teensy-cores

作成者	SHA1	メッセージ	日付
PaulStoffregen	7099935c0e	Update open source license info	7年前
PaulStoffregen	e8748e9b3c	Fix 9 bit mode on Serial1 & Serial2 on Teensy LC	7年前
PaulStoffregen	be40459682	Don't allow pre-init of Serial2 Teensy 3.2 pins on Teensy3.6	8年前
Frank Bösing	cecfe51276	Set RTS Watermarks dependend of rx-buffersize	8年前
Frank Bösing	6dd6073c2c	serialX buffersizes Additional PR for SERIALX_DISABLE follows	8年前
PaulStoffregen	f496103194	Always define the SD card pins - do it like we mean it!	8年前
Kurt Eckhardt	eef956bb2d	Update Board Names	8年前
Kurt Eckhardt	db1e687b18	T3.5/T3.6 Beta: Optional Allow SDCard pins With the new beta boards, for those users who don't need an SDCard for their project, it would be great to allow them to use the 6 IO pins associated with the SDCARD for other purposes. This would probably require a cheap adapter, but these are nice signals to be able to be used. They include: SPI1: SCK, MISO, MOSI, CS0-2 Serail2: TX/RX Serial4: TX/RX I2C1: SCL/SDA This change adds support for GPIO, SPI, Serial2 and Serial4	8年前
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	8年前
Kurt Eckhardt	a8c467f5e6	Fix Compile error for Teensy LC	8年前
Kurt Eckhardt	1067caf0ba	Beta Board names Change	8年前
Kurt Eckhardt	da4b27c0db	T3.2 Serial2.end - handle alternate pins On T3.2 if you do something like: Serial2.setTX(31); Serial2.setRX(26); Serial2.begin(.9600); ... Serial2.end(); It will on the end call will always reconfigure pins 9 and 10 to be digital pins MUX = 1	8年前
Kurt Eckhardt	1bb20b3b61	Serial2.setTx and Serial2.setRX should check Uart1 These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2) and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)	8年前
Kurt Eckhardt	c9bec4c380	Serial2 - !TX(31) !RX(26) on T3.5 Updated Serial2. It had valid TX for T3.2 of 10 and 31, but 31 on T3.5 is RX4 Likewise RX for T3.2 of 9 and 26, but on T3.5 26 is RX1	8年前
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	8年前
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	8年前
PaulStoffregen	0254d93d95	Teensy-LC doesn't support CTS, so disable its code	9年前
PaulStoffregen	6e0dd8ab39	Use software-based RTS on Serial2 and Serial3	9年前
PaulStoffregen	c6e6060c48	whitespace reformat in serial code	9年前
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	9年前
PaulStoffregen	6ed0c5f01f	Fix Hardware Serial transmitterEnable() on Teensy-LC	9年前
PaulStoffregen	e2bf6d44e0	Avoid kinetis.h name conflicts with simple Arduino names	9年前
PaulStoffregen	182037caea	Fix 9 bit hardware serial receive https://forum.pjrc.com/threads/27093-Fix-for-9-bit-serial-receive-bug	9年前
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	9年前
PaulStoffregen	19ee965759	Add transmitterEnable on Serial2 & Serial3	10年前
PaulStoffregen	36fc4f599e	Use Serial2's FIFO on Teensy 3.1	10年前
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	10年前
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	10年前
PaulStoffregen	603afcc984	Fix off-by-1 error in new Serial#.room()	10年前
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	10年前
PaulStoffregen	7ba1cbccc6	Add NVIC priority handling in Serial2 & Serial3	11年前
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	11年前
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	11年前

34 コミット (e35811cd41d75bf9afd9520600da07fe0edefbf5)