teensy-core-4.1/teensy3/avr_emulation.h

/* Teensyduino Core Library
 * http://www.pjrc.com/teensy/
 * Copyright (c) 2017 PJRC.COM, LLC.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * 1. The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * 2. If the Software is incorporated into a build system that allows
 * selection among a list of target devices, then similar target
 * devices manufactured by PJRC.COM must be included in the list of
 * target devices and selectable in the same manner.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#ifndef _avr_emulation_h_
#define _avr_emulation_h_

#include "kinetis.h"
#include "core_pins.h"
#include "pins_arduino.h"

#ifdef __cplusplus

#define GPIO_BITBAND_ADDR(reg, bit) (((uint32_t)&(reg) - 0x40000000) * 32 + (bit) * 4 + 0x42000000)
#define CONFIG_PULLUP (PORT_PCR_MUX(1) | PORT_PCR_PE | PORT_PCR_PS)
#define CONFIG_NOPULLUP (PORT_PCR_MUX(1))

#if defined(KINETISK)
// bitband addressing for atomic access to data direction register
#define GPIO_SETBIT_ATOMIC(reg, bit) (*(uint32_t *)GPIO_BITBAND_ADDR((reg), (bit)) = 1)
#define GPIO_CLRBIT_ATOMIC(reg, bit) (*(uint32_t *)GPIO_BITBAND_ADDR((reg), (bit)) = 0)
#elif defined(KINETISL)
// bit manipulation engine for atomic access to data direction register
#define GPIO_SETBIT_ATOMIC(reg, bit) (*(uint32_t *)(((uint32_t)&(reg) - 0xF8000000) | 0x480FF000) = 1 << (bit))
#define GPIO_CLRBIT_ATOMIC(reg, bit) (*(uint32_t *)(((uint32_t)&(reg) - 0xF8000000) | 0x440FF000) = ~(1 << (bit)))
#endif


class PORTDemulation
{
public:
	inline PORTDemulation & operator = (int val) __attribute__((always_inline)) {
		digitalWriteFast(0, (val & (1<<0)));
		if (!(CORE_PIN0_DDRREG & CORE_PIN0_BIT))
			CORE_PIN0_CONFIG = ((val & (1<<0)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(1, (val & (1<<1)));
		if (!(CORE_PIN1_DDRREG & CORE_PIN1_BIT))
			CORE_PIN1_CONFIG = ((val & (1<<1)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(2, (val & (1<<2)));
		if (!(CORE_PIN2_DDRREG & CORE_PIN2_BIT))
			CORE_PIN2_CONFIG = ((val & (1<<2)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(3, (val & (1<<3)));
		if (!(CORE_PIN3_DDRREG & CORE_PIN3_BIT))
			CORE_PIN3_CONFIG = ((val & (1<<3)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(4, (val & (1<<4)));
		if (!(CORE_PIN4_DDRREG & CORE_PIN4_BIT))
			CORE_PIN4_CONFIG = ((val & (1<<4)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(5, (val & (1<<5)));
		if (!(CORE_PIN5_DDRREG & CORE_PIN5_BIT))
			CORE_PIN5_CONFIG = ((val & (1<<5)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(6, (val & (1<<6)));
		if (!(CORE_PIN6_DDRREG & CORE_PIN6_BIT))
			CORE_PIN6_CONFIG = ((val & (1<<6)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(7, (val & (1<<7)));
		if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT))
			CORE_PIN7_CONFIG = ((val & (1<<7)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		return *this;
	}
	inline PORTDemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) {
			digitalWriteFast(0, HIGH);
			if (!(CORE_PIN0_DDRREG & CORE_PIN0_BIT)) CORE_PIN0_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<1)) {
			digitalWriteFast(1, HIGH);
			if (!(CORE_PIN1_DDRREG & CORE_PIN1_BIT)) CORE_PIN1_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<2)) {
			digitalWriteFast(2, HIGH);
			if (!(CORE_PIN2_DDRREG & CORE_PIN2_BIT)) CORE_PIN2_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<3)) {
			digitalWriteFast(3, HIGH);
			if (!(CORE_PIN3_DDRREG & CORE_PIN3_BIT)) CORE_PIN3_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<4)) {
			digitalWriteFast(4, HIGH);
			if (!(CORE_PIN4_DDRREG & CORE_PIN4_BIT)) CORE_PIN4_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<5)) {
			digitalWriteFast(5, HIGH);
			if (!(CORE_PIN5_DDRREG & CORE_PIN5_BIT)) CORE_PIN5_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<6)) {
			digitalWriteFast(6, HIGH);
			if (!(CORE_PIN6_DDRREG & CORE_PIN6_BIT)) CORE_PIN6_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<7)) {
			digitalWriteFast(7, HIGH);
			if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN7_CONFIG = CONFIG_PULLUP;
		}
		return *this;
	}
	inline PORTDemulation & operator &= (int val) __attribute__((always_inline)) {
		if (!(val & (1<<0))) {
			digitalWriteFast(0, LOW);
			if (!(CORE_PIN0_DDRREG & CORE_PIN0_BIT)) CORE_PIN0_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<1))) {
			digitalWriteFast(1, LOW);
			if (!(CORE_PIN1_DDRREG & CORE_PIN1_BIT)) CORE_PIN1_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<2))) {
			digitalWriteFast(2, LOW);
			if (!(CORE_PIN2_DDRREG & CORE_PIN2_BIT)) CORE_PIN2_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<3))) {
			digitalWriteFast(3, LOW);
			if (!(CORE_PIN3_DDRREG & CORE_PIN3_BIT)) CORE_PIN3_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<4))) {
			digitalWriteFast(4, LOW);
			if (!(CORE_PIN4_DDRREG & CORE_PIN4_BIT)) CORE_PIN4_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<5))) {
			digitalWriteFast(5, LOW);
			if (!(CORE_PIN5_DDRREG & CORE_PIN5_BIT)) CORE_PIN5_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<6))) {
			digitalWriteFast(6, LOW);
			if (!(CORE_PIN6_DDRREG & CORE_PIN6_BIT)) CORE_PIN6_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<7))) {
			digitalWriteFast(7, LOW);
			if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN7_CONFIG = CONFIG_NOPULLUP;
		}
		return *this;
	}
};
extern PORTDemulation PORTD;

class PINDemulation
{
public:
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		if ((val & (1<<0)) && digitalReadFast(0)) ret |= (1<<0);
		if ((val & (1<<1)) && digitalReadFast(1)) ret |= (1<<1);
		if ((val & (1<<2)) && digitalReadFast(2)) ret |= (1<<2);
		if ((val & (1<<3)) && digitalReadFast(3)) ret |= (1<<3);
		if ((val & (1<<4)) && digitalReadFast(4)) ret |= (1<<4);
		if ((val & (1<<5)) && digitalReadFast(5)) ret |= (1<<5);
		if ((val & (1<<6)) && digitalReadFast(6)) ret |= (1<<6);
		if ((val & (1<<7)) && digitalReadFast(7)) ret |= (1<<7);
		return ret;
	}
	operator int () const __attribute__((always_inline)) {
		int ret = 0;
		if (digitalReadFast(0)) ret |= (1<<0);
		if (digitalReadFast(1)) ret |= (1<<1);
		if (digitalReadFast(2)) ret |= (1<<2);
		if (digitalReadFast(3)) ret |= (1<<3);
		if (digitalReadFast(4)) ret |= (1<<4);
		if (digitalReadFast(5)) ret |= (1<<5);
		if (digitalReadFast(6)) ret |= (1<<6);
		if (digitalReadFast(7)) ret |= (1<<7);
		return ret;
	}
};
extern PINDemulation PIND;

class DDRDemulation
{
public:
	inline DDRDemulation & operator = (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) set0(); else clr0();
		if (val & (1<<1)) set1(); else clr1();
		if (val & (1<<2)) set2(); else clr2();
		if (val & (1<<3)) set3(); else clr3();
		if (val & (1<<4)) set4(); else clr4();
		if (val & (1<<5)) set5(); else clr5();
		if (val & (1<<6)) set6(); else clr6();
		if (val & (1<<7)) set7(); else clr7();
		return *this;
	}
	inline DDRDemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) set0();
		if (val & (1<<1)) set1();
		if (val & (1<<2)) set2();
		if (val & (1<<3)) set3();
		if (val & (1<<4)) set4();
		if (val & (1<<5)) set5();
		if (val & (1<<6)) set6();
		if (val & (1<<7)) set7();
		return *this;
	}
	inline DDRDemulation & operator &= (int val) __attribute__((always_inline)) {
		if (!(val & (1<<0))) clr0();
		if (!(val & (1<<1))) clr1();
		if (!(val & (1<<2))) clr2();
		if (!(val & (1<<3))) clr3();
		if (!(val & (1<<4))) clr4();
		if (!(val & (1<<5))) clr5();
		if (!(val & (1<<6))) clr6();
		if (!(val & (1<<7))) clr7();
		return *this;
	}
private:
	inline void set0() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN0_DDRREG, CORE_PIN0_BIT);
		CORE_PIN0_CONFIG = CONFIG_PULLUP;
	}
	inline void set1() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN1_DDRREG, CORE_PIN1_BIT);
		CORE_PIN1_CONFIG = CONFIG_PULLUP;
	}
	inline void set2() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN2_DDRREG, CORE_PIN2_BIT);
		CORE_PIN2_CONFIG = CONFIG_PULLUP;
	}
	inline void set3() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN3_DDRREG, CORE_PIN3_BIT);
		CORE_PIN3_CONFIG = CONFIG_PULLUP;
	}
	inline void set4() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN4_DDRREG, CORE_PIN4_BIT);
		CORE_PIN4_CONFIG = CONFIG_PULLUP;
	}
	inline void set5() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN5_DDRREG, CORE_PIN5_BIT);
		CORE_PIN5_CONFIG = CONFIG_PULLUP;
	}
	inline void set6() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN6_DDRREG, CORE_PIN6_BIT);
		CORE_PIN6_CONFIG = CONFIG_PULLUP;
	}
	inline void set7() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN7_DDRREG, CORE_PIN7_BIT);
		CORE_PIN7_CONFIG = CONFIG_PULLUP;
	}
	inline void clr0() __attribute__((always_inline)) {
		CORE_PIN0_CONFIG = ((CORE_PIN0_PORTREG & CORE_PIN0_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN0_DDRREG, CORE_PIN0_BIT);
	}
	inline void clr1() __attribute__((always_inline)) {
		CORE_PIN1_CONFIG = ((CORE_PIN1_PORTREG & CORE_PIN1_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN1_DDRREG, CORE_PIN1_BIT);
	}
	inline void clr2() __attribute__((always_inline)) {
		CORE_PIN2_CONFIG = ((CORE_PIN2_PORTREG & CORE_PIN2_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN2_DDRREG, CORE_PIN2_BIT);
	}
	inline void clr3() __attribute__((always_inline)) {
		CORE_PIN3_CONFIG = ((CORE_PIN3_PORTREG & CORE_PIN3_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN3_DDRREG, CORE_PIN3_BIT);
	}
	inline void clr4() __attribute__((always_inline)) {
		CORE_PIN4_CONFIG = ((CORE_PIN4_PORTREG & CORE_PIN4_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN4_DDRREG, CORE_PIN4_BIT);
	}
	inline void clr5() __attribute__((always_inline)) {
		CORE_PIN5_CONFIG = ((CORE_PIN5_PORTREG & CORE_PIN5_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN5_DDRREG, CORE_PIN5_BIT);
	}
	inline void clr6() __attribute__((always_inline)) {
		CORE_PIN6_CONFIG = ((CORE_PIN6_PORTREG & CORE_PIN6_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN6_DDRREG, CORE_PIN6_BIT);
	}
	inline void clr7() __attribute__((always_inline)) {
		CORE_PIN7_CONFIG = ((CORE_PIN7_PORTREG & CORE_PIN7_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN7_DDRREG, CORE_PIN7_BIT);
	}
};

extern DDRDemulation DDRD;






class PORTBemulation
{
public:
	inline PORTBemulation & operator = (int val) __attribute__((always_inline)) {
		digitalWriteFast(8, (val & (1<<0)));
		if (!(CORE_PIN8_DDRREG & CORE_PIN8_BIT))
			CORE_PIN8_CONFIG = ((val & (1<<0)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(9, (val & (1<<1)));
		if (!(CORE_PIN9_DDRREG & CORE_PIN9_BIT))
			CORE_PIN9_CONFIG = ((val & (1<<1)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(10, (val & (1<<2)));
		if (!(CORE_PIN10_DDRREG & CORE_PIN10_BIT))
			CORE_PIN10_CONFIG = ((val & (1<<2)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(11, (val & (1<<3)));
		if (!(CORE_PIN11_DDRREG & CORE_PIN11_BIT))
			CORE_PIN11_CONFIG = ((val & (1<<3)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(12, (val & (1<<4)));
		if (!(CORE_PIN12_DDRREG & CORE_PIN12_BIT))
			CORE_PIN12_CONFIG = ((val & (1<<4)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(13, (val & (1<<5)));
		if (!(CORE_PIN13_DDRREG & CORE_PIN13_BIT))
			CORE_PIN13_CONFIG = ((val & (1<<5)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		return *this;
	}
	inline PORTBemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) {
			digitalWriteFast(8, HIGH);
			if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN8_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<1)) {
			digitalWriteFast(9, HIGH);
			if (!(CORE_PIN7_DDRREG & CORE_PIN7_BIT)) CORE_PIN9_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<2)) {
			digitalWriteFast(10, HIGH);
			if (!(CORE_PIN10_DDRREG & CORE_PIN10_BIT)) CORE_PIN10_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<3)) {
			digitalWriteFast(11, HIGH);
			if (!(CORE_PIN11_DDRREG & CORE_PIN11_BIT)) CORE_PIN11_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<4)) {
			digitalWriteFast(12, HIGH);
			if (!(CORE_PIN12_DDRREG & CORE_PIN12_BIT)) CORE_PIN12_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<5)) {
			digitalWriteFast(13, HIGH);
			if (!(CORE_PIN13_DDRREG & CORE_PIN13_BIT)) CORE_PIN13_CONFIG = CONFIG_PULLUP;
		}
		return *this;
	}
	inline PORTBemulation & operator &= (int val) __attribute__((always_inline)) {
		if (!(val & (1<<0))) {
			digitalWriteFast(8, LOW);
			if (!(CORE_PIN8_DDRREG & CORE_PIN8_BIT)) CORE_PIN8_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<1))) {
			digitalWriteFast(9, LOW);
			if (!(CORE_PIN9_DDRREG & CORE_PIN9_BIT)) CORE_PIN9_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<2))) {
			digitalWriteFast(10, LOW);
			if (!(CORE_PIN10_DDRREG & CORE_PIN10_BIT)) CORE_PIN10_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<3))) {
			digitalWriteFast(11, LOW);
			if (!(CORE_PIN11_DDRREG & CORE_PIN11_BIT)) CORE_PIN11_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<4))) {
			digitalWriteFast(12, LOW);
			if (!(CORE_PIN12_DDRREG & CORE_PIN12_BIT)) CORE_PIN12_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<5))) {
			digitalWriteFast(13, LOW);
			if (!(CORE_PIN13_DDRREG & CORE_PIN13_BIT)) CORE_PIN13_CONFIG = CONFIG_NOPULLUP;
		}
		return *this;
	}
};
extern PORTBemulation PORTB;

class PINBemulation
{
public:
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		if ((val & (1<<0)) && digitalReadFast(8)) ret |= (1<<0);
		if ((val & (1<<1)) && digitalReadFast(9)) ret |= (1<<1);
		if ((val & (1<<2)) && digitalReadFast(10)) ret |= (1<<2);
		if ((val & (1<<3)) && digitalReadFast(11)) ret |= (1<<3);
		if ((val & (1<<4)) && digitalReadFast(12)) ret |= (1<<4);
		if ((val & (1<<5)) && digitalReadFast(13)) ret |= (1<<5);
		return ret;
	}
	operator int () const __attribute__((always_inline)) {
		int ret = 0;
		if (digitalReadFast(8)) ret |= (1<<0);
		if (digitalReadFast(9)) ret |= (1<<1);
		if (digitalReadFast(10)) ret |= (1<<2);
		if (digitalReadFast(11)) ret |= (1<<3);
		if (digitalReadFast(12)) ret |= (1<<4);
		if (digitalReadFast(13)) ret |= (1<<5);
		return ret;
	}
};
extern PINBemulation PINB;

class DDRBemulation
{
public:
	inline DDRBemulation & operator = (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) set0(); else clr0();
		if (val & (1<<1)) set1(); else clr1();
		if (val & (1<<2)) set2(); else clr2();
		if (val & (1<<3)) set3(); else clr3();
		if (val & (1<<4)) set4(); else clr4();
		if (val & (1<<5)) set5(); else clr5();
		return *this;
	}
	inline DDRBemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) set0();
		if (val & (1<<1)) set1();
		if (val & (1<<2)) set2();
		if (val & (1<<3)) set3();
		if (val & (1<<4)) set4();
		if (val & (1<<5)) set5();
		return *this;
	}
	inline DDRBemulation & operator &= (int val) __attribute__((always_inline)) {
		if (!(val & (1<<0))) clr0();
		if (!(val & (1<<1))) clr1();
		if (!(val & (1<<2))) clr2();
		if (!(val & (1<<3))) clr3();
		if (!(val & (1<<4))) clr4();
		if (!(val & (1<<5))) clr5();
		return *this;
	}
private:
	inline void set0() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN8_DDRREG, CORE_PIN8_BIT);
		CORE_PIN8_CONFIG = CONFIG_PULLUP;
	}
	inline void set1() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN9_DDRREG, CORE_PIN9_BIT);
		CORE_PIN9_CONFIG = CONFIG_PULLUP;
	}
	inline void set2() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN10_DDRREG, CORE_PIN10_BIT);
		CORE_PIN10_CONFIG = CONFIG_PULLUP;
	}
	inline void set3() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN11_DDRREG, CORE_PIN11_BIT);
		CORE_PIN11_CONFIG = CONFIG_PULLUP;
	}
	inline void set4() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN12_DDRREG, CORE_PIN12_BIT);
		CORE_PIN12_CONFIG = CONFIG_PULLUP;
	}
	inline void set5() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN13_DDRREG, CORE_PIN13_BIT);
		CORE_PIN13_CONFIG = CONFIG_PULLUP;
	}
	inline void clr0() __attribute__((always_inline)) {
		CORE_PIN8_CONFIG = ((CORE_PIN8_PORTREG & CORE_PIN8_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN8_DDRREG, CORE_PIN8_BIT);
	}
	inline void clr1() __attribute__((always_inline)) {
		CORE_PIN9_CONFIG = ((CORE_PIN9_PORTREG & CORE_PIN9_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN9_DDRREG, CORE_PIN9_BIT);
	}
	inline void clr2() __attribute__((always_inline)) {
		CORE_PIN10_CONFIG = ((CORE_PIN10_PORTREG & CORE_PIN10_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN10_DDRREG, CORE_PIN10_BIT);
	}
	inline void clr3() __attribute__((always_inline)) {
		CORE_PIN11_CONFIG = ((CORE_PIN11_PORTREG & CORE_PIN11_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN11_DDRREG, CORE_PIN11_BIT);
	}
	inline void clr4() __attribute__((always_inline)) {
		CORE_PIN12_CONFIG = ((CORE_PIN12_PORTREG & CORE_PIN12_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN12_DDRREG, CORE_PIN12_BIT);
	}
	inline void clr5() __attribute__((always_inline)) {
		CORE_PIN13_CONFIG = ((CORE_PIN13_PORTREG & CORE_PIN13_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN13_DDRREG, CORE_PIN13_BIT);
	}
};

extern DDRBemulation DDRB;






class PORTCemulation
{
public:
	inline PORTCemulation & operator = (int val) __attribute__((always_inline)) {
		digitalWriteFast(14, (val & (1<<0)));
		if (!(CORE_PIN14_DDRREG & CORE_PIN14_BIT))
			CORE_PIN14_CONFIG = ((val & (1<<0)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(15, (val & (1<<1)));
		if (!(CORE_PIN15_DDRREG & CORE_PIN15_BIT))
			CORE_PIN15_CONFIG = ((val & (1<<1)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(16, (val & (1<<2)));
		if (!(CORE_PIN16_DDRREG & CORE_PIN16_BIT))
			CORE_PIN16_CONFIG = ((val & (1<<2)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(17, (val & (1<<3)));
		if (!(CORE_PIN17_DDRREG & CORE_PIN17_BIT))
			CORE_PIN17_CONFIG = ((val & (1<<3)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(18, (val & (1<<4)));
		if (!(CORE_PIN18_DDRREG & CORE_PIN18_BIT))
			CORE_PIN18_CONFIG = ((val & (1<<4)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		digitalWriteFast(19, (val & (1<<5)));
		if (!(CORE_PIN19_DDRREG & CORE_PIN19_BIT))
			CORE_PIN19_CONFIG = ((val & (1<<5)) ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		return *this;
	}
	inline PORTCemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) {
			digitalWriteFast(14, HIGH);
			if (!(CORE_PIN14_DDRREG & CORE_PIN14_BIT)) CORE_PIN14_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<1)) {
			digitalWriteFast(15, HIGH);
			if (!(CORE_PIN15_DDRREG & CORE_PIN15_BIT)) CORE_PIN15_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<2)) {
			digitalWriteFast(16, HIGH);
			if (!(CORE_PIN16_DDRREG & CORE_PIN16_BIT)) CORE_PIN16_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<3)) {
			digitalWriteFast(17, HIGH);
			if (!(CORE_PIN17_DDRREG & CORE_PIN17_BIT)) CORE_PIN17_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<4)) {
			digitalWriteFast(18, HIGH);
			if (!(CORE_PIN18_DDRREG & CORE_PIN18_BIT)) CORE_PIN18_CONFIG = CONFIG_PULLUP;
		}
		if (val & (1<<5)) {
			digitalWriteFast(19, HIGH);
			if (!(CORE_PIN19_DDRREG & CORE_PIN19_BIT)) CORE_PIN19_CONFIG = CONFIG_PULLUP;
		}
		return *this;
	}
	inline PORTCemulation & operator &= (int val) __attribute__((always_inline)) {
		if (!(val & (1<<0))) {
			digitalWriteFast(14, LOW);
			if (!(CORE_PIN14_DDRREG & CORE_PIN14_BIT)) CORE_PIN14_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<1))) {
			digitalWriteFast(15, LOW);
			if (!(CORE_PIN15_DDRREG & CORE_PIN15_BIT)) CORE_PIN15_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<2))) {
			digitalWriteFast(16, LOW);
			if (!(CORE_PIN16_DDRREG & CORE_PIN16_BIT)) CORE_PIN16_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<3))) {
			digitalWriteFast(17, LOW);
			if (!(CORE_PIN17_DDRREG & CORE_PIN17_BIT)) CORE_PIN17_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<4))) {
			digitalWriteFast(18, LOW);
			if (!(CORE_PIN18_DDRREG & CORE_PIN18_BIT)) CORE_PIN18_CONFIG = CONFIG_NOPULLUP;
		}
		if (!(val & (1<<5))) {
			digitalWriteFast(19, LOW);
			if (!(CORE_PIN19_DDRREG & CORE_PIN19_BIT)) CORE_PIN19_CONFIG = CONFIG_NOPULLUP;
		}
		return *this;
	}
};
extern PORTCemulation PORTC;

class PINCemulation
{
public:
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		if ((val & (1<<0)) && digitalReadFast(14)) ret |= (1<<0);
		if ((val & (1<<1)) && digitalReadFast(15)) ret |= (1<<1);
		if ((val & (1<<2)) && digitalReadFast(16)) ret |= (1<<2);
		if ((val & (1<<3)) && digitalReadFast(17)) ret |= (1<<3);
		if ((val & (1<<4)) && digitalReadFast(18)) ret |= (1<<4);
		if ((val & (1<<5)) && digitalReadFast(19)) ret |= (1<<5);
		return ret;
	}
	operator int () const __attribute__((always_inline)) {
		int ret = 0;
		if (digitalReadFast(14)) ret |= (1<<0);
		if (digitalReadFast(15)) ret |= (1<<1);
		if (digitalReadFast(15)) ret |= (1<<2);
		if (digitalReadFast(17)) ret |= (1<<3);
		if (digitalReadFast(18)) ret |= (1<<4);
		if (digitalReadFast(19)) ret |= (1<<5);
		return ret;
	}
};
extern PINCemulation PINC;

class DDRCemulation
{
public:
	inline DDRCemulation & operator = (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) set0(); else clr0();
		if (val & (1<<1)) set1(); else clr1();
		if (val & (1<<2)) set2(); else clr2();
		if (val & (1<<3)) set3(); else clr3();
		if (val & (1<<4)) set4(); else clr4();
		if (val & (1<<5)) set5(); else clr5();
		return *this;
	}
	inline DDRCemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & (1<<0)) set0();
		if (val & (1<<1)) set1();
		if (val & (1<<2)) set2();
		if (val & (1<<3)) set3();
		if (val & (1<<4)) set4();
		if (val & (1<<5)) set5();
		return *this;
	}
	inline DDRCemulation & operator &= (int val) __attribute__((always_inline)) {
		if (!(val & (1<<0))) clr0();
		if (!(val & (1<<1))) clr1();
		if (!(val & (1<<2))) clr2();
		if (!(val & (1<<3))) clr3();
		if (!(val & (1<<4))) clr4();
		if (!(val & (1<<5))) clr5();
		return *this;
	}
private:
	inline void set0() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN14_DDRREG, CORE_PIN14_BIT);
		CORE_PIN14_CONFIG = CONFIG_PULLUP;
	}
	inline void set1() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN15_DDRREG, CORE_PIN15_BIT);
		CORE_PIN15_CONFIG = CONFIG_PULLUP;
	}
	inline void set2() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN16_DDRREG, CORE_PIN16_BIT);
		CORE_PIN16_CONFIG = CONFIG_PULLUP;
	}
	inline void set3() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN17_DDRREG, CORE_PIN17_BIT);
		CORE_PIN17_CONFIG = CONFIG_PULLUP;
	}
	inline void set4() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN18_DDRREG, CORE_PIN18_BIT);
		CORE_PIN18_CONFIG = CONFIG_PULLUP;
	}
	inline void set5() __attribute__((always_inline)) {
		GPIO_SETBIT_ATOMIC(CORE_PIN19_DDRREG, CORE_PIN19_BIT);
		CORE_PIN19_CONFIG = CONFIG_PULLUP;
	}
	inline void clr0() __attribute__((always_inline)) {
		CORE_PIN14_CONFIG = ((CORE_PIN14_PORTREG & CORE_PIN14_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN14_DDRREG, CORE_PIN14_BIT);
	}
	inline void clr1() __attribute__((always_inline)) {
		CORE_PIN15_CONFIG = ((CORE_PIN15_PORTREG & CORE_PIN15_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN15_DDRREG, CORE_PIN15_BIT);
	}
	inline void clr2() __attribute__((always_inline)) {
		CORE_PIN16_CONFIG = ((CORE_PIN16_PORTREG & CORE_PIN16_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN16_DDRREG, CORE_PIN16_BIT);
	}
	inline void clr3() __attribute__((always_inline)) {
		CORE_PIN17_CONFIG = ((CORE_PIN17_PORTREG & CORE_PIN17_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN17_DDRREG, CORE_PIN17_BIT);
	}
	inline void clr4() __attribute__((always_inline)) {
		CORE_PIN18_CONFIG = ((CORE_PIN18_PORTREG & CORE_PIN18_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN18_DDRREG, CORE_PIN18_BIT);
	}
	inline void clr5() __attribute__((always_inline)) {
		CORE_PIN19_CONFIG = ((CORE_PIN19_PORTREG & CORE_PIN19_BITMASK)
		  ? CONFIG_PULLUP : CONFIG_NOPULLUP);
		GPIO_CLRBIT_ATOMIC(CORE_PIN19_DDRREG, CORE_PIN19_BIT);
	}
};

extern DDRCemulation DDRC;


#define PINB0 0
#define PINB1 1
#define PINB2 2
#define PINB3 3
#define PINB4 4
#define PINB5 5
#define PINB6 6
#define PINB7 7
#define DDB0 0
#define DDB1 1
#define DDB2 2
#define DDB3 3
#define DDB4 4
#define DDB5 5
#define DDB6 6
#define DDB7 7
#define PORTB0 0
#define PORTB1 1
#define PORTB2 2
#define PORTB3 3
#define PORTB4 4
#define PORTB5 5
#define PORTB6 6
#define PORTB7 7
#define PINC0 0
#define PINC1 1
#define PINC2 2
#define PINC3 3
#define PINC4 4
#define PINC5 5
#define PINC6 6
#define DDC0 0
#define DDC1 1
#define DDC2 2
#define DDC3 3
#define DDC4 4
#define DDC5 5
#define DDC6 6
#define PORTC0 0
#define PORTC1 1
#define PORTC2 2
#define PORTC3 3
#define PORTC4 4
#define PORTC5 5
#define PORTC6 6
#define PIND0 0
#define PIND1 1
#define PIND2 2
#define PIND3 3
#define PIND4 4
#define PIND5 5
#define PIND6 6
#define PIND7 7
#define DDD0 0
#define DDD1 1
#define DDD2 2
#define DDD3 3
#define DDD4 4
#define DDD5 5
#define DDD6 6
#define DDD7 7
#define PORTD0 0
#define PORTD1 1
#define PORTD2 2
#define PORTD3 3
#define PORTD4 4
#define PORTD5 5
#define PORTD6 6
#define PORTD7 7





#if 0
extern "C" {
void serial_print(const char *p);
void serial_phex(uint32_t n);
void serial_phex16(uint32_t n);
void serial_phex32(uint32_t n);
}
#endif


// SPI Control Register ­ SPCR
#define SPIE	7	// SPI Interrupt Enable - not supported
#define SPE	6	// SPI Enable
#define DORD	5	// DORD: Data Order
#define MSTR	4	// MSTR: Master/Slave Select
#define CPOL	3	// CPOL: Clock Polarity
#define CPHA	2	// CPHA: Clock Phase
#define SPR1	1	// Clock: 3 = 125 kHz, 2 = 250 kHz, 1 = 1 MHz, 0->4 MHz
#define SPR0	0
// SPI Status Register ­ SPSR
#define SPIF	7	// SPIF: SPI Interrupt Flag
#define WCOL	6	// WCOL: Write COLlision Flag - not implemented
#define SPI2X	0	// SPI2X: Double SPI Speed Bit
// SPI Data Register ­ SPDR


class SPCRemulation;
class SPSRemulation;
class SPDRemulation;

#if defined(KINETISK)

class SPCRemulation
{
public:
	inline SPCRemulation & operator = (int val) __attribute__((always_inline)) {
		uint32_t ctar, mcr, sim6;
		//serial_print("SPCR=");
		//serial_phex(val);
		//serial_print("\n");
		sim6 = SIM_SCGC6;
		if (!(sim6 & SIM_SCGC6_SPI0)) {
			//serial_print("init1\n");
			SIM_SCGC6 = sim6 | SIM_SCGC6_SPI0;
			SPI0_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
		}
		if (!(val & (1<<SPE))) {
			SPI0_MCR |= SPI_MCR_MDIS; // TODO: use bitband for atomic access
		}
		ctar = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1);
		if (val & (1<<DORD))  ctar |= SPI_CTAR_LSBFE;
		if (val & (1<<CPOL))  ctar |= SPI_CTAR_CPOL;
		if (val & (1<<CPHA)) {
			ctar |= SPI_CTAR_CPHA;
			if ((val & 3) == 0) {
				ctar |= SPI_CTAR_BR(1) | SPI_CTAR_ASC(1);
			} else if ((val & 3) == 1) {
				ctar |= SPI_CTAR_BR(4) | SPI_CTAR_ASC(4);
			} else if ((val & 3) == 2) {
				ctar |= SPI_CTAR_BR(6) | SPI_CTAR_ASC(6);
			} else {
				ctar |= SPI_CTAR_BR(7) | SPI_CTAR_ASC(7);
			}
		} else {
			if ((val & 3) == 0) {
				ctar |= SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
			} else if ((val & 3) == 1) {
				ctar |= SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(4);
			} else if ((val & 3) == 2) {
				ctar |= SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(6);
			} else {
				ctar |= SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(7);
			}
		}
		ctar |= (SPI0_CTAR0 & SPI_CTAR_DBR);
		update_ctar(ctar);
		mcr = SPI_MCR_DCONF(0) | SPI_MCR_PCSIS(0x1F);
		if (val & (1<<MSTR)) mcr |= SPI_MCR_MSTR;
		if (val & (1<<SPE)) {
			mcr &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
			SPI0_MCR = mcr;
			enable_pins();
		} else {
			mcr |= (SPI_MCR_MDIS | SPI_MCR_HALT);
			SPI0_MCR = mcr;
			disable_pins();
		}
		//serial_print("MCR:");
		//serial_phex32(SPI0_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI0_CTAR0);
		//serial_print("\n");
		return *this;
	}
	inline SPCRemulation & operator |= (int val) __attribute__((always_inline)) {
		uint32_t sim6;
		//serial_print("SPCR |= ");
		//serial_phex(val);
		//serial_print("\n");
		sim6 = SIM_SCGC6;
		if (!(sim6 & SIM_SCGC6_SPI0)) {
			//serial_print("init2\n");
			SIM_SCGC6 = sim6 | SIM_SCGC6_SPI0;
			SPI0_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1);
		}
		if (val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
			uint32_t ctar = SPI0_CTAR0;
			if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE; // TODO: use bitband
			if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
			if ((val & 3) == 1) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 2) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 3) {
				// TODO: implement - is this ever really needed
			}
			if (val & (1<<CPHA) && !(ctar & SPI_CTAR_CPHA)) {
				ctar |= SPI_CTAR_CPHA;
				// TODO: clear SPI_CTAR_CSSCK, set SPI_CTAR_ASC
			}
			update_ctar(ctar);
		}
		if (val & (1<<MSTR)) SPI0_MCR |= SPI_MCR_MSTR;
		if (val & (1<<SPE)) {
			SPI0_MCR &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
			enable_pins();
		}
		//serial_print("MCR:");
		//serial_phex32(SPI0_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI0_CTAR0);
		//serial_print("\n");
		return *this;
	}
	inline SPCRemulation & operator &= (int val) __attribute__((always_inline)) {
		//serial_print("SPCR &= ");
		//serial_phex(val);
		//serial_print("\n");
		SIM_SCGC6 |= SIM_SCGC6_SPI0;
		if (!(val & (1<<SPE))) {
			SPI0_MCR |= (SPI_MCR_MDIS | SPI_MCR_HALT);
			disable_pins();
		}
		if ((val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) != ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
			uint32_t ctar = SPI0_CTAR0;
			if (!(val & (1<<DORD))) ctar &= ~SPI_CTAR_LSBFE; // TODO: use bitband
			if (!(val & (1<<CPOL))) ctar &= ~SPI_CTAR_CPOL;
			if ((val & 3) == 0) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 1) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 2) {
				// TODO: implement - is this ever really needed
			}
			if (!(val & (1<<CPHA)) && (ctar & SPI_CTAR_CPHA)) {
				ctar &= ~SPI_CTAR_CPHA;
				// TODO: set SPI_CTAR_ASC, clear SPI_CTAR_CSSCK
			}
			update_ctar(ctar);
		}
		if (!(val & (1<<MSTR))) SPI0_MCR &= ~SPI_MCR_MSTR;
		return *this;
	}
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		//serial_print("SPCR & ");
		//serial_phex(val);
		//serial_print("\n");
		SIM_SCGC6 |= SIM_SCGC6_SPI0;
		if ((val & (1<<DORD)) && (SPI0_CTAR0 & SPI_CTAR_LSBFE)) ret |= (1<<DORD);
		if ((val & (1<<CPOL)) && (SPI0_CTAR0 & SPI_CTAR_CPOL)) ret |= (1<<CPOL);
		if ((val & (1<<CPHA)) && (SPI0_CTAR0 & SPI_CTAR_CPHA)) ret |= (1<<CPHA);
		if ((val & 3) == 3) {
			uint32_t dbr = SPI0_CTAR0 & 15;
			if (dbr <= 1) {
			} else if (dbr <= 4) {
				ret |= (1<<SPR0);
			} else if (dbr <= 6) {
				ret |= (1<<SPR1);
			} else {
				ret |= (1<<SPR1)|(1<<SPR0);
			}
		} else if ((val & 3) == 1) {
			// TODO: implement - is this ever really needed
		} else if ((val & 3) == 2) {
			// TODO: implement - is this ever really needed
		}
		if (val & (1<<SPE) && (!(SPI0_MCR & SPI_MCR_MDIS))) ret |= (1<<SPE);
		if (val & (1<<MSTR) && (SPI0_MCR & SPI_MCR_MSTR)) ret |= (1<<MSTR);
		//serial_print("ret = ");
		//serial_phex(ret);
		//serial_print("\n");
		return ret;
	}
	operator int () const __attribute__((always_inline)) {
		int ret = 0;
		if ((SIM_SCGC6 & SIM_SCGC6_SPI0)) {
			int ctar = SPI0_CTAR0;
			if (ctar & SPI_CTAR_LSBFE) ret |= (1<<DORD);
			if (ctar & SPI_CTAR_CPOL) ret |= (1<<CPOL);
			if (ctar & SPI_CTAR_CPHA) ret |= (1<<CPHA);
			ctar &= 15;
			if (ctar <= 1) {
			} else if (ctar <= 4) {
				ret |= (1<<SPR0);
			} else if (ctar <= 6) {
				ret |= (1<<SPR1);
			} else {
				ret |= (1<<SPR1)|(1<<SPR0);
			}
			int mcr = SPI0_MCR;
			if (!(mcr & SPI_MCR_MDIS)) ret |= (1<<SPE);
			if (mcr & SPI_MCR_MSTR) ret |= (1<<MSTR);
		}
		return ret;
	}
	inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
		uint8_t newpinout = pinout;
		// More than two options so now 2 bits
		if (pin == 11) newpinout &= ~3;
		if (pin == 7) newpinout  =(newpinout & ~0x3) | 1;
		if (pin == 28) newpinout = (newpinout & ~0x3) | 2;
		if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
			// First unconfigure previous pin
			switch (pinout & 3) {
				case 0: CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
				case 1: CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
				default: CORE_PIN28_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
			}
			switch (newpinout & 3) {
				case 0: CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); break;
				case 1: CORE_PIN7_CONFIG = PORT_PCR_MUX(2); break;
				default: CORE_PIN28_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
#else
		uint8_t newpinout = pinout;
		if (pin == 11) newpinout &= ~1;
		if (pin == 7) newpinout |= 1;
		if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
			if ((newpinout & 1) == 0) {
				CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
			} else {
				CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN7_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
#endif
	}
	inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
		uint8_t newpinout = pinout;
		// More than two options so now 2 bits
		if (pin == 12) newpinout &= ~0xc;
		if (pin == 8) newpinout  =(newpinout & ~0xc) | 4;
		if (pin == 39) newpinout = (newpinout & ~0xc) | 8;
		if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
			// First unconfigure previous pin
			switch (pinout & 0xc) {
				case 0: CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
				case 0x4: CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
				default: CORE_PIN39_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
			}
			switch (newpinout & 0xc) {
				case 0: CORE_PIN12_CONFIG = PORT_PCR_MUX(2); break;
				case 0x4: CORE_PIN8_CONFIG = PORT_PCR_MUX(2); break;
				default: CORE_PIN39_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
#else
		uint8_t newpinout = pinout;
		if (pin == 12) newpinout &= ~2;
		if (pin == 8) newpinout |= 2;
		if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
			if ((newpinout & 2) == 0) {
				CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN12_CONFIG = PORT_PCR_MUX(2);
			} else {
				CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN8_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
#endif
	}
	inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
		uint8_t newpinout = pinout;
		// More than two options so now 2 bits
		if (pin == 13) newpinout &= ~0x30;
		if (pin == 14) newpinout  =(newpinout & ~0x30) | 0x10;
		if (pin == 27) newpinout = (newpinout & ~0x30) | 0x20;
		if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
			// First unconfigure previous pin
			switch (pinout & 0x30) {
				case 0: CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
				case 0x10: CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
				default: CORE_PIN27_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
			}
			switch (newpinout & 0x30) {
				case 0: CORE_PIN13_CONFIG =  PORT_PCR_DSE | PORT_PCR_MUX(2); break;
				case 0x10: CORE_PIN14_CONFIG = PORT_PCR_MUX(2); break;
				default: CORE_PIN27_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
#else
		uint8_t newpinout = pinout;
		if (pin == 13) newpinout &= ~4;
		if (pin == 14) newpinout |= 4;
		if ((SIM_SCGC6 & SIM_SCGC6_SPI0) && newpinout != pinout) {
			if ((newpinout & 4) == 0) {
				CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
			} else {
				CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN14_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
#endif
	}
	friend class SPSRemulation;
	friend class SPIFIFOclass;
private:
	static inline void update_ctar(uint32_t ctar) __attribute__((always_inline)) {
		if (SPI0_CTAR0 == ctar) return;
		uint32_t mcr = SPI0_MCR;
		if (mcr & SPI_MCR_MDIS) {
			SPI0_CTAR0 = ctar;
		} else {
			SPI0_MCR = mcr | SPI_MCR_MDIS | SPI_MCR_HALT;
			SPI0_CTAR0 = ctar;
			SPI0_MCR = mcr;
		}
	}
	static uint8_t pinout;
public:
	inline void enable_pins(void) __attribute__((always_inline)) {
		//serial_print("enable_pins\n");
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
		switch (pinout & 3) {
			case 0: CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); break;
			case 1: CORE_PIN7_CONFIG = PORT_PCR_MUX(2); break;
			default: CORE_PIN28_CONFIG = PORT_PCR_MUX(2);
		}
		switch (pinout & 0xc) {
			case 0: CORE_PIN12_CONFIG = PORT_PCR_MUX(2); break;
			case 0x4: CORE_PIN8_CONFIG = PORT_PCR_MUX(2); break;
			default: CORE_PIN39_CONFIG = PORT_PCR_MUX(2);
		}
		switch (pinout & 0x30) {
			case 0: CORE_PIN13_CONFIG =  PORT_PCR_DSE | PORT_PCR_MUX(2); break;
			case 0x10: CORE_PIN14_CONFIG = PORT_PCR_MUX(2); break;
			default: CORE_PIN27_CONFIG = PORT_PCR_MUX(2);
		}
#else
		if ((pinout & 1) == 0) {
			CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // DOUT/MOSI = 11 (PTC6)
		} else {
			CORE_PIN7_CONFIG = PORT_PCR_MUX(2); // DOUT/MOSI = 7 (PTD2)
		}
		if ((pinout & 2) == 0) {
			CORE_PIN12_CONFIG = PORT_PCR_MUX(2);  // DIN/MISO = 12 (PTC7)
		} else {
			CORE_PIN8_CONFIG = PORT_PCR_MUX(2);  // DIN/MISO = 8 (PTD3)
		}
		if ((pinout & 4) == 0) {
			CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // SCK = 13 (PTC5)
		} else {
			CORE_PIN14_CONFIG = PORT_PCR_MUX(2); // SCK = 14 (PTD1)
		}
#endif
	}
	inline void disable_pins(void) __attribute__((always_inline)) {
#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
		switch (pinout & 3) {
			case 0: CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
			case 1: CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
			default: CORE_PIN28_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		}

		switch (pinout & 0xc) {
			case 0: CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
			case 0x4: CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
			default: CORE_PIN39_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		}
		switch (pinout & 0x30) {
			case 0: CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
			case 0x10: CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); break;
			default: CORE_PIN27_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		}
#else
		//serial_print("disable_pins\n");
		if ((pinout & 1) == 0) {
			CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		}
		if ((pinout & 2) == 0) {
			CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		}
		if ((pinout & 4) == 0) {
			CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
		}
#endif
	}
};
extern SPCRemulation SPCR;

#if defined(__MK64FX512__) || defined(__MK66FX1M0__)
class SPCR1emulation
{
public:
	inline SPCR1emulation & operator = (int val) __attribute__((always_inline)) {
		uint32_t ctar, mcr, sim6;
		//serial_print("SPCR=");
		//serial_phex(val);
		//serial_print("\n");
		sim6 = SIM_SCGC6;
		if (!(sim6 & SIM_SCGC6_SPI1)) {
			//serial_print("init1\n");
			SIM_SCGC6 = sim6 | SIM_SCGC6_SPI1;
			SPI1_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
		}
		if (!(val & (1<<SPE))) {
			SPI1_MCR |= SPI_MCR_MDIS; // TODO: use bitband for atomic access
		}
		ctar = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1);
		if (val & (1<<DORD))  ctar |= SPI_CTAR_LSBFE;
		if (val & (1<<CPOL))  ctar |= SPI_CTAR_CPOL;
		if (val & (1<<CPHA)) {
			ctar |= SPI_CTAR_CPHA;
			if ((val & 3) == 0) {
				ctar |= SPI_CTAR_BR(1) | SPI_CTAR_ASC(1);
			} else if ((val & 3) == 1) {
				ctar |= SPI_CTAR_BR(4) | SPI_CTAR_ASC(4);
			} else if ((val & 3) == 2) {
				ctar |= SPI_CTAR_BR(6) | SPI_CTAR_ASC(6);
			} else {
				ctar |= SPI_CTAR_BR(7) | SPI_CTAR_ASC(7);
			}
		} else {
			if ((val & 3) == 0) {
				ctar |= SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
			} else if ((val & 3) == 1) {
				ctar |= SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(4);
			} else if ((val & 3) == 2) {
				ctar |= SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(6);
			} else {
				ctar |= SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(7);
			}
		}
		ctar |= (SPI1_CTAR0 & SPI_CTAR_DBR);
		update_ctar(ctar);
		mcr = SPI_MCR_DCONF(0) | SPI_MCR_PCSIS(0x1F);
		if (val & (1<<MSTR)) mcr |= SPI_MCR_MSTR;
		if (val & (1<<SPE)) {
			mcr &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
			SPI1_MCR = mcr;
			enable_pins();
		} else {
			mcr |= (SPI_MCR_MDIS | SPI_MCR_HALT);
			SPI1_MCR = mcr;
			disable_pins();
		}
		//serial_print("MCR:");
		//serial_phex32(SPI1_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI1_CTAR0);
		//serial_print("\n");
		return *this;
	}
	inline SPCR1emulation & operator |= (int val) __attribute__((always_inline)) {
		uint32_t sim6;
		//serial_print("SPCR |= ");
		//serial_phex(val);
		//serial_print("\n");
		sim6 = SIM_SCGC6;
		if (!(sim6 & SIM_SCGC6_SPI1)) {
			//serial_print("init2\n");
			SIM_SCGC6 = sim6 | SIM_SCGC6_SPI1;
			SPI1_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1);
		}
		if (val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
			uint32_t ctar = SPI1_CTAR0;
			if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE; // TODO: use bitband
			if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
			if ((val & 3) == 1) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 2) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 3) {
				// TODO: implement - is this ever really needed
			}
			if (val & (1<<CPHA) && !(ctar & SPI_CTAR_CPHA)) {
				ctar |= SPI_CTAR_CPHA;
				// TODO: clear SPI_CTAR_CSSCK, set SPI_CTAR_ASC
			}
			update_ctar(ctar);
		}
		if (val & (1<<MSTR)) SPI1_MCR |= SPI_MCR_MSTR;
		if (val & (1<<SPE)) {
			SPI1_MCR &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
			enable_pins();
		}
		//serial_print("MCR:");
		//serial_phex32(SPI1_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI1_CTAR0);
		//serial_print("\n");
		return *this;
	}
	inline SPCR1emulation & operator &= (int val) __attribute__((always_inline)) {
		//serial_print("SPCR &= ");
		//serial_phex(val);
		//serial_print("\n");
		SIM_SCGC6 |= SIM_SCGC6_SPI1;
		if (!(val & (1<<SPE))) {
			SPI1_MCR |= (SPI_MCR_MDIS | SPI_MCR_HALT);
			disable_pins();
		}
		if ((val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) != ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
			uint32_t ctar = SPI1_CTAR0;
			if (!(val & (1<<DORD))) ctar &= ~SPI_CTAR_LSBFE; // TODO: use bitband
			if (!(val & (1<<CPOL))) ctar &= ~SPI_CTAR_CPOL;
			if ((val & 3) == 0) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 1) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 2) {
				// TODO: implement - is this ever really needed
			}
			if (!(val & (1<<CPHA)) && (ctar & SPI_CTAR_CPHA)) {
				ctar &= ~SPI_CTAR_CPHA;
				// TODO: set SPI_CTAR_ASC, clear SPI_CTAR_CSSCK
			}
			update_ctar(ctar);
		}
		if (!(val & (1<<MSTR))) SPI1_MCR &= ~SPI_MCR_MSTR;
		return *this;
	}
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		//serial_print("SPCR & ");
		//serial_phex(val);
		//serial_print(" MCR:");
		//serial_phex32(SPI1_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI1_CTAR0);
		//serial_print("\n");

		//serial_print("\n");
		SIM_SCGC6 |= SIM_SCGC6_SPI1;
		if ((val & (1<<DORD)) && (SPI1_CTAR0 & SPI_CTAR_LSBFE)) ret |= (1<<DORD);
		if ((val & (1<<CPOL)) && (SPI1_CTAR0 & SPI_CTAR_CPOL)) ret |= (1<<CPOL);
		if ((val & (1<<CPHA)) && (SPI1_CTAR0 & SPI_CTAR_CPHA)) ret |= (1<<CPHA);
		if ((val & 3) == 3) {
			uint32_t dbr = SPI1_CTAR0 & 15;
			if (dbr <= 1) {
			} else if (dbr <= 4) {
				ret |= (1<<SPR0);
			} else if (dbr <= 6) {
				ret |= (1<<SPR1);
			} else {
				ret |= (1<<SPR1)|(1<<SPR0);
			}
		} else if ((val & 3) == 1) {
			// TODO: implement - is this ever really needed
		} else if ((val & 3) == 2) {
			// TODO: implement - is this ever really needed
		}
		if (val & (1<<SPE) && (!(SPI1_MCR & SPI_MCR_MDIS))) ret |= (1<<SPE);
		if (val & (1<<MSTR) && (SPI1_MCR & SPI_MCR_MSTR)) ret |= (1<<MSTR);
		//serial_print("ret = ");
		//serial_phex(ret);
		//serial_print("\n");
		return ret;
	}
	inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
		// More options, so 2 bits
		pinout &= ~3;
		switch (pin) {
			case 0: break;
			case 21: pinout |= 1; break; 
			case 61: pinout |= 2; break;
			case 59: pinout |= 3; break;
		}
	}
	inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
		// More options, so 2 bits
		pinout &= ~0xc;
		switch (pin) {
			case 1: break;
			case 5: pinout |= 0x4; break; 
			case 61: pinout |= 0x8; break;
			case 59: pinout |= 0xc; break;
		}
	}
	inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
		// More options, so 2 bits
		pinout &= ~0x30;
		switch (pin) {
			case 32: break;
			case 20: pinout |= 0x10; break; 
			case 60: pinout |= 0x20; break;
		}
	}
	inline void enable_pins(void) __attribute__((always_inline)) {
		//serial_print("enable_pins\n");
		// MOSI (SOUT)
		switch (pinout & 0x3) {
			case 0: CORE_PIN0_CONFIG = PORT_PCR_MUX(2); break;
			case 1: CORE_PIN21_CONFIG = PORT_PCR_MUX(7); break;
			case 2: CORE_PIN61_CONFIG = PORT_PCR_MUX(7); break;
			case 3: CORE_PIN59_CONFIG = PORT_PCR_MUX(2); break;
		}
		// MISO (SIN)
		switch (pinout & 0xc) {
			case 0x0: CORE_PIN1_CONFIG = PORT_PCR_MUX(2); break;
			case 0x4: CORE_PIN5_CONFIG = PORT_PCR_MUX(7); break;
			case 0x8: CORE_PIN61_CONFIG = PORT_PCR_MUX(2); break;
			case 0xc: CORE_PIN59_CONFIG = PORT_PCR_MUX(7); break;
		}
		// SCK
		switch (pinout & 0x30) {
			case 0x0: CORE_PIN32_CONFIG = PORT_PCR_MUX(2); break;
			case 0x10: CORE_PIN20_CONFIG = PORT_PCR_MUX(7); break;
			case 0x20: CORE_PIN60_CONFIG = PORT_PCR_MUX(2); break;
		}
	}
	inline void disable_pins(void) __attribute__((always_inline)) {
		switch (pinout & 0x3) {
			case 0: CORE_PIN0_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 1: CORE_PIN21_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 2: CORE_PIN61_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 3: CORE_PIN59_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
		}
		switch (pinout & 0xc) {
			case 0x0: CORE_PIN1_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 0x4: CORE_PIN5_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 0x8: CORE_PIN61_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 0xc: CORE_PIN59_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
		}
		switch (pinout & 0x30) {
			case 0x0: CORE_PIN32_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 0x10: CORE_PIN20_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
			case 0x20: CORE_PIN60_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); break;
		}
	}
	friend class SPIFIFO1class;
private:
	static uint8_t pinout;
	static inline void update_ctar(uint32_t ctar) __attribute__((always_inline)) {
		if (SPI1_CTAR0 == ctar) return;
		uint32_t mcr = SPI1_MCR;
		if (mcr & SPI_MCR_MDIS) {
			SPI1_CTAR0 = ctar;
		} else {
			SPI1_MCR = mcr | SPI_MCR_MDIS | SPI_MCR_HALT;
			SPI1_CTAR0 = ctar;
			SPI1_MCR = mcr;
		}
	}
};
extern SPCR1emulation SPCR1;

////////////////////
// SPI2
class SPCR2emulation
{
public:
	inline SPCR2emulation & operator = (int val) __attribute__((always_inline)) {
		uint32_t ctar, mcr, sim3;
		//serial_print("SPCR=");
		//serial_phex(val);
		//serial_print("\n");
		sim3 = SIM_SCGC3;
		if (!(sim3 & SIM_SCGC3_SPI2)) {
			//serial_print("init1\n");
			SIM_SCGC3 = sim3 | SIM_SCGC3_SPI2;
			SPI2_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
		}
		if (!(val & (1<<SPE))) {
			SPI2_MCR |= SPI_MCR_MDIS; // TODO: use bitband for atomic access
		}
		ctar = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1);
		if (val & (1<<DORD))  ctar |= SPI_CTAR_LSBFE;
		if (val & (1<<CPOL))  ctar |= SPI_CTAR_CPOL;
		if (val & (1<<CPHA)) {
			ctar |= SPI_CTAR_CPHA;
			if ((val & 3) == 0) {
				ctar |= SPI_CTAR_BR(1) | SPI_CTAR_ASC(1);
			} else if ((val & 3) == 1) {
				ctar |= SPI_CTAR_BR(4) | SPI_CTAR_ASC(4);
			} else if ((val & 3) == 2) {
				ctar |= SPI_CTAR_BR(6) | SPI_CTAR_ASC(6);
			} else {
				ctar |= SPI_CTAR_BR(7) | SPI_CTAR_ASC(7);
			}
		} else {
			if ((val & 3) == 0) {
				ctar |= SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1);
			} else if ((val & 3) == 1) {
				ctar |= SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(4);
			} else if ((val & 3) == 2) {
				ctar |= SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(6);
			} else {
				ctar |= SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(7);
			}
		}
		ctar |= (SPI2_CTAR0 & SPI_CTAR_DBR);
		update_ctar(ctar);
		mcr = SPI_MCR_DCONF(0) | SPI_MCR_PCSIS(0x1F);
		if (val & (1<<MSTR)) mcr |= SPI_MCR_MSTR;
		if (val & (1<<SPE)) {
			mcr &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
			SPI2_MCR = mcr;
			enable_pins();
		} else {
			mcr |= (SPI_MCR_MDIS | SPI_MCR_HALT);
			SPI2_MCR = mcr;
			disable_pins();
		}
		//serial_print("MCR:");
		//serial_phex32(SPI2_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI2_CTAR0);
		//serial_print("\n");
		return *this;
	}
	inline SPCR2emulation & operator |= (int val) __attribute__((always_inline)) {
		uint32_t sim3;
		//serial_print("SPCR |= ");
		//serial_phex(val);
		//serial_print("\n");
		sim3 = SIM_SCGC3;
		if (!(sim3 & SIM_SCGC3_SPI2)) {
			//serial_print("init2\n");
			SIM_SCGC6 = sim3 | SIM_SCGC3_SPI2;
			SPI2_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(1) | SPI_CTAR_BR(1);
		}
		if (val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
			uint32_t ctar = SPI2_CTAR0;
			if (val & (1<<DORD)) ctar |= SPI_CTAR_LSBFE; // TODO: use bitband
			if (val & (1<<CPOL)) ctar |= SPI_CTAR_CPOL;
			if ((val & 3) == 1) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 2) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 3) {
				// TODO: implement - is this ever really needed
			}
			if (val & (1<<CPHA) && !(ctar & SPI_CTAR_CPHA)) {
				ctar |= SPI_CTAR_CPHA;
				// TODO: clear SPI_CTAR_CSSCK, set SPI_CTAR_ASC
			}
			update_ctar(ctar);
		}
		if (val & (1<<MSTR)) SPI2_MCR |= SPI_MCR_MSTR;
		if (val & (1<<SPE)) {
			SPI2_MCR &= ~(SPI_MCR_MDIS | SPI_MCR_HALT);
			enable_pins();
		}
		//serial_print("MCR:");
		//serial_phex32(SPI2_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI2_CTAR0);
		//serial_print("\n");
		return *this;
	}
	inline SPCR2emulation & operator &= (int val) __attribute__((always_inline)) {
		//serial_print("SPCR &= ");
		//serial_phex(val);
		//serial_print("\n");
		SIM_SCGC3 |= SIM_SCGC3_SPI2;
		if (!(val & (1<<SPE))) {
			SPI2_MCR |= (SPI_MCR_MDIS | SPI_MCR_HALT);
			disable_pins();
		}
		if ((val & ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) != ((1<<DORD)|(1<<CPOL)|(1<<CPHA)|3)) {
			uint32_t ctar = SPI2_CTAR0;
			if (!(val & (1<<DORD))) ctar &= ~SPI_CTAR_LSBFE; // TODO: use bitband
			if (!(val & (1<<CPOL))) ctar &= ~SPI_CTAR_CPOL;
			if ((val & 3) == 0) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 1) {
				// TODO: implement - is this ever really needed
			} else if ((val & 3) == 2) {
				// TODO: implement - is this ever really needed
			}
			if (!(val & (1<<CPHA)) && (ctar & SPI_CTAR_CPHA)) {
				ctar &= ~SPI_CTAR_CPHA;
				// TODO: set SPI_CTAR_ASC, clear SPI_CTAR_CSSCK
			}
			update_ctar(ctar);
		}
		if (!(val & (1<<MSTR))) SPI2_MCR &= ~SPI_MCR_MSTR;
		return *this;
	}
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		//serial_print("SPCR & ");
		//serial_phex(val);
		//serial_print(" MCR:");
		//serial_phex32(SPI2_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI2_CTAR0);
		//serial_print("\n");

		//serial_print("\n");
		SIM_SCGC3 |= SIM_SCGC3_SPI2;
		if ((val & (1<<DORD)) && (SPI2_CTAR0 & SPI_CTAR_LSBFE)) ret |= (1<<DORD);
		if ((val & (1<<CPOL)) && (SPI2_CTAR0 & SPI_CTAR_CPOL)) ret |= (1<<CPOL);
		if ((val & (1<<CPHA)) && (SPI2_CTAR0 & SPI_CTAR_CPHA)) ret |= (1<<CPHA);
		if ((val & 3) == 3) {
			uint32_t dbr = SPI2_CTAR0 & 15;
			if (dbr <= 1) {
			} else if (dbr <= 4) {
				ret |= (1<<SPR0);
			} else if (dbr <= 6) {
				ret |= (1<<SPR1);
			} else {
				ret |= (1<<SPR1)|(1<<SPR0);
			}
		} else if ((val & 3) == 1) {
			// TODO: implement - is this ever really needed
		} else if ((val & 3) == 2) {
			// TODO: implement - is this ever really needed
		}
		if (val & (1<<SPE) && (!(SPI2_MCR & SPI_MCR_MDIS))) ret |= (1<<SPE);
		if (val & (1<<MSTR) && (SPI2_MCR & SPI_MCR_MSTR)) ret |= (1<<MSTR);
		//serial_print("ret = ");
		//serial_phex(ret);
		//serial_print("\n");
		return ret;
	}
	inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
		if (pin == 44) pinout &= ~1; 
		if (pin == 52) pinout |= 1; 
	}
	inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
		if (pin == 45) pinout &= ~2; 
		if (pin == 51) pinout |= 2; 
	}
	inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
		if (pin == 46) pinout &= ~4; 
		if (pin == 53) pinout |= 4; 
	}
	inline void enable_pins(void) __attribute__((always_inline)) {
		//serial_print("enable_pins\n");
		if ((pinout & 1) == 0) {
			CORE_PIN44_CONFIG = PORT_PCR_MUX(2);
		} else {
			CORE_PIN52_CONFIG = PORT_PCR_MUX(2); 
		}
		if ((pinout & 2) == 0) {
			CORE_PIN45_CONFIG = PORT_PCR_MUX(2); 
		} else {
			CORE_PIN51_CONFIG = PORT_PCR_MUX(2); 
		}
		if ((pinout & 4) == 0) {
			CORE_PIN46_CONFIG = PORT_PCR_MUX(2); 
		} else {
			CORE_PIN53_CONFIG = PORT_PCR_MUX(2); 
		}
	}
	inline void disable_pins(void) __attribute__((always_inline)) {
		//serial_print("disable_pins\n");
		if ((pinout & 1) == 0) {
			CORE_PIN44_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN52_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		}
		if ((pinout & 2) == 0) {
			CORE_PIN45_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN51_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		}
		if ((pinout & 4) == 0) {
			CORE_PIN46_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); 
		} else {
			CORE_PIN53_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1); 
		}
	}
	friend class SPIFIFO1class;
private:
	static uint8_t pinout;
	static inline void update_ctar(uint32_t ctar) __attribute__((always_inline)) {
		if (SPI2_CTAR0 == ctar) return;
		uint32_t mcr = SPI2_MCR;
		if (mcr & SPI_MCR_MDIS) {
			SPI2_CTAR0 = ctar;
		} else {
			SPI2_MCR = mcr | SPI_MCR_MDIS | SPI_MCR_HALT;
			SPI2_CTAR0 = ctar;
			SPI2_MCR = mcr;
		}
	}
};
extern SPCR2emulation SPCR2;



#endif

class SPSRemulation
{
public:
	inline SPSRemulation & operator = (int val) __attribute__((always_inline)) {
		//serial_print("SPSR=");
		//serial_phex(val);
		//serial_print("\n");
		uint32_t ctar = SPI0_CTAR0;
		if (val & (1<<SPI2X)) {
			ctar |= SPI_CTAR_DBR;
		} else {
			ctar &= ~SPI_CTAR_DBR;
		}
		SPCRemulation::update_ctar(ctar);
		//serial_print("MCR:");
		//serial_phex32(SPI0_MCR);
		//serial_print(", CTAR0:");
		//serial_phex32(SPI0_CTAR0);
		//serial_print("\n");
		return *this;
	}
	inline SPSRemulation & operator |= (int val) __attribute__((always_inline)) {
		//serial_print("SPSR |= ");
		//serial_phex(val);
		//serial_print("\n");
		if (val & (1<<SPI2X)) SPCRemulation::update_ctar(SPI0_CTAR0 |= SPI_CTAR_DBR);
		return *this;
	}
	inline SPSRemulation & operator &= (int val) __attribute__((always_inline)) {
		//serial_print("SPSR &= ");
		//serial_phex(val);
		//serial_print("\n");
		if (!(val & (1<<SPI2X))) SPCRemulation::update_ctar(SPI0_CTAR0 &= ~SPI_CTAR_DBR);
		return *this;
	}
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		//serial_print("SPSR & ");
		//serial_phex(val);
		//serial_print("\n");
		// TODO: using SPI_SR_TCF isn't quite right.  Control returns to the
		// caller after the final edge that captures data, which is 1/2 cycle
		// sooner than AVR returns.  At 500 kHz and slower SPI, this can make
		// a difference when digitalWrite is used to manually control the CS
		// pin, and perhaps it could matter at high clocks if faster register
		// access is used?  But does it really matter?  Do any SPI chips in
		// practice really perform differently if CS negates early, after the
		// final bit is clocked, but before the end of the whole clock cycle?
		if ((val & (1<<SPIF)) && (SPI0_SR & SPI_SR_TCF)) ret = (1<<SPIF);
		if ((val & (1<<SPI2X)) && (SPI0_CTAR0 & SPI_CTAR_DBR)) ret |= (1<<SPI2X);
		//delayMicroseconds(50000);
		return ret;
	}
	operator int () const __attribute__((always_inline)) {
		int ret = 0;
		//serial_print("SPSR (int)\n");
		if (SPI0_SR & SPI_SR_TCF) ret = (1<<SPIF);
		if (SPI0_CTAR0 & SPI_CTAR_DBR) ret |= (1<<SPI2X);
		return ret;
	}
};
extern SPSRemulation SPSR;

class SPDRemulation
{
public:
	inline SPDRemulation & operator = (int val) __attribute__((always_inline)) {
		//serial_print("SPDR = ");
		//serial_phex(val);
		//serial_print("\n");
		SPI0_MCR |= SPI_MCR_CLR_RXF; // discard any received data
		SPI0_SR = SPI_SR_TCF;
		//SPI0_SR = SPI_SR_EOQF;
		//SPI0_PUSHR = (val & 255) | SPI0_PUSHR_EOQ;
		SPI0_PUSHR = (val & 255);
		return *this;
	}
	operator int () const __attribute__((always_inline)) {
		uint32_t val;
		val = SPI0_POPR & 255;
		//serial_print("SPDR (int) ");
		//serial_phex(val);
		//serial_print("\n");
		return val;
	}
};
extern SPDRemulation SPDR;





#elif defined(KINETISL)

// SPI Control Register ­ SPCR
//#define SPIE	7	// SPI Interrupt Enable - not supported
//#define SPE	6	// SPI Enable
//#define DORD	5	// DORD: Data Order
//#define MSTR	4	// MSTR: Master/Slave Select
//#define CPOL	3	// CPOL: Clock Polarity
//#define CPHA	2	// CPHA: Clock Phase
//#define SPR1	1	// Clock: 3 = 125 kHz, 2 = 250 kHz, 1 = 1 MHz, 0->4 MHz
//#define SPR0	0
// SPI Status Register ­ SPSR
//#define SPIF	7	// SPIF: SPI Interrupt Flag
//#define WCOL	6	// WCOL: Write COLlision Flag - not implemented
//#define SPI2X	0	// SPI2X: Double SPI Speed Bit
// SPI Data Register ­ SPDR


class SPCRemulation
{
public:
	inline SPCRemulation & operator = (int val) __attribute__((always_inline)) {
		uint32_t sim4 = SIM_SCGC4;
		if (!(sim4 & SIM_SCGC4_SPI0)) {
			SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
			SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
		}
		uint32_t c1 = 0;
		if (val & (1<<DORD))  c1 |= SPI_C1_LSBFE;
		if (val & (1<<CPOL))  c1 |= SPI_C1_CPOL;
		if (val & (1<<CPHA))  c1 |= SPI_C1_CPHA;
		if (val & (1<<MSTR))  c1 |= SPI_C1_MSTR;
		if (val & (1<<SPE))   c1 |= SPI_C1_SPE;
		SPI0_C1 = c1;
		SPI0_C2 = 0;
		uint32_t br = SPI0_BR & 0x10;
		switch (val & 3) {
		  case 0:  SPI0_BR = br | SPI_BR_SPR(0); break;
		  case 1:  SPI0_BR = br | SPI_BR_SPR(2); break;
		  case 2:  SPI0_BR = br | SPI_BR_SPR(4); break;
		  default: SPI0_BR = br | SPI_BR_SPR(5); break;
		}
		if (val & (1<<SPE)) enable_pins();
		else disable_pins();
		return *this;
	}
	inline SPCRemulation & operator |= (int val) __attribute__((always_inline)) {
		uint32_t sim4 = SIM_SCGC4;
		if (!(sim4 & SIM_SCGC4_SPI0)) {
			SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
			SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
		}
		uint32_t c1 = SPI0_C1;
		if (val & (1<<DORD))  c1 |= SPI_C1_LSBFE;
		if (val & (1<<CPOL))  c1 |= SPI_C1_CPOL;
		if (val & (1<<CPHA))  c1 |= SPI_C1_CPHA;
		if (val & (1<<MSTR))  c1 |= SPI_C1_MSTR;
		if (val & (1<<SPE)) {
			enable_pins();
			c1 |= SPI_C1_SPE;
		}
		SPI0_C1 = c1;
		SPI0_C2 = 0;
		val &= 3;
		if (val) {
			uint32_t br = SPI0_BR;
			uint32_t bits = baud2avr(br) | val;
			br &= 0x10;
			switch (bits) {
			  case 0:  SPI0_BR = br | SPI_BR_SPR(0); break;
			  case 1:  SPI0_BR = br | SPI_BR_SPR(2); break;
			  case 2:  SPI0_BR = br | SPI_BR_SPR(4); break;
			  default: SPI0_BR = br | SPI_BR_SPR(5); break;
			}
		}
		return *this;
	}
	inline SPCRemulation & operator &= (int val) __attribute__((always_inline)) {
		uint32_t sim4 = SIM_SCGC4;
		if (!(sim4 & SIM_SCGC4_SPI0)) {
			SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
			SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
		}
		uint32_t c1 = SPI0_C1;
		if (!(val & (1<<DORD)))  c1 &= ~SPI_C1_LSBFE;
		if (!(val & (1<<CPOL)))  c1 &= ~SPI_C1_CPOL;
		if (!(val & (1<<CPHA)))  c1 &= ~SPI_C1_CPHA;
		if (!(val & (1<<MSTR)))  c1 &= ~SPI_C1_MSTR;
		if (!(val & (1<<SPE))) {
			disable_pins();
			c1 &= ~SPI_C1_SPE;
		}
		SPI0_C1 = c1;
		SPI0_C2 = 0;
		val &= 3;
		if (val < 3) {
			uint32_t br = SPI0_BR;
			uint32_t bits = baud2avr(br) & val;
			br &= 0x10;
			switch (bits) {
			  case 0:  SPI0_BR = br | SPI_BR_SPR(0); break;
			  case 1:  SPI0_BR = br | SPI_BR_SPR(2); break;
			  case 2:  SPI0_BR = br | SPI_BR_SPR(4); break;
			  default: SPI0_BR = br | SPI_BR_SPR(5); break;
			}
		}
		return *this;
	}
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		uint32_t sim4 = SIM_SCGC4;
		if (!(sim4 & SIM_SCGC4_SPI0)) {
			SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
			SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
		}
		uint32_t c1 = SPI0_C1;
		if ((val & (1<<DORD)) && (c1 & SPI_C1_LSBFE)) ret |= (1<<DORD);
		if ((val & (1<<CPOL)) && (c1 & SPI_C1_CPOL))  ret |= (1<<CPOL);
		if ((val & (1<<CPHA)) && (c1 & SPI_C1_CPHA))  ret |= (1<<CPHA);
		if ((val & (1<<MSTR)) && (c1 & SPI_C1_MSTR))  ret |= (1<<MSTR);
		if ((val & (1<<SPE))  && (c1 & SPI_C1_SPE))   ret |= (1<<SPE);
		uint32_t bits = baud2avr(SPI0_BR);
		if ((val & (1<<SPR1)) && (bits & (1<<SPR1)))  ret |= (1<<SPR1);
		if ((val & (1<<SPR0)) && (bits & (1<<SPR0)))  ret |= (1<<SPR0);
		return ret;
	}
	operator int () const __attribute__((always_inline)) {
		int ret = 0;
		uint32_t sim4 = SIM_SCGC4;
		if (!(sim4 & SIM_SCGC4_SPI0)) {
			SIM_SCGC4 = sim4 | SIM_SCGC4_SPI0;
			SPI0_BR = SPI_BR_SPR(0) | SPI_BR_SPPR(1);
		}
		uint32_t c1 = SPI0_C1;
		if ((c1 & SPI_C1_LSBFE)) ret |= (1<<DORD);
		if ((c1 & SPI_C1_CPOL))  ret |= (1<<CPOL);
		if ((c1 & SPI_C1_CPHA))  ret |= (1<<CPHA);
		if ((c1 & SPI_C1_MSTR))  ret |= (1<<MSTR);
		if ((c1 & SPI_C1_SPE))   ret |= (1<<SPE);
		ret |= baud2avr(SPI0_BR);
		return ret;
	}
	inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
		uint8_t newpinout = pinout;
		if (pin == 11) newpinout &= ~1;
		if (pin == 7) newpinout |= 1;
		if ((SIM_SCGC4 & SIM_SCGC4_SPI0) && newpinout != pinout) {
			if ((newpinout & 1) == 0) {
				CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
			} else {
				CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN7_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
	}
	inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
		uint8_t newpinout = pinout;
		if (pin == 12) newpinout &= ~2;
		if (pin == 8) newpinout |= 2;
		if ((SIM_SCGC4 & SIM_SCGC4_SPI0) && newpinout != pinout) {
			if ((newpinout & 2) == 0) {
				CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN12_CONFIG = PORT_PCR_MUX(2);
			} else {
				CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN8_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
	}
	inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
		uint8_t newpinout = pinout;
		if (pin == 13) newpinout &= ~4;
		if (pin == 14) newpinout |= 4;
		if ((SIM_SCGC4 & SIM_SCGC4_SPI0) && newpinout != pinout) {
			if ((newpinout & 4) == 0) {
				CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2);
			} else {
				CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
				CORE_PIN14_CONFIG = PORT_PCR_MUX(2);
			}
		}
		pinout = newpinout;
	}
	friend class SPSRemulation;
	friend class SPIFIFOclass;
private:
	static inline uint32_t baud2avr(uint32_t br) __attribute__((always_inline)) {
		br &= 15;
		if (br == 0) return 0;
		if (br <= 2) return 1;
		if (br <= 4) return 2;
		return 3;
	}
	static uint8_t pinout;
public:
	inline void enable_pins(void) __attribute__((always_inline)) {
		//serial_print("enable_pins\n");
		if ((pinout & 1) == 0) {
			CORE_PIN11_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // MOSI0 = 11 (PTC6)
		} else {
			CORE_PIN7_CONFIG = PORT_PCR_MUX(2); // MOSI0 = 7 (PTD2)
		}
		if ((pinout & 2) == 0) {
			CORE_PIN12_CONFIG = PORT_PCR_MUX(2);  // MISO0 = 12 (PTC7)
		} else {
			CORE_PIN8_CONFIG = PORT_PCR_MUX(2);  // MISO0 = 8 (PTD3)
		}
		if ((pinout & 4) == 0) {
			CORE_PIN13_CONFIG = PORT_PCR_DSE | PORT_PCR_MUX(2); // SCK0 = 13 (PTC5)
		} else {
			CORE_PIN14_CONFIG = PORT_PCR_MUX(2); // SCK0 = 14 (PTD1)
		}
	}
	inline void disable_pins(void) __attribute__((always_inline)) {
		//serial_print("disable_pins\n");
		if ((pinout & 1) == 0) {
			CORE_PIN11_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN7_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		}
		if ((pinout & 2) == 0) {
			CORE_PIN12_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN8_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		}
		if ((pinout & 4) == 0) {
			CORE_PIN13_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN14_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		}
	}
};
extern SPCRemulation SPCR;


class SPCR1emulation
{
public:
	inline void setMOSI(uint8_t pin) __attribute__((always_inline)) {
		if (pin == 0) pinout &= ~1; // MOSI1 = 0  (PTB16)
		if (pin == 21) pinout |= 1; // MOSI1 = 21 (PTD6)
	}
	inline void setMISO(uint8_t pin) __attribute__((always_inline)) {
		if (pin == 1) pinout &= ~2; // MISO1 = 1  (PTB17)
		if (pin == 5) pinout |= 2;  // MISO1 = 5  (PTD7)
	}
	inline void setSCK(uint8_t pin) __attribute__((always_inline)) {
		// SCK1 = 20 (PTD5) - no alternative pin
	}
	inline void enable_pins(void) __attribute__((always_inline)) {
		//serial_print("enable_pins\n");
		if ((pinout & 1) == 0) {
			CORE_PIN0_CONFIG = PORT_PCR_MUX(2);  // MOSI1 = 0  (PTB16)
		} else {
			CORE_PIN21_CONFIG = PORT_PCR_MUX(2); // MOSI1 = 21 (PTD6)
		}
		if ((pinout & 2) == 0) {
			CORE_PIN1_CONFIG = PORT_PCR_MUX(2);  // MISO1 = 1  (PTB17)
		} else {
			CORE_PIN5_CONFIG = PORT_PCR_MUX(2);  // MISO1 = 5  (PTD7)
		}
		CORE_PIN20_CONFIG = PORT_PCR_MUX(2); // SCK1 = 20 (PTD5)
	}
	inline void disable_pins(void) __attribute__((always_inline)) {
		//serial_print("disable_pins\n");
		if ((pinout & 1) == 0) {
			CORE_PIN0_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN21_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		}
		if ((pinout & 2) == 0) {
			CORE_PIN1_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		} else {
			CORE_PIN5_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
		}
		CORE_PIN20_CONFIG = PORT_PCR_SRE | PORT_PCR_MUX(1);
	}
	friend class SPIFIFO1class;
private:
	static uint8_t pinout;
};
extern SPCR1emulation SPCR1;


class SPSRemulation
{
public:
	inline SPSRemulation & operator = (int val) __attribute__((always_inline)) {
		if (val & (1<<SPI2X)) {
			SPI0_BR &= ~0x10;
		} else {
			SPI0_BR |= 0x10;
		}
		return *this;
	}
	inline SPSRemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & (1<<SPI2X)) SPI0_BR &= ~0x10;
		return *this;
	}
	inline SPSRemulation & operator &= (int val) __attribute__((always_inline)) {
		if (!(val & (1<<SPI2X))) SPI0_BR |= 0x10;
		return *this;
	}
	inline int operator & (int val) const __attribute__((always_inline)) {
		int ret = 0;
		if ((val & (1<<SPIF)) && (SPI0_S & SPI_S_SPRF)) ret = (1<<SPIF);
		if ((val & (1<<SPI2X)) && (!(SPI0_BR & 0x10))) ret |= (1<<SPI2X);
		return ret;
	}
	operator int () const __attribute__((always_inline)) {
		int ret = 0;
		if ((SPI0_S & SPI_S_SPRF)) ret = (1<<SPIF);
		if (!(SPI0_BR & 0x10)) ret |= (1<<SPI2X);
		return ret;
	}
};
extern SPSRemulation SPSR;


class SPDRemulation
{
public:
	inline SPDRemulation & operator = (int val) __attribute__((always_inline)) {
		if ((SPI0_S & SPI_S_SPTEF)) {
			uint32_t tmp __attribute__((unused)) = SPI0_DL;
		}
		SPI0_DL = val;
		return *this;
	}
	operator int () const __attribute__((always_inline)) {
		return SPI0_DL & 255;
	}
};
extern SPDRemulation SPDR;


#endif // KINETISK








class SREGemulation
{
public:
	operator int () const __attribute__((always_inline)) {
		uint32_t primask;
		asm volatile("mrs %0, primask\n" : "=r" (primask)::);
		if (primask) return 0;
		return (1<<7);
	}
	inline SREGemulation & operator = (int val) __attribute__((always_inline)) {
		if (val & (1<<7)) {
			__enable_irq();
		} else {
			__disable_irq();
		}
		return *this;
	}
};
extern SREGemulation SREG;


		// 22211
		// 84062840
		// 322111
		// 17395173
#if defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)

#if defined(__MK20DX128__) || defined(__MK20DX256__)
#define EIMSK_pA 0x01000018 // pins 3, 4, 24
#define EIMSK_pB 0x020F0003 // pins 0, 1, 16-19, 25
#define EIMSK_pC 0x78C0BE00 // pins 9-13, 15, 22, 23, 27-30
#define EIMSK_pD 0x003041E4 // pins 2, 5-8, 14, 20, 21
#define EIMSK_pE 0x84000000 // pins 26, 31
#elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
#define EIMSK_pA 0x1E000018 // pins 3, 4, 25-28
#define EIMSK_pB 0xE00F0003 // pins 0, 1, 16-19, 29-31
#define EIMSK_pC 0x00C0BE00 // pins 9-13, 15, 22, 23
#define EIMSK_pD 0x003041E4 // pins 2, 5-8, 14, 20, 21
#define EIMSK_pE 0x01000000 // pins 24
#endif

class EIMSKemulation  // used by Adafruit_nRF8001 (only supports INT for pins 0 to 31)
{
public:
	operator int () const __attribute__((always_inline)) {
		int mask = 0;
		volatile const uint32_t *icer = &NVIC_ICER0;
		if (icer[IRQ_PORTA >> 5] & (1 << (IRQ_PORTA & 31))) mask |= EIMSK_pA;
		if (icer[IRQ_PORTB >> 5] & (1 << (IRQ_PORTB & 31))) mask |= EIMSK_pB;
		if (icer[IRQ_PORTC >> 5] & (1 << (IRQ_PORTC & 31))) mask |= EIMSK_pC;
		if (icer[IRQ_PORTD >> 5] & (1 << (IRQ_PORTD & 31))) mask |= EIMSK_pD;
		if (icer[IRQ_PORTE >> 5] & (1 << (IRQ_PORTE & 31))) mask |= EIMSK_pE;
		return mask;
	}
	inline EIMSKemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & EIMSK_pA) NVIC_ENABLE_IRQ(IRQ_PORTA);
		if (val & EIMSK_pB) NVIC_ENABLE_IRQ(IRQ_PORTB);
		if (val & EIMSK_pC) NVIC_ENABLE_IRQ(IRQ_PORTC);
		if (val & EIMSK_pD) NVIC_ENABLE_IRQ(IRQ_PORTD);
		if (val & EIMSK_pE) NVIC_ENABLE_IRQ(IRQ_PORTE);
		return *this;
	}
	inline EIMSKemulation & operator &= (int val) __attribute__((always_inline)) {
		uint32_t n = val;
		if ((n | ~EIMSK_pA) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTA);
		if ((n | ~EIMSK_pB) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTB);
		if ((n | ~EIMSK_pC) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTC);
		if ((n | ~EIMSK_pD) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTD);
		if ((n | ~EIMSK_pE) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTE);
		return *this;
	}
};
extern EIMSKemulation EIMSK;

#elif defined(__MKL26Z64__)

#define EIMSK_pA 0x00000018 // pins 3, 4, 24
#define EIMSK_pC 0x00C0BE00 // pins 9-13, 15, 22, 23
#define EIMSK_pD 0x003041E4 // pins 2, 5-8, 14, 20, 21

class EIMSKemulation  // used by Adafruit_nRF8001
{
public:
	operator int () const __attribute__((always_inline)) {
		int mask = 0;
		volatile const uint32_t *icer = &NVIC_ICER0;
		if (icer[IRQ_PORTA >> 5] & (1 << (IRQ_PORTA & 31))) mask |= EIMSK_pA;
		if (icer[IRQ_PORTCD >> 5] & (1 << (IRQ_PORTCD & 31))) mask |= (EIMSK_pC | EIMSK_pD);
		return mask;
	}
	inline EIMSKemulation & operator |= (int val) __attribute__((always_inline)) {
		if (val & EIMSK_pA) NVIC_ENABLE_IRQ(IRQ_PORTA);
		if (val & (EIMSK_pC | EIMSK_pD)) NVIC_ENABLE_IRQ(IRQ_PORTCD);
		return *this;
	}
	inline EIMSKemulation & operator &= (int val) __attribute__((always_inline)) {
		uint32_t n = val;
		if ((n | ~EIMSK_pA) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTA);
		if ((n | ~(EIMSK_pC | EIMSK_pD)) != 0xFFFFFFFF) NVIC_DISABLE_IRQ(IRQ_PORTCD);
		return *this;
	}
};
extern EIMSKemulation EIMSK;

#endif


// these are not intended for public consumption...
#undef GPIO_BITBAND_ADDR
#undef CONFIG_PULLUP
#undef CONFIG_NOPULLUP
#undef GPIO_SETBIT_ATOMIC
#undef GPIO_CLRBIT_ATOMIC

#endif // __cplusplus

#endif