Stripped to 144MHz only for Paul

teensy3/SPIFIFO.h

@@ -4,9 +4,7 @@
 #include "avr_emulation.h"
 
 
-#if F_BUS == 48000000 
-
-// SCK baud rate = (fSYS/PBR) x [(1+DBR)/BR]
+#if F_BUS == 48000000
 
 #define HAS_SPIFIFO
 #define SPI_CLOCK_24MHz   (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(48 / 2) * ((1+1)/2)
@@ -16,26 +14,6 @@
 #define SPI_CLOCK_6MHz    (SPI_CTAR_PBR(0) | SPI_CTAR_BR(1)) //(48 / 2) * ((1+0)/4)
 #define SPI_CLOCK_4MHz    (SPI_CTAR_PBR(1) | SPI_CTAR_BR(1)) //(48 / 3) * ((1+0)/4)
 
-#elif F_BUS == 42000000
-
-#define HAS_SPIFIFO
-#define SPI_CLOCK_24MHz   (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(42 / 2) * ((1+1)/2)  21 MHz
-#define SPI_CLOCK_16MHz   (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(42 / 3) * ((1+1)/2)  33% duty cycle 14 MHz
-#define SPI_CLOCK_12MHz   (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0)) //(42 / 2) * ((1+0)/2) 10.5 MHz
-#define SPI_CLOCK_8MHz    (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0)) //(42 / 3) * ((1+0)/2)  7.5 MHz
-#define SPI_CLOCK_6MHz    (SPI_CTAR_PBR(3) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(42 / 7) * ((1+1)/2)  33% duty cycle
-#define SPI_CLOCK_4MHz    (SPI_CTAR_PBR(1) | SPI_CTAR_BR(1)) //(42 / 3) * ((1+0)/4)  3.5 MHz
-
-#elif  F_BUS == 40000000
-
-#define HAS_SPIFIFO
-#define SPI_CLOCK_24MHz   (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(40 / 2) * ((1+1)/2)  20 MHz
-#define SPI_CLOCK_16MHz   (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(40 / 3) * ((1+1)/2)  33% duty cycle 13.3 MHz 
-#define SPI_CLOCK_12MHz   (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0)) //(40 / 2) * ((1+0)/2) 10 MHz
-#define SPI_CLOCK_8MHz    (SPI_CTAR_PBR(2) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(40 / 5) * ((1+1)/2) 40% duty cycle
-#define SPI_CLOCK_6MHz    (SPI_CTAR_PBR(3) | SPI_CTAR_BR(0) | SPI_CTAR_DBR) //(40 / 7) * ((1+0)/2) 57% duty cycle 5.7 MHz
-#define SPI_CLOCK_4MHz    (SPI_CTAR_PBR(2) | SPI_CTAR_BR(0)) //(40 / 5) * ((1+0)/2)
-
 #elif F_BUS == 24000000
 
 #define HAS_SPIFIFO
@@ -46,9 +24,6 @@
 #define SPI_CLOCK_6MHz    (SPI_CTAR_PBR(0) | SPI_CTAR_BR(0)) //(24 / 2) * ((1+0)/2)
 #define SPI_CLOCK_4MHz    (SPI_CTAR_PBR(1) | SPI_CTAR_BR(0)) //(24 / 3) * ((1+0)/2)
 
-#else 
- #error
-
 #endif
 
 // sck = F_BUS / PBR * ((1+DBR)/BR)

teensy3/analog.c

@@ -41,7 +41,7 @@ static uint8_t analog_reference_internal = 0;
 // datasheet says ADC clock should be 2 to 12 MHz for 16 bit mode
 // datasheet says ADC clock should be 1 to 18 MHz for 8-12 bit mode
 
-#if F_BUS == 48000000 | F_BUS == 42000000 | F_BUS == 40000000 
+#if F_BUS == 48000000
   #define ADC_CFG1_6MHZ   ADC_CFG1_ADIV(2) + ADC_CFG1_ADICLK(1)
   #define ADC_CFG1_12MHZ  ADC_CFG1_ADIV(1) + ADC_CFG1_ADICLK(1)
   #define ADC_CFG1_24MHZ  ADC_CFG1_ADIV(0) + ADC_CFG1_ADICLK(1)