thewknd
6aa957082f
check SIM_SCGC2_LPUART0 in serial6_set_tx
7 anos atrás
Frank Bösing
cecfe51276
Set RTS Watermarks dependend of rx-buffersize
8 anos atrás
Frank Bösing
6dd6073c2c
serialX buffersizes
Additional PR for SERIALX_DISABLE follows
8 anos atrás
Kurt Eckhardt
899cbecc02
Enable Uart 2 stop bit capabilities
The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have
ability to turn on 2 stop bits. So enabled on these boards.
8 anos atrás
Kurt Eckhardt
89d92016c1
Pass at serial6_format
8 anos atrás
Kurt Eckhardt
d2f9acc78c
Try using BITBAND to turn on/off TIE and TCIE
Make update of these flags be hopefully interrupt safe
8 anos atrás
Kurt Eckhardt
7352ea7791
Add Serial6 - T3.4 Uart5, T3.5 LPUart0
This is a WIP, But I have now been able to create Serial6 on T3.4 beta,
and so far have tested Send/Receive basic stuff at 115200 and have tried
at several CPU speeds in MHZ (192, 216, 180, 120, 96)
8 anos atrás
PaulStoffregen
5eab8dd0b8
Fix pin numbers for transmit opendrain on Serial4 & Serial5
8 anos atrás
Kurt Eckhardt
7458590a29
Allow SetTX on Serial3/4/5 ...
On Serial 3 this addition is for all 3.x. Before it was ifdefed to only
do work on Teensy_LC as there is only one valid TX pin. But we now pass
in open drain as an option so this code should allow you to not turn it
on/off on Serial3 on all of these boards
and on Serial4 and Serial5 on the new boards.
8 anos atrás
PaulStoffregen
8b3d33689e
Add Serial4 & Serial5 for K64 & K66
8 anos atrás
PaulStoffregen
1e5260347f
Add opendrain option to Serial#.setTX
8 anos atrás
PaulStoffregen
e3989b19f3
Add HardwareSerial setRX(pin) & setTX(pin)
8 anos atrás
PaulStoffregen
0254d93d95
Teensy-LC doesn't support CTS, so disable its code
8 anos atrás
PaulStoffregen
6e0dd8ab39
Use software-based RTS on Serial2 and Serial3
8 anos atrás
PaulStoffregen
c6e6060c48
whitespace reformat in serial code
9 anos atrás
PaulStoffregen
c2f550d378
Add serial flow control C functions
https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425
9 anos atrás
PaulStoffregen
6ed0c5f01f
Fix Hardware Serial transmitterEnable() on Teensy-LC
9 anos atrás
PaulStoffregen
5c9ccd8412
Fix 9 bit transmit mode on Serial3
9 anos atrás
PaulStoffregen
e2bf6d44e0
Avoid kinetis.h name conflicts with simple Arduino names
9 anos atrás
PaulStoffregen
182037caea
Fix 9 bit hardware serial receive
https://forum.pjrc.com/threads/27093-Fix-for-9-bit-serial-receive-bug
9 anos atrás
PaulStoffregen
9b8d74c089
Initial support for Teensy-LC
9 anos atrás
PaulStoffregen
19ee965759
Add transmitterEnable on Serial2 & Serial3
10 anos atrás
PaulStoffregen
9c1e41e70e
Change room() to writeBufferFree()
https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ
10 anos atrás
PaulStoffregen
479bde6866
Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h
10 anos atrás
PaulStoffregen
603afcc984
Fix off-by-1 error in new Serial#.room()
10 anos atrás
PaulStoffregen
d289954223
Add Serial1-3.room()
http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1
http://forum.arduino.cc/index.php/topic,165574.0.html
10 anos atrás
PaulStoffregen
f2cecda077
Use IRQ_PRIORITY (not hard-coded number) in Serial3
10 anos atrás
PaulStoffregen
7ba1cbccc6
Add NVIC priority handling in Serial2 & Serial3
11 anos atrás
PaulStoffregen
29168b784d
Add serial formats and 9 bit modes (disabled by default) to HardwareSerial
11 anos atrás
PaulStoffregen
5cecdee933
Initial commit, version 1.17-rc1
11 anos atrás