PaulStoffregen
2c726eae11
RTS/CTS support for Serial1 on Teensy LC & 3.x (experimental)
vor 9 Jahren
Frank
9074be84f0
The buffer for digits after the decimal-point is on the stack, so i think it's not a problem to make it slightly bigger.
https://forum.pjrc.com/threads/31233-float-and-double?p=86860&viewfull=1#post86860
vor 9 Jahren
PaulStoffregen
7a6898b59d
Add bool operator to HardwareSerial
vor 9 Jahren
Defragster
9d0e0143bd
Fix for dtostrf on floats under zero
Per forum
https://forum.pjrc.com/threads/1227-Teensy3-alternative-for-dtostrf()?p=86671&viewfull=1#post86671
vor 9 Jahren
PaulStoffregen
b9044c4289
Add doughboy's alternate serial1 code (for reference only, not used yet)
vor 9 Jahren
PaulStoffregen
c6e6060c48
whitespace reformat in serial code
vor 9 Jahren
PaulStoffregen
7e46ee291b
Add 2 channel enable flags for I2S
vor 9 Jahren
Thierry Frenkel
0e397cc970
Allow low frequencies for analogWriteFrequency
In case the desired frequency is too low to be obtained with F_TIMER
because prescale and mod were at their limits, switch automatically to
the alternative clock source (31250Hz) before determining prescale and
mod with the same algorithm as before.
vor 9 Jahren
PaulStoffregen
c4289ff4c5
Improve tone(), always complete current cycle before change to new frequency
vor 9 Jahren
PaulStoffregen
d1a6e77ad9
Begin work on MTP Disk
vor 9 Jahren
PaulStoffregen
d5a1b9745b
Add __bss_start__ and __bss_end__, improves compatibility with other software
vor 9 Jahren
PaulStoffregen
aa212b61e0
Defs for MK66FX1M0
vor 9 Jahren
Frank
628addbd49
See Reference Manual Page 1350
50.6.2 SCAN Control register
Bug found by Chronologist, https://forum.pjrc.com/threads/29624-Using-TSI-for-capacitance-measurement
vor 9 Jahren
PaulStoffregen
345b03b31f
Someday Teensy-LC will have audio, but only 22 kHz sample rate
vor 9 Jahren
PaulStoffregen
c2f550d378
Add serial flow control C functions
https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425
vor 9 Jahren
PaulStoffregen
7dd78d023a
Reduce flash clock in 168 MHz overclock mode
vor 9 Jahren
PaulStoffregen
f2948bd195
Add UART register bit definitions
vor 9 Jahren
PaulStoffregen
05fa587cc4
Add more register defs
vor 9 Jahren
PaulStoffregen
1e49af2dd2
Add register definitions
vor 9 Jahren
Jorg Bliesener
fe29d9e740
Bugfixes and comments
vor 9 Jahren
Jorg Bliesener
32d841e418
usb_flightsim changes for XPlaneRefs with names >58 chars
vor 9 Jahren
Karg
09f8b04899
Added full support for Midi Time Codes and Real Time messages
can now receive and send Midi Time Codes
and send Real Time messages
vor 9 Jahren
PaulStoffregen
4cf71a44c8
Use mlu's further optimization of divmod10
https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1?p=76072&viewfull=1#post76072
vor 9 Jahren
PaulStoffregen
71ba6b2adb
Speedup print() on Teensy-LC
vor 9 Jahren
Jorg Neves Bliesener
f2ed8c5dc3
Fix packet stuffing in usb_flightsim_flush_callback
vor 9 Jahren
PaulStoffregen
37e24b0107
define SERIAL_PORT_MONITOR to Serial1 when USB is disabled
vor 9 Jahren
PaulStoffregen
0bdac50dcb
Add PDB channel 1 register definitions
https://forum.pjrc.com/threads/25153-PDB0CH1-register-definitions
vor 9 Jahren
PaulStoffregen
ca6b6fd9b0
opps, fix delayMicroseconds on Teensy-LC at 24 MHz for realz
vor 9 Jahren
PaulStoffregen
00d45085e6
fix delayMicroseconds on Teensy-LC at 24 MHz
https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1?p=75775&viewfull=1#post75775
vor 9 Jahren
PaulStoffregen
61b29fa289
Optimize delayMicroseconds() on Teensy-LC
https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1
vor 9 Jahren
kbob
c1cedab25a
Defined FTM_SC_DMA on KINETIS-L chips.
vor 9 Jahren
kbob
3676d1621f
Corrected conversion from words to bytes in transferCount().
vor 9 Jahren
PaulStoffregen
2ee5a630c8
Add license headers to AVR emulation header files
vor 9 Jahren
PaulStoffregen
66b28afda0
Fix initial delay bug on Teensy-LC
https://forum.pjrc.com/threads/28325-Teensy-LC-and-delay
vor 9 Jahren
FrankBoesing
7d3da62a48
strlen is already in string.h
or, alternativly one could write size_t strlen(const char *s) {return __builtin_strlen(s);} to use the gcc-builtin function.
I think, both are faster than the bytewise search.
vor 9 Jahren
PaulStoffregen
28a3eb04f0
analogWriteFrequency uses float for frequency
vor 9 Jahren
FrankBoesing
3bc1d5f9e8
millis()
systick_millis_count is already volatile, doing it twice is not needed.
vor 9 Jahren
PaulStoffregen
8cd4703817
Use gcc memory barriers in IRQ enable/disable
vor 9 Jahren
PaulStoffregen
a8818e0058
Default Systick to priority 32 (don't hog highest priority)
vor 9 Jahren
PaulStoffregen
0dcc3a1f5e
Fix NVIC_TRIGGER_IRQ on Teensy-LC
vor 10 Jahren
PaulStoffregen
8545ba7ffb
Fix USB flightsim on Teensy-LC
vor 10 Jahren
PaulStoffregen
3bc1d7c08b
Fix E2END
vor 10 Jahren
PaulStoffregen
7a750fe78e
Improve avr eeprom emulation, E2END
vor 10 Jahren
PaulStoffregen
c4054203a7
Fix more compiler warnings
vor 10 Jahren
PaulStoffregen
809219a11a
Fix compiler warnings
vor 10 Jahren
crteensy
0064485e41
Update kinetis.h
- Added bit definitions for the PIT
- limited Teensy LC to only two PITs
- added PIT_LTMR64 for Teensy LC
vor 10 Jahren
FrankBoesing
61ba19bd11
CS initialization corrected
vor 10 Jahren
PaulStoffregen
6ed0c5f01f
Fix Hardware Serial transmitterEnable() on Teensy-LC
vor 10 Jahren
PaulStoffregen
5c9ccd8412
Fix 9 bit transmit mode on Serial3
vor 10 Jahren
PaulStoffregen
eb3e46ac85
Improve printf_P() compatibility on Teensy 3.x
vor 10 Jahren