Paul Stoffregen
268848cdb0
Merge pull request #172 from KurtE/Cnt_PWM_Analog_fix
Fix PWM and Analog Pin counts om T3.5 and T3.6
8 years ago
Kurt Eckhardt
67e4f2166b
T3.5/3.6 - SPI has additional Miso/Mosi/SCK pins
Added in the additional SPI pins
MISO 39
MOSI 28
SCK 27
Tested with my ILI9341_t3n (SPIN) version. Will also
Add to ILI9341_t3.
8 years ago
Kurt Eckhardt
8cbf04ccd5
Fix PWM and Analog Pin counts om T3.5 and T3.6
Recent additions did not update these counts.
Seperated T3.5 from T3.6 as PWM and Analog counts are different
8 years ago
PaulStoffregen
d1d357b67e
Add analog pin keywords
8 years ago
PaulStoffregen
3b96d28851
Fix pin number comments
8 years ago
PaulStoffregen
28d7ba477e
Use analog pin to channel tables (faster)
8 years ago
PaulStoffregen
f496103194
Always define the SD card pins - do it like we mean it!
8 years ago
Paul Stoffregen
d267bc104f
Merge pull request #161 from KurtE/T35_USE_SDCARD_PINS
T35 use sdcard pins
8 years ago
Paul Stoffregen
77a27fecd8
Merge pull request #167 from KurtE/T3.6-Add-A23-A24
Add A23 and A24 for T3.5 and T3.6 board
8 years ago
Paul Stoffregen
b180a2cf5c
Merge pull request #170 from KurtE/FIX-SPI0-DMA-for-T3.5
Fix spi0 dma for t3 5
8 years ago
Kurt Eckhardt
310f359860
Wrong DMAMUX Source for SPI0_TX
8 years ago
PaulStoffregen
b03b27ece5
Support PWM on pins 16 & 17 on Teensy 3.6
8 years ago
Paul Stoffregen
cc1641263d
Merge pull request #169 from KurtE/T3.5-Serial6-Fix
Fix Serial6 for Teensy 3.5
8 years ago
Kurt Eckhardt
426a53c281
Fix Serial6 for Teensy 3.5
Needed to add new Define for clock gate
Plus defines to use the new clock gate, plus correct case name for the
serial6 isr to match what is in system isr table
8 years ago
Kurt Eckhardt
8fdabf68ed
One less compare
8 years ago
Kurt Eckhardt
cf6bf5863a
Add A23 and A24 for T3.5 and T3.6 board
I added pins 49 and 50 as analog pins A23 and A24. I still left in the
special casing for pins 44 and 45 being used for Temp and analog
reference
8 years ago
Kurt Eckhardt
eef956bb2d
Update Board Names
8 years ago
Kurt Eckhardt
db1e687b18
T3.5/T3.6 Beta: Optional Allow SDCard pins
With the new beta boards, for those users who don't need an SDCard for
their project, it would be great to allow them to use the 6 IO pins
associated with the SDCARD for other purposes. This would probably
require a cheap adapter, but these are nice signals to be able to be
used. They include:
SPI1: SCK, MISO, MOSI, CS0-2
Serail2: TX/RX
Serial4: TX/RX
I2C1: SCL/SDA
This change adds support for GPIO, SPI, Serial2 and Serial4
8 years ago
PaulStoffregen
0ed6ba9a96
Fix USB serial number on K64 & K66
8 years ago
PaulStoffregen
ce27c4c50b
Add misc SDHC register bitfield defs
8 years ago
Paul Stoffregen
9d48a9507d
Merge pull request #165 from Defragster/master
When concat is same string to string, use memcpy
8 years ago
Defragster
00438a66ed
When concat is same string to string, use memcpy, allows for re-alloc to move string on growth
https://forum.pjrc.com/threads/35688-Something-wrong-with-Adding-a-String-to-itself!?p=111109#post111109
8 years ago
Paul Stoffregen
823df112c5
Merge pull request #164 from KurtE/T35-T36-TLC-UART-2StopBits
Enable Uart 2 stop bit capabilities
8 years ago
Kurt Eckhardt
899cbecc02
Enable Uart 2 stop bit capabilities
The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have
ability to turn on 2 stop bits. So enabled on these boards.
8 years ago
Paul Stoffregen
6fd523990e
Merge pull request #163 from KurtE/Board-names-changed
Beta Board names Change
8 years ago
Kurt Eckhardt
a8c467f5e6
Fix Compile error for Teensy LC
8 years ago
Kurt Eckhardt
1067caf0ba
Beta Board names Change
8 years ago
Paul Stoffregen
1b6770959b
Merge pull request #162 from KurtE/Ser2/Ser4-fixes
Ser2 ser4 fixes
8 years ago
Kurt Eckhardt
78189d6f15
Serial4.setTX - used wrong SIm_SCGC4 test
Was using UART2, should be UART3
8 years ago
Kurt Eckhardt
da4b27c0db
T3.2 Serial2.end - handle alternate pins
On T3.2 if you do something like:
Serial2.setTX(31);
Serial2.setRX(26);
Serial2.begin(.9600);
...
Serial2.end();
It will on the end call will always reconfigure pins 9 and 10 to be
digital pins MUX = 1
8 years ago
PaulStoffregen
4d925d3a1c
Improve async sample rate feedback, add optional mac limit
8 years ago
Paul Stoffregen
bc6e2a87f3
Merge pull request #160 from KurtE/SerialEvent6
Add serialEvent6 to yield
8 years ago
Kurt Eckhardt
44027e2115
Add serialEvent6 to yield
8 years ago
PaulStoffregen
12421ba5a9
Add new Arduino pin defines
8 years ago
PaulStoffregen
731d9123f6
Keycode for Non-US backslash (thanks parsnip42)
fixes #159
8 years ago
PaulStoffregen
d46a56a811
Fix USB audio feedback endpoint attributes
8 years ago
Paul Stoffregen
7735f1dd8b
Merge pull request #158 from KurtE/T3.5-Beta-Serial6
T3 5 beta serial6
8 years ago
Kurt Eckhardt
89d92016c1
Pass at serial6_format
8 years ago
Paul Stoffregen
f315eb80f5
Merge pull request #155 from sumotoy/master
missed pin 26 in SPIFIFO
8 years ago
Kurt Eckhardt
d2f9acc78c
Try using BITBAND to turn on/off TIE and TCIE
Make update of these flags be hopefully interrupt safe
8 years ago
Kurt Eckhardt
7352ea7791
Add Serial6 - T3.4 Uart5, T3.5 LPUart0
This is a WIP, But I have now been able to create Serial6 on T3.4 beta,
and so far have tested Send/Receive basic stuff at 115200 and have tried
at several CPU speeds in MHZ (192, 216, 180, 120, 96)
8 years ago
Paul Stoffregen
d69a3aa053
Merge pull request #157 from KurtE/SPI2-Support
T T3.4 T3.5 SPI2 support
8 years ago
Kurt Eckhardt
c79a667e31
T T3.4 T3.5 SPI2 support
8 years ago
PaulStoffregen
50c805926f
Improve flash security documentation
8 years ago
sumotoy
892d07181d
missed pin 26
8 years ago
Paul Stoffregen
2a7c289045
Merge pull request #154 from duff2013/master
trigger mode enable cmp register def
8 years ago
duff2013
c5c14007bb
trigger mode enable cmp register def
8 years ago
PaulStoffregen
88dce04d81
Add extra K66 pin defines
8 years ago
Paul Stoffregen
42b873097e
Merge pull request #153 from KurtE/Serial2-SetTx/Rx-error
Serial2.setTx and Serial2.setRX should check Uart1
8 years ago
Kurt Eckhardt
1bb20b3b61
Serial2.setTx and Serial2.setRX should check Uart1
These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2)
and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)
8 years ago