visus
/
teensy-cores
Слідкувати 1
В обрані 0
Форк 0
Код Проблеми 0 Запити на злиття 0 Релізи 0 Вікі Активність
Переглянути джерело

Merge pull request #319 from KurtE/T4_SerialX_Split_Objects 

T4 serial x split objects
main
Paul Stoffregen 5 роки тому
джерело
11161f7ca1 abe9784408
коміт
18d7da7a52
Аккаунт користувача з таким Email не знайдено
11 змінених файлів з 665 додано та 262 видалено
Розділений перегляд Показати статистику Diff
  1. +38
    -251
      teensy4/HardwareSerial.cpp
  2. +21
    -1
      teensy4/HardwareSerial.h
  3. +73
    -0
      teensy4/HardwareSerial1.cpp
  4. +76
    -0
      teensy4/HardwareSerial2.cpp
  5. +74
    -0
      teensy4/HardwareSerial3.cpp
  6. +75
    -0
      teensy4/HardwareSerial4.cpp
  7. +76
    -0
      teensy4/HardwareSerial5.cpp
  8. +77
    -0
      teensy4/HardwareSerial6.cpp
  9. +76
    -0
      teensy4/HardwareSerial7.cpp
  10. +75
    -0
      teensy4/HardwareSerial8.cpp
  11. +4
    -10
      teensy4/yield.cpp

+ 38
- 251
teensy4/HardwareSerial.cpp Переглянути файл

@@ -1,6 +1,6 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2017 PJRC.COM, LLC.
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@@ -62,58 +62,9 @@

#define UART_CLOCK 24000000

#ifndef SERIAL1_TX_BUFFER_SIZE
#define SERIAL1_TX_BUFFER_SIZE 64 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL1_RX_BUFFER_SIZE
#define SERIAL1_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif

#ifndef SERIAL2_TX_BUFFER_SIZE
#define SERIAL2_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL2_RX_BUFFER_SIZE
#define SERIAL2_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#ifndef SERIAL3_TX_BUFFER_SIZE
#define SERIAL3_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL3_RX_BUFFER_SIZE
#define SERIAL3_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#ifndef SERIAL4_TX_BUFFER_SIZE
#define SERIAL4_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL4_RX_BUFFER_SIZE
#define SERIAL4_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif

#ifndef SERIAL5_TX_BUFFER_SIZE
#define SERIAL5_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL5_RX_BUFFER_SIZE
#define SERIAL5_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#ifndef SERIAL6_TX_BUFFER_SIZE
#define SERIAL6_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL6_RX_BUFFER_SIZE
#define SERIAL6_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#ifndef SERIAL7_TX_BUFFER_SIZE
#define SERIAL7_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL7_RX_BUFFER_SIZE
#define SERIAL7_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#ifndef SERIAL8_TX_BUFFER_SIZE
#define SERIAL8_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL8_RX_BUFFER_SIZE
#define SERIAL8_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif

#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest
SerialEventCheckingFunctionPointer HardwareSerial::serial_event_handler_checks[8] = {nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr};
uint8_t HardwareSerial::serial_event_handlers_active = 0;


#define CTRL_ENABLE (LPUART_CTRL_TE | LPUART_CTRL_RE | LPUART_CTRL_RIE | LPUART_CTRL_ILIE)
#define CTRL_TX_ACTIVE (CTRL_ENABLE | LPUART_CTRL_TIE)
@@ -230,11 +181,11 @@ void HardwareSerial::begin(uint32_t baud, uint16_t format)
if (format & 0x10) c |= LPUART_STAT_RXINV; // rx invert
port->STAT = c;


// bit 8 can turn on 2 stop bit mote
if ( format & 0x100) port->BAUD |= LPUART_BAUD_SBNS;

//Serial.printf(" stat:%x ctrl:%x fifo:%x water:%x\n", port->STAT, port->CTRL, port->FIFO, port->WATER );
enableSerialEvents(); // Enable the processing of serialEvent for this object
};

inline void HardwareSerial::rts_assert()
@@ -250,7 +201,21 @@ inline void HardwareSerial::rts_deassert()

void HardwareSerial::end(void)
{
if (!(hardware->ccm_register & hardware->ccm_value)) return;
while (transmitting_) yield(); // wait for buffered data to send
port->CTRL = 0; // disable the TX and RX ...

// Not sure if this is best, but I think most IO pins default to Mode 5? which appears to be digital IO?
*(portConfigRegister(hardware->rx_pin)) = 5;
*(portConfigRegister(hardware->tx_pin)) = 5;


// Might need to clear out other areas as well?
rx_buffer_head_ = 0;
rx_buffer_tail_ = 0;
if (rts_pin_baseReg_) rts_deassert();
//
disableSerialEvents(); // disable the processing of serialEvent for this object
}

void HardwareSerial::transmitterEnable(uint8_t pin)
@@ -536,209 +501,31 @@ void HardwareSerial::IRQHandler()
//digitalWrite(4, LOW);
}

void IRQHandler_Serial1()
{
Serial1.IRQHandler();
}

void IRQHandler_Serial2()
{
Serial2.IRQHandler();
}

void IRQHandler_Serial3()
{
Serial3.IRQHandler();
}

void IRQHandler_Serial4()
{
Serial4.IRQHandler();
}

void IRQHandler_Serial5()
{
Serial5.IRQHandler();
}

void IRQHandler_Serial6()
void HardwareSerial::processSerialEvents()
{
Serial6.IRQHandler();
if (!serial_event_handlers_active) return; // bail quick if no one processing SerialEvents.
uint8_t handlers_still_to_process = serial_event_handlers_active;
for (uint8_t i = 0; i < 8; i++) {
if (serial_event_handler_checks[i]) {
(*serial_event_handler_checks[i])();
if (--handlers_still_to_process == 0) return;
}
}
}

void IRQHandler_Serial7()
void HardwareSerial::enableSerialEvents()
{
Serial7.IRQHandler();
if (!serial_event_handler_checks[hardware->serial_index]) {
serial_event_handler_checks[hardware->serial_index] = hardware->serial_event_handler_check; // clear it out
serial_event_handlers_active++;
}
}

void IRQHandler_Serial8()
void HardwareSerial::disableSerialEvents()
{
Serial8.IRQHandler();
if (serial_event_handler_checks[hardware->serial_index]) {
serial_event_handler_checks[hardware->serial_index] = nullptr; // clear it out
serial_event_handlers_active--;
}
}




// Serial1
static BUFTYPE tx_buffer1[SERIAL1_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer1[SERIAL1_RX_BUFFER_SIZE];

const HardwareSerial::hardware_t UART6_Hardware = {
IRQ_LPUART6, &IRQHandler_Serial1,
CCM_CCGR3, CCM_CCGR3_LPUART6(CCM_CCGR_ON),
0, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03, // pin 0
1, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02, // pin 1
0xff, // No CTS pin
IOMUXC_LPUART6_RX_SELECT_INPUT,
2, // page 473
2, // page 472
0, // No CTS
1, // page 861
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial1(&IMXRT_LPUART6, &UART6_Hardware, tx_buffer1, SERIAL1_TX_BUFFER_SIZE,
rx_buffer1, SERIAL1_RX_BUFFER_SIZE);

// Serial2
static BUFTYPE tx_buffer2[SERIAL2_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer2[SERIAL2_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART4_Hardware = {
IRQ_LPUART4, &IRQHandler_Serial2,
CCM_CCGR1, CCM_CCGR1_LPUART4(CCM_CCGR_ON),
6, //IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01, // pin 6
7, // IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00, // pin 7
0xff, // No CTS pin
IOMUXC_LPUART4_RX_SELECT_INPUT,
2, // page 521
2, // page 520
0, // No CTS
2, // page 858
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial2(&IMXRT_LPUART4, &UART4_Hardware, tx_buffer2, SERIAL2_TX_BUFFER_SIZE,
rx_buffer2, SERIAL2_RX_BUFFER_SIZE);

// Serial3
static BUFTYPE tx_buffer3[SERIAL3_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer3[SERIAL3_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART2_Hardware = {
IRQ_LPUART2, &IRQHandler_Serial3,
CCM_CCGR0, CCM_CCGR0_LPUART2(CCM_CCGR_ON),
15, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03, // pin 15
14, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02, // pin 14
18, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01, // 18
IOMUXC_LPUART2_RX_SELECT_INPUT,
2, // page 491
2, // page 490
2, // page 473
1, // Page 855
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial3(&IMXRT_LPUART2, &UART2_Hardware,tx_buffer3, SERIAL3_TX_BUFFER_SIZE,
rx_buffer3, SERIAL3_RX_BUFFER_SIZE);

// Serial4
static BUFTYPE tx_buffer4[SERIAL4_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer4[SERIAL4_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART3_Hardware = {
IRQ_LPUART3, &IRQHandler_Serial4,
CCM_CCGR0, CCM_CCGR0_LPUART3(CCM_CCGR_ON),
16, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07, // pin 16
17, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06, // pin 17
0xff, // No CTS pin
IOMUXC_LPUART3_RX_SELECT_INPUT,
2, // page 495
2, // page 494
0, // No CTS
0, // Page 857
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial4(&IMXRT_LPUART3, &UART3_Hardware, tx_buffer4, SERIAL4_TX_BUFFER_SIZE,
rx_buffer4, SERIAL4_RX_BUFFER_SIZE);

// Serial5
static BUFTYPE tx_buffer5[SERIAL5_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer5[SERIAL5_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART8_Hardware = {
IRQ_LPUART8, &IRQHandler_Serial5,
CCM_CCGR6, CCM_CCGR6_LPUART8(CCM_CCGR_ON),
21, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11, // pin 21
20, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10, // pin 20
0xff, // No CTS pin
IOMUXC_LPUART8_RX_SELECT_INPUT,
2, // page 499
2, // page 498
0, // No CTS
1, // Page 864-5
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial5(&IMXRT_LPUART8, &UART8_Hardware, tx_buffer5, SERIAL5_TX_BUFFER_SIZE,
rx_buffer5, SERIAL5_RX_BUFFER_SIZE);

// Serial6
static BUFTYPE tx_buffer6[SERIAL6_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer6[SERIAL6_RX_BUFFER_SIZE];
uint32_t IOMUXC_LPUART1_RX_SELECT_INPUT; // bugbug - does not exist so hack

static HardwareSerial::hardware_t UART1_Hardware = {
IRQ_LPUART1, &IRQHandler_Serial6,
CCM_CCGR5, CCM_CCGR5_LPUART1(CCM_CCGR_ON),
25, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13, // pin 25
24, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12, // pin 24
0xff, // No CTS pin
IOMUXC_LPUART1_RX_SELECT_INPUT,
2, // page 486
2, // page 485
0, // No CTS
0, // ??? Does not have one ???
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark

};
HardwareSerial Serial6(&IMXRT_LPUART1, &UART1_Hardware, tx_buffer6, SERIAL6_TX_BUFFER_SIZE,
rx_buffer6, SERIAL6_RX_BUFFER_SIZE);

// Serial7
static BUFTYPE tx_buffer7[SERIAL7_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer7[SERIAL7_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART7_Hardware = {
IRQ_LPUART7, &IRQHandler_Serial7,
CCM_CCGR5, CCM_CCGR5_LPUART7(CCM_CCGR_ON),
28, //IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32, // pin 28
29, //IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31, // pin 29
0xff, // No CTS pin
IOMUXC_LPUART7_RX_SELECT_INPUT,
2, // page 458
2, // page 457
0, // No CTS
1, // Page 863

IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial7(&IMXRT_LPUART7, &UART7_Hardware, tx_buffer7, SERIAL7_TX_BUFFER_SIZE,
rx_buffer7, SERIAL7_RX_BUFFER_SIZE);

// Serial8
static BUFTYPE tx_buffer8[SERIAL8_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer8[SERIAL8_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART5_Hardware = {
IRQ_LPUART5, &IRQHandler_Serial8,
CCM_CCGR3, CCM_CCGR3_LPUART5(CCM_CCGR_ON),
30, //IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24, // pin 30
31, // IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_23, // pin 31
0xff, // No CTS pin
IOMUXC_LPUART5_RX_SELECT_INPUT,
2, // page 450
2, // page 449
0, // No CTS
0,
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial8(&IMXRT_LPUART5, &UART5_Hardware, tx_buffer8, SERIAL8_TX_BUFFER_SIZE,
rx_buffer8, SERIAL8_RX_BUFFER_SIZE);


+ 21
- 1
teensy4/HardwareSerial.h Переглянути файл

@@ -123,12 +123,16 @@ extern "C" {
extern void IRQHandler_Serial8();
}

typedef void(*SerialEventCheckingFunctionPointer)();

class HardwareSerial : public Stream
{
public:
typedef struct {
uint8_t serial_index; // which object are we? 0 based
IRQ_NUMBER_t irq;
void (*irq_handler)(void);
void (*serial_event_handler_check)(void);
volatile uint32_t &ccm_register;
const uint32_t ccm_value;
const uint8_t rx_pin;
@@ -170,6 +174,11 @@ public:
void addStorageForRead(void *buffer, size_t length);
void addStorageForWrite(void *buffer, size_t length);
size_t write9bit(uint32_t c);
// Event Handler functions and data
void enableSerialEvents();
void disableSerialEvents();
static void processSerialEvents();

using Print::write;
// Only overwrite some of the virtualWrite functions if we are going to optimize them over Print version
@@ -221,6 +230,10 @@ private:
friend void IRQHandler_Serial7();
friend void IRQHandler_Serial8();

static SerialEventCheckingFunctionPointer serial_event_handler_checks[8];
static uint8_t serial_event_handlers_active;



};
extern HardwareSerial Serial1;
@@ -231,7 +244,14 @@ extern HardwareSerial Serial5;
extern HardwareSerial Serial6;
extern HardwareSerial Serial7;
extern HardwareSerial Serial8;
//extern void serialEvent1(void);
extern void serialEvent1(void);
extern void serialEvent2(void);
extern void serialEvent3(void);
extern void serialEvent4(void);
extern void serialEvent5(void);
extern void serialEvent6(void);
extern void serialEvent7(void);
extern void serialEvent8(void);


#endif // __cplusplus

+ 73
- 0
teensy4/HardwareSerial1.cpp Переглянути файл

@@ -0,0 +1,73 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL1_TX_BUFFER_SIZE
#define SERIAL1_TX_BUFFER_SIZE 64 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL1_RX_BUFFER_SIZE
#define SERIAL1_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest

void IRQHandler_Serial1()
{
Serial1.IRQHandler();
}

void serial_event_check_serial1()
{
if (Serial1.available()) serialEvent1();
}

// Serial1
static BUFTYPE tx_buffer1[SERIAL1_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer1[SERIAL1_RX_BUFFER_SIZE];

const HardwareSerial::hardware_t UART6_Hardware = {
0, IRQ_LPUART6, &IRQHandler_Serial1, &serial_event_check_serial1,
CCM_CCGR3, CCM_CCGR3_LPUART6(CCM_CCGR_ON),
0, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_03, // pin 0
1, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_02, // pin 1
0xff, // No CTS pin
IOMUXC_LPUART6_RX_SELECT_INPUT,
2, // page 473
2, // page 472
0, // No CTS
1, // page 861
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial1(&IMXRT_LPUART6, &UART6_Hardware, tx_buffer1, SERIAL1_TX_BUFFER_SIZE,
rx_buffer1, SERIAL1_RX_BUFFER_SIZE);

void serialEvent1() __attribute__((weak));
void serialEvent1() {Serial1.disableSerialEvents(); } // No use calling this so disable if called...

+ 76
- 0
teensy4/HardwareSerial2.cpp Переглянути файл

@@ -0,0 +1,76 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL2_TX_BUFFER_SIZE
#define SERIAL2_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL2_RX_BUFFER_SIZE
#define SERIAL2_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest


void IRQHandler_Serial2()
{
Serial2.IRQHandler();
}

void serial_event_check_serial2()
{
if (Serial2.available()) serialEvent2();
}


// Serial2
static BUFTYPE tx_buffer2[SERIAL2_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer2[SERIAL2_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART4_Hardware = {
1, IRQ_LPUART4, &IRQHandler_Serial2, &serial_event_check_serial2,
CCM_CCGR1, CCM_CCGR1_LPUART4(CCM_CCGR_ON),
6, //IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_01, // pin 6
7, // IOMUXC_SW_MUX_CTL_PAD_GPIO_B1_00, // pin 7
0xff, // No CTS pin
IOMUXC_LPUART4_RX_SELECT_INPUT,
2, // page 521
2, // page 520
0, // No CTS
2, // page 858
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial2(&IMXRT_LPUART4, &UART4_Hardware, tx_buffer2, SERIAL2_TX_BUFFER_SIZE,
rx_buffer2, SERIAL2_RX_BUFFER_SIZE);


void serialEvent2() __attribute__((weak));
void serialEvent2() {Serial2.disableSerialEvents(); } // No use calling this so disable if called...

+ 74
- 0
teensy4/HardwareSerial3.cpp Переглянути файл

@@ -0,0 +1,74 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL3_TX_BUFFER_SIZE
#define SERIAL3_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL3_RX_BUFFER_SIZE
#define SERIAL3_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest

void IRQHandler_Serial3()
{
Serial3.IRQHandler();
}

void serial_event_check_serial3()
{
if (Serial3.available()) serialEvent3();
}

// Serial3
static BUFTYPE tx_buffer3[SERIAL3_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer3[SERIAL3_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART2_Hardware = {
2, IRQ_LPUART2, &IRQHandler_Serial3, &serial_event_check_serial3,
CCM_CCGR0, CCM_CCGR0_LPUART2(CCM_CCGR_ON),
15, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_03, // pin 15
14, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_02, // pin 14
18, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_01, // 18
IOMUXC_LPUART2_RX_SELECT_INPUT,
2, // page 491
2, // page 490
2, // page 473
1, // Page 855
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial3(&IMXRT_LPUART2, &UART2_Hardware,tx_buffer3, SERIAL3_TX_BUFFER_SIZE,
rx_buffer3, SERIAL3_RX_BUFFER_SIZE);

void serialEvent3() __attribute__((weak));
void serialEvent3() {Serial3.disableSerialEvents(); } // No use calling this so disable if called...


+ 75
- 0
teensy4/HardwareSerial4.cpp Переглянути файл

@@ -0,0 +1,75 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL4_TX_BUFFER_SIZE
#define SERIAL4_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL4_RX_BUFFER_SIZE
#define SERIAL4_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest


void IRQHandler_Serial4()
{
Serial4.IRQHandler();
}

void serial_event_check_serial4()
{
if (Serial4.available()) serialEvent4();
}

// Serial4
static BUFTYPE tx_buffer4[SERIAL4_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer4[SERIAL4_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART3_Hardware = {
3, IRQ_LPUART3, &IRQHandler_Serial4, &serial_event_check_serial4,
CCM_CCGR0, CCM_CCGR0_LPUART3(CCM_CCGR_ON),
16, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_07, // pin 16
17, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_06, // pin 17
0xff, // No CTS pin
IOMUXC_LPUART3_RX_SELECT_INPUT,
2, // page 495
2, // page 494
0, // No CTS
0, // Page 857
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial4(&IMXRT_LPUART3, &UART3_Hardware, tx_buffer4, SERIAL4_TX_BUFFER_SIZE,
rx_buffer4, SERIAL4_RX_BUFFER_SIZE);


void serialEvent4() __attribute__((weak));
void serialEvent4() {Serial4.disableSerialEvents(); } // No use calling this so disable if called...

+ 76
- 0
teensy4/HardwareSerial5.cpp Переглянути файл

@@ -0,0 +1,76 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL5_TX_BUFFER_SIZE
#define SERIAL5_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL5_RX_BUFFER_SIZE
#define SERIAL5_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest


void IRQHandler_Serial5()
{
Serial5.IRQHandler();
}

void serial_event_check_serial5()
{
if (Serial5.available()) serialEvent5();
}

// Serial5
static BUFTYPE tx_buffer5[SERIAL5_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer5[SERIAL5_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART8_Hardware = {
4, IRQ_LPUART8, &IRQHandler_Serial5, &serial_event_check_serial5,
CCM_CCGR6, CCM_CCGR6_LPUART8(CCM_CCGR_ON),
21, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_11, // pin 21
20, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B1_10, // pin 20
0xff, // No CTS pin
IOMUXC_LPUART8_RX_SELECT_INPUT,
2, // page 499
2, // page 498
0, // No CTS
1, // Page 864-5
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial5(&IMXRT_LPUART8, &UART8_Hardware, tx_buffer5, SERIAL5_TX_BUFFER_SIZE,
rx_buffer5, SERIAL5_RX_BUFFER_SIZE);



void serialEvent5() __attribute__((weak));
void serialEvent5() {Serial5.disableSerialEvents(); } // No use calling this so disable if called...

+ 77
- 0
teensy4/HardwareSerial6.cpp Переглянути файл

@@ -0,0 +1,77 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL6_TX_BUFFER_SIZE
#define SERIAL6_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL6_RX_BUFFER_SIZE
#define SERIAL6_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest

void IRQHandler_Serial6()
{
Serial6.IRQHandler();
}

void serial_event_check_serial6()
{
if (Serial6.available()) serialEvent6();
}


// Serial6
static BUFTYPE tx_buffer6[SERIAL6_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer6[SERIAL6_RX_BUFFER_SIZE];
uint32_t IOMUXC_LPUART1_RX_SELECT_INPUT; // bugbug - does not exist so hack

static HardwareSerial::hardware_t UART1_Hardware = {
5, IRQ_LPUART1, &IRQHandler_Serial6, &serial_event_check_serial6,
CCM_CCGR5, CCM_CCGR5_LPUART1(CCM_CCGR_ON),
25, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_13, // pin 25
24, //IOMUXC_SW_MUX_CTL_PAD_GPIO_AD_B0_12, // pin 24
0xff, // No CTS pin
IOMUXC_LPUART1_RX_SELECT_INPUT,
2, // page 486
2, // page 485
0, // No CTS
0, // ??? Does not have one ???
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark

};

HardwareSerial Serial6(&IMXRT_LPUART1, &UART1_Hardware, tx_buffer6, SERIAL6_TX_BUFFER_SIZE,
rx_buffer6, SERIAL6_RX_BUFFER_SIZE);

void serialEvent6() __attribute__((weak));
void serialEvent6() {Serial6.disableSerialEvents(); } // No use calling this so disable if called...

+ 76
- 0
teensy4/HardwareSerial7.cpp Переглянути файл

@@ -0,0 +1,76 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL7_TX_BUFFER_SIZE
#define SERIAL7_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL7_RX_BUFFER_SIZE
#define SERIAL7_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest

void IRQHandler_Serial7()
{
Serial7.IRQHandler();
}

void serial_event_check_serial7()
{
if (Serial7.available()) serialEvent7();
}


// Serial7
static BUFTYPE tx_buffer7[SERIAL7_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer7[SERIAL7_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART7_Hardware = {
6, IRQ_LPUART7, &IRQHandler_Serial7, &serial_event_check_serial7,
CCM_CCGR5, CCM_CCGR5_LPUART7(CCM_CCGR_ON),
28, //IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32, // pin 28
29, //IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31, // pin 29
0xff, // No CTS pin
IOMUXC_LPUART7_RX_SELECT_INPUT,
2, // page 458
2, // page 457
0, // No CTS
1, // Page 863

IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial7(&IMXRT_LPUART7, &UART7_Hardware, tx_buffer7, SERIAL7_TX_BUFFER_SIZE,
rx_buffer7, SERIAL7_RX_BUFFER_SIZE);


void serialEvent7() __attribute__((weak));
void serialEvent7() {Serial7.disableSerialEvents(); } // No use calling this so disable if called...

+ 75
- 0
teensy4/HardwareSerial8.cpp Переглянути файл

@@ -0,0 +1,75 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2019 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/

#include <Arduino.h>
#include "HardwareSerial.h"

#ifndef SERIAL8_TX_BUFFER_SIZE
#define SERIAL8_TX_BUFFER_SIZE 40 // number of outgoing bytes to buffer
#endif
#ifndef SERIAL8_RX_BUFFER_SIZE
#define SERIAL8_RX_BUFFER_SIZE 64 // number of incoming bytes to buffer
#endif
#define IRQ_PRIORITY 64 // 0 = highest priority, 255 = lowest

void IRQHandler_Serial8()
{
Serial8.IRQHandler();
}

void serial_event_check_serial8()
{
if (Serial8.available()) serialEvent8();
}



// Serial8
static BUFTYPE tx_buffer8[SERIAL8_TX_BUFFER_SIZE];
static BUFTYPE rx_buffer8[SERIAL8_RX_BUFFER_SIZE];

static HardwareSerial::hardware_t UART5_Hardware = {
7, IRQ_LPUART5, &IRQHandler_Serial8, &serial_event_check_serial8,
CCM_CCGR3, CCM_CCGR3_LPUART5(CCM_CCGR_ON),
30, //IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24, // pin 30
31, // IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_23, // pin 31
0xff, // No CTS pin
IOMUXC_LPUART5_RX_SELECT_INPUT,
2, // page 450
2, // page 449
0, // No CTS
0,
IRQ_PRIORITY, 38, 24, // IRQ, rts_low_watermark, rts_high_watermark
};
HardwareSerial Serial8(&IMXRT_LPUART5, &UART5_Hardware, tx_buffer8, SERIAL8_TX_BUFFER_SIZE,
rx_buffer8, SERIAL8_RX_BUFFER_SIZE);

void serialEvent8() __attribute__((weak));
void serialEvent8() {Serial8.disableSerialEvents(); } // No use calling this so disable if called...

+ 4
- 10
teensy4/yield.cpp Переглянути файл

@@ -38,16 +38,10 @@ void yield(void)

if (running) return; // TODO: does this need to be atomic?
running = 1;
#if 0
// TODO: all serialEvent to use EventResponder
if (Serial.available()) serialEvent();
if (Serial1.available()) serialEvent1();
if (Serial2.available()) serialEvent2();
if (Serial3.available()) serialEvent3();
if (Serial4.available()) serialEvent4();
if (Serial5.available()) serialEvent5();
if (Serial6.available()) serialEvent6();
#endif

// Current workaround until integrate with EventResponder.
HardwareSerial::processSerialEvents();

running = 0;
EventResponder::runFromYield();
};

Писати Попередній перегляд
Завантаження…
Відмінити
Зберегти