visus
/
teensy-cores
보기 1
좋아요 0
포크 0
코드 이슈 0 풀 리퀘스트 0 릴리즈 0 위키 Activity
소스 검색

Update Board Names

main
Kurt Eckhardt 8 년 전
부모
db1e687b18
커밋
eef956bb2d
2개의 변경된 파일과 17개의 추가작업 그리고 17개의 파일을 삭제
분할 보기 변경상태 보기
  1. +9
    -9
      teensy3/serial2.c
  2. +8
    -8
      teensy3/serial4.c

+ 9
- 9
teensy3/serial2.c 파일 보기

@@ -117,14 +117,14 @@ void serial2_begin(uint32_t divisor)
switch (rx_pin_num) {
case 9: CORE_PIN9_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
case 26: CORE_PIN26_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 59: CORE_PIN59_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#endif
}
switch (tx_pin_num) {
case 10: CORE_PIN10_CONFIG = PORT_PCR_DSE | PORT_PCR_SRE | PORT_PCR_MUX(3); break;
case 31: CORE_PIN31_CONFIG = PORT_PCR_DSE | PORT_PCR_SRE | PORT_PCR_MUX(3); break;
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 58: CORE_PIN58_CONFIG = PORT_PCR_DSE | PORT_PCR_SRE | PORT_PCR_MUX(3); break;
#endif
}
@@ -198,7 +198,7 @@ void serial2_end(void)
#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.5 or T3.6
case 26: CORE_PIN26_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTE1
#endif
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 59: CORE_PIN59_CONFIG = 0; break;
#endif
}
@@ -207,7 +207,7 @@ void serial2_end(void)
#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.5 or T3.6
case 31: CORE_PIN31_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTE0
#endif
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 58: CORE_PIN58_CONFIG = 0; break;
#endif
}
@@ -244,7 +244,7 @@ void serial2_set_tx(uint8_t pin, uint8_t opendrain)
#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.5 or T3.6
case 31: CORE_PIN31_CONFIG = 0; break; // PTE0
#endif
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 58: CORE_PIN58_CONFIG = 0; break;
#endif
}
@@ -258,7 +258,7 @@ void serial2_set_tx(uint8_t pin, uint8_t opendrain)
#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.5 or T3.6
case 31: CORE_PIN31_CONFIG = cfg | PORT_PCR_MUX(3); break;
#endif
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 58: CORE_PIN58_CONFIG = cfg | PORT_PCR_MUX(3); break;
#endif
}
@@ -277,7 +277,7 @@ void serial2_set_rx(uint8_t pin)
#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.5 or T3.6
case 26: CORE_PIN26_CONFIG = 0; break; // PTE1
#endif
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 59: CORE_PIN59_CONFIG = 0; break;
#endif
}
@@ -286,7 +286,7 @@ void serial2_set_rx(uint8_t pin)
#if !(defined(__MK64FX512__) || defined(__MK66FX1M0__)) // not on T3.5 or T3.6
case 26: CORE_PIN26_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#endif
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 59: CORE_PIN59_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#endif
}
@@ -328,7 +328,7 @@ int serial2_set_cts(uint8_t pin)
if (!(SIM_SCGC4 & SIM_SCGC4_UART1)) return 0;
if (pin == 23) {
CORE_PIN23_CONFIG = PORT_PCR_MUX(3) | PORT_PCR_PE; // weak pulldown
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
} else if (pin == 60) {
CORE_PIN60_CONFIG = PORT_PCR_MUX(3) | PORT_PCR_PE; // weak pulldown
#endif

+ 8
- 8
teensy3/serial4.c 파일 보기

@@ -102,13 +102,13 @@ void serial4_begin(uint32_t divisor)
transmitting = 0;
switch (rx_pin_num) {
case 31: CORE_PIN31_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 63: CORE_PIN63_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#endif
}
switch (tx_pin_num) {
case 32: CORE_PIN32_CONFIG = PORT_PCR_DSE | PORT_PCR_SRE | PORT_PCR_MUX(3); break;
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 62: CORE_PIN62_CONFIG = PORT_PCR_DSE | PORT_PCR_SRE | PORT_PCR_MUX(3); break;
#endif
}
@@ -163,13 +163,13 @@ void serial4_end(void)
CORE_PIN32_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1);
switch (rx_pin_num) {
case 31: CORE_PIN31_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTC3
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 63: CORE_PIN63_CONFIG = 0; break;
#endif
}
switch (tx_pin_num & 127) {
case 32: CORE_PIN32_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_MUX(1); break; // PTC4
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 62: CORE_PIN62_CONFIG = 0; break;
#endif
}
@@ -195,7 +195,7 @@ void serial4_set_tx(uint8_t pin, uint8_t opendrain)
if ((SIM_SCGC4 & SIM_SCGC4_UART3)) {
switch (tx_pin_num & 127) {
case 32: CORE_PIN32_CONFIG = 0; break; // PTB11
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 62: CORE_PIN62_CONFIG = 0; break;
#endif
}
@@ -206,7 +206,7 @@ void serial4_set_tx(uint8_t pin, uint8_t opendrain)
}
switch (pin & 127) {
case 32: CORE_PIN32_CONFIG = cfg | PORT_PCR_MUX(3); break;
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 62: CORE_PIN62_CONFIG = cfg | PORT_PCR_MUX(3);; break;
#endif
}
@@ -221,13 +221,13 @@ void serial4_set_rx(uint8_t pin)
if ((SIM_SCGC4 & SIM_SCGC4_UART3)) {
switch (rx_pin_num) {
case 31: CORE_PIN31_CONFIG = 0; break; // PTC3
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 63: CORE_PIN63_CONFIG = 0; break;
#endif
}
switch (pin) {
case 31: CORE_PIN31_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.4 or T3.5
#if defined USE_SDCARD_PINS && (defined(__MK64FX512__) || defined(__MK66FX1M0__)) // on T3.5 or T3.6
case 63: CORE_PIN63_CONFIG = PORT_PCR_PE | PORT_PCR_PS | PORT_PCR_PFE | PORT_PCR_MUX(3); break;
#endif
}

Write Preview
Loading…
취소
저장