teensy-cores

Commit Graph

작성자	SHA1	메시지	날짜
PaulStoffregen	77e813b2a6	analogWriteResolution() returns prior setting	7 년 전
PaulStoffregen	83b837a520	Don't try slow clock for PWM on Teensy LC (not supported by hardware)	7 년 전
PaulStoffregen	da92eda747	Start USB sooner during delay before running user code	7 년 전
PaulStoffregen	c117b46778	Never inline _init_Teensyduino_internal_	8 년 전
PaulStoffregen	e76a593adc	Allow attachInterrupt without pinMode (for AVR compatibility)	8 년 전
PaulStoffregen	56f36603ad	Add pinMode INPUT_DISABLE	8 년 전
Tilo Nitzsche	66e384c22a	"Fast pin interrupt dispatching based on CLZ."	8 년 전
Tilo Nitzsche	c5083ed7cd	Fix issue #181 . Improved pin interrupt dispatch performance.	8 년 전
PaulStoffregen	f496103194	Always define the SD card pins - do it like we mean it!	8 년 전
PaulStoffregen	b03b27ece5	Support PWM on pins 16 & 17 on Teensy 3.6	8 년 전
Kurt Eckhardt	db1e687b18	T3.5/T3.6 Beta: Optional Allow SDCard pins With the new beta boards, for those users who don't need an SDCard for their project, it would be great to allow them to use the 6 IO pins associated with the SDCARD for other purposes. This would probably require a cheap adapter, but these are nice signals to be able to be used. They include: SPI1: SCK, MISO, MOSI, CS0-2 Serail2: TX/RX Serial4: TX/RX I2C1: SCL/SDA This change adds support for GPIO, SPI, Serial2 and Serial4	8 년 전
PaulStoffregen	88dce04d81	Add extra K66 pin defines	8 년 전
PaulStoffregen	bb95e546fe	Increase startup delay slightly	8 년 전
Kurt Eckhardt	eb97df1ffe	PulseIn on LC issue PulseIn may fail on LC as it is using *reg to test the value for on or off, but on LC register is a bitmask associated with several IO pins. So split off for LC to use the MASK value for the pin to test high and low. Warning did not update timings for this, which may be necessary as adds an & in the loop. However when I tried TLC for 5000us timeout, it timed out with 5138us, if I decremented the PULSEIN_LOOPS_PER_USEC by one, then it timed out at 4398... This was at 49mhz.	8 년 전
Frank	c0921e7b0d	add additonal F_TIMER (FTM_MOD) ...were missing :)	8 년 전
PaulStoffregen	6040145aac	More K66 overclocking options	8 년 전
Xenoamor	1d197b5b7f	Update pins_teensy.c Add INPUT_PULLDOWN and OUTPUT_OPENDRAIN options for pinMode()	8 년 전
PaulStoffregen	c364608480	Even more defs	8 년 전
PaulStoffregen	e0dd146824	More defs	8 년 전
PaulStoffregen	59a7b221fa	Fix delay when yield longer than 1ms	9 년 전
PaulStoffregen	c006772eeb	Add startup delay - improves Windows & I2C sensor experience	9 년 전
Thierry Frenkel	0e397cc970	Allow low frequencies for analogWriteFrequency In case the desired frequency is too low to be obtained with F_TIMER because prescale and mod were at their limits, switch automatically to the alternative clock source (31250Hz) before determining prescale and mod with the same algorithm as before.	9 년 전
PaulStoffregen	aa212b61e0	Defs for MK66FX1M0	9 년 전
PaulStoffregen	1e49af2dd2	Add register definitions	9 년 전
PaulStoffregen	ca6b6fd9b0	opps, fix delayMicroseconds on Teensy-LC at 24 MHz for realz	9 년 전
PaulStoffregen	00d45085e6	fix delayMicroseconds on Teensy-LC at 24 MHz https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1?p=75775&viewfull=1#post75775	9 년 전
PaulStoffregen	61b29fa289	Optimize delayMicroseconds() on Teensy-LC https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1	9 년 전
PaulStoffregen	28a3eb04f0	analogWriteFrequency uses float for frequency	9 년 전
duff2013	06f4defa2d	(MKL26Z64) update for F_PLL <= 16MHz	9 년 전
PaulStoffregen	7a68c0f911	Add dummy RTC functions for Teensy-LC	9 년 전
PaulStoffregen	af89f7072e	Add support for Teensy-LC DAC	9 년 전
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	9 년 전
PaulStoffregen	c2ef8b638e	Fix analogWriteFrequency on pinx 25 & 32	10 년 전
PaulStoffregen	3b5dc896f7	Add attachInterruptVector()	10 년 전
PaulStoffregen	663e4fddec	Add support for 2, 4, 8, 16MHz (Duff)	10 년 전
PaulStoffregen	7bee55654c	Support more CPU and bus frequencies	10 년 전
Frank Bösing	6942a12ff4	Stripped to overclock add. 144MHz only for Paul	10 년 전
Frank Bösing	a0907930d6	Fix SPI Attention, slower SPI	10 년 전
Frank Bösing	bbd726f690	Update to 168MHz, 42 MHZ Bus, 28MHz Flash	10 년 전
Frank Bösing	856a79b321	Modified for additional 120MHz Core-Clock	10 년 전
PaulStoffregen	25cc2c3de9	Restore brief delay before USB init	10 년 전
PaulStoffregen	729c211500	Support for Teensy 3.1	11 년 전
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	11 년 전

44 커밋 (c36325198d7e4fce00a5bd8781c24ff19298aed0)