teensy-cores

Commit graph

Autor	SHA1	Nachricht	Datum
Kurt Eckhardt	d48359fc2c	T3.x/LC-SerialX addMemoryFor... An experiement to see how much work again it would take to add the T4 methods to allow user sketches to increase the size of Serial ports RX and TX buffers, without having to edit the Source code which does it then for all sketches. T3.x SerialN Add extra memory capabilities for Serial1-6 Also Fixed serialEventX yield handling when you call begin multiple times There is an issue that if you are not using the serialEvent type code and you call SerialX.begin multiple times, it will add that item to the process list multiple times, which can overrun the memory and cause crash or the like. Fix was to check the list first and see if we are already in the list.	vor 4 Jahren
Kurt Eckhardt	98f01a0d06	T3.x,T4.x LC Serial half duplex support Migrating the half duplex support I did in the Stagnant and out of date PR to enhance Uarts: https://github.com/PaulStoffregen/cores/pull/419 To try to support Half duplex mode in a similar way like we do for RS485 like support. With T3.x made use of bitband address for the TX Direction setting, so Except for the begin which calls format, no code changed, we simply stored the bitband address of the TXDIR flag into the TXDIR variable that was already used for the set direction flag. For T4.x - it is a little more work as there is no bitband support on M7 processors. For GPIO there is a Set and Clear register which we use, but for the appropriate UART register there is no such setup of registers. So I have to special case we are in that mode and do it... Also since not atomic I cli/sei... Serial Half Duplex - Fix T4Serial1 and T-LC Serial1-3 Updates: T4 T4 Serial 1 did not have proper settings for IOMUXC_LPUART6_TX_SELECT_INPUT Tested T4.1 Serial1-8 Tested T3.5 Serial1-6 T3.6 - Added support for LPUART which is Serial6 which now works. T-LC Make half duplex work on T-LC on Serials1-3 Tested on on T3.5 1-6	vor 4 Jahren
PaulStoffregen	571493c10e	Allow huge serial buffers on Teensy 3.x	vor 5 Jahren
PaulStoffregen	c425ecbd0a	Fix serial end() when errors are received but final interrupt never runs	vor 6 Jahren
PaulStoffregen	d51854082b	Fix serail stall when too-fast baud rates attempted	vor 7 Jahren
PaulStoffregen	7099935c0e	Update open source license info	vor 7 Jahren
thewknd	91bef221c2	Check for used pins in serial_end and serial3_end	vor 7 Jahren
thewknd	a70e6fd5d1	Add pin 24 & 25 to Teensy LC serial_begin()	vor 7 Jahren
PaulStoffregen	e8748e9b3c	Fix 9 bit mode on Serial1 & Serial2 on Teensy LC	vor 7 Jahren
Frank Bösing	cecfe51276	Set RTS Watermarks dependend of rx-buffersize	vor 8 Jahren
Frank Bösing	6dd6073c2c	serialX buffersizes Additional PR for SERIALX_DISABLE follows	vor 8 Jahren
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	vor 8 Jahren
Kurt Eckhardt	57be6914a5	Serial1 - New pins work with begin	vor 8 Jahren
Kurt Eckhardt	491e1e21ca	Add support for pins 26 and 27	vor 8 Jahren
PaulStoffregen	f5c6b36008	Support pins 24 & 25 in Serial1 setTX & setRX on Teensy LC	vor 8 Jahren
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	vor 8 Jahren
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	vor 8 Jahren
PaulStoffregen	0254d93d95	Teensy-LC doesn't support CTS, so disable its code	vor 9 Jahren
PaulStoffregen	2c726eae11	RTS/CTS support for Serial1 on Teensy LC & 3.x (experimental)	vor 9 Jahren
PaulStoffregen	c6e6060c48	whitespace reformat in serial code	vor 9 Jahren
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	vor 9 Jahren
PaulStoffregen	6ed0c5f01f	Fix Hardware Serial transmitterEnable() on Teensy-LC	vor 9 Jahren
PaulStoffregen	e2bf6d44e0	Avoid kinetis.h name conflicts with simple Arduino names	vor 9 Jahren
PaulStoffregen	182037caea	Fix 9 bit hardware serial receive https://forum.pjrc.com/threads/27093-Fix-for-9-bit-serial-receive-bug	vor 9 Jahren
duff2013	06f4defa2d	(MKL26Z64) update for F_PLL <= 16MHz	vor 9 Jahren
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	vor 9 Jahren
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	vor 10 Jahren
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	vor 10 Jahren
PaulStoffregen	603afcc984	Fix off-by-1 error in new Serial#.room()	vor 10 Jahren
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	vor 10 Jahren
PaulStoffregen	bff3488fd1	Add Serial1.transmitterEnable(pin) for RS-485	vor 10 Jahren
PaulStoffregen	7ba1cbccc6	Add NVIC priority handling in Serial2 & Serial3	vor 11 Jahren
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	vor 11 Jahren
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	vor 11 Jahren

35 Commits (efeb0ee82cbd4710cbf22ef27cd0b5ba2bdaddc7)