};
+
+#endif

teensy4/HardwareSerial.h

@@ -0,0 +1,491 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef HardwareSerial_h
+#define HardwareSerial_h
+
+#include "imxrt.h"
+
+// Uncomment to enable 9 bit formats.  These are default disabled to save memory.
+//#define SERIAL_9BIT_SUPPORT
+//
+// On Windows & Linux, this file is in Arduino's hardware/teensy/avr/cores/teensy3
+//   folder.  The Windows installer puts Arduino in C:\Program Files (x86)\Arduino
+// On Macintosh, you must control-click Arduino and select "Show Package Contents", then
+//   look in Contents/Java/hardware/teensy/avr/cores/teensy3 to find this file.
+//
+// Teensy 3.x boards support 9 bit mode on all their serial ports
+// Teensy LC only supports 9 bit mode on Serial1.  Serial2 & Serial3 can't use 9 bits.
+
+
+#define SERIAL_7E1 0x02
+#define SERIAL_7O1 0x03
+#define SERIAL_8N1 0x00
+#define SERIAL_8E1 0x06
+#define SERIAL_8O1 0x07
+#define SERIAL_7E1_RXINV 0x12
+#define SERIAL_7O1_RXINV 0x13
+#define SERIAL_8N1_RXINV 0x10
+#define SERIAL_8E1_RXINV 0x16
+#define SERIAL_8O1_RXINV 0x17
+#define SERIAL_7E1_TXINV 0x22
+#define SERIAL_7O1_TXINV 0x23
+#define SERIAL_8N1_TXINV 0x20
+#define SERIAL_8E1_TXINV 0x26
+#define SERIAL_8O1_TXINV 0x27
+#define SERIAL_7E1_RXINV_TXINV 0x32
+#define SERIAL_7O1_RXINV_TXINV 0x33
+#define SERIAL_8N1_RXINV_TXINV 0x30
+#define SERIAL_8E1_RXINV_TXINV 0x36
+#define SERIAL_8O1_RXINV_TXINV 0x37
+#ifdef SERIAL_9BIT_SUPPORT
+#define SERIAL_9N1 0x84
+#define SERIAL_9E1 0x8E
+#define SERIAL_9O1 0x8F
+#define SERIAL_9N1_RXINV 0x94
+#define SERIAL_9E1_RXINV 0x9E
+#define SERIAL_9O1_RXINV 0x9F
+#define SERIAL_9N1_TXINV 0xA4
+#define SERIAL_9E1_TXINV 0xAE
+#define SERIAL_9O1_TXINV 0xAF
+#define SERIAL_9N1_RXINV_TXINV 0xB4
+#define SERIAL_9E1_RXINV_TXINV 0xBE
+#define SERIAL_9O1_RXINV_TXINV 0xBF
+#endif
+// Teensy LC and 3.5 and 3.6 Uarts have 1/2 bit stop setting
+#if defined(__MK64FX512__) || defined(__MK66FX1M0__) || defined(KINETISL)
+#define SERIAL_2STOP_BITS 0x100
+#define SERIAL_8E2 (SERIAL_8E1 | SERIAL_2STOP_BITS)
+#define SERIAL_8O2 (SERIAL_8O1 | SERIAL_2STOP_BITS)
+#define SERIAL_8E2_RXINV (SERIAL_8E1_RXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8O2_RXINV (SERIAL_8O1_RXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8E2_TXINV (SERIAL_8E1_TXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8O2_TXINV (SERIAL_8O1_TXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8E2_RXINV_TXINV (SERIAL_8E1_RXINV_TXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8O2_RXINV_TXINV (SERIAL_8O1_RXINV_TXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8N2 (SERIAL_8N1 | SERIAL_2STOP_BITS)
+#define SERIAL_8N2_RXINV (SERIAL_8N1_RXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8N2_TXINV (SERIAL_8N1_TXINV | SERIAL_2STOP_BITS)
+#define SERIAL_8N2_RXINV_TXINV (SERIAL_8N1_RXINV_TXINV | SERIAL_2STOP_BITS)
+#else
+// for Teensy 3.0-3.2 we can fake 2 stop bits by using 9 bit mode
+#define SERIAL_8N2 0x04
+#define SERIAL_8N2_RXINV 0x14
+#define SERIAL_8N2_TXINV 0x24
+#define SERIAL_8N2_RXINV_TXINV 0x34
+#endif
+// bit0: parity, 0=even, 1=odd
+// bit1: parity, 0=disable, 1=enable
+// bit2: mode, 1=9bit, 0=8bit
+// bit3: mode10: 1=10bit, 0=8bit
+// bit4: rxinv, 0=normal, 1=inverted
+// bit5: txinv, 0=normal, 1=inverted
+// bit6: unused
+// bit7: actual data goes into 9th bit
+
+
+// TODO: replace with proper divisor+oversample calculation
+#define BAUD2DIV(baud) (24000000/16/(baud))
+
+/*
+#if defined(KINETISK)
+#define BAUD2DIV(baud)  (((F_CPU * 2) + ((baud) >> 1)) / (baud))
+#define BAUD2DIV2(baud) (((F_CPU * 2) + ((baud) >> 1)) / (baud))
+#define BAUD2DIV3(baud) (((F_BUS * 2) + ((baud) >> 1)) / (baud))
+#elif defined(KINETISL)
+
+#if F_CPU <= 2000000
+#define BAUD2DIV(baud)  (((F_PLL / 16 ) + ((baud) >> 1)) / (baud))
+#elif F_CPU <= 16000000
+#define BAUD2DIV(baud)  (((F_PLL / (F_PLL / 1000000)) + ((baud) >> 1)) / (baud))
+#else
+#define BAUD2DIV(baud)  (((F_PLL / 2 / 16) + ((baud) >> 1)) / (baud))
+#endif
+
+#define BAUD2DIV2(baud) (((F_BUS / 16) + ((baud) >> 1)) / (baud))
+#define BAUD2DIV3(baud) (((F_BUS / 16) + ((baud) >> 1)) / (baud))
+#endif
+*/
+
+
+// C language implementation
+//
+#ifdef __cplusplus
+extern "C" {
+#endif
+void serial_begin(uint32_t divisor);
+void serial_format(uint32_t format);
+void serial_end(void);
+void serial_set_transmit_pin(uint8_t pin);
+void serial_set_rx(uint8_t pin);
+void serial_set_tx(uint8_t pin, uint8_t opendrain);
+int serial_set_rts(uint8_t pin);
+int serial_set_cts(uint8_t pin);
+void serial_putchar(uint32_t c);
+void serial_write(const void *buf, unsigned int count);
+void serial_flush(void);
+int serial_write_buffer_free(void);
+int serial_available(void);
+int serial_getchar(void);
+int serial_peek(void);
+void serial_clear(void);
+void serial_print(const char *p);
+void serial_phex(uint32_t n);
+void serial_phex16(uint32_t n);
+void serial_phex32(uint32_t n);
+
+void serial2_begin(uint32_t divisor);
+void serial2_format(uint32_t format);
+void serial2_end(void);
+void serial2_set_transmit_pin(uint8_t pin);
+void serial2_set_rx(uint8_t pin);
+void serial2_set_tx(uint8_t pin, uint8_t opendrain);
+int serial2_set_rts(uint8_t pin);
+int serial2_set_cts(uint8_t pin);
+void serial2_putchar(uint32_t c);
+void serial2_write(const void *buf, unsigned int count);
+void serial2_flush(void);
+int serial2_write_buffer_free(void);
+int serial2_available(void);
+int serial2_getchar(void);
+int serial2_peek(void);
+void serial2_clear(void);
+
+void serial3_begin(uint32_t divisor);
+void serial3_format(uint32_t format);
+void serial3_end(void);
+void serial3_set_transmit_pin(uint8_t pin);
+void serial3_set_rx(uint8_t pin);
+void serial3_set_tx(uint8_t pin, uint8_t opendrain);
+int serial3_set_rts(uint8_t pin);
+int serial3_set_cts(uint8_t pin);
+void serial3_putchar(uint32_t c);
+void serial3_write(const void *buf, unsigned int count);
+void serial3_flush(void);
+int serial3_write_buffer_free(void);
+int serial3_available(void);
+int serial3_getchar(void);
+int serial3_peek(void);
+void serial3_clear(void);
+
+void serial4_begin(uint32_t divisor);
+void serial4_format(uint32_t format);
+void serial4_end(void);
+void serial4_set_transmit_pin(uint8_t pin);
+void serial4_set_rx(uint8_t pin);
+void serial4_set_tx(uint8_t pin, uint8_t opendrain);
+int serial4_set_rts(uint8_t pin);
+int serial4_set_cts(uint8_t pin);
+void serial4_putchar(uint32_t c);
+void serial4_write(const void *buf, unsigned int count);
+void serial4_flush(void);
+int serial4_write_buffer_free(void);
+int serial4_available(void);
+int serial4_getchar(void);
+int serial4_peek(void);
+void serial4_clear(void);
+
+void serial5_begin(uint32_t divisor);
+void serial5_format(uint32_t format);
+void serial5_end(void);
+void serial5_set_transmit_pin(uint8_t pin);
+void serial5_set_rx(uint8_t pin);
+void serial5_set_tx(uint8_t pin, uint8_t opendrain);
+int serial5_set_rts(uint8_t pin);
+int serial5_set_cts(uint8_t pin);
+void serial5_putchar(uint32_t c);
+void serial5_write(const void *buf, unsigned int count);
+void serial5_flush(void);
+int serial5_write_buffer_free(void);
+int serial5_available(void);
+int serial5_getchar(void);
+int serial5_peek(void);
+void serial5_clear(void);
+
+void serial6_begin(uint32_t divisor);
+void serial6_format(uint32_t format);
+void serial6_end(void);
+void serial6_set_transmit_pin(uint8_t pin);
+void serial6_set_rx(uint8_t pin);
+void serial6_set_tx(uint8_t pin, uint8_t opendrain);
+int serial6_set_rts(uint8_t pin);
+int serial6_set_cts(uint8_t pin);
+void serial6_putchar(uint32_t c);
+void serial6_write(const void *buf, unsigned int count);
+void serial6_flush(void);
+int serial6_write_buffer_free(void);
+int serial6_available(void);
+int serial6_getchar(void);
+int serial6_peek(void);
+void serial6_clear(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+// C++ interface
+//
+#ifdef __cplusplus
+#include "Stream.h"
+class HardwareSerial : public Stream
+{
+public:
+	constexpr HardwareSerial() {}
+	virtual void begin(uint32_t baud) { serial_begin(BAUD2DIV(baud)); }
+	virtual void begin(uint32_t baud, uint32_t format) {
+					  serial_begin(BAUD2DIV(baud));
+					  serial_format(format); }
+	virtual void end(void)		{ serial_end(); }
+	virtual void transmitterEnable(uint8_t pin) { serial_set_transmit_pin(pin); }
+	virtual void setRX(uint8_t pin) { serial_set_rx(pin); }
+	virtual void setTX(uint8_t pin, bool opendrain=false) { serial_set_tx(pin, opendrain); }
+	virtual bool attachRts(uint8_t pin) { return serial_set_rts(pin); }
+	virtual bool attachCts(uint8_t pin) { return serial_set_cts(pin); }
+	virtual int available(void)     { return serial_available(); }
+	virtual int peek(void)          { return serial_peek(); }
+	virtual int read(void)          { return serial_getchar(); }
+	virtual void flush(void)        { serial_flush(); }
+	virtual void clear(void)	{ serial_clear(); }
+	virtual int availableForWrite(void) { return serial_write_buffer_free(); }
+	using Print::write;
+	virtual size_t write(uint8_t c) { serial_putchar(c); return 1; }
+	virtual size_t write(unsigned long n)   { return write((uint8_t)n); }
+	virtual size_t write(long n)            { return write((uint8_t)n); }
+	virtual size_t write(unsigned int n)    { return write((uint8_t)n); }
+	virtual size_t write(int n)             { return write((uint8_t)n); }
+	virtual size_t write(const uint8_t *buffer, size_t size)
+					{ serial_write(buffer, size); return size; }
+        virtual size_t write(const char *str)	{ size_t len = strlen(str);
+					  serial_write((const uint8_t *)str, len);
+					  return len; }
+	virtual size_t write9bit(uint32_t c)	{ serial_putchar(c); return 1; }
+	operator bool()			{ return true; }
+};
+extern HardwareSerial Serial1;
+extern void serialEvent1(void);
+
+class HardwareSerial2 : public HardwareSerial
+{
+public:
+	constexpr HardwareSerial2() {}
+	virtual void begin(uint32_t baud) { serial2_begin(BAUD2DIV(baud)); }
+	virtual void begin(uint32_t baud, uint32_t format) {
+					  serial2_begin(BAUD2DIV(baud));
+					  serial2_format(format); }
+	virtual void end(void)		{ serial2_end(); }
+	virtual void transmitterEnable(uint8_t pin) { serial2_set_transmit_pin(pin); }
+	virtual void setRX(uint8_t pin) { serial2_set_rx(pin); }
+	virtual void setTX(uint8_t pin, bool opendrain=false) { serial2_set_tx(pin, opendrain); }
+	virtual bool attachRts(uint8_t pin) { return serial2_set_rts(pin); }
+	virtual bool attachCts(uint8_t pin) { return serial2_set_cts(pin); }
+	virtual int available(void)     { return serial2_available(); }
+	virtual int peek(void)          { return serial2_peek(); }
+	virtual int read(void)          { return serial2_getchar(); }
+	virtual void flush(void)        { serial2_flush(); }
+	virtual void clear(void)	{ serial2_clear(); }
+	virtual int availableForWrite(void) { return serial2_write_buffer_free(); }
+	using Print::write;
+	virtual size_t write(uint8_t c) { serial2_putchar(c); return 1; }
+	virtual size_t write(unsigned long n)   { return write((uint8_t)n); }
+	virtual size_t write(long n)            { return write((uint8_t)n); }
+	virtual size_t write(unsigned int n)    { return write((uint8_t)n); }
+	virtual size_t write(int n)             { return write((uint8_t)n); }
+	virtual size_t write(const uint8_t *buffer, size_t size)
+					{ serial2_write(buffer, size); return size; }
+        virtual size_t write(const char *str)	{ size_t len = strlen(str);
+					  serial2_write((const uint8_t *)str, len);
+					  return len; }
+	virtual size_t write9bit(uint32_t c)	{ serial2_putchar(c); return 1; }
+	operator bool()			{ return true; }
+};
+extern HardwareSerial2 Serial2;
+extern void serialEvent2(void);
+
+class HardwareSerial3 : public HardwareSerial
+{
+public:
+	constexpr HardwareSerial3() {}
+	virtual void begin(uint32_t baud) { serial3_begin(BAUD2DIV(baud)); }
+	virtual void begin(uint32_t baud, uint32_t format) {
+					  serial3_begin(BAUD2DIV(baud));
+					  serial3_format(format); }
+	virtual void end(void)          { serial3_end(); }
+	virtual void transmitterEnable(uint8_t pin) { serial3_set_transmit_pin(pin); }
+	virtual void setRX(uint8_t pin) { serial3_set_rx(pin); }
+	virtual void setTX(uint8_t pin, bool opendrain=false) { serial3_set_tx(pin, opendrain); }
+	virtual bool attachRts(uint8_t pin) { return serial3_set_rts(pin); }
+	virtual bool attachCts(uint8_t pin) { return serial3_set_cts(pin); }
+	virtual int available(void)     { return serial3_available(); }
+	virtual int peek(void)          { return serial3_peek(); }
+	virtual int read(void)          { return serial3_getchar(); }
+	virtual void flush(void)        { serial3_flush(); }
+	virtual void clear(void)	{ serial3_clear(); }
+	virtual int availableForWrite(void) { return serial3_write_buffer_free(); }
+	using Print::write;
+	virtual size_t write(uint8_t c) { serial3_putchar(c); return 1; }
+	virtual size_t write(unsigned long n)   { return write((uint8_t)n); }
+	virtual size_t write(long n)            { return write((uint8_t)n); }
+	virtual size_t write(unsigned int n)    { return write((uint8_t)n); }
+	virtual size_t write(int n)             { return write((uint8_t)n); }
+	virtual size_t write(const uint8_t *buffer, size_t size)
+					{ serial3_write(buffer, size); return size; }
+        virtual size_t write(const char *str)	{ size_t len = strlen(str);
+					  serial3_write((const uint8_t *)str, len);
+					  return len; }
+	virtual size_t write9bit(uint32_t c)	{ serial3_putchar(c); return 1; }
+	operator bool()			{ return true; }
+};
+extern HardwareSerial3 Serial3;
+extern void serialEvent3(void);
+
+class HardwareSerial4 : public HardwareSerial
+{
+public:
+	constexpr HardwareSerial4() {}
+	virtual void begin(uint32_t baud) { serial4_begin(BAUD2DIV(baud)); }
+	virtual void begin(uint32_t baud, uint32_t format) {
+					  serial4_begin(BAUD2DIV(baud));
+					  serial4_format(format); }
+	virtual void end(void)          { serial4_end(); }
+	virtual void transmitterEnable(uint8_t pin) { serial4_set_transmit_pin(pin); }
+	virtual void setRX(uint8_t pin) { serial4_set_rx(pin); }
+	virtual void setTX(uint8_t pin, bool opendrain=false) { serial4_set_tx(pin, opendrain); }
+	virtual bool attachRts(uint8_t pin) { return serial4_set_rts(pin); }
+	virtual bool attachCts(uint8_t pin) { return serial4_set_cts(pin); }
+	virtual int available(void)     { return serial4_available(); }
+	virtual int peek(void)          { return serial4_peek(); }
+	virtual int read(void)          { return serial4_getchar(); }
+	virtual void flush(void)        { serial4_flush(); }
+	virtual void clear(void)	{ serial4_clear(); }
+	virtual int availableForWrite(void) { return serial4_write_buffer_free(); }
+	using Print::write;
+	virtual size_t write(uint8_t c) { serial4_putchar(c); return 1; }
+	virtual size_t write(unsigned long n)   { return write((uint8_t)n); }
+	virtual size_t write(long n)            { return write((uint8_t)n); }
+	virtual size_t write(unsigned int n)    { return write((uint8_t)n); }
+	virtual size_t write(int n)             { return write((uint8_t)n); }
+	virtual size_t write(const uint8_t *buffer, size_t size)
+					{ serial4_write(buffer, size); return size; }
+        virtual size_t write(const char *str)	{ size_t len = strlen(str);
+					  serial4_write((const uint8_t *)str, len);
+					  return len; }
+	virtual size_t write9bit(uint32_t c)	{ serial4_putchar(c); return 1; }
+	operator bool()			{ return true; }
+};
+extern HardwareSerial4 Serial4;
+extern void serialEvent4(void);
+
+class HardwareSerial5 : public HardwareSerial
+{
+public:
+	constexpr HardwareSerial5() {}
+	virtual void begin(uint32_t baud) { serial5_begin(BAUD2DIV(baud)); }
+	virtual void begin(uint32_t baud, uint32_t format) {
+					  serial5_begin(BAUD2DIV(baud));
+					  serial5_format(format); }
+	virtual void end(void)          { serial5_end(); }
+	virtual void transmitterEnable(uint8_t pin) { serial5_set_transmit_pin(pin); }
+	virtual void setRX(uint8_t pin) { serial5_set_rx(pin); }
+	virtual void setTX(uint8_t pin, bool opendrain=false) { serial5_set_tx(pin, opendrain); }
+	virtual bool attachRts(uint8_t pin) { return serial5_set_rts(pin); }
+	virtual bool attachCts(uint8_t pin) { return serial5_set_cts(pin); }
+	virtual int available(void)     { return serial5_available(); }
+	virtual int peek(void)          { return serial5_peek(); }
+	virtual int read(void)          { return serial5_getchar(); }
+	virtual void flush(void)        { serial5_flush(); }
+	virtual void clear(void)	{ serial5_clear(); }
+	virtual int availableForWrite(void) { return serial5_write_buffer_free(); }
+	using Print::write;
+	virtual size_t write(uint8_t c) { serial5_putchar(c); return 1; }
+	virtual size_t write(unsigned long n)   { return write((uint8_t)n); }
+	virtual size_t write(long n)            { return write((uint8_t)n); }
+	virtual size_t write(unsigned int n)    { return write((uint8_t)n); }
+	virtual size_t write(int n)             { return write((uint8_t)n); }
+	virtual size_t write(const uint8_t *buffer, size_t size)
+					{ serial5_write(buffer, size); return size; }
+        virtual size_t write(const char *str)	{ size_t len = strlen(str);
+					  serial5_write((const uint8_t *)str, len);
+					  return len; }
+	virtual size_t write9bit(uint32_t c)	{ serial5_putchar(c); return 1; }
+	operator bool()			{ return true; }
+};
+extern HardwareSerial5 Serial5;
+extern void serialEvent5(void);
+
+class HardwareSerial6 : public HardwareSerial
+{
+public:
+	constexpr HardwareSerial6() {}
+#if defined(__MK66FX1M0__)	// For LPUART just pass baud straight in. 
+	virtual void begin(uint32_t baud) { serial6_begin(baud); }
+	virtual void begin(uint32_t baud, uint32_t format) {
+					  serial6_begin(baud);
+					  serial6_format(format); }
+#else
+	virtual void begin(uint32_t baud) { serial6_begin(BAUD2DIV(baud)); }
+	virtual void begin(uint32_t baud, uint32_t format) {
+					  serial6_begin(BAUD2DIV(baud));
+					  serial6_format(format); }
+#endif
+	virtual void end(void)          { serial6_end(); }
+	virtual void transmitterEnable(uint8_t pin) { serial6_set_transmit_pin(pin); }
+	virtual void setRX(uint8_t pin) { serial6_set_rx(pin); }
+	virtual void setTX(uint8_t pin, bool opendrain=false) { serial6_set_tx(pin, opendrain); }
+	virtual bool attachRts(uint8_t pin) { return serial6_set_rts(pin); }
+	virtual bool attachCts(uint8_t pin) { return serial6_set_cts(pin); }
+	virtual int available(void)     { return serial6_available(); }
+	virtual int peek(void)          { return serial6_peek(); }
+	virtual int read(void)          { return serial6_getchar(); }
+	virtual void flush(void)        { serial6_flush(); }
+	virtual void clear(void)	{ serial6_clear(); }
+	virtual int availableForWrite(void) { return serial6_write_buffer_free(); }
+	using Print::write;
+	virtual size_t write(uint8_t c) { serial6_putchar(c); return 1; }
+	virtual size_t write(unsigned long n)   { return write((uint8_t)n); }
+	virtual size_t write(long n)            { return write((uint8_t)n); }
+	virtual size_t write(unsigned int n)    { return write((uint8_t)n); }
+	virtual size_t write(int n)             { return write((uint8_t)n); }
+	virtual size_t write(const uint8_t *buffer, size_t size)
+					{ serial6_write(buffer, size); return size; }
+        virtual size_t write(const char *str)	{ size_t len = strlen(str);
+					  serial6_write((const uint8_t *)str, len);
+					  return len; }
+	virtual size_t write9bit(uint32_t c)	{ serial6_putchar(c); return 1; }
+	operator bool()			{ return true; }
+};
+extern HardwareSerial6 Serial6;
+extern void serialEvent6(void);
+
+
+
+
+#endif
+#endif

teensy4/IPAddress.h

@@ -0,0 +1,125 @@
+/*
+ *
+ * MIT License:
+ * Copyright (c) 2011 Adrian McEwen
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * adrianm@mcqn.com 1/1/2011
+ */
+
+#ifndef IPAddress_h
+#define IPAddress_h
+
+#include <Printable.h>
+#include <WString.h>
+
+// A class to make it easier to handle and pass around IP addresses
+
+class IPAddress : public Printable {
+private:
+	union {
+		uint8_t bytes[4]; // IPv4 address
+		uint32_t dword;
+	} _address;
+
+	// Access the raw byte array containing the address.  Because this returns a pointer
+	// to the internal structure rather than a copy of the address this function should only
+	// be used when you know that the usage of the returned uint8_t* will be transient and not
+	// stored.
+	uint8_t * raw_address() { return _address.bytes; };
+
+public:
+	// Constructors
+	IPAddress() {
+		_address.dword = 0;
+	}
+	IPAddress(uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4) {
+		_address.bytes[0] = b1;
+		_address.bytes[1] = b2;
+		_address.bytes[2] = b3;
+		_address.bytes[3] = b4;
+	}
+	IPAddress(uint32_t address) {
+		_address.dword = address;
+	}
+	IPAddress(const uint8_t *address) {
+		// TODO: use unaligned read on Cortex-M4
+		_address.bytes[0] = *address++;
+		_address.bytes[1] = *address++;
+		_address.bytes[2] = *address++;
+		_address.bytes[3] = *address++;
+	}
+
+	bool fromString(const char *address);
+	bool fromString(const String &address) {
+		return fromString(address.c_str());
+	}
+
+	// Overloaded cast operator to allow IPAddress objects to be used where a pointer
+	// to a four-byte uint8_t array is expected
+	operator uint32_t () {
+		return _address.dword;
+	}
+	bool operator==(const IPAddress& addr) {
+		return _address.dword == addr._address.dword;
+	}
+	bool operator==(const uint8_t* addr) {
+		// TODO: use unaligned read on Cortex-M4
+		return (_address.bytes[0] == addr[0]
+			&& _address.bytes[1] == addr[1]
+			&& _address.bytes[2] == addr[2]
+			&& _address.bytes[3] == addr[3]);
+	}
+
+	// Overloaded index operator to allow getting and setting individual octets of the address
+	uint8_t operator[](int index) const {
+		return _address.bytes[index];
+	};
+	uint8_t& operator[](int index) {
+		return _address.bytes[index];
+	};
+
+	// Overloaded copy operators to allow initialisation of IPAddress objects from other types
+	IPAddress& operator=(const uint8_t *address) {
+		// TODO: use unaligned read on Cortex-M4
+		_address.bytes[0] = *address++;
+		_address.bytes[1] = *address++;
+		_address.bytes[2] = *address++;
+		_address.bytes[3] = *address++;
+		return *this;
+	}
+	IPAddress& operator=(uint32_t address) {
+		_address.dword = address;
+		return *this;
+	}
+
+	virtual size_t printTo(Print& p) const;
+
+	friend class EthernetClass;
+	friend class UDP;
+	friend class Client;
+	friend class Server;
+	friend class DhcpClass;
+	friend class DNSClient;
+};
+
+const IPAddress INADDR_NONE((uint32_t)0);
+
+
+#endif

teensy4/IntervalTimer.cpp

@@ -0,0 +1,113 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "IntervalTimer.h"
+
+static void dummy_funct(void);
+
+#define NUM_CHANNELS 4
+static void (*funct_table[4])(void) = {dummy_funct, dummy_funct, dummy_funct, dummy_funct};
+uint8_t IntervalTimer::nvic_priorites[4] = {255, 255, 255, 255};
+
+
+bool IntervalTimer::beginCycles(void (*funct)(), uint32_t cycles)
+{
+#if 0
+	if (channel) {
+		channel->TCTRL = 0;
+		channel->TFLG = 1;
+	} else {
+		SIM_SCGC6 |= SIM_SCGC6_PIT;
+		__asm__ volatile("nop"); // solves timing problem on Teensy 3.5
+		PIT_MCR = 1;
+		channel = KINETISK_PIT_CHANNELS;
+		while (1) {
+			if (channel->TCTRL == 0) break;
+			if (++channel >= KINETISK_PIT_CHANNELS + NUM_CHANNELS) {
+				channel = NULL;
+				return false;
+			}
+		}
+	}
+	int index = channel - KINETISK_PIT_CHANNELS;
+	funct_table[index] = funct;
+	channel->LDVAL = cycles;
+	channel->TCTRL = 3;
+#if defined(KINETISK)
+	NVIC_SET_PRIORITY(IRQ_PIT_CH0 + index, nvic_priority);
+	NVIC_ENABLE_IRQ(IRQ_PIT_CH0 + index);
+#elif defined(KINETISL)
+	nvic_priorites[index] = nvic_priority;
+	if (nvic_priorites[0] <= nvic_priorites[1]) {
+		NVIC_SET_PRIORITY(IRQ_PIT, nvic_priorites[0]);
+	} else {
+		NVIC_SET_PRIORITY(IRQ_PIT, nvic_priorites[1]);
+	}
+	NVIC_ENABLE_IRQ(IRQ_PIT);
+#endif
+#endif
+	return true;
+}
+
+
+void IntervalTimer::end() {
+#if 0
+	if (channel) {
+		int index = channel - KINETISK_PIT_CHANNELS;
+		// TODO: disable IRQ_PIT, but only if both instances ended
+		funct_table[index] = dummy_funct;
+		channel->TCTRL = 0;
+		nvic_priorites[index] = 255;
+		if (nvic_priorites[0] <= nvic_priorites[1]) {
+			NVIC_SET_PRIORITY(IRQ_PIT, nvic_priorites[0]);
+		} else {
+			NVIC_SET_PRIORITY(IRQ_PIT, nvic_priorites[1]);
+		}
+		channel = 0;
+	}
+#endif
+}
+
+
+void pit_isr() {
+	if (PIT_TFLG0) {
+		PIT_TFLG0 = 1;
+		funct_table[0]();
+	}
+	if (PIT_TFLG1) {
+		PIT_TFLG1 = 1;
+		funct_table[1]();
+	}
+}
+
+static void dummy_funct(void)
+{
+}
+

teensy4/IntervalTimer.h

@@ -0,0 +1,135 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2018 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __INTERVALTIMER_H__
+#define __INTERVALTIMER_H__
+
+#include <stddef.h>
+#include "imxrt.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+class IntervalTimer {
+private:
+	static const uint32_t MAX_PERIOD = UINT32_MAX / (24000000 / 1000000);
+public:
+	IntervalTimer() {
+		channel = NULL;
+		nvic_priority = 128;
+	}
+	~IntervalTimer() {
+		end();
+	}
+	bool begin(void (*funct)(), unsigned int microseconds) {
+		if (microseconds == 0 || microseconds > MAX_PERIOD) return false;
+		uint32_t cycles = (24000000 / 1000000) * microseconds - 1;
+		if (cycles < 36) return false;
+		return beginCycles(funct, cycles);
+	}
+	bool begin(void (*funct)(), int microseconds) {
+		if (microseconds < 0) return false;
+		return begin(funct, (unsigned int)microseconds);
+	}
+	bool begin(void (*funct)(), unsigned long microseconds) {
+		return begin(funct, (unsigned int)microseconds);
+	}
+	bool begin(void (*funct)(), long microseconds) {
+		return begin(funct, (int)microseconds);
+	}
+	bool begin(void (*funct)(), float microseconds) {
+		if (microseconds <= 0 || microseconds > MAX_PERIOD) return false;
+		uint32_t cycles = (float)(24000000 / 1000000) * microseconds - 0.5;
+		if (cycles < 36) return false;
+		return beginCycles(funct, cycles);
+	}
+	bool begin(void (*funct)(), double microseconds) {
+		return begin(funct, (float)microseconds);
+	}
+	void update(unsigned int microseconds) {
+		if (microseconds == 0 || microseconds > MAX_PERIOD) return;
+		uint32_t cycles = (24000000 / 1000000) * microseconds - 1;
+		if (cycles < 36) return;
+		if (channel) channel->LDVAL = cycles;
+	}
+	void update(int microseconds) {
+		if (microseconds < 0) return;
+		return update((unsigned int)microseconds);
+	}
+	void update(unsigned long microseconds) {
+		return update((unsigned int)microseconds);
+	}
+	void update(long microseconds) {
+		return update((int)microseconds);
+	}
+	void update(float microseconds) {
+		if (microseconds <= 0 || microseconds > MAX_PERIOD) return;
+		uint32_t cycles = (float)(24000000 / 1000000) * microseconds - 0.5;
+		if (cycles < 36) return;
+		if (channel) channel->LDVAL = cycles;
+	}
+	void update(double microseconds) {
+		return update((float)microseconds);
+	}
+	void end();
+	void priority(uint8_t n) {
+		nvic_priority = n;
+		if (channel) {
+			int index = channel - IMXRT_PIT_CHANNELS;
+			nvic_priorites[index] = nvic_priority;
+			if (nvic_priorites[0] <= nvic_priorites[1]) {
+				NVIC_SET_PRIORITY(IRQ_PIT, nvic_priorites[0]);
+			} else {
+				NVIC_SET_PRIORITY(IRQ_PIT, nvic_priorites[1]);
+			}
+		}
+	}
+	operator IRQ_NUMBER_t() {
+		if (channel) {
+			return IRQ_PIT;
+		}
+		return (IRQ_NUMBER_t)NVIC_NUM_INTERRUPTS;
+	}
+private:
+//#define IMXRT_PIT_CHANNELS              ((IMXRT_PIT_CHANNEL_t *)(&(IMXRT_PIT.offset100)))
+	IMXRT_PIT_CHANNEL_t *channel;
+	uint8_t nvic_priority;
+	static uint8_t nvic_priorites[4];
+	bool beginCycles(void (*funct)(), uint32_t cycles);
+
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

teensy4/Makefile

@@ -0,0 +1,38 @@
+CPUARCH = cortex-m7
+DEFS = -DUSB_SERIAL -D__IMXRT1052__ -DTEENSYDUINO=145 -DARDUINO=10808 -DF_CPU=396000000 -DLAYOUT_US_ENGLISH
+SECTIONS = -ffunction-sections -fdata-sections
+CPPFLAGS = -Wall -g -O2 $(SECTIONS) -mcpu=$(CPUARCH) -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -fsingle-precision-constant -I. $(DEFS)
+CXXFLAGS = -std=gnu++14 -felide-constructors -fno-exceptions -fno-rtti
+LDFLAGS = -Wl,--gc-sections,--print-gc-sections,--print-memory-usage --specs=nano.specs -nostdlib -nostartfiles -Timxrt.ld
+
+C_FILES := $(wildcard *.c)
+CPP_FILES := $(wildcard *.cpp)
+
+OBJS := $(C_FILES:.c=.o) $(CPP_FILES:.cpp=.o)
+
+ARDUINOPATH = /home/paul/teensy/arduino-1.8.8
+COMPILERPATH = $(abspath $(ARDUINOPATH)/hardware/tools/arm/bin)
+CC = $(COMPILERPATH)/arm-none-eabi-gcc
+CXX = $(COMPILERPATH)/arm-none-eabi-g++
+OBJCOPY = $(COMPILERPATH)/arm-none-eabi-objcopy
+OBJDUMP = $(COMPILERPATH)/arm-none-eabi-objdump
+SIZE = $(COMPILERPATH)/arm-none-eabi-size
+AR = $(COMPILERPATH)/arm-none-eabi-gcc-ar
+
+all: Blink.elf
+
+Blink.elf: Blink.o core.a
+	$(CC) $(CPPFLAGS) $(LDFLAGS) -o $@ $^ -lm
+	#$(CC) $(CPPFLAGS) $(LDFLAGS) -o $@ Blink.o $(OBJS) -lm
+	$(OBJDUMP) -d -S -C $@ > Blink.lst
+	$(OBJDUMP) -t -C $@ > Blink.sym
+	$(OBJCOPY) -O ihex -R .eeprom $@ Blink.hex
+	$(SIZE) $@
+
+core.a: $(OBJS)
+	$(AR) rcs core.a $(OBJS)
+
+
+clean:
+	rm -f *.o *.d core.a *.elf *.lst *.sym *.hex
+

teensy4/Print.h

@@ -0,0 +1,132 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef Print_h
+#define Print_h
+
+#include <inttypes.h>
+#include <stdio.h> // for size_t - gives sprintf and other stuff to all sketches & libs
+#include <stdarg.h>
+#include "core_id.h"
+#include "WString.h"
+#include "Printable.h"
+
+#define DEC 10
+#define HEX 16
+#define OCT 8
+#define BIN 2
+
+// BYTE was defined in very old versions of Arduino
+// maybe this now causes more trouble than it's worth?
+//#ifndef BYTE
+//#define BYTE 0
+//#endif
+
+class __FlashStringHelper;
+
+class Print
+{
+  public:
+	constexpr Print() : write_error(0) {}
+	virtual size_t write(uint8_t b) = 0;
+	size_t write(const char *str)			{ return write((const uint8_t *)str, strlen(str)); }
+	virtual size_t write(const uint8_t *buffer, size_t size);
+	virtual int availableForWrite(void)		{ return 0; }
+	virtual void flush()				{ }
+	size_t write(const char *buffer, size_t size)	{ return write((const uint8_t *)buffer, size); }
+	size_t print(const String &s);
+	size_t print(char c)				{ return write((uint8_t)c); }
+	size_t print(const char s[])			{ return write(s); }
+	size_t print(const __FlashStringHelper *f)	{ return write((const char *)f); }
+
+	size_t print(uint8_t b)				{ return printNumber(b, 10, 0); }
+	size_t print(int n)				{ return print((long)n); }
+	size_t print(unsigned int n)			{ return printNumber(n, 10, 0); }
+	size_t print(long n);
+	size_t print(unsigned long n)			{ return printNumber(n, 10, 0); }
+
+	size_t print(unsigned char n, int base)		{ return printNumber(n, base, 0); }
+	size_t print(int n, int base)			{ return (base == 10) ? print(n) : printNumber(n, base, 0); }
+	size_t print(unsigned int n, int base)		{ return printNumber(n, base, 0); }
+	size_t print(long n, int base)			{ return (base == 10) ? print(n) : printNumber(n, base, 0); }
+	size_t print(unsigned long n, int base)		{ return printNumber(n, base, 0); }
+
+	size_t print(double n, int digits = 2)		{ return printFloat(n, digits); }
+	size_t print(const Printable &obj)		{ return obj.printTo(*this); }
+	size_t println(void);
+	size_t println(const String &s)			{ return print(s) + println(); }
+	size_t println(char c)				{ return print(c) + println(); }
+	size_t println(const char s[])			{ return print(s) + println(); }
+	size_t println(const __FlashStringHelper *f)	{ return print(f) + println(); }
+
+	size_t println(uint8_t b)			{ return print(b) + println(); }
+	size_t println(int n)				{ return print(n) + println(); }
+	size_t println(unsigned int n)			{ return print(n) + println(); }
+	size_t println(long n)				{ return print(n) + println(); }
+	size_t println(unsigned long n)			{ return print(n) + println(); }
+
+	size_t println(unsigned char n, int base)	{ return print(n, base) + println(); }
+	size_t println(int n, int base)			{ return print(n, base) + println(); }
+	size_t println(unsigned int n, int base)	{ return print(n, base) + println(); }
+	size_t println(long n, int base)		{ return print(n, base) + println(); }
+	size_t println(unsigned long n, int base)	{ return print(n, base) + println(); }
+
+	size_t println(double n, int digits = 2)	{ return print(n, digits) + println(); }
+	size_t println(const Printable &obj)		{ return obj.printTo(*this) + println(); }
+	int getWriteError() { return write_error; }
+	void clearWriteError() { setWriteError(0); }
+	int printf(const char *format, ...);
+	int printf(const __FlashStringHelper *format, ...);
+  protected:
+	void setWriteError(int err = 1) { write_error = err; }
+  private:
+	char write_error;
+	size_t printFloat(double n, uint8_t digits);
+#ifdef __MKL26Z64__
+	size_t printNumberDec(unsigned long n, uint8_t sign);
+	size_t printNumberHex(unsigned long n);
+	size_t printNumberBin(unsigned long n);
+	size_t printNumberAny(unsigned long n, uint8_t base);
+	inline size_t printNumber(unsigned long n, uint8_t base, uint8_t sign) __attribute__((always_inline)) {
+		// when "base" is a constant (pretty much always), the
+		// compiler optimizes this to a single function call.
+		if (base == 0) return write((uint8_t)n);
+		if (base == 10 || base < 2) return printNumberDec(n, sign);
+		if (base == 16) return printNumberHex(n);
+		if (base == 2) return printNumberBin(n);
+		return printNumberAny(n, base);
+	}
+#else
+	size_t printNumber(unsigned long n, uint8_t base, uint8_t sign);
+#endif
+};
+
+
+#endif

teensy4/Printable.h

@@ -0,0 +1,42 @@
+/*
+  Printable.h - Interface class that allows printing of complex types
+  Copyright (c) 2011 Adrian McEwen.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef Printable_h
+#define Printable_h
+
+#ifdef __cplusplus
+
+//#include "new.h"
+
+class Print;
+
+/** The Printable class provides a way for new classes to allow themselves to be printed.
+    By deriving from Printable and implementing the printTo method, it will then be possible
+    for users to print out instances of this class by passing them into the usual
+    Print::print and Print::println methods.
+*/
+class Printable
+{
+  public:
+    virtual size_t printTo(Print& p) const = 0;
+};
+
+
+#endif
+#endif

teensy4/Server.h

@@ -0,0 +1,33 @@
+/*
+  Server.h - Base class that provides Server
+  Copyright (c) 2011 Adrian McEwen.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#if ARDUINO >= 100
+
+#ifndef server_h
+#define server_h
+
+#include "Print.h"
+
+class Server : public Print {
+public:
+  virtual void begin() =0;
+};
+
+#endif
+#endif

teensy4/Stream.h

@@ -0,0 +1,73 @@
+/*
+  Stream.h - base class for character-based streams.
+  Copyright (c) 2010 David A. Mellis.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef Stream_h
+#define Stream_h
+
+#include <inttypes.h>
+#include "Print.h"
+
+class Stream : public Print
+{
+  public:
+	constexpr Stream() : _timeout(1000), read_error(0) {}
+	virtual int available() = 0;
+	virtual int read() = 0;
+	virtual int peek() = 0;
+
+	void setTimeout(unsigned long timeout);
+	bool find(const char *target);
+	bool find(const uint8_t *target) { return find ((const char *)target); }
+	bool find(const String &target) { return find(target.c_str()); }
+	bool find(const char *target, size_t length);
+	bool find(const uint8_t *target, size_t length) { return find ((const char *)target, length); }
+	bool find(const String &target, size_t length) { return find(target.c_str(), length); }
+	bool findUntil(const char *target, const char *terminator);
+	bool findUntil(const uint8_t *target, const char *terminator) { return findUntil((const char *)target, terminator); }
+	bool findUntil(const String &target, const char *terminator) { return findUntil(target.c_str(), terminator); }
+	bool findUntil(const char *target, const String &terminator) { return findUntil(target, terminator.c_str()); }
+	bool findUntil(const String &target, const String &terminator) { return findUntil(target.c_str(), terminator.c_str()); }
+	bool findUntil(const char *target, size_t targetLen, const char *terminate, size_t termLen);
+	bool findUntil(const uint8_t *target, size_t targetLen, const char *terminate, size_t termLen) {return findUntil((const char *)target, targetLen, terminate, termLen); }
+	bool findUntil(const String &target, size_t targetLen, const char *terminate, size_t termLen);
+	bool findUntil(const char *target, size_t targetLen, const String &terminate, size_t termLen);
+	bool findUntil(const String &target, size_t targetLen, const String &terminate, size_t termLen);
+	long parseInt();
+	long parseInt(char skipChar);
+	float parseFloat();
+	float parseFloat(char skipChar);
+	size_t readBytes(char *buffer, size_t length);
+	size_t readBytes(uint8_t *buffer, size_t length) { return readBytes((char *)buffer, length); }
+	size_t readBytesUntil(char terminator, char *buffer, size_t length);
+	size_t readBytesUntil(char terminator, uint8_t *buffer, size_t length) { return readBytesUntil(terminator, (char *)buffer, length); }
+	String readString(size_t max = 120);
+	String readStringUntil(char terminator, size_t max = 120);
+	int getReadError() { return read_error; }
+	void clearReadError() { setReadError(0); }
+  protected:
+	void setReadError(int err = 1) { read_error = err; }
+	unsigned long _timeout;
+  private:
+	char read_error;
+	int timedRead();
+	int timedPeek();
+	int peekNextDigit();
+};
+
+#endif

teensy4/Udp.h

@@ -0,0 +1,92 @@
+/*
+ *  Udp.cpp: Library to send/receive UDP packets.
+ *
+ * NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these)
+ * 1) UDP does not guarantee the order in which assembled UDP packets are received. This
+ * might not happen often in practice, but in larger network topologies, a UDP
+ * packet can be received out of sequence.
+ * 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being
+ * aware of it. Again, this may not be a concern in practice on small local networks.
+ * For more information, see http://www.cafeaulait.org/course/week12/35.html
+ *
+ * MIT License:
+ * Copyright (c) 2008 Bjoern Hartmann
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * bjoern@cs.stanford.edu 12/30/2008
+ */
+
+#if ARDUINO >= 100
+
+#ifndef udp_h
+#define udp_h
+
+#include <Stream.h>
+#include <IPAddress.h>
+
+class UDP : public Stream {
+
+public:
+  virtual uint8_t begin(uint16_t) =0;	// initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
+  virtual uint8_t beginMulticast(IPAddress, uint16_t) { return 0; }
+  virtual void stop() =0;  // Finish with the UDP socket
+
+  // Sending UDP packets
+
+  // Start building up a packet to send to the remote host specific in ip and port
+  // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
+  virtual int beginPacket(IPAddress ip, uint16_t port) =0;
+  // Start building up a packet to send to the remote host specific in host and port
+  // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
+  virtual int beginPacket(const char *host, uint16_t port) =0;
+  // Finish off this packet and send it
+  // Returns 1 if the packet was sent successfully, 0 if there was an error
+  virtual int endPacket() =0;
+  // Write a single byte into the packet
+  virtual size_t write(uint8_t) =0;
+  // Write size bytes from buffer into the packet
+  virtual size_t write(const uint8_t *buffer, size_t size) =0;
+
+  // Start processing the next available incoming packet
+  // Returns the size of the packet in bytes, or 0 if no packets are available
+  virtual int parsePacket() =0;
+  // Number of bytes remaining in the current packet
+  virtual int available() =0;
+  // Read a single byte from the current packet
+  virtual int read() =0;
+  // Read up to len bytes from the current packet and place them into buffer
+  // Returns the number of bytes read, or 0 if none are available
+  virtual int read(unsigned char* buffer, size_t len) =0;
+  // Read up to len characters from the current packet and place them into buffer
+  // Returns the number of characters read, or 0 if none are available
+  virtual int read(char* buffer, size_t len) =0;
+  // Return the next byte from the current packet without moving on to the next byte
+  virtual int peek() =0;
+  virtual void flush() =0;	// Finish reading the current packet
+
+  // Return the IP address of the host who sent the current incoming packet
+  virtual IPAddress remoteIP() =0;
+  // Return the port of the host who sent the current incoming packet
+  virtual uint16_t remotePort() =0;
+protected:
+  uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
+};
+
+#endif
+#endif

teensy4/WCharacter.h

@@ -0,0 +1,168 @@
+/*
+ WCharacter.h - Character utility functions for Wiring & Arduino
+ Copyright (c) 2010 Hernando Barragan.  All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef Character_h
+#define Character_h
+
+#include <ctype.h>
+
+// WCharacter.h prototypes
+inline boolean isAlphaNumeric(int c) __attribute__((always_inline));
+inline boolean isAlpha(int c) __attribute__((always_inline));
+inline boolean isAscii(int c) __attribute__((always_inline));
+inline boolean isWhitespace(int c) __attribute__((always_inline));
+inline boolean isControl(int c) __attribute__((always_inline));
+inline boolean isDigit(int c) __attribute__((always_inline));
+inline boolean isGraph(int c) __attribute__((always_inline));
+inline boolean isLowerCase(int c) __attribute__((always_inline));
+inline boolean isPrintable(int c) __attribute__((always_inline));
+inline boolean isPunct(int c) __attribute__((always_inline));
+inline boolean isSpace(int c) __attribute__((always_inline));
+inline boolean isUpperCase(int c) __attribute__((always_inline));
+inline boolean isHexadecimalDigit(int c) __attribute__((always_inline));
+inline int toAscii(int c) __attribute__((always_inline));
+inline int toLowerCase(int c) __attribute__((always_inline));
+inline int toUpperCase(int c)__attribute__((always_inline));
+
+
+// Checks for an alphanumeric character.
+// It is equivalent to (isalpha(c) || isdigit(c)).
+inline boolean isAlphaNumeric(int c)
+{
+  return ( isalnum(c) == 0 ? false : true);
+}
+
+
+// Checks for an alphabetic character.
+// It is equivalent to (isupper(c) || islower(c)).
+inline boolean isAlpha(int c)
+{
+  return ( isalpha(c) == 0 ? false : true);
+}
+
+
+// Checks whether c is a 7-bit unsigned char value
+// that fits into the ASCII character set.
+inline boolean isAscii(int c)
+{
+  return ( isascii (c) == 0 ? false : true);
+}
+
+
+// Checks for a blank character, that is, a space or a tab.
+inline boolean isWhitespace(int c)
+{
+  return ( isblank (c) == 0 ? false : true);
+}
+
+
+// Checks for a control character.
+inline boolean isControl(int c)
+{
+  return ( iscntrl (c) == 0 ? false : true);
+}
+
+
+// Checks for a digit (0 through 9).
+inline boolean isDigit(int c)
+{
+  return ( isdigit (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character except space.
+inline boolean isGraph(int c)
+{
+  return ( isgraph (c) == 0 ? false : true);
+}
+
+
+// Checks for a lower-case character.
+inline boolean isLowerCase(int c)
+{
+  return (islower (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character including space.
+inline boolean isPrintable(int c)
+{
+  return ( isprint (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character which is not a space
+// or an alphanumeric character.
+inline boolean isPunct(int c)
+{
+  return ( ispunct (c) == 0 ? false : true);
+}
+
+
+// Checks for white-space characters. For the avr-libc library,
+// these are: space, formfeed ('\f'), newline ('\n'), carriage
+// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v').
+inline boolean isSpace(int c)
+{
+  return ( isspace (c) == 0 ? false : true);
+}
+
+
+// Checks for an uppercase letter.
+inline boolean isUpperCase(int c)
+{
+  return ( isupper (c) == 0 ? false : true);
+}
+
+
+// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7
+// 8 9 a b c d e f A B C D E F.
+inline boolean isHexadecimalDigit(int c)
+{
+  return ( isxdigit (c) == 0 ? false : true);
+}
+
+
+// Converts c to a 7-bit unsigned char value that fits into the
+// ASCII character set, by clearing the high-order bits.
+inline int toAscii(int c)
+{
+  return toascii (c);
+}
+
+
+// Warning:
+// Many people will be unhappy if you use this function.
+// This function will convert accented letters into random
+// characters.
+
+// Converts the letter c to lower case, if possible.
+inline int toLowerCase(int c)
+{
+  return tolower (c);
+}
+
+
+// Converts the letter c to upper case, if possible.
+inline int toUpperCase(int c)
+{
+  return toupper (c);
+}
+
+#endif

teensy4/WProgram.h

@@ -0,0 +1,106 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef WProgram_h
+#define WProgram_h
+
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+
+// some libraries and sketches depend on this
+// AVR stuff, assuming Arduino.h or WProgram.h
+// automatically includes it...
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "avr_functions.h"
+#include "wiring.h"
+#include "HardwareSerial.h"
+
+#define DMAMEM __attribute__ ((section(".dmabuffers"), used))
+#define FASTRUN __attribute__ ((section(".fastrun"), noinline, noclone ))
+
+#ifdef __cplusplus
+
+#include "avr_emulation.h"
+#include "usb_serial.h"
+//#include "usb_seremu.h"
+//#include "usb_keyboard.h"
+//#include "usb_mouse.h"
+//#include "usb_joystick.h"
+//#include "usb_midi.h"
+//#include "usb_rawhid.h"
+//#include "usb_flightsim.h"
+//#include "usb_mtp.h"
+//#include "usb_audio.h"
+//#include "usb_touch.h"
+//#include "usb_undef.h" // do not allow usb_desc.h stuff to leak to user programs
+
+#include "WCharacter.h"
+#include "WString.h"
+#include "elapsedMillis.h"
+#include "IntervalTimer.h"
+
+uint16_t makeWord(uint16_t w);
+uint16_t makeWord(byte h, byte l);
+
+#define word(...) makeWord(__VA_ARGS__)
+
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
+
+void tone(uint8_t pin, uint16_t frequency, uint32_t duration = 0);
+void noTone(uint8_t pin);
+
+// WMath prototypes
+int32_t random(void);
+uint32_t random(uint32_t howbig);
+int32_t random(int32_t howsmall, int32_t howbig);
+void randomSeed(uint32_t newseed);
+void srandom(unsigned int newseed);
+
+#include "pins_arduino.h"
+
+#endif // __cplusplus
+
+
+// Fast memcpy
+#if defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
+#ifdef __cplusplus
+extern "C" {
+extern void *memcpy (void *dst, const void *src, size_t count);
+}
+#else
+extern void *memcpy (void *dst, const void *src, size_t count);
+#endif
+#endif
+
+
+#endif // WProgram_h

teensy4/WString.h

@@ -0,0 +1,227 @@
+/*
+  WString.h - String library for Wiring & Arduino
+  ...mostly rewritten by Paul Stoffregen...
+  Copyright (c) 2009-10 Hernando Barragan.  All right reserved.
+  Copyright 2011, Paul Stoffregen, paul@pjrc.com
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef String_class_h
+#define String_class_h
+#ifdef __cplusplus
+
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+#include "avr_functions.h"
+
+// Not needed here, but some libs assume WString.h or Print.h
+// gives them PROGMEM and other AVR stuff.
+#include "avr/pgmspace.h"
+
+// When compiling programs with this class, the following gcc parameters
+// dramatically increase performance and memory (RAM) efficiency, typically
+// with little or no increase in code size.
+//     -felide-constructors
+//     -std=c++0x
+
+// Brian Cook's "no overhead" Flash String type (message on Dec 14, 2010)
+// modified by Mikal Hart for his FlashString library
+class __FlashStringHelper;
+#ifndef F
+#define F(string_literal) ((const __FlashStringHelper *)(string_literal))
+#endif
+
+// An inherited class for holding the result of a concatenation.  These
+// result objects are assumed to be writable by subsequent concatenations.
+class StringSumHelper;
+
+// The string class
+class String
+{
+public:
+	// constructors
+	String(const char *cstr = (const char *)NULL);
+	String(const __FlashStringHelper *pgmstr);
+	String(const String &str);
+	#if __cplusplus >= 201103L || defined(__GXX_EXPERIMENTAL_CXX0X__)
+	String(String &&rval);
+	String(StringSumHelper &&rval);
+	#endif
+	String(char c);
+	String(unsigned char c);
+	String(int, unsigned char base=10);
+	String(unsigned int, unsigned char base=10);
+	String(long, unsigned char base=10);
+	String(unsigned long, unsigned char base=10);
+        String(float num, unsigned char digits=2);
+	String(double num, unsigned char digits=2) : String((float)num, digits) {}
+	~String(void);
+
+	// memory management
+	unsigned char reserve(unsigned int size);
+	inline unsigned int length(void) const {return len;}
+
+	// copy and move
+	String & copy(const char *cstr, unsigned int length);
+	String & copy(const __FlashStringHelper *s) { return copy((const char *)s, strlen((const char *)s)); }
+	void move(String &rhs);
+	String & operator = (const String &rhs);
+	String & operator = (const char *cstr);
+	String & operator = (const __FlashStringHelper *pgmstr);
+	#if __cplusplus >= 201103L || defined(__GXX_EXPERIMENTAL_CXX0X__)
+	String & operator = (String &&rval);
+	String & operator = (StringSumHelper &&rval);
+	#endif
+	String & operator = (char c);
+
+	// append
+	String & append(const String &str);
+	String & append(const char *cstr);
+	String & append(const __FlashStringHelper *s)	{return append((const char *)s, strlen((const char *)s)); }
+	String & append(char c);
+	String & append(unsigned char c)		{return append((int)c);}
+	String & append(int num);
+	String & append(unsigned int num);
+	String & append(long num);
+	String & append(unsigned long num);
+	String & append(float num);
+	String & append(double num)			{return append((float)num);}
+	String & operator += (const String &rhs)	{return append(rhs);}
+	String & operator += (const char *cstr)		{return append(cstr);}
+	String & operator += (const __FlashStringHelper *pgmstr) {return append(pgmstr);}
+	String & operator += (char c)			{return append(c);}
+	String & operator += (unsigned char c)		{return append((int)c);}
+	String & operator += (int num)			{return append(num);}
+	String & operator += (unsigned int num)		{return append(num);}
+	String & operator += (long num)			{return append(num);}
+	String & operator += (unsigned long num)	{return append(num);}
+	String & operator += (float num)		{return append(num);}
+	String & operator += (double num)		{return append(num);}
+
+	// concatenate
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, const String &rhs);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, const char *cstr);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, const __FlashStringHelper *pgmstr);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, char c);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned char c);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, int num);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned int num);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, long num);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned long num);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, float num);
+	friend StringSumHelper & operator + (const StringSumHelper &lhs, double num);
+	String & concat(const String &str)		{return append(str);}
+	String & concat(const char *cstr)		{return append(cstr);}
+	String & concat(const __FlashStringHelper *pgmstr) {return append(pgmstr);}
+	String & concat(char c)				{return append(c);}
+	String & concat(unsigned char c)		{return append((int)c);}
+	String & concat(int num)			{return append(num);}
+	String & concat(unsigned int num)		{return append(num);}
+	String & concat(long num)			{return append(num);}
+	String & concat(unsigned long num)		{return append(num);}
+	String & concat(float num)			{return append(num);}
+	String & concat(double num)			{return append(num);}
+
+	// comparison
+	int compareTo(const String &s) const;
+	unsigned char equals(const String &s) const;
+	unsigned char equals(const char *cstr) const;
+	//unsigned char equals(const __FlashStringHelper *pgmstr) const;
+	unsigned char operator == (const String &rhs) const {return equals(rhs);}
+	unsigned char operator == (const char *cstr) const {return equals(cstr);}
+	unsigned char operator == (const __FlashStringHelper *s) const {return equals((const char *)s);}
+	unsigned char operator != (const String &rhs) const {return !equals(rhs);}
+	unsigned char operator != (const char *cstr) const {return !equals(cstr);}
+	unsigned char operator != (const __FlashStringHelper *s) const {return !equals(s);}
+	unsigned char operator <  (const String &rhs) const;
+	unsigned char operator >  (const String &rhs) const;
+	unsigned char operator <= (const String &rhs) const;
+	unsigned char operator >= (const String &rhs) const;
+	unsigned char equalsIgnoreCase(const String &s) const;
+	unsigned char startsWith( const String &prefix) const;
+	unsigned char startsWith(const String &prefix, unsigned int offset) const;
+	unsigned char endsWith(const String &suffix) const;
+
+	// character acccess
+	char charAt(unsigned int index) const;
+	void setCharAt(unsigned int index, char c);
+	char operator [] (unsigned int index) const;
+	char& operator [] (unsigned int index);
+	void getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index=0) const;
+	void toCharArray(char *buf, unsigned int bufsize, unsigned int index=0) const
+		{getBytes((unsigned char *)buf, bufsize, index);}
+	const char * c_str() const { return buffer; }
+
+	// search
+	int indexOf( char ch ) const;
+	int indexOf( char ch, unsigned int fromIndex ) const;
+	int indexOf( const String &str ) const;
+	int indexOf( const String &str, unsigned int fromIndex ) const;
+	int lastIndexOf( char ch ) const;
+	int lastIndexOf( char ch, unsigned int fromIndex ) const;
+	int lastIndexOf( const String &str ) const;
+	int lastIndexOf( const String &str, unsigned int fromIndex ) const;
+	String substring( unsigned int beginIndex ) const;
+	String substring( unsigned int beginIndex, unsigned int endIndex ) const;
+
+	// modification
+	String & replace(char find, char replace);
+	String & replace(const String& find, const String& replace);
+	String & remove(unsigned int index);
+	String & remove(unsigned int index, unsigned int count);
+	String & toLowerCase(void);
+	String & toUpperCase(void);
+	String & trim(void);
+
+	// parsing/conversion
+	long toInt(void) const;
+	float toFloat(void) const;
+
+protected:
+	char *buffer;	        // the actual char array
+	unsigned int capacity;  // the array length minus one (for the '\0')
+	unsigned int len;       // the String length (not counting the '\0')
+	unsigned char flags;    // unused, for future features
+protected:
+	void init(void);
+	unsigned char changeBuffer(unsigned int maxStrLen);
+	String & append(const char *cstr, unsigned int length);
+private:
+	// allow for "if (s)" without the complications of an operator bool().
+	// for more information http://www.artima.com/cppsource/safebool.html
+	typedef void (String::*StringIfHelperType)() const;
+	void StringIfHelper() const {}
+public:
+	operator StringIfHelperType() const { return buffer ? &String::StringIfHelper : 0; }
+};
+
+class StringSumHelper : public String
+{
+public:
+	StringSumHelper(const String &s) : String(s) {}
+	StringSumHelper(const char *p) : String(p) {}
+	StringSumHelper(const __FlashStringHelper *pgmstr) : String(pgmstr) {}
+	StringSumHelper(char c) : String(c) {}
+	StringSumHelper(unsigned char c) : String(c) {}
+	StringSumHelper(int num) : String(num, 10) {}
+	StringSumHelper(unsigned int num) : String(num, 10) {}
+	StringSumHelper(long num) : String(num, 10) {}
+	StringSumHelper(unsigned long num) : String(num, 10) {}
+};
+
+#endif  // __cplusplus
+#endif  // String_class_h

teensy4/avr/interrupt.h

@@ -0,0 +1 @@
+// This header file is in the public domain.

teensy4/avr/io.h

@@ -0,0 +1,23 @@
+/* Simple compatibility headers for AVR code used with ARM chips
+ * Copyright (c) 2015 Paul Stoffregen <paul@pjrc.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "../avr_emulation.h"

teensy4/avr/pgmspace.h

@@ -0,0 +1,131 @@
+/* Simple compatibility headers for AVR code used with NXP IMXRT chips
+ * Copyright (c) 2018 Paul Stoffregen <paul@pjrc.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef __PGMSPACE_H_
+#define __PGMSPACE_H_ 1
+
+#include <inttypes.h>
+
+#define PROGMEM __attribute__((section(".progmem")))
+#define PGM_P  const char *
+#define PSTR(str) ({static const char data[] PROGMEM = (str); &data[0];})
+
+#define _SFR_BYTE(n) (n)
+
+typedef void prog_void;
+typedef char prog_char;
+typedef unsigned char prog_uchar;
+typedef int8_t prog_int8_t;
+typedef uint8_t prog_uint8_t;
+typedef int16_t prog_int16_t;
+typedef uint16_t prog_uint16_t;
+typedef int32_t prog_int32_t;
+typedef uint32_t prog_uint32_t;
+typedef int64_t prog_int64_t;
+typedef uint64_t prog_uint64_t;
+
+#define memchr_P(str, c, len) memchr((str), (c), (len))
+#define memcmp_P(a, b, n) memcmp((a), (b), (n))
+#define memcpy_P(dest, src, num) memcpy((dest), (src), (num))
+#define memmem_P(a, alen, b, blen) memmem((a), (alen), (b), (blen))
+#define memrchr_P(str, val, len) memrchr((str), (val), (len))
+#define strcat_P(dest, src) strcat((dest), (src))
+#define strchr_P(str, c) strchr((str), (c))
+#define strchrnul_P(str, c) strchrnul((str), (c))
+#define strcmp_P(a, b) strcmp((a), (b))
+#define strcpy_P(dest, src) strcpy((dest), (src))
+#define strcasecmp_P(a, b) strcasecmp((a), (b))
+#define strcasestr_P(a, b) strcasestr((a), (b))
+#define strlcat_P(dest, src, len) strlcat((dest), (src), (len))
+#define strlcpy_P(dest, src, len) strlcpy((dest), (src), (len))
+#define strlen_P(s) strlen((const char *)(s))
+#define strnlen_P(str, len) strnlen((str), (len))
+#define strncmp_P(a, b, n) strncmp((a), (b), (n))
+#define strncasecmp_P(a, b, n) strncasecmp((a), (b), (n))
+#define strncat_P(a, b, n) strncat((a), (b), (n))
+#define strncpy_P(a, b, n) strncpy((a), (b), (n))
+#define strpbrk_P(str, chrs) strpbrk((str), (chrs))
+#define strrchr_P(str, c) strrchr((str), (c))
+#define strsep_P(strp, delim) strsep((strp), (delim))
+#define strspn_P(str, chrs) strspn((str), (chrs))
+#define strstr_P(a, b) strstr((a), (b))
+#define sprintf_P(s, ...) sprintf((s), __VA_ARGS__)
+#define vfprintf_P(fp, s, ...) vfprintf((fp), (s), __VA_ARGS__)
+#define printf_P(...) printf(__VA_ARGS__)
+#define snprintf_P(s, n, ...) snprintf((s), (n), __VA_ARGS__)
+#define vsprintf_P(s, ...) vsprintf((s), __VA_ARGS__)
+#define vsnprintf_P(s, n, ...) vsnprintf((s), (n), __VA_ARGS__)
+#define fprintf_P(fp, ...) fprintf((fp), __VA_ARGS__)
+#define strlen_PF(a) strlen((a))
+#define strnlen_PF(src, len) strnlen((src), (len))
+#define memcpy_PF(dest, src, len) memcpy((dest), (src), (len))
+#define strcpy_PF(dest, src) strcpy((dest), (src))
+#define strncpy_PF(dest, src, len) strncpy((dest), (src), (len))
+#define strcat_PF(dest, src) strcat((dest), (src))
+#define strlcat_PF(dest, src, len) strlcat((dest), (src), (len))
+#define strncat_PF(dest, src, len) strncat((dest), (src), (len))
+#define strcmp_PF(s1, s2) strcmp((s1), (s2))
+#define strncmp_PF(s1, s2, n) strncmp((s1), (s2), (n))
+#define strcasecmp_PF(s1, s2) strcasecmp((s1), (s2))
+#define strncasecmp_PF(s1, s2, n) strncasecmp((s1), (s2), (n))
+#define strstr_PF(s1, s2) strstr((s1), (s2))
+#define strlcpy_PF(dest, src, n) strlcpy((dest), (src), (n))
+#define memcmp_PF(s1, s2, n) memcmp((s1), (s2), (n))
+
+
+#define pgm_read_byte(addr) (*(const unsigned char *)(addr))
+#if 0
+#define pgm_read_word(addr) (*(const unsigned short *)(addr))
+#define pgm_read_dword(addr) (*(const unsigned long *)(addr))
+#define pgm_read_float(addr) (*(const float *)(addr))
+#else
+#define pgm_read_word(addr) ({ \
+	typeof(addr) _addr = (addr); \
+	*(const unsigned short *)(_addr); \
+})
+#define pgm_read_dword(addr) ({ \
+	typeof(addr) _addr = (addr); \
+	*(const unsigned long *)(_addr); \
+})
+#define pgm_read_float(addr) ({ \
+	typeof(addr) _addr = (addr); \
+	*(const float *)(_addr); \
+})
+#define pgm_read_ptr(addr) ({ \
+	typeof(addr) _addr = (addr); \
+	*(void * const *)(_addr); \
+})
+#endif
+
+
+#define pgm_read_byte_near(addr) pgm_read_byte(addr)
+#define pgm_read_word_near(addr) pgm_read_word(addr)
+#define pgm_read_dword_near(addr) pgm_read_dword(addr)
+#define pgm_read_float_near(addr) pgm_read_float(addr)
+#define pgm_read_ptr_near(addr) pgm_read_ptr(addr)
+#define pgm_read_byte_far(addr) pgm_read_byte(addr)
+#define pgm_read_word_far(addr) pgm_read_word(addr)
+#define pgm_read_dword_far(addr) pgm_read_dword(addr)
+#define pgm_read_float_far(addr) pgm_read_float(addr)
+#define pgm_read_ptr_far(addr) pgm_read_ptr(addr)
+
+#endif

teensy4/avr/power.h

@@ -0,0 +1,26 @@
+/* Simple compatibility headers for AVR code used with ARM chips
+ * Copyright (c) 2015 Paul Stoffregen <paul@pjrc.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _AVR_POWER_H_
+#define _AVR_POWER_H_   1
+
+#endif

teensy4/avr/sleep.h

@@ -0,0 +1,46 @@
+/* Simple compatibility headers for AVR code used with ARM chips
+ * Copyright (c) 2015 Paul Stoffregen <paul@pjrc.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _AVR_SLEEP_H_
+#define _AVR_SLEEP_H_ 1
+
+#define SLEEP_MODE_IDLE         0
+#define SLEEP_MODE_ADC		0
+#define SLEEP_MODE_PWR_DOWN	1
+#define SLEEP_MODE_PWR_SAVE	1
+#define SLEEP_MODE_STANDBY	1
+#define SLEEP_MODE_EXT_STANDBY	1
+
+#define set_sleep_mode(mode)	// TODO: actually set the mode...
+#define sleep_enable()
+#define sleep_disable()
+#define sleep_cpu()		({__asm__ volatile("wfi");})
+#define sleep_bod_disable()
+#define sleep_mode()		({__asm__ volatile("wfi");})
+
+// workaround for early versions of Nordic's BLE library
+// EIMSK moved to a dummy byte in avr_emulation...
+//#if defined(HAL_ACI_TL_H__) && defined(PLATFORM_H__)
+//#define EIMSK uint8_t EIMSKworkaround=0; EIMSKworkaround
+//#endif
+
+#endif

teensy4/avr/wdt.h

@@ -0,0 +1,21 @@
+// This header file is in the public domain.
+
+#ifndef _AVR_WDT_H_
+#define _AVR_WDT_H_
+
+#define WDTO_15MS   0
+#define WDTO_30MS   1
+#define WDTO_60MS   2
+#define WDTO_120MS  3
+#define WDTO_250MS  4
+#define WDTO_500MS  5
+#define WDTO_1S     6
+#define WDTO_2S     7
+#define WDTO_4S     8
+#define WDTO_8S     9
+
+#define wdt_reset()
+#define wdt_enable(timeout)
+#define wdt_disable()
+
+#endif

teensy4/avr_functions.h

@@ -0,0 +1,113 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _avr_functions_h_
+#define _avr_functions_h_
+
+#include <inttypes.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void eeprom_initialize(void);
+uint8_t eeprom_read_byte(const uint8_t *addr) __attribute__ ((pure));
+uint16_t eeprom_read_word(const uint16_t *addr) __attribute__ ((pure));
+uint32_t eeprom_read_dword(const uint32_t *addr) __attribute__ ((pure));
+void eeprom_read_block(void *buf, const void *addr, uint32_t len);
+void eeprom_write_byte(uint8_t *addr, uint8_t value);
+void eeprom_write_word(uint16_t *addr, uint16_t value);
+void eeprom_write_dword(uint32_t *addr, uint32_t value);
+void eeprom_write_block(const void *buf, void *addr, uint32_t len);
+int eeprom_is_ready(void);
+#define eeprom_busy_wait() do {} while (!eeprom_is_ready())
+
+/*
+static inline float eeprom_read_float(const float *addr) __attribute__((pure, always_inline, unused));
+static inline float eeprom_read_float(const float *addr)
+{
+	union {float f; uint32_t u32;} u;
+	u.u32 = eeprom_read_dword((const uint32_t *)addr);
+	return u.f;
+}
+static inline void eeprom_write_float(float *addr, float value) __attribute__((always_inline, unused));
+static inline void eeprom_write_float(float *addr, float value)
+{
+	union {float f; uint32_t u32;} u;
+	u.f = value;
+	eeprom_write_dword((uint32_t *)addr, u.u32);
+}
+static inline void eeprom_update_byte(uint8_t *addr, uint8_t value) __attribute__((always_inline, unused));
+static inline void eeprom_update_byte(uint8_t *addr, uint8_t value)
+{
+	eeprom_write_byte(addr, value);
+}
+static inline void eeprom_update_word(uint16_t *addr, uint16_t value) __attribute__((always_inline, unused));
+static inline void eeprom_update_word(uint16_t *addr, uint16_t value)
+{
+	eeprom_write_word(addr, value);
+}
+static inline void eeprom_update_dword(uint32_t *addr, uint32_t value) __attribute__((always_inline, unused));
+static inline void eeprom_update_dword(uint32_t *addr, uint32_t value)
+{
+	eeprom_write_dword(addr, value);
+}
+static inline void eeprom_update_float(float *addr, float value) __attribute__((always_inline, unused));
+static inline void eeprom_update_float(float *addr, float value)
+{
+	union {float f; uint32_t u32;} u;
+	u.f = value;
+	eeprom_write_dword((uint32_t *)addr, u.u32);
+}
+static inline void eeprom_update_block(const void *buf, void *addr, uint32_t len) __attribute__((always_inline, unused));
+static inline void eeprom_update_block(const void *buf, void *addr, uint32_t len)
+{
+	eeprom_write_block(buf, addr, len);
+}
+*/
+
+
+char * ultoa(unsigned long val, char *buf, int radix);
+char * ltoa(long val, char *buf, int radix);
+
+#if defined(_NEWLIB_VERSION) && (__NEWLIB__ < 2 || __NEWLIB__ == 2 && __NEWLIB_MINOR__ < 2)
+static inline char * utoa(unsigned int val, char *buf, int radix) __attribute__((always_inline, unused));
+static inline char * utoa(unsigned int val, char *buf, int radix) { return ultoa(val, buf, radix); }
+static inline char * itoa(int val, char *buf, int radix) __attribute__((always_inline, unused));
+static inline char * itoa(int val, char *buf, int radix) { return ltoa(val, buf, radix); }
+#endif
+
+char * dtostrf(float val, int width, unsigned int precision, char *buf);
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif

teensy4/binary.h

@@ -0,0 +1,517 @@
+// This header file is in the public domain.
+
+#ifndef Binary_h
+#define Binary_h
+
+#define B0 0
+#define B00 0
+#define B000 0
+#define B0000 0
+#define B00000 0
+#define B000000 0
+#define B0000000 0
+#define B00000000 0
+#define B1 1
+#define B01 1
+#define B001 1
+#define B0001 1
+#define B00001 1
+#define B000001 1
+#define B0000001 1
+#define B00000001 1
+#define B10 2
+#define B010 2
+#define B0010 2
+#define B00010 2
+#define B000010 2
+#define B0000010 2
+#define B00000010 2
+#define B11 3
+#define B011 3
+#define B0011 3
+#define B00011 3
+#define B000011 3
+#define B0000011 3
+#define B00000011 3
+#define B100 4
+#define B0100 4
+#define B00100 4
+#define B000100 4
+#define B0000100 4
+#define B00000100 4
+#define B101 5
+#define B0101 5
+#define B00101 5
+#define B000101 5
+#define B0000101 5
+#define B00000101 5
+#define B110 6
+#define B0110 6
+#define B00110 6
+#define B000110 6
+#define B0000110 6
+#define B00000110 6
+#define B111 7
+#define B0111 7
+#define B00111 7
+#define B000111 7
+#define B0000111 7
+#define B00000111 7
+#define B1000 8
+#define B01000 8
+#define B001000 8
+#define B0001000 8
+#define B00001000 8
+#define B1001 9
+#define B01001 9
+#define B001001 9
+#define B0001001 9
+#define B00001001 9
+#define B1010 10
+#define B01010 10
+#define B001010 10
+#define B0001010 10
+#define B00001010 10
+#define B1011 11
+#define B01011 11
+#define B001011 11
+#define B0001011 11
+#define B00001011 11
+#define B1100 12
+#define B01100 12
+#define B001100 12
+#define B0001100 12
+#define B00001100 12
+#define B1101 13
+#define B01101 13
+#define B001101 13
+#define B0001101 13
+#define B00001101 13
+#define B1110 14
+#define B01110 14
+#define B001110 14
+#define B0001110 14
+#define B00001110 14
+#define B1111 15
+#define B01111 15
+#define B001111 15
+#define B0001111 15
+#define B00001111 15
+#define B10000 16
+#define B010000 16
+#define B0010000 16
+#define B00010000 16
+#define B10001 17
+#define B010001 17
+#define B0010001 17
+#define B00010001 17
+#define B10010 18
+#define B010010 18
+#define B0010010 18
+#define B00010010 18
+#define B10011 19
+#define B010011 19
+#define B0010011 19
+#define B00010011 19
+#define B10100 20
+#define B010100 20
+#define B0010100 20
+#define B00010100 20
+#define B10101 21
+#define B010101 21
+#define B0010101 21
+#define B00010101 21
+#define B10110 22
+#define B010110 22
+#define B0010110 22
+#define B00010110 22
+#define B10111 23
+#define B010111 23
+#define B0010111 23
+#define B00010111 23
+#define B11000 24
+#define B011000 24
+#define B0011000 24
+#define B00011000 24
+#define B11001 25
+#define B011001 25
+#define B0011001 25
+#define B00011001 25
+#define B11010 26
+#define B011010 26
+#define B0011010 26
+#define B00011010 26
+#define B11011 27
+#define B011011 27
+#define B0011011 27
+#define B00011011 27
+#define B11100 28
+#define B011100 28
+#define B0011100 28
+#define B00011100 28
+#define B11101 29
+#define B011101 29
+#define B0011101 29
+#define B00011101 29
+#define B11110 30
+#define B011110 30
+#define B0011110 30
+#define B00011110 30
+#define B11111 31
+#define B011111 31
+#define B0011111 31
+#define B00011111 31
+#define B100000 32
+#define B0100000 32
+#define B00100000 32
+#define B100001 33
+#define B0100001 33
+#define B00100001 33
+#define B100010 34
+#define B0100010 34
+#define B00100010 34
+#define B100011 35
+#define B0100011 35
+#define B00100011 35
+#define B100100 36
+#define B0100100 36
+#define B00100100 36
+#define B100101 37
+#define B0100101 37
+#define B00100101 37
+#define B100110 38
+#define B0100110 38
+#define B00100110 38
+#define B100111 39
+#define B0100111 39
+#define B00100111 39
+#define B101000 40
+#define B0101000 40
+#define B00101000 40
+#define B101001 41
+#define B0101001 41
+#define B00101001 41
+#define B101010 42
+#define B0101010 42
+#define B00101010 42
+#define B101011 43
+#define B0101011 43
+#define B00101011 43
+#define B101100 44
+#define B0101100 44
+#define B00101100 44
+#define B101101 45
+#define B0101101 45
+#define B00101101 45
+#define B101110 46
+#define B0101110 46
+#define B00101110 46
+#define B101111 47
+#define B0101111 47
+#define B00101111 47
+#define B110000 48
+#define B0110000 48
+#define B00110000 48
+#define B110001 49
+#define B0110001 49
+#define B00110001 49
+#define B110010 50
+#define B0110010 50
+#define B00110010 50
+#define B110011 51
+#define B0110011 51
+#define B00110011 51
+#define B110100 52
+#define B0110100 52
+#define B00110100 52
+#define B110101 53
+#define B0110101 53
+#define B00110101 53
+#define B110110 54
+#define B0110110 54
+#define B00110110 54
+#define B110111 55
+#define B0110111 55
+#define B00110111 55
+#define B111000 56
+#define B0111000 56
+#define B00111000 56
+#define B111001 57
+#define B0111001 57
+#define B00111001 57
+#define B111010 58
+#define B0111010 58
+#define B00111010 58
+#define B111011 59
+#define B0111011 59
+#define B00111011 59
+#define B111100 60
+#define B0111100 60
+#define B00111100 60
+#define B111101 61
+#define B0111101 61
+#define B00111101 61
+#define B111110 62
+#define B0111110 62
+#define B00111110 62
+#define B111111 63
+#define B0111111 63
+#define B00111111 63
+#define B1000000 64
+#define B01000000 64
+#define B1000001 65
+#define B01000001 65
+#define B1000010 66
+#define B01000010 66
+#define B1000011 67
+#define B01000011 67
+#define B1000100 68
+#define B01000100 68
+#define B1000101 69
+#define B01000101 69
+#define B1000110 70
+#define B01000110 70
+#define B1000111 71
+#define B01000111 71
+#define B1001000 72
+#define B01001000 72
+#define B1001001 73
+#define B01001001 73
+#define B1001010 74
+#define B01001010 74
+#define B1001011 75
+#define B01001011 75
+#define B1001100 76
+#define B01001100 76
+#define B1001101 77
+#define B01001101 77
+#define B1001110 78
+#define B01001110 78
+#define B1001111 79
+#define B01001111 79
+#define B1010000 80
+#define B01010000 80
+#define B1010001 81
+#define B01010001 81
+#define B1010010 82
+#define B01010010 82
+#define B1010011 83
+#define B01010011 83
+#define B1010100 84
+#define B01010100 84
+#define B1010101 85
+#define B01010101 85
+#define B1010110 86
+#define B01010110 86
+#define B1010111 87
+#define B01010111 87
+#define B1011000 88
+#define B01011000 88
+#define B1011001 89
+#define B01011001 89
+#define B1011010 90
+#define B01011010 90
+#define B1011011 91
+#define B01011011 91
+#define B1011100 92
+#define B01011100 92
+#define B1011101 93
+#define B01011101 93
+#define B1011110 94
+#define B01011110 94
+#define B1011111 95
+#define B01011111 95
+#define B1100000 96
+#define B01100000 96
+#define B1100001 97
+#define B01100001 97
+#define B1100010 98
+#define B01100010 98
+#define B1100011 99
+#define B01100011 99
+#define B1100100 100
+#define B01100100 100
+#define B1100101 101
+#define B01100101 101
+#define B1100110 102
+#define B01100110 102
+#define B1100111 103
+#define B01100111 103
+#define B1101000 104
+#define B01101000 104
+#define B1101001 105
+#define B01101001 105
+#define B1101010 106
+#define B01101010 106
+#define B1101011 107
+#define B01101011 107
+#define B1101100 108
+#define B01101100 108
+#define B1101101 109
+#define B01101101 109
+#define B1101110 110
+#define B01101110 110
+#define B1101111 111
+#define B01101111 111
+#define B1110000 112
+#define B01110000 112
+#define B1110001 113
+#define B01110001 113
+#define B1110010 114
+#define B01110010 114
+#define B1110011 115
+#define B01110011 115
+#define B1110100 116
+#define B01110100 116
+#define B1110101 117
+#define B01110101 117
+#define B1110110 118
+#define B01110110 118
+#define B1110111 119
+#define B01110111 119
+#define B1111000 120
+#define B01111000 120
+#define B1111001 121
+#define B01111001 121
+#define B1111010 122
+#define B01111010 122
+#define B1111011 123
+#define B01111011 123
+#define B1111100 124
+#define B01111100 124
+#define B1111101 125
+#define B01111101 125
+#define B1111110 126
+#define B01111110 126
+#define B1111111 127
+#define B01111111 127
+#define B10000000 128
+#define B10000001 129
+#define B10000010 130
+#define B10000011 131
+#define B10000100 132
+#define B10000101 133
+#define B10000110 134
+#define B10000111 135
+#define B10001000 136
+#define B10001001 137
+#define B10001010 138
+#define B10001011 139
+#define B10001100 140
+#define B10001101 141
+#define B10001110 142
+#define B10001111 143
+#define B10010000 144
+#define B10010001 145
+#define B10010010 146
+#define B10010011 147
+#define B10010100 148
+#define B10010101 149
+#define B10010110 150
+#define B10010111 151
+#define B10011000 152
+#define B10011001 153
+#define B10011010 154
+#define B10011011 155
+#define B10011100 156
+#define B10011101 157
+#define B10011110 158
+#define B10011111 159
+#define B10100000 160
+#define B10100001 161
+#define B10100010 162
+#define B10100011 163
+#define B10100100 164
+#define B10100101 165
+#define B10100110 166
+#define B10100111 167
+#define B10101000 168
+#define B10101001 169
+#define B10101010 170
+#define B10101011 171
+#define B10101100 172
+#define B10101101 173
+#define B10101110 174
+#define B10101111 175
+#define B10110000 176
+#define B10110001 177
+#define B10110010 178
+#define B10110011 179
+#define B10110100 180
+#define B10110101 181
+#define B10110110 182
+#define B10110111 183
+#define B10111000 184
+#define B10111001 185
+#define B10111010 186
+#define B10111011 187
+#define B10111100 188
+#define B10111101 189
+#define B10111110 190
+#define B10111111 191
+#define B11000000 192
+#define B11000001 193
+#define B11000010 194
+#define B11000011 195
+#define B11000100 196
+#define B11000101 197
+#define B11000110 198
+#define B11000111 199
+#define B11001000 200
+#define B11001001 201
+#define B11001010 202
+#define B11001011 203
+#define B11001100 204
+#define B11001101 205
+#define B11001110 206
+#define B11001111 207
+#define B11010000 208
+#define B11010001 209
+#define B11010010 210
+#define B11010011 211
+#define B11010100 212
+#define B11010101 213
+#define B11010110 214
+#define B11010111 215
+#define B11011000 216
+#define B11011001 217
+#define B11011010 218
+#define B11011011 219
+#define B11011100 220
+#define B11011101 221
+#define B11011110 222
+#define B11011111 223
+#define B11100000 224
+#define B11100001 225
+#define B11100010 226
+#define B11100011 227
+#define B11100100 228
+#define B11100101 229
+#define B11100110 230
+#define B11100111 231
+#define B11101000 232
+#define B11101001 233
+#define B11101010 234
+#define B11101011 235
+#define B11101100 236
+#define B11101101 237
+#define B11101110 238
+#define B11101111 239
+#define B11110000 240
+#define B11110001 241
+#define B11110010 242
+#define B11110011 243
+#define B11110100 244
+#define B11110101 245
+#define B11110110 246
+#define B11110111 247
+#define B11111000 248
+#define B11111001 249
+#define B11111010 250
+#define B11111011 251
+#define B11111100 252
+#define B11111101 253
+#define B11111110 254
+#define B11111111 255
+
+#endif

teensy4/bootdata.c

@@ -0,0 +1,202 @@
+//#include "imxrt.h"
+
+#include <stdint.h>
+
+extern void ResetHandler(void);
+extern unsigned long _estack;
+extern unsigned long _flashimagelen;
+
+__attribute__ ((section(".vectors"), used))
+const uint32_t vector_table[2] = {
+	(uint32_t)&_estack,
+	(uint32_t)&ResetHandler
+};
+
+
+__attribute__ ((section(".bootdata"), used))
+const uint32_t BootData[3] = {
+	0x60000000,
+	(uint32_t)&_flashimagelen,
+	0
+};
+
+
+__attribute__ ((section(".ivt"), used))
+const uint32_t ImageVectorTable[8] = {
+	0x402000D1,		// header
+	(uint32_t)vector_table, // docs are wrong, needs to be vec table, not start addr
+	0,			// reserved
+	0,			// dcd
+	(uint32_t)BootData,	// abs address of boot data
+	(uint32_t)ImageVectorTable, // self
+	0,			// command sequence file
+	0			// reserved
+};
+
+__attribute__ ((section(".flashconfig"), used))
+uint32_t FlexSPI_NOR_Config[128] = {
+	// 448 byte common FlexSPI configuration block , 8.6.3 page 342
+	// MCU_Flashloader_Reference_Manual.pdf, 8.2.1, Table 8-2, page 72-75
+	0x42464346,		// Tag				0x00
+	0x56010000,		// Version
+	0,			// reserved
+	0x00030301,		// columnAdressWidth,dataSetupTime,dataHoldTime,readSampleClkSrc
+
+	0x00000000,		// waitTimeCfgCommands,-,deviceModeCfgEnable
+	0,			// deviceModeSeq
+	0, 			// deviceModeArg
+	0x00000000,		// -,-,-,configCmdEnable
+
+	0,			// configCmdSeqs		0x20
+	0,
+	0,
+	0,
+
+	0,			// cfgCmdArgs			0x30
+	0,
+	0,
+	0,
+
+	0x00000000,		// controllerMiscOption		0x40
+	0x00060401,		// lutCustomSeqEnable,serialClkFreq,sflashPadType,deviceType
+	0,			// reserved
+	0,			// reserved
+
+	0x00200000,		// sflashA1Size			0x50
+	0,			// sflashA2Size
+	0,			// sflashB1Size
+	0,			// sflashB2Size
+
+	0,			// csPadSettingOverride		0x60
+	0,			// sclkPadSettingOverride
+	0,			// dataPadSettingOverride
+	0,			// dqsPadSettingOverride
+
+	0,			// timeoutInMs			0x70
+	0,			// commandInterval
+	0,			// dataValidTime
+	0x00000000,		// busyBitPolarity,busyOffset
+
+	0x0A1804EB,		// lookupTable[0]		0x80
+	0x26043206,		// lookupTable[1]
+	0,			// lookupTable[2]
+	0,			// lookupTable[3]
+
+	0x24040405,		// lookupTable[4]		0x90
+	0,			// lookupTable[5]
+	0,			// lookupTable[6]
+	0,			// lookupTable[7]
+
+	0,			// lookupTable[8]		0xA0
+	0,			// lookupTable[9]
+	0,			// lookupTable[10]
+	0,			// lookupTable[11]
+
+	0x00000406,		// lookupTable[12]		0xB0
+	0,			// lookupTable[13]
+	0,			// lookupTable[14]
+	0,			// lookupTable[15]
+
+	0,			// lookupTable[16]		0xC0
+	0,			// lookupTable[17]
+	0,			// lookupTable[18]
+	0,			// lookupTable[19]
+
+	0x08180420,		// lookupTable[20]		0xD0
+	0,			// lookupTable[21]
+	0,			// lookupTable[22]
+	0,			// lookupTable[23]
+
+	0,			// lookupTable[24]		0xE0
+	0,			// lookupTable[25]
+	0,			// lookupTable[26]
+	0,			// lookupTable[27]
+
+	0,			// lookupTable[28]		0xF0
+	0,			// lookupTable[29]
+	0,			// lookupTable[30]
+	0,			// lookupTable[31]
+
+	0x081804D8,		// lookupTable[32]		0x100
+	0,			// lookupTable[33]
+	0,			// lookupTable[34]
+	0,			// lookupTable[35]
+
+	0x08180402,		// lookupTable[36]		0x110
+	0x00002004,		// lookupTable[37]
+	0,			// lookupTable[38]
+	0,			// lookupTable[39]
+
+	0,			// lookupTable[40]		0x120
+	0,			// lookupTable[41]
+	0,			// lookupTable[42]
+	0,			// lookupTable[43]
+
+	0x00000460,		// lookupTable[44]		0x130
+	0,			// lookupTable[45]
+	0,			// lookupTable[46]
+	0,			// lookupTable[47]
+
+	0,			// lookupTable[48]		0x140
+	0,			// lookupTable[49]
+	0,			// lookupTable[50]
+	0,			// lookupTable[51]
+
+	0,			// lookupTable[52]		0x150
+	0,			// lookupTable[53]
+	0,			// lookupTable[54]
+	0,			// lookupTable[55]
+
+	0,			// lookupTable[56]		0x160
+	0,			// lookupTable[57]
+	0,			// lookupTable[58]
+	0,			// lookupTable[59]
+
+	0,			// lookupTable[60]		0x170
+	0,			// lookupTable[61]
+	0,			// lookupTable[62]
+	0,			// lookupTable[63]
+
+	0,			// LUT 0: Read			0x180
+	0,			// LUT 1: ReadStatus
+	0,			// LUT 3: WriteEnable
+	0,			// LUT 5: EraseSector
+
+	0,			// LUT 9: PageProgram		0x190
+	0,			// LUT 11: ChipErase
+	0,			// LUT 15: Dummy
+	0,			// LUT unused?
+
+	0,			// LUT unused?			0x1A0
+	0,			// LUT unused?
+	0,			// LUT unused?
+	0,			// LUT unused?
+
+	0,			// reserved			0x1B0
+	0,			// reserved
+	0,			// reserved
+	0,			// reserved
+
+	// 64 byte Serial NOR configuration block, 8.6.3.2, page 346
+
+	256,			// pageSize			0x1C0
+	4096,			// sectorSize
+	1,			// ipCmdSerialClkFreq
+	0,			// reserved
+
+	0x00010000,		// block size			0x1D0
+	0,			// reserved
+	0,			// reserved
+	0,			// reserved
+
+	0,			// reserved			0x1E0
+	0,			// reserved
+	0,			// reserved
+	0,			// reserved
+
+	0,			// reserved			0x1F0
+	0,			// reserved
+	0,			// reserved
+	0			// reserved
+};
+

teensy4/core_id.h

@@ -0,0 +1,5 @@
+// This header file is in the public domain.
+
+#ifndef CORE_TEENSY
+#define CORE_TEENSY
+#endif

teensy4/core_pins.h

@@ -0,0 +1,722 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2018 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#pragma once
+#include "imxrt.h"
+#include "pins_arduino.h"
+
+#define HIGH			1
+#define LOW			0
+#define INPUT			0
+#define OUTPUT			1
+#define INPUT_PULLUP		2
+#define INPUT_PULLDOWN		3
+#define OUTPUT_OPENDRAIN	4
+#define INPUT_DISABLE		5
+#define LSBFIRST		0
+#define MSBFIRST		1
+#define _BV(n)			(1<<(n))
+#define CHANGE			4
+#define FALLING			2
+#define RISING			3
+
+#define CORE_NUM_TOTAL_PINS	34
+#define CORE_NUM_DIGITAL	34
+#define CORE_NUM_INTERRUPT	34
+#define CORE_NUM_ANALOG		14
+#define CORE_NUM_PWM		27
+
+#define CORE_PIN0_BIT		3
+#define CORE_PIN1_BIT		2
+#define CORE_PIN2_BIT		4
+#define CORE_PIN3_BIT		5
+#define CORE_PIN4_BIT		6
+#define CORE_PIN5_BIT		7
+#define CORE_PIN6_BIT		17
+#define CORE_PIN7_BIT		16
+#define CORE_PIN8_BIT		10
+#define CORE_PIN9_BIT		11
+#define CORE_PIN10_BIT		0
+#define CORE_PIN11_BIT		2
+#define CORE_PIN12_BIT		1
+#define CORE_PIN13_BIT		3
+#define CORE_PIN14_BIT		18
+#define CORE_PIN15_BIT		19
+#define CORE_PIN16_BIT		23
+#define CORE_PIN17_BIT		22
+#define CORE_PIN18_BIT		17
+#define CORE_PIN19_BIT		16
+#define CORE_PIN20_BIT		26
+#define CORE_PIN21_BIT		27
+#define CORE_PIN22_BIT		24
+#define CORE_PIN23_BIT		25
+#define CORE_PIN24_BIT		12
+#define CORE_PIN25_BIT		13
+#define CORE_PIN26_BIT		30
+#define CORE_PIN27_BIT		31
+#define CORE_PIN28_BIT		18
+#define CORE_PIN29_BIT		31
+#define CORE_PIN30_BIT		24
+#define CORE_PIN31_BIT		23
+#define CORE_PIN32_BIT		12
+#define CORE_PIN33_BIT		8
+
+#define CORE_PIN0_BITMASK	(1<<(CORE_PIN0_BIT))
+#define CORE_PIN1_BITMASK	(1<<(CORE_PIN1_BIT))
+#define CORE_PIN2_BITMASK	(1<<(CORE_PIN2_BIT))
+#define CORE_PIN3_BITMASK	(1<<(CORE_PIN3_BIT))
+#define CORE_PIN4_BITMASK	(1<<(CORE_PIN4_BIT))
+#define CORE_PIN5_BITMASK	(1<<(CORE_PIN5_BIT))
+#define CORE_PIN6_BITMASK	(1<<(CORE_PIN6_BIT))
+#define CORE_PIN7_BITMASK	(1<<(CORE_PIN7_BIT))
+#define CORE_PIN8_BITMASK	(1<<(CORE_PIN8_BIT))
+#define CORE_PIN9_BITMASK	(1<<(CORE_PIN9_BIT))
+#define CORE_PIN10_BITMASK	(1<<(CORE_PIN10_BIT))
+#define CORE_PIN11_BITMASK	(1<<(CORE_PIN11_BIT))
+#define CORE_PIN12_BITMASK	(1<<(CORE_PIN12_BIT))
+#define CORE_PIN13_BITMASK	(1<<(CORE_PIN13_BIT))
+#define CORE_PIN14_BITMASK	(1<<(CORE_PIN14_BIT))
+#define CORE_PIN15_BITMASK	(1<<(CORE_PIN15_BIT))
+#define CORE_PIN16_BITMASK	(1<<(CORE_PIN16_BIT))
+#define CORE_PIN17_BITMASK	(1<<(CORE_PIN17_BIT))
+#define CORE_PIN18_BITMASK	(1<<(CORE_PIN18_BIT))
+#define CORE_PIN19_BITMASK	(1<<(CORE_PIN19_BIT))
+#define CORE_PIN20_BITMASK	(1<<(CORE_PIN20_BIT))
+#define CORE_PIN21_BITMASK	(1<<(CORE_PIN21_BIT))
+#define CORE_PIN22_BITMASK	(1<<(CORE_PIN22_BIT))
+#define CORE_PIN23_BITMASK	(1<<(CORE_PIN23_BIT))
+#define CORE_PIN24_BITMASK	(1<<(CORE_PIN24_BIT))
+#define CORE_PIN25_BITMASK	(1<<(CORE_PIN25_BIT))
+#define CORE_PIN26_BITMASK	(1<<(CORE_PIN26_BIT))
+#define CORE_PIN27_BITMASK	(1<<(CORE_PIN27_BIT))
+#define CORE_PIN28_BITMASK	(1<<(CORE_PIN28_BIT))
+#define CORE_PIN29_BITMASK	(1<<(CORE_PIN29_BIT))
+#define CORE_PIN30_BITMASK	(1<<(CORE_PIN30_BIT))
+#define CORE_PIN31_BITMASK	(1<<(CORE_PIN31_BIT))
+#define CORE_PIN32_BITMASK	(1<<(CORE_PIN32_BIT))
+#define CORE_PIN33_BITMASK	(1<<(CORE_PIN33_BIT))
+
+#define CORE_PIN0_PORTREG	GPIO1_DR
+#define CORE_PIN1_PORTREG	GPIO1_DR
+#define CORE_PIN2_PORTREG	GPIO4_DR
+#define CORE_PIN3_PORTREG	GPIO4_DR
+#define CORE_PIN4_PORTREG	GPIO4_DR
+#define CORE_PIN5_PORTREG	GPIO4_DR
+#define CORE_PIN6_PORTREG	GPIO2_DR
+#define CORE_PIN7_PORTREG	GPIO2_DR
+#define CORE_PIN8_PORTREG	GPIO2_DR
+#define CORE_PIN9_PORTREG	GPIO2_DR
+#define CORE_PIN10_PORTREG	GPIO2_DR
+#define CORE_PIN11_PORTREG	GPIO2_DR
+#define CORE_PIN12_PORTREG	GPIO2_DR
+#define CORE_PIN13_PORTREG	GPIO2_DR
+#define CORE_PIN14_PORTREG	GPIO1_DR
+#define CORE_PIN15_PORTREG	GPIO1_DR
+#define CORE_PIN16_PORTREG	GPIO1_DR
+#define CORE_PIN17_PORTREG	GPIO1_DR
+#define CORE_PIN18_PORTREG	GPIO1_DR
+#define CORE_PIN19_PORTREG	GPIO1_DR
+#define CORE_PIN20_PORTREG	GPIO1_DR
+#define CORE_PIN21_PORTREG	GPIO1_DR
+#define CORE_PIN22_PORTREG	GPIO1_DR
+#define CORE_PIN23_PORTREG	GPIO1_DR
+#define CORE_PIN24_PORTREG	GPIO1_DR
+#define CORE_PIN25_PORTREG	GPIO1_DR
+#define CORE_PIN26_PORTREG	GPIO1_DR
+#define CORE_PIN27_PORTREG	GPIO1_DR
+#define CORE_PIN28_PORTREG	GPIO3_DR
+#define CORE_PIN29_PORTREG	GPIO4_DR
+#define CORE_PIN30_PORTREG	GPIO4_DR
+#define CORE_PIN31_PORTREG	GPIO4_DR
+#define CORE_PIN32_PORTREG	GPIO2_DR
+#define CORE_PIN33_PORTREG	GPIO4_DR
+
+#define CORE_PIN0_PORTSET	GPIO1_DR_SET
+#define CORE_PIN1_PORTSET	GPIO1_DR_SET
+#define CORE_PIN2_PORTSET	GPIO4_DR_SET
+#define CORE_PIN3_PORTSET	GPIO4_DR_SET
+#define CORE_PIN4_PORTSET	GPIO4_DR_SET
+#define CORE_PIN5_PORTSET	GPIO4_DR_SET
+#define CORE_PIN6_PORTSET	GPIO2_DR_SET
+#define CORE_PIN7_PORTSET	GPIO2_DR_SET
+#define CORE_PIN8_PORTSET	GPIO2_DR_SET
+#define CORE_PIN9_PORTSET	GPIO2_DR_SET
+#define CORE_PIN10_PORTSET	GPIO2_DR_SET
+#define CORE_PIN11_PORTSET	GPIO2_DR_SET
+#define CORE_PIN12_PORTSET	GPIO2_DR_SET
+#define CORE_PIN13_PORTSET	GPIO2_DR_SET
+#define CORE_PIN14_PORTSET	GPIO1_DR_SET
+#define CORE_PIN15_PORTSET	GPIO1_DR_SET
+#define CORE_PIN16_PORTSET	GPIO1_DR_SET
+#define CORE_PIN17_PORTSET	GPIO1_DR_SET
+#define CORE_PIN18_PORTSET	GPIO1_DR_SET
+#define CORE_PIN19_PORTSET	GPIO1_DR_SET
+#define CORE_PIN20_PORTSET	GPIO1_DR_SET
+#define CORE_PIN21_PORTSET	GPIO1_DR_SET
+#define CORE_PIN22_PORTSET	GPIO1_DR_SET
+#define CORE_PIN23_PORTSET	GPIO1_DR_SET
+#define CORE_PIN24_PORTSET	GPIO1_DR_SET
+#define CORE_PIN25_PORTSET	GPIO1_DR_SET
+#define CORE_PIN26_PORTSET	GPIO1_DR_SET
+#define CORE_PIN27_PORTSET	GPIO1_DR_SET
+#define CORE_PIN28_PORTSET	GPIO3_DR_SET
+#define CORE_PIN29_PORTSET	GPIO4_DR_SET
+#define CORE_PIN30_PORTSET	GPIO4_DR_SET
+#define CORE_PIN31_PORTSET	GPIO4_DR_SET
+#define CORE_PIN32_PORTSET	GPIO2_DR_SET
+#define CORE_PIN33_PORTSET	GPIO4_DR_SET
+
+#define CORE_PIN0_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN1_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN2_PORTCLEAR	GPIO4_DR_CLEAR
+#define CORE_PIN3_PORTCLEAR	GPIO4_DR_CLEAR
+#define CORE_PIN4_PORTCLEAR	GPIO4_DR_CLEAR
+#define CORE_PIN5_PORTCLEAR	GPIO4_DR_CLEAR
+#define CORE_PIN6_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN7_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN8_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN9_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN10_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN11_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN12_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN13_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN14_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN15_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN16_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN17_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN18_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN19_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN20_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN21_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN22_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN23_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN24_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN25_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN26_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN27_PORTCLEAR	GPIO1_DR_CLEAR
+#define CORE_PIN28_PORTCLEAR	GPIO3_DR_CLEAR
+#define CORE_PIN29_PORTCLEAR	GPIO4_DR_CLEAR
+#define CORE_PIN30_PORTCLEAR	GPIO4_DR_CLEAR
+#define CORE_PIN31_PORTCLEAR	GPIO4_DR_CLEAR
+#define CORE_PIN32_PORTCLEAR	GPIO2_DR_CLEAR
+#define CORE_PIN33_PORTCLEAR	GPIO4_DR_CLEAR
+
+#define CORE_PIN0_DDRREG	GPIO1_GDIR
+#define CORE_PIN1_DDRREG	GPIO1_GDIR
+#define CORE_PIN2_DDRREG	GPIO4_GDIR
+#define CORE_PIN3_DDRREG	GPIO4_GDIR
+#define CORE_PIN4_DDRREG	GPIO4_GDIR
+#define CORE_PIN5_DDRREG	GPIO4_GDIR
+#define CORE_PIN6_DDRREG	GPIO2_GDIR
+#define CORE_PIN7_DDRREG	GPIO2_GDIR
+#define CORE_PIN8_DDRREG	GPIO2_GDIR
+#define CORE_PIN9_DDRREG	GPIO2_GDIR
+#define CORE_PIN10_DDRREG	GPIO2_GDIR
+#define CORE_PIN11_DDRREG	GPIO2_GDIR
+#define CORE_PIN12_DDRREG	GPIO2_GDIR
+#define CORE_PIN13_DDRREG	GPIO2_GDIR
+#define CORE_PIN14_DDRREG	GPIO1_GDIR
+#define CORE_PIN15_DDRREG	GPIO1_GDIR
+#define CORE_PIN16_DDRREG	GPIO1_GDIR
+#define CORE_PIN17_DDRREG	GPIO1_GDIR
+#define CORE_PIN18_DDRREG	GPIO1_GDIR
+#define CORE_PIN19_DDRREG	GPIO1_GDIR
+#define CORE_PIN20_DDRREG	GPIO1_GDIR
+#define CORE_PIN21_DDRREG	GPIO1_GDIR
+#define CORE_PIN22_DDRREG	GPIO1_GDIR
+#define CORE_PIN23_DDRREG	GPIO1_GDIR
+#define CORE_PIN24_DDRREG	GPIO1_GDIR
+#define CORE_PIN25_DDRREG	GPIO1_GDIR
+#define CORE_PIN26_DDRREG	GPIO1_GDIR
+#define CORE_PIN27_DDRREG	GPIO1_GDIR
+#define CORE_PIN28_DDRREG	GPIO3_GDIR
+#define CORE_PIN29_DDRREG	GPIO4_GDIR
+#define CORE_PIN30_DDRREG	GPIO4_GDIR
+#define CORE_PIN31_DDRREG	GPIO4_GDIR
+#define CORE_PIN32_DDRREG	GPIO2_GDIR
+#define CORE_PIN33_DDRREG	GPIO4_GDIR
+
+#define CORE_PIN0_PINREG	GPIO1_PSR
+#define CORE_PIN1_PINREG	GPIO1_PSR
+#define CORE_PIN2_PINREG	GPIO4_PSR
+#define CORE_PIN3_PINREG	GPIO4_PSR
+#define CORE_PIN4_PINREG	GPIO4_PSR
+#define CORE_PIN5_PINREG	GPIO4_PSR
+#define CORE_PIN6_PINREG	GPIO2_PSR
+#define CORE_PIN7_PINREG	GPIO2_PSR
+#define CORE_PIN8_PINREG	GPIO2_PSR
+#define CORE_PIN9_PINREG	GPIO2_PSR
+#define CORE_PIN10_PINREG	GPIO2_PSR
+#define CORE_PIN11_PINREG	GPIO2_PSR
+#define CORE_PIN12_PINREG	GPIO2_PSR
+#define CORE_PIN13_PINREG	GPIO2_PSR
+#define CORE_PIN14_PINREG	GPIO1_PSR
+#define CORE_PIN15_PINREG	GPIO1_PSR
+#define CORE_PIN16_PINREG	GPIO1_PSR
+#define CORE_PIN17_PINREG	GPIO1_PSR
+#define CORE_PIN18_PINREG	GPIO1_PSR
+#define CORE_PIN19_PINREG	GPIO1_PSR
+#define CORE_PIN20_PINREG	GPIO1_PSR
+#define CORE_PIN21_PINREG	GPIO1_PSR
+#define CORE_PIN22_PINREG	GPIO1_PSR
+#define CORE_PIN23_PINREG	GPIO1_PSR
+#define CORE_PIN24_PINREG	GPIO1_PSR
+#define CORE_PIN25_PINREG	GPIO1_PSR
+#define CORE_PIN26_PINREG	GPIO1_PSR
+#define CORE_PIN27_PINREG	GPIO1_PSR
+#define CORE_PIN28_PINREG	GPIO3_PSR
+#define CORE_PIN29_PINREG	GPIO4_PSR
+#define CORE_PIN30_PINREG	GPIO4_PSR
+#define CORE_PIN31_PINREG	GPIO4_PSR
+#define CORE_PIN32_PINREG	GPIO2_PSR
+#define CORE_PIN33_PINREG	GPIO4_PSR
+
+// mux config registers control which peripheral uses the pin
+#define CORE_PIN0_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02
+#define CORE_PIN1_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03
+#define CORE_PIN2_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04
+#define CORE_PIN3_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05
+#define CORE_PIN4_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06
+#define CORE_PIN5_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07
+#define CORE_PIN6_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01
+#define CORE_PIN7_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00
+#define CORE_PIN8_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_10
+#define CORE_PIN9_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_11
+#define CORE_PIN10_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_00
+#define CORE_PIN11_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_02
+#define CORE_PIN12_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_01
+#define CORE_PIN13_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03
+#define CORE_PIN14_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02
+#define CORE_PIN15_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03
+#define CORE_PIN16_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07
+#define CORE_PIN17_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06
+#define CORE_PIN18_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01
+#define CORE_PIN19_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_00
+#define CORE_PIN20_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10
+#define CORE_PIN21_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11
+#define CORE_PIN22_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_08
+#define CORE_PIN23_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_09
+#define CORE_PIN24_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12
+#define CORE_PIN25_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13
+#define CORE_PIN26_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_14
+#define CORE_PIN27_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_15
+#define CORE_PIN28_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32
+#define CORE_PIN29_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31
+#define CORE_PIN30_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24
+#define CORE_PIN31_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_23
+#define CORE_PIN32_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_12
+#define CORE_PIN33_CONFIG	IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08
+
+// pad config registers control pullup/pulldown/keeper, drive strength, etc
+#define CORE_PIN0_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_02
+#define CORE_PIN1_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_03
+#define CORE_PIN2_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_04
+#define CORE_PIN3_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_05
+#define CORE_PIN4_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_06
+#define CORE_PIN5_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_07
+#define CORE_PIN6_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B1_01
+#define CORE_PIN7_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B1_00
+#define CORE_PIN8_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_10
+#define CORE_PIN9_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_11
+#define CORE_PIN10_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_00
+#define CORE_PIN11_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_02
+#define CORE_PIN12_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_01
+#define CORE_PIN13_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_03
+#define CORE_PIN14_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_02
+#define CORE_PIN15_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_03
+#define CORE_PIN16_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_07
+#define CORE_PIN17_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_06
+#define CORE_PIN18_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_01
+#define CORE_PIN19_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_00
+#define CORE_PIN20_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_10
+#define CORE_PIN21_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_11
+#define CORE_PIN22_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_08
+#define CORE_PIN23_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_09
+#define CORE_PIN24_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_12
+#define CORE_PIN25_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B0_13
+#define CORE_PIN26_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_14
+#define CORE_PIN27_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_AD_B1_15
+#define CORE_PIN28_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_32
+#define CORE_PIN29_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_31
+#define CORE_PIN30_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_24
+#define CORE_PIN31_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_23
+#define CORE_PIN32_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_12
+#define CORE_PIN33_PADCONFIG	IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_08
+
+
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+void digitalWrite(uint8_t pin, uint8_t val);
+static inline void digitalWriteFast(uint8_t pin, uint8_t val) __attribute__((always_inline, unused));
+static inline void digitalWriteFast(uint8_t pin, uint8_t val)
+{
+	if (__builtin_constant_p(pin)) {
+		if (val) {
+			if (pin == 0) {
+				CORE_PIN0_PORTSET = CORE_PIN0_BITMASK;
+			} else if (pin == 1) {
+				CORE_PIN1_PORTSET = CORE_PIN1_BITMASK;
+			} else if (pin == 2) {
+				CORE_PIN2_PORTSET = CORE_PIN2_BITMASK;
+			} else if (pin == 3) {
+				CORE_PIN3_PORTSET = CORE_PIN3_BITMASK;
+			} else if (pin == 4) {
+				CORE_PIN4_PORTSET = CORE_PIN4_BITMASK;
+			} else if (pin == 5) {
+				CORE_PIN5_PORTSET = CORE_PIN5_BITMASK;
+			} else if (pin == 6) {
+				CORE_PIN6_PORTSET = CORE_PIN6_BITMASK;
+			} else if (pin == 7) {
+				CORE_PIN7_PORTSET = CORE_PIN7_BITMASK;
+			} else if (pin == 8) {
+				CORE_PIN8_PORTSET = CORE_PIN8_BITMASK;
+			} else if (pin == 9) {
+				CORE_PIN9_PORTSET = CORE_PIN9_BITMASK;
+			} else if (pin == 10) {
+				CORE_PIN10_PORTSET = CORE_PIN10_BITMASK;
+			} else if (pin == 11) {
+				CORE_PIN11_PORTSET = CORE_PIN11_BITMASK;
+			} else if (pin == 12) {
+				CORE_PIN12_PORTSET = CORE_PIN12_BITMASK;
+			} else if (pin == 13) {
+				CORE_PIN13_PORTSET = CORE_PIN13_BITMASK;
+			} else if (pin == 14) {
+				CORE_PIN14_PORTSET = CORE_PIN14_BITMASK;
+			} else if (pin == 15) {
+				CORE_PIN15_PORTSET = CORE_PIN15_BITMASK;
+			} else if (pin == 16) {
+				CORE_PIN16_PORTSET = CORE_PIN16_BITMASK;
+			} else if (pin == 17) {
+				CORE_PIN17_PORTSET = CORE_PIN17_BITMASK;
+			} else if (pin == 18) {
+				CORE_PIN18_PORTSET = CORE_PIN18_BITMASK;
+			} else if (pin == 19) {
+				CORE_PIN19_PORTSET = CORE_PIN19_BITMASK;
+			} else if (pin == 20) {
+				CORE_PIN20_PORTSET = CORE_PIN20_BITMASK;
+			} else if (pin == 21) {
+				CORE_PIN21_PORTSET = CORE_PIN21_BITMASK;
+			} else if (pin == 22) {
+				CORE_PIN22_PORTSET = CORE_PIN22_BITMASK;
+			} else if (pin == 23) {
+				CORE_PIN23_PORTSET = CORE_PIN23_BITMASK;
+			} else if (pin == 24) {
+				CORE_PIN24_PORTSET = CORE_PIN24_BITMASK;
+			} else if (pin == 25) {
+				CORE_PIN25_PORTSET = CORE_PIN25_BITMASK;
+			} else if (pin == 26) {
+				CORE_PIN26_PORTSET = CORE_PIN26_BITMASK;
+			} else if (pin == 27) {
+				CORE_PIN27_PORTSET = CORE_PIN27_BITMASK;
+			} else if (pin == 28) {
+				CORE_PIN28_PORTSET = CORE_PIN28_BITMASK;
+			} else if (pin == 29) {
+				CORE_PIN29_PORTSET = CORE_PIN29_BITMASK;
+			} else if (pin == 30) {
+				CORE_PIN30_PORTSET = CORE_PIN30_BITMASK;
+			} else if (pin == 31) {
+				CORE_PIN31_PORTSET = CORE_PIN31_BITMASK;
+			} else if (pin == 32) {
+				CORE_PIN32_PORTSET = CORE_PIN32_BITMASK;
+			} else if (pin == 33) {
+				CORE_PIN33_PORTSET = CORE_PIN33_BITMASK;
+			}
+		} else {
+			if (pin == 0) {
+				CORE_PIN0_PORTCLEAR = CORE_PIN0_BITMASK;
+			} else if (pin == 1) {
+				CORE_PIN1_PORTCLEAR = CORE_PIN1_BITMASK;
+			} else if (pin == 2) {
+				CORE_PIN2_PORTCLEAR = CORE_PIN2_BITMASK;
+			} else if (pin == 3) {
+				CORE_PIN3_PORTCLEAR = CORE_PIN3_BITMASK;
+			} else if (pin == 4) {
+				CORE_PIN4_PORTCLEAR = CORE_PIN4_BITMASK;
+			} else if (pin == 5) {
+				CORE_PIN5_PORTCLEAR = CORE_PIN5_BITMASK;
+			} else if (pin == 6) {
+				CORE_PIN6_PORTCLEAR = CORE_PIN6_BITMASK;
+			} else if (pin == 7) {
+				CORE_PIN7_PORTCLEAR = CORE_PIN7_BITMASK;
+			} else if (pin == 8) {
+				CORE_PIN8_PORTCLEAR = CORE_PIN8_BITMASK;
+			} else if (pin == 9) {
+				CORE_PIN9_PORTCLEAR = CORE_PIN9_BITMASK;
+			} else if (pin == 10) {
+				CORE_PIN10_PORTCLEAR = CORE_PIN10_BITMASK;
+			} else if (pin == 11) {
+				CORE_PIN11_PORTCLEAR = CORE_PIN11_BITMASK;
+			} else if (pin == 12) {
+				CORE_PIN12_PORTCLEAR = CORE_PIN12_BITMASK;
+			} else if (pin == 13) {
+				CORE_PIN13_PORTCLEAR = CORE_PIN13_BITMASK;
+			} else if (pin == 14) {
+				CORE_PIN14_PORTCLEAR = CORE_PIN14_BITMASK;
+			} else if (pin == 15) {
+				CORE_PIN15_PORTCLEAR = CORE_PIN15_BITMASK;
+			} else if (pin == 16) {
+				CORE_PIN16_PORTCLEAR = CORE_PIN16_BITMASK;
+			} else if (pin == 17) {
+				CORE_PIN17_PORTCLEAR = CORE_PIN17_BITMASK;
+			} else if (pin == 18) {
+				CORE_PIN18_PORTCLEAR = CORE_PIN18_BITMASK;
+			} else if (pin == 19) {
+				CORE_PIN19_PORTCLEAR = CORE_PIN19_BITMASK;
+			} else if (pin == 20) {
+				CORE_PIN20_PORTCLEAR = CORE_PIN20_BITMASK;
+			} else if (pin == 21) {
+				CORE_PIN21_PORTCLEAR = CORE_PIN21_BITMASK;
+			} else if (pin == 22) {
+				CORE_PIN22_PORTCLEAR = CORE_PIN22_BITMASK;
+			} else if (pin == 23) {
+				CORE_PIN23_PORTCLEAR = CORE_PIN23_BITMASK;
+			} else if (pin == 24) {
+				CORE_PIN24_PORTCLEAR = CORE_PIN24_BITMASK;
+			} else if (pin == 25) {
+				CORE_PIN25_PORTCLEAR = CORE_PIN25_BITMASK;
+			} else if (pin == 26) {
+				CORE_PIN26_PORTCLEAR = CORE_PIN26_BITMASK;
+			} else if (pin == 27) {
+				CORE_PIN27_PORTCLEAR = CORE_PIN27_BITMASK;
+			} else if (pin == 28) {
+				CORE_PIN28_PORTCLEAR = CORE_PIN28_BITMASK;
+			} else if (pin == 29) {
+				CORE_PIN29_PORTCLEAR = CORE_PIN29_BITMASK;
+			} else if (pin == 30) {
+				CORE_PIN30_PORTCLEAR = CORE_PIN30_BITMASK;
+			} else if (pin == 31) {
+				CORE_PIN31_PORTCLEAR = CORE_PIN31_BITMASK;
+			} else if (pin == 32) {
+				CORE_PIN32_PORTCLEAR = CORE_PIN32_BITMASK;
+			} else if (pin == 33) {
+				CORE_PIN33_PORTCLEAR = CORE_PIN33_BITMASK;
+			}
+		}
+	} else {
+		*portClearRegister(pin) = digitalPinToBitMask(pin);
+	}
+}
+
+uint8_t digitalRead(uint8_t pin);
+static inline uint8_t digitalReadFast(uint8_t pin) __attribute__((always_inline, unused));
+static inline uint8_t digitalReadFast(uint8_t pin)
+{
+	if (__builtin_constant_p(pin)) {
+		if (pin == 0) {
+			return (CORE_PIN0_PINREG & CORE_PIN0_BITMASK) ? 1 : 0;
+		} else if (pin == 1) {
+			return (CORE_PIN1_PINREG & CORE_PIN1_BITMASK) ? 1 : 0;
+		} else if (pin == 2) {
+			return (CORE_PIN2_PINREG & CORE_PIN2_BITMASK) ? 1 : 0;
+		} else if (pin == 3) {
+			return (CORE_PIN3_PINREG & CORE_PIN3_BITMASK) ? 1 : 0;
+		} else if (pin == 4) {
+			return (CORE_PIN4_PINREG & CORE_PIN4_BITMASK) ? 1 : 0;
+		} else if (pin == 5) {
+			return (CORE_PIN5_PINREG & CORE_PIN5_BITMASK) ? 1 : 0;
+		} else if (pin == 6) {
+			return (CORE_PIN6_PINREG & CORE_PIN6_BITMASK) ? 1 : 0;
+		} else if (pin == 7) {
+			return (CORE_PIN7_PINREG & CORE_PIN7_BITMASK) ? 1 : 0;
+		} else if (pin == 8) {
+			return (CORE_PIN8_PINREG & CORE_PIN8_BITMASK) ? 1 : 0;
+		} else if (pin == 9) {
+			return (CORE_PIN9_PINREG & CORE_PIN9_BITMASK) ? 1 : 0;
+		} else if (pin == 10) {
+			return (CORE_PIN10_PINREG & CORE_PIN10_BITMASK) ? 1 : 0;
+		} else if (pin == 11) {
+			return (CORE_PIN11_PINREG & CORE_PIN11_BITMASK) ? 1 : 0;
+		} else if (pin == 12) {
+			return (CORE_PIN12_PINREG & CORE_PIN12_BITMASK) ? 1 : 0;
+		} else if (pin == 13) {
+			return (CORE_PIN13_PINREG & CORE_PIN13_BITMASK) ? 1 : 0;
+		} else if (pin == 14) {
+			return (CORE_PIN14_PINREG & CORE_PIN14_BITMASK) ? 1 : 0;
+		} else if (pin == 15) {
+			return (CORE_PIN15_PINREG & CORE_PIN15_BITMASK) ? 1 : 0;
+		} else if (pin == 16) {
+			return (CORE_PIN16_PINREG & CORE_PIN16_BITMASK) ? 1 : 0;
+		} else if (pin == 17) {
+			return (CORE_PIN17_PINREG & CORE_PIN17_BITMASK) ? 1 : 0;
+		} else if (pin == 18) {
+			return (CORE_PIN18_PINREG & CORE_PIN18_BITMASK) ? 1 : 0;
+		} else if (pin == 19) {
+			return (CORE_PIN19_PINREG & CORE_PIN19_BITMASK) ? 1 : 0;
+		} else if (pin == 20) {
+			return (CORE_PIN20_PINREG & CORE_PIN20_BITMASK) ? 1 : 0;
+		} else if (pin == 21) {
+			return (CORE_PIN21_PINREG & CORE_PIN21_BITMASK) ? 1 : 0;
+		} else if (pin == 22) {
+			return (CORE_PIN22_PINREG & CORE_PIN22_BITMASK) ? 1 : 0;
+		} else if (pin == 23) {
+			return (CORE_PIN23_PINREG & CORE_PIN23_BITMASK) ? 1 : 0;
+		} else if (pin == 24) {
+			return (CORE_PIN24_PINREG & CORE_PIN24_BITMASK) ? 1 : 0;
+		} else if (pin == 25) {
+			return (CORE_PIN25_PINREG & CORE_PIN25_BITMASK) ? 1 : 0;
+		} else if (pin == 26) {
+			return (CORE_PIN26_PINREG & CORE_PIN26_BITMASK) ? 1 : 0;
+		} else if (pin == 27) {
+			return (CORE_PIN27_PINREG & CORE_PIN27_BITMASK) ? 1 : 0;
+		} else if (pin == 28) {
+			return (CORE_PIN28_PINREG & CORE_PIN28_BITMASK) ? 1 : 0;
+		} else if (pin == 29) {
+			return (CORE_PIN29_PINREG & CORE_PIN29_BITMASK) ? 1 : 0;
+		} else if (pin == 30) {
+			return (CORE_PIN30_PINREG & CORE_PIN30_BITMASK) ? 1 : 0;
+		} else if (pin == 31) {
+			return (CORE_PIN31_PINREG & CORE_PIN31_BITMASK) ? 1 : 0;
+		} else if (pin == 32) {
+			return (CORE_PIN32_PINREG & CORE_PIN32_BITMASK) ? 1 : 0;
+		} else if (pin == 33) {
+			return (CORE_PIN33_PINREG & CORE_PIN33_BITMASK) ? 1 : 0;
+		} else {
+			return 0;
+		}
+	} else {
+		return (*portInputRegister(pin) & digitalPinToBitMask(pin)) ? 1 : 0;
+	}
+}
+
+
+void pinMode(uint8_t pin, uint8_t mode);
+void init_pins(void);
+void analogWrite(uint8_t pin, int val);
+uint32_t analogWriteRes(uint32_t bits);
+static inline uint32_t analogWriteResolution(uint32_t bits) { return analogWriteRes(bits); }
+void analogWriteFrequency(uint8_t pin, float frequency);
+#ifdef __cplusplus
+void attachInterruptVector(IRQ_NUMBER_t irq, void (*function)(void));
+#else
+void attachInterruptVector(enum IRQ_NUMBER_t irq, void (*function)(void));
+#endif
+void attachInterrupt(uint8_t pin, void (*function)(void), int mode);
+void detachInterrupt(uint8_t pin);
+void _init_Teensyduino_internal_(void);
+int analogRead(uint8_t pin);
+void analogReference(uint8_t type);
+void analogReadRes(unsigned int bits);
+static inline void analogReadResolution(unsigned int bits) { analogReadRes(bits); }
+void analogReadAveraging(unsigned int num);
+void analog_init(void);
+int touchRead(uint8_t pin);
+
+static inline void shiftOut(uint8_t, uint8_t, uint8_t, uint8_t) __attribute__((always_inline, unused));
+extern void _shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t value) __attribute__((noinline));
+extern void shiftOut_lsbFirst(uint8_t dataPin, uint8_t clockPin, uint8_t value) __attribute__((noinline));
+extern void shiftOut_msbFirst(uint8_t dataPin, uint8_t clockPin, uint8_t value) __attribute__((noinline));
+
+static inline void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t value)
+{
+        if (__builtin_constant_p(bitOrder)) {
+                if (bitOrder == LSBFIRST) {
+                        shiftOut_lsbFirst(dataPin, clockPin, value);
+                } else {
+                        shiftOut_msbFirst(dataPin, clockPin, value);
+                }
+        } else {
+                _shiftOut(dataPin, clockPin, bitOrder, value);
+        }
+}
+
+static inline uint8_t shiftIn(uint8_t, uint8_t, uint8_t) __attribute__((always_inline, unused));
+extern uint8_t _shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) __attribute__((noinline));
+extern uint8_t shiftIn_lsbFirst(uint8_t dataPin, uint8_t clockPin) __attribute__((noinline));
+extern uint8_t shiftIn_msbFirst(uint8_t dataPin, uint8_t clockPin) __attribute__((noinline));
+
+static inline uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder)
+{
+        if (__builtin_constant_p(bitOrder)) {
+                if (bitOrder == LSBFIRST) {
+                        return shiftIn_lsbFirst(dataPin, clockPin);
+                } else {
+                        return shiftIn_msbFirst(dataPin, clockPin);
+                }
+        } else {
+                return _shiftIn(dataPin, clockPin, bitOrder);
+        }
+}
+
+void _reboot_Teensyduino_(void) __attribute__((noreturn));
+void _restart_Teensyduino_(void) __attribute__((noreturn));
+
+void yield(void);
+
+void delay(uint32_t msec);
+
+extern volatile uint32_t F_CPU_ACTUAL;
+extern volatile uint32_t F_BUS_ACTUAL;
+extern volatile uint32_t systick_millis_count;
+
+static inline uint32_t millis(void) __attribute__((always_inline, unused));
+static inline uint32_t millis(void)
+{
+	return systick_millis_count;
+}
+
+uint32_t micros(void);
+
+static inline void delayMicroseconds(uint32_t) __attribute__((always_inline, unused));
+static inline void delayMicroseconds(uint32_t usec)
+{
+	uint32_t begin = ARM_DWT_CYCCNT;
+	uint32_t cycles = F_CPU_ACTUAL / 1000000 * usec;
+	// TODO: check if cycles is large, do a wait with yield calls until it's smaller
+	while (ARM_DWT_CYCCNT - begin < cycles) ; // wait
+}
+
+
+
+unsigned long rtc_get(void);
+void rtc_set(unsigned long t);
+void rtc_compensate(int adjust);
+
+#ifdef __cplusplus
+}
+
+class teensy3_clock_class
+{
+public:
+        static unsigned long get(void) __attribute__((always_inline)) { return rtc_get(); }
+        static void set(unsigned long t) __attribute__((always_inline)) { rtc_set(t); }
+        static void compensate(int adj) __attribute__((always_inline)) { rtc_compensate(adj); }
+};
+extern teensy3_clock_class Teensy3Clock;
+
+#endif // __cplusplus
+
+
+
+

teensy4/debug/printf.h

@@ -0,0 +1,13 @@
+#define PRINT_DEBUG_STUFF
+
+#ifdef PRINT_DEBUG_STUFF
+#define printf_init() printf_debug_init()
+#define printf(...) printf_debug(__VA_ARGS__)
+void print_debug_init(void);
+void printf_debug(const char *format, ...);
+
+#else
+#define printf_init()
+#define printf(...)
+
+#endif

teensy4/debugprintf.c

@@ -0,0 +1,95 @@
+#include "debug/printf.h"
+
+#ifdef PRINT_DEBUG_STUFF
+
+#include <stdarg.h>
+#include "imxrt.h"
+
+static void puint_debug(unsigned int num);
+
+
+__attribute__((section(".progmem")))
+void printf_debug(const char *format, ...)
+{
+	va_list args;
+	unsigned int val;
+	int n;
+
+	va_start(args, format);
+	for (; *format != 0; format++) { // no-frills stand-alone printf
+		if (*format == '%') {
+			++format;
+			if (*format == '%') goto out;
+			if (*format == '-') format++; // ignore size
+			while (*format >= '0' && *format <= '9') format++; // ignore size
+			if (*format == 'l') format++; // ignore long
+			if (*format == '\0') break;
+			if (*format == 's') {
+				printf_debug((char *)va_arg(args, int));
+			} else if (*format == 'd') {
+				n = va_arg(args, int);
+				if (n < 0) {
+					n = -n;
+					putchar_debug('-');
+				}
+				val = n;
+				puint_debug(n);
+			} else if (*format == 'u') {
+				puint_debug(va_arg(args, unsigned int));
+			} else if (*format == 'x' || *format == 'X') {
+				val = va_arg(args, unsigned int);
+				for (n=0; n < 8; n++) {
+					unsigned int d = (val >> 28) & 15;
+					putchar_debug((d < 10) ? d + '0' : d - 10 + 'A');
+					val <<= 4;
+				}
+			} else if (*format == 'c' ) {
+				putchar_debug((char)va_arg(args, int));
+			}
+		} else {
+			out:
+			if (*format == '\n') putchar_debug('\r');
+			putchar_debug(*format);
+		}
+	}
+	va_end(args);
+}
+
+static void puint_debug(unsigned int num)
+{
+	char buf[12];
+	unsigned int i = sizeof(buf)-2;
+
+	buf[sizeof(buf)-1] = 0;
+	while (1) {
+		buf[i] = (num % 10) + '0';
+		num /= 10;
+		if (num == 0) break;
+		i--;
+	}
+	printf_debug(buf + i);
+}
+
+__attribute__((section(".progmem")))
+void putchar_debug(char c)
+{
+	while (!(LPUART3_STAT & LPUART_STAT_TDRE)) ; // wait
+	LPUART3_DATA = c;
+}
+
+__attribute__((section(".progmem")))
+void printf_debug_init(void)
+{
+        // turn on Serial4, run at 115200 baud using 24 MHz clock (works if PLL3 off)
+        CCM_CCGR0 |= CCM_CCGR0_LPUART3(CCM_CCGR_ON);
+        IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06 = 2; // Arduino pin 17
+        CCM_CSCDR1 = (CCM_CSCDR1 & ~CCM_CSCDR1_UART_CLK_PODF(0x3F)) | CCM_CSCDR1_UART_CLK_SEL;
+        LPUART3_BAUD = LPUART_BAUD_OSR(25) | LPUART_BAUD_SBR(8);
+        LPUART3_CTRL = LPUART_CTRL_TE;
+}
+
+
+
+
+
+#endif // PRINT_DEBUG_STUFF

teensy4/delay.c

@@ -0,0 +1,118 @@
+#include "core_pins.h"
+
+//volatile uint32_t F_CPU = 396000000;
+//volatile uint32_t F_BUS = 132000000;
+volatile uint32_t systick_millis_count = 0;
+
+// page 411 says "24 MHz XTALOSC can be the external clock source of SYSTICK"
+// Testing shows the frequency is actually 100 kHz - but how?  Did NXP really
+// hide an undocumented divide-by-240 circuit in the hardware?
+#define SYSTICK_EXT_FREQ 100000
+
+void systick_isr(void)
+{
+	systick_millis_count++;
+	// MillisTimer::runFromTimer();
+	//digitalWriteFast(12, HIGH);
+	//delayMicroseconds(1);
+	//digitalWriteFast(12, LOW);
+}
+
+#if 0
+void millis_init(void)
+{
+	//printf("millis_init %08lX\n", SYST_CALIB);
+	_VectorsRam[15] = systick_isr;
+#ifdef SYSTICK_EXT_FREQ
+	SYST_RVR = (SYSTICK_EXT_FREQ / 1000) - 1;
+	SYST_CVR = 0;
+	SYST_CSR = SYST_CSR_TICKINT | SYST_CSR_ENABLE;
+#else
+	SYST_RVR = (F_CPU / 1000) - 1;
+	SYST_CVR = 0;
+	SYST_CSR = SYST_CSR_CLKSOURCE | SYST_CSR_TICKINT | SYST_CSR_ENABLE;
+#endif
+	//SCB_SHPR3 = 0x20200000;  // Systick = priority 32
+	//printf("RVR=%lu\r\n", SYST_RVR);
+}
+#endif
+
+void yield(void)
+{
+
+}
+
+void delay(uint32_t msec)
+{
+	uint32_t start;
+
+	if (msec == 0) return;
+	start = micros();
+	while (1) {
+		while ((micros() - start) >= 1000) {
+			if (--msec == 0) return;
+			start += 1000;
+		}
+		yield();
+	}
+	// TODO...
+}
+
+uint32_t micros(void)
+{
+	uint32_t msec, tick, elapsed, istatus, usec;
+	//static uint32_t prev_msec=0;
+	//static uint32_t prev_istatus=0;
+	//static uint32_t prev_tick=0;
+	//static uint32_t prev_elapsed=0;
+	static uint32_t prev_usec=0;
+	static int doprint=180;
+
+	__disable_irq();
+	tick = SYST_CVR;
+	msec = systick_millis_count;
+	istatus = SCB_ICSR;     // bit 26 indicates if systick exception pending
+#ifndef SYSTICK_EXT_FREQ
+	const uint32_t fcpu = F_CPU;
+#endif
+	__enable_irq();
+	istatus &= SCB_ICSR_PENDSTSET;
+#ifdef SYSTICK_EXT_FREQ
+	if ((istatus & SCB_ICSR_PENDSTSET) && (tick == 0 || tick > (SYSTICK_EXT_FREQ / 2000))) {
+#else
+	if ((istatus & SCB_ICSR_PENDSTSET) && (tick == 0 || tick > (fcpu / 2000))) {
+#endif
+		// systick generated an interrupt at the 1 -> 0 transition, and
+		// we read it before an ISR could increment systick_millis_count
+		msec++;
+	}
+#if defined(SYSTICK_EXT_FREQ) && SYSTICK_EXT_FREQ <= 1000000
+	elapsed = (SYSTICK_EXT_FREQ / 1000) - tick;
+	if (tick == 0) elapsed = 0;
+	usec = msec * 1000 + elapsed * (1000000 / SYSTICK_EXT_FREQ);
+#elif defined(SYSTICK_EXT_FREQ) && SYSTICK_EXT_FREQ > 1000000
+	elapsed = (SYSTICK_EXT_FREQ / 1000) - tick;
+	if (tick == 0) elapsed = 0;
+	usec = msec * 1000 + elapsed / (SYSTICK_EXT_FREQ / 1000000);
+#else
+	elapsed = (fcpu / 1000) - tick;
+	if (tick == 0) elapsed = 0;
+	usec = msec * 1000 + elapsed / (fcpu / 1000000);
+#endif
+	//if (doprint) printf("%lu  %lu\r\n", msec, systick);
+	if (usec < prev_usec && doprint) {
+		//print("opps\r\n");
+		//printf("opps then: msec=%lu, systick=%lu, elapsed=%lu, usec=%lu, i=%lx\n",
+			//prev_msec, prev_tick, prev_elapsed, prev_usec, prev_istatus);
+		//printf("      now: msec=%lu, systick=%lu, elapsed=%lu, usec=%lu, i=%lx\n",
+			//msec, tick, elapsed, usec, istatus);
+		if (doprint > 0) doprint--;
+	}
+	//prev_msec = msec;
+	//prev_elapsed = elapsed;
+	//prev_tick = tick;
+	//prev_istatus = istatus;
+	prev_usec = usec;
+	return usec;
+}
+

teensy4/digital.c

@@ -0,0 +1,121 @@
+
+#include "core_pins.h"
+
+/*
+struct digital_pin_bitband_and_config_table_struct {
+        volatile uint32_t *reg;
+        volatile uint32_t *mux;
+        volatile uint32_t *pad;
+        uint32_t mask;
+};
+extern const struct digital_pin_bitband_and_config_table_struct digital_pin_to_info_PGM[];
+#define digitalPinToPort(pin)    (pin)
+#define digitalPinToBitMask(pin) (digital_pin_to_info_PGM[(pin)].mask)
+#define portOutputRegister(pin)  ((digital_pin_to_info_PGM[(pin)].reg))
+#define portSetRegister(pin)     ((digital_pin_to_info_PGM[(pin)].reg + 0x21))
+#define portClearRegister(pin)   ((digital_pin_to_info_PGM[(pin)].reg + 0x22))
+#define portToggleRegister(pin)  ((digital_pin_to_info_PGM[(pin)].reg + 0x23))
+#define portInputRegister(pin)   ((digital_pin_to_info_PGM[(pin)].reg + 2))
+#define portModeRegister(pin)    ((digital_pin_to_info_PGM[(pin)].reg + 1))
+#define portConfigRegister(pin)  ((digital_pin_to_info_PGM[(pin)].max))
+#define digitalPinToPortReg(pin) (portOutputRegister(pin))
+*/
+
+const struct digital_pin_bitband_and_config_table_struct digital_pin_to_info_PGM[] = {
+	{&CORE_PIN0_PORTREG, &CORE_PIN0_CONFIG, &CORE_PIN0_PADCONFIG, CORE_PIN0_BITMASK},
+	{&CORE_PIN1_PORTREG, &CORE_PIN1_CONFIG, &CORE_PIN1_PADCONFIG, CORE_PIN1_BITMASK},
+	{&CORE_PIN2_PORTREG, &CORE_PIN2_CONFIG, &CORE_PIN2_PADCONFIG, CORE_PIN2_BITMASK},
+	{&CORE_PIN3_PORTREG, &CORE_PIN3_CONFIG, &CORE_PIN3_PADCONFIG, CORE_PIN3_BITMASK},
+	{&CORE_PIN4_PORTREG, &CORE_PIN4_CONFIG, &CORE_PIN4_PADCONFIG, CORE_PIN4_BITMASK},
+	{&CORE_PIN5_PORTREG, &CORE_PIN5_CONFIG, &CORE_PIN5_PADCONFIG, CORE_PIN5_BITMASK},
+	{&CORE_PIN6_PORTREG, &CORE_PIN6_CONFIG, &CORE_PIN6_PADCONFIG, CORE_PIN6_BITMASK},
+	{&CORE_PIN7_PORTREG, &CORE_PIN7_CONFIG, &CORE_PIN7_PADCONFIG, CORE_PIN7_BITMASK},
+	{&CORE_PIN8_PORTREG, &CORE_PIN8_CONFIG, &CORE_PIN8_PADCONFIG, CORE_PIN8_BITMASK},
+	{&CORE_PIN9_PORTREG, &CORE_PIN9_CONFIG, &CORE_PIN9_PADCONFIG, CORE_PIN9_BITMASK},
+	{&CORE_PIN10_PORTREG, &CORE_PIN10_CONFIG, &CORE_PIN10_PADCONFIG, CORE_PIN10_BITMASK},
+	{&CORE_PIN11_PORTREG, &CORE_PIN11_CONFIG, &CORE_PIN11_PADCONFIG, CORE_PIN11_BITMASK},
+	{&CORE_PIN12_PORTREG, &CORE_PIN12_CONFIG, &CORE_PIN12_PADCONFIG, CORE_PIN12_BITMASK},
+	{&CORE_PIN13_PORTREG, &CORE_PIN13_CONFIG, &CORE_PIN13_PADCONFIG, CORE_PIN13_BITMASK},
+	{&CORE_PIN14_PORTREG, &CORE_PIN14_CONFIG, &CORE_PIN14_PADCONFIG, CORE_PIN14_BITMASK},
+	{&CORE_PIN15_PORTREG, &CORE_PIN15_CONFIG, &CORE_PIN15_PADCONFIG, CORE_PIN15_BITMASK},
+	{&CORE_PIN16_PORTREG, &CORE_PIN16_CONFIG, &CORE_PIN16_PADCONFIG, CORE_PIN16_BITMASK},
+	{&CORE_PIN17_PORTREG, &CORE_PIN17_CONFIG, &CORE_PIN17_PADCONFIG, CORE_PIN17_BITMASK},
+	{&CORE_PIN18_PORTREG, &CORE_PIN18_CONFIG, &CORE_PIN18_PADCONFIG, CORE_PIN18_BITMASK},
+	{&CORE_PIN19_PORTREG, &CORE_PIN19_CONFIG, &CORE_PIN19_PADCONFIG, CORE_PIN19_BITMASK},
+	{&CORE_PIN20_PORTREG, &CORE_PIN20_CONFIG, &CORE_PIN20_PADCONFIG, CORE_PIN20_BITMASK},
+	{&CORE_PIN21_PORTREG, &CORE_PIN21_CONFIG, &CORE_PIN21_PADCONFIG, CORE_PIN21_BITMASK},
+	{&CORE_PIN22_PORTREG, &CORE_PIN22_CONFIG, &CORE_PIN22_PADCONFIG, CORE_PIN22_BITMASK},
+	{&CORE_PIN23_PORTREG, &CORE_PIN23_CONFIG, &CORE_PIN23_PADCONFIG, CORE_PIN23_BITMASK},
+	{&CORE_PIN24_PORTREG, &CORE_PIN24_CONFIG, &CORE_PIN24_PADCONFIG, CORE_PIN24_BITMASK},
+	{&CORE_PIN25_PORTREG, &CORE_PIN25_CONFIG, &CORE_PIN25_PADCONFIG, CORE_PIN25_BITMASK},
+	{&CORE_PIN26_PORTREG, &CORE_PIN26_CONFIG, &CORE_PIN26_PADCONFIG, CORE_PIN26_BITMASK},
+	{&CORE_PIN27_PORTREG, &CORE_PIN27_CONFIG, &CORE_PIN27_PADCONFIG, CORE_PIN27_BITMASK},
+	{&CORE_PIN28_PORTREG, &CORE_PIN28_CONFIG, &CORE_PIN28_PADCONFIG, CORE_PIN28_BITMASK},
+	{&CORE_PIN29_PORTREG, &CORE_PIN29_CONFIG, &CORE_PIN29_PADCONFIG, CORE_PIN29_BITMASK},
+	{&CORE_PIN30_PORTREG, &CORE_PIN30_CONFIG, &CORE_PIN30_PADCONFIG, CORE_PIN30_BITMASK},
+	{&CORE_PIN31_PORTREG, &CORE_PIN31_CONFIG, &CORE_PIN31_PADCONFIG, CORE_PIN31_BITMASK},
+	{&CORE_PIN32_PORTREG, &CORE_PIN32_CONFIG, &CORE_PIN32_PADCONFIG, CORE_PIN32_BITMASK},
+	{&CORE_PIN33_PORTREG, &CORE_PIN33_CONFIG, &CORE_PIN33_PADCONFIG, CORE_PIN33_BITMASK},
+};
+
+void digitalWrite(uint8_t pin, uint8_t val)
+{
+	const struct digital_pin_bitband_and_config_table_struct *p;
+	uint32_t pinmode, mask;
+
+	if (pin >= CORE_NUM_DIGITAL) return;
+	p = digital_pin_to_info_PGM + pin;
+	pinmode = *(p->reg + 1);
+	mask = p->mask;
+	if (pinmode & mask) {
+		// pin is configured for output mode
+		if (val) {
+			*(p->reg + 0x21) = mask; // set register
+		} else {
+			*(p->reg + 0x22) = mask; // clear register
+		}
+	} else {
+		// pin is configured for input mode
+		// writing controls pullup resistor
+
+		// TODO....
+	}
+}
+
+uint8_t digitalRead(uint8_t pin)
+{
+	const struct digital_pin_bitband_and_config_table_struct *p;
+
+	if (pin >= CORE_NUM_DIGITAL) return 0;
+	p = digital_pin_to_info_PGM + pin;
+	return (*(p->reg + 2) & p->mask) ? 1 : 0;
+}
+
+void pinMode(uint8_t pin, uint8_t mode)
+{
+	const struct digital_pin_bitband_and_config_table_struct *p;
+
+	if (pin >= CORE_NUM_DIGITAL) return;
+	p = digital_pin_to_info_PGM + pin;
+	if (mode == OUTPUT || mode == OUTPUT_OPENDRAIN) {
+		*(p->reg + 1) |= p->mask; // TODO: atomic
+		if (mode == OUTPUT) {
+			*(p->pad) = IOMUXC_PAD_DSE(7);
+		} else { // OUTPUT_OPENDRAIN
+			*(p->pad) = IOMUXC_PAD_DSE(7) | IOMUXC_PAD_ODE;
+		}
+	} else {
+		*(p->reg + 1) &= ~(p->mask); // TODO: atomic
+		if (mode == INPUT) {
+			*(p->pad) = 0;
+		} else if (mode == INPUT_PULLUP) {
+			*(p->pad) = IOMUXC_PAD_PKE | IOMUXC_PAD_PUE | IOMUXC_PAD_PUS(3) | IOMUXC_PAD_HYS;
+		} else if (mode == INPUT_PULLDOWN) {
+			*(p->pad) = IOMUXC_PAD_PKE | IOMUXC_PAD_PUE | IOMUXC_PAD_PUS(0) | IOMUXC_PAD_HYS;
+		} else { // INPUT_DISABLE
+			*(p->pad) = IOMUXC_PAD_HYS;
+		}
+	}
+	*(p->mux) = 5;
+}
+

teensy4/elapsedMillis.h

@@ -0,0 +1,81 @@
+/* Elapsed time types - for easy-to-use measurements of elapsed time
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef elapsedMillis_h
+#define elapsedMillis_h
+#ifdef __cplusplus
+
+#if ARDUINO >= 100
+#include "Arduino.h"
+#else
+#include "WProgram.h"
+#endif
+
+class elapsedMillis
+{
+private:
+	unsigned long ms;
+public:
+	elapsedMillis(void) { ms = millis(); }
+	elapsedMillis(unsigned long val) { ms = millis() - val; }
+	elapsedMillis(const elapsedMillis &orig) { ms = orig.ms; }
+	operator unsigned long () const { return millis() - ms; }
+	elapsedMillis & operator = (const elapsedMillis &rhs) { ms = rhs.ms; return *this; }
+	elapsedMillis & operator = (unsigned long val) { ms = millis() - val; return *this; }
+	elapsedMillis & operator -= (unsigned long val)      { ms += val ; return *this; }
+	elapsedMillis & operator += (unsigned long val)      { ms -= val ; return *this; }
+	elapsedMillis operator - (int val) const           { elapsedMillis r(*this); r.ms += val; return r; }
+	elapsedMillis operator - (unsigned int val) const  { elapsedMillis r(*this); r.ms += val; return r; }
+	elapsedMillis operator - (long val) const          { elapsedMillis r(*this); r.ms += val; return r; }
+	elapsedMillis operator - (unsigned long val) const { elapsedMillis r(*this); r.ms += val; return r; }
+	elapsedMillis operator + (int val) const           { elapsedMillis r(*this); r.ms -= val; return r; }
+	elapsedMillis operator + (unsigned int val) const  { elapsedMillis r(*this); r.ms -= val; return r; }
+	elapsedMillis operator + (long val) const          { elapsedMillis r(*this); r.ms -= val; return r; }
+	elapsedMillis operator + (unsigned long val) const { elapsedMillis r(*this); r.ms -= val; return r; }
+};
+
+class elapsedMicros
+{
+private:
+	unsigned long us;
+public:
+	elapsedMicros(void) { us = micros(); }
+	elapsedMicros(unsigned long val) { us = micros() - val; }
+	elapsedMicros(const elapsedMicros &orig) { us = orig.us; }
+	operator unsigned long () const { return micros() - us; }
+	elapsedMicros & operator = (const elapsedMicros &rhs) { us = rhs.us; return *this; }
+	elapsedMicros & operator = (unsigned long val) { us = micros() - val; return *this; }
+	elapsedMicros & operator -= (unsigned long val)      { us += val ; return *this; }
+	elapsedMicros & operator += (unsigned long val)      { us -= val ; return *this; }
+	elapsedMicros operator - (int val) const           { elapsedMicros r(*this); r.us += val; return r; }
+	elapsedMicros operator - (unsigned int val) const  { elapsedMicros r(*this); r.us += val; return r; }
+	elapsedMicros operator - (long val) const          { elapsedMicros r(*this); r.us += val; return r; }
+	elapsedMicros operator - (unsigned long val) const { elapsedMicros r(*this); r.us += val; return r; }
+	elapsedMicros operator + (int val) const           { elapsedMicros r(*this); r.us -= val; return r; }
+	elapsedMicros operator + (unsigned int val) const  { elapsedMicros r(*this); r.us -= val; return r; }
+	elapsedMicros operator + (long val) const          { elapsedMicros r(*this); r.us -= val; return r; }
+	elapsedMicros operator + (unsigned long val) const { elapsedMicros r(*this); r.us -= val; return r; }
+};
+
+#endif // __cplusplus
+#endif // elapsedMillis_h

teensy4/imxrt.h

@@ -5,7 +5,6 @@
 //   i.MX RT1050 Reference Manual, Rev. 1, 03/2018
 //   ARM v7-M Architecture Reference Manual (DDI 0403E.b)
 
-#if !defined(KINETISL) && !defined(KINETISK)
 enum IRQ_NUMBER_t {
         IRQ_DMA_CH0 =           0,
         IRQ_DMA_CH1 =           1,
@@ -168,7 +167,156 @@ enum IRQ_NUMBER_t {
         IRQ_SJC_DEBUG =         158,
         IRQ_NMI_WAKEUP =        159
 };
-#endif
+#define NVIC_NUM_INTERRUPTS     160
+#define DMA_NUM_CHANNELS        32
+
+#define DMAMUX_SOURCE_FLEXIO1_REQUEST0		0
+#define DMAMUX_SOURCE_FLEXIO1_REQUEST1		0
+#define DMAMUX_SOURCE_FLEXIO2_REQUEST0		1
+#define DMAMUX_SOURCE_FLEXIO2_REQUEST1		1
+#define DMAMUX_SOURCE_LPUART1_RX		2
+#define DMAMUX_SOURCE_LPUART1_TX		3
+#define DMAMUX_SOURCE_LPUART3_RX		4
+#define DMAMUX_SOURCE_LPUART3_TX		5
+#define DMAMUX_SOURCE_LPUART5_RX		6
+#define DMAMUX_SOURCE_LPUART5_TX		7
+#define DMAMUX_SOURCE_LPUART7_RX		8
+#define DMAMUX_SOURCE_LPUART7_TX		9
+#define DMAMUX_SOURCE_FLEXCAN3			11
+#define DMAMUX_SOURCE_CSI			12
+#define DMAMUX_SOURCE_LPSPI1_RX			13
+#define DMAMUX_SOURCE_LPSPI1_TX			14
+#define DMAMUX_SOURCE_LPSPI3_RX			15
+#define DMAMUX_SOURCE_LPSPI3_TX			16
+#define DMAMUX_SOURCE_LPI2C1			17
+#define DMAMUX_SOURCE_LPI2C3			18
+#define DMAMUX_SOURCE_SAI1_RX			19
+#define DMAMUX_SOURCE_SAI1_TX			20
+#define DMAMUX_SOURCE_SAI2_RX			21
+#define DMAMUX_SOURCE_SAI2_TX			22
+#define DMAMUX_SOURCE_ADC_ETC			23
+#define DMAMUX_SOURCE_ADC1			24
+#define DMAMUX_SOURCE_ACMP1			25
+#define DMAMUX_SOURCE_ACMP3			26
+#define DMAMUX_SOURCE_FLEXSPI_RX		28
+#define DMAMUX_SOURCE_FLEXSPI_TX		29
+#define DMAMUX_SOURCE_XBAR1_0			30
+#define DMAMUX_SOURCE_XBAR1_1			31
+#define DMAMUX_SOURCE_FLEXPWM1_READ0		32
+#define DMAMUX_SOURCE_FLEXPWM1_READ1		33
+#define DMAMUX_SOURCE_FLEXPWM1_READ2		34
+#define DMAMUX_SOURCE_FLEXPWM1_READ3		35
+#define DMAMUX_SOURCE_FLEXPWM1_WRITE0		36
+#define DMAMUX_SOURCE_FLEXPWM1_WRITE1		37
+#define DMAMUX_SOURCE_FLEXPWM1_WRITE2		38
+#define DMAMUX_SOURCE_FLEXPWM1_WRITE3		39
+#define DMAMUX_SOURCE_FLEXPWM3_READ0		40
+#define DMAMUX_SOURCE_FLEXPWM3_READ1		41
+#define DMAMUX_SOURCE_FLEXPWM3_READ2		42
+#define DMAMUX_SOURCE_FLEXPWM3_READ3		43
+#define DMAMUX_SOURCE_FLEXPWM3_WRITE0		44
+#define DMAMUX_SOURCE_FLEXPWM3_WRITE1		45
+#define DMAMUX_SOURCE_FLEXPWM3_WRITE2		46
+#define DMAMUX_SOURCE_FLEXPWM3_WRITE3		47
+#define DMAMUX_SOURCE_QTIMER1_READ0		48
+#define DMAMUX_SOURCE_QTIMER1_READ1		49
+#define DMAMUX_SOURCE_QTIMER1_READ2		50
+#define DMAMUX_SOURCE_QTIMER1_READ3		51
+#define DMAMUX_SOURCE_QTIMER1_WRITE0_CMPLD1	52
+#define DMAMUX_SOURCE_QTIMER1_WRITE1_CMPLD1	53
+#define DMAMUX_SOURCE_QTIMER1_WRITE2_CMPLD1	54
+#define DMAMUX_SOURCE_QTIMER1_WRITE3_CMPLD1	55
+#define DMAMUX_SOURCE_QTIMER1_WRITE1_CMPLD2	52
+#define DMAMUX_SOURCE_QTIMER1_WRITE0_CMPLD2	53
+#define DMAMUX_SOURCE_QTIMER1_WRITE3_CMPLD2	54
+#define DMAMUX_SOURCE_QTIMER1_WRITE2_CMPLD2	55
+#define DMAMUX_SOURCE_QTIMER3_READ0		56
+#define DMAMUX_SOURCE_QTIMER3_READ1		57
+#define DMAMUX_SOURCE_QTIMER3_READ2		58
+#define DMAMUX_SOURCE_QTIMER3_READ3		59
+#define DMAMUX_SOURCE_QTIMER3_WRITE0_CMPLD1	56
+#define DMAMUX_SOURCE_QTIMER3_WRITE1_CMPLD1	57
+#define DMAMUX_SOURCE_QTIMER3_WRITE2_CMPLD1	58
+#define DMAMUX_SOURCE_QTIMER3_WRITE3_CMPLD1	59
+#define DMAMUX_SOURCE_QTIMER3_WRITE1_CMPLD2	56
+#define DMAMUX_SOURCE_QTIMER3_WRITE0_CMPLD2	57
+#define DMAMUX_SOURCE_QTIMER3_WRITE3_CMPLD2	58
+#define DMAMUX_SOURCE_QTIMER3_WRITE2_CMPLD2	59
+#define DMAMUX_SOURCE_FLEXSPI2_RX		60
+#define DMAMUX_SOURCE_FLEXSPI2_TX		61
+#define DMAMUX_SOURCE_FLEXIO1_REQUEST2		64
+#define DMAMUX_SOURCE_FLEXIO1_REQUEST3		64
+#define DMAMUX_SOURCE_FLEXIO2_REQUEST2		65
+#define DMAMUX_SOURCE_FLEXIO2_REQUEST3		65
+#define DMAMUX_SOURCE_LPUART2_RX		66
+#define DMAMUX_SOURCE_LPUART2_TX		67
+#define DMAMUX_SOURCE_LPUART4_RX		68
+#define DMAMUX_SOURCE_LPUART4_TX		69
+#define DMAMUX_SOURCE_LPUART6_RX		70
+#define DMAMUX_SOURCE_LPUART6_TX		71
+#define DMAMUX_SOURCE_LPUART8_RX		72
+#define DMAMUX_SOURCE_LPUART8_TX		73
+#define DMAMUX_SOURCE_PXP			75
+#define DMAMUX_SOURCE_LCDIF			76
+#define DMAMUX_SOURCE_LPSPI2_RX			77
+#define DMAMUX_SOURCE_LPSPI2_TX			78
+#define DMAMUX_SOURCE_LPSPI4_RX			79
+#define DMAMUX_SOURCE_LPSPI4_TX			80
+#define DMAMUX_SOURCE_LPI2C2			81
+#define DMAMUX_SOURCE_LPI2C4			82
+#define DMAMUX_SOURCE_SAI3_RX			83
+#define DMAMUX_SOURCE_SAI3_TX			84
+#define DMAMUX_SOURCE_SPDIF_RX			85
+#define DMAMUX_SOURCE_SPDIF_TX			86
+#define DMAMUX_SOURCE_ADC2			88
+#define DMAMUX_SOURCE_ACMP2			89
+#define DMAMUX_SOURCE_ACMP4			90
+#define DMAMUX_SOURCE_ENET1_TIMER0		92
+#define DMAMUX_SOURCE_ENET1_TIMER1		93
+#define DMAMUX_SOURCE_XBAR1_2			94
+#define DMAMUX_SOURCE_XBAR1_3			95
+#define DMAMUX_SOURCE_FLEXPWM2_READ0		96
+#define DMAMUX_SOURCE_FLEXPWM2_READ1		97
+#define DMAMUX_SOURCE_FLEXPWM2_READ2		98
+#define DMAMUX_SOURCE_FLEXPWM2_READ3		99
+#define DMAMUX_SOURCE_FLEXPWM2_WRITE0		100
+#define DMAMUX_SOURCE_FLEXPWM2_WRITE1		101
+#define DMAMUX_SOURCE_FLEXPWM2_WRITE2		102
+#define DMAMUX_SOURCE_FLEXPWM2_WRITE3		103
+#define DMAMUX_SOURCE_FLEXPWM4_READ0		104
+#define DMAMUX_SOURCE_FLEXPWM4_READ1		105
+#define DMAMUX_SOURCE_FLEXPWM4_READ2		106
+#define DMAMUX_SOURCE_FLEXPWM4_READ3		107
+#define DMAMUX_SOURCE_FLEXPWM4_WRITE0		108
+#define DMAMUX_SOURCE_FLEXPWM4_WRITE1		109
+#define DMAMUX_SOURCE_FLEXPWM4_WRITE2		110
+#define DMAMUX_SOURCE_FLEXPWM4_WRITE3		111
+#define DMAMUX_SOURCE_QTIMER2_READ0		112
+#define DMAMUX_SOURCE_QTIMER2_READ1		113
+#define DMAMUX_SOURCE_QTIMER2_READ2		114
+#define DMAMUX_SOURCE_QTIMER2_READ3		115
+#define DMAMUX_SOURCE_QTIMER2_WRITE0_CMPLD1	116
+#define DMAMUX_SOURCE_QTIMER2_WRITE1_CMPLD1	117
+#define DMAMUX_SOURCE_QTIMER2_WRITE2_CMPLD1	118
+#define DMAMUX_SOURCE_QTIMER2_WRITE3_CMPLD1	119
+#define DMAMUX_SOURCE_QTIMER2_WRITE1_CMPLD2	116
+#define DMAMUX_SOURCE_QTIMER2_WRITE0_CMPLD2	117
+#define DMAMUX_SOURCE_QTIMER2_WRITE3_CMPLD2	118
+#define DMAMUX_SOURCE_QTIMER2_WRITE2_CMPLD2	119
+#define DMAMUX_SOURCE_QTIMER4_READ0		120
+#define DMAMUX_SOURCE_QTIMER4_READ1		121
+#define DMAMUX_SOURCE_QTIMER4_READ2		122
+#define DMAMUX_SOURCE_QTIMER4_READ3		123
+#define DMAMUX_SOURCE_QTIMER4_WRITE0_CMPLD1	120
+#define DMAMUX_SOURCE_QTIMER4_WRITE1_CMPLD1	121
+#define DMAMUX_SOURCE_QTIMER4_WRITE2_CMPLD1	122
+#define DMAMUX_SOURCE_QTIMER4_WRITE3_CMPLD1	123
+#define DMAMUX_SOURCE_QTIMER4_WRITE1_CMPLD2	120
+#define DMAMUX_SOURCE_QTIMER4_WRITE0_CMPLD2	121
+#define DMAMUX_SOURCE_QTIMER4_WRITE3_CMPLD2	122
+#define DMAMUX_SOURCE_QTIMER4_WRITE2_CMPLD2	123
+#define DMAMUX_SOURCE_ENET2_TIMER0		124
+#define DMAMUX_SOURCE_ENET2_TIMER1		125
 
 
 typedef struct {
@@ -5647,6 +5795,13 @@ typedef struct {
 #define PIT_MCR				(IMXRT_PIT.offset000)
 #define PIT_LTMR64H			(IMXRT_PIT.offset0E0)
 #define PIT_LTMR64L			(IMXRT_PIT.offset0E4)
+typedef struct {
+	volatile uint32_t LDVAL;
+	volatile uint32_t CVAL;
+	volatile uint32_t TCTRL;
+	volatile uint32_t TFLG;
+} IMXRT_PIT_CHANNEL_t;
+#define IMXRT_PIT_CHANNELS		((IMXRT_PIT_CHANNEL_t *)(&(IMXRT_PIT.offset100)))
 #define PIT_LDVAL0			(IMXRT_PIT.offset100)
 #define PIT_CVAL0			(IMXRT_PIT.offset104)
 #define PIT_TCTRL0			(IMXRT_PIT.offset108)
@@ -6784,6 +6939,11 @@ typedef struct {
 #define XTALOSC24M_OSC_CONFIG2_TOG	(IMXRT_XTALOSC24M.offset2CC)
 
 
+// 0 = highest priority
+// Cortex-M7: 0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240
+#define NVIC_SET_PRIORITY(irqnum, priority)  (*((volatile uint8_t *)0xE000E400 + (irqnum)) = (uint8_t)(priority))
+#define NVIC_GET_PRIORITY(irqnum) (*((uint8_t *)0xE000E400 + (irqnum)))
+
 
 #define __disable_irq() __asm__ volatile("CPSID i":::"memory");
 #define __enable_irq()  __asm__ volatile("CPSIE i":::"memory");

teensy4/imxrt.ld

@@ -0,0 +1,72 @@
+MEMORY
+{
+	ITCM (rwx):  ORIGIN = 0x00000000, LENGTH = 128K
+	DTCM (rwx):  ORIGIN = 0x20000000, LENGTH = 128K
+	RAM (rwx):   ORIGIN = 0x20200000, LENGTH = 256K
+	FLASH (rwx): ORIGIN = 0x60000000, LENGTH = 1536K
+}
+
+ENTRY(ImageVectorTable)
+
+SECTIONS
+{
+	.text.progmem : {
+		KEEP(*(.flashconfig))
+		FILL(0xFF)
+		. = ORIGIN(FLASH) + 0x1000;
+		KEEP(*(.ivt))
+		KEEP(*(.bootdata))
+		KEEP(*(.vectors))
+		KEEP(*(.startup))
+		*(.progmem*)
+		. = ALIGN(16);
+	} > FLASH
+
+	.text : {
+		. = . + 32; /* MPU to trap NULL pointer deref */
+		*(.fastrun)
+		*(.text*)
+		. = ALIGN(16);
+	} > ITCM  AT> FLASH
+
+	.data : {
+		*(.rodata*)
+		*(.data*)
+		. = ALIGN(16);
+	} > DTCM  AT> FLASH
+
+	.bss : {
+		*(.bss*)
+		*(COMMON)
+		. = ALIGN(32);
+		. = . + 32; /* MPU to trap stack overflow */
+	} > DTCM
+
+	.bss.dma : {
+		*(.dmabuffers)
+		. = ALIGN(16);
+	} > RAM
+
+	_stext = ADDR(.text);
+	_etext = ADDR(.text) + SIZEOF(.text);
+	_stextload = LOADADDR(.text);
+
+	_sdata = ADDR(.data);
+	_edata = ADDR(.data) + SIZEOF(.data);
+	_sdataload = LOADADDR(.data);
+
+	_estack = ORIGIN(DTCM) + LENGTH(DTCM) - 16;
+
+	_sbss = ADDR(.bss);
+	_ebss = ADDR(.bss) + SIZEOF(.bss);
+
+	_flashimagelen = SIZEOF(.text.progmem) + SIZEOF(.text) + SIZEOF(.data);
+
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+
+}

teensy4/pins_arduino.h

@@ -0,0 +1,175 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2018 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef pins_macros_for_arduino_compatibility_h
+#define pins_macros_for_arduino_compatibility_h
+
+#include <stdint.h>
+
+// A0-A9 are always digital 14-23, for Arduino compatibility
+#define PIN_A0  (14)
+#define PIN_A1  (15)
+#define PIN_A2  (16)
+#define PIN_A3  (17)
+#define PIN_A4  (18)
+#define PIN_A5  (19)
+#define PIN_A6  (20)
+#define PIN_A7  (21)
+#define PIN_A8  (22)
+#define PIN_A9  (23)
+const static uint8_t A0 = PIN_A0;
+const static uint8_t A1 = PIN_A1;
+const static uint8_t A2 = PIN_A2;
+const static uint8_t A3 = PIN_A3;
+const static uint8_t A4 = PIN_A4;
+const static uint8_t A5 = PIN_A5;
+const static uint8_t A6 = PIN_A6;
+const static uint8_t A7 = PIN_A7;
+const static uint8_t A8 = PIN_A8;
+const static uint8_t A9 = PIN_A9;
+
+#if defined(__IMXRT1052__)
+#define PIN_A10 (24)
+#define PIN_A11 (25)
+const static uint8_t A10 = PIN_A10;
+const static uint8_t A11 = PIN_A11;
+#endif
+
+#define LED_BUILTIN   (13)
+
+#define PIN_SPI_SS    (10)
+#define PIN_SPI_MOSI  (11)
+#define PIN_SPI_MISO  (12)
+#define PIN_SPI_SCK   (13)
+const static uint8_t SS = 10;
+const static uint8_t MOSI = 11;
+const static uint8_t MISO = 12;
+const static uint8_t SCK = 13;
+
+#define PIN_WIRE_SDA  (18)
+#define PIN_WIRE_SCL  (19)
+const static uint8_t SDA = 18;
+const static uint8_t SCL = 19;
+
+#define PIN_SERIAL_RX (0)
+#define PIN_SERIAL_TX (1)
+
+
+#define NUM_DIGITAL_PINS  34
+#define NUM_ANALOG_INPUTS 12
+
+
+#define NOT_AN_INTERRUPT -1
+
+
+#if defined(__IMXRT1052__)
+  #define analogInputToDigitalPin(p) (((p) <= 9) ? (p) + 14 : (((p) >= 14 && (p) <= 25) ? (p) : -1))
+  #define digitalPinHasPWM(p) ((p) <= 15 || (p) == 18 || (p) == 19 || ((p) >= 22 && (p) <= 25) || ((p) >= 28 && (p) <= 31) || (p) == 33)
+  #define digitalPinToInterrupt(p)  ((p) < NUM_DIGITAL_PINS ? (p) : -1)
+#endif
+
+#define digitalPinToPCICR(p)    ((volatile uint8_t *)0)
+#define digitalPinToPCICRbit(p) (0)
+#define digitalPinToPCIFR(p)    ((volatile uint8_t *)0)
+#define digitalPinToPCIFRbit(p) (0)
+#define digitalPinToPCMSK(p)    ((volatile uint8_t *)0)
+#define digitalPinToPCMSKbit(p) (0)
+
+
+struct digital_pin_bitband_and_config_table_struct { // not really bitband, old name from Teensy3
+	volatile uint32_t *reg;
+	volatile uint32_t *mux;
+	volatile uint32_t *pad;
+	uint32_t mask;
+};
+extern const struct digital_pin_bitband_and_config_table_struct digital_pin_to_info_PGM[];
+#define digitalPinToPort(pin)    (pin)
+#define digitalPinToBitMask(pin) (digital_pin_to_info_PGM[(pin)].mask)
+#define portOutputRegister(pin)  ((digital_pin_to_info_PGM[(pin)].reg + 0))
+#define portSetRegister(pin)     ((digital_pin_to_info_PGM[(pin)].reg + 4))
+#define portClearRegister(pin)   ((digital_pin_to_info_PGM[(pin)].reg + 8))
+#define portToggleRegister(pin)  ((digital_pin_to_info_PGM[(pin)].reg + 12))
+#define portInputRegister(pin)   ((digital_pin_to_info_PGM[(pin)].reg + 16))
+#define portModeRegister(pin)    ((digital_pin_to_info_PGM[(pin)].reg + 20))
+#define portConfigRegister(pin)  ((digital_pin_to_info_PGM[(pin)].mux))
+#define digitalPinToPortReg(pin) (portOutputRegister(pin))
+#define digitalPinToBit(pin)     // TODO, is this needed?
+
+
+#define NOT_ON_TIMER 0
+static inline uint8_t digitalPinToTimer(uint8_t) __attribute__((always_inline, unused));
+static inline uint8_t digitalPinToTimer(uint8_t pin)
+{
+	// TODO: does anything meaningful use this?
+	return NOT_ON_TIMER;
+}
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+// pins are NOT connected to anything by default.
+//
+#if F_CPU >= 20000000 && !defined(USB_DISABLED)
+#define SERIAL_PORT_MONITOR		Serial
+#else
+#define SERIAL_PORT_MONITOR		Serial1
+#endif
+#define SERIAL_PORT_USBVIRTUAL		Serial
+#define SERIAL_PORT_HARDWARE		Serial1
+#define SERIAL_PORT_HARDWARE1		Serial2
+#define SERIAL_PORT_HARDWARE2		Serial3
+#define SERIAL_PORT_HARDWARE_OPEN	Serial1
+#define SERIAL_PORT_HARDWARE_OPEN1	Serial2
+#define SERIAL_PORT_HARDWARE_OPEN2	Serial3
+#define SERIAL_PORT_HARDWARE3		Serial4
+#define SERIAL_PORT_HARDWARE4		Serial5
+#define SERIAL_PORT_HARDWARE5		Serial6
+#define SERIAL_PORT_HARDWARE6		Serial7
+#define SERIAL_PORT_HARDWARE7		Serial8
+#define SERIAL_PORT_HARDWARE_OPEN3	Serial4
+#define SERIAL_PORT_HARDWARE_OPEN4	Serial5
+#define SERIAL_PORT_HARDWARE_OPEN5	Serial6
+#define SERIAL_PORT_HARDWARE_OPEN6	Serial7
+#define SERIAL_PORT_HARDWARE_OPEN7	Serial8
+
+#define SerialUSB			Serial
+
+#endif // pins_macros_for_arduino_compatibility_h

teensy4/startup.c

@@ -0,0 +1,299 @@
+#include "imxrt.h"
+#include "wiring.h"
+#include "debug/printf.h"
+
+// from the linker
+extern unsigned long _stextload;
+extern unsigned long _stext;
+extern unsigned long _etext;
+extern unsigned long _sdataload;
+extern unsigned long _sdata;
+extern unsigned long _edata;
+extern unsigned long _sbss;
+extern unsigned long _ebss;
+
+
+__attribute__ ((used, aligned(1024)))
+void (* _VectorsRam[160+16])(void);
+
+static void memory_copy(uint32_t *dest, const uint32_t *src, uint32_t *dest_end);
+static void memory_clear(uint32_t *dest, uint32_t *dest_end);
+static void configure_systick(void);
+extern void systick_isr(void);
+void configure_cache(void);
+void unused_interrupt_vector(void);
+
+
+__attribute__((section(".startup")))
+void ResetHandler(void)
+{
+	unsigned int i;
+
+	//force the stack to begin at some arbitrary location
+	//__asm__ volatile("mov sp, %0" : : "r" (0x20010000) : );
+
+	// pin 13 - if startup crashes, use this to turn on the LED early for troubleshooting
+	//IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03 = 5;
+	//IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_03 = IOMUXC_PAD_DSE(7);
+	//GPIO2_GDIR |= (1<<3);
+	//GPIO2_DR_SET = (1<<3);
+
+	memory_copy(&_stext, &_stextload, &_etext);
+	memory_copy(&_sdata, &_sdataload, &_edata);
+	memory_clear(&_sbss, &_ebss);
+
+	for (i=0; i < 176; i++) _VectorsRam[i] = &unused_interrupt_vector;
+	SCB_VTOR = (uint32_t)_VectorsRam;
+
+	// must enable PRINT_DEBUG_STUFF in debug/print.h
+	printf_init();
+	printf("\n***********IMXRT Startup**********\n");
+	printf("test %d %d %d\n", 1, -1234567, 3);
+
+	configure_cache();
+	configure_systick();
+#if 1
+
+	//uint32_t pll1;
+	//uint32_t n = 
+	//pll = CCM_ANALOG_PLL_ARM;
+	printf("ARM PLL = %08lX\n", CCM_ANALOG_PLL_ARM);
+
+	uint32_t cdcdr = CCM_CBCDR;
+	uint32_t cbcmr = CCM_CBCMR;
+	printf("AHB divisor = %ld\n", ((cdcdr >> 10) & 7) + 1);
+	printf("IPG divisor = %ld\n", ((cdcdr >> 8) & 3) + 1);
+
+	if (cdcdr & CCM_CBCDR_PERIPH_CLK_SEL) {
+		printf("using  periph_clk2_clk_divided\n");
+
+	} else {
+		printf("using  pre_periph_clk_sel\n");
+		uint32_t n = (cbcmr >> 19) & 3;
+		if (n == 0) {
+			printf("using PLL2\n");
+		} else if (n == 1) {
+			printf("using PLL2 PFD2\n");
+		} else if (n == 2) {
+			printf("using PLL2 PFD0\n");
+		} else {
+			printf("using PLL1\n");
+		}
+
+
+	}
+	//set_arm_clock(300000000);
+#endif
+
+
+	printf("before setup\n");
+	setup();
+	printf("after setup\n");
+	while (1) {
+		printf("loop\n");
+		loop();
+	}
+}
+
+
+
+
+// ARM SysTick is used for most Ardiuno timing functions, delay(), millis(),
+// micros().  SysTick can run from either the ARM core clock, or from an
+// "external" clock.  NXP documents it as "24 MHz XTALOSC can be the external
+// clock source of SYSTICK" (RT1052 ref manual, rev 1, page 411).  However,
+// NXP actually hid an undocumented divide-by-240 circuit in the hardware, so
+// the external clock is really 100 kHz.  We use this clock rather than the
+// ARM clock, to allow SysTick to maintain correct timing even when we change
+// the ARM clock to run at different speeds.
+#define SYSTICK_EXT_FREQ 100000
+
+static void configure_systick(void)
+{
+	_VectorsRam[15] = systick_isr;
+	SYST_RVR = (SYSTICK_EXT_FREQ / 1000) - 1;
+	SYST_CVR = 0;
+	SYST_CSR = SYST_CSR_TICKINT | SYST_CSR_ENABLE;
+	ARM_DEMCR |= ARM_DEMCR_TRCENA;
+	ARM_DWT_CTRL |= ARM_DWT_CTRL_CYCCNTENA; // turn on cycle counter
+}
+
+
+// concise defines for SCB_MPU_RASR and SCB_MPU_RBAR, ARM DDI0403E, pg 696
+#define NOEXEC		SCB_MPU_RASR_XN
+#define READONLY	SCB_MPU_RASR_AP(7)
+#define READWRITE	SCB_MPU_RASR_AP(3)
+#define NOACCESS	SCB_MPU_RASR_AP(0)
+#define MEM_CACHE_WT	SCB_MPU_RASR_TEX(0) | SCB_MPU_RASR_C
+#define MEM_CACHE_WB	SCB_MPU_RASR_TEX(0) | SCB_MPU_RASR_C | SCB_MPU_RASR_B
+#define MEM_CACHE_WBWA	SCB_MPU_RASR_TEX(1) | SCB_MPU_RASR_C | SCB_MPU_RASR_B
+#define MEM_NOCACHE	SCB_MPU_RASR_TEX(1)
+#define DEV_NOCACHE	SCB_MPU_RASR_TEX(2)
+#define SIZE_128K	(SCB_MPU_RASR_SIZE(16) | SCB_MPU_RASR_ENABLE)
+#define SIZE_256K	(SCB_MPU_RASR_SIZE(17) | SCB_MPU_RASR_ENABLE)
+#define SIZE_512K	(SCB_MPU_RASR_SIZE(18) | SCB_MPU_RASR_ENABLE)
+#define SIZE_1M		(SCB_MPU_RASR_SIZE(19) | SCB_MPU_RASR_ENABLE)
+#define SIZE_2M		(SCB_MPU_RASR_SIZE(20) | SCB_MPU_RASR_ENABLE)
+#define SIZE_4M		(SCB_MPU_RASR_SIZE(21) | SCB_MPU_RASR_ENABLE)
+#define SIZE_8M		(SCB_MPU_RASR_SIZE(22) | SCB_MPU_RASR_ENABLE)
+#define SIZE_16M	(SCB_MPU_RASR_SIZE(23) | SCB_MPU_RASR_ENABLE)
+#define SIZE_32M	(SCB_MPU_RASR_SIZE(24) | SCB_MPU_RASR_ENABLE)
+#define SIZE_64M	(SCB_MPU_RASR_SIZE(25) | SCB_MPU_RASR_ENABLE)
+#define REGION(n)	(SCB_MPU_RBAR_REGION(n) | SCB_MPU_RBAR_VALID)
+
+__attribute__((section(".progmem")))
+void configure_cache(void)
+{
+	//printf("MPU_TYPE = %08lX\n", SCB_MPU_TYPE);
+	//printf("CCR = %08lX\n", SCB_CCR);
+
+	// TODO: check if caches already active - skip?
+
+	SCB_MPU_CTRL = 0; // turn off MPU
+
+	SCB_MPU_RBAR = 0x00000000 | REGION(0); // ITCM
+	SCB_MPU_RASR = MEM_NOCACHE | READWRITE | SIZE_512K;
+
+	SCB_MPU_RBAR = 0x00200000 | REGION(1); // Boot ROM
+	SCB_MPU_RASR = MEM_CACHE_WT | READONLY | SIZE_128K;
+
+	SCB_MPU_RBAR = 0x20000000 | REGION(2); // DTCM
+	SCB_MPU_RASR = MEM_NOCACHE | READWRITE | NOEXEC | SIZE_512K;
+
+	SCB_MPU_RBAR = 0x20200000 | REGION(3); // RAM (AXI bus)
+	SCB_MPU_RASR = MEM_CACHE_WBWA | READWRITE | NOEXEC | SIZE_1M;
+
+	SCB_MPU_RBAR = 0x40000000 | REGION(4); // Peripherals
+	SCB_MPU_RASR = DEV_NOCACHE | READWRITE | NOEXEC | SIZE_64M;
+
+	SCB_MPU_RBAR = 0x60000000 | REGION(5); // QSPI Flash
+	SCB_MPU_RASR = MEM_CACHE_WBWA | READONLY | SIZE_16M;
+
+	// TODO: 32 byte sub-region at 0x00000000 with NOACCESS, to trap NULL pointer deref
+	// TODO: protect access to power supply config
+	// TODO: 32 byte sub-region at end of .bss section with NOACCESS, to trap stack overflow
+
+	SCB_MPU_CTRL = SCB_MPU_CTRL_ENABLE;
+
+	// cache enable, ARM DDI0403E, pg 628
+	asm("dsb");
+	asm("isb");
+	SCB_CACHE_ICIALLU = 0;
+
+	asm("dsb");
+	asm("isb");
+	SCB_CCR |= (SCB_CCR_IC | SCB_CCR_DC);
+}
+
+
+uint32_t set_arm_clock(uint32_t frequency)
+{
+	if (!(CCM_CBCDR & CCM_CBCDR_PERIPH_CLK_SEL)) {
+		//print("need to switch to stable clock while reconfigure of ARM PLL\n");
+		const uint32_t need1s = CCM_ANALOG_PLL_USB1_ENABLE | CCM_ANALOG_PLL_USB1_POWER |
+			CCM_ANALOG_PLL_USB1_LOCK | CCM_ANALOG_PLL_USB1_EN_USB_CLKS;
+		if ((CCM_ANALOG_PLL_USB1 & need1s) == need1s) {
+			//print("  run temporarily from USB/4 (120 MHz)\n");
+
+		} else {
+			//print("  run temporarily from crystal (24 MHz)\n");
+
+		}
+
+	} else {
+		//print("already running from an alternate clock, ok to mess with ARM PLL\n");
+	}
+
+	// if SYS PLL running at 528 MHz
+	//	if frequency == 528
+	//	if frequency == 396
+	//	if frequency == 352
+	//
+
+	return frequency;
+}
+
+
+
+__attribute__((section(".progmem")))
+void usb_pll_start()
+{
+	while (1) {
+		uint32_t n = CCM_ANALOG_PLL_USB1; // pg 759
+		//printf("CCM_ANALOG_PLL_USB1=%08lX\r\n", n);
+		if (n & CCM_ANALOG_PLL_USB1_DIV_SELECT) {
+			//print("  ERROR, 528 MHz mode!\r\n"); // never supposed to use this mode!
+			CCM_ANALOG_PLL_USB1_CLR = 0xC000;			// bypass 24 MHz
+			CCM_ANALOG_PLL_USB1_SET = CCM_ANALOG_PLL_USB1_BYPASS;	// bypass
+			CCM_ANALOG_PLL_USB1_CLR = CCM_ANALOG_PLL_USB1_POWER |	// power down
+				CCM_ANALOG_PLL_USB1_DIV_SELECT |		// use 480 MHz
+				CCM_ANALOG_PLL_USB1_ENABLE |			// disable
+				CCM_ANALOG_PLL_USB1_EN_USB_CLKS;		// disable usb
+			continue;
+		}
+		if (!(n & CCM_ANALOG_PLL_USB1_ENABLE)) {
+			//print("  enable PLL\r\n");
+			// TODO: should this be done so early, or later??
+			CCM_ANALOG_PLL_USB1_SET = CCM_ANALOG_PLL_USB1_ENABLE;
+			continue;
+		}
+		if (!(n & CCM_ANALOG_PLL_USB1_POWER)) {
+			//print("  power up PLL\r\n");
+			CCM_ANALOG_PLL_USB1_SET = CCM_ANALOG_PLL_USB1_POWER;
+			continue;
+		}
+		if (!(n & CCM_ANALOG_PLL_USB1_LOCK)) {
+			//print("  wait for lock\r\n");
+			continue;
+		}
+		if (n & CCM_ANALOG_PLL_USB1_BYPASS) {
+			//print("  turn off bypass\r\n");
+			CCM_ANALOG_PLL_USB1_CLR = CCM_ANALOG_PLL_USB1_BYPASS;
+			continue;
+		}
+		if (!(n & CCM_ANALOG_PLL_USB1_EN_USB_CLKS)) {
+			//print("  enable USB clocks\r\n");
+			CCM_ANALOG_PLL_USB1_SET = CCM_ANALOG_PLL_USB1_EN_USB_CLKS;
+			continue;
+		}
+		return; // everything is as it should be  :-)
+	}
+}
+
+void unused_interrupt_vector(void)
+{
+	// TODO: polling Serial to complete buffered transmits
+#if 1
+	IOMUXC_SW_MUX_CTL_PAD_GPIO_B0_03 = 5; // pin 13
+	IOMUXC_SW_PAD_CTL_PAD_GPIO_B0_03 = IOMUXC_PAD_DSE(7);
+	GPIO2_GDIR |= (1<<3);
+	GPIO2_DR_SET = (1<<3);
+	while (1) {
+		volatile uint32_t n;
+		GPIO2_DR_SET = (1<<3); //digitalWrite(13, HIGH);
+		for (n=0; n < 5000000; n++) ;
+		GPIO2_DR_CLEAR = (1<<3); //digitalWrite(13, LOW);
+		for (n=0; n < 4000000; n++) ;
+	}
+#else
+	while (1) {
+	}
+#endif
+}
+
+static void memory_copy(uint32_t *dest, const uint32_t *src, uint32_t *dest_end)
+{
+	if (dest == src) return;
+	while (dest < dest_end) {
+		*dest++ = *src++;
+	}
+}
+
+static void memory_clear(uint32_t *dest, uint32_t *dest_end)
+{
+	while (dest < dest_end) {
+		*dest++ = 0;
+	}
+}
+
+

teensy4/usb.c

@@ -0,0 +1,556 @@
+#include "usb_dev.h"
+#define USB_DESC_LIST_DEFINE
+#include "usb_desc.h"
+#include <string.h>
+
+// Use this for access to endpoint 1 for debug
+// https://github.com/BrandonLWhite/Stellaris-LaunchPad-UsbDevBulk-AutoWinusbInstall
+
+// device mode, page 3155
+
+typedef struct endpoint_struct endpoint_t;
+//typedef struct transfer_struct transfer_t;
+
+struct endpoint_struct {
+	uint32_t config;
+	uint32_t current;
+	uint32_t next;
+	uint32_t status;
+	uint32_t pointer0;
+	uint32_t pointer1;
+	uint32_t pointer2;
+	uint32_t pointer3;
+	uint32_t pointer4;
+	uint32_t reserved;
+	uint32_t setup0;
+	uint32_t setup1;
+	transfer_t *first_transfer;
+	transfer_t *last_transfer;
+	void (*callback_function)(transfer_t *completed_transfer);
+	uint32_t unused1;
+};
+
+/*struct transfer_struct {
+	uint32_t next;
+	uint32_t status;
+	uint32_t pointer0;
+	uint32_t pointer1;
+	uint32_t pointer2;
+	uint32_t pointer3;
+	uint32_t pointer4;
+	uint32_t callback_param;
+};*/
+
+endpoint_t endpoint_queue_head[(NUM_ENDPOINTS+1)*2] __attribute__ ((used, aligned(4096)));
+
+transfer_t endpoint0_transfer_data __attribute__ ((used, aligned(32)));
+transfer_t endpoint0_transfer_ack  __attribute__ ((used, aligned(32)));
+
+
+typedef union {
+ struct {
+  union {
+   struct {
+        uint8_t bmRequestType;
+        uint8_t bRequest;
+   };
+        uint16_t wRequestAndType;
+  };
+        uint16_t wValue;
+        uint16_t wIndex;
+        uint16_t wLength;
+ };
+ struct {
+        uint32_t word1;
+        uint32_t word2;
+ };
+	uint64_t bothwords;
+} setup_t;
+
+static setup_t endpoint0_setupdata;
+static uint32_t endpoint0_notify_mask=0;
+static uint32_t endpointN_notify_mask=0;
+//static int reset_count=0;
+volatile uint8_t usb_configuration = 0;
+static uint8_t endpoint0_buffer[8];
+
+
+static void isr(void);
+static void endpoint0_setup(uint64_t setupdata);
+static void endpoint0_transmit(const void *data, uint32_t len, int notify);
+static void endpoint0_receive(void *data, uint32_t len, int notify);
+static void endpoint0_complete(void);
+
+
+
+
+void usb_init(void)
+{
+	// TODO: make sure USB voltage regulator is running at full strength
+
+	// assume PLL3 is already running - already done by usb_pll_start() in main.c
+
+	CCM_CCGR6 |= CCM_CCGR6_USBOH3(CCM_CCGR_ON); // turn on clocks to USB peripheral
+	
+	// Before programming this register, the PHY clocks must be enabled in registers
+	// USBPHYx_CTRLn and CCM_ANALOG_USBPHYx_PLL_480_CTRLn.
+
+	//printf("USBPHY1_PWD=%08lX\r\n", USBPHY1_PWD);
+	//printf("USBPHY1_TX=%08lX\r\n", USBPHY1_TX);
+	//printf("USBPHY1_RX=%08lX\r\n", USBPHY1_RX);
+	//printf("USBPHY1_CTRL=%08lX\r\n", USBPHY1_CTRL);
+	//printf("USB1_USBMODE=%08lX\r\n", USB1_USBMODE);
+
+	// turn on PLL3, wait for 480 MHz lock?
+	// turn on CCM clock gates?  CCGR6[CG0]
+
+	if ((USBPHY1_PWD & (USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF | USBPHY_PWD_RXPWD1PT1
+	  | USBPHY_PWD_RXPWDENV | USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS
+	  | USBPHY_PWD_TXPWDFS)) || (USB1_USBMODE & USB_USBMODE_CM_MASK)) {
+		// USB controller is turned on from previous use
+		// reset needed to turn it off & start from clean slate
+		USBPHY1_CTRL_SET = USBPHY_CTRL_SFTRST; // USBPHY1_CTRL page 3292
+		USB1_USBCMD |= USB_USBCMD_RST; // reset controller
+		int count=0;
+		while (USB1_USBCMD & USB_USBCMD_RST) count++;
+		NVIC_CLEAR_PENDING(IRQ_USB1);
+		USBPHY1_CTRL_CLR = USBPHY_CTRL_SFTRST; // reset PHY
+		//USB1_USBSTS = USB1_USBSTS; // TODO: is this needed?
+		//printf("USB reset took %d loops\r\n", count);
+		//delay(10);
+		//print("\r\n");
+		//printf("USBPHY1_PWD=%08lX\r\n", USBPHY1_PWD);
+		//printf("USBPHY1_TX=%08lX\r\n", USBPHY1_TX);
+		//printf("USBPHY1_RX=%08lX\r\n", USBPHY1_RX);
+		//printf("USBPHY1_CTRL=%08lX\r\n", USBPHY1_CTRL);
+		//printf("USB1_USBMODE=%08lX\r\n", USB1_USBMODE);
+		//delay(500);
+	}
+
+	// Device Controller Initialization, page 3161
+	// USBCMD	pg 3216
+	// USBSTS	pg 3220
+	// USBINTR	pg 3224
+	// DEVICEADDR	pg 3227
+	// ENDPTLISTADDR   3229
+	// USBMODE	pg 3244
+	// ENDPTSETUPSTAT  3245
+	// ENDPTPRIME	pg 3246
+	// ENDPTFLUSH	pg 3247
+	// ENDPTSTAT	pg 3247
+	// ENDPTCOMPLETE   3248
+	// ENDPTCTRL0	pg 3249
+
+	USBPHY1_CTRL_CLR = USBPHY_CTRL_CLKGATE;
+	USBPHY1_PWD = 0;
+	//printf("USBPHY1_PWD=%08lX\r\n", USBPHY1_PWD);
+	//printf("USBPHY1_CTRL=%08lX\r\n", USBPHY1_CTRL);
+
+	USB1_USBMODE = USB_USBMODE_CM(2) | USB_USBMODE_SLOM;
+	memset(endpoint_queue_head, 0, sizeof(endpoint_queue_head));
+	endpoint_queue_head[0].config = (64 << 16) | (1 << 15);
+	endpoint_queue_head[1].config = (64 << 16);
+	USB1_ENDPOINTLISTADDR = (uint32_t)&endpoint_queue_head;
+	//  Recommended: enable all device interrupts including: USBINT, USBERRINT,
+	// Port Change Detect, USB Reset Received, DCSuspend.
+	USB1_USBINTR = USB_USBINTR_UE | USB_USBINTR_UEE | /* USB_USBINTR_PCE | */
+		USB_USBINTR_URE | USB_USBINTR_SLE;
+	//_VectorsRam[IRQ_USB1+16] = &isr;
+	attachInterruptVector(IRQ_USB1, &isr);
+	NVIC_ENABLE_IRQ(IRQ_USB1);
+	//printf("USB1_ENDPTCTRL0=%08lX\r\n", USB1_ENDPTCTRL0);
+	//printf("USB1_ENDPTCTRL1=%08lX\r\n", USB1_ENDPTCTRL1);
+	//printf("USB1_ENDPTCTRL2=%08lX\r\n", USB1_ENDPTCTRL2);
+	//printf("USB1_ENDPTCTRL3=%08lX\r\n", USB1_ENDPTCTRL3);
+	USB1_USBCMD |= USB_USBCMD_RS;
+}
+
+
+static void isr(void)
+{
+	//print("*");
+
+	//  Port control in device mode is only used for
+	//  status port reset, suspend, and current connect status.
+	uint32_t status = USB1_USBSTS;
+	USB1_USBSTS = status;
+
+	// USB_USBSTS_SLI - set to 1 when enters a suspend state from an active state
+	// USB_USBSTS_SRI - set at start of frame
+	// USB_USBSTS_SRI - set when USB reset detected
+
+	if (status & USB_USBSTS_UI) {
+		//print("data\r\n");
+		uint32_t setupstatus = USB1_ENDPTSETUPSTAT;
+		//printf("USB1_ENDPTSETUPSTAT=%X\r\n", setupstatus);
+		while (setupstatus) {
+			USB1_ENDPTSETUPSTAT = setupstatus;
+			setup_t s;
+			do {
+				USB1_USBCMD |= USB_USBCMD_SUTW;
+				s.word1 = endpoint_queue_head[0].setup0;
+				s.word2 = endpoint_queue_head[0].setup1;
+			} while (!(USB1_USBCMD & USB_USBCMD_SUTW));
+			USB1_USBCMD &= ~USB_USBCMD_SUTW;
+			//printf("setup %08lX %08lX\r\n", s.word1, s.word2);
+			USB1_ENDPTFLUSH = (1<<16) | (1<<0); // page 3174
+			while (USB1_ENDPTFLUSH & ((1<<16) | (1<<0))) ;
+			endpoint0_notify_mask = 0;
+			endpoint0_setup(s.bothwords);
+			setupstatus = USB1_ENDPTSETUPSTAT; // page 3175
+		}
+		uint32_t completestatus = USB1_ENDPTCOMPLETE;
+		if (completestatus) {
+			USB1_ENDPTCOMPLETE = completestatus;
+			//printf("USB1_ENDPTCOMPLETE=%lX\r\n", completestatus);
+			if (completestatus & endpoint0_notify_mask) {
+				endpoint0_notify_mask = 0;
+				endpoint0_complete();
+			}
+			if (completestatus & endpointN_notify_mask) {
+				// TODO: callback functions...
+			}
+		}
+	}
+	if (status & USB_USBSTS_URI) { // page 3164
+		USB1_ENDPTSETUPSTAT = USB1_ENDPTSETUPSTAT; // Clear all setup token semaphores
+		USB1_ENDPTCOMPLETE = USB1_ENDPTCOMPLETE; // Clear all the endpoint complete status
+		while (USB1_ENDPTPRIME != 0) ; // Wait for any endpoint priming
+		USB1_ENDPTFLUSH = 0xFFFFFFFF;  // Cancel all endpoint primed status
+		if ((USB1_PORTSC1 & USB_PORTSC1_PR)) {
+			//print("reset\r\n");
+		} else {
+			// we took too long to respond :(
+			// TODO; is this ever really a problem?
+			//print("reset too slow\r\n");
+		}
+		// TODO: Free all allocated dTDs 
+		//if (++reset_count >= 3) {
+			// shut off USB - easier to see results in protocol analyzer
+			//USB1_USBCMD &= ~USB_USBCMD_RS;
+			//print("shut off USB\r\n");
+		//}
+	}
+	if (status & USB_USBSTS_PCI) {
+		if (USB1_PORTSC1 & USB_PORTSC1_HSP) {
+			//print("port at 480 Mbit\r\n");
+		} else {
+			//print("port at 12 Mbit\r\n");
+		}
+	}
+	if (status & USB_USBSTS_SLI) { // page 3165
+		//print("suspend\r\n");
+	}
+	if (status & USB_USBSTS_UEI) {
+		//print("error\r\n");
+	}
+
+
+}
+
+
+/*
+struct transfer_struct { // table 55-60, pg 3159
+	uint32_t next;
+	uint32_t status;
+	uint32_t pointer0;
+	uint32_t pointer1;
+	uint32_t pointer2;
+	uint32_t pointer3;
+	uint32_t pointer4;
+	uint32_t unused1;
+};
+transfer_t endpoint0_transfer_data __attribute__ ((aligned(32)));;
+transfer_t endpoint0_transfer_ack  __attribute__ ((aligned(32)));;
+*/
+
+static void endpoint0_setup(uint64_t setupdata)
+{
+	setup_t setup;
+	uint32_t datalen = 0;
+	const usb_descriptor_list_t *list;
+
+	setup.bothwords = setupdata;
+	switch (setup.wRequestAndType) {
+	  case 0x0500: // SET_ADDRESS
+		endpoint0_receive(NULL, 0, 0);
+		USB1_DEVICEADDR = USB_DEVICEADDR_USBADR(setup.wValue) | USB_DEVICEADDR_USBADRA;
+		return;
+	  case 0x0900: // SET_CONFIGURATION
+		usb_configuration = setup.wValue;
+		// configure all other endpoints
+		volatile uint32_t *reg = &USB1_ENDPTCTRL1;
+		const uint32_t *cfg = usb_endpoint_config_table;
+		int i;
+		for (i=0; i < NUM_ENDPOINTS; i++) {
+			uint32_t n = *cfg++;
+			*reg = n;
+			// TODO: do the TRX & RXR bits self clear??
+			uint32_t m = n & ~(USB_ENDPTCTRL_TXR | USB_ENDPTCTRL_RXR);
+			*reg = m;
+			//uint32_t p = *reg;
+			//printf(" ep=%d: cfg=%08lX - %08lX - %08lX\r\n", i + 1, n, m, p);
+			reg++;
+		}
+		// TODO: configure all queue heads with max packet length, zlt & mult
+		endpoint_queue_head[CDC_ACM_ENDPOINT*2+1].config = (CDC_ACM_ENDPOINT << 16);
+		endpoint_queue_head[CDC_RX_ENDPOINT*2+0].config = (CDC_RX_SIZE << 16) | (1 << 29);
+		endpoint_queue_head[CDC_TX_ENDPOINT*2+1].config = (CDC_TX_SIZE << 16) | (1 << 29);
+
+		// TODO: de-allocate any pending transfers?
+		endpoint0_receive(NULL, 0, 0);
+		return;
+
+	  case 0x0680: // GET_DESCRIPTOR
+	  case 0x0681:
+		//printf("desc:\r\n");  // yay - sending device descriptor now works!!!!
+		for (list = usb_descriptor_list; list->addr != NULL; list++) {
+			if (setup.wValue == list->wValue && setup.wIndex == list->wIndex) {
+				if ((setup.wValue >> 8) == 3) {
+					// for string descriptors, use the descriptor's
+					// length field, allowing runtime configured length.
+					datalen = *(list->addr);
+				} else {
+					datalen = list->length;
+				}
+				if (datalen > setup.wLength) datalen = setup.wLength;
+				endpoint0_transmit(list->addr, datalen, 0);
+				return;
+			}
+		}
+		break;
+	  case 0x2221: // CDC_SET_CONTROL_LINE_STATE
+		//usb_cdc_line_rtsdtr_millis = systick_millis_count;
+		//usb_cdc_line_rtsdtr = setup.wValue;
+	  case 0x2321: // CDC_SEND_BREAK
+		endpoint0_receive(NULL, 0, 0);
+		return;
+	  case 0x2021: // CDC_SET_LINE_CODING
+		if (setup.wLength != 7) break;
+		endpoint0_setupdata.bothwords = setupdata;
+		endpoint0_receive(endpoint0_buffer, 7, 1);
+		return;
+	}
+	USB1_ENDPTCTRL0 = 0x000010001; // stall
+}
+
+static void endpoint0_transmit(const void *data, uint32_t len, int notify)
+{
+	//printf("tx %lu\r\n", len);
+	if (len > 0) {
+		// Executing A Transfer Descriptor, page 3182
+		endpoint0_transfer_data.next = 1;
+		endpoint0_transfer_data.status = (len << 16) | (1<<7);
+		uint32_t addr = (uint32_t)data;
+		endpoint0_transfer_data.pointer0 = addr; // format: table 55-60, pg 3159
+		endpoint0_transfer_data.pointer1 = addr + 4096;
+		endpoint0_transfer_data.pointer2 = addr + 8192;
+		endpoint0_transfer_data.pointer3 = addr + 12288;
+		endpoint0_transfer_data.pointer4 = addr + 16384;
+		//  Case 1: Link list is empty, page 3182
+		endpoint_queue_head[1].next = (uint32_t)&endpoint0_transfer_data;
+		endpoint_queue_head[1].status = 0;
+		USB1_ENDPTPRIME |= (1<<16);
+		while (USB1_ENDPTPRIME) ;
+	}
+	endpoint0_transfer_ack.next = 1;
+	endpoint0_transfer_ack.status = (1<<7) | (notify ? (1 << 15) : 0);
+	endpoint0_transfer_ack.pointer0 = 0;
+	endpoint_queue_head[0].next = (uint32_t)&endpoint0_transfer_ack;
+	endpoint_queue_head[0].status = 0;
+	USB1_ENDPTPRIME |= (1<<0);
+	endpoint0_notify_mask = (notify ? (1 << 0) : 0);
+	while (USB1_ENDPTPRIME) ;
+}
+
+static void endpoint0_receive(void *data, uint32_t len, int notify)
+{
+	//printf("rx %lu\r\n", len);
+	if (len > 0) {
+		// Executing A Transfer Descriptor, page 3182
+		endpoint0_transfer_data.next = 1;
+		endpoint0_transfer_data.status = (len << 16) | (1<<7);
+		uint32_t addr = (uint32_t)data;
+		endpoint0_transfer_data.pointer0 = addr; // format: table 55-60, pg 3159
+		endpoint0_transfer_data.pointer1 = addr + 4096;
+		endpoint0_transfer_data.pointer2 = addr + 8192;
+		endpoint0_transfer_data.pointer3 = addr + 12288;
+		endpoint0_transfer_data.pointer4 = addr + 16384;
+		//  Case 1: Link list is empty, page 3182
+		endpoint_queue_head[0].next = (uint32_t)&endpoint0_transfer_data;
+		endpoint_queue_head[0].status = 0;
+		USB1_ENDPTPRIME |= (1<<0);
+		while (USB1_ENDPTPRIME) ;
+	}
+	endpoint0_transfer_ack.next = 1;
+	endpoint0_transfer_ack.status = (1<<7) | (notify ? (1 << 15) : 0);
+	endpoint0_transfer_ack.pointer0 = 0;
+	endpoint_queue_head[1].next = (uint32_t)&endpoint0_transfer_ack;
+	endpoint_queue_head[1].status = 0;
+	USB1_ENDPTPRIME |= (1<<16);
+	endpoint0_notify_mask = (notify ? (1 << 16) : 0);
+	while (USB1_ENDPTPRIME) ;
+}
+
+/*typedef union {
+ struct {
+  union {
+   struct {
+        uint8_t bmRequestType;
+        uint8_t bRequest;
+   };
+        uint16_t wRequestAndType;
+  };
+        uint16_t wValue;
+        uint16_t wIndex;
+        uint16_t wLength;
+ };
+ struct {
+        uint32_t word1;
+        uint32_t word2;
+ };
+	uint64_t bothwords;
+} setup_t; */
+
+
+static void endpoint0_complete(void)
+{
+	setup_t setup;
+
+	setup.bothwords = endpoint0_setupdata.bothwords;
+	//print("complete\r\n");
+#ifdef CDC_STATUS_INTERFACE
+	if (setup.wRequestAndType == 0x2021 /*CDC_SET_LINE_CODING*/) {
+		//memcpy(usb_cdc_line_coding, endpoint0_buffer, 7);
+		//if (usb_cdc_line_coding[0] == 134) usb_reboot_timer = 15;
+	}
+#endif
+}
+
+void usb_prepare_transfer(transfer_t *transfer, const void *data, uint32_t len, uint32_t param)
+{
+	transfer->next = 1;
+	transfer->status = (len << 16) | (1<<7);
+	uint32_t addr = (uint32_t)data;
+	transfer->pointer0 = addr;
+	transfer->pointer1 = addr + 4096;
+	transfer->pointer2 = addr + 8192;
+	transfer->pointer3 = addr + 12288;
+	transfer->pointer4 = addr + 16384;
+	transfer->callback_param = param;
+}
+
+void usb_transmit(int endpoint_number, transfer_t *transfer)
+{
+	// endpoint 0 reserved for control
+	// endpoint 1 reserved for debug
+//printf("usb_transmit %d\r\n", endpoint_number);
+	if (endpoint_number < 2 || endpoint_number > NUM_ENDPOINTS) return;
+	endpoint_t *endpoint = &endpoint_queue_head[endpoint_number * 2 + 1];
+	if (endpoint->callback_function) {
+		transfer->status |= (1<<15);
+	} else {
+		transfer->status |= (1<<15);
+		// remove all inactive transfers
+	}
+	uint32_t mask = 1 << (endpoint_number + 16);
+	__disable_irq();
+#if 0
+	if (endpoint->last_transfer) {
+		if (!(endpoint->last_transfer->status & (1<<7))) {
+			endpoint->last_transfer->next = (uint32_t)transfer;
+		} else {
+			// Case 2: Link list is not empty, page 3182
+			endpoint->last_transfer->next = (uint32_t)transfer;
+			if (USB1_ENDPTPRIME & mask) {
+				endpoint->last_transfer = transfer;
+				__enable_irq();
+				printf(" case 2a\r\n");
+				return;
+			}
+			uint32_t stat;
+			uint32_t cmd = USB1_USBCMD;
+			do {
+				USB1_USBCMD = cmd | USB_USBCMD_ATDTW;
+				stat = USB1_ENDPTSTATUS;
+			} while (!(USB1_USBCMD & USB_USBCMD_ATDTW));
+			USB1_USBCMD = cmd & ~USB_USBCMD_ATDTW;
+			if (stat & mask) {
+				endpoint->last_transfer = transfer;
+				__enable_irq();
+				printf(" case 2b\r\n");
+				return;
+			}
+		}
+	} else {
+		endpoint->first_transfer = transfer;
+	}
+	endpoint->last_transfer = transfer;
+#endif
+	// Case 1: Link list is empty, page 3182
+	endpoint->next = (uint32_t)transfer;
+	endpoint->status = 0;
+	USB1_ENDPTPRIME |= mask;
+	while (USB1_ENDPTPRIME & mask) ;
+	__enable_irq();
+	//printf(" case 1\r\n");
+
+
+	// ENDPTPRIME - momentarily set by hardware during hardware re-priming
+	//		 operations when a dTD is retired, and the dQH is updated.
+
+	// ENDPTSTAT -   Transmit Buffer Ready - set to one by the hardware as a
+	//		 response to receiving a command from a corresponding bit
+	//		 in the ENDPTPRIME register.  . Buffer ready is cleared by
+	//		 USB reset, by the USB DMA system, or through the ENDPTFLUSH
+	//		 register.  (so 0=buffer ready, 1=buffer primed for transmit)
+
+}
+
+/*struct endpoint_struct {
+	uint32_t config;
+	uint32_t current;
+	uint32_t next;
+	uint32_t status;
+	uint32_t pointer0;
+	uint32_t pointer1;
+	uint32_t pointer2;
+	uint32_t pointer3;
+	uint32_t pointer4;
+	uint32_t reserved;
+	uint32_t setup0;
+	uint32_t setup1;
+	transfer_t *first_transfer;
+	transfer_t *last_transfer;
+	void (*callback_function)(transfer_t *completed_transfer);
+	uint32_t unused1;
+};*/
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

teensy4/usb_desc.h

@@ -0,0 +1,889 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#pragma once
+
+// This header is NOT meant to be included when compiling
+// user sketches in Arduino.  The low-level functions
+// provided by usb_dev.c are meant to be called only by
+// code which provides higher-level interfaces to the user.
+
+#include <stdint.h>
+#include <stddef.h>
+
+#define ENDPOINT_TRANSMIT_UNUSED	0x00020000
+#define ENDPOINT_TRANSMIT_ISOCHRONOUS	0x00C40000
+#define ENDPOINT_TRANSMIT_BULK		0x00C80000
+#define ENDPOINT_TRANSMIT_INTERRUPT	0x00CC0000
+#define ENDPOINT_RECEIVE_UNUSED		0x00000002
+#define ENDPOINT_RECEIVE_ISOCHRONOUS	0x000000C4
+#define ENDPOINT_RECEIVE_BULK		0x000000C8
+#define ENDPOINT_RECEIVE_INTERRUPT	0x000000CC
+
+/*
+Each group of #define lines below corresponds to one of the
+settings in the Tools > USB Type menu.  This file defines what
+type of USB device is actually created for each of those menu
+options.
+
+Each "interface" is a set of functionality your PC or Mac will
+use and treat as if it is a unique device.  Within each interface,
+the "endpoints" are the actual communication channels.  Most
+interfaces use 1, 2 or 3 endpoints.  By editing only this file,
+you can customize the USB Types to be any collection of interfaces.
+
+To modify a USB Type, delete the XYZ_INTERFACE lines for any
+interfaces you wish to remove, and copy them from another USB Type
+for any you want to add.
+
+Give each interface a unique number, and edit NUM_INTERFACE to
+reflect the total number of interfaces.
+
+Next, assign unique endpoint numbers to all the endpoints across
+all the interfaces your device has.  You can reuse an endpoint
+number for transmit and receive, but the same endpoint number must
+not be used twice to transmit, or twice to receive.
+
+Most endpoints also require their maximum size, and some also
+need an interval specification (the number of milliseconds the
+PC will check for data from that endpoint).  For existing
+interfaces, usually these other settings should not be changed.
+
+Edit NUM_ENDPOINTS to be at least the largest endpoint number used.
+
+Edit NUM_USB_BUFFERS to control how much memory the USB stack will
+allocate.  At least 2 should be used for each endpoint.  More
+memory will allow higher throughput for user programs that have
+high latency (eg, spending time doing things other than interacting
+with the USB).
+
+Edit the ENDPOINT*_CONFIG lines so each endpoint is configured
+the proper way (transmit, receive, or both).
+
+If you are using existing interfaces (making your own device with
+a different set of interfaces) the code in all other files should
+automatically adapt to the new endpoints you specify here.
+
+If you need to create a new type of interface, you'll need to write
+the code which sends and receives packets, and presents an API to
+the user.  Usually, a pair of files are added for the actual code,
+and code is also added in usb_dev.c for any control transfers,
+interrupt-level code, or other very low-level stuff not possible
+from the packet send/receive functons.  Code also is added in
+usb_inst.c to create an instance of your C++ object.  This message
+gives a quick summary of things you will need to know:
+https://forum.pjrc.com/threads/49045?p=164512&viewfull=1#post164512
+
+You may edit the Vendor and Product ID numbers, and strings.  If
+the numbers are changed, Teensyduino may not be able to automatically
+find and reboot your board when you click the Upload button in
+the Arduino IDE.  You will need to press the Program button on
+Teensy to initiate programming.
+
+Some operating systems, especially Windows, may cache USB device
+info.  Changes to the device name may not update on the same
+computer unless the vendor or product ID numbers change, or the
+"bcdDevice" revision code is increased.
+
+If these instructions are missing steps or could be improved, please
+let me know?  http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
+*/
+
+
+#if defined(USB_SERIAL)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0483
+  #define DEVICE_CLASS		2	// 2 = Communication Class
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'U','S','B',' ','S','e','r','i','a','l'}
+  #define PRODUCT_NAME_LEN	10
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS		4
+  #define NUM_USB_BUFFERS	12
+  #define NUM_INTERFACE		2
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1
+  #define CDC_ACM_ENDPOINT	2
+  #define CDC_RX_ENDPOINT       3
+  #define CDC_TX_ENDPOINT       4
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_INTERRUPT + ENDPOINT_TRANSMIT_UNUSED
+  #define ENDPOINT3_CONFIG	ENDPOINT_RECEIVE_BULK + ENDPOINT_TRANSMIT_UNUSED
+  #define ENDPOINT4_CONFIG      ENDPOINT_RECEIVE_UNUSED + ENDPOINT_TRANSMIT_BULK
+  //#define ENDPOINT2_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  //#define ENDPOINT3_CONFIG	ENDPOINT_RECEIVE_ONLY
+  //#define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+#elif defined(USB_KEYBOARDONLY)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x04D0
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'K','e','y','b','o','a','r','d'}
+  #define PRODUCT_NAME_LEN	8
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         4
+  #define NUM_USB_BUFFERS	14
+  #define NUM_INTERFACE		3
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define KEYBOARD_INTERFACE    0	// Keyboard
+  #define KEYBOARD_ENDPOINT     3
+  #define KEYBOARD_SIZE         8
+  #define KEYBOARD_INTERVAL     1
+  #define KEYMEDIA_INTERFACE    2	// Keyboard Media Keys
+  #define KEYMEDIA_ENDPOINT     4
+  #define KEYMEDIA_SIZE         8
+  #define KEYMEDIA_INTERVAL     4
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+#elif defined(USB_HID)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0482
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
+  #define PRODUCT_NAME_LEN	23
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         6
+  #define NUM_USB_BUFFERS	24
+  #define NUM_INTERFACE		5
+  #define SEREMU_INTERFACE      2	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define KEYBOARD_INTERFACE    0	// Keyboard
+  #define KEYBOARD_ENDPOINT     3
+  #define KEYBOARD_SIZE         8
+  #define KEYBOARD_INTERVAL     1
+  #define KEYMEDIA_INTERFACE    4	// Keyboard Media Keys
+  #define KEYMEDIA_ENDPOINT     6
+  #define KEYMEDIA_SIZE         8
+  #define KEYMEDIA_INTERVAL     4
+  #define MOUSE_INTERFACE       1	// Mouse
+  #define MOUSE_ENDPOINT        5
+  #define MOUSE_SIZE            8
+  #define MOUSE_INTERVAL        1
+  #define JOYSTICK_INTERFACE    3	// Joystick
+  #define JOYSTICK_ENDPOINT     4
+  #define JOYSTICK_SIZE         12	//  12 = normal, 64 = extreme joystick
+  #define JOYSTICK_INTERVAL     2
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+#elif defined(USB_SERIAL_HID)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0487
+  #define DEVICE_CLASS		0xEF
+  #define DEVICE_SUBCLASS	0x02
+  #define DEVICE_PROTOCOL	0x01
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'S','e','r','i','a','l','/','K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
+  #define PRODUCT_NAME_LEN	30
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS		7
+  #define NUM_USB_BUFFERS	30
+  #define NUM_INTERFACE		6
+  #define CDC_IAD_DESCRIPTOR	1
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1	// Serial
+  #define CDC_ACM_ENDPOINT	2
+  #define CDC_RX_ENDPOINT       3
+  #define CDC_TX_ENDPOINT       4
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define KEYBOARD_INTERFACE    2	// Keyboard
+  #define KEYBOARD_ENDPOINT     1
+  #define KEYBOARD_SIZE         8
+  #define KEYBOARD_INTERVAL     1
+  #define KEYMEDIA_INTERFACE    5	// Keyboard Media Keys
+  #define KEYMEDIA_ENDPOINT     7
+  #define KEYMEDIA_SIZE         8
+  #define KEYMEDIA_INTERVAL     4
+  #define MOUSE_INTERFACE       3	// Mouse
+  #define MOUSE_ENDPOINT        5
+  #define MOUSE_SIZE            8
+  #define MOUSE_INTERVAL        2
+  #define JOYSTICK_INTERFACE    4	// Joystick
+  #define JOYSTICK_ENDPOINT     6
+  #define JOYSTICK_SIZE         12	//  12 = normal, 64 = extreme joystick
+  #define JOYSTICK_INTERVAL     1
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT7_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+#elif defined(USB_TOUCHSCREEN)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x04D3
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'K','e','y','b','o','a','r','d','/','T','o','u','c','h','s','c','r','e','e','n'}
+  #define PRODUCT_NAME_LEN	20
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         5
+  #define NUM_USB_BUFFERS	15
+  #define NUM_INTERFACE		4
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define KEYBOARD_INTERFACE    0	// Keyboard
+  #define KEYBOARD_ENDPOINT     3
+  #define KEYBOARD_SIZE         8
+  #define KEYBOARD_INTERVAL     1
+  #define KEYMEDIA_INTERFACE    2	// Keyboard Media Keys
+  #define KEYMEDIA_ENDPOINT     4
+  #define KEYMEDIA_SIZE         8
+  #define KEYMEDIA_INTERVAL     4
+  #define MULTITOUCH_INTERFACE  3	// Touchscreen
+  #define MULTITOUCH_ENDPOINT   5
+  #define MULTITOUCH_SIZE       8
+  #define MULTITOUCH_FINGERS    10
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+#elif defined(USB_HID_TOUCHSCREEN)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x04D4
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','T','o','u','c','h','s','c','r','e','e','n'}
+  #define PRODUCT_NAME_LEN	26
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         6
+  #define NUM_USB_BUFFERS	20
+  #define NUM_INTERFACE		5
+  #define SEREMU_INTERFACE      2	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define KEYBOARD_INTERFACE    0	// Keyboard
+  #define KEYBOARD_ENDPOINT     3
+  #define KEYBOARD_SIZE         8
+  #define KEYBOARD_INTERVAL     1
+  #define KEYMEDIA_INTERFACE    3	// Keyboard Media Keys
+  #define KEYMEDIA_ENDPOINT     4
+  #define KEYMEDIA_SIZE         8
+  #define KEYMEDIA_INTERVAL     4
+  #define MOUSE_INTERFACE       1	// Mouse
+  #define MOUSE_ENDPOINT        6
+  #define MOUSE_SIZE            8
+  #define MOUSE_INTERVAL        2
+  #define MULTITOUCH_INTERFACE  4	// Touchscreen
+  #define MULTITOUCH_ENDPOINT   5
+  #define MULTITOUCH_SIZE       8
+  #define MULTITOUCH_FINGERS    10
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+#elif defined(USB_MIDI)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0485
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I'}
+  #define PRODUCT_NAME_LEN	11
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         4
+  #define NUM_USB_BUFFERS	16
+  #define NUM_INTERFACE		2
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define MIDI_INTERFACE        0	// MIDI
+  #define MIDI_NUM_CABLES       1
+  #define MIDI_TX_ENDPOINT      3
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      4
+  #define MIDI_RX_SIZE          64
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_MIDI4)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0485
+  #define BCD_DEVICE		0x0211
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I','x','4'}
+  #define PRODUCT_NAME_LEN	13
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         4
+  #define NUM_USB_BUFFERS	16
+  #define NUM_INTERFACE		2
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define MIDI_INTERFACE        0	// MIDI
+  #define MIDI_NUM_CABLES       4
+  #define MIDI_TX_ENDPOINT      3
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      4
+  #define MIDI_RX_SIZE          64
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_MIDI16)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0485
+  #define BCD_DEVICE		0x0212
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I','x','1','6'}
+  #define PRODUCT_NAME_LEN	14
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         4
+  #define NUM_USB_BUFFERS	16
+  #define NUM_INTERFACE		2
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define MIDI_INTERFACE        0	// MIDI
+  #define MIDI_NUM_CABLES       16
+  #define MIDI_TX_ENDPOINT      3
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      4
+  #define MIDI_RX_SIZE          64
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_MIDI_SERIAL)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0489
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I'}
+  #define PRODUCT_NAME_LEN	11
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         5
+  #define NUM_USB_BUFFERS	30
+  #define NUM_INTERFACE		3
+  #define CDC_IAD_DESCRIPTOR	1
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1	// Serial
+  #define CDC_ACM_ENDPOINT	1
+  #define CDC_RX_ENDPOINT       2
+  #define CDC_TX_ENDPOINT       3
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define MIDI_INTERFACE        2	// MIDI
+  #define MIDI_NUM_CABLES       1
+  #define MIDI_TX_ENDPOINT      4
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      5
+  #define MIDI_RX_SIZE          64
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_MIDI4_SERIAL)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0489
+  #define BCD_DEVICE		0x0211
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I','x','4'}
+  #define PRODUCT_NAME_LEN	13
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         5
+  #define NUM_USB_BUFFERS	30
+  #define NUM_INTERFACE		3
+  #define CDC_IAD_DESCRIPTOR	1
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1	// Serial
+  #define CDC_ACM_ENDPOINT	1
+  #define CDC_RX_ENDPOINT       2
+  #define CDC_TX_ENDPOINT       3
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define MIDI_INTERFACE        2	// MIDI
+  #define MIDI_NUM_CABLES       4
+  #define MIDI_TX_ENDPOINT      4
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      5
+  #define MIDI_RX_SIZE          64
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_MIDI16_SERIAL)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0489
+  #define BCD_DEVICE		0x0212
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I','x','1','6'}
+  #define PRODUCT_NAME_LEN	14
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         5
+  #define NUM_USB_BUFFERS	30
+  #define NUM_INTERFACE		3
+  #define CDC_IAD_DESCRIPTOR	1
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1	// Serial
+  #define CDC_ACM_ENDPOINT	1
+  #define CDC_RX_ENDPOINT       2
+  #define CDC_TX_ENDPOINT       3
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define MIDI_INTERFACE        2	// MIDI
+  #define MIDI_NUM_CABLES       16
+  #define MIDI_TX_ENDPOINT      4
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      5
+  #define MIDI_RX_SIZE          64
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_RAWHID)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0486
+  #define RAWHID_USAGE_PAGE	0xFFAB  // recommended: 0xFF00 to 0xFFFF
+  #define RAWHID_USAGE		0x0200  // recommended: 0x0100 to 0xFFFF
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y','d','u','i','n','o',' ','R','a','w','H','I','D'}
+  #define PRODUCT_NAME_LEN	18
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         4
+  #define NUM_USB_BUFFERS	12
+  #define NUM_INTERFACE		2
+  #define RAWHID_INTERFACE      0	// RawHID
+  #define RAWHID_TX_ENDPOINT    3
+  #define RAWHID_TX_SIZE        64
+  #define RAWHID_TX_INTERVAL    1
+  #define RAWHID_RX_ENDPOINT    4
+  #define RAWHID_RX_SIZE        64
+  #define RAWHID_RX_INTERVAL    1
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_FLIGHTSIM)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0488
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','F','l','i','g','h','t',' ','S','i','m',' ','C','o','n','t','r','o','l','s'}
+  #define PRODUCT_NAME_LEN	26
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         4
+  #define NUM_USB_BUFFERS	20
+  #define NUM_INTERFACE		2
+  #define FLIGHTSIM_INTERFACE	0	// Flight Sim Control
+  #define FLIGHTSIM_TX_ENDPOINT	3
+  #define FLIGHTSIM_TX_SIZE	64
+  #define FLIGHTSIM_TX_INTERVAL	1
+  #define FLIGHTSIM_RX_ENDPOINT	4
+  #define FLIGHTSIM_RX_SIZE	64
+  #define FLIGHTSIM_RX_INTERVAL	1
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_FLIGHTSIM_JOYSTICK)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0488
+  #define BCD_DEVICE		0x0211
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','F','l','i','g','h','t',' ','S','i','m',' ','C','o','n','t','r','o','l','s'}
+  #define PRODUCT_NAME_LEN	26
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         5
+  #define NUM_USB_BUFFERS	20
+  #define NUM_INTERFACE		3
+  #define FLIGHTSIM_INTERFACE	0	// Flight Sim Control
+  #define FLIGHTSIM_TX_ENDPOINT	3
+  #define FLIGHTSIM_TX_SIZE	64
+  #define FLIGHTSIM_TX_INTERVAL	1
+  #define FLIGHTSIM_RX_ENDPOINT	4
+  #define FLIGHTSIM_RX_SIZE	64
+  #define FLIGHTSIM_RX_INTERVAL	1
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define JOYSTICK_INTERFACE    2	// Joystick
+  #define JOYSTICK_ENDPOINT     5
+  #define JOYSTICK_SIZE         12	//  12 = normal, 64 = extreme joystick
+  #define JOYSTICK_INTERVAL     1
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+
+#elif defined(USB_MTPDISK)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x04D1
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','T','P',' ','D','i','s','k'}
+  #define PRODUCT_NAME_LEN	15
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         4
+  #define NUM_USB_BUFFERS	20
+  #define NUM_INTERFACE		2
+  #define MTP_INTERFACE		0	// MTP Disk
+  #define MTP_TX_ENDPOINT	3
+  #define MTP_TX_SIZE		64
+  #define MTP_RX_ENDPOINT	3
+  #define MTP_RX_SIZE		64
+  #define MTP_EVENT_ENDPOINT	4
+  #define MTP_EVENT_SIZE	16
+  #define MTP_EVENT_INTERVAL	10
+  #define SEREMU_INTERFACE      1	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_AND_RECEIVE
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_AUDIO)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x04D2
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','A','u','d','i','o'}
+  #define PRODUCT_NAME_LEN	12
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         5
+  #define NUM_USB_BUFFERS	16
+  #define NUM_INTERFACE		4
+  #define SEREMU_INTERFACE      0	// Serial emulation
+  #define SEREMU_TX_ENDPOINT    1
+  #define SEREMU_TX_SIZE        64
+  #define SEREMU_TX_INTERVAL    1
+  #define SEREMU_RX_ENDPOINT    2
+  #define SEREMU_RX_SIZE        32
+  #define SEREMU_RX_INTERVAL    2
+  #define AUDIO_INTERFACE	1	// Audio (uses 3 consecutive interfaces)
+  #define AUDIO_TX_ENDPOINT     3
+  #define AUDIO_TX_SIZE         180
+  #define AUDIO_RX_ENDPOINT     4
+  #define AUDIO_RX_SIZE         180
+  #define AUDIO_SYNC_ENDPOINT	5
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ISOCHRONOUS
+  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ISOCHRONOUS
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ISOCHRONOUS
+
+#elif defined(USB_MIDI_AUDIO_SERIAL)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x048A
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I','/','A','u','d','i','o'}
+  #define PRODUCT_NAME_LEN	17
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         8
+  #define NUM_USB_BUFFERS	30
+  #define NUM_INTERFACE		6
+  #define CDC_IAD_DESCRIPTOR	1
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1	// Serial
+  #define CDC_ACM_ENDPOINT	1
+  #define CDC_RX_ENDPOINT       2
+  #define CDC_TX_ENDPOINT       3
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define MIDI_INTERFACE        2	// MIDI
+  #define MIDI_NUM_CABLES       1
+  #define MIDI_TX_ENDPOINT      4
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      5
+  #define MIDI_RX_SIZE          64
+  #define AUDIO_INTERFACE	3	// Audio (uses 3 consecutive interfaces)
+  #define AUDIO_TX_ENDPOINT     6
+  #define AUDIO_TX_SIZE         180
+  #define AUDIO_RX_ENDPOINT     7
+  #define AUDIO_RX_SIZE         180
+  #define AUDIO_SYNC_ENDPOINT	8
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ISOCHRONOUS
+  #define ENDPOINT7_CONFIG	ENDPOINT_RECEIVE_ISOCHRONOUS
+  #define ENDPOINT8_CONFIG	ENDPOINT_TRANSMIT_ISOCHRONOUS
+
+#elif defined(USB_MIDI16_AUDIO_SERIAL)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x048A
+  #define BCD_DEVICE		0x0212
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I','x','1','6','/','A','u','d','i','o'}
+  #define PRODUCT_NAME_LEN	20
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         8
+  #define NUM_USB_BUFFERS	30
+  #define NUM_INTERFACE		6
+  #define CDC_IAD_DESCRIPTOR	1
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1	// Serial
+  #define CDC_ACM_ENDPOINT	1
+  #define CDC_RX_ENDPOINT       2
+  #define CDC_TX_ENDPOINT       3
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define MIDI_INTERFACE        2	// MIDI
+  #define MIDI_NUM_CABLES       16
+  #define MIDI_TX_ENDPOINT      4
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      5
+  #define MIDI_RX_SIZE          64
+  #define AUDIO_INTERFACE	3	// Audio (uses 3 consecutive interfaces)
+  #define AUDIO_TX_ENDPOINT     6
+  #define AUDIO_TX_SIZE         180
+  #define AUDIO_RX_ENDPOINT     7
+  #define AUDIO_RX_SIZE         180
+  #define AUDIO_SYNC_ENDPOINT	8
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_RECEIVE_ONLY
+  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ISOCHRONOUS
+  #define ENDPOINT7_CONFIG	ENDPOINT_RECEIVE_ISOCHRONOUS
+  #define ENDPOINT8_CONFIG	ENDPOINT_TRANSMIT_ISOCHRONOUS
+
+#elif defined(USB_EVERYTHING)
+  #define VENDOR_ID		0x16C0
+  #define PRODUCT_ID		0x0476
+  #define RAWHID_USAGE_PAGE	0xFFAB  // recommended: 0xFF00 to 0xFFFF
+  #define RAWHID_USAGE		0x0200  // recommended: 0x0100 to 0xFFFF
+  #define DEVICE_CLASS		0xEF
+  #define DEVICE_SUBCLASS	0x02
+  #define DEVICE_PROTOCOL	0x01
+  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
+  #define MANUFACTURER_NAME_LEN	11
+  #define PRODUCT_NAME		{'A','l','l',' ','T','h','e',' ','T','h','i','n','g','s'}
+  #define PRODUCT_NAME_LEN	14
+  #define EP0_SIZE		64
+  #define NUM_ENDPOINTS         15
+  #define NUM_USB_BUFFERS	31
+  #define NUM_INTERFACE		13
+  #define CDC_IAD_DESCRIPTOR	1
+  #define CDC_STATUS_INTERFACE	0
+  #define CDC_DATA_INTERFACE	1	// Serial
+  #define CDC_ACM_ENDPOINT	1
+  #define CDC_RX_ENDPOINT       2
+  #define CDC_TX_ENDPOINT       2
+  #define CDC_ACM_SIZE          16
+  #define CDC_RX_SIZE           64
+  #define CDC_TX_SIZE           64
+  #define MIDI_INTERFACE        2	// MIDI
+  #define MIDI_NUM_CABLES       16
+  #define MIDI_TX_ENDPOINT      3
+  #define MIDI_TX_SIZE          64
+  #define MIDI_RX_ENDPOINT      3
+  #define MIDI_RX_SIZE          64
+  #define KEYBOARD_INTERFACE    3	// Keyboard
+  #define KEYBOARD_ENDPOINT     4
+  #define KEYBOARD_SIZE         8
+  #define KEYBOARD_INTERVAL     1
+  #define MOUSE_INTERFACE       4	// Mouse
+  #define MOUSE_ENDPOINT        5
+  #define MOUSE_SIZE            8
+  #define MOUSE_INTERVAL        2
+  #define RAWHID_INTERFACE      5	// RawHID
+  #define RAWHID_TX_ENDPOINT    6
+  #define RAWHID_TX_SIZE        64
+  #define RAWHID_TX_INTERVAL    1
+  #define RAWHID_RX_ENDPOINT    6
+  #define RAWHID_RX_SIZE        64
+  #define RAWHID_RX_INTERVAL    1
+  #define FLIGHTSIM_INTERFACE	6	// Flight Sim Control
+  #define FLIGHTSIM_TX_ENDPOINT	9
+  #define FLIGHTSIM_TX_SIZE	64
+  #define FLIGHTSIM_TX_INTERVAL	1
+  #define FLIGHTSIM_RX_ENDPOINT	9
+  #define FLIGHTSIM_RX_SIZE	64
+  #define FLIGHTSIM_RX_INTERVAL	1
+  #define JOYSTICK_INTERFACE    7	// Joystick
+  #define JOYSTICK_ENDPOINT     10
+  #define JOYSTICK_SIZE         12	//  12 = normal, 64 = extreme joystick
+  #define JOYSTICK_INTERVAL     1
+/*
+  #define MTP_INTERFACE		8	// MTP Disk
+  #define MTP_TX_ENDPOINT	11
+  #define MTP_TX_SIZE		64
+  #define MTP_RX_ENDPOINT	3
+  #define MTP_RX_SIZE		64
+  #define MTP_EVENT_ENDPOINT	11
+  #define MTP_EVENT_SIZE	16
+  #define MTP_EVENT_INTERVAL	10
+*/
+  #define KEYMEDIA_INTERFACE    8	// Keyboard Media Keys
+  #define KEYMEDIA_ENDPOINT     12
+  #define KEYMEDIA_SIZE         8
+  #define KEYMEDIA_INTERVAL     4
+  #define AUDIO_INTERFACE	9	// Audio (uses 3 consecutive interfaces)
+  #define AUDIO_TX_ENDPOINT     13
+  #define AUDIO_TX_SIZE         180
+  #define AUDIO_RX_ENDPOINT     13
+  #define AUDIO_RX_SIZE         180
+  #define AUDIO_SYNC_ENDPOINT	14
+  #define MULTITOUCH_INTERFACE  12	// Touchscreen
+  #define MULTITOUCH_ENDPOINT   15
+  #define MULTITOUCH_SIZE       8
+  #define MULTITOUCH_FINGERS    10
+  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT2_CONFIG	ENDPOINT_TRANSMIT_AND_RECEIVE
+  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_AND_RECEIVE
+  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_AND_RECEIVE
+  #define ENDPOINT7_CONFIG	ENDPOINT_TRANSMIT_AND_RECEIVE
+  #define ENDPOINT8_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT9_CONFIG	ENDPOINT_TRANSMIT_AND_RECEIVE
+  #define ENDPOINT10_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT11_CONFIG	ENDPOINT_TRANSMIT_AND_RECEIVE
+  #define ENDPOINT12_CONFIG	ENDPOINT_TRANSMIT_ONLY
+  #define ENDPOINT13_CONFIG	(ENDPOINT_RECEIVE_ISOCHRONOUS|ENDPOINT_TRANSMIT_ISOCHRONOUS)
+  #define ENDPOINT14_CONFIG	ENDPOINT_TRANSMIT_ISOCHRONOUS
+  #define ENDPOINT15_CONFIG	ENDPOINT_TRANSMIT_ONLY
+
+#endif
+
+#ifdef USB_DESC_LIST_DEFINE
+#if defined(NUM_ENDPOINTS) && NUM_ENDPOINTS > 0
+// NUM_ENDPOINTS = number of non-zero endpoints (0 to 7)
+extern const uint32_t usb_endpoint_config_table[NUM_ENDPOINTS];
+
+typedef struct {
+	uint16_t	wValue;
+	uint16_t	wIndex;
+	const uint8_t	*addr;
+	uint16_t	length;
+} usb_descriptor_list_t;
+
+extern const usb_descriptor_list_t usb_descriptor_list[];
+#endif // NUM_ENDPOINTS
+#endif // USB_DESC_LIST_DEFINE
+

teensy4/usb_dev.h

@@ -0,0 +1,21 @@
+#pragma once
+#include "imxrt.h"
+
+typedef struct transfer_struct transfer_t;
+struct transfer_struct {
+        uint32_t next;
+        uint32_t status;
+        uint32_t pointer0;
+        uint32_t pointer1;
+        uint32_t pointer2;
+        uint32_t pointer3;
+        uint32_t pointer4;
+        uint32_t callback_param;
+};
+
+void usb_init(void);
+
+void usb_prepare_transfer(transfer_t *transfer, const void *data, uint32_t len, uint32_t param);
+void usb_transmit(int endpoint_number, transfer_t *transfer);
+
+

teensy4/usb_names.h

@@ -0,0 +1,57 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _usb_names_h_
+#define _usb_names_h_
+
+// These definitions are intended to allow users to override the default
+// USB manufacturer, product and serial number strings.
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct usb_string_descriptor_struct {
+	uint8_t bLength;
+	uint8_t bDescriptorType;
+	uint16_t wString[];
+};
+
+extern struct usb_string_descriptor_struct usb_string_manufacturer_name;
+extern struct usb_string_descriptor_struct usb_string_product_name;
+extern struct usb_string_descriptor_struct usb_string_serial_number;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

teensy4/usb_serial.c

@@ -0,0 +1,337 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "usb_dev.h"
+#include "usb_serial.h"
+//#include "delay.h" // for yield()
+//#include "HardwareSerial.h"
+#include <string.h> // for memcpy()
+
+// defined by usb_dev.h -> usb_desc.h
+#if defined(CDC_STATUS_INTERFACE) && defined(CDC_DATA_INTERFACE)
+//#if F_CPU >= 20000000
+
+uint32_t usb_cdc_line_coding[2];
+volatile uint32_t usb_cdc_line_rtsdtr_millis;
+volatile uint8_t usb_cdc_line_rtsdtr=0;
+volatile uint8_t usb_cdc_transmit_flush_timer=0;
+
+//static usb_packet_t *rx_packet=NULL;
+//static usb_packet_t *tx_packet=NULL;
+static volatile uint8_t tx_noautoflush=0;
+
+#define TRANSMIT_FLUSH_TIMEOUT	5   /* in milliseconds */
+
+// get the next character, or -1 if nothing received
+int usb_serial_getchar(void)
+{
+#if 0
+	unsigned int i;
+	int c;
+
+	if (!rx_packet) {
+		if (!usb_configuration) return -1;
+		rx_packet = usb_rx(CDC_RX_ENDPOINT);
+		if (!rx_packet) return -1;
+	}
+	i = rx_packet->index;
+	c = rx_packet->buf[i++];
+	if (i >= rx_packet->len) {
+		usb_free(rx_packet);
+		rx_packet = NULL;
+	} else {
+		rx_packet->index = i;
+	}
+	return c;
+#endif
+	return -1;
+}
+
+// peek at the next character, or -1 if nothing received
+int usb_serial_peekchar(void)
+{
+#if 0
+	if (!rx_packet) {
+		if (!usb_configuration) return -1;
+		rx_packet = usb_rx(CDC_RX_ENDPOINT);
+		if (!rx_packet) return -1;
+	}
+	if (!rx_packet) return -1;
+	return rx_packet->buf[rx_packet->index];
+#endif
+	return -1;
+}
+
+// number of bytes available in the receive buffer
+int usb_serial_available(void)
+{
+#if 0
+	int count;
+	count = usb_rx_byte_count(CDC_RX_ENDPOINT);
+	if (rx_packet) count += rx_packet->len - rx_packet->index;
+	return count;
+#endif
+	return 0;
+}
+
+// read a block of bytes to a buffer
+int usb_serial_read(void *buffer, uint32_t size)
+{
+#if 0
+	uint8_t *p = (uint8_t *)buffer;
+	uint32_t qty, count=0;
+
+	while (size) {
+		if (!usb_configuration) break;
+		if (!rx_packet) {
+			rx:
+			rx_packet = usb_rx(CDC_RX_ENDPOINT);
+			if (!rx_packet) break;
+			if (rx_packet->len == 0) {
+				usb_free(rx_packet);
+				goto rx;
+			}
+		}
+		qty = rx_packet->len - rx_packet->index;
+		if (qty > size) qty = size;
+		memcpy(p, rx_packet->buf + rx_packet->index, qty);
+		p += qty;
+		count += qty;
+		size -= qty;
+		rx_packet->index += qty;
+		if (rx_packet->index >= rx_packet->len) {
+			usb_free(rx_packet);
+			rx_packet = NULL;
+		}
+	}
+	return count;
+#endif
+	return 0;
+}
+
+// discard any buffered input
+void usb_serial_flush_input(void)
+{
+#if 0
+	usb_packet_t *rx;
+
+	if (!usb_configuration) return;
+	if (rx_packet) {
+		usb_free(rx_packet);
+		rx_packet = NULL;
+	}
+	while (1) {
+		rx = usb_rx(CDC_RX_ENDPOINT);
+		if (!rx) break;
+		usb_free(rx);
+	}
+#endif
+}
+
+// Maximum number of transmit packets to queue so we don't starve other endpoints for memory
+//#define TX_PACKET_LIMIT 8
+
+// When the PC isn't listening, how long do we wait before discarding data?  If this is
+// too short, we risk losing data during the stalls that are common with ordinary desktop
+// software.  If it's too long, we stall the user's program when no software is running.
+#define TX_TIMEOUT_MSEC 70
+
+/*#if F_CPU == 240000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 1600)
+#elif F_CPU == 216000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 1440)
+#elif F_CPU == 192000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 1280)
+#elif F_CPU == 180000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 1200)
+#elif F_CPU == 168000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 1100)
+#elif F_CPU == 144000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 932)
+#elif F_CPU == 120000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 764)
+#elif F_CPU == 96000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 596)
+#elif F_CPU == 72000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 512)
+#elif F_CPU == 48000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 428)
+#elif F_CPU == 24000000
+  #define TX_TIMEOUT (TX_TIMEOUT_MSEC * 262)
+#endif */
+
+// When we've suffered the transmit timeout, don't wait again until the computer
+// begins accepting data.  If no software is running to receive, we'll just discard
+// data as rapidly as Serial.print() can generate it, until there's something to
+// actually receive it.
+//static uint8_t transmit_previous_timeout=0;
+
+
+// transmit a character.  0 returned on success, -1 on error
+int usb_serial_putchar(uint8_t c)
+{
+	return usb_serial_write(&c, 1);
+}
+
+
+static transfer_t transfer __attribute__ ((used, aligned(32)));
+static uint8_t txbuffer[256];
+
+int usb_serial_write(const void *buffer, uint32_t size)
+{
+
+	if (size > sizeof(txbuffer)) size = sizeof(txbuffer);
+	memcpy(txbuffer, buffer, size);
+	usb_prepare_transfer(&transfer, txbuffer, size, 0);
+	usb_transmit(CDC_TX_ENDPOINT, &transfer);
+
+#if 0
+	uint32_t ret = size;
+	uint32_t len;
+	uint32_t wait_count;
+	const uint8_t *src = (const uint8_t *)buffer;
+	uint8_t *dest;
+
+	tx_noautoflush = 1;
+	while (size > 0) {
+		if (!tx_packet) {
+			wait_count = 0;
+			while (1) {
+				if (!usb_configuration) {
+					tx_noautoflush = 0;
+					return -1;
+				}
+				if (usb_tx_packet_count(CDC_TX_ENDPOINT) < TX_PACKET_LIMIT) {
+					tx_noautoflush = 1;
+					tx_packet = usb_malloc();
+					if (tx_packet) break;
+					tx_noautoflush = 0;
+				}
+				if (++wait_count > TX_TIMEOUT || transmit_previous_timeout) {
+					transmit_previous_timeout = 1;
+					return -1;
+				}
+				yield();
+			}
+		}
+		transmit_previous_timeout = 0;
+		len = CDC_TX_SIZE - tx_packet->index;
+		if (len > size) len = size;
+		dest = tx_packet->buf + tx_packet->index;
+		tx_packet->index += len;
+		size -= len;
+		while (len-- > 0) *dest++ = *src++;
+		if (tx_packet->index >= CDC_TX_SIZE) {
+			tx_packet->len = CDC_TX_SIZE;
+			usb_tx(CDC_TX_ENDPOINT, tx_packet);
+			tx_packet = NULL;
+		}
+		usb_cdc_transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT;
+	}
+	tx_noautoflush = 0;
+	return ret;
+#endif
+	return 0;
+}
+
+int usb_serial_write_buffer_free(void)
+{
+#if 0
+	uint32_t len;
+
+	tx_noautoflush = 1;
+	if (!tx_packet) {
+		if (!usb_configuration ||
+		  usb_tx_packet_count(CDC_TX_ENDPOINT) >= TX_PACKET_LIMIT ||
+		  (tx_packet = usb_malloc()) == NULL) {
+			tx_noautoflush = 0;
+			return 0;
+		}
+	}
+	len = CDC_TX_SIZE - tx_packet->index;
+	// TODO: Perhaps we need "usb_cdc_transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT"
+	// added here, so the SOF interrupt can't take away the available buffer
+	// space we just promised the user could write without blocking?
+	// But does this come with other performance downsides?  Could it lead to
+	// buffer data never actually transmitting in some usage cases?  More
+	// investigation is needed.
+	// https://github.com/PaulStoffregen/cores/issues/10#issuecomment-61514955
+	tx_noautoflush = 0;
+	return len;
+#endif
+	return 0;
+}
+
+void usb_serial_flush_output(void)
+{
+#if 0
+	if (!usb_configuration) return;
+	tx_noautoflush = 1;
+	if (tx_packet) {
+		usb_cdc_transmit_flush_timer = 0;
+		tx_packet->len = tx_packet->index;
+		usb_tx(CDC_TX_ENDPOINT, tx_packet);
+		tx_packet = NULL;
+	} else {
+		usb_packet_t *tx = usb_malloc();
+		if (tx) {
+			usb_cdc_transmit_flush_timer = 0;
+			usb_tx(CDC_TX_ENDPOINT, tx);
+		} else {
+			usb_cdc_transmit_flush_timer = 1;
+		}
+	}
+	tx_noautoflush = 0;
+#endif
+}
+
+void usb_serial_flush_callback(void)
+{
+#if 0
+	if (tx_noautoflush) return;
+	if (tx_packet) {
+		tx_packet->len = tx_packet->index;
+		usb_tx(CDC_TX_ENDPOINT, tx_packet);
+		tx_packet = NULL;
+	} else {
+		usb_packet_t *tx = usb_malloc();
+		if (tx) {
+			usb_tx(CDC_TX_ENDPOINT, tx);
+		} else {
+			usb_cdc_transmit_flush_timer = 1;
+		}
+	}
+#endif
+}
+
+
+
+//#endif // F_CPU
+#endif // CDC_STATUS_INTERFACE && CDC_DATA_INTERFACE

teensy4/usb_serial.h

@@ -0,0 +1,127 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#pragma once
+
+#include "usb_desc.h"
+
+#if (defined(CDC_STATUS_INTERFACE) && defined(CDC_DATA_INTERFACE)) || defined(USB_DISABLED)
+
+#include <stdint.h>
+
+// C language implementation
+#ifdef __cplusplus
+extern "C" {
+#endif
+int usb_serial_getchar(void);
+int usb_serial_peekchar(void);
+int usb_serial_available(void);
+int usb_serial_read(void *buffer, uint32_t size);
+void usb_serial_flush_input(void);
+int usb_serial_putchar(uint8_t c);
+int usb_serial_write(const void *buffer, uint32_t size);
+int usb_serial_write_buffer_free(void);
+void usb_serial_flush_output(void);
+extern uint32_t usb_cdc_line_coding[2];
+extern volatile uint32_t usb_cdc_line_rtsdtr_millis;
+extern volatile uint32_t systick_millis_count;
+extern volatile uint8_t usb_cdc_line_rtsdtr;
+extern volatile uint8_t usb_cdc_transmit_flush_timer;
+extern volatile uint8_t usb_configuration;
+#ifdef __cplusplus
+}
+#endif
+
+#define USB_SERIAL_DTR  0x01
+#define USB_SERIAL_RTS  0x02
+
+// C++ interface
+#ifdef __cplusplus
+#include "Stream.h"
+class usb_serial_class : public Stream
+{
+public:
+	constexpr usb_serial_class() {}
+        void begin(long) {
+		//uint32_t millis_begin = systick_millis_count;
+		//disabled for now - causes more trouble than it solves?
+		//while (!(*this)) {
+			// wait up to 2.5 seconds for Arduino Serial Monitor
+			// Yes, this is a long time, but some Windows systems open
+			// the port very slowly.  This wait allows programs for
+			// Arduino Uno to "just work" (without forcing a reboot when
+			// the port is opened), and when no PC is connected the user's
+			// sketch still gets to run normally after this wait time.
+			//if ((uint32_t)(systick_millis_count - millis_begin) > 2500) break;
+		//}
+	}
+        void end() { /* TODO: flush output and shut down USB port */ };
+        virtual int available() { return usb_serial_available(); }
+        virtual int read() { return usb_serial_getchar(); }
+        virtual int peek() { return usb_serial_peekchar(); }
+        virtual void flush() { usb_serial_flush_output(); }  // TODO: actually wait for data to leave USB...
+        virtual void clear(void) { usb_serial_flush_input(); }
+        virtual size_t write(uint8_t c) { return usb_serial_putchar(c); }
+        virtual size_t write(const uint8_t *buffer, size_t size) { return usb_serial_write(buffer, size); }
+	size_t write(unsigned long n) { return write((uint8_t)n); }
+	size_t write(long n) { return write((uint8_t)n); }
+	size_t write(unsigned int n) { return write((uint8_t)n); }
+	size_t write(int n) { return write((uint8_t)n); }
+	virtual int availableForWrite() { return usb_serial_write_buffer_free(); }
+	using Print::write;
+        void send_now(void) { usb_serial_flush_output(); }
+        uint32_t baud(void) { return usb_cdc_line_coding[0]; }
+        uint8_t stopbits(void) { uint8_t b = usb_cdc_line_coding[1]; if (!b) b = 1; return b; }
+        uint8_t paritytype(void) { return usb_cdc_line_coding[1] >> 8; } // 0=none, 1=odd, 2=even
+        uint8_t numbits(void) { return usb_cdc_line_coding[1] >> 16; }
+        uint8_t dtr(void) { return (usb_cdc_line_rtsdtr & USB_SERIAL_DTR) ? 1 : 0; }
+        uint8_t rts(void) { return (usb_cdc_line_rtsdtr & USB_SERIAL_RTS) ? 1 : 0; }
+        operator bool() { return usb_configuration && (usb_cdc_line_rtsdtr & USB_SERIAL_DTR) &&
+		((uint32_t)(systick_millis_count - usb_cdc_line_rtsdtr_millis) >= 15);
+	}
+	size_t readBytes(char *buffer, size_t length) {
+		size_t count=0;
+		unsigned long startMillis = millis();
+		do {
+			count += usb_serial_read(buffer + count, length - count);
+			if (count >= length) return count;
+		} while(millis() - startMillis < _timeout);
+		setReadError();
+		return count;
+	}
+
+};
+extern usb_serial_class Serial;
+extern void serialEvent(void);
+#endif // __cplusplus
+
+
+#endif // CDC_STATUS_INTERFACE && CDC_DATA_INTERFACE
+

teensy4/wiring.h

@@ -0,0 +1,197 @@
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2017 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef Wiring_h
+#define Wiring_h
+
+#include <stdint.h>
+#include <stdlib.h>
+#include "binary.h"
+#include "core_id.h"
+#include "core_pins.h"
+
+// type_traits interferes with min() and other defines
+// include it early, so we can define these later
+// for Arduino compatibility
+#ifdef __cplusplus
+#include <type_traits>
+// when the input number is an integer type, do all math as 32 bit signed long
+template <class T, class A, class B, class C, class D>
+long map(T _x, A _in_min, B _in_max, C _out_min, D _out_max, typename std::enable_if<std::is_integral<T>::value >::type* = 0)
+{
+	long x = _x, in_min = _in_min, in_max = _in_max, out_min = _out_min, out_max = _out_max;
+	// Arduino's traditional algorithm
+	//return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+	// st42's suggestion: https://github.com/arduino/Arduino/issues/2466#issuecomment-69873889
+	// more conversation:
+	// https://forum.pjrc.com/threads/44503-map()-function-improvements
+	if ((in_max - in_min) > (out_max - out_min)) {
+		return (x - in_min) * (out_max - out_min+1) / (in_max - in_min+1) + out_min;
+	} else {
+		return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+	}
+}
+// when the input is a float or double, do all math using the input's type
+template <class T, class A, class B, class C, class D>
+T map(T x, A in_min, B in_max, C out_min, D out_max, typename std::enable_if<std::is_floating_point<T>::value >::type* = 0)
+{
+	return (x - (T)in_min) * ((T)out_max - (T)out_min) / ((T)in_max - (T)in_min) + (T)out_min;
+}
+//#include <algorithm> // this isn't really needed, is it?  (slows down compiling)
+#include <utility>
+// https://forum.pjrc.com/threads/44596-Teensyduino-1-37-Beta-2-(Arduino-1-8-3-support)?p=145150&viewfull=1#post145150
+template<class A, class B>
+constexpr auto min(A&& a, B&& b) -> decltype(a < b ? std::forward<A>(a) : std::forward<B>(b)) {
+  return a < b ? std::forward<A>(a) : std::forward<B>(b);
+}
+template<class A, class B>
+constexpr auto max(A&& a, B&& b) -> decltype(a < b ? std::forward<A>(a) : std::forward<B>(b)) {
+  return a >= b ? std::forward<A>(a) : std::forward<B>(b);
+}
+#else // not C++
+#define min(a, b) ({ \
+  typeof(a) _a = (a); \
+  typeof(b) _b = (b); \
+  (_a < _b) ? _a : _b; \
+})
+#define max(a, b) ({ \
+  typeof(a) _a = (a); \
+  typeof(b) _b = (b); \
+  (_a > _b) ? _a : _b; \
+})
+#endif
+
+
+#ifdef PI
+#undef PI
+#endif
+#define PI 3.1415926535897932384626433832795
+#define HALF_PI 1.5707963267948966192313216916398
+#define TWO_PI 6.283185307179586476925286766559
+#define DEG_TO_RAD 0.017453292519943295769236907684886
+#define RAD_TO_DEG 57.295779513082320876798154814105
+
+#ifndef M_PI
+#define M_PI 3.1415926535897932384626433832795
+#endif
+#ifndef M_SQRT2
+#define M_SQRT2 1.4142135623730950488016887
+#endif
+
+#define SERIAL  0
+#define DISPLAY 1
+
+// undefine stdlib's abs if encountered
+#ifdef abs
+#undef abs
+#endif
+
+#if __cplusplus >= 201103L && defined(__STRICT_ANSI__)
+#define typeof(a) decltype(a)
+#endif
+
+#define abs(x) ({ \
+  typeof(x) _x = (x); \
+  (_x > 0) ? _x : -_x; \
+})
+#define constrain(amt, low, high) ({ \
+  typeof(amt) _amt = (amt); \
+  typeof(low) _low = (low); \
+  typeof(high) _high = (high); \
+  (_amt < _low) ? _low : ((_amt > _high) ? _high : _amt); \
+})
+#define round(x) ({ \
+  typeof(x) _x = (x); \
+  (_x>=0) ? (long)(_x+0.5) : (long)(_x-0.5); \
+})
+#define radians(deg) ((deg)*DEG_TO_RAD)
+#define degrees(rad) ((rad)*RAD_TO_DEG)
+#define sq(x) ({ \
+  typeof(x) _x = (x); \
+  _x * _x; \
+})
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+
+extern double exp10(double x);
+extern float exp10f(float x);
+extern long double exp10l(long double x);
+extern double pow10(double x);
+extern float pow10f(float x);
+extern long double pow10l(long double x);
+
+#define stricmp(a, b) strcasecmp(a, b)
+
+#define sei() __enable_irq()
+#define cli() __disable_irq()
+#define interrupts() __enable_irq()
+#define noInterrupts() __disable_irq()
+
+#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
+#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
+#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
+
+#define lowByte(w) ((uint8_t)((w) & 0xFF))
+#define highByte(w) ((uint8_t)((w) >> 8))
+
+#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
+#define bitSet(value, bit) ((value) |= (1UL << (bit)))
+#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
+#define bitWrite(value, bit, bitvalue) ((bitvalue) ? bitSet((value), (bit)) : bitClear((value), (bit)))
+
+typedef unsigned int word;
+
+#define bit(b) (1UL << (b))
+
+typedef uint8_t byte;
+
+uint32_t pulseIn(uint8_t pin, uint8_t state, uint32_t timeout);
+void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val);
+
+void setup(void);
+void loop(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+// fix C++ boolean issue
+// https://github.com/arduino/Arduino/pull/2151
+#ifdef __cplusplus
+typedef bool boolean;
+#else
+typedef uint8_t boolean;
+#define false 0
+#define true (!false)
+#endif
+
+#endif