(MKL26Z64) update for F_PLL <= 16MHz

teensy3/HardwareSerial.h

@@ -90,7 +90,15 @@
 #define BAUD2DIV2(baud) (((F_CPU * 2) + ((baud) >> 1)) / (baud))
 #define BAUD2DIV3(baud) (((F_BUS * 2) + ((baud) >> 1)) / (baud))
 #elif defined(KINETISL)
+
+#if F_CPU <= 2000000
+#define BAUD2DIV(baud)  (((F_PLL / 16 ) + ((baud) >> 1)) / (baud))
+#elif F_CPU <= 16000000
+#define BAUD2DIV(baud)  (((F_PLL / (F_PLL / 1000000)) + ((baud) >> 1)) / (baud))
+#else
 #define BAUD2DIV(baud)  (((F_PLL / 2 / 16) + ((baud) >> 1)) / (baud))
+#endif
+
 #define BAUD2DIV2(baud) (((F_BUS / 16) + ((baud) >> 1)) / (baud))
 #define BAUD2DIV3(baud) (((F_BUS / 16) + ((baud) >> 1)) / (baud))
 #endif

teensy3/kinetis.h

@@ -249,15 +249,15 @@ enum IRQ_NUMBER_t {
  #define F_BUS 24000000
  #define F_MEM 24000000
 #elif (F_CPU == 16000000)
- #define F_PLL 96000000
+ #define F_PLL 16000000
  #define F_BUS 16000000
  #define F_MEM 16000000
 #elif (F_CPU == 8000000)
- #define F_PLL 96000000
+ #define F_PLL 8000000
  #define F_BUS 8000000
  #define F_MEM 8000000
 #elif (F_CPU == 4000000)
- #define F_PLL 96000000
+ #define F_PLL 4000000
  #define F_BUS 4000000
  #define F_MEM 4000000
 #elif (F_CPU == 2000000)

teensy3/mk20dx128.c

@@ -530,8 +530,12 @@ void ResetHandler(void)
 // MCG_SC[FCDIV] defaults to divide by two for internal ref clock
 // I tried changing MSG_SC to divide by 1, it didn't work for me
 #if F_CPU <= 2000000
+    #if defined(KINETISK)
+    MCG_C1 = MCG_C1_CLKS(1) | MCG_C1_IREFS;
+    #elif defined(KINETISL)
 	// use the internal oscillator
-	MCG_C1 = MCG_C1_CLKS(1) | MCG_C1_IREFS;
+	MCG_C1 = MCG_C1_CLKS(1) | MCG_C1_IREFS | MCG_C1_IRCLKEN;
+    #endif
 	// wait for MCGOUT to use oscillator
 	while ((MCG_S & MCG_S_CLKST_MASK) != MCG_S_CLKST(1)) ;
 	for (n=0; n<10; n++) ; // TODO: why do we get 2 mA extra without this delay?
@@ -550,7 +554,7 @@ void ResetHandler(void)
 	//  C2[LP] bit is written to 1
 #else
 	// enable capacitors for crystal
-	OSC0_CR = OSC_SC8P | OSC_SC2P;
+	OSC0_CR = OSC_SC8P | OSC_SC2P | 0x80;
 	// enable osc, 8-32 MHz range, low power mode
 	MCG_C2 = MCG_C2_RANGE0(2) | MCG_C2_EREFS;
 	// switch to crystal as clock source, FLL input = 16 MHz / 512
@@ -639,23 +643,39 @@ void ResetHandler(void)
 	#endif
 #elif F_CPU == 16000000
 	// config divisors: 16 MHz core, 16 MHz bus, 16 MHz flash
-	SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) |	 SIM_CLKDIV1_OUTDIV4(0);
+#if defined(KINETISK)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) |	 SIM_CLKDIV1_OUTDIV4(0);
+#elif defined(KINETISL)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV4(0);
+#endif
 #elif F_CPU == 8000000
 	// config divisors: 8 MHz core, 8 MHz bus, 8 MHz flash
-	SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(1) | SIM_CLKDIV1_OUTDIV2(1) |	 SIM_CLKDIV1_OUTDIV4(1);
+#if defined(KINETISK)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(1) | SIM_CLKDIV1_OUTDIV2(1) |	 SIM_CLKDIV1_OUTDIV4(1);
+#elif defined(KINETISL)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(1) | SIM_CLKDIV1_OUTDIV4(1);
+#endif
 #elif F_CPU == 4000000
     // config divisors: 4 MHz core, 4 MHz bus, 2 MHz flash
     // since we are running from external clock 16MHz
     // fix outdiv too -> cpu 16/4, bus 16/4, flash 16/4
     // here we can go into vlpr?
 	// config divisors: 4 MHz core, 4 MHz bus, 4 MHz flash
-	SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(3) | SIM_CLKDIV1_OUTDIV2(3) |	 SIM_CLKDIV1_OUTDIV4(3);
+#if defined(KINETISK)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(3) | SIM_CLKDIV1_OUTDIV2(3) |	 SIM_CLKDIV1_OUTDIV4(3);
+#elif defined(KINETISL)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(3) | SIM_CLKDIV1_OUTDIV4(3);
+#endif
 #elif F_CPU == 2000000
     // since we are running from the fast internal reference clock 4MHz
     // but is divided down by 2 so we actually have a 2MHz, MCG_SC[FCDIV] default is 2
     // fix outdiv -> cpu 2/1, bus 2/1, flash 2/2
 	// config divisors: 2 MHz core, 2 MHz bus, 1 MHz flash
-	SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) |	 SIM_CLKDIV1_OUTDIV4(1);
+#if defined(KINETISK)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) |	 SIM_CLKDIV1_OUTDIV4(1);
+#elif defined(KINETISL)
+    SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV4(1);
+#endif
 #else
 #error "Error, F_CPU must be 168, 144, 120, 96, 72, 48, 24, 16, 8, 4, or 2 MHz"
 #endif
@@ -675,7 +695,13 @@ void ResetHandler(void)
 		| SIM_SOPT2_UART0SRC(1) | SIM_SOPT2_TPMSRC(1);
 	#endif
 #else
-	SIM_SOPT2 = SIM_SOPT2_TRACECLKSEL | SIM_SOPT2_CLKOUTSEL(3);
+    
+#if F_CPU == 2000000
+	SIM_SOPT2 = SIM_SOPT2_TRACECLKSEL | SIM_SOPT2_CLKOUTSEL(4) | SIM_SOPT2_UART0SRC(3);
+#else
+    SIM_SOPT2 = SIM_SOPT2_TRACECLKSEL | SIM_SOPT2_CLKOUTSEL(6) | SIM_SOPT2_UART0SRC(2);
+#endif
+    
 #endif
 
 #if F_CPU <= 2000000

teensy3/pins_teensy.c

@@ -391,7 +391,13 @@ extern void usb_init(void);
 #if defined(KINETISK)
 #define F_TIMER F_BUS
 #elif defined(KINETISL)
+
+#if F_CPU > 16000000
 #define F_TIMER (F_PLL/2)
+#else 
+#define F_TIMER (F_PLL)
+#endif//Low Power
+
 #endif
 
 #if F_TIMER == 60000000

teensy3/serial1.c

@@ -107,7 +107,7 @@ void serial_begin(uint32_t divisor)
 	UART0_C1 = 0;
 	UART0_PFIFO = 0;
 #endif
-#elif defined(KINETISL_UART1)
+#elif defined(KINETISL_UART0)
 	UART0_BDH = (divisor >> 8) & 0x1F;
 	UART0_BDL = divisor & 0xFF;
 	UART0_C1 = 0;