teensy-cores

Tekijä	SHA1	Viesti	Päivämäärä
PaulStoffregen	571493c10e	Allow huge serial buffers on Teensy 3.x	5 vuotta sitten
PaulStoffregen	c425ecbd0a	Fix serial end() when errors are received but final interrupt never runs	6 vuotta sitten
PaulStoffregen	d51854082b	Fix serail stall when too-fast baud rates attempted	7 vuotta sitten
PaulStoffregen	07906c1091	Teensy LC doesn't support 9 bits on Serial2 & Serial3	7 vuotta sitten
PaulStoffregen	7099935c0e	Update open source license info	7 vuotta sitten
thewknd	91bef221c2	Check for used pins in serial_end and serial3_end	7 vuotta sitten
Frank Bösing	cecfe51276	Set RTS Watermarks dependend of rx-buffersize	8 vuotta sitten
Frank Bösing	6dd6073c2c	serialX buffersizes Additional PR for SERIALX_DISABLE follows	8 vuotta sitten
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	8 vuotta sitten
Kurt Eckhardt	7458590a29	Allow SetTX on Serial3/4/5 ... On Serial 3 this addition is for all 3.x. Before it was ifdefed to only do work on Teensy_LC as there is only one valid TX pin. But we now pass in open drain as an option so this code should allow you to not turn it on/off on Serial3 on all of these boards and on Serial4 and Serial5 on the new boards.	8 vuotta sitten
PaulStoffregen	1e5260347f	Add opendrain option to Serial#.setTX	8 vuotta sitten
PaulStoffregen	e3989b19f3	Add HardwareSerial setRX(pin) & setTX(pin)	8 vuotta sitten
PaulStoffregen	0254d93d95	Teensy-LC doesn't support CTS, so disable its code	9 vuotta sitten
PaulStoffregen	6e0dd8ab39	Use software-based RTS on Serial2 and Serial3	9 vuotta sitten
PaulStoffregen	c6e6060c48	whitespace reformat in serial code	9 vuotta sitten
PaulStoffregen	c2f550d378	Add serial flow control C functions https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425	9 vuotta sitten
PaulStoffregen	6ed0c5f01f	Fix Hardware Serial transmitterEnable() on Teensy-LC	9 vuotta sitten
PaulStoffregen	5c9ccd8412	Fix 9 bit transmit mode on Serial3	9 vuotta sitten
PaulStoffregen	e2bf6d44e0	Avoid kinetis.h name conflicts with simple Arduino names	9 vuotta sitten
PaulStoffregen	182037caea	Fix 9 bit hardware serial receive https://forum.pjrc.com/threads/27093-Fix-for-9-bit-serial-receive-bug	9 vuotta sitten
PaulStoffregen	9b8d74c089	Initial support for Teensy-LC	9 vuotta sitten
PaulStoffregen	19ee965759	Add transmitterEnable on Serial2 & Serial3	10 vuotta sitten
PaulStoffregen	9c1e41e70e	Change room() to writeBufferFree() https://groups.google.com/a/arduino.cc/d/msg/developers/ls3hkviFYM4/XWT2LbfzNcgJ	10 vuotta sitten
PaulStoffregen	479bde6866	Use enum for IRQ numbers, rename mk20dx128.h to kinetis.h	10 vuotta sitten
PaulStoffregen	603afcc984	Fix off-by-1 error in new Serial#.room()	10 vuotta sitten
PaulStoffregen	d289954223	Add Serial1-3.room() http://forum.pjrc.com/threads/26064-Large-transfers-over-serial-on-Teensy-3-1 http://forum.arduino.cc/index.php/topic,165574.0.html	10 vuotta sitten
PaulStoffregen	f2cecda077	Use IRQ_PRIORITY (not hard-coded number) in Serial3	10 vuotta sitten
PaulStoffregen	7ba1cbccc6	Add NVIC priority handling in Serial2 & Serial3	11 vuotta sitten
PaulStoffregen	29168b784d	Add serial formats and 9 bit modes (disabled by default) to HardwareSerial	11 vuotta sitten
PaulStoffregen	5cecdee933	Initial commit, version 1.17-rc1	11 vuotta sitten

30 Commitit (f6cb39e135ddece2683edbbdb830a722fb123900)