teensy-core-4.1

Commit graph

Autor	SHA1	Nachricht	Datum
Kurt Eckhardt	abe9784408	T4 serialEventN - Pass 1 before EventResponder Add some support for serialEventX calls when yield is called. Currently keep table of which SerialX objects are Used (.begin called) and each has their own function which does the if (Serial1.available()) serialEvent1(); Calling SerialX.end(), removes the call from the list. Also the default weak pointer serialEventX functions call the disable function, as to only be called once as no one is actually processing them... At some point will integrate this with EventResponder	vor 6 Jahren
Kurt Eckhardt	4a8bf778e0	T4 SerialX - SerialX.end() and define Event callbacks Put in first pass at SerialX.end(), Which should disable the Serial object, and I believe set the IO pins to be GPIO pins. Also defined the extern void SerialEvent1() like functions in header in preperation for callbacks...	vor 6 Jahren
Kurt Eckhardt	bf38c3489d	T4 SerialX More support including formats More support put in. Now support for different formats of output. So far I have tried 8N1, 8N2, 7E1, 7O1...	vor 6 Jahren
Kurt Eckhardt	3f700149ea	T4-SerialX fleshing out code Fleshing out some of the missing pieces. - Need to test copy NVIC execution priority from T3 Set priority per Serial object RTS pin CTS pin - only Serial3 supports setRX, setTX - do nothing none of these have two pins defined. Maybe temporary - but added from previous code ability to add second buffer for RX and TX	vor 6 Jahren
Kurt Eckhardt	2209a9f01b	T4 - SerialX Support for Transmitter Enable Used macros from OneWIre to fast set/clear the optional Transmitter Enable support. Also fixed bug in ISR where was not properly looking for TC. This will help make SerialX->flush() to work	vor 6 Jahren
Kurt Eckhardt	361d842551	T4 - Hardware Serial - Pass 1 This pass has some more support for using the Hardware Serial objects. Including setting an ISR for doing both reads and writes, sets up the FIFO, Sitll lots more work to go. Things like: fifo - need to better understand/set watermarks, also RX need to read in more than one byte if more available. Also support fo r other features, like formats, 9 bit, ... BUt at least you can do simple reads/writes	vor 6 Jahren
PaulStoffregen	37c8161601	Transmit only polling HardwareSerial on imxrt	vor 6 Jahren
PaulStoffregen	e687673ddf	First commit, Teensy4 work-in-progress	vor 6 Jahren
PaulStoffregen	717916e64d	Fix SERIAL_8N2 mode on Teensy LC	vor 7 Jahren
PaulStoffregen	07906c1091	Teensy LC doesn't support 9 bits on Serial2 & Serial3	vor 7 Jahren
PaulStoffregen	70e7c62a7d	Add comment to HardwareSerial.h for editing SERIAL_9BIT_SUPPORT	vor 7 Jahren
PaulStoffregen	7099935c0e	Update open source license info	vor 7 Jahren
PaulStoffregen	768926244c	Use constexpr constructors for all Serial classes	vor 7 Jahren
PaulStoffregen	d30f8ccab8	Add using Print::write to hardware serial	vor 7 Jahren
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	vor 8 Jahren
Kurt Eckhardt	7352ea7791	Add Serial6 - T3.4 Uart5, T3.5 LPUart0 This is a WIP, But I have now been able to create Serial6 on T3.4 beta, and so far have tested Send/Receive basic stuff at 115200 and have tried at several CPU speeds in MHZ (192, 216, 180, 120, 96)	vor 8 Jahren
PaulStoffregen	8b3d33689e	Add Serial4 & Serial5 for K64 & K66	vor 8 Jahren
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	vor 8 Jahren
PaulStoffregen	8dbe007acc	Fix incorrect baud rate on Serial2 when used with format option	vor 8 Jahren
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	vor 8 Jahren
PaulStoffregen	2c726eae11	RTS/CTS support for Serial1 on Teensy LC & 3.x (experimental)	vor 9 Jahren
PaulStoffregen	7a6898b59d	Add bool operator to HardwareSerial	vor 9 Jahren
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	vor 9 Jahren
duff2013	06f4defa2d	(MKL26Z64) update for F_PLL <= 16MHz	vor 10 Jahren
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	vor 10 Jahren
PaulStoffregen	19ee965759	Add transmitterEnable on Serial2 & Serial3	vor 10 Jahren
PaulStoffregen	3b9ae1513b	rename writeBufferFree() to availableForWrite()	vor 10 Jahren
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	vor 10 Jahren
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	vor 10 Jahren
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	vor 10 Jahren
PaulStoffregen	4c047eea2b	Add serialEvent (USB) and serialEvent1-3 (serial)	vor 10 Jahren
PaulStoffregen	d783be33c1	Clean up trailing whitespace	vor 10 Jahren
PaulStoffregen	98737f890f	HardwareSerial write functions need to be virtual http://forum.pjrc.com/threads/25494-Problems-with-HardwareSerial-Pointer-and-write	vor 10 Jahren
PaulStoffregen	bff3488fd1	Add Serial1.transmitterEnable(pin) for RS-485	vor 11 Jahren
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	vor 11 Jahren
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	vor 11 Jahren

8 Commits (e4b8e1eee8da76445c21bba35d715e8c4bc16b68)