teensy-cores/teensy3/pins_arduino.h

/* Teensyduino Core Library
 * http://www.pjrc.com/teensy/
 * Copyright (c) 2013 PJRC.COM, LLC.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * 1. The above copyright notice and this permission notice shall be 
 * included in all copies or substantial portions of the Software.
 *
 * 2. If the Software is incorporated into a build system that allows 
 * selection among a list of target devices, then similar target
 * devices manufactured by PJRC.COM must be included in the list of
 * target devices and selectable in the same manner.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#ifndef pins_macros_for_arduino_compatibility_h
#define pins_macros_for_arduino_compatibility_h

#include <stdint.h>

const static uint8_t A0 = 14;
const static uint8_t A1 = 15;
const static uint8_t A2 = 16;
const static uint8_t A3 = 17;
const static uint8_t A4 = 18;
const static uint8_t A5 = 19;
const static uint8_t A6 = 20;
const static uint8_t A7 = 21;
const static uint8_t A8 = 22;
const static uint8_t A9 = 23;
const static uint8_t A10 = 34;
const static uint8_t A11 = 35;
const static uint8_t A12 = 36;
const static uint8_t A13 = 37;

const static uint8_t SS = 10;
const static uint8_t MOSI = 11;
const static uint8_t MISO = 12;
const static uint8_t SCK = 13;
const static uint8_t LED_BUILTIN = 13;
const static uint8_t SDA = 18;
const static uint8_t SCL = 19;


#define NUM_DIGITAL_PINS 34
#define NUM_ANALOG_INPUTS 14

#define analogInputToDigitalPin(p) (((p) < 10) ? (p) + 14 : -1)
#define digitalPinHasPWM(p) (((p) >= 3 && (p) <= 6) || (p) == 9 || (p) == 10 || ((p) >= 20 && (p) <= 23))

#define NOT_AN_INTERRUPT -1
#define digitalPinToInterrupt(p)  ((p) < NUM_DIGITAL_PINS ? (p) : -1)

struct digital_pin_bitband_and_config_table_struct {
        volatile uint32_t *reg;
        volatile uint32_t *config;
};
extern const struct digital_pin_bitband_and_config_table_struct digital_pin_to_info_PGM[];

// compatibility macros
#define digitalPinToPort(pin) (pin)
#define digitalPinToBitMask(pin) (1)
#define portOutputRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 0))
#define portSetRegister(pin)    ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 32))
#define portClearRegister(pin)  ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 64))
#define portToggleRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 96))
#define portInputRegister(pin)  ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 128))
#define portModeRegister(pin)   ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 160))
#define portConfigRegister(pin) ((volatile uint32_t *)(digital_pin_to_info_PGM[(pin)].config))


#define digitalPinToPortReg(pin) (portOutputRegister(pin))
#define digitalPinToBit(pin) (1)


#define NOT_ON_TIMER 0
static inline uint8_t digitalPinToTimer(uint8_t) __attribute__((always_inline, unused));
static inline uint8_t digitalPinToTimer(uint8_t pin)
{
	if (pin >= 3 && pin <= 6) return pin - 2;
	if (pin >= 9 && pin <= 10) return pin - 4;
	if (pin >= 20 && pin <= 23) return pin - 13;
	return NOT_ON_TIMER;
}




#endif