teensy-cores

Grafico dei commit

Autore	SHA1	Messaggio	Data
PaulStoffregen	e8748e9b3c	Fix 9 bit mode on Serial1 & Serial2 on Teensy LC	7 anni fa
PaulStoffregen	be40459682	Don't allow pre-init of Serial2 Teensy 3.2 pins on Teensy3.6	8 anni fa
Frank Bösing	cecfe51276	Set RTS Watermarks dependend of rx-buffersize	8 anni fa
Frank Bösing	6dd6073c2c	serialX buffersizes Additional PR for SERIALX_DISABLE follows	8 anni fa
PaulStoffregen	f496103194	Always define the SD card pins - do it like we mean it!	8 anni fa
Kurt Eckhardt	eef956bb2d	Update Board Names	8 anni fa
Kurt Eckhardt	db1e687b18	T3.5/T3.6 Beta: Optional Allow SDCard pins With the new beta boards, for those users who don't need an SDCard for their project, it would be great to allow them to use the 6 IO pins associated with the SDCARD for other purposes. This would probably require a cheap adapter, but these are nice signals to be able to be used. They include: SPI1: SCK, MISO, MOSI, CS0-2 Serail2: TX/RX Serial4: TX/RX I2C1: SCL/SDA This change adds support for GPIO, SPI, Serial2 and Serial4	8 anni fa
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	8 anni fa
Kurt Eckhardt	a8c467f5e6	Fix Compile error for Teensy LC	8 anni fa
Kurt Eckhardt	1067caf0ba	Beta Board names Change	8 anni fa
Kurt Eckhardt	da4b27c0db	T3.2 Serial2.end - handle alternate pins On T3.2 if you do something like: Serial2.setTX(31); Serial2.setRX(26); Serial2.begin(.9600); ... Serial2.end(); It will on the end call will always reconfigure pins 9 and 10 to be digital pins MUX = 1	8 anni fa
Kurt Eckhardt	1bb20b3b61	Serial2.setTx and Serial2.setRX should check Uart1 These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2) and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)	8 anni fa
Kurt Eckhardt	c9bec4c380	Serial2 - !TX(31) !RX(26) on T3.5 Updated Serial2. It had valid TX for T3.2 of 10 and 31, but 31 on T3.5 is RX4 Likewise RX for T3.2 of 9 and 26, but on T3.5 26 is RX1	8 anni fa
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	8 anni fa
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	8 anni fa
PaulStoffregen	0254d93d95	Teensy-LC doesn't support CTS, so disable its code	9 anni fa
PaulStoffregen	6e0dd8ab39	Use software-based RTS on Serial2 and Serial3	9 anni fa
PaulStoffregen	c6e6060c48	whitespace reformat in serial code	9 anni fa
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	9 anni fa
PaulStoffregen	6ed0c5f01f	Fix Hardware Serial transmitterEnable() on Teensy-LC	9 anni fa
PaulStoffregen	e2bf6d44e0	Avoid kinetis.h name conflicts with simple Arduino names	9 anni fa
PaulStoffregen	182037caea	Fix 9 bit hardware serial receive https://forum.pjrc.com/threads/27093-Fix-for-9-bit-serial-receive-bug	9 anni fa
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	9 anni fa
PaulStoffregen	19ee965759	Add transmitterEnable on Serial2 & Serial3	10 anni fa
PaulStoffregen	36fc4f599e	Use Serial2's FIFO on Teensy 3.1	10 anni fa
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	10 anni fa
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	10 anni fa
PaulStoffregen	603afcc984	Fix off-by-1 error in new Serial#.room()	10 anni fa
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	10 anni fa
PaulStoffregen	7ba1cbccc6	Add NVIC priority handling in Serial2 & Serial3	11 anni fa
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	11 anni fa
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	11 anni fa

33 Commit (5c064702ba134c5ad044ab323973e15669d55961)