Beta Board names Change

teensy3/serial2.c

@@ -186,13 +186,13 @@ void serial2_end(void)
 	UART1_C2 = 0;
 	switch (rx_pin_num) {
 		case 9: CORE_PIN9_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTC3
-		#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.4 or T3.5
+		#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.5 or T3.6
 		case 26: CORE_PIN26_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTE1
 		#endif
 	}
 	switch (tx_pin_num & 127) {
 		case 10: CORE_PIN10_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTC4
-		#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.4 or T3.5
+		#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.5 or T3.6
 		case 31: CORE_PIN31_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTE0
 		#endif
 	}
@@ -222,7 +222,7 @@ void serial2_set_tx(uint8_t pin, uint8_t opendrain)
 	if ((SIM_SCGC4 & SIM_SCGC4_UART1)) {
 		switch (tx_pin_num & 127) {
 			case 10: CORE_PIN10_CONFIG = 0; break; // PTC4
-			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.4 or T3.5
+			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.5 or T3.6
 			case 31: CORE_PIN31_CONFIG = 0; break; // PTE0
 			#endif
 		}
@@ -233,7 +233,7 @@ void serial2_set_tx(uint8_t pin, uint8_t opendrain)
 		}
 		switch (pin & 127) {
 			case 10: CORE_PIN10_CONFIG = cfg | PORT_PCR_MUX(3); break;
-			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.4 or T3.5
+			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.5 or T3.6
 			case 31: CORE_PIN31_CONFIG = cfg | PORT_PCR_MUX(3); break;
 			#endif
 		}
@@ -249,13 +249,13 @@ void serial2_set_rx(uint8_t pin)
 	if ((SIM_SCGC4 & SIM_SCGC4_UART1)) {
 		switch (rx_pin_num) {
 			case 9: CORE_PIN9_CONFIG = 0; break; // PTC3
-			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.4 or T3.5
+			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.5 or T3.6
 			case 26: CORE_PIN26_CONFIG = 0; break; // PTE1
 			#endif
 		}
 		switch (pin) {
 			case 9: CORE_PIN9_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
-			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.4 or T3.5
+			#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__))  // not on T3.5 or T3.6
 			case 26: CORE_PIN26_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
 			#endif
 		}