/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _avr_emulation_h_
#define _avr_emulation_h_
#include "kinetis.h"
#include "core_pins.h"
#include "pins_arduino.h"
#ifdef __cplusplus
#define GPIO_BITBAND_ADDR(reg, bit) (((uint32_t)&(reg) - 0x40000000) * 32 + (bit) * 4 + 0x42000000)
#define CONFIG_PULLUP (PORT_PCR_MUX(1) | PORT_PCR_PE | PORT_PCR_PS)
#define CONFIG_NOPULLUP (PORT_PCR_MUX(1))
#if defined(KINETISK)
// bitband addressing for atomic access to data direction register
#define GPIO_SETBIT_ATOMIC(reg, bit) (*(uint32_t *)GPIO_BITBAND_ADDR((reg), (bit)) = 1)
#define GPIO_CLRBIT_ATOMIC(reg, bit) (*(uint32_t *)GPIO_BITBAND_ADDR((reg), (bit)) = 0)
#elif defined(KINETISL)
// bit manipulation engine for atomic access to data direction register
#define GPIO_SETBIT_ATOMIC(reg, bit) (*(uint32_t *)(((uint32_t)&(reg) - 0xF8000000) | 0x480FF000) = 1 << (bit))
#define GPIO_CLRBIT_ATOMIC(reg, bit) (*(uint32_t *)(((uint32_t)&(reg) - 0xF8000000) | 0x440FF000) = ~(1 << (bit)))
#endif
class PORTDemulation
{
public:
inline PORTDemulation & operator = (int val) __attribute__((always_inline)) {
digitalWriteFast(0, (val & (1<<0)));
if (!(CORE_PIN0_DDRREG & CORE_PIN0_BIT))
CORE_PIN0_CONFIG = ((val & (1<<0)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(1, (val & (1<<1)));
if (!(CORE_PIN1_DDRREG & CORE_PIN1_BIT))
CORE_PIN1_CONFIG = ((val & (1<<1)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(2, (val & (1<<2)));
if (!(CORE_PIN2_DDRREG & CORE_PIN2_BIT))
CORE_PIN2_CONFIG = ((val & (1<<2)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(3, (val & (1<<3)));
if (!(CORE_PIN3_DDRREG & CORE_PIN3_BIT))
CORE_PIN3_CONFIG = ((val & (1<<3)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(4, (val & (1<<4)));
if (!(CORE_PIN4_DDRREG & CORE_PIN4_BIT))
CORE_PIN4_CONFIG = ((val & (1<<4)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(5, (val & (1<<5)));
if (!(CORE_PIN5_DDRREG & CORE_PIN5_BIT))
CORE_PIN5_CONFIG = ((val & (1<<5)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(6, (val & (1<<6)));
if (!(CORE_PIN6_DDRREG & CORE_PIN6_BIT))
CORE_PIN6_CONFIG = ((val & (1<<6)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(7, (val & (1<<7)));
if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT))
CORE_PIN7_CONFIG = ((val & (1<<7)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
return *this;
}
inline PORTDemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & (1<<0)) {
digitalWriteFast(0, HIGH);
if (!(CORE_PIN0_DDRREG & CORE_PIN0_BIT)) CORE_PIN0_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<1)) {
digitalWriteFast(1, HIGH);
if (!(CORE_PIN1_DDRREG & CORE_PIN1_BIT)) CORE_PIN1_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<2)) {
digitalWriteFast(2, HIGH);
if (!(CORE_PIN2_DDRREG & CORE_PIN2_BIT)) CORE_PIN2_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<3)) {
digitalWriteFast(3, HIGH);
if (!(CORE_PIN3_DDRREG & CORE_PIN3_BIT)) CORE_PIN3_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<4)) {
digitalWriteFast(4, HIGH);
if (!(CORE_PIN4_DDRREG & CORE_PIN4_BIT)) CORE_PIN4_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<5)) {
digitalWriteFast(5, HIGH);
if (!(CORE_PIN5_DDRREG & CORE_PIN5_BIT)) CORE_PIN5_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<6)) {
digitalWriteFast(6, HIGH);
if (!(CORE_PIN6_DDRREG & CORE_PIN6_BIT)) CORE_PIN6_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<7)) {
digitalWriteFast(7, HIGH);
if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN7_CONFIG = CONFIG_PULLUP;
}
return *this;
}
inline PORTDemulation & operator &= (int val) __attribute__((always_inline)) {
if (!(val & (1<<0))) {
digitalWriteFast(0, LOW);
if (!(CORE_PIN0_DDRREG & CORE_PIN0_BIT)) CORE_PIN0_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<1))) {
digitalWriteFast(1, LOW);
if (!(CORE_PIN1_DDRREG & CORE_PIN1_BIT)) CORE_PIN1_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<2))) {
digitalWriteFast(2, LOW);
if (!(CORE_PIN2_DDRREG & CORE_PIN2_BIT)) CORE_PIN2_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<3))) {
digitalWriteFast(3, LOW);
if (!(CORE_PIN3_DDRREG & CORE_PIN3_BIT)) CORE_PIN3_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<4))) {
digitalWriteFast(4, LOW);
if (!(CORE_PIN4_DDRREG & CORE_PIN4_BIT)) CORE_PIN4_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<5))) {
digitalWriteFast(5, LOW);
if (!(CORE_PIN5_DDRREG & CORE_PIN5_BIT)) CORE_PIN5_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<6))) {
digitalWriteFast(6, LOW);
if (!(CORE_PIN6_DDRREG & CORE_PIN6_BIT)) CORE_PIN6_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<7))) {
digitalWriteFast(7, LOW);
if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN7_CONFIG = CONFIG_NOPULLUP;
}
return *this;
}
};
extern PORTDemulation PORTD;
class PINDemulation
{
public:
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
if ((val & (1<<0)) && digitalReadFast(0)) ret |= (1<<0);
if ((val & (1<<1)) && digitalReadFast(1)) ret |= (1<<1);
if ((val & (1<<2)) && digitalReadFast(2)) ret |= (1<<2);
if ((val & (1<<3)) && digitalReadFast(3)) ret |= (1<<3);
if ((val & (1<<4)) && digitalReadFast(4)) ret |= (1<<4);
if ((val & (1<<5)) && digitalReadFast(5)) ret |= (1<<5);
if ((val & (1<<6)) && digitalReadFast(6)) ret |= (1<<6);
if ((val & (1<<7)) && digitalReadFast(7)) ret |= (1<<7);
return ret;
}
operator int () const __attribute__((always_inline)) {
int ret = 0;
if (digitalReadFast(0)) ret |= (1<<0);
if (digitalReadFast(1)) ret |= (1<<1);
if (digitalReadFast(2)) ret |= (1<<2);
if (digitalReadFast(3)) ret |= (1<<3);
if (digitalReadFast(4)) ret |= (1<<4);
if (digitalReadFast(5)) ret |= (1<<5);
if (digitalReadFast(6)) ret |= (1<<6);
if (digitalReadFast(7)) ret |= (1<<7);
return ret;
}
};
extern PINDemulation PIND;
class DDRDemulation
{
public:
inline DDRDemulation & operator = (int val) __attribute__((always_inline)) {
if (val & (1<<0)) set0(); else clr0();
if (val & (1<<1)) set1(); else clr1();
if (val & (1<<2)) set2(); else clr2();
if (val & (1<<3)) set3(); else clr3();
if (val & (1<<4)) set4(); else clr4();
if (val & (1<<5)) set5(); else clr5();
if (val & (1<<6)) set6(); else clr6();
if (val & (1<<7)) set7(); else clr7();
return *this;
}
inline DDRDemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & (1<<0)) set0();
if (val & (1<<1)) set1();
if (val & (1<<2)) set2();
if (val & (1<<3)) set3();
if (val & (1<<4)) set4();
if (val & (1<<5)) set5();
if (val & (1<<6)) set6();
if (val & (1<<7)) set7();
return *this;
}
inline DDRDemulation & operator &= (int val) __attribute__((always_inline)) {
if (!(val & (1<<0))) clr0();
if (!(val & (1<<1))) clr1();
if (!(val & (1<<2))) clr2();
if (!(val & (1<<3))) clr3();
if (!(val & (1<<4))) clr4();
if (!(val & (1<<5))) clr5();
if (!(val & (1<<6))) clr6();
if (!(val & (1<<7))) clr7();
return *this;
}
private:
inline void set0() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN0_DDRREG, CORE_PIN0_BIT);
CORE_PIN0_CONFIG = CONFIG_PULLUP;
}
inline void set1() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN1_DDRREG, CORE_PIN1_BIT);
CORE_PIN1_CONFIG = CONFIG_PULLUP;
}
inline void set2() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN2_DDRREG, CORE_PIN2_BIT);
CORE_PIN2_CONFIG = CONFIG_PULLUP;
}
inline void set3() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN3_DDRREG, CORE_PIN3_BIT);
CORE_PIN3_CONFIG = CONFIG_PULLUP;
}
inline void set4() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN4_DDRREG, CORE_PIN4_BIT);
CORE_PIN4_CONFIG = CONFIG_PULLUP;
}
inline void set5() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN5_DDRREG, CORE_PIN5_BIT);
CORE_PIN5_CONFIG = CONFIG_PULLUP;
}
inline void set6() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN6_DDRREG, CORE_PIN6_BIT);
CORE_PIN6_CONFIG = CONFIG_PULLUP;
}
inline void set7() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN7_DDRREG, CORE_PIN7_BIT);
CORE_PIN7_CONFIG = CONFIG_PULLUP;
}
inline void clr0() __attribute__((always_inline)) {
CORE_PIN0_CONFIG = ((CORE_PIN0_PORTREG & CORE_PIN0_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN0_DDRREG, CORE_PIN0_BIT);
}
inline void clr1() __attribute__((always_inline)) {
CORE_PIN1_CONFIG = ((CORE_PIN1_PORTREG & CORE_PIN1_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN1_DDRREG, CORE_PIN1_BIT);
}
inline void clr2() __attribute__((always_inline)) {
CORE_PIN2_CONFIG = ((CORE_PIN2_PORTREG & CORE_PIN2_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN2_DDRREG, CORE_PIN2_BIT);
}
inline void clr3() __attribute__((always_inline)) {
CORE_PIN3_CONFIG = ((CORE_PIN3_PORTREG & CORE_PIN3_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN3_DDRREG, CORE_PIN3_BIT);
}
inline void clr4() __attribute__((always_inline)) {
CORE_PIN4_CONFIG = ((CORE_PIN4_PORTREG & CORE_PIN4_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN4_DDRREG, CORE_PIN4_BIT);
}
inline void clr5() __attribute__((always_inline)) {
CORE_PIN5_CONFIG = ((CORE_PIN5_PORTREG & CORE_PIN5_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN5_DDRREG, CORE_PIN5_BIT);
}
inline void clr6() __attribute__((always_inline)) {
CORE_PIN6_CONFIG = ((CORE_PIN6_PORTREG & CORE_PIN6_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN6_DDRREG, CORE_PIN6_BIT);
}
inline void clr7() __attribute__((always_inline)) {
CORE_PIN7_CONFIG = ((CORE_PIN7_PORTREG & CORE_PIN7_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN7_DDRREG, CORE_PIN7_BIT);
}
};
extern DDRDemulation DDRD;
class PORTBemulation
{
public:
inline PORTBemulation & operator = (int val) __attribute__((always_inline)) {
digitalWriteFast(8, (val & (1<<0)));
if (!(CORE_PIN8_DDRREG & CORE_PIN8_BIT))
CORE_PIN8_CONFIG = ((val & (1<<0)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(9, (val & (1<<1)));
if (!(CORE_PIN9_DDRREG & CORE_PIN9_BIT))
CORE_PIN9_CONFIG = ((val & (1<<1)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(10, (val & (1<<2)));
if (!(CORE_PIN10_DDRREG & CORE_PIN10_BIT))
CORE_PIN10_CONFIG = ((val & (1<<2)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(11, (val & (1<<3)));
if (!(CORE_PIN11_DDRREG & CORE_PIN11_BIT))
CORE_PIN11_CONFIG = ((val & (1<<3)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(12, (val & (1<<4)));
if (!(CORE_PIN12_DDRREG & CORE_PIN12_BIT))
CORE_PIN12_CONFIG = ((val & (1<<4)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(13, (val & (1<<5)));
if (!(CORE_PIN13_DDRREG & CORE_PIN13_BIT))
CORE_PIN13_CONFIG = ((val & (1<<5)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
return *this;
}
inline PORTBemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & (1<<0)) {
digitalWriteFast(8, HIGH);
if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN8_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<1)) {
digitalWriteFast(9, HIGH);
if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN9_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<2)) {
digitalWriteFast(10, HIGH);
if (!(CORE_PIN10_DDRREG & CORE_PIN10_BIT)) CORE_PIN10_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<3)) {
digitalWriteFast(11, HIGH);
if (!(CORE_PIN11_DDRREG & CORE_PIN11_BIT)) CORE_PIN11_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<4)) {
digitalWriteFast(12, HIGH);
if (!(CORE_PIN12_DDRREG & CORE_PIN12_BIT)) CORE_PIN12_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<5)) {
digitalWriteFast(13, HIGH);
if (!(CORE_PIN13_DDRREG & CORE_PIN13_BIT)) CORE_PIN13_CONFIG = CONFIG_PULLUP;
}
return *this;
}
inline PORTBemulation & operator &= (int val) __attribute__((always_inline)) {
if (!(val & (1<<0))) {
digitalWriteFast(8, LOW);
if (!(CORE_PIN8_DDRREG & CORE_PIN8_BIT)) CORE_PIN8_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<1))) {
digitalWriteFast(9, LOW);
if (!(CORE_PIN9_DDRREG & CORE_PIN9_BIT)) CORE_PIN9_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<2))) {
digitalWriteFast(10, LOW);
if (!(CORE_PIN10_DDRREG & CORE_PIN10_BIT)) CORE_PIN10_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<3))) {
digitalWriteFast(11, LOW);
if (!(CORE_PIN11_DDRREG & CORE_PIN11_BIT)) CORE_PIN11_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<4))) {
digitalWriteFast(12, LOW);
if (!(CORE_PIN12_DDRREG & CORE_PIN12_BIT)) CORE_PIN12_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<5))) {
digitalWriteFast(13, LOW);
if (!(CORE_PIN13_DDRREG & CORE_PIN13_BIT)) CORE_PIN13_CONFIG = CONFIG_NOPULLUP;
}
return *this;
}
};
extern PORTBemulation PORTB;
class PINBemulation
{
public:
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
if ((val & (1<<0)) && digitalReadFast(8)) ret |= (1<<0);
if ((val & (1<<1)) && digitalReadFast(9)) ret |= (1<<1);
if ((val & (1<<2)) && digitalReadFast(10)) ret |= (1<<2);
if ((val & (1<<3)) && digitalReadFast(11)) ret |= (1<<3);
if ((val & (1<<4)) && digitalReadFast(12)) ret |= (1<<4);
if ((val & (1<<5)) && digitalReadFast(13)) ret |= (1<<5);
return ret;
}
operator int () const __attribute__((always_inline)) {
int ret = 0;
if (digitalReadFast(8)) ret |= (1<<0);
if (digitalReadFast(9)) ret |= (1<<1);
if (digitalReadFast(10)) ret |= (1<<2);
if (digitalReadFast(11)) ret |= (1<<3);
if (digitalReadFast(12)) ret |= (1<<4);
if (digitalReadFast(13)) ret |= (1<<5);
return ret;
}
};
extern PINBemulation PINB;
class DDRBemulation
{
public:
inline DDRBemulation & operator = (int val) __attribute__((always_inline)) {
if (val & (1<<0)) set0(); else clr0();
if (val & (1<<1)) set1(); else clr1();
if (val & (1<<2)) set2(); else clr2();
if (val & (1<<3)) set3(); else clr3();
if (val & (1<<4)) set4(); else clr4();
if (val & (1<<5)) set5(); else clr5();
return *this;
}
inline DDRBemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & (1<<0)) set0();
if (val & (1<<1)) set1();
if (val & (1<<2)) set2();
if (val & (1<<3)) set3();
if (val & (1<<4)) set4();
if (val & (1<<5)) set5();
return *this;
}
inline DDRBemulation & operator &= (int val) __attribute__((always_inline)) {
if (!(val & (1<<0))) clr0();
if (!(val & (1<<1))) clr1();
if (!(val & (1<<2))) clr2();
if (!(val & (1<<3))) clr3();
if (!(val & (1<<4))) clr4();
if (!(val & (1<<5))) clr5();
return *this;
}
private:
inline void set0() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN8_DDRREG, CORE_PIN8_BIT);
CORE_PIN8_CONFIG = CONFIG_PULLUP;
}
inline void set1() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN9_DDRREG, CORE_PIN9_BIT);
CORE_PIN9_CONFIG = CONFIG_PULLUP;
}
inline void set2() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN10_DDRREG, CORE_PIN10_BIT);
CORE_PIN10_CONFIG = CONFIG_PULLUP;
}
inline void set3() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN11_DDRREG, CORE_PIN11_BIT);
CORE_PIN11_CONFIG = CONFIG_PULLUP;
}
inline void set4() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN12_DDRREG, CORE_PIN12_BIT);
CORE_PIN12_CONFIG = CONFIG_PULLUP;
}
inline void set5() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN13_DDRREG, CORE_PIN13_BIT);
CORE_PIN13_CONFIG = CONFIG_PULLUP;
}
inline void clr0() __attribute__((always_inline)) {
CORE_PIN8_CONFIG = ((CORE_PIN8_PORTREG & CORE_PIN8_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN8_DDRREG, CORE_PIN8_BIT);
}
inline void clr1() __attribute__((always_inline)) {
CORE_PIN9_CONFIG = ((CORE_PIN9_PORTREG & CORE_PIN9_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN9_DDRREG, CORE_PIN9_BIT);
}
inline void clr2() __attribute__((always_inline)) {
CORE_PIN10_CONFIG = ((CORE_PIN10_PORTREG & CORE_PIN10_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN10_DDRREG, CORE_PIN10_BIT);
}
inline void clr3() __attribute__((always_inline)) {
CORE_PIN11_CONFIG = ((CORE_PIN11_PORTREG & CORE_PIN11_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN11_DDRREG, CORE_PIN11_BIT);
}
inline void clr4() __attribute__((always_inline)) {
CORE_PIN12_CONFIG = ((CORE_PIN12_PORTREG & CORE_PIN12_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN12_DDRREG, CORE_PIN12_BIT);
}
inline void clr5() __attribute__((always_inline)) {
CORE_PIN13_CONFIG = ((CORE_PIN13_PORTREG & CORE_PIN13_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN13_DDRREG, CORE_PIN13_BIT);
}
};
extern DDRBemulation DDRB;
class PORTCemulation
{
public:
inline PORTCemulation & operator = (int val) __attribute__((always_inline)) {
digitalWriteFast(14, (val & (1<<0)));
if (!(CORE_PIN14_DDRREG & CORE_PIN14_BIT))
CORE_PIN14_CONFIG = ((val & (1<<0)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(15, (val & (1<<1)));
if (!(CORE_PIN15_DDRREG & CORE_PIN15_BIT))
CORE_PIN15_CONFIG = ((val & (1<<1)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(16, (val & (1<<2)));
if (!(CORE_PIN16_DDRREG & CORE_PIN16_BIT))
CORE_PIN16_CONFIG = ((val & (1<<2)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(17, (val & (1<<3)));
if (!(CORE_PIN17_DDRREG & CORE_PIN17_BIT))
CORE_PIN17_CONFIG = ((val & (1<<3)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(18, (val & (1<<4)));
if (!(CORE_PIN18_DDRREG & CORE_PIN18_BIT))
CORE_PIN18_CONFIG = ((val & (1<<4)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
digitalWriteFast(19, (val & (1<<5)));
if (!(CORE_PIN19_DDRREG & CORE_PIN19_BIT))
CORE_PIN19_CONFIG = ((val & (1<<5)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
return *this;
}
inline PORTCemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & (1<<0)) {
digitalWriteFast(14, HIGH);
if (!(CORE_PIN14_DDRREG & CORE_PIN14_BIT)) CORE_PIN14_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<1)) {
digitalWriteFast(15, HIGH);
if (!(CORE_PIN15_DDRREG & CORE_PIN15_BIT)) CORE_PIN15_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<2)) {
digitalWriteFast(16, HIGH);
if (!(CORE_PIN16_DDRREG & CORE_PIN16_BIT)) CORE_PIN16_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<3)) {
digitalWriteFast(17, HIGH);
if (!(CORE_PIN17_DDRREG & CORE_PIN17_BIT)) CORE_PIN17_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<4)) {
digitalWriteFast(18, HIGH);
if (!(CORE_PIN18_DDRREG & CORE_PIN18_BIT)) CORE_PIN18_CONFIG = CONFIG_PULLUP;
}
if (val & (1<<5)) {
digitalWriteFast(19, HIGH);
if (!(CORE_PIN19_DDRREG & CORE_PIN19_BIT)) CORE_PIN19_CONFIG = CONFIG_PULLUP;
}
return *this;
}
inline PORTCemulation & operator &= (int val) __attribute__((always_inline)) {
if (!(val & (1<<0))) {
digitalWriteFast(14, LOW);
if (!(CORE_PIN14_DDRREG & CORE_PIN14_BIT)) CORE_PIN14_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<1))) {
digitalWriteFast(15, LOW);
if (!(CORE_PIN15_DDRREG & CORE_PIN15_BIT)) CORE_PIN15_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<2))) {
digitalWriteFast(16, LOW);
if (!(CORE_PIN16_DDRREG & CORE_PIN16_BIT)) CORE_PIN16_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<3))) {
digitalWriteFast(17, LOW);
if (!(CORE_PIN17_DDRREG & CORE_PIN17_BIT)) CORE_PIN17_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<4))) {
digitalWriteFast(18, LOW);
if (!(CORE_PIN18_DDRREG & CORE_PIN18_BIT)) CORE_PIN18_CONFIG = CONFIG_NOPULLUP;
}
if (!(val & (1<<5))) {
digitalWriteFast(19, LOW);
if (!(CORE_PIN19_DDRREG & CORE_PIN19_BIT)) CORE_PIN19_CONFIG = CONFIG_NOPULLUP;
}
return *this;
}
};
extern PORTCemulation PORTC;
class PINCemulation
{
public:
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
if ((val & (1<<0)) && digitalReadFast(8)) ret |= (1<<0);
if ((val & (1<<1)) && digitalReadFast(9)) ret |= (1<<1);
if ((val & (1<<2)) && digitalReadFast(10)) ret |= (1<<2);
if ((val & (1<<3)) && digitalReadFast(11)) ret |= (1<<3);
if ((val & (1<<4)) && digitalReadFast(12)) ret |= (1<<4);
if ((val & (1<<5)) && digitalReadFast(13)) ret |= (1<<5);
return ret;
}
operator int () const __attribute__((always_inline)) {
int ret = 0;
if (digitalReadFast(8)) ret |= (1<<0);
if (digitalReadFast(9)) ret |= (1<<1);
if (digitalReadFast(10)) ret |= (1<<2);
if (digitalReadFast(11)) ret |= (1<<3);
if (digitalReadFast(12)) ret |= (1<<4);
if (digitalReadFast(13)) ret |= (1<<5);
return ret;
}
};
extern PINCemulation PINC;
class DDRCemulation
{
public:
inline DDRCemulation & operator = (int val) __attribute__((always_inline)) {
if (val & (1<<0)) set0(); else clr0();
if (val & (1<<1)) set1(); else clr1();
if (val & (1<<2)) set2(); else clr2();
if (val & (1<<3)) set3(); else clr3();
if (val & (1<<4)) set4(); else clr4();
if (val & (1<<5)) set5(); else clr5();
return *this;
}
inline DDRCemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & (1<<0)) set0();
if (val & (1<<1)) set1();
if (val & (1<<2)) set2();
if (val & (1<<3)) set3();
if (val & (1<<4)) set4();
if (val & (1<<5)) set5();
return *this;
}
inline DDRCemulation & operator &= (int val) __attribute__((always_inline)) {
if (!(val & (1<<0))) clr0();
if (!(val & (1<<1))) clr1();
if (!(val & (1<<2))) clr2();
if (!(val & (1<<3))) clr3();
if (!(val & (1<<4))) clr4();
if (!(val & (1<<5))) clr5();
return *this;
}
private:
inline void set0() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN14_DDRREG, CORE_PIN14_BIT);
CORE_PIN14_CONFIG = CONFIG_PULLUP;
}
inline void set1() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN15_DDRREG, CORE_PIN15_BIT);
CORE_PIN15_CONFIG = CONFIG_PULLUP;
}
inline void set2() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN16_DDRREG, CORE_PIN16_BIT);
CORE_PIN16_CONFIG = CONFIG_PULLUP;
}
inline void set3() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN17_DDRREG, CORE_PIN17_BIT);
CORE_PIN17_CONFIG = CONFIG_PULLUP;
}
inline void set4() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN18_DDRREG, CORE_PIN18_BIT);
CORE_PIN18_CONFIG = CONFIG_PULLUP;
}
inline void set5() __attribute__((always_inline)) {
GPIO_SETBIT_ATOMIC(CORE_PIN19_DDRREG, CORE_PIN19_BIT);
CORE_PIN19_CONFIG = CONFIG_PULLUP;
}
inline void clr0() __attribute__((always_inline)) {
CORE_PIN14_CONFIG = ((CORE_PIN14_PORTREG & CORE_PIN14_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN14_DDRREG, CORE_PIN14_BIT);
}
inline void clr1() __attribute__((always_inline)) {
CORE_PIN15_CONFIG = ((CORE_PIN15_PORTREG & CORE_PIN15_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN15_DDRREG, CORE_PIN15_BIT);
}
inline void clr2() __attribute__((always_inline)) {
CORE_PIN16_CONFIG = ((CORE_PIN16_PORTREG & CORE_PIN16_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN16_DDRREG, CORE_PIN16_BIT);
}
inline void clr3() __attribute__((always_inline)) {
CORE_PIN17_CONFIG = ((CORE_PIN17_PORTREG & CORE_PIN17_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN17_DDRREG, CORE_PIN17_BIT);
}
inline void clr4() __attribute__((always_inline)) {
CORE_PIN18_CONFIG = ((CORE_PIN18_PORTREG & CORE_PIN18_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN18_DDRREG, CORE_PIN18_BIT);
}
inline void clr5() __attribute__((always_inline)) {
CORE_PIN19_CONFIG = ((CORE_PIN19_PORTREG & CORE_PIN19_BITMASK)
? CONFIG_PULLUP : CONFIG_NOPULLUP);
GPIO_CLRBIT_ATOMIC(CORE_PIN19_DDRREG, CORE_PIN19_BIT);
}
};
extern DDRCemulation DDRC;
#define PINB0 0
#define PINB1 1
#define PINB2 2
#define PINB3 3
#define PINB4 4
#define PINB5 5
#define PINB6 6
#define PINB7 7
#define DDB0 0
#define DDB1 1
#define DDB2 2
#define DDB3 3
#define DDB4 4
#define DDB5 5
#define DDB6 6
#define DDB7 7
#define PORTB0 0
#define PORTB1 1
#define PORTB2 2
#define PORTB3 3
#define PORTB4 4
#define PORTB5 5
#define PORTB6 6
#define PORTB7 7
#define PINC0 0
#define PINC1 1
#define PINC2 2
#define PINC3 3
#define PINC4 4
#define PINC5 5
#define PINC6 6
#define DDC0 0
#define DDC1 1
#define DDC2 2
#define DDC3 3
#define DDC4 4
#define DDC5 5
#define DDC6 6
#define PORTC0 0
#define PORTC1 1
#define PORTC2 2
#define PORTC3 3
#define PORTC4 4
#define PORTC5 5
#define PORTC6 6
#define PIND0 0
#define PIND1 1
#define PIND2 2
#define PIND3 3
#define PIND4 4
#define PIND5 5
#define PIND6 6
#define PIND7 7
#define DDD0 0
#define DDD1 1
#define DDD2 2
#define DDD3 3
#define DDD4 4
#define DDD5 5
#define DDD6 6
#define DDD7 7
#define PORTD0 0
#define PORTD1 1
#define PORTD2 2
#define PORTD3 3
#define PORTD4 4
#define PORTD5 5
#define PORTD6 6
#define PORTD7 7
#if 0
extern "C" {
void serial_print(const char *p);
void serial_phex(uint32_t n);
void serial_phex16(uint32_t n);
void serial_phex32(uint32_t n);
}
#endif
// SPI Control Register SPCR
#define SPIE 7 // SPI Interrupt Enable - not supported
#define SPE 6 // SPI Enable
#define DORD 5 // DORD: Data Order
#define MSTR 4 // MSTR: Master/Slave Select
#define CPOL 3 // CPOL: Clock Polarity
#define CPHA 2 // CPHA: Clock Phase
#define SPR1 1 // Clock: 3 = 125 kHz, 2 = 250 kHz, 1 = 1 MHz, 0->4 MHz
#define SPR0 0
// SPI Status Register SPSR
#define SPIF 7 // SPIF: SPI Interrupt Flag
#define WCOL 6 // WCOL: Write COLlision Flag - not implemented
#define SPI2X 0 // SPI2X: Double SPI Speed Bit
// SPI Data Register SPDR
class SPCRemulation;
class SPSRemulation;
class SPDRemulation;
#if defined(KINETISK)
class SPCRemulation
{
public:
inline SPCRemulation & operator = (int val) __attribute__((always_inline)) {
uint32_t ctar, mcr, sim6;
//serial_print("SPCR=");
//serial_phex(val);
//serial_print("\n");
sim6 = SIM_SCGC6;
if (!(sim6 & SIM_SCGC6_SPI0)) {
//serial_print("init1\n");
SIM_SCGC6 = sim6 | SIM_SCGC6_SPI0;
SPI0_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
}
if (!(val & (1<<SPE))) {
SPI0_MCR |= SPI_MCR_MDIS; // TODO: use bitband for atomic access
}
ctar = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1);
if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE;
if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
if (val & (1<<CPHA)) {
ctar |= SPI_CTAR_CPHA;
if ((val & 3) == 0) {
ctar |= SPI_CTAR_BR(1) | SPI_CTAR_ASC(1);
} else if ((val & 3) == 1) {
ctar |= SPI_CTAR_BR(4) | SPI_CTAR_ASC(4);
} else if ((val & 3) == 2) {
ctar |= SPI_CTAR_BR(6) | SPI_CTAR_ASC(6);
} else {
ctar |= SPI_CTAR_BR(7) | SPI_CTAR_ASC(7);
}
} else {
if ((val & 3) == 0) {
ctar |= SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
} else if ((val & 3) == 1) {
ctar |= SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(4);
} else if ((val & 3) == 2) {
ctar |= SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(6);
} else {
ctar |= SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(7);
}
}
ctar |= (SPI0_CTAR0 & SPI_CTAR_DBR);
update_ctar(ctar);
mcr = SPI_MCR_DCONF(0) | SPI_MCR_PCSIS(0x1F);
if (val & (1<<MSTR)) mcr |= SPI_MCR_MSTR;
if (val & (1<<SPE)) {
mcr &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
SPI0_MCR = mcr;
enable_pins();
} else {
mcr |= (SPI_MCR_MDIS | SPI_MCR_HALT);
SPI0_MCR = mcr;
disable_pins();
}
//serial_print("MCR:");
//serial_phex32(SPI0_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI0_CTAR0);
//serial_print("\n");
return *this;
}
inline SPCRemulation & operator |= (int val) __attribute__((always_inline)) {
uint32_t sim6;
//serial_print("SPCR |= ");
//serial_phex(val);
//serial_print("\n");
sim6 = SIM_SCGC6;
if (!(sim6 & SIM_SCGC6_SPI0)) {
//serial_print("init2\n");
SIM_SCGC6 = sim6 | SIM_SCGC6_SPI0;
SPI0_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1);
}
if (val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
uint32_t ctar = SPI0_CTAR0;
if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE; // TODO: use bitband
if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 3) {
// TODO: implement - is this ever really needed
}
if (val & (1<<CPHA) && !(ctar & SPI_CTAR_CPHA)) {
ctar |= SPI_CTAR_CPHA;
// TODO: clear SPI_CTAR_CSSCK, set SPI_CTAR_ASC
}
update_ctar(ctar);
}
if (val & (1<<MSTR)) SPI0_MCR |= SPI_MCR_MSTR;
if (val & (1<<SPE)) {
SPI0_MCR &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
enable_pins();
}
//serial_print("MCR:");
//serial_phex32(SPI0_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI0_CTAR0);
//serial_print("\n");
return *this;
}
inline SPCRemulation & operator &= (int val) __attribute__((always_inline)) {
//serial_print("SPCR &= ");
//serial_phex(val);
//serial_print("\n");
SIM_SCGC6 |= SIM_SCGC6_SPI0;
if (!(val & (1<<SPE))) {
SPI0_MCR |= (SPI_MCR_MDIS | SPI_MCR_HALT);
disable_pins();
}
if ((val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) != ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
uint32_t ctar = SPI0_CTAR0;
if (!(val & (1<<DORD))) ctar &= ~SPI_CTAR_LSBFE; // TODO: use bitband
if (!(val & (1<<CPOL))) ctar &= ~SPI_CTAR_CPOL;
if ((val & 3) == 0) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
}
if (!(val & (1<<CPHA)) && (ctar & SPI_CTAR_CPHA)) {
ctar &= ~SPI_CTAR_CPHA;
// TODO: set SPI_CTAR_ASC, clear SPI_CTAR_CSSCK
}
update_ctar(ctar);
}
if (!(val & (1<<MSTR))) SPI0_MCR &= ~SPI_MCR_MSTR;
return *this;
}
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
//serial_print("SPCR & ");
//serial_phex(val);
//serial_print("\n");
SIM_SCGC6 |= SIM_SCGC6_SPI0;
if ((val & (1<<DORD)) && (SPI0_CTAR0 & SPI_CTAR_LSBFE)) ret |= (1<<DORD);
if ((val & (1<<CPOL)) && (SPI0_CTAR0 & SPI_CTAR_CPOL)) ret |= (1<<CPOL);
if ((val & (1<<CPHA)) && (SPI0_CTAR0 & SPI_CTAR_CPHA)) ret |= (1<<CPHA);
if ((val & 3) == 3) {
uint32_t dbr = SPI0_CTAR0 & 15;
if (dbr <= 1) {
} else if (dbr <= 4) {
ret |= (1<<SPR0);
} else if (dbr <= 6) {
ret |= (1<<SPR1);
} else {
ret |= (1<<SPR1)|(1<<SPR0);
}
} else if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
}
if (val & (1<<SPE) && (!(SPI0_MCR & SPI_MCR_MDIS))) ret |= (1<<SPE);
if (val & (1<<MSTR) && (SPI0_MCR & SPI_MCR_MSTR)) ret |= (1<<MSTR);
//serial_print("ret = ");
//serial_phex(ret);
//serial_print("\n");
return ret;
}
operator int () const __attribute__((always_inline)) {
int ret = 0;
if ((SIM_SCGC6 & SIM_SCGC6_SPI0)) {
int ctar = SPI0_CTAR0;
if (ctar & SPI_CTAR_LSBFE) ret |= (1<<DORD);
if (ctar & SPI_CTAR_CPOL) ret |= (1<<CPOL);
if (ctar & SPI_CTAR_CPHA) ret |= (1<<CPHA);
ctar &= 15;
if (ctar <= 1) {
} else if (ctar <= 4) {
ret |= (1<<SPR0);
} else if (ctar <= 6) {
ret |= (1<<SPR1);
} else {
ret |= (1<<SPR1)|(1<<SPR0);
}
int mcr = SPI0_MCR;
if (!(mcr & SPI_MCR_MDIS)) ret |= (1<<SPE);
if (mcr & SPI_MCR_MSTR) ret |= (1<<MSTR);
}
return ret;
}
inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
uint8_t newpinout = pinout;
// More than two options so now 2 bits
if (pin == 11) newpinout &= ~3;
if (pin == 7) newpinout =(newpinout & ~0x3) | 1;
if (pin == 28) newpinout = (newpinout & ~0x3) | 2;
if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
// First unconfigure previous pin
switch (pinout & 3) {
case 0: CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
case 1: CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
default: CORE_PIN28_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
switch (newpinout & 3) {
case 0: CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); break;
case 1: CORE_PIN7_CONFIG = PORT_PCR_MUX(2); break;
default: CORE_PIN28_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
#else
uint8_t newpinout = pinout;
if (pin == 11) newpinout &= ~1;
if (pin == 7) newpinout |= 1;
if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
if ((newpinout & 1) == 0) {
CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
} else {
CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN7_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
#endif
}
inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
uint8_t newpinout = pinout;
// More than two options so now 2 bits
if (pin == 12) newpinout &= ~0xc;
if (pin == 8) newpinout =(newpinout & ~0xc) | 4;
if (pin == 39) newpinout = (newpinout & ~0xc) | 8;
if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
// First unconfigure previous pin
switch (pinout & 0xc) {
case 0: CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
case 0x4: CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
default: CORE_PIN39_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
switch (newpinout & 0xc) {
case 0: CORE_PIN12_CONFIG = PORT_PCR_MUX(2); break;
case 0x4: CORE_PIN8_CONFIG = PORT_PCR_MUX(2); break;
default: CORE_PIN39_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
#else
uint8_t newpinout = pinout;
if (pin == 12) newpinout &= ~2;
if (pin == 8) newpinout |= 2;
if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
if ((newpinout & 2) == 0) {
CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN12_CONFIG = PORT_PCR_MUX(2);
} else {
CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN8_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
#endif
}
inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
uint8_t newpinout = pinout;
// More than two options so now 2 bits
if (pin == 13) newpinout &= ~0x30;
if (pin == 14) newpinout =(newpinout & ~0x30) | 0x10;
if (pin == 27) newpinout = (newpinout & ~0x30) | 0x20;
if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
// First unconfigure previous pin
switch (pinout & 0x30) {
case 0: CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
case 0x10: CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
default: CORE_PIN27_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
switch (newpinout & 0x30) {
case 0: CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); break;
case 0x10: CORE_PIN14_CONFIG = PORT_PCR_MUX(2); break;
default: CORE_PIN27_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
#else
uint8_t newpinout = pinout;
if (pin == 13) newpinout &= ~4;
if (pin == 14) newpinout |= 4;
if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
if ((newpinout & 4) == 0) {
CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
} else {
CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN14_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
#endif
}
friend class SPSRemulation;
friend class SPIFIFOclass;
private:
static inline void update_ctar(uint32_t ctar) __attribute__((always_inline)) {
if (SPI0_CTAR0 == ctar) return;
uint32_t mcr = SPI0_MCR;
if (mcr & SPI_MCR_MDIS) {
SPI0_CTAR0 = ctar;
} else {
SPI0_MCR = mcr | SPI_MCR_MDIS | SPI_MCR_HALT;
SPI0_CTAR0 = ctar;
SPI0_MCR = mcr;
}
}
static uint8_t pinout;
public:
inline void enable_pins(void) __attribute__((always_inline)) {
//serial_print("enable_pins\n");
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
switch (pinout & 3) {
case 0: CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); break;
case 1: CORE_PIN7_CONFIG = PORT_PCR_MUX(2); break;
default: CORE_PIN28_CONFIG = PORT_PCR_MUX(2);
}
switch (pinout & 0xc) {
case 0: CORE_PIN12_CONFIG = PORT_PCR_MUX(2); break;
case 0x4: CORE_PIN8_CONFIG = PORT_PCR_MUX(2); break;
default: CORE_PIN39_CONFIG = PORT_PCR_MUX(2);
}
switch (pinout & 0x30) {
case 0: CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); break;
case 0x10: CORE_PIN14_CONFIG = PORT_PCR_MUX(2); break;
default: CORE_PIN27_CONFIG = PORT_PCR_MUX(2);
}
#else
if ((pinout & 1) == 0) {
CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // DOUT/MOSI = 11 (PTC6)
} else {
CORE_PIN7_CONFIG = PORT_PCR_MUX(2); // DOUT/MOSI = 7 (PTD2)
}
if ((pinout & 2) == 0) {
CORE_PIN12_CONFIG = PORT_PCR_MUX(2); // DIN/MISO = 12 (PTC7)
} else {
CORE_PIN8_CONFIG = PORT_PCR_MUX(2); // DIN/MISO = 8 (PTD3)
}
if ((pinout & 4) == 0) {
CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // SCK = 13 (PTC5)
} else {
CORE_PIN14_CONFIG = PORT_PCR_MUX(2); // SCK = 14 (PTD1)
}
#endif
}
inline void disable_pins(void) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
switch (pinout & 3) {
case 0: CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
case 1: CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
default: CORE_PIN28_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
switch (pinout & 0xc) {
case 0: CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
case 0x4: CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
default: CORE_PIN39_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
switch (pinout & 0x30) {
case 0: CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
case 0x10: CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
default: CORE_PIN27_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
#else
//serial_print("disable_pins\n");
if ((pinout & 1) == 0) {
CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
} else {
CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
if ((pinout & 2) == 0) {
CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
} else {
CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
if ((pinout & 4) == 0) {
CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
} else {
CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
}
#endif
}
};
extern SPCRemulation SPCR;
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
class SPCR1emulation
{
public:
inline SPCR1emulation & operator = (int val) __attribute__((always_inline)) {
uint32_t ctar, mcr, sim6;
//serial_print("SPCR=");
//serial_phex(val);
//serial_print("\n");
sim6 = SIM_SCGC6;
if (!(sim6 & SIM_SCGC6_SPI1)) {
//serial_print("init1\n");
SIM_SCGC6 = sim6 | SIM_SCGC6_SPI1;
SPI1_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
}
if (!(val & (1<<SPE))) {
SPI1_MCR |= SPI_MCR_MDIS; // TODO: use bitband for atomic access
}
ctar = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1);
if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE;
if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
if (val & (1<<CPHA)) {
ctar |= SPI_CTAR_CPHA;
if ((val & 3) == 0) {
ctar |= SPI_CTAR_BR(1) | SPI_CTAR_ASC(1);
} else if ((val & 3) == 1) {
ctar |= SPI_CTAR_BR(4) | SPI_CTAR_ASC(4);
} else if ((val & 3) == 2) {
ctar |= SPI_CTAR_BR(6) | SPI_CTAR_ASC(6);
} else {
ctar |= SPI_CTAR_BR(7) | SPI_CTAR_ASC(7);
}
} else {
if ((val & 3) == 0) {
ctar |= SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
} else if ((val & 3) == 1) {
ctar |= SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(4);
} else if ((val & 3) == 2) {
ctar |= SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(6);
} else {
ctar |= SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(7);
}
}
ctar |= (SPI1_CTAR0 & SPI_CTAR_DBR);
update_ctar(ctar);
mcr = SPI_MCR_DCONF(0) | SPI_MCR_PCSIS(0x1F);
if (val & (1<<MSTR)) mcr |= SPI_MCR_MSTR;
if (val & (1<<SPE)) {
mcr &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
SPI1_MCR = mcr;
enable_pins();
} else {
mcr |= (SPI_MCR_MDIS | SPI_MCR_HALT);
SPI1_MCR = mcr;
disable_pins();
}
//serial_print("MCR:");
//serial_phex32(SPI1_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI1_CTAR0);
//serial_print("\n");
return *this;
}
inline SPCR1emulation & operator |= (int val) __attribute__((always_inline)) {
uint32_t sim6;
//serial_print("SPCR |= ");
//serial_phex(val);
//serial_print("\n");
sim6 = SIM_SCGC6;
if (!(sim6 & SIM_SCGC6_SPI1)) {
//serial_print("init2\n");
SIM_SCGC6 = sim6 | SIM_SCGC6_SPI1;
SPI1_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1);
}
if (val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
uint32_t ctar = SPI1_CTAR0;
if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE; // TODO: use bitband
if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 3) {
// TODO: implement - is this ever really needed
}
if (val & (1<<CPHA) && !(ctar & SPI_CTAR_CPHA)) {
ctar |= SPI_CTAR_CPHA;
// TODO: clear SPI_CTAR_CSSCK, set SPI_CTAR_ASC
}
update_ctar(ctar);
}
if (val & (1<<MSTR)) SPI1_MCR |= SPI_MCR_MSTR;
if (val & (1<<SPE)) {
SPI1_MCR &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
enable_pins();
}
//serial_print("MCR:");
//serial_phex32(SPI1_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI1_CTAR0);
//serial_print("\n");
return *this;
}
inline SPCR1emulation & operator &= (int val) __attribute__((always_inline)) {
//serial_print("SPCR &= ");
//serial_phex(val);
//serial_print("\n");
SIM_SCGC6 |= SIM_SCGC6_SPI1;
if (!(val & (1<<SPE))) {
SPI1_MCR |= (SPI_MCR_MDIS | SPI_MCR_HALT);
disable_pins();
}
if ((val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) != ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
uint32_t ctar = SPI1_CTAR0;
if (!(val & (1<<DORD))) ctar &= ~SPI_CTAR_LSBFE; // TODO: use bitband
if (!(val & (1<<CPOL))) ctar &= ~SPI_CTAR_CPOL;
if ((val & 3) == 0) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
}
if (!(val & (1<<CPHA)) && (ctar & SPI_CTAR_CPHA)) {
ctar &= ~SPI_CTAR_CPHA;
// TODO: set SPI_CTAR_ASC, clear SPI_CTAR_CSSCK
}
update_ctar(ctar);
}
if (!(val & (1<<MSTR))) SPI1_MCR &= ~SPI_MCR_MSTR;
return *this;
}
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
//serial_print("SPCR & ");
//serial_phex(val);
//serial_print(" MCR:");
//serial_phex32(SPI1_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI1_CTAR0);
//serial_print("\n");
//serial_print("\n");
SIM_SCGC6 |= SIM_SCGC6_SPI1;
if ((val & (1<<DORD)) && (SPI1_CTAR0 & SPI_CTAR_LSBFE)) ret |= (1<<DORD);
if ((val & (1<<CPOL)) && (SPI1_CTAR0 & SPI_CTAR_CPOL)) ret |= (1<<CPOL);
if ((val & (1<<CPHA)) && (SPI1_CTAR0 & SPI_CTAR_CPHA)) ret |= (1<<CPHA);
if ((val & 3) == 3) {
uint32_t dbr = SPI1_CTAR0 & 15;
if (dbr <= 1) {
} else if (dbr <= 4) {
ret |= (1<<SPR0);
} else if (dbr <= 6) {
ret |= (1<<SPR1);
} else {
ret |= (1<<SPR1)|(1<<SPR0);
}
} else if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
}
if (val & (1<<SPE) && (!(SPI1_MCR & SPI_MCR_MDIS))) ret |= (1<<SPE);
if (val & (1<<MSTR) && (SPI1_MCR & SPI_MCR_MSTR)) ret |= (1<<MSTR);
//serial_print("ret = ");
//serial_phex(ret);
//serial_print("\n");
return ret;
}
inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
// More options, so 2 bits
pinout &= ~3;
switch (pin) {
case 0: break;
case 21: pinout |= 1; break;
case 61: pinout |= 2; break;
case 59: pinout |= 3; break;
}
}
inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
// More options, so 2 bits
pinout &= ~0xc;
switch (pin) {
case 1: break;
case 5: pinout |= 0x4; break;
case 61: pinout |= 0x8; break;
case 59: pinout |= 0xc; break;
}
}
inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
// More options, so 2 bits
pinout &= ~0x30;
switch (pin) {
case 32: break;
case 20: pinout |= 0x10; break;
case 60: pinout |= 0x20; break;
}
}
inline void enable_pins(void) __attribute__((always_inline)) {
//serial_print("enable_pins\n");
// MOSI (SOUT)
switch (pinout & 0x3) {
case 0: CORE_PIN0_CONFIG = PORT_PCR_MUX(2); break;
case 1: CORE_PIN21_CONFIG = PORT_PCR_MUX(7); break;
case 2: CORE_PIN61_CONFIG = PORT_PCR_MUX(7); break;
case 3: CORE_PIN59_CONFIG = PORT_PCR_MUX(2); break;
}
// MISO (SIN)
switch (pinout & 0xc) {
case 0x0: CORE_PIN1_CONFIG = PORT_PCR_MUX(2); break;
case 0x4: CORE_PIN5_CONFIG = PORT_PCR_MUX(7); break;
case 0x8: CORE_PIN61_CONFIG = PORT_PCR_MUX(2); break;
case 0xc: CORE_PIN59_CONFIG = PORT_PCR_MUX(7); break;
}
// SCK
switch (pinout & 0x30) {
case 0x0: CORE_PIN32_CONFIG = PORT_PCR_MUX(2); break;
case 0x10: CORE_PIN20_CONFIG = PORT_PCR_MUX(7); break;
case 0x20: CORE_PIN60_CONFIG = PORT_PCR_MUX(2); break;
}
}
inline void disable_pins(void) __attribute__((always_inline)) {
switch (pinout & 0x3) {
case 0: CORE_PIN0_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 1: CORE_PIN21_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 2: CORE_PIN61_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 3: CORE_PIN59_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
}
switch (pinout & 0xc) {
case 0x0: CORE_PIN1_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 0x4: CORE_PIN5_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 0x8: CORE_PIN61_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 0xc: CORE_PIN59_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
}
switch (pinout & 0x30) {
case 0x0: CORE_PIN32_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 0x10: CORE_PIN20_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
case 0x20: CORE_PIN60_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
}
}
friend class SPIFIFO1class;
private:
static uint8_t pinout;
static inline void update_ctar(uint32_t ctar) __attribute__((always_inline)) {
if (SPI1_CTAR0 == ctar) return;
uint32_t mcr = SPI1_MCR;
if (mcr & SPI_MCR_MDIS) {
SPI1_CTAR0 = ctar;
} else {
SPI1_MCR = mcr | SPI_MCR_MDIS | SPI_MCR_HALT;
SPI1_CTAR0 = ctar;
SPI1_MCR = mcr;
}
}
};
extern SPCR1emulation SPCR1;
////////////////////
// SPI2
class SPCR2emulation
{
public:
inline SPCR2emulation & operator = (int val) __attribute__((always_inline)) {
uint32_t ctar, mcr, sim3;
//serial_print("SPCR=");
//serial_phex(val);
//serial_print("\n");
sim3 = SIM_SCGC3;
if (!(sim3 & SIM_SCGC3_SPI2)) {
//serial_print("init1\n");
SIM_SCGC3 = sim3 | SIM_SCGC3_SPI2;
SPI2_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
}
if (!(val & (1<<SPE))) {
SPI2_MCR |= SPI_MCR_MDIS; // TODO: use bitband for atomic access
}
ctar = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1);
if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE;
if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
if (val & (1<<CPHA)) {
ctar |= SPI_CTAR_CPHA;
if ((val & 3) == 0) {
ctar |= SPI_CTAR_BR(1) | SPI_CTAR_ASC(1);
} else if ((val & 3) == 1) {
ctar |= SPI_CTAR_BR(4) | SPI_CTAR_ASC(4);
} else if ((val & 3) == 2) {
ctar |= SPI_CTAR_BR(6) | SPI_CTAR_ASC(6);
} else {
ctar |= SPI_CTAR_BR(7) | SPI_CTAR_ASC(7);
}
} else {
if ((val & 3) == 0) {
ctar |= SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
} else if ((val & 3) == 1) {
ctar |= SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(4);
} else if ((val & 3) == 2) {
ctar |= SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(6);
} else {
ctar |= SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(7);
}
}
ctar |= (SPI2_CTAR0 & SPI_CTAR_DBR);
update_ctar(ctar);
mcr = SPI_MCR_DCONF(0) | SPI_MCR_PCSIS(0x1F);
if (val & (1<<MSTR)) mcr |= SPI_MCR_MSTR;
if (val & (1<<SPE)) {
mcr &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
SPI2_MCR = mcr;
enable_pins();
} else {
mcr |= (SPI_MCR_MDIS | SPI_MCR_HALT);
SPI2_MCR = mcr;
disable_pins();
}
//serial_print("MCR:");
//serial_phex32(SPI2_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI2_CTAR0);
//serial_print("\n");
return *this;
}
inline SPCR2emulation & operator |= (int val) __attribute__((always_inline)) {
uint32_t sim3;
//serial_print("SPCR |= ");
//serial_phex(val);
//serial_print("\n");
sim3 = SIM_SCGC3;
if (!(sim3 & SIM_SCGC3_SPI2)) {
//serial_print("init2\n");
SIM_SCGC6 = sim3 | SIM_SCGC3_SPI2;
SPI2_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1);
}
if (val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
uint32_t ctar = SPI2_CTAR0;
if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE; // TODO: use bitband
if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 3) {
// TODO: implement - is this ever really needed
}
if (val & (1<<CPHA) && !(ctar & SPI_CTAR_CPHA)) {
ctar |= SPI_CTAR_CPHA;
// TODO: clear SPI_CTAR_CSSCK, set SPI_CTAR_ASC
}
update_ctar(ctar);
}
if (val & (1<<MSTR)) SPI2_MCR |= SPI_MCR_MSTR;
if (val & (1<<SPE)) {
SPI2_MCR &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
enable_pins();
}
//serial_print("MCR:");
//serial_phex32(SPI2_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI2_CTAR0);
//serial_print("\n");
return *this;
}
inline SPCR2emulation & operator &= (int val) __attribute__((always_inline)) {
//serial_print("SPCR &= ");
//serial_phex(val);
//serial_print("\n");
SIM_SCGC3 |= SIM_SCGC3_SPI2;
if (!(val & (1<<SPE))) {
SPI2_MCR |= (SPI_MCR_MDIS | SPI_MCR_HALT);
disable_pins();
}
if ((val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) != ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
uint32_t ctar = SPI2_CTAR0;
if (!(val & (1<<DORD))) ctar &= ~SPI_CTAR_LSBFE; // TODO: use bitband
if (!(val & (1<<CPOL))) ctar &= ~SPI_CTAR_CPOL;
if ((val & 3) == 0) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
}
if (!(val & (1<<CPHA)) && (ctar & SPI_CTAR_CPHA)) {
ctar &= ~SPI_CTAR_CPHA;
// TODO: set SPI_CTAR_ASC, clear SPI_CTAR_CSSCK
}
update_ctar(ctar);
}
if (!(val & (1<<MSTR))) SPI2_MCR &= ~SPI_MCR_MSTR;
return *this;
}
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
//serial_print("SPCR & ");
//serial_phex(val);
//serial_print(" MCR:");
//serial_phex32(SPI2_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI2_CTAR0);
//serial_print("\n");
//serial_print("\n");
SIM_SCGC3 |= SIM_SCGC3_SPI2;
if ((val & (1<<DORD)) && (SPI2_CTAR0 & SPI_CTAR_LSBFE)) ret |= (1<<DORD);
if ((val & (1<<CPOL)) && (SPI2_CTAR0 & SPI_CTAR_CPOL)) ret |= (1<<CPOL);
if ((val & (1<<CPHA)) && (SPI2_CTAR0 & SPI_CTAR_CPHA)) ret |= (1<<CPHA);
if ((val & 3) == 3) {
uint32_t dbr = SPI2_CTAR0 & 15;
if (dbr <= 1) {
} else if (dbr <= 4) {
ret |= (1<<SPR0);
} else if (dbr <= 6) {
ret |= (1<<SPR1);
} else {
ret |= (1<<SPR1)|(1<<SPR0);
}
} else if ((val & 3) == 1) {
// TODO: implement - is this ever really needed
} else if ((val & 3) == 2) {
// TODO: implement - is this ever really needed
}
if (val & (1<<SPE) && (!(SPI2_MCR & SPI_MCR_MDIS))) ret |= (1<<SPE);
if (val & (1<<MSTR) && (SPI2_MCR & SPI_MCR_MSTR)) ret |= (1<<MSTR);
//serial_print("ret = ");
//serial_phex(ret);
//serial_print("\n");
return ret;
}
inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
if (pin == 44) pinout &= ~1;
if (pin == 52) pinout |= 1;
}
inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
if (pin == 45) pinout &= ~2;
if (pin == 51) pinout |= 2;
}
inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
if (pin == 46) pinout &= ~4;
if (pin == 53) pinout |= 4;
}
inline void enable_pins(void) __attribute__((always_inline)) {
//serial_print("enable_pins\n");
if ((pinout & 1) == 0) {
CORE_PIN44_CONFIG = PORT_PCR_MUX(2);
} else {
CORE_PIN52_CONFIG = PORT_PCR_MUX(2);
}
if ((pinout & 2) == 0) {
CORE_PIN45_CONFIG = PORT_PCR_MUX(2);
} else {
CORE_PIN51_CONFIG = PORT_PCR_MUX(2);
}
if ((pinout & 4) == 0) {
CORE_PIN46_CONFIG = PORT_PCR_MUX(2);
} else {
CORE_PIN53_CONFIG = PORT_PCR_MUX(2);
}
}
inline void disable_pins(void) __attribute__((always_inline)) {
//serial_print("disable_pins\n");
if ((pinout & 1) == 0) {
CORE_PIN44_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN52_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
if ((pinout & 2) == 0) {
CORE_PIN45_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN51_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
if ((pinout & 4) == 0) {
CORE_PIN46_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN53_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
}
friend class SPIFIFO1class;
private:
static uint8_t pinout;
static inline void update_ctar(uint32_t ctar) __attribute__((always_inline)) {
if (SPI2_CTAR0 == ctar) return;
uint32_t mcr = SPI2_MCR;
if (mcr & SPI_MCR_MDIS) {
SPI2_CTAR0 = ctar;
} else {
SPI2_MCR = mcr | SPI_MCR_MDIS | SPI_MCR_HALT;
SPI2_CTAR0 = ctar;
SPI2_MCR = mcr;
}
}
};
extern SPCR2emulation SPCR2;
#endif
class SPSRemulation
{
public:
inline SPSRemulation & operator = (int val) __attribute__((always_inline)) {
//serial_print("SPSR=");
//serial_phex(val);
//serial_print("\n");
uint32_t ctar = SPI0_CTAR0;
if (val & (1<<SPI2X)) {
ctar |= SPI_CTAR_DBR;
} else {
ctar &= ~SPI_CTAR_DBR;
}
SPCRemulation::update_ctar(ctar);
//serial_print("MCR:");
//serial_phex32(SPI0_MCR);
//serial_print(", CTAR0:");
//serial_phex32(SPI0_CTAR0);
//serial_print("\n");
return *this;
}
inline SPSRemulation & operator |= (int val) __attribute__((always_inline)) {
//serial_print("SPSR |= ");
//serial_phex(val);
//serial_print("\n");
if (val & (1<<SPI2X)) SPCRemulation::update_ctar(SPI0_CTAR0 |= SPI_CTAR_DBR);
return *this;
}
inline SPSRemulation & operator &= (int val) __attribute__((always_inline)) {
//serial_print("SPSR &= ");
//serial_phex(val);
//serial_print("\n");
if (!(val & (1<<SPI2X))) SPCRemulation::update_ctar(SPI0_CTAR0 &= ~SPI_CTAR_DBR);
return *this;
}
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
//serial_print("SPSR & ");
//serial_phex(val);
//serial_print("\n");
// TODO: using SPI_SR_TCF isn't quite right. Control returns to the
// caller after the final edge that captures data, which is 1/2 cycle
// sooner than AVR returns. At 500 kHz and slower SPI, this can make
// a difference when digitalWrite is used to manually control the CS
// pin, and perhaps it could matter at high clocks if faster register
// access is used? But does it really matter? Do any SPI chips in
// practice really perform differently if CS negates early, after the
// final bit is clocked, but before the end of the whole clock cycle?
if ((val & (1<<SPIF)) && (SPI0_SR & SPI_SR_TCF)) ret = (1<<SPIF);
if ((val & (1<<SPI2X)) && (SPI0_CTAR0 & SPI_CTAR_DBR)) ret |= (1<<SPI2X);
//delayMicroseconds(50000);
return ret;
}
operator int () const __attribute__((always_inline)) {
int ret = 0;
//serial_print("SPSR (int)\n");
if (SPI0_SR & SPI_SR_TCF) ret = (1<<SPIF);
if (SPI0_CTAR0 & SPI_CTAR_DBR) ret |= (1<<SPI2X);
return ret;
}
};
extern SPSRemulation SPSR;
class SPDRemulation
{
public:
inline SPDRemulation & operator = (int val) __attribute__((always_inline)) {
//serial_print("SPDR = ");
//serial_phex(val);
//serial_print("\n");
SPI0_MCR |= SPI_MCR_CLR_RXF; // discard any received data
SPI0_SR = SPI_SR_TCF;
//SPI0_SR = SPI_SR_EOQF;
//SPI0_PUSHR = (val & 255) | SPI0_PUSHR_EOQ;
SPI0_PUSHR = (val & 255);
return *this;
}
operator int () const __attribute__((always_inline)) {
uint32_t val;
val = SPI0_POPR & 255;
//serial_print("SPDR (int) ");
//serial_phex(val);
//serial_print("\n");
return val;
}
};
extern SPDRemulation SPDR;
#elif defined(KINETISL)
// SPI Control Register SPCR
//#define SPIE 7 // SPI Interrupt Enable - not supported
//#define SPE 6 // SPI Enable
//#define DORD 5 // DORD: Data Order
//#define MSTR 4 // MSTR: Master/Slave Select
//#define CPOL 3 // CPOL: Clock Polarity
//#define CPHA 2 // CPHA: Clock Phase
//#define SPR1 1 // Clock: 3 = 125 kHz, 2 = 250 kHz, 1 = 1 MHz, 0->4 MHz
//#define SPR0 0
// SPI Status Register SPSR
//#define SPIF 7 // SPIF: SPI Interrupt Flag
//#define WCOL 6 // WCOL: Write COLlision Flag - not implemented
//#define SPI2X 0 // SPI2X: Double SPI Speed Bit
// SPI Data Register SPDR
class SPCRemulation
{
public:
inline SPCRemulation & operator = (int val) __attribute__((always_inline)) {
uint32_t sim4 = SIM_SCGC4;
if (!(sim4 & SIM_SCGC4_SPI0)) {
SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
}
uint32_t c1 = 0;
if (val & (1<<DORD)) c1 |= SPI_C1_LSBFE;
if (val & (1<<CPOL)) c1 |= SPI_C1_CPOL;
if (val & (1<<CPHA)) c1 |= SPI_C1_CPHA;
if (val & (1<<MSTR)) c1 |= SPI_C1_MSTR;
if (val & (1<<SPE)) c1 |= SPI_C1_SPE;
SPI0_C1 = c1;
SPI0_C2 = 0;
uint32_t br = SPI0_BR & 0x10;
switch (val & 3) {
case 0: SPI0_BR = br | SPI_BR_SPR(0); break;
case 1: SPI0_BR = br | SPI_BR_SPR(2); break;
case 2: SPI0_BR = br | SPI_BR_SPR(4); break;
default: SPI0_BR = br | SPI_BR_SPR(5); break;
}
if (val & (1<<SPE)) enable_pins();
else disable_pins();
return *this;
}
inline SPCRemulation & operator |= (int val) __attribute__((always_inline)) {
uint32_t sim4 = SIM_SCGC4;
if (!(sim4 & SIM_SCGC4_SPI0)) {
SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
}
uint32_t c1 = SPI0_C1;
if (val & (1<<DORD)) c1 |= SPI_C1_LSBFE;
if (val & (1<<CPOL)) c1 |= SPI_C1_CPOL;
if (val & (1<<CPHA)) c1 |= SPI_C1_CPHA;
if (val & (1<<MSTR)) c1 |= SPI_C1_MSTR;
if (val & (1<<SPE)) {
enable_pins();
c1 |= SPI_C1_SPE;
}
SPI0_C1 = c1;
SPI0_C2 = 0;
val &= 3;
if (val) {
uint32_t br = SPI0_BR;
uint32_t bits = baud2avr(br) | val;
br &= 0x10;
switch (bits) {
case 0: SPI0_BR = br | SPI_BR_SPR(0); break;
case 1: SPI0_BR = br | SPI_BR_SPR(2); break;
case 2: SPI0_BR = br | SPI_BR_SPR(4); break;
default: SPI0_BR = br | SPI_BR_SPR(5); break;
}
}
return *this;
}
inline SPCRemulation & operator &= (int val) __attribute__((always_inline)) {
uint32_t sim4 = SIM_SCGC4;
if (!(sim4 & SIM_SCGC4_SPI0)) {
SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
}
uint32_t c1 = SPI0_C1;
if (!(val & (1<<DORD))) c1 &= ~SPI_C1_LSBFE;
if (!(val & (1<<CPOL))) c1 &= ~SPI_C1_CPOL;
if (!(val & (1<<CPHA))) c1 &= ~SPI_C1_CPHA;
if (!(val & (1<<MSTR))) c1 &= ~SPI_C1_MSTR;
if (!(val & (1<<SPE))) {
disable_pins();
c1 &= ~SPI_C1_SPE;
}
SPI0_C1 = c1;
SPI0_C2 = 0;
val &= 3;
if (val < 3) {
uint32_t br = SPI0_BR;
uint32_t bits = baud2avr(br) & val;
br &= 0x10;
switch (bits) {
case 0: SPI0_BR = br | SPI_BR_SPR(0); break;
case 1: SPI0_BR = br | SPI_BR_SPR(2); break;
case 2: SPI0_BR = br | SPI_BR_SPR(4); break;
default: SPI0_BR = br | SPI_BR_SPR(5); break;
}
}
return *this;
}
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
uint32_t sim4 = SIM_SCGC4;
if (!(sim4 & SIM_SCGC4_SPI0)) {
SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
}
uint32_t c1 = SPI0_C1;
if ((val & (1<<DORD)) && (c1 & SPI_C1_LSBFE)) ret |= (1<<DORD);
if ((val & (1<<CPOL)) && (c1 & SPI_C1_CPOL)) ret |= (1<<CPOL);
if ((val & (1<<CPHA)) && (c1 & SPI_C1_CPHA)) ret |= (1<<CPHA);
if ((val & (1<<MSTR)) && (c1 & SPI_C1_MSTR)) ret |= (1<<MSTR);
if ((val & (1<<SPE)) && (c1 & SPI_C1_SPE)) ret |= (1<<SPE);
uint32_t bits = baud2avr(SPI0_BR);
if ((val & (1<<SPR1)) && (bits & (1<<SPR1))) ret |= (1<<SPR1);
if ((val & (1<<SPR0)) && (bits & (1<<SPR0))) ret |= (1<<SPR0);
return ret;
}
operator int () const __attribute__((always_inline)) {
int ret = 0;
uint32_t sim4 = SIM_SCGC4;
if (!(sim4 & SIM_SCGC4_SPI0)) {
SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
}
uint32_t c1 = SPI0_C1;
if ((c1 & SPI_C1_LSBFE)) ret |= (1<<DORD);
if ((c1 & SPI_C1_CPOL)) ret |= (1<<CPOL);
if ((c1 & SPI_C1_CPHA)) ret |= (1<<CPHA);
if ((c1 & SPI_C1_MSTR)) ret |= (1<<MSTR);
if ((c1 & SPI_C1_SPE)) ret |= (1<<SPE);
ret |= baud2avr(SPI0_BR);
return ret;
}
inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
uint8_t newpinout = pinout;
if (pin == 11) newpinout &= ~1;
if (pin == 7) newpinout |= 1;
if ((SIM_SCGC4 & SIM_SCGC4_SPI0) && newpinout != pinout) {
if ((newpinout & 1) == 0) {
CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
} else {
CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN7_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
}
inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
uint8_t newpinout = pinout;
if (pin == 12) newpinout &= ~2;
if (pin == 8) newpinout |= 2;
if ((SIM_SCGC4 & SIM_SCGC4_SPI0) && newpinout != pinout) {
if ((newpinout & 2) == 0) {
CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN12_CONFIG = PORT_PCR_MUX(2);
} else {
CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN8_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
}
inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
uint8_t newpinout = pinout;
if (pin == 13) newpinout &= ~4;
if (pin == 14) newpinout |= 4;
if ((SIM_SCGC4 & SIM_SCGC4_SPI0) && newpinout != pinout) {
if ((newpinout & 4) == 0) {
CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
} else {
CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
CORE_PIN14_CONFIG = PORT_PCR_MUX(2);
}
}
pinout = newpinout;
}
friend class SPSRemulation;
friend class SPIFIFOclass;
private:
static inline uint32_t baud2avr(uint32_t br) __attribute__((always_inline)) {
br &= 15;
if (br == 0) return 0;
if (br <= 2) return 1;
if (br <= 4) return 2;
return 3;
}
static uint8_t pinout;
public:
inline void enable_pins(void) __attribute__((always_inline)) {
//serial_print("enable_pins\n");
if ((pinout & 1) == 0) {
CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // MOSI0 = 11 (PTC6)
} else {
CORE_PIN7_CONFIG = PORT_PCR_MUX(2); // MOSI0 = 7 (PTD2)
}
if ((pinout & 2) == 0) {
CORE_PIN12_CONFIG = PORT_PCR_MUX(2); // MISO0 = 12 (PTC7)
} else {
CORE_PIN8_CONFIG = PORT_PCR_MUX(2); // MISO0 = 8 (PTD3)
}
if ((pinout & 4) == 0) {
CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // SCK0 = 13 (PTC5)
} else {
CORE_PIN14_CONFIG = PORT_PCR_MUX(2); // SCK0 = 14 (PTD1)
}
}
inline void disable_pins(void) __attribute__((always_inline)) {
//serial_print("disable_pins\n");
if ((pinout & 1) == 0) {
CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
if ((pinout & 2) == 0) {
CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
if ((pinout & 4) == 0) {
CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
}
};
extern SPCRemulation SPCR;
class SPCR1emulation
{
public:
inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
if (pin == 0) pinout &= ~1; // MOSI1 = 0 (PTB16)
if (pin == 21) pinout |= 1; // MOSI1 = 21 (PTD6)
}
inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
if (pin == 1) pinout &= ~2; // MISO1 = 1 (PTB17)
if (pin == 5) pinout |= 2; // MISO1 = 5 (PTD7)
}
inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
// SCK1 = 20 (PTD5) - no alternative pin
}
inline void enable_pins(void) __attribute__((always_inline)) {
//serial_print("enable_pins\n");
if ((pinout & 1) == 0) {
CORE_PIN0_CONFIG = PORT_PCR_MUX(2); // MOSI1 = 0 (PTB16)
} else {
CORE_PIN21_CONFIG = PORT_PCR_MUX(2); // MOSI1 = 21 (PTD6)
}
if ((pinout & 2) == 0) {
CORE_PIN1_CONFIG = PORT_PCR_MUX(2); // MISO1 = 1 (PTB17)
} else {
CORE_PIN5_CONFIG = PORT_PCR_MUX(2); // MISO1 = 5 (PTD7)
}
CORE_PIN20_CONFIG = PORT_PCR_MUX(2); // SCK1 = 20 (PTD5)
}
inline void disable_pins(void) __attribute__((always_inline)) {
//serial_print("disable_pins\n");
if ((pinout & 1) == 0) {
CORE_PIN0_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN21_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
if ((pinout & 2) == 0) {
CORE_PIN1_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
} else {
CORE_PIN5_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
CORE_PIN20_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
}
friend class SPIFIFO1class;
private:
static uint8_t pinout;
};
extern SPCR1emulation SPCR1;
class SPSRemulation
{
public:
inline SPSRemulation & operator = (int val) __attribute__((always_inline)) {
if (val & (1<<SPI2X)) {
SPI0_BR &= ~0x10;
} else {
SPI0_BR |= 0x10;
}
return *this;
}
inline SPSRemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & (1<<SPI2X)) SPI0_BR &= ~0x10;
return *this;
}
inline SPSRemulation & operator &= (int val) __attribute__((always_inline)) {
if (!(val & (1<<SPI2X))) SPI0_BR |= 0x10;
return *this;
}
inline int operator & (int val) const __attribute__((always_inline)) {
int ret = 0;
if ((val & (1<<SPIF)) && (SPI0_S & SPI_S_SPRF)) ret = (1<<SPIF);
if ((val & (1<<SPI2X)) && (!(SPI0_BR & 0x10))) ret |= (1<<SPI2X);
return ret;
}
operator int () const __attribute__((always_inline)) {
int ret = 0;
if ((SPI0_S & SPI_S_SPRF)) ret = (1<<SPIF);
if (!(SPI0_BR & 0x10)) ret |= (1<<SPI2X);
return ret;
}
};
extern SPSRemulation SPSR;
class SPDRemulation
{
public:
inline SPDRemulation & operator = (int val) __attribute__((always_inline)) {
if ((SPI0_S & SPI_S_SPTEF)) {
uint32_t tmp __attribute__((unused)) = SPI0_DL;
}
SPI0_DL = val;
return *this;
}
operator int () const __attribute__((always_inline)) {
return SPI0_DL & 255;
}
};
extern SPDRemulation SPDR;
#endif // KINETISK
class SREGemulation
{
public:
operator int () const __attribute__((always_inline)) {
uint32_t primask;
asm volatile("mrs %0, primask\n" : "=r" (primask)::);
if (primask) return 0;
return (1<<7);
}
inline SREGemulation & operator = (int val) __attribute__((always_inline)) {
if (val & (1<<7)) {
__enable_irq();
} else {
__disable_irq();
}
return *this;
}
};
extern SREGemulation SREG;
// 22211
// 84062840
// 322111
// 17395173
#if defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
#if defined(__MK20DX128__) || defined(__MK20DX256__)
#define EIMSK_pA 0x01000018 // pins 3, 4, 24
#define EIMSK_pB 0x020F0003 // pins 0, 1, 16-19, 25
#define EIMSK_pC 0x78C0BE00 // pins 9-13, 15, 22, 23, 27-30
#define EIMSK_pD 0x003041E4 // pins 2, 5-8, 14, 20, 21
#define EIMSK_pE 0x84000000 // pins 26, 31
#elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
#define EIMSK_pA 0x1E000018 // pins 3, 4, 25-28
#define EIMSK_pB 0xE00F0003 // pins 0, 1, 16-19, 29-31
#define EIMSK_pC 0x00C0BE00 // pins 9-13, 15, 22, 23
#define EIMSK_pD 0x003041E4 // pins 2, 5-8, 14, 20, 21
#define EIMSK_pE 0x01000000 // pins 24
#endif
class EIMSKemulation // used by Adafruit_nRF8001 (only supports INT for pins 0 to 31)
{
public:
operator int () const __attribute__((always_inline)) {
int mask = 0;
volatile const uint32_t *icer = &NVIC_ICER0;
if (icer[IRQ_PORTA >> 5] & (1 << (IRQ_PORTA & 31))) mask |= EIMSK_pA;
if (icer[IRQ_PORTB >> 5] & (1 << (IRQ_PORTB & 31))) mask |= EIMSK_pB;
if (icer[IRQ_PORTC >> 5] & (1 << (IRQ_PORTC & 31))) mask |= EIMSK_pC;
if (icer[IRQ_PORTD >> 5] & (1 << (IRQ_PORTD & 31))) mask |= EIMSK_pD;
if (icer[IRQ_PORTE >> 5] & (1 << (IRQ_PORTE & 31))) mask |= EIMSK_pE;
return mask;
}
inline EIMSKemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & EIMSK_pA) NVIC_ENABLE_IRQ(IRQ_PORTA);
if (val & EIMSK_pB) NVIC_ENABLE_IRQ(IRQ_PORTB);
if (val & EIMSK_pC) NVIC_ENABLE_IRQ(IRQ_PORTC);
if (val & EIMSK_pD) NVIC_ENABLE_IRQ(IRQ_PORTD);
if (val & EIMSK_pE) NVIC_ENABLE_IRQ(IRQ_PORTE);
return *this;
}
inline EIMSKemulation & operator &= (int val) __attribute__((always_inline)) {
uint32_t n = val;
if ((n | ~EIMSK_pA) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTA);
if ((n | ~EIMSK_pB) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTB);
if ((n | ~EIMSK_pC) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTC);
if ((n | ~EIMSK_pD) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTD);
if ((n | ~EIMSK_pE) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTE);
return *this;
}
};
extern EIMSKemulation EIMSK;
#elif defined(__MKL26Z64__)
#define EIMSK_pA 0x00000018 // pins 3, 4, 24
#define EIMSK_pC 0x00C0BE00 // pins 9-13, 15, 22, 23
#define EIMSK_pD 0x003041E4 // pins 2, 5-8, 14, 20, 21
class EIMSKemulation // used by Adafruit_nRF8001
{
public:
operator int () const __attribute__((always_inline)) {
int mask = 0;
volatile const uint32_t *icer = &NVIC_ICER0;
if (icer[IRQ_PORTA >> 5] & (1 << (IRQ_PORTA & 31))) mask |= EIMSK_pA;
if (icer[IRQ_PORTCD >> 5] & (1 << (IRQ_PORTCD & 31))) mask |= (EIMSK_pC | EIMSK_pD);
return mask;
}
inline EIMSKemulation & operator |= (int val) __attribute__((always_inline)) {
if (val & EIMSK_pA) NVIC_ENABLE_IRQ(IRQ_PORTA);
if (val & (EIMSK_pC | EIMSK_pD)) NVIC_ENABLE_IRQ(IRQ_PORTCD);
return *this;
}
inline EIMSKemulation & operator &= (int val) __attribute__((always_inline)) {
uint32_t n = val;
if ((n | ~EIMSK_pA) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTA);
if ((n | ~(EIMSK_pC | EIMSK_pD)) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTCD);
return *this;
}
};
extern EIMSKemulation EIMSK;
#endif
// these are not intended for public consumption...
#undef GPIO_BITBAND_ADDR
#undef CONFIG_PULLUP
#undef CONFIG_NOPULLUP
#undef GPIO_SETBIT_ATOMIC
#undef GPIO_CLRBIT_ATOMIC
#endif // __cplusplus
#endif