37 次程式碼提交 (b9066ead1fb400b50c442210ebad350dd8b0f4a8)

作者 SHA1 備註 提交日期
  PaulStoffregen c425ecbd0a Fix serial end() when errors are received but final interrupt never runs 6 年之前
  PaulStoffregen d51854082b Fix serail stall when too-fast baud rates attempted 7 年之前
  PaulStoffregen 07906c1091 Teensy LC doesn't support 9 bits on Serial2 & Serial3 7 年之前
  PaulStoffregen 7099935c0e Update open source license info 7 年之前
  PaulStoffregen e8748e9b3c Fix 9 bit mode on Serial1 & Serial2 on Teensy LC 7 年之前
  PaulStoffregen be40459682 Don't allow pre-init of Serial2 Teensy 3.2 pins on Teensy3.6 8 年之前
  Frank Bösing cecfe51276 Set RTS Watermarks dependend of rx-buffersize 8 年之前
  Frank Bösing 6dd6073c2c serialX buffersizes 8 年之前
  PaulStoffregen f496103194 Always define the SD card pins - do it like we mean it! 8 年之前
  Kurt Eckhardt eef956bb2d Update Board Names 8 年之前
  Kurt Eckhardt db1e687b18 T3.5/T3.6 Beta: Optional Allow SDCard pins 8 年之前
  Kurt Eckhardt 899cbecc02 Enable Uart 2 stop bit capabilities 8 年之前
  Kurt Eckhardt a8c467f5e6 Fix Compile error for Teensy LC 8 年之前
  Kurt Eckhardt 1067caf0ba Beta Board names Change 8 年之前
  Kurt Eckhardt da4b27c0db T3.2 Serial2.end - handle alternate pins 8 年之前
  Kurt Eckhardt 1bb20b3b61 Serial2.setTx and Serial2.setRX should check Uart1 8 年之前
  Kurt Eckhardt c9bec4c380 Serial2 - !TX(31) !RX(26) on T3.5 8 年之前
  PaulStoffregen 1e5260347f Add opendrain option to Serial#.setTX 8 年之前
  PaulStoffregen e3989b19f3 Add HardwareSerial setRX(pin) & setTX(pin) 8 年之前
  PaulStoffregen 0254d93d95 Teensy-LC doesn't support CTS, so disable its code 8 年之前
  PaulStoffregen 6e0dd8ab39 Use software-based RTS on Serial2 and Serial3 8 年之前
  PaulStoffregen c6e6060c48 whitespace reformat in serial code 9 年之前
  PaulStoffregen c2f550d378 Add serial flow control C functions 9 年之前
  PaulStoffregen 6ed0c5f01f Fix Hardware Serial transmitterEnable() on Teensy-LC 9 年之前
  PaulStoffregen e2bf6d44e0 Avoid kinetis.h name conflicts with simple Arduino names 9 年之前
  PaulStoffregen 182037caea Fix 9 bit hardware serial receive 9 年之前
  PaulStoffregen 9b8d74c089 Initial support for Teensy-LC 9 年之前
  PaulStoffregen 19ee965759 Add transmitterEnable on Serial2 & Serial3 10 年之前
  PaulStoffregen 36fc4f599e Use Serial2's FIFO on Teensy 3.1 10 年之前
  PaulStoffregen 9c1e41e70e Change room() to writeBufferFree() 10 年之前
  PaulStoffregen 479bde6866 Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h 10 年之前
  PaulStoffregen 603afcc984 Fix off-by-1 error in new Serial#.room() 10 年之前
  PaulStoffregen d289954223 Add Serial1-3.room() 10 年之前
  PaulStoffregen 7ba1cbccc6 Add NVIC priority handling in Serial2 & Serial3 11 年之前
  PaulStoffregen 29168b784d Add serial formats and 9 bit modes (disabled by default) to HardwareSerial 11 年之前
  PaulStoffregen 5cecdee933 Initial commit, version 1.17-rc1 11 年之前