PaulStoffregen
50c805926f
Improve flash security documentation
преди 8 години
Paul Stoffregen
2a7c289045
Merge pull request #154 from duff2013/master
trigger mode enable cmp register def
преди 8 години
duff2013
c5c14007bb
trigger mode enable cmp register def
преди 8 години
PaulStoffregen
88dce04d81
Add extra K66 pin defines
преди 8 години
Paul Stoffregen
42b873097e
Merge pull request #153 from KurtE/Serial2-SetTx/Rx-error
Serial2.setTx and Serial2.setRX should check Uart1
преди 8 години
Kurt Eckhardt
1bb20b3b61
Serial2.setTx and Serial2.setRX should check Uart1
These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2)
and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)
преди 8 години
PaulStoffregen
bb95e546fe
Increase startup delay slightly
преди 8 години
PaulStoffregen
aeff63583d
Document flash security locking technique
преди 8 години
PaulStoffregen
39d9fdc386
Fix compiler warnings with USB audio
преди 8 години
Paul Stoffregen
77411348a4
Merge pull request #152 from FrankBoesing/patch-1
fix SDHC_XFERTYP_RSPTYP
преди 8 години
Frank
61dce339b0
fix SDHC_XFERTYP_RSPTYP
преди 8 години
PaulStoffregen
de0677a6e0
Enable VREF on K66
fixes #145
преди 8 години
Paul Stoffregen
6002a8710c
Merge pull request #146 from KurtE/SPI1-defined
Spi1 defined
преди 8 години
Paul Stoffregen
3ab443fd1a
Merge pull request #151 from KurtE/PulseIn-LC
PulseIn on LC issue
преди 8 години
Kurt Eckhardt
eb97df1ffe
PulseIn on LC issue
PulseIn may fail on LC as it is using *reg to test the value for on or
off, but on LC register is a bitmask associated with several IO pins.
So split off for LC to use the MASK value for the pin to test high and
low.
Warning did not update timings for this, which may be necessary as adds
an & in the loop. However when I tried TLC for 5000us timeout, it timed
out with 5138us, if I decremented the PULSEIN_LOOPS_PER_USEC by one,
then it timed out at 4398... This was at 49mhz.
преди 8 години
PaulStoffregen
4b7151d0e0
Fix compiler warning with Keyboard.set_modifier
преди 8 години
Kurt Eckhardt
57be6914a5
Serial1 - New pins work with begin
преди 8 години
Kurt Eckhardt
94ce960eef
SPCR1 operations now defined
преди 8 години
PaulStoffregen
31c9626281
Fix some USBHS register bit names
преди 8 години
Paul Stoffregen
2d37d6e087
Merge pull request #148 from duff2013/master
Set FlexBus Clock Divider to correct value for 16, 8, 4 MHz
преди 8 години
duff2013
87274341bd
Set FlexBus Clock Divider to correct value for 16, 8, 4 MHz
преди 8 години
Paul Stoffregen
d07a9215a4
Merge pull request #147 from duff2013/master
update LLWU reg.
преди 8 години
duff2013
484098c794
update LLWU reg.
преди 8 години
PaulStoffregen
9f1f15a53e
Add SDHC register bit defs
преди 8 години
PaulStoffregen
0e35a31068
Add ethernet register bit defs
преди 8 години
PaulStoffregen
8d7b44f384
Merge branch 'master' of github.com:PaulStoffregen/cores
преди 8 години
PaulStoffregen
fdf57f66c6
Add USBHS register bit defs
преди 8 години
Kurt Eckhardt
1c2f6dca35
Optional: Add SPI2...
Just in case the extra pads are added to bottom of 3.4/3.5 board,
define is in place...
преди 8 години
Kurt Eckhardt
305fb4da93
SPI1 on T3.4/3.5 - Add SPCR1
преди 8 години
Kurt Eckhardt
91f8f30c04
Add SPI1 to kinetis.h for T3.4 and T3.5
Added define for SPI1 registers
преди 8 години
Paul Stoffregen
3ab6f0380f
Merge pull request #144 from FrankBoesing/patch-1
add additonal F_TIMER (FTM_MOD)
преди 8 години
Frank
c0921e7b0d
add additonal F_TIMER (FTM_MOD)
...were missing :)
преди 8 години
PaulStoffregen
d79723c252
Easier F_BUS overclocking
преди 8 години
PaulStoffregen
be42e0574e
Fix DMA on K66
преди 8 години
Paul Stoffregen
ebc6460ff4
Merge pull request #142 from FrankBoesing/master
Add missing F_BUS
преди 8 години
Frank Bösing
dfd60bee72
add missing F_BUS to SPIFIFO
преди 8 години
Frank Bösing
8752969dbb
Add missing F_BUS
преди 8 години
PaulStoffregen
e2e07e5394
Fix DMAMUX for K66
преди 8 години
PaulStoffregen
ddb7fb0267
Add I2C clock divider names
преди 8 години
PaulStoffregen
575f309209
Fix EEPROM on K66
преди 8 години
PaulStoffregen
759ba1b417
Fix touchRead on K66
преди 8 години
PaulStoffregen
7a2c0037b8
Use IRC48M clock for USB when F_CPU is 180 or 216 MHz
преди 8 години
PaulStoffregen
6856d4eedc
Fix analogRead on K66
преди 8 години
PaulStoffregen
7c963d5269
Use SIM_SCGC6 for RNG to match register defs
преди 8 години
PaulStoffregen
5eab8dd0b8
Fix pin numbers for transmit opendrain on Serial4 & Serial5
преди 8 години
Paul Stoffregen
9f87a7b766
Merge pull request #139 from KurtE/T3-5-Serial1-new-TXRX-pins
Add support for pins 26 and 27
преди 8 години
Paul Stoffregen
cd8cd50f05
Merge pull request #140 from FrankBoesing/patch-1
Fix for crash @ 48 & 24MHz on K66
преди 8 години
Kurt Eckhardt
7458590a29
Allow SetTX on Serial3/4/5 ...
On Serial 3 this addition is for all 3.x. Before it was ifdefed to only
do work on Teensy_LC as there is only one valid TX pin. But we now pass
in open drain as an option so this code should allow you to not turn it
on/off on Serial3 on all of these boards
and on Serial4 and Serial5 on the new boards.
преди 8 години
Frank
27f9bd8f0f
Frix for crash @ 48 & 24MHz
преди 8 години
Kurt Eckhardt
c9bec4c380
Serial2 - !TX(31) !RX(26) on T3.5
Updated Serial2.
It had valid TX for T3.2 of 10 and 31, but 31 on T3.5 is RX4
Likewise RX for T3.2 of 9 and 26, but on T3.5 26 is RX1
преди 8 години