teensy-cores

Tekijä	SHA1	Viesti	Päivämäärä
thewknd	05d0e72ebe	fix serial6_set_tx	7 vuotta sitten
thewknd	f43caad2f7	check SIM_SCGC1_UART5 in serial6_set_tx	7 vuotta sitten
Frank Bösing	cecfe51276	Set RTS Watermarks dependend of rx-buffersize	8 vuotta sitten
Frank Bösing	6dd6073c2c	serialX buffersizes Additional PR for SERIALX_DISABLE follows	8 vuotta sitten
Kurt Eckhardt	426a53c281	Fix Serial6 for Teensy 3.5 Needed to add new Define for clock gate Plus defines to use the new clock gate, plus correct case name for the serial6 isr to match what is in system isr table	8 vuotta sitten
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	8 vuotta sitten
Kurt Eckhardt	7352ea7791	Add Serial6 - T3.4 Uart5, T3.5 LPUart0 This is a WIP, But I have now been able to create Serial6 on T3.4 beta, and so far have tested Send/Receive basic stuff at 115200 and have tried at several CPU speeds in MHZ (192, 216, 180, 120, 96)	8 vuotta sitten
PaulStoffregen	5eab8dd0b8	Fix pin numbers for transmit opendrain on Serial4 & Serial5	8 vuotta sitten
Kurt Eckhardt	7458590a29	Allow SetTX on Serial3/4/5 ... On Serial 3 this addition is for all 3.x. Before it was ifdefed to only do work on Teensy_LC as there is only one valid TX pin. But we now pass in open drain as an option so this code should allow you to not turn it on/off on Serial3 on all of these boards and on Serial4 and Serial5 on the new boards.	8 vuotta sitten
PaulStoffregen	8b3d33689e	Add Serial4 & Serial5 for K64 & K66	8 vuotta sitten
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	8 vuotta sitten
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	8 vuotta sitten
PaulStoffregen	0254d93d95	Teensy-LC doesn't support CTS, so disable its code	8 vuotta sitten
PaulStoffregen	6e0dd8ab39	Use software-based RTS on Serial2 and Serial3	8 vuotta sitten
PaulStoffregen	c6e6060c48	whitespace reformat in serial code	9 vuotta sitten
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	9 vuotta sitten
PaulStoffregen	6ed0c5f01f	Fix Hardware Serial transmitterEnable() on Teensy-LC	9 vuotta sitten
PaulStoffregen	5c9ccd8412	Fix 9 bit transmit mode on Serial3	9 vuotta sitten
PaulStoffregen	e2bf6d44e0	Avoid kinetis.h name conflicts with simple Arduino names	9 vuotta sitten
PaulStoffregen	182037caea	Fix 9 bit hardware serial receive https://forum.pjrc.com/threads/27093-Fix-for-9-bit-serial-receive-bug	9 vuotta sitten
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	9 vuotta sitten
PaulStoffregen	19ee965759	Add transmitterEnable on Serial2 & Serial3	10 vuotta sitten
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	10 vuotta sitten
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	10 vuotta sitten
PaulStoffregen	603afcc984	Fix off-by-1 error in new Serial#.room()	10 vuotta sitten
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	10 vuotta sitten
PaulStoffregen	f2cecda077	Use IRQ_PRIORITY (not hard-coded number) in Serial3	10 vuotta sitten
PaulStoffregen	7ba1cbccc6	Add NVIC priority handling in Serial2 & Serial3	11 vuotta sitten
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	11 vuotta sitten
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	11 vuotta sitten

7 Commitit (3fd4dd7773d542807469977e57911d15eb2a3c93)