Browse Source
Serial2.setTx and Serial2.setRX should check Uart1
These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2) and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)main
Kurt Eckhardt
8 years ago
1 changed files with 2 additions and 2 deletions
+ 2
- 2
teensy3/serial2.c
View File
| if (opendrain) pin |= 128; | if (opendrain) pin |= 128; | ||||
| if (pin == tx_pin_num) return; | if (pin == tx_pin_num) return; | ||||
| if ((SIM_SCGC4 & SIM_SCGC4_UART2)) { | |||||
| if ((SIM_SCGC4 & SIM_SCGC4_UART1)) { | |||||
| switch (tx_pin_num & 127) { | switch (tx_pin_num & 127) { | ||||
| case 10: CORE_PIN10_CONFIG = 0; break; // PTC4 | case 10: CORE_PIN10_CONFIG = 0; break; // PTC4 | ||||
| #if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.4 or T3.5 | #if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.4 or T3.5 | ||||
| { | { | ||||
| #if defined(KINETISK) | #if defined(KINETISK) | ||||
| if (pin == rx_pin_num) return; | if (pin == rx_pin_num) return; | ||||
| if ((SIM_SCGC4 & SIM_SCGC4_UART2)) { | |||||
| if ((SIM_SCGC4 & SIM_SCGC4_UART1)) { | |||||
| switch (rx_pin_num) { | switch (rx_pin_num) { | ||||
| case 9: CORE_PIN9_CONFIG = 0; break; // PTC3 | case 9: CORE_PIN9_CONFIG = 0; break; // PTC3 | ||||
| #if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.4 or T3.5 | #if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.4 or T3.5 |
Loading…