teensy-core-4.1

提交图

作者	SHA1	备注	提交日期
Kurt Eckhardt	2954ed6425	T3.x(LC) - yield and eventResponder speedups if not used Code is setup that if there are no eventResponders that have registered to do interrupt calls, don't have the systic code in place to look for it. Also yield code. Now figures out if the user has any code that installs their own serialEventX methods, to call them, but if they have left the default weak pointer versions, to not call them in yield. Likewise will only look for eventRespnder events if the sketch has actually attached any events. If none of these conditions are true, yield will just check one flag and return. T3.x Serial events cleanup	4 年前
PaulStoffregen	717916e64d	Fix SERIAL_8N2 mode on Teensy LC	7 年前
PaulStoffregen	07906c1091	Teensy LC doesn't support 9 bits on Serial2 & Serial3	7 年前
PaulStoffregen	70e7c62a7d	Add comment to HardwareSerial.h for editing SERIAL_9BIT_SUPPORT	7 年前
PaulStoffregen	7099935c0e	Update open source license info	7 年前
PaulStoffregen	768926244c	Use constexpr constructors for all Serial classes	7 年前
PaulStoffregen	d30f8ccab8	Add using Print::write to hardware serial	7 年前
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	8 年前
Kurt Eckhardt	7352ea7791	Add Serial6 - T3.4 Uart5, T3.5 LPUart0 This is a WIP, But I have now been able to create Serial6 on T3.4 beta, and so far have tested Send/Receive basic stuff at 115200 and have tried at several CPU speeds in MHZ (192, 216, 180, 120, 96)	8 年前
PaulStoffregen	8b3d33689e	Add Serial4 & Serial5 for K64 & K66	8 年前
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	8 年前
PaulStoffregen	8dbe007acc	Fix incorrect baud rate on Serial2 when used with format option	8 年前
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	8 年前
PaulStoffregen	2c726eae11	RTS/CTS support for Serial1 on Teensy LC & 3.x (experimental)	9 年前
PaulStoffregen	7a6898b59d	Add bool operator to HardwareSerial	9 年前
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	9 年前
duff2013	06f4defa2d	(MKL26Z64) update for F_PLL <= 16MHz	10 年前
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	10 年前
PaulStoffregen	19ee965759	Add transmitterEnable on Serial2 & Serial3	10 年前
PaulStoffregen	3b9ae1513b	rename writeBufferFree() to availableForWrite()	10 年前
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	10 年前
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	10 年前
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	10 年前
PaulStoffregen	4c047eea2b	Add serialEvent (USB) and serialEvent1-3 (serial)	10 年前
PaulStoffregen	d783be33c1	Clean up trailing whitespace	10 年前
PaulStoffregen	98737f890f	HardwareSerial write functions need to be virtual http://forum.pjrc.com/threads/25494-Problems-with-HardwareSerial-Pointer-and-write	10 年前
PaulStoffregen	bff3488fd1	Add Serial1.transmitterEnable(pin) for RS-485	11 年前
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	11 年前
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	11 年前

29 次代码提交 (90e1ea9798f5fc20c4878a927a16b50b50aa2169)