/* Teensyduino Core Library * http://www.pjrc.com/teensy/ * Copyright (c) 2013 PJRC.COM, LLC. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * 1. The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * 2. If the Software is incorporated into a build system that allows * selection among a list of target devices, then similar target * devices manufactured by PJRC.COM must be included in the list of * target devices and selectable in the same manner. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _usb_desc_h_ #define _usb_desc_h_ #if F_CPU >= 20000000 // This header is NOT meant to be included when compiling // user sketches in Arduino. The low-level functions // provided by usb_dev.c are meant to be called only by // code which provides higher-level interfaces to the user. #include #include #define ENDPOINT_UNUSED 0x00 #define ENDPOINT_TRANSIMIT_ONLY 0x15 #define ENDPOINT_RECEIVE_ONLY 0x19 #define ENDPOINT_TRANSMIT_AND_RECEIVE 0x1D /* To modify a USB Type to have different interfaces, start in this file. Delete the XYZ_INTERFACE lines for any interfaces you wish to remove, and copy them from another USB Type for any you want to add. Give each interface a unique number, and edit NUM_INTERFACE to reflect the number of interfaces. Within each interface, make sure it uses a unique set of endpoints. Edit NUM_ENDPOINTS to be at least the largest endpoint number used. Then edit the ENDPOINT*_CONFIG lines so each endpoint is configured the proper way (transmit, receive, or both). The CONFIG_DESC_SIZE and any XYZ_DESC_OFFSET numbers must be edited to the correct sizes. See usb_desc.c for the giant array of bytes. Someday these may be done automatically..... (but how?) If you are using existing interfaces, the code in each file should automatically adapt to the changes you specify. If you need to create a new type of interface, you'll need to write the code which sends and receives packets, and presents an API to the user. Finally, edit usb_inst.cpp, which creats instances of the C++ objects for each combination. Some operating systems, especially Windows, may cache USB device info. Changes to the device name may not update on the same computer unless the vendor or product ID numbers change, or the "bcdDevice" revision code is increased. If these instructions are missing steps or could be improved, please let me know? http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports */ #if defined(USB_SERIAL) #define VENDOR_ID 0x16C0 #define PRODUCT_ID 0x0483 #define DEVICE_CLASS 2 // 2 = Communication Class #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'} #define MANUFACTURER_NAME_LEN 11 #define PRODUCT_NAME {'U','S','B',' ','S','e','r','i','a','l'} #define PRODUCT_NAME_LEN 10 #define EP0_SIZE 64 #define NUM_ENDPOINTS 4 #define NUM_USB_BUFFERS 12 #define NUM_INTERFACE 2 #define CDC_STATUS_INTERFACE 0 #define CDC_DATA_INTERFACE 1 #define CDC_ACM_ENDPOINT 2 #define CDC_RX_ENDPOINT 3 #define CDC_TX_ENDPOINT 4 #define CDC_ACM_SIZE 16 #define CDC_RX_SIZE 64 #define CDC_TX_SIZE 64 #define CONFIG_DESC_SIZE (9+9+5+5+4+5+7+9+7+7) #define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY #elif defined(USB_HID) #define VENDOR_ID 0x16C0 #define PRODUCT_ID 0x0482 #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'} #define MANUFACTURER_NAME_LEN 11 #define PRODUCT_NAME {'K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'} #define PRODUCT_NAME_LEN 23 #define EP0_SIZE 64 #define NUM_ENDPOINTS 5 #define NUM_USB_BUFFERS 24 #define NUM_INTERFACE 4 #define SEREMU_INTERFACE 2 // Serial emulation #define SEREMU_TX_ENDPOINT 1 #define SEREMU_TX_SIZE 64 #define SEREMU_TX_INTERVAL 1 #define SEREMU_RX_ENDPOINT 2 #define SEREMU_RX_SIZE 32 #define SEREMU_RX_INTERVAL 2 #define KEYBOARD_INTERFACE 0 // Keyboard #define KEYBOARD_ENDPOINT 3 #define KEYBOARD_SIZE 8 #define KEYBOARD_INTERVAL 1 #define MOUSE_INTERFACE 1 // Mouse #define MOUSE_ENDPOINT 5 #define MOUSE_SIZE 8 #define MOUSE_INTERVAL 1 #define JOYSTICK_INTERFACE 3 // Joystick #define JOYSTICK_ENDPOINT 4 #define JOYSTICK_SIZE 16 #define JOYSTICK_INTERVAL 2 #define KEYBOARD_DESC_OFFSET (9 + 9) #define MOUSE_DESC_OFFSET (9 + 9+9+7 + 9) #define SEREMU_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9) #define JOYSTICK_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9) #define CONFIG_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9+9+7) #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY #elif defined(USB_SERIAL_HID) #define VENDOR_ID 0x16C0 #define PRODUCT_ID 0x0487 #define DEVICE_CLASS 0xEF #define DEVICE_SUBCLASS 0x02 #define DEVICE_PROTOCOL 0x01 #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'} #define MANUFACTURER_NAME_LEN 11 #define PRODUCT_NAME {'S','e','r','i','a','l','/','K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'} #define PRODUCT_NAME_LEN 30 #define EP0_SIZE 64 #define NUM_ENDPOINTS 6 #define NUM_USB_BUFFERS 30 #define NUM_INTERFACE 5 #define CDC_IAD_DESCRIPTOR 1 #define CDC_STATUS_INTERFACE 0 #define CDC_DATA_INTERFACE 1 // Serial #define CDC_ACM_ENDPOINT 2 #define CDC_RX_ENDPOINT 3 #define CDC_TX_ENDPOINT 4 #define CDC_ACM_SIZE 16 #define CDC_RX_SIZE 64 #define CDC_TX_SIZE 64 #define KEYBOARD_INTERFACE 2 // Keyboard #define KEYBOARD_ENDPOINT 1 #define KEYBOARD_SIZE 8 #define KEYBOARD_INTERVAL 1 #define MOUSE_INTERFACE 3 // Mouse #define MOUSE_ENDPOINT 5 #define MOUSE_SIZE 8 #define MOUSE_INTERVAL 2 #define JOYSTICK_INTERFACE 4 // Joystick #define JOYSTICK_ENDPOINT 6 #define JOYSTICK_SIZE 16 #define JOYSTICK_INTERVAL 1 #define KEYBOARD_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9) #define MOUSE_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9) #define JOYSTICK_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9) #define CONFIG_DESC_SIZE (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7) #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT6_CONFIG ENDPOINT_TRANSIMIT_ONLY #elif defined(USB_MIDI) #define VENDOR_ID 0x16C0 #define PRODUCT_ID 0x0485 #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'} #define MANUFACTURER_NAME_LEN 11 #define PRODUCT_NAME {'T','e','e','n','s','y',' ','M','I','D','I'} #define PRODUCT_NAME_LEN 11 #define EP0_SIZE 64 #define NUM_ENDPOINTS 4 #define NUM_USB_BUFFERS 16 #define NUM_INTERFACE 2 #define SEREMU_INTERFACE 1 // Serial emulation #define SEREMU_TX_ENDPOINT 1 #define SEREMU_TX_SIZE 64 #define SEREMU_TX_INTERVAL 1 #define SEREMU_RX_ENDPOINT 2 #define SEREMU_RX_SIZE 32 #define SEREMU_RX_INTERVAL 2 #define MIDI_INTERFACE 0 // MIDI #define MIDI_TX_ENDPOINT 3 #define MIDI_TX_SIZE 64 #define MIDI_RX_ENDPOINT 4 #define MIDI_RX_SIZE 64 #define SEREMU_DESC_OFFSET (9 + 9+7+6+6+9+9+9+5+9+5 + 9) #define CONFIG_DESC_SIZE (9 + 9+7+6+6+9+9+9+5+9+5 + 9+9+7+7) #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY #elif defined(USB_RAWHID) #define VENDOR_ID 0x16C0 #define PRODUCT_ID 0x0486 #define RAWHID_USAGE_PAGE 0xFFAB // recommended: 0xFF00 to 0xFFFF #define RAWHID_USAGE 0x0200 // recommended: 0x0100 to 0xFFFF #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'} #define MANUFACTURER_NAME_LEN 11 #define PRODUCT_NAME {'T','e','e','n','s','y','d','u','i','n','o',' ','R','a','w','H','I','D'} #define PRODUCT_NAME_LEN 18 #define EP0_SIZE 64 #define NUM_ENDPOINTS 6 #define NUM_USB_BUFFERS 12 #define NUM_INTERFACE 2 #define RAWHID_INTERFACE 0 // RawHID #define RAWHID_TX_ENDPOINT 3 #define RAWHID_TX_SIZE 64 #define RAWHID_TX_INTERVAL 1 #define RAWHID_RX_ENDPOINT 4 #define RAWHID_RX_SIZE 64 #define RAWHID_RX_INTERVAL 1 #define SEREMU_INTERFACE 1 // Serial emulation #define SEREMU_TX_ENDPOINT 1 #define SEREMU_TX_SIZE 64 #define SEREMU_TX_INTERVAL 1 #define SEREMU_RX_ENDPOINT 2 #define SEREMU_RX_SIZE 32 #define SEREMU_RX_INTERVAL 2 #define RAWHID_DESC_OFFSET (9 + 9) #define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9) #define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7) #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY #elif defined(USB_FLIGHTSIM) #define VENDOR_ID 0x16C0 #define PRODUCT_ID 0x0488 #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'} #define MANUFACTURER_NAME_LEN 11 #define PRODUCT_NAME {'T','e','e','n','s','y',' ','F','l','i','g','h','t',' ','S','i','m',' ','C','o','n','t','r','o','l','s'} #define PRODUCT_NAME_LEN 26 #define EP0_SIZE 64 #define NUM_ENDPOINTS 4 #define NUM_USB_BUFFERS 20 #define NUM_INTERFACE 2 #define FLIGHTSIM_INTERFACE 0 // Flight Sim Control #define FLIGHTSIM_TX_ENDPOINT 3 #define FLIGHTSIM_TX_SIZE 64 #define FLIGHTSIM_TX_INTERVAL 1 #define FLIGHTSIM_RX_ENDPOINT 4 #define FLIGHTSIM_RX_SIZE 64 #define FLIGHTSIM_RX_INTERVAL 1 #define SEREMU_INTERFACE 1 // Serial emulation #define SEREMU_TX_ENDPOINT 1 #define SEREMU_TX_SIZE 64 #define SEREMU_TX_INTERVAL 1 #define SEREMU_RX_ENDPOINT 2 #define SEREMU_RX_SIZE 32 #define SEREMU_RX_INTERVAL 2 #define FLIGHTSIM_DESC_OFFSET (9 + 9) #define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9) #define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7) #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY #endif #ifdef NUM_ENDPOINTS // NUM_ENDPOINTS = number of non-zero endpoints (0 to 15) extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS]; typedef struct { uint16_t wValue; uint16_t wIndex; const uint8_t *addr; uint16_t length; } usb_descriptor_list_t; extern const usb_descriptor_list_t usb_descriptor_list[]; #endif // NUM_ENDPOINTS #endif // F_CPU >= 20 MHz #endif