teensy-cores

作成者	SHA1	メッセージ	日付
PaulStoffregen	571493c10e	Allow huge serial buffers on Teensy 3.x	5年前
PaulStoffregen	c425ecbd0a	Fix serial end() when errors are received but final interrupt never runs	6年前
PaulStoffregen	d51854082b	Fix serail stall when too-fast baud rates attempted	7年前
PaulStoffregen	07906c1091	Teensy LC doesn't support 9 bits on Serial2 & Serial3	7年前
PaulStoffregen	7099935c0e	Update open source license info	7年前
thewknd	91bef221c2	Check for used pins in serial_end and serial3_end	7年前
Frank Bösing	cecfe51276	Set RTS Watermarks dependend of rx-buffersize	8年前
Frank Bösing	6dd6073c2c	serialX buffersizes Additional PR for SERIALX_DISABLE follows	8年前
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	8年前
Kurt Eckhardt	7458590a29	Allow SetTX on Serial3/4/5 ... On Serial 3 this addition is for all 3.x. Before it was ifdefed to only do work on Teensy_LC as there is only one valid TX pin. But we now pass in open drain as an option so this code should allow you to not turn it on/off on Serial3 on all of these boards and on Serial4 and Serial5 on the new boards.	8年前
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	8年前
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	8年前
PaulStoffregen	0254d93d95	Teensy-LC doesn't support CTS, so disable its code	9年前
PaulStoffregen	6e0dd8ab39	Use software-based RTS on Serial2 and Serial3	9年前
PaulStoffregen	c6e6060c48	whitespace reformat in serial code	9年前
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	9年前
PaulStoffregen	6ed0c5f01f	Fix Hardware Serial transmitterEnable() on Teensy-LC	9年前
PaulStoffregen	5c9ccd8412	Fix 9 bit transmit mode on Serial3	9年前
PaulStoffregen	e2bf6d44e0	Avoid kinetis.h name conflicts with simple Arduino names	9年前
PaulStoffregen	182037caea	Fix 9 bit hardware serial receive https://forum.pjrc.com/threads/27093-Fix-for-9-bit-serial-receive-bug	9年前
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	9年前
PaulStoffregen	19ee965759	Add transmitterEnable on Serial2 & Serial3	10年前
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	10年前
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	10年前
PaulStoffregen	603afcc984	Fix off-by-1 error in new Serial#.room()	10年前
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	10年前
PaulStoffregen	f2cecda077	Use IRQ_PRIORITY (not hard-coded number) in Serial3	10年前
PaulStoffregen	7ba1cbccc6	Add NVIC priority handling in Serial2 & Serial3	11年前
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	11年前
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	11年前

30 コミット (8d7efafde53ad096538f0d6f0f607d699f99d436)