teensy-core-4.1

作成者	SHA1	メッセージ	日付
PaulStoffregen	e0dd146824	More defs	9年前
PaulStoffregen	d54debdb91	Add more register defs & PLL config	9年前
PaulStoffregen	248de33822	Only use memset.S with -Os, C lib is faster with -O	9年前
PaulStoffregen	96c8a911f3	All compiling with -std=c++0x on Teensy 3.x	9年前
PaulStoffregen	af8ebb03f0	optimized memset fixes #109	9年前
PaulStoffregen	70a24272aa	Fix DMA_TCD_NBYTES_MLOFFNO_NBYTES	9年前
PaulStoffregen	e2a0a745e6	Fix NUM_ENDPOINTS on RawHID, fixes #108	9年前
duff2013	abc81a9670	Add SCB_SCR register definitions	9年前
PaulStoffregen	0254d93d95	Teensy-LC doesn't support CTS, so disable its code	9年前
PaulStoffregen	1c1235ed23	dummy pin change defs (for WIFI101 library)	9年前
PaulStoffregen	6e0dd8ab39	Use software-based RTS on Serial2 and Serial3	9年前
PaulStoffregen	cf01df2494	Add SerialUSB definition	9年前
PaulStoffregen	1225f43fd0	Report Serial bool operator true only after 25 ms Sometimes the PC or Mac drivers are not actually ready to begin receiving data immediately after they cause DTR or RTS to assert. This delay allows the PC to become ready before we tell sketches the Serial device is true (ready).	9年前
PaulStoffregen	59a7b221fa	Fix delay when yield longer than 1ms	9年前
Pieter du Preez	0d26e6a30e	Made the teensy3/Makefile completely Arduino independent. Those that specify a NO_ARDUINO environment variable before using the teensy3/Makefile, will be completely Arduino independent. Note however that if ARDUINOPATH is set, the NO_ARDUINO behaviour will be overridden. With NO_ARDUINO set and ARDUINOPATH unset, the cross-compiler tool path (COMPILERPATH) will be set to /usr/bin. Setting the COMPILERPATH environment variable before using the teensy3/Makefile, will override the default.	9年前
Pieter du Preez	060b1a7d1d	Normalize the use of abspath in the teensy3/Makefile. Some path-variables in the teens3/Makefile passes though abspath every time before they get used. Do this only once, when they get set. This makes things more readable and less error-prone.	9年前
Joe Hermaszewski	1d45148b6b	Fix compile error with clang casting long* to int*	9年前
Joe Hermaszewski	cd59946847	Do not put ResetHandler in .startup with clang Clang seems to generate slightly larger code with Os than gcc, and ResetHandler doesn't fit into the .startup section.	9年前
lxphilli	d18f73d1b3	Implement 16-Byte Burst Transfer Size	9年前
David Fries	a8c06f2d4c	Makefile, set MCU at top and remove -nostdlib Define MCU in one place at the top of the file. Also allow it to be overridden by the command line to compile for a different MCU without changing the Makefile. Reduce confusion, remove -nostdlib as it isn't obvious that it is only being passed when compiling (which isn't linking so doesn't use it), and isn't being passed to the linker (where it would fail if it was, because routines from the library are used).	9年前
PaulStoffregen	c006772eeb	Add startup delay - improves Windows & I2C sensor experience	9年前
PaulStoffregen	2c726eae11	RTS/CTS support for Serial1 on Teensy LC & 3.x (experimental)	9年前
Frank	9074be84f0	The buffer for digits after the decimal-point is on the stack, so i think it's not a problem to make it slightly bigger. https://forum.pjrc.com/threads/31233-float-and-double?p=86860&viewfull=1#post86860	9年前
Frank	45468b4ba4	use float version of fcvt	9年前
PaulStoffregen	7a6898b59d	Add bool operator to HardwareSerial	9年前
Defragster	9d0e0143bd	Fix for dtostrf on floats under zero Per forum https://forum.pjrc.com/threads/1227-Teensy3-alternative-for-dtostrf()?p=86671&viewfull=1#post86671	9年前
PaulStoffregen	b9044c4289	Add doughboy's alternate serial1 code (for reference only, not used yet)	9年前
PaulStoffregen	c6e6060c48	whitespace reformat in serial code	9年前
PaulStoffregen	7e46ee291b	Add 2 channel enable flags for I2S	9年前
Thierry Frenkel	0e397cc970	Allow low frequencies for analogWriteFrequency In case the desired frequency is too low to be obtained with F_TIMER because prescale and mod were at their limits, switch automatically to the alternative clock source (31250Hz) before determining prescale and mod with the same algorithm as before.	9年前
PaulStoffregen	c4289ff4c5	Improve tone(), always complete current cycle before change to new frequency	9年前
PaulStoffregen	d1a6e77ad9	Begin work on MTP Disk	9年前
PaulStoffregen	d5a1b9745b	Add __bss_start__ and __bss_end__, improves compatibility with other software	9年前
PaulStoffregen	aa212b61e0	Defs for MK66FX1M0	9年前
Frank	628addbd49	See Reference Manual Page 1350 50.6.2 SCAN Control register Bug found by Chronologist, https://forum.pjrc.com/threads/29624-Using-TSI-for-capacitance-measurement	9年前
PaulStoffregen	345b03b31f	Someday Teensy-LC will have audio, but only 22 kHz sample rate	9年前
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	9年前
PaulStoffregen	7dd78d023a	Reduce flash clock in 168 MHz overclock mode	9年前
PaulStoffregen	f2948bd195	Add UART register bit definitions	9年前
PaulStoffregen	05fa587cc4	Add more register defs	9年前
PaulStoffregen	1e49af2dd2	Add register definitions	9年前
Jorg Bliesener	fe29d9e740	Bugfixes and comments	9年前
Jorg Bliesener	32d841e418	usb_flightsim changes for XPlaneRefs with names >58 chars	9年前
Karg	09f8b04899	Added full support for Midi Time Codes and Real Time messages can now receive and send Midi Time Codes and send Real Time messages	9年前
Laurentiu Nicola	4096258944	Remove functions already defined in the standard library Since newlib 2.2.0 itoa() and utoa() are declared in stdlib.h and redefining them makes the compiler unhappy	10年前
PaulStoffregen	4cf71a44c8	Use mlu's further optimization of divmod10 https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1?p=76072&viewfull=1#post76072	9年前
PaulStoffregen	71ba6b2adb	Speedup print() on Teensy-LC	9年前
Jorg Neves Bliesener	f2ed8c5dc3	Fix packet stuffing in usb_flightsim_flush_callback	9年前
PaulStoffregen	37e24b0107	define SERIAL_PORT_MONITOR to Serial1 when USB is disabled	9年前
PaulStoffregen	0bdac50dcb	Add PDB channel 1 register definitions https://forum.pjrc.com/threads/25153-PDB0CH1-register-definitions	9年前

261 コミット (e0dd1468245ecbf8489bda40f109939e2910398a)