/* Teensyduino Core Library * http://www.pjrc.com/teensy/ * Copyright (c) 2013 PJRC.COM, LLC. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * 1. The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * 2. If the Software is incorporated into a build system that allows * selection among a list of target devices, then similar target * devices manufactured by PJRC.COM must be included in the list of * target devices and selectable in the same manner. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _kinetis_h_ #define _kinetis_h_ #include // Teensy 3.0 #if defined(__MK20DX128__) enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_DMA_ERROR = 4, IRQ_FTFL_COMPLETE = 6, IRQ_FTFL_COLLISION = 7, IRQ_LOW_VOLTAGE = 8, IRQ_LLWU = 9, IRQ_WDOG = 10, IRQ_I2C0 = 11, IRQ_SPI0 = 12, IRQ_I2S0_TX = 13, IRQ_I2S0_RX = 14, IRQ_UART0_LON = 15, IRQ_UART0_STATUS = 16, IRQ_UART0_ERROR = 17, IRQ_UART1_STATUS = 18, IRQ_UART1_ERROR = 19, IRQ_UART2_STATUS = 20, IRQ_UART2_ERROR = 21, IRQ_ADC0 = 22, IRQ_CMP0 = 23, IRQ_CMP1 = 24, IRQ_FTM0 = 25, IRQ_FTM1 = 26, IRQ_CMT = 27, IRQ_RTC_ALARM = 28, IRQ_RTC_SECOND = 29, IRQ_PIT_CH0 = 30, IRQ_PIT_CH1 = 31, IRQ_PIT_CH2 = 32, IRQ_PIT_CH3 = 33, IRQ_PDB = 34, IRQ_USBOTG = 35, IRQ_USBDCD = 36, IRQ_TSI = 37, IRQ_MCG = 38, IRQ_LPTMR = 39, IRQ_PORTA = 40, IRQ_PORTB = 41, IRQ_PORTC = 42, IRQ_PORTD = 43, IRQ_PORTE = 44, IRQ_SOFTWARE = 45 }; #define NVIC_NUM_INTERRUPTS 46 #define DMA_NUM_CHANNELS 4 #define KINETISK #define HAS_KINETISK_UART0 #define HAS_KINETISK_UART0_FIFO #define HAS_KINETISK_UART1 #define HAS_KINETISK_UART2 #define HAS_KINETIS_I2C0 // Teensy 3.1 #elif defined(__MK20DX256__) enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_DMA_CH4 = 4, IRQ_DMA_CH5 = 5, IRQ_DMA_CH6 = 6, IRQ_DMA_CH7 = 7, IRQ_DMA_CH8 = 8, IRQ_DMA_CH9 = 9, IRQ_DMA_CH10 = 10, IRQ_DMA_CH11 = 11, IRQ_DMA_CH12 = 12, IRQ_DMA_CH13 = 13, IRQ_DMA_CH14 = 14, IRQ_DMA_CH15 = 15, IRQ_DMA_ERROR = 16, IRQ_FTFL_COMPLETE = 18, IRQ_FTFL_COLLISION = 19, IRQ_LOW_VOLTAGE = 20, IRQ_LLWU = 21, IRQ_WDOG = 22, IRQ_I2C0 = 24, IRQ_I2C1 = 25, IRQ_SPI0 = 26, IRQ_SPI1 = 27, IRQ_CAN_MESSAGE = 29, IRQ_CAN_BUS_OFF = 30, IRQ_CAN_ERROR = 31, IRQ_CAN_TX_WARN = 32, IRQ_CAN_RX_WARN = 33, IRQ_CAN_WAKEUP = 34, IRQ_I2S0_TX = 35, IRQ_I2S0_RX = 36, IRQ_UART0_LON = 44, IRQ_UART0_STATUS = 45, IRQ_UART0_ERROR = 46, IRQ_UART1_STATUS = 47, IRQ_UART1_ERROR = 48, IRQ_UART2_STATUS = 49, IRQ_UART2_ERROR = 50, IRQ_ADC0 = 57, IRQ_ADC1 = 58, IRQ_CMP0 = 59, IRQ_CMP1 = 60, IRQ_CMP2 = 61, IRQ_FTM0 = 62, IRQ_FTM1 = 63, IRQ_FTM2 = 64, IRQ_CMT = 65, IRQ_RTC_ALARM = 66, IRQ_RTC_SECOND = 67, IRQ_PIT_CH0 = 68, IRQ_PIT_CH1 = 69, IRQ_PIT_CH2 = 70, IRQ_PIT_CH3 = 71, IRQ_PDB = 72, IRQ_USBOTG = 73, IRQ_USBDCD = 74, IRQ_DAC0 = 81, IRQ_TSI = 83, IRQ_MCG = 84, IRQ_LPTMR = 85, IRQ_PORTA = 87, IRQ_PORTB = 88, IRQ_PORTC = 89, IRQ_PORTD = 90, IRQ_PORTE = 91, IRQ_SOFTWARE = 94 }; #define NVIC_NUM_INTERRUPTS 95 #define DMA_NUM_CHANNELS 16 #define KINETISK #define HAS_KINETISK_UART0 #define HAS_KINETISK_UART0_FIFO #define HAS_KINETISK_UART1 #define HAS_KINETISK_UART1_FIFO #define HAS_KINETISK_UART2 #define HAS_KINETIS_I2C0 #define HAS_KINETIS_I2C1 #elif defined(__MKL26Z64__) enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_FTFA = 5, IRQ_LOW_VOLTAGE = 6, IRQ_LLWU = 7, IRQ_I2C0 = 8, IRQ_I2C1 = 9, IRQ_SPI0 = 10, IRQ_SPI1 = 11, IRQ_UART0_STATUS = 12, IRQ_UART1_STATUS = 13, IRQ_UART2_STATUS = 14, IRQ_ADC0 = 15, IRQ_CMP0 = 16, IRQ_FTM0 = 17, IRQ_FTM1 = 18, IRQ_FTM2 = 19, IRQ_RTC_ALARM = 20, IRQ_RTC_SECOND = 21, IRQ_PIT = 22, IRQ_I2S0 = 23, IRQ_USBOTG = 24, IRQ_DAC0 = 25, IRQ_TSI = 26, IRQ_MCG = 27, IRQ_LPTMR = 28, IRQ_SOFTWARE = 29, // TODO: verify this works IRQ_PORTA = 30, IRQ_PORTCD = 31 }; #define NVIC_NUM_INTERRUPTS 32 #define DMA_NUM_CHANNELS 4 #define KINETISL #define HAS_KINETISL_UART0 #define HAS_KINETISL_UART1 #define HAS_KINETISL_UART2 #define HAS_KINETIS_I2C0 #define HAS_KINETIS_I2C0_STOPF #define HAS_KINETIS_I2C1 #define HAS_KINETIS_I2C1_STOPF #endif // end of board-specific definitions #if (F_CPU == 168000000) #define F_PLL 168000000 #define F_BUS 56000000 #define F_MEM 33600000 #elif (F_CPU == 144000000) #define F_PLL 144000000 #define F_BUS 48000000 #define F_MEM 28800000 #elif (F_CPU == 120000000) #define F_PLL 120000000 #define F_BUS 60000000 #define F_MEM 24000000 #elif (F_CPU == 96000000) #define F_PLL 96000000 #define F_BUS 48000000 #define F_MEM 24000000 #elif (F_CPU == 72000000) #define F_PLL 72000000 #define F_BUS 36000000 #define F_MEM 24000000 #elif (F_CPU == 48000000) #define F_PLL 96000000 #if defined(KINETISK) #define F_BUS 48000000 #elif defined(KINETISL) #define F_BUS 24000000 #endif #define F_MEM 24000000 #elif (F_CPU == 24000000) #define F_PLL 96000000 #define F_BUS 24000000 #define F_MEM 24000000 #elif (F_CPU == 16000000) #define F_PLL 16000000 #define F_BUS 16000000 #define F_MEM 16000000 #elif (F_CPU == 8000000) #define F_PLL 8000000 #define F_BUS 8000000 #define F_MEM 8000000 #elif (F_CPU == 4000000) #define F_PLL 4000000 #define F_BUS 4000000 #define F_MEM 4000000 #elif (F_CPU == 2000000) #define F_PLL 2000000 #define F_BUS 2000000 #define F_MEM 1000000 #endif #ifndef NULL #define NULL ((void *)0) #endif // chapter 11: Port control and interrupts (PORT) #define PORTA_PCR0 (*(volatile uint32_t *)0x40049000) // Pin Control Register n #define PORT_PCR_ISF ((uint32_t)0x01000000) // Interrupt Status Flag #define PORT_PCR_IRQC(n) ((uint32_t)(((n) & 15) << 16)) // Interrupt Configuration #define PORT_PCR_IRQC_MASK ((uint32_t)0x000F0000) #define PORT_PCR_LK ((uint32_t)0x00008000) // Lock Register #define PORT_PCR_MUX(n) ((uint32_t)(((n) & 7) << 8)) // Pin Mux Control #define PORT_PCR_MUX_MASK ((uint32_t)0x00000700) #define PORT_PCR_DSE ((uint32_t)0x00000040) // Drive Strength Enable #define PORT_PCR_ODE ((uint32_t)0x00000020) // Open Drain Enable #define PORT_PCR_PFE ((uint32_t)0x00000010) // Passive Filter Enable #define PORT_PCR_SRE ((uint32_t)0x00000004) // Slew Rate Enable #define PORT_PCR_PE ((uint32_t)0x00000002) // Pull Enable #define PORT_PCR_PS ((uint32_t)0x00000001) // Pull Select #define PORTA_PCR1 (*(volatile uint32_t *)0x40049004) // Pin Control Register n #define PORTA_PCR2 (*(volatile uint32_t *)0x40049008) // Pin Control Register n #define PORTA_PCR3 (*(volatile uint32_t *)0x4004900C) // Pin Control Register n #define PORTA_PCR4 (*(volatile uint32_t *)0x40049010) // Pin Control Register n #define PORTA_PCR5 (*(volatile uint32_t *)0x40049014) // Pin Control Register n #define PORTA_PCR6 (*(volatile uint32_t *)0x40049018) // Pin Control Register n #define PORTA_PCR7 (*(volatile uint32_t *)0x4004901C) // Pin Control Register n #define PORTA_PCR8 (*(volatile uint32_t *)0x40049020) // Pin Control Register n #define PORTA_PCR9 (*(volatile uint32_t *)0x40049024) // Pin Control Register n #define PORTA_PCR10 (*(volatile uint32_t *)0x40049028) // Pin Control Register n #define PORTA_PCR11 (*(volatile uint32_t *)0x4004902C) // Pin Control Register n #define PORTA_PCR12 (*(volatile uint32_t *)0x40049030) // Pin Control Register n #define PORTA_PCR13 (*(volatile uint32_t *)0x40049034) // Pin Control Register n #define PORTA_PCR14 (*(volatile uint32_t *)0x40049038) // Pin Control Register n #define PORTA_PCR15 (*(volatile uint32_t *)0x4004903C) // Pin Control Register n #define PORTA_PCR16 (*(volatile uint32_t *)0x40049040) // Pin Control Register n #define PORTA_PCR17 (*(volatile uint32_t *)0x40049044) // Pin Control Register n #define PORTA_PCR18 (*(volatile uint32_t *)0x40049048) // Pin Control Register n #define PORTA_PCR19 (*(volatile uint32_t *)0x4004904C) // Pin Control Register n #define PORTA_PCR20 (*(volatile uint32_t *)0x40049050) // Pin Control Register n #define PORTA_PCR21 (*(volatile uint32_t *)0x40049054) // Pin Control Register n #define PORTA_PCR22 (*(volatile uint32_t *)0x40049058) // Pin Control Register n #define PORTA_PCR23 (*(volatile uint32_t *)0x4004905C) // Pin Control Register n #define PORTA_PCR24 (*(volatile uint32_t *)0x40049060) // Pin Control Register n #define PORTA_PCR25 (*(volatile uint32_t *)0x40049064) // Pin Control Register n #define PORTA_PCR26 (*(volatile uint32_t *)0x40049068) // Pin Control Register n #define PORTA_PCR27 (*(volatile uint32_t *)0x4004906C) // Pin Control Register n #define PORTA_PCR28 (*(volatile uint32_t *)0x40049070) // Pin Control Register n #define PORTA_PCR29 (*(volatile uint32_t *)0x40049074) // Pin Control Register n #define PORTA_PCR30 (*(volatile uint32_t *)0x40049078) // Pin Control Register n #define PORTA_PCR31 (*(volatile uint32_t *)0x4004907C) // Pin Control Register n #define PORTA_GPCLR (*(volatile uint32_t *)0x40049080) // Global Pin Control Low Register #define PORTA_GPCHR (*(volatile uint32_t *)0x40049084) // Global Pin Control High Register #define PORTA_ISFR (*(volatile uint32_t *)0x400490A0) // Interrupt Status Flag Register #define PORTB_PCR0 (*(volatile uint32_t *)0x4004A000) // Pin Control Register n #define PORTB_PCR1 (*(volatile uint32_t *)0x4004A004) // Pin Control Register n #define PORTB_PCR2 (*(volatile uint32_t *)0x4004A008) // Pin Control Register n #define PORTB_PCR3 (*(volatile uint32_t *)0x4004A00C) // Pin Control Register n #define PORTB_PCR4 (*(volatile uint32_t *)0x4004A010) // Pin Control Register n #define PORTB_PCR5 (*(volatile uint32_t *)0x4004A014) // Pin Control Register n #define PORTB_PCR6 (*(volatile uint32_t *)0x4004A018) // Pin Control Register n #define PORTB_PCR7 (*(volatile uint32_t *)0x4004A01C) // Pin Control Register n #define PORTB_PCR8 (*(volatile uint32_t *)0x4004A020) // Pin Control Register n #define PORTB_PCR9 (*(volatile uint32_t *)0x4004A024) // Pin Control Register n #define PORTB_PCR10 (*(volatile uint32_t *)0x4004A028) // Pin Control Register n #define PORTB_PCR11 (*(volatile uint32_t *)0x4004A02C) // Pin Control Register n #define PORTB_PCR12 (*(volatile uint32_t *)0x4004A030) // Pin Control Register n #define PORTB_PCR13 (*(volatile uint32_t *)0x4004A034) // Pin Control Register n #define PORTB_PCR14 (*(volatile uint32_t *)0x4004A038) // Pin Control Register n #define PORTB_PCR15 (*(volatile uint32_t *)0x4004A03C) // Pin Control Register n #define PORTB_PCR16 (*(volatile uint32_t *)0x4004A040) // Pin Control Register n #define PORTB_PCR17 (*(volatile uint32_t *)0x4004A044) // Pin Control Register n #define PORTB_PCR18 (*(volatile uint32_t *)0x4004A048) // Pin Control Register n #define PORTB_PCR19 (*(volatile uint32_t *)0x4004A04C) // Pin Control Register n #define PORTB_PCR20 (*(volatile uint32_t *)0x4004A050) // Pin Control Register n #define PORTB_PCR21 (*(volatile uint32_t *)0x4004A054) // Pin Control Register n #define PORTB_PCR22 (*(volatile uint32_t *)0x4004A058) // Pin Control Register n #define PORTB_PCR23 (*(volatile uint32_t *)0x4004A05C) // Pin Control Register n #define PORTB_PCR24 (*(volatile uint32_t *)0x4004A060) // Pin Control Register n #define PORTB_PCR25 (*(volatile uint32_t *)0x4004A064) // Pin Control Register n #define PORTB_PCR26 (*(volatile uint32_t *)0x4004A068) // Pin Control Register n #define PORTB_PCR27 (*(volatile uint32_t *)0x4004A06C) // Pin Control Register n #define PORTB_PCR28 (*(volatile uint32_t *)0x4004A070) // Pin Control Register n #define PORTB_PCR29 (*(volatile uint32_t *)0x4004A074) // Pin Control Register n #define PORTB_PCR30 (*(volatile uint32_t *)0x4004A078) // Pin Control Register n #define PORTB_PCR31 (*(volatile uint32_t *)0x4004A07C) // Pin Control Register n #define PORTB_GPCLR (*(volatile uint32_t *)0x4004A080) // Global Pin Control Low Register #define PORTB_GPCHR (*(volatile uint32_t *)0x4004A084) // Global Pin Control High Register #define PORTB_ISFR (*(volatile uint32_t *)0x4004A0A0) // Interrupt Status Flag Register #define PORTC_PCR0 (*(volatile uint32_t *)0x4004B000) // Pin Control Register n #define PORTC_PCR1 (*(volatile uint32_t *)0x4004B004) // Pin Control Register n #define PORTC_PCR2 (*(volatile uint32_t *)0x4004B008) // Pin Control Register n #define PORTC_PCR3 (*(volatile uint32_t *)0x4004B00C) // Pin Control Register n #define PORTC_PCR4 (*(volatile uint32_t *)0x4004B010) // Pin Control Register n #define PORTC_PCR5 (*(volatile uint32_t *)0x4004B014) // Pin Control Register n #define PORTC_PCR6 (*(volatile uint32_t *)0x4004B018) // Pin Control Register n #define PORTC_PCR7 (*(volatile uint32_t *)0x4004B01C) // Pin Control Register n #define PORTC_PCR8 (*(volatile uint32_t *)0x4004B020) // Pin Control Register n #define PORTC_PCR9 (*(volatile uint32_t *)0x4004B024) // Pin Control Register n #define PORTC_PCR10 (*(volatile uint32_t *)0x4004B028) // Pin Control Register n #define PORTC_PCR11 (*(volatile uint32_t *)0x4004B02C) // Pin Control Register n #define PORTC_PCR12 (*(volatile uint32_t *)0x4004B030) // Pin Control Register n #define PORTC_PCR13 (*(volatile uint32_t *)0x4004B034) // Pin Control Register n #define PORTC_PCR14 (*(volatile uint32_t *)0x4004B038) // Pin Control Register n #define PORTC_PCR15 (*(volatile uint32_t *)0x4004B03C) // Pin Control Register n #define PORTC_PCR16 (*(volatile uint32_t *)0x4004B040) // Pin Control Register n #define PORTC_PCR17 (*(volatile uint32_t *)0x4004B044) // Pin Control Register n #define PORTC_PCR18 (*(volatile uint32_t *)0x4004B048) // Pin Control Register n #define PORTC_PCR19 (*(volatile uint32_t *)0x4004B04C) // Pin Control Register n #define PORTC_PCR20 (*(volatile uint32_t *)0x4004B050) // Pin Control Register n #define PORTC_PCR21 (*(volatile uint32_t *)0x4004B054) // Pin Control Register n #define PORTC_PCR22 (*(volatile uint32_t *)0x4004B058) // Pin Control Register n #define PORTC_PCR23 (*(volatile uint32_t *)0x4004B05C) // Pin Control Register n #define PORTC_PCR24 (*(volatile uint32_t *)0x4004B060) // Pin Control Register n #define PORTC_PCR25 (*(volatile uint32_t *)0x4004B064) // Pin Control Register n #define PORTC_PCR26 (*(volatile uint32_t *)0x4004B068) // Pin Control Register n #define PORTC_PCR27 (*(volatile uint32_t *)0x4004B06C) // Pin Control Register n #define PORTC_PCR28 (*(volatile uint32_t *)0x4004B070) // Pin Control Register n #define PORTC_PCR29 (*(volatile uint32_t *)0x4004B074) // Pin Control Register n #define PORTC_PCR30 (*(volatile uint32_t *)0x4004B078) // Pin Control Register n #define PORTC_PCR31 (*(volatile uint32_t *)0x4004B07C) // Pin Control Register n #define PORTC_GPCLR (*(volatile uint32_t *)0x4004B080) // Global Pin Control Low Register #define PORTC_GPCHR (*(volatile uint32_t *)0x4004B084) // Global Pin Control High Register #define PORTC_ISFR (*(volatile uint32_t *)0x4004B0A0) // Interrupt Status Flag Register #define PORTD_PCR0 (*(volatile uint32_t *)0x4004C000) // Pin Control Register n #define PORTD_PCR1 (*(volatile uint32_t *)0x4004C004) // Pin Control Register n #define PORTD_PCR2 (*(volatile uint32_t *)0x4004C008) // Pin Control Register n #define PORTD_PCR3 (*(volatile uint32_t *)0x4004C00C) // Pin Control Register n #define PORTD_PCR4 (*(volatile uint32_t *)0x4004C010) // Pin Control Register n #define PORTD_PCR5 (*(volatile uint32_t *)0x4004C014) // Pin Control Register n #define PORTD_PCR6 (*(volatile uint32_t *)0x4004C018) // Pin Control Register n #define PORTD_PCR7 (*(volatile uint32_t *)0x4004C01C) // Pin Control Register n #define PORTD_PCR8 (*(volatile uint32_t *)0x4004C020) // Pin Control Register n #define PORTD_PCR9 (*(volatile uint32_t *)0x4004C024) // Pin Control Register n #define PORTD_PCR10 (*(volatile uint32_t *)0x4004C028) // Pin Control Register n #define PORTD_PCR11 (*(volatile uint32_t *)0x4004C02C) // Pin Control Register n #define PORTD_PCR12 (*(volatile uint32_t *)0x4004C030) // Pin Control Register n #define PORTD_PCR13 (*(volatile uint32_t *)0x4004C034) // Pin Control Register n #define PORTD_PCR14 (*(volatile uint32_t *)0x4004C038) // Pin Control Register n #define PORTD_PCR15 (*(volatile uint32_t *)0x4004C03C) // Pin Control Register n #define PORTD_PCR16 (*(volatile uint32_t *)0x4004C040) // Pin Control Register n #define PORTD_PCR17 (*(volatile uint32_t *)0x4004C044) // Pin Control Register n #define PORTD_PCR18 (*(volatile uint32_t *)0x4004C048) // Pin Control Register n #define PORTD_PCR19 (*(volatile uint32_t *)0x4004C04C) // Pin Control Register n #define PORTD_PCR20 (*(volatile uint32_t *)0x4004C050) // Pin Control Register n #define PORTD_PCR21 (*(volatile uint32_t *)0x4004C054) // Pin Control Register n #define PORTD_PCR22 (*(volatile uint32_t *)0x4004C058) // Pin Control Register n #define PORTD_PCR23 (*(volatile uint32_t *)0x4004C05C) // Pin Control Register n #define PORTD_PCR24 (*(volatile uint32_t *)0x4004C060) // Pin Control Register n #define PORTD_PCR25 (*(volatile uint32_t *)0x4004C064) // Pin Control Register n #define PORTD_PCR26 (*(volatile uint32_t *)0x4004C068) // Pin Control Register n #define PORTD_PCR27 (*(volatile uint32_t *)0x4004C06C) // Pin Control Register n #define PORTD_PCR28 (*(volatile uint32_t *)0x4004C070) // Pin Control Register n #define PORTD_PCR29 (*(volatile uint32_t *)0x4004C074) // Pin Control Register n #define PORTD_PCR30 (*(volatile uint32_t *)0x4004C078) // Pin Control Register n #define PORTD_PCR31 (*(volatile uint32_t *)0x4004C07C) // Pin Control Register n #define PORTD_GPCLR (*(volatile uint32_t *)0x4004C080) // Global Pin Control Low Register #define PORTD_GPCHR (*(volatile uint32_t *)0x4004C084) // Global Pin Control High Register #define PORTD_ISFR (*(volatile uint32_t *)0x4004C0A0) // Interrupt Status Flag Register #define PORTE_PCR0 (*(volatile uint32_t *)0x4004D000) // Pin Control Register n #define PORTE_PCR1 (*(volatile uint32_t *)0x4004D004) // Pin Control Register n #define PORTE_PCR2 (*(volatile uint32_t *)0x4004D008) // Pin Control Register n #define PORTE_PCR3 (*(volatile uint32_t *)0x4004D00C) // Pin Control Register n #define PORTE_PCR4 (*(volatile uint32_t *)0x4004D010) // Pin Control Register n #define PORTE_PCR5 (*(volatile uint32_t *)0x4004D014) // Pin Control Register n #define PORTE_PCR6 (*(volatile uint32_t *)0x4004D018) // Pin Control Register n #define PORTE_PCR7 (*(volatile uint32_t *)0x4004D01C) // Pin Control Register n #define PORTE_PCR8 (*(volatile uint32_t *)0x4004D020) // Pin Control Register n #define PORTE_PCR9 (*(volatile uint32_t *)0x4004D024) // Pin Control Register n #define PORTE_PCR10 (*(volatile uint32_t *)0x4004D028) // Pin Control Register n #define PORTE_PCR11 (*(volatile uint32_t *)0x4004D02C) // Pin Control Register n #define PORTE_PCR12 (*(volatile uint32_t *)0x4004D030) // Pin Control Register n #define PORTE_PCR13 (*(volatile uint32_t *)0x4004D034) // Pin Control Register n #define PORTE_PCR14 (*(volatile uint32_t *)0x4004D038) // Pin Control Register n #define PORTE_PCR15 (*(volatile uint32_t *)0x4004D03C) // Pin Control Register n #define PORTE_PCR16 (*(volatile uint32_t *)0x4004D040) // Pin Control Register n #define PORTE_PCR17 (*(volatile uint32_t *)0x4004D044) // Pin Control Register n #define PORTE_PCR18 (*(volatile uint32_t *)0x4004D048) // Pin Control Register n #define PORTE_PCR19 (*(volatile uint32_t *)0x4004D04C) // Pin Control Register n #define PORTE_PCR20 (*(volatile uint32_t *)0x4004D050) // Pin Control Register n #define PORTE_PCR21 (*(volatile uint32_t *)0x4004D054) // Pin Control Register n #define PORTE_PCR22 (*(volatile uint32_t *)0x4004D058) // Pin Control Register n #define PORTE_PCR23 (*(volatile uint32_t *)0x4004D05C) // Pin Control Register n #define PORTE_PCR24 (*(volatile uint32_t *)0x4004D060) // Pin Control Register n #define PORTE_PCR25 (*(volatile uint32_t *)0x4004D064) // Pin Control Register n #define PORTE_PCR26 (*(volatile uint32_t *)0x4004D068) // Pin Control Register n #define PORTE_PCR27 (*(volatile uint32_t *)0x4004D06C) // Pin Control Register n #define PORTE_PCR28 (*(volatile uint32_t *)0x4004D070) // Pin Control Register n #define PORTE_PCR29 (*(volatile uint32_t *)0x4004D074) // Pin Control Register n #define PORTE_PCR30 (*(volatile uint32_t *)0x4004D078) // Pin Control Register n #define PORTE_PCR31 (*(volatile uint32_t *)0x4004D07C) // Pin Control Register n #define PORTE_GPCLR (*(volatile uint32_t *)0x4004D080) // Global Pin Control Low Register #define PORTE_GPCHR (*(volatile uint32_t *)0x4004D084) // Global Pin Control High Register #define PORTE_ISFR (*(volatile uint32_t *)0x4004D0A0) // Interrupt Status Flag Register // Chapter 12: System Integration Module (SIM) #define SIM_SOPT1 (*(volatile uint32_t *)0x40047000) // System Options Register 1 #define SIM_SOPT1CFG (*(volatile uint32_t *)0x40047004) // SOPT1 Configuration Register #define SIM_SOPT2 (*(volatile uint32_t *)0x40048004) // System Options Register 2 #define SIM_SOPT2_UART0SRC(n) (uint32_t)(((n) & 3) << 26) // UART0 Clock Source, 0=off, 1=FLL/PLL, 2=OSCERCLK, 3=MCGIRCLK #define SIM_SOPT2_TPMSRC(n) (uint32_t)(((n) & 3) << 24) // TPM Clock Source, 0=off, 1=FLL/PLL, 2=OSCERCLK, 3=MCGIRCLK #define SIM_SOPT2_USBSRC ((uint32_t)0x00040000) // 0=USB_CLKIN, 1=FFL/PLL #define SIM_SOPT2_PLLFLLSEL ((uint32_t)0x00010000) // 0=FLL, 1=PLL #define SIM_SOPT2_TRACECLKSEL ((uint32_t)0x00001000) // 0=MCGOUTCLK, 1=CPU #define SIM_SOPT2_PTD7PAD ((uint32_t)0x00000800) // 0=normal, 1=double drive PTD7 #define SIM_SOPT2_CLKOUTSEL(n) ((uint32_t)(((n) & 7) << 5)) // Selects the clock to output on the CLKOUT pin. #define SIM_SOPT2_RTCCLKOUTSEL ((uint32_t)0x00000010) // RTC clock out select #define SIM_SOPT4 (*(volatile uint32_t *)0x4004800C) // System Options Register 4 #define SIM_SOPT5 (*(volatile uint32_t *)0x40048010) // System Options Register 5 #define SIM_SOPT7 (*(volatile uint32_t *)0x40048018) // System Options Register 7 #define SIM_SDID (*(const uint32_t *)0x40048024) // System Device Identification Register #define SIM_SCGC2 (*(volatile uint32_t *)0x4004802C) // System Clock Gating Control Register 2 #define SIM_SCGC2_DAC0 ((uint32_t)0x00001000) // DAC0 Clock Gate Control #define SIM_SCGC3 (*(volatile uint32_t *)0x40048030) // System Clock Gating Control Register 3 #define SIM_SCGC3_ADC1 ((uint32_t)0x08000000) // ADC1 Clock Gate Control #define SIM_SCGC3_FTM2 ((uint32_t)0x01000000) // FTM2 Clock Gate Control #define SIM_SCGC4 (*(volatile uint32_t *)0x40048034) // System Clock Gating Control Register 4 #define SIM_SCGC4_VREF ((uint32_t)0x00100000) // VREF Clock Gate Control #define SIM_SCGC4_CMP ((uint32_t)0x00080000) // Comparator Clock Gate Control #define SIM_SCGC4_USBOTG ((uint32_t)0x00040000) // USB Clock Gate Control #define SIM_SCGC4_UART2 ((uint32_t)0x00001000) // UART2 Clock Gate Control #define SIM_SCGC4_UART1 ((uint32_t)0x00000800) // UART1 Clock Gate Control #define SIM_SCGC4_UART0 ((uint32_t)0x00000400) // UART0 Clock Gate Control #define SIM_SCGC4_I2C1 ((uint32_t)0x00000080) // I2C1 Clock Gate Control #define SIM_SCGC4_I2C0 ((uint32_t)0x00000040) // I2C0 Clock Gate Control #define SIM_SCGC4_CMT ((uint32_t)0x00000004) // CMT Clock Gate Control #define SIM_SCGC4_EWM ((uint32_t)0x00000002) // EWM Clock Gate Control #ifdef KINETISL #define SIM_SCGC4_SPI1 ((uint32_t)0x00800000) // #define SIM_SCGC4_SPI0 ((uint32_t)0x00400000) // #endif #define SIM_SCGC5 (*(volatile uint32_t *)0x40048038) // System Clock Gating Control Register 5 #define SIM_SCGC5_PORTE ((uint32_t)0x00002000) // Port E Clock Gate Control #define SIM_SCGC5_PORTD ((uint32_t)0x00001000) // Port D Clock Gate Control #define SIM_SCGC5_PORTC ((uint32_t)0x00000800) // Port C Clock Gate Control #define SIM_SCGC5_PORTB ((uint32_t)0x00000400) // Port B Clock Gate Control #define SIM_SCGC5_PORTA ((uint32_t)0x00000200) // Port A Clock Gate Control #define SIM_SCGC5_TSI ((uint32_t)0x00000020) // Touch Sense Input TSI Clock Gate Control #define SIM_SCGC5_LPTIMER ((uint32_t)0x00000001) // Low Power Timer Access Control #define SIM_SCGC6 (*(volatile uint32_t *)0x4004803C) // System Clock Gating Control Register 6 #define SIM_SCGC6_DAC0 ((uint32_t)0x80000000) // DAC on Kinetis-L #define SIM_SCGC6_RTC ((uint32_t)0x20000000) // RTC Access #define SIM_SCGC6_ADC0 ((uint32_t)0x08000000) // ADC0 Clock Gate Control #define SIM_SCGC6_FTM1 ((uint32_t)0x02000000) // FTM1 Clock Gate Control #define SIM_SCGC6_FTM0 ((uint32_t)0x01000000) // FTM0 Clock Gate Control #define SIM_SCGC6_TPM2 ((uint32_t)0x04000000) // FTM1 Clock Gate Control #define SIM_SCGC6_TPM1 ((uint32_t)0x02000000) // FTM1 Clock Gate Control #define SIM_SCGC6_TPM0 ((uint32_t)0x01000000) // FTM0 Clock Gate Control #define SIM_SCGC6_PIT ((uint32_t)0x00800000) // PIT Clock Gate Control #define SIM_SCGC6_PDB ((uint32_t)0x00400000) // PDB Clock Gate Control #define SIM_SCGC6_USBDCD ((uint32_t)0x00200000) // USB DCD Clock Gate Control #define SIM_SCGC6_CRC ((uint32_t)0x00040000) // CRC Clock Gate Control #define SIM_SCGC6_I2S ((uint32_t)0x00008000) // I2S Clock Gate Control #ifdef KINETISK #define SIM_SCGC6_SPI1 ((uint32_t)0x00002000) // SPI1 Clock Gate Control #define SIM_SCGC6_SPI0 ((uint32_t)0x00001000) // SPI0 Clock Gate Control #endif #define SIM_SCGC6_FLEXCAN0 ((uint32_t)0x00000010) // FlexCAN0 Clock Gate Control #define SIM_SCGC6_DMAMUX ((uint32_t)0x00000002) // DMA Mux Clock Gate Control #define SIM_SCGC6_FTFL ((uint32_t)0x00000001) // Flash Memory Clock Gate Control #define SIM_SCGC7 (*(volatile uint32_t *)0x40048040) // System Clock Gating Control Register 7 #if defined(KINETISK) #define SIM_SCGC7_DMA ((uint32_t)0x00000002) // DMA Clock Gate Control #elif defined(KINETISL) #define SIM_SCGC7_DMA ((uint32_t)0x00000100) // DMA Clock Gate Control #endif #define SIM_CLKDIV1 (*(volatile uint32_t *)0x40048044) // System Clock Divider Register 1 #define SIM_CLKDIV1_OUTDIV1(n) ((uint32_t)(((n) & 0x0F) << 28)) // divide value for the core/system clock #define SIM_CLKDIV1_OUTDIV2(n) ((uint32_t)(((n) & 0x0F) << 24)) // divide value for the peripheral clock #define SIM_CLKDIV1_OUTDIV4(n) ((uint32_t)(((n) & 0x0F) << 16)) // divide value for the flash clock #define SIM_CLKDIV2 (*(volatile uint32_t *)0x40048048) // System Clock Divider Register 2 #define SIM_CLKDIV2_USBDIV(n) ((uint32_t)(((n) & 0x07) << 1)) #define SIM_CLKDIV2_USBFRAC ((uint32_t)0x01) #define SIM_FCFG1 (*(const uint32_t *)0x4004804C) // Flash Configuration Register 1 #define SIM_FCFG2 (*(const uint32_t *)0x40048050) // Flash Configuration Register 2 #define SIM_UIDH (*(const uint32_t *)0x40048054) // Unique Identification Register High #define SIM_UIDMH (*(const uint32_t *)0x40048058) // Unique Identification Register Mid-High #define SIM_UIDML (*(const uint32_t *)0x4004805C) // Unique Identification Register Mid Low #define SIM_UIDL (*(const uint32_t *)0x40048060) // Unique Identification Register Low #define SIM_COPC (*(volatile uint32_t *)0x40048100) // COP Control Register (SIM_COPC) #define SIM_SRVCOP (*(volatile uint32_t *)0x40048104) // Service COP Register (SIM_SRVCOP) // Chapter 13: Reset Control Module (RCM) #define RCM_SRS0 (*(volatile uint8_t *)0x4007F000) // System Reset Status Register 0 #define RCM_SRS0_POR ((uint8_t)0x80) #define RCM_SRS0_PIN ((uint8_t)0x40) #define RCM_SRS0_WDOG ((uint8_t)0x20) #define RCM_SRS0_LOL ((uint8_t)0x08) #define RCM_SRS0_LOC ((uint8_t)0x04) #define RCM_SRS0_LVD ((uint8_t)0x02) #define RCM_SRS0_WAKEUP ((uint8_t)0x01) #define RCM_SRS1 (*(volatile uint8_t *)0x4007F001) // System Reset Status Register 1 #define RCM_SRS1_SACKERR ((uint8_t)0x20) #define RCM_SRS1_EZPT ((uint8_t)0x10) #define RCM_SRS1_MDM_AP ((uint8_t)0x08) #define RCM_SRS1_SW ((uint8_t)0x04) #define RCM_SRS1_LOCKUP ((uint8_t)0x02) #define RCM_SRS1_JTAG ((uint8_t)0x01) #define RCM_RPFC (*(volatile uint8_t *)0x4007F004) // Reset Pin Filter Control Register #define RCM_RPFW (*(volatile uint8_t *)0x4007F005) // Reset Pin Filter Width Register #define RCM_MR (*(volatile uint8_t *)0x4007F007) // Mode Register // Chapter 14: System Mode Controller #define SMC_PMPROT (*(volatile uint8_t *)0x4007E000) // Power Mode Protection Register #define SMC_PMPROT_AVLP ((uint8_t)0x20) // Allow very low power modes #define SMC_PMPROT_ALLS ((uint8_t)0x08) // Allow low leakage stop mode #define SMC_PMPROT_AVLLS ((uint8_t)0x02) // Allow very low leakage stop mode #define SMC_PMCTRL (*(volatile uint8_t *)0x4007E001) // Power Mode Control Register #define SMC_PMCTRL_LPWUI ((uint8_t)0x80) // Low Power Wake Up on Interrupt #define SMC_PMCTRL_RUNM(n) ((uint8_t)(((n) & 0x03) << 5)) // Run Mode Control #define SMC_PMCTRL_STOPA ((uint8_t)0x08) // Stop Aborted #define SMC_PMCTRL_STOPM(n) ((uint8_t)((n) & 0x07)) // Stop Mode Control #define SMC_VLLSCTRL (*(volatile uint8_t *)0x4007E002) // VLLS Control Register #define SMC_VLLSCTRL_PORPO ((uint8_t)0x20) // POR Power Option #define SMC_VLLSCTRL_VLLSM(n) ((uint8_t)((n) & 0x07)) // VLLS Mode Control #define SMC_PMSTAT (*(volatile uint8_t *)0x4007E003) // Power Mode Status Register #define SMC_PMSTAT_RUN ((uint8_t)0x01) // Current power mode is RUN #define SMC_PMSTAT_STOP ((uint8_t)0x02) // Current power mode is STOP #define SMC_PMSTAT_VLPR ((uint8_t)0x04) // Current power mode is VLPR #define SMC_PMSTAT_VLPW ((uint8_t)0x08) // Current power mode is VLPW #define SMC_PMSTAT_VLPS ((uint8_t)0x10) // Current power mode is VLPS #define SMC_PMSTAT_LLS ((uint8_t)0x20) // Current power mode is LLS #define SMC_PMSTAT_VLLS ((uint8_t)0x40) // Current power mode is VLLS // Chapter 15: Power Management Controller #define PMC_LVDSC1 (*(volatile uint8_t *)0x4007D000) // Low Voltage Detect Status And Control 1 register #define PMC_LVDSC1_LVDF ((uint8_t)0x80) // Low-Voltage Detect Flag #define PMC_LVDSC1_LVDACK ((uint8_t)0x40) // Low-Voltage Detect Acknowledge #define PMC_LVDSC1_LVDIE ((uint8_t)0x20) // Low-Voltage Detect Interrupt Enable #define PMC_LVDSC1_LVDRE ((uint8_t)0x10) // Low-Voltage Detect Reset Enable #define PMC_LVDSC1_LVDV(n) ((uint8_t)((n) & 0x03)) // Low-Voltage Detect Voltage Select #define PMC_LVDSC2 (*(volatile uint8_t *)0x4007D001) // Low Voltage Detect Status And Control 2 register #define PMC_LVDSC2_LVWF ((uint8_t)0x80) // Low-Voltage Warning Flag #define PMC_LVDSC2_LVWACK ((uint8_t)0x40) // Low-Voltage Warning Acknowledge #define PMC_LVDSC2_LVWIE ((uint8_t)0x20) // Low-Voltage Warning Interrupt Enable #define PMC_LVDSC2_LVWV(n) ((uint8_t)((n) & 0x03)) // Low-Voltage Warning Voltage Select #define PMC_REGSC (*(volatile uint8_t *)0x4007D002) // Regulator Status And Control register #define PMC_REGSC_BGEN ((uint8_t)0x10) // Bandgap Enable In VLPx Operation #define PMC_REGSC_ACKISO ((uint8_t)0x08) // Acknowledge Isolation #define PMC_REGSC_REGONS ((uint8_t)0x04) // Regulator In Run Regulation Status #define PMC_REGSC_BGBE ((uint8_t)0x01) // Bandgap Buffer Enable // Chapter 16: Low-Leakage Wakeup Unit (LLWU) #define LLWU_PE1 (*(volatile uint8_t *)0x4007C000) // LLWU Pin Enable 1 register #define LLWU_PE2 (*(volatile uint8_t *)0x4007C001) // LLWU Pin Enable 2 register #define LLWU_PE3 (*(volatile uint8_t *)0x4007C002) // LLWU Pin Enable 3 register #define LLWU_PE4 (*(volatile uint8_t *)0x4007C003) // LLWU Pin Enable 4 register #define LLWU_ME (*(volatile uint8_t *)0x4007C004) // LLWU Module Enable register #define LLWU_F1 (*(volatile uint8_t *)0x4007C005) // LLWU Flag 1 register #define LLWU_F2 (*(volatile uint8_t *)0x4007C006) // LLWU Flag 2 register #define LLWU_F3 (*(volatile uint8_t *)0x4007C007) // LLWU Flag 3 register #define LLWU_FILT1 (*(volatile uint8_t *)0x4007C008) // LLWU Pin Filter 1 register #define LLWU_FILT2 (*(volatile uint8_t *)0x4007C009) // LLWU Pin Filter 2 register #define LLWU_RST (*(volatile uint8_t *)0x4007C00A) // LLWU Reset Enable register // Chapter 17: Miscellaneous Control Module (MCM) #if defined(KINETISK) #define MCM_PLASC (*(volatile uint16_t *)0xE0080008) // Crossbar Switch (AXBS) Slave Configuration #define MCM_PLAMC (*(volatile uint16_t *)0xE008000A) // Crossbar Switch (AXBS) Master Configuration #define MCM_PLACR (*(volatile uint32_t *)0xE008000C) // Crossbar Switch (AXBS) Control Register (MK20DX128) #define MCM_PLACR_ARG ((uint32_t)0x00000200) // Arbitration select, 0=fixed, 1=round-robin #define MCM_CR (*(volatile uint32_t *)0xE008000C) // RAM arbitration control register (MK20DX256) #define MCM_CR_SRAMLWP ((uint32_t)0x40000000) // SRAM_L write protect #define MCM_CR_SRAMLAP(n) ((uint32_t)(((n) & 0x03) << 28)) // SRAM_L priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA #define MCM_CR_SRAMUWP ((uint32_t)0x04000000) // SRAM_U write protect #define MCM_CR_SRAMUAP(n) ((uint32_t)(((n) & 0x03) << 24)) // SRAM_U priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA #elif defined(KINETISL) #define MCM_PLASC (*(volatile uint16_t *)0xF0003008) // Crossbar Switch (AXBS) Slave Configuration #define MCM_PLAMC (*(volatile uint16_t *)0xF000300A) // Crossbar Switch (AXBS) Master Configuration #define MCM_PLACR (*(volatile uint32_t *)0xF000300C) // Platform Control Register #define MCM_PLACR_ESFC ((uint32_t)0x00010000) // Enable Stalling Flash Controller #define MCM_PLACR_DFCS ((uint32_t)0x00008000) // Disable Flash Controller Speculation #define MCM_PLACR_EFDS ((uint32_t)0x00004000) // Enable Flash Data Speculation #define MCM_PLACR_DFCC ((uint32_t)0x00002000) // Disable Flash Controller Cache #define MCM_PLACR_DFCIC ((uint32_t)0x00001000) // Disable Flash Controller Instruction Caching #define MCM_PLACR_DFCDA ((uint32_t)0x00000800) // Disable Flash Controller Data Caching #define MCM_PLACR_CFCC ((uint32_t)0x00000400) // Clear Flash Controller Cache #define MCM_PLACR_ARB ((uint32_t)0x00000200) // Arbitration select #define MCM_CPO (*(volatile uint32_t *)0xF0003040) // Compute Operation Control Register #endif // Crossbar Switch (AXBS) - only programmable on MK20DX256 #define AXBS_PRS0 (*(volatile uint32_t *)0x40004000) // Priority Registers Slave 0 #define AXBS_CRS0 (*(volatile uint32_t *)0x40004010) // Control Register 0 #define AXBS_PRS1 (*(volatile uint32_t *)0x40004100) // Priority Registers Slave 1 #define AXBS_CRS1 (*(volatile uint32_t *)0x40004110) // Control Register 1 #define AXBS_PRS2 (*(volatile uint32_t *)0x40004200) // Priority Registers Slave 2 #define AXBS_CRS2 (*(volatile uint32_t *)0x40004210) // Control Register 2 #define AXBS_PRS3 (*(volatile uint32_t *)0x40004300) // Priority Registers Slave 3 #define AXBS_CRS3 (*(volatile uint32_t *)0x40004310) // Control Register 3 #define AXBS_PRS4 (*(volatile uint32_t *)0x40004400) // Priority Registers Slave 4 #define AXBS_CRS4 (*(volatile uint32_t *)0x40004410) // Control Register 4 #define AXBS_PRS5 (*(volatile uint32_t *)0x40004500) // Priority Registers Slave 5 #define AXBS_CRS5 (*(volatile uint32_t *)0x40004510) // Control Register 5 #define AXBS_PRS6 (*(volatile uint32_t *)0x40004600) // Priority Registers Slave 6 #define AXBS_CRS6 (*(volatile uint32_t *)0x40004610) // Control Register 6 #define AXBS_PRS7 (*(volatile uint32_t *)0x40004700) // Priority Registers Slave 7 #define AXBS_CRS7 (*(volatile uint32_t *)0x40004710) // Control Register 7 #define AXBS_MGPCR0 (*(volatile uint32_t *)0x40004800) // Master 0 General Purpose Control Register #define AXBS_MGPCR1 (*(volatile uint32_t *)0x40004900) // Master 1 General Purpose Control Register #define AXBS_MGPCR2 (*(volatile uint32_t *)0x40004A00) // Master 2 General Purpose Control Register #define AXBS_MGPCR3 (*(volatile uint32_t *)0x40004B00) // Master 3 General Purpose Control Register #define AXBS_MGPCR4 (*(volatile uint32_t *)0x40004C00) // Master 4 General Purpose Control Register #define AXBS_MGPCR5 (*(volatile uint32_t *)0x40004D00) // Master 5 General Purpose Control Register #define AXBS_MGPCR6 (*(volatile uint32_t *)0x40004E00) // Master 6 General Purpose Control Register #define AXBS_MGPCR7 (*(volatile uint32_t *)0x40004F00) // Master 7 General Purpose Control Register #define AXBS_CRS_READONLY ((uint32_t)0x80000000) #define AXBS_CRS_HALTLOWPRIORITY ((uint32_t)0x40000000) #define AXBS_CRS_ARB_FIXED ((uint32_t)0x00000000) #define AXBS_CRS_ARB_ROUNDROBIN ((uint32_t)0x00010000) #define AXBS_CRS_PARK_FIXED ((uint32_t)0x00000000) #define AXBS_CRS_PARK_PREVIOUS ((uint32_t)0x00000010) #define AXBS_CRS_PARK_NONE ((uint32_t)0x00000020) #define AXBS_CRS_PARK(n) ((uint32_t)(((n) & 7) << 0)) // Chapter 20: Direct Memory Access Multiplexer (DMAMUX) #define DMAMUX0_CHCFG0 (*(volatile uint8_t *)0x40021000) // Channel Configuration register #define DMAMUX0_CHCFG1 (*(volatile uint8_t *)0x40021001) // Channel Configuration register #define DMAMUX0_CHCFG2 (*(volatile uint8_t *)0x40021002) // Channel Configuration register #define DMAMUX0_CHCFG3 (*(volatile uint8_t *)0x40021003) // Channel Configuration register #define DMAMUX0_CHCFG4 (*(volatile uint8_t *)0x40021004) // Channel Configuration register #define DMAMUX0_CHCFG5 (*(volatile uint8_t *)0x40021005) // Channel Configuration register #define DMAMUX0_CHCFG6 (*(volatile uint8_t *)0x40021006) // Channel Configuration register #define DMAMUX0_CHCFG7 (*(volatile uint8_t *)0x40021007) // Channel Configuration register #define DMAMUX0_CHCFG8 (*(volatile uint8_t *)0x40021008) // Channel Configuration register #define DMAMUX0_CHCFG9 (*(volatile uint8_t *)0x40021009) // Channel Configuration register #define DMAMUX0_CHCFG10 (*(volatile uint8_t *)0x4002100A) // Channel Configuration register #define DMAMUX0_CHCFG11 (*(volatile uint8_t *)0x4002100B) // Channel Configuration register #define DMAMUX0_CHCFG12 (*(volatile uint8_t *)0x4002100C) // Channel Configuration register #define DMAMUX0_CHCFG13 (*(volatile uint8_t *)0x4002100D) // Channel Configuration register #define DMAMUX0_CHCFG14 (*(volatile uint8_t *)0x4002100E) // Channel Configuration register #define DMAMUX0_CHCFG15 (*(volatile uint8_t *)0x4002100F) // Channel Configuration register #define DMAMUX_DISABLE 0 #define DMAMUX_TRIG 64 #define DMAMUX_ENABLE 128 #define DMAMUX_SOURCE_UART0_RX 2 #define DMAMUX_SOURCE_UART0_TX 3 #define DMAMUX_SOURCE_UART1_RX 4 #define DMAMUX_SOURCE_UART1_TX 5 #define DMAMUX_SOURCE_UART2_RX 6 #define DMAMUX_SOURCE_UART2_TX 7 #define DMAMUX_SOURCE_I2S0_RX 14 #define DMAMUX_SOURCE_I2S0_TX 15 #define DMAMUX_SOURCE_SPI0_RX 16 #define DMAMUX_SOURCE_SPI0_TX 17 #define DMAMUX_SOURCE_SPI1_RX 18 #define DMAMUX_SOURCE_SPI1_TX 19 #define DMAMUX_SOURCE_I2C0 22 #define DMAMUX_SOURCE_I2C1 23 #define DMAMUX_SOURCE_FTM0_CH0 24 #define DMAMUX_SOURCE_FTM0_CH1 25 #define DMAMUX_SOURCE_FTM0_CH2 26 #define DMAMUX_SOURCE_FTM0_CH3 27 #define DMAMUX_SOURCE_FTM0_CH4 28 #define DMAMUX_SOURCE_FTM0_CH5 29 #define DMAMUX_SOURCE_FTM0_CH6 30 #define DMAMUX_SOURCE_FTM0_CH7 31 #define DMAMUX_SOURCE_FTM1_CH0 32 #define DMAMUX_SOURCE_FTM1_CH1 33 #define DMAMUX_SOURCE_FTM2_CH0 34 #define DMAMUX_SOURCE_FTM2_CH1 35 #define DMAMUX_SOURCE_ADC0 40 #define DMAMUX_SOURCE_ADC1 41 #define DMAMUX_SOURCE_CMP0 42 #define DMAMUX_SOURCE_CMP1 43 #define DMAMUX_SOURCE_CMP2 44 #define DMAMUX_SOURCE_DAC0 45 #define DMAMUX_SOURCE_CMT 47 #define DMAMUX_SOURCE_PDB 48 #define DMAMUX_SOURCE_PORTA 49 #define DMAMUX_SOURCE_PORTB 50 #define DMAMUX_SOURCE_PORTC 51 #define DMAMUX_SOURCE_PORTD 52 #define DMAMUX_SOURCE_PORTE 53 #if defined(KINETISK) #define DMAMUX_SOURCE_ALWAYS0 54 #define DMAMUX_SOURCE_ALWAYS1 55 #define DMAMUX_SOURCE_ALWAYS2 56 #define DMAMUX_SOURCE_ALWAYS3 57 #define DMAMUX_SOURCE_ALWAYS4 58 #define DMAMUX_SOURCE_ALWAYS5 59 #define DMAMUX_SOURCE_ALWAYS6 60 #define DMAMUX_SOURCE_ALWAYS7 61 #define DMAMUX_SOURCE_ALWAYS8 62 #define DMAMUX_SOURCE_ALWAYS9 63 #define DMAMUX_NUM_SOURCE_ALWAYS 10 #elif defined(KINETISL) #define DMAMUX_SOURCE_FTM0_OV 54 #define DMAMUX_SOURCE_FTM1_OV 55 #define DMAMUX_SOURCE_FTM2_OV 56 #define DMAMUX_SOURCE_TSI 57 #define DMAMUX_SOURCE_ALWAYS0 60 #define DMAMUX_SOURCE_ALWAYS1 61 #define DMAMUX_SOURCE_ALWAYS2 62 #define DMAMUX_SOURCE_ALWAYS3 63 #define DMAMUX_NUM_SOURCE_ALWAYS 4 #endif // Chapter 21: Direct Memory Access Controller (eDMA) #if defined(KINETISK) #define DMA_CR (*(volatile uint32_t *)0x40008000) // Control Register #define DMA_CR_CX ((uint32_t)(1<<17)) // Cancel Transfer #define DMA_CR_ECX ((uint32_t)(1<<16)) // Error Cancel Transfer #define DMA_CR_EMLM ((uint32_t)0x80) // Enable Minor Loop Mapping #define DMA_CR_CLM ((uint32_t)0x40) // Continuous Link Mode #define DMA_CR_HALT ((uint32_t)0x20) // Halt DMA Operations #define DMA_CR_HOE ((uint32_t)0x10) // Halt On Error #define DMA_CR_ERCA ((uint32_t)0x04) // Enable Round Robin Channel Arbitration #define DMA_CR_EDBG ((uint32_t)0x02) // Enable Debug #define DMA_ES (*(volatile uint32_t *)0x40008004) // Error Status Register #define DMA_ERQ (*(volatile uint32_t *)0x4000800C) // Enable Request Register #define DMA_ERQ_ERQ0 ((uint32_t)1<<0) // Enable DMA Request 0 #define DMA_ERQ_ERQ1 ((uint32_t)1<<1) // Enable DMA Request 1 #define DMA_ERQ_ERQ2 ((uint32_t)1<<2) // Enable DMA Request 2 #define DMA_ERQ_ERQ3 ((uint32_t)1<<3) // Enable DMA Request 3 #define DMA_ERQ_ERQ4 ((uint32_t)1<<4) // Enable DMA Request 4 #define DMA_ERQ_ERQ5 ((uint32_t)1<<5) // Enable DMA Request 5 #define DMA_ERQ_ERQ6 ((uint32_t)1<<6) // Enable DMA Request 6 #define DMA_ERQ_ERQ7 ((uint32_t)1<<7) // Enable DMA Request 7 #define DMA_ERQ_ERQ8 ((uint32_t)1<<8) // Enable DMA Request 8 #define DMA_ERQ_ERQ9 ((uint32_t)1<<9) // Enable DMA Request 9 #define DMA_ERQ_ERQ10 ((uint32_t)1<<10) // Enable DMA Request 10 #define DMA_ERQ_ERQ11 ((uint32_t)1<<11) // Enable DMA Request 11 #define DMA_ERQ_ERQ12 ((uint32_t)1<<12) // Enable DMA Request 12 #define DMA_ERQ_ERQ13 ((uint32_t)1<<13) // Enable DMA Request 13 #define DMA_ERQ_ERQ14 ((uint32_t)1<<14) // Enable DMA Request 14 #define DMA_ERQ_ERQ15 ((uint32_t)1<<15) // Enable DMA Request 15 #define DMA_EEI (*(volatile uint32_t *)0x40008014) // Enable Error Interrupt Register #define DMA_EEI_EEI0 ((uint32_t)1<<0) // Enable Error Interrupt 0 #define DMA_EEI_EEI1 ((uint32_t)1<<1) // Enable Error Interrupt 1 #define DMA_EEI_EEI2 ((uint32_t)1<<2) // Enable Error Interrupt 2 #define DMA_EEI_EEI3 ((uint32_t)1<<3) // Enable Error Interrupt 3 #define DMA_EEI_EEI4 ((uint32_t)1<<4) // Enable Error Interrupt 4 #define DMA_EEI_EEI5 ((uint32_t)1<<5) // Enable Error Interrupt 5 #define DMA_EEI_EEI6 ((uint32_t)1<<6) // Enable Error Interrupt 6 #define DMA_EEI_EEI7 ((uint32_t)1<<7) // Enable Error Interrupt 7 #define DMA_EEI_EEI8 ((uint32_t)1<<8) // Enable Error Interrupt 8 #define DMA_EEI_EEI9 ((uint32_t)1<<9) // Enable Error Interrupt 9 #define DMA_EEI_EEI10 ((uint32_t)1<<10) // Enable Error Interrupt 10 #define DMA_EEI_EEI11 ((uint32_t)1<<11) // Enable Error Interrupt 11 #define DMA_EEI_EEI12 ((uint32_t)1<<12) // Enable Error Interrupt 12 #define DMA_EEI_EEI13 ((uint32_t)1<<13) // Enable Error Interrupt 13 #define DMA_EEI_EEI14 ((uint32_t)1<<14) // Enable Error Interrupt 14 #define DMA_EEI_EEI15 ((uint32_t)1<<15) // Enable Error Interrupt 15 #define DMA_CEEI (*(volatile uint8_t *)0x40008018) // Clear Enable Error Interrupt Register #define DMA_CEEI_CEEI(n) ((uint8_t)(n & 15)<<0) // Clear Enable Error Interrupt #define DMA_CEEI_CAEE ((uint8_t)1<<6) // Clear All Enable Error Interrupts #define DMA_CEEI_NOP ((uint8_t)1<<7) // NOP #define DMA_SEEI (*(volatile uint8_t *)0x40008019) // Set Enable Error Interrupt Register #define DMA_SEEI_SEEI(n) ((uint8_t)(n & 15)<<0) // Set Enable Error Interrupt #define DMA_SEEI_SAEE ((uint8_t)1<<6) // Set All Enable Error Interrupts #define DMA_SEEI_NOP ((uint8_t)1<<7) // NOP #define DMA_CERQ (*(volatile uint8_t *)0x4000801A) // Clear Enable Request Register #define DMA_CERQ_CERQ(n) ((uint8_t)(n & 15)<<0) // Clear Enable Request #define DMA_CERQ_CAER ((uint8_t)1<<6) // Clear All Enable Requests #define DMA_CERQ_NOP ((uint8_t)1<<7) // NOP #define DMA_SERQ (*(volatile uint8_t *)0x4000801B) // Set Enable Request Register #define DMA_SERQ_SERQ(n) ((uint8_t)(n & 15)<<0) // Set Enable Request #define DMA_SERQ_SAER ((uint8_t)1<<6) // Set All Enable Requests #define DMA_SERQ_NOP ((uint8_t)1<<7) // NOP #define DMA_CDNE (*(volatile uint8_t *)0x4000801C) // Clear DONE Status Bit Register #define DMA_CDNE_CDNE(n) ((uint8_t)(n & 15)<<0) // Clear Done Bit #define DMA_CDNE_CADN ((uint8_t)1<<6) // Clear All Done Bits #define DMA_CDNE_NOP ((uint8_t)1<<7) // NOP #define DMA_SSRT (*(volatile uint8_t *)0x4000801D) // Set START Bit Register #define DMA_SSRT_SSRT(n) ((uint8_t)(n & 15)<<0) // Set Start Bit #define DMA_SSRT_SAST ((uint8_t)1<<6) // Set All Start Bits #define DMA_SSRT_NOP ((uint8_t)1<<7) // NOP #define DMA_CERR (*(volatile uint8_t *)0x4000801E) // Clear Error Register #define DMA_CERR_CERR(n) ((uint8_t)(n & 15)<<0) // Clear Error Indicator #define DMA_CERR_CAEI ((uint8_t)1<<6) // Clear All Error Indicators #define DMA_CERR_NOP ((uint8_t)1<<7) // NOP #define DMA_CINT (*(volatile uint8_t *)0x4000801F) // Clear Interrupt Request Register #define DMA_CINT_CINT(n) ((uint8_t)(n & 15)<<0) // Clear Interrupt Request #define DMA_CINT_CAIR ((uint8_t)1<<6) // Clear All Interrupt Requests #define DMA_CINT_NOP ((uint8_t)1<<7) // NOP #define DMA_INT (*(volatile uint32_t *)0x40008024) // Interrupt Request Register #define DMA_INT_INT0 ((uint32_t)1<<0) // Interrupt Request 0 #define DMA_INT_INT1 ((uint32_t)1<<1) // Interrupt Request 1 #define DMA_INT_INT2 ((uint32_t)1<<2) // Interrupt Request 2 #define DMA_INT_INT3 ((uint32_t)1<<3) // Interrupt Request 3 #define DMA_INT_INT4 ((uint32_t)1<<4) // Interrupt Request 4 #define DMA_INT_INT5 ((uint32_t)1<<5) // Interrupt Request 5 #define DMA_INT_INT6 ((uint32_t)1<<6) // Interrupt Request 6 #define DMA_INT_INT7 ((uint32_t)1<<7) // Interrupt Request 7 #define DMA_INT_INT8 ((uint32_t)1<<8) // Interrupt Request 8 #define DMA_INT_INT9 ((uint32_t)1<<9) // Interrupt Request 9 #define DMA_INT_INT10 ((uint32_t)1<<10) // Interrupt Request 10 #define DMA_INT_INT11 ((uint32_t)1<<11) // Interrupt Request 11 #define DMA_INT_INT12 ((uint32_t)1<<12) // Interrupt Request 12 #define DMA_INT_INT13 ((uint32_t)1<<13) // Interrupt Request 13 #define DMA_INT_INT14 ((uint32_t)1<<14) // Interrupt Request 14 #define DMA_INT_INT15 ((uint32_t)1<<15) // Interrupt Request 15 #define DMA_ERR (*(volatile uint32_t *)0x4000802C) // Error Register #define DMA_ERR_ERR0 ((uint32_t)1<<0) // Error in Channel 0 #define DMA_ERR_ERR1 ((uint32_t)1<<1) // Error in Channel 1 #define DMA_ERR_ERR2 ((uint32_t)1<<2) // Error in Channel 2 #define DMA_ERR_ERR3 ((uint32_t)1<<3) // Error in Channel 3 #define DMA_ERR_ERR4 ((uint32_t)1<<4) // Error in Channel 4 #define DMA_ERR_ERR5 ((uint32_t)1<<5) // Error in Channel 5 #define DMA_ERR_ERR6 ((uint32_t)1<<6) // Error in Channel 6 #define DMA_ERR_ERR7 ((uint32_t)1<<7) // Error in Channel 7 #define DMA_ERR_ERR8 ((uint32_t)1<<8) // Error in Channel 8 #define DMA_ERR_ERR9 ((uint32_t)1<<9) // Error in Channel 9 #define DMA_ERR_ERR10 ((uint32_t)1<<10) // Error in Channel 10 #define DMA_ERR_ERR11 ((uint32_t)1<<11) // Error in Channel 11 #define DMA_ERR_ERR12 ((uint32_t)1<<12) // Error in Channel 12 #define DMA_ERR_ERR13 ((uint32_t)1<<13) // Error in Channel 13 #define DMA_ERR_ERR14 ((uint32_t)1<<14) // Error in Channel 14 #define DMA_ERR_ERR15 ((uint32_t)1<<15) // Error in Channel 15 #define DMA_HRS (*(volatile uint32_t *)0x40008034) // Hardware Request Status Register #define DMA_HRS_HRS0 ((uint32_t)1<<0) // Hardware Request Status Channel 0 #define DMA_HRS_HRS1 ((uint32_t)1<<1) // Hardware Request Status Channel 1 #define DMA_HRS_HRS2 ((uint32_t)1<<2) // Hardware Request Status Channel 2 #define DMA_HRS_HRS3 ((uint32_t)1<<3) // Hardware Request Status Channel 3 #define DMA_HRS_HRS4 ((uint32_t)1<<4) // Hardware Request Status Channel 4 #define DMA_HRS_HRS5 ((uint32_t)1<<5) // Hardware Request Status Channel 5 #define DMA_HRS_HRS6 ((uint32_t)1<<6) // Hardware Request Status Channel 6 #define DMA_HRS_HRS7 ((uint32_t)1<<7) // Hardware Request Status Channel 7 #define DMA_HRS_HRS8 ((uint32_t)1<<8) // Hardware Request Status Channel 8 #define DMA_HRS_HRS9 ((uint32_t)1<<9) // Hardware Request Status Channel 9 #define DMA_HRS_HRS10 ((uint32_t)1<<10) // Hardware Request Status Channel 10 #define DMA_HRS_HRS11 ((uint32_t)1<<11) // Hardware Request Status Channel 11 #define DMA_HRS_HRS12 ((uint32_t)1<<12) // Hardware Request Status Channel 12 #define DMA_HRS_HRS13 ((uint32_t)1<<13) // Hardware Request Status Channel 13 #define DMA_HRS_HRS14 ((uint32_t)1<<14) // Hardware Request Status Channel 14 #define DMA_HRS_HRS15 ((uint32_t)1<<15) // Hardware Request Status Channel 15 #define DMA_DCHPRI3 (*(volatile uint8_t *)0x40008100) // Channel n Priority Register #define DMA_DCHPRI2 (*(volatile uint8_t *)0x40008101) // Channel n Priority Register #define DMA_DCHPRI1 (*(volatile uint8_t *)0x40008102) // Channel n Priority Register #define DMA_DCHPRI0 (*(volatile uint8_t *)0x40008103) // Channel n Priority Register #define DMA_DCHPRI_CHPRI(n) ((uint8_t)(n & 15)<<0) // Channel Arbitration Priority #define DMA_DCHPRI_DPA ((uint8_t)1<<6) // Disable PreEmpt Ability #define DMA_DCHPRI_ECP ((uint8_t)1<<7) // Enable PreEmption #define DMA_DCHPRI7 (*(volatile uint8_t *)0x40008104) // Channel n Priority Register #define DMA_DCHPRI6 (*(volatile uint8_t *)0x40008105) // Channel n Priority Register #define DMA_DCHPRI5 (*(volatile uint8_t *)0x40008106) // Channel n Priority Register #define DMA_DCHPRI4 (*(volatile uint8_t *)0x40008107) // Channel n Priority Register #define DMA_DCHPRI11 (*(volatile uint8_t *)0x40008108) // Channel n Priority Register #define DMA_DCHPRI10 (*(volatile uint8_t *)0x40008109) // Channel n Priority Register #define DMA_DCHPRI9 (*(volatile uint8_t *)0x4000810A) // Channel n Priority Register #define DMA_DCHPRI8 (*(volatile uint8_t *)0x4000810B) // Channel n Priority Register #define DMA_DCHPRI15 (*(volatile uint8_t *)0x4000810C) // Channel n Priority Register #define DMA_DCHPRI14 (*(volatile uint8_t *)0x4000810D) // Channel n Priority Register #define DMA_DCHPRI13 (*(volatile uint8_t *)0x4000810E) // Channel n Priority Register #define DMA_DCHPRI12 (*(volatile uint8_t *)0x4000810F) // Channel n Priority Register #define DMA_TCD_ATTR_SMOD(n) (((n) & 0x1F) << 11) #define DMA_TCD_ATTR_SSIZE(n) (((n) & 0x7) << 8) #define DMA_TCD_ATTR_DMOD(n) (((n) & 0x1F) << 3) #define DMA_TCD_ATTR_DSIZE(n) (((n) & 0x7) << 0) #define DMA_TCD_ATTR_SIZE_8BIT 0 #define DMA_TCD_ATTR_SIZE_16BIT 1 #define DMA_TCD_ATTR_SIZE_32BIT 2 #define DMA_TCD_ATTR_SIZE_16BYTE 4 #define DMA_TCD_ATTR_SIZE_32BYTE 5 // caution: this might not be supported in newer chips? #define DMA_TCD_CSR_BWC(n) (((n) & 0x3) << 14) #define DMA_TCD_CSR_BWC_MASK 0xC000 #define DMA_TCD_CSR_MAJORLINKCH(n) (((n) & 0xF) << 8) #define DMA_TCD_CSR_MAJORLINKCH_MASK 0x0F00 #define DMA_TCD_CSR_DONE 0x0080 #define DMA_TCD_CSR_ACTIVE 0x0040 #define DMA_TCD_CSR_MAJORELINK 0x0020 #define DMA_TCD_CSR_ESG 0x0010 #define DMA_TCD_CSR_DREQ 0x0008 #define DMA_TCD_CSR_INTHALF 0x0004 #define DMA_TCD_CSR_INTMAJOR 0x0002 #define DMA_TCD_CSR_START 0x0001 #define DMA_TCD_CITER_MASK ((uint16_t)0x7FFF) // Loop count mask #define DMA_TCD_CITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete #define DMA_TCD_BITER_MASK ((uint16_t)0x7FFF) // Loop count mask #define DMA_TCD_BITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete #define DMA_TCD_BITER_ELINKYES_ELINK 0x8000 #define DMA_TCD_BITER_ELINKYES_LINKCH(n) (((n) & 0xF) << 9) #define DMA_TCD_BITER_ELINKYES_LINKCH_MASK 0x1E00 #define DMA_TCD_BITER_ELINKYES_BITER(n) (((n) & 0x1FF) << 0) #define DMA_TCD_BITER_ELINKYES_BITER_MASK 0x01FF #define DMA_TCD_CITER_ELINKYES_ELINK 0x8000 #define DMA_TCD_CITER_ELINKYES_LINKCH(n) (((n) & 0xF) << 9) #define DMA_TCD_CITER_ELINKYES_LINKCH_MASK 0x1E00 #define DMA_TCD_CITER_ELINKYES_CITER(n) (((n) & 0x1FF) << 0) #define DMA_TCD_CITER_ELINKYES_CITER_MASK 0x01FF #define DMA_TCD_NBYTES_SMLOE ((uint32_t)1<<31) // Source Minor Loop Offset Enable #define DMA_TCD_NBYTES_DMLOE ((uint32_t)1<<30) // Destination Minor Loop Offset Enable #define DMA_TCD_NBYTES_MLOFFNO_NBYTES(n) ((uint32_t)(n)) // NBytes transfer count when minor loop disabled #define DMA_TCD_NBYTES_MLOFFYES_NBYTES(n) ((uint32_t)(n & 0x1F)) // NBytes transfer count when minor loop enabled #define DMA_TCD_NBYTES_MLOFFYES_MLOFF(n) ((uint32_t)(n & 0xFFFFF)<<10) // Offset #define DMA_TCD0_SADDR (*(volatile const void * volatile *)0x40009000) // TCD Source Address #define DMA_TCD0_SOFF (*(volatile int16_t *)0x40009004) // TCD Signed Source Address Offset #define DMA_TCD0_ATTR (*(volatile uint16_t *)0x40009006) // TCD Transfer Attributes #define DMA_TCD0_NBYTES_MLNO (*(volatile uint32_t *)0x40009008) // TCD Minor Byte Count (Minor Loop Disabled) #define DMA_TCD0_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009008) // TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) #define DMA_TCD0_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009008) // TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) #define DMA_TCD0_SLAST (*(volatile int32_t *)0x4000900C) // TCD Last Source Address Adjustment #define DMA_TCD0_DADDR (*(volatile void * volatile *)0x40009010) // TCD Destination Address #define DMA_TCD0_DOFF (*(volatile int16_t *)0x40009014) // TCD Signed Destination Address Offset #define DMA_TCD0_CITER_ELINKYES (*(volatile uint16_t *)0x40009016) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD0_CITER_ELINKNO (*(volatile uint16_t *)0x40009016) // ?? #define DMA_TCD0_DLASTSGA (*(volatile int32_t *)0x40009018) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD0_CSR (*(volatile uint16_t *)0x4000901C) // TCD Control and Status #define DMA_TCD0_BITER_ELINKYES (*(volatile uint16_t *)0x4000901E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD0_BITER_ELINKNO (*(volatile uint16_t *)0x4000901E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled #define DMA_TCD1_SADDR (*(volatile const void * volatile *)0x40009020) // TCD Source Address #define DMA_TCD1_SOFF (*(volatile int16_t *)0x40009024) // TCD Signed Source Address Offset #define DMA_TCD1_ATTR (*(volatile uint16_t *)0x40009026) // TCD Transfer Attributes #define DMA_TCD1_NBYTES_MLNO (*(volatile uint32_t *)0x40009028) // TCD Minor Byte Count, Minor Loop Disabled #define DMA_TCD1_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009028) // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled #define DMA_TCD1_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009028) // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled #define DMA_TCD1_SLAST (*(volatile int32_t *)0x4000902C) // TCD Last Source Address Adjustment #define DMA_TCD1_DADDR (*(volatile void * volatile *)0x40009030) // TCD Destination Address #define DMA_TCD1_DOFF (*(volatile int16_t *)0x40009034) // TCD Signed Destination Address Offset #define DMA_TCD1_CITER_ELINKYES (*(volatile uint16_t *)0x40009036) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD1_CITER_ELINKNO (*(volatile uint16_t *)0x40009036) // ?? #define DMA_TCD1_DLASTSGA (*(volatile int32_t *)0x40009038) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD1_CSR (*(volatile uint16_t *)0x4000903C) // TCD Control and Status #define DMA_TCD1_BITER_ELINKYES (*(volatile uint16_t *)0x4000903E) // TCD Beginning Minor Loop Link, Major Loop Count Channel Linking Enabled #define DMA_TCD1_BITER_ELINKNO (*(volatile uint16_t *)0x4000903E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled #define DMA_TCD2_SADDR (*(volatile const void * volatile *)0x40009040) // TCD Source Address #define DMA_TCD2_SOFF (*(volatile int16_t *)0x40009044) // TCD Signed Source Address Offset #define DMA_TCD2_ATTR (*(volatile uint16_t *)0x40009046) // TCD Transfer Attributes #define DMA_TCD2_NBYTES_MLNO (*(volatile uint32_t *)0x40009048) // TCD Minor Byte Count, Minor Loop Disabled #define DMA_TCD2_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009048) // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled #define DMA_TCD2_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009048) // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled #define DMA_TCD2_SLAST (*(volatile int32_t *)0x4000904C) // TCD Last Source Address Adjustment #define DMA_TCD2_DADDR (*(volatile void * volatile *)0x40009050) // TCD Destination Address #define DMA_TCD2_DOFF (*(volatile int16_t *)0x40009054) // TCD Signed Destination Address Offset #define DMA_TCD2_CITER_ELINKYES (*(volatile uint16_t *)0x40009056) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD2_CITER_ELINKNO (*(volatile uint16_t *)0x40009056) // ?? #define DMA_TCD2_DLASTSGA (*(volatile int32_t *)0x40009058) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD2_CSR (*(volatile uint16_t *)0x4000905C) // TCD Control and Status #define DMA_TCD2_BITER_ELINKYES (*(volatile uint16_t *)0x4000905E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD2_BITER_ELINKNO (*(volatile uint16_t *)0x4000905E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled #define DMA_TCD3_SADDR (*(volatile const void * volatile *)0x40009060) // TCD Source Address #define DMA_TCD3_SOFF (*(volatile int16_t *)0x40009064) // TCD Signed Source Address Offset #define DMA_TCD3_ATTR (*(volatile uint16_t *)0x40009066) // TCD Transfer Attributes #define DMA_TCD3_NBYTES_MLNO (*(volatile uint32_t *)0x40009068) // TCD Minor Byte Count, Minor Loop Disabled #define DMA_TCD3_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009068) // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled #define DMA_TCD3_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009068) // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled #define DMA_TCD3_SLAST (*(volatile int32_t *)0x4000906C) // TCD Last Source Address Adjustment #define DMA_TCD3_DADDR (*(volatile void * volatile *)0x40009070) // TCD Destination Address #define DMA_TCD3_DOFF (*(volatile int16_t *)0x40009074) // TCD Signed Destination Address Offset #define DMA_TCD3_CITER_ELINKYES (*(volatile uint16_t *)0x40009076) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD3_CITER_ELINKNO (*(volatile uint16_t *)0x40009076) // ?? #define DMA_TCD3_DLASTSGA (*(volatile int32_t *)0x40009078) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD3_CSR (*(volatile uint16_t *)0x4000907C) // TCD Control and Status #define DMA_TCD3_BITER_ELINKYES (*(volatile uint16_t *)0x4000907E) // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Enabled #define DMA_TCD3_BITER_ELINKNO (*(volatile uint16_t *)0x4000907E) // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Disabled #define DMA_TCD4_SADDR (*(volatile const void * volatile *)0x40009080) // TCD Source Addr #define DMA_TCD4_SOFF (*(volatile int16_t *)0x40009084) // TCD Signed Source Address Offset #define DMA_TCD4_ATTR (*(volatile uint16_t *)0x40009086) // TCD Transfer Attributes #define DMA_TCD4_NBYTES_MLNO (*(volatile uint32_t *)0x40009088) // TCD Minor Byte Count #define DMA_TCD4_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009088) // TCD Signed Minor Loop Offset #define DMA_TCD4_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009088) // TCD Signed Minor Loop Offset #define DMA_TCD4_SLAST (*(volatile int32_t *)0x4000908C) // TCD Last Source Addr Adj. #define DMA_TCD4_DADDR (*(volatile void * volatile *)0x40009090) // TCD Destination Address #define DMA_TCD4_DOFF (*(volatile int16_t *)0x40009094) // TCD Signed Dest Address Offset #define DMA_TCD4_CITER_ELINKYES (*(volatile uint16_t *)0x40009096) // TCD Current Minor Loop Link #define DMA_TCD4_CITER_ELINKNO (*(volatile uint16_t *)0x40009096) // ?? #define DMA_TCD4_DLASTSGA (*(volatile int32_t *)0x40009098) // TCD Last Destination Addr Adj #define DMA_TCD4_CSR (*(volatile uint16_t *)0x4000909C) // TCD Control and Status #define DMA_TCD4_BITER_ELINKYES (*(volatile uint16_t *)0x4000909E) // TCD Beginning Minor Loop Link #define DMA_TCD4_BITER_ELINKNO (*(volatile uint16_t *)0x4000909E) // TCD Beginning Minor Loop Link #define DMA_TCD5_SADDR (*(volatile const void * volatile *)0x400090A0) // TCD Source Addr #define DMA_TCD5_SOFF (*(volatile int16_t *)0x400090A4) // TCD Signed Source Address Offset #define DMA_TCD5_ATTR (*(volatile uint16_t *)0x400090A6) // TCD Transfer Attributes #define DMA_TCD5_NBYTES_MLNO (*(volatile uint32_t *)0x400090A8) // TCD Minor Byte Count #define DMA_TCD5_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400090A8) // TCD Signed Minor Loop Offset #define DMA_TCD5_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400090A8) // TCD Signed Minor Loop Offset #define DMA_TCD5_SLAST (*(volatile int32_t *)0x400090AC) // TCD Last Source Addr Adj. #define DMA_TCD5_DADDR (*(volatile void * volatile *)0x400090B0) // TCD Destination Address #define DMA_TCD5_DOFF (*(volatile int16_t *)0x400090B4) // TCD Signed Dest Address Offset #define DMA_TCD5_CITER_ELINKYES (*(volatile uint16_t *)0x400090B6) // TCD Current Minor Loop Link #define DMA_TCD5_CITER_ELINKNO (*(volatile uint16_t *)0x400090B6) // ?? #define DMA_TCD5_DLASTSGA (*(volatile int32_t *)0x400090B8) // TCD Last Destination Addr Adj #define DMA_TCD5_CSR (*(volatile uint16_t *)0x400090BC) // TCD Control and Status #define DMA_TCD5_BITER_ELINKYES (*(volatile uint16_t *)0x400090BE) // TCD Beginning Minor Loop Link #define DMA_TCD5_BITER_ELINKNO (*(volatile uint16_t *)0x400090BE) // TCD Beginning Minor Loop Link #define DMA_TCD6_SADDR (*(volatile const void * volatile *)0x400090C0) // TCD Source Addr #define DMA_TCD6_SOFF (*(volatile int16_t *)0x400090C4) // TCD Signed Source Address Offset #define DMA_TCD6_ATTR (*(volatile uint16_t *)0x400090C6) // TCD Transfer Attributes #define DMA_TCD6_NBYTES_MLNO (*(volatile uint32_t *)0x400090C8) // TCD Minor Byte Count #define DMA_TCD6_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400090C8) // TCD Signed Minor Loop Offset #define DMA_TCD6_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400090C8) // TCD Signed Minor Loop Offset #define DMA_TCD6_SLAST (*(volatile int32_t *)0x400090CC) // TCD Last Source Addr Adj. #define DMA_TCD6_DADDR (*(volatile void * volatile *)0x400090D0) // TCD Destination Address #define DMA_TCD6_DOFF (*(volatile int16_t *)0x400090D4) // TCD Signed Dest Address Offset #define DMA_TCD6_CITER_ELINKYES (*(volatile uint16_t *)0x400090D6) // TCD Current Minor Loop Link #define DMA_TCD6_CITER_ELINKNO (*(volatile uint16_t *)0x400090D6) // ?? #define DMA_TCD6_DLASTSGA (*(volatile int32_t *)0x400090D8) // TCD Last Destination Addr Adj #define DMA_TCD6_CSR (*(volatile uint16_t *)0x400090DC) // TCD Control and Status #define DMA_TCD6_BITER_ELINKYES (*(volatile uint16_t *)0x400090DE) // TCD Beginning Minor Loop Link #define DMA_TCD6_BITER_ELINKNO (*(volatile uint16_t *)0x400090DE) // TCD Beginning Minor Loop Link #define DMA_TCD7_SADDR (*(volatile const void * volatile *)0x400090E0) // TCD Source Addr #define DMA_TCD7_SOFF (*(volatile int16_t *)0x400090E4) // TCD Signed Source Address Offset #define DMA_TCD7_ATTR (*(volatile uint16_t *)0x400090E6) // TCD Transfer Attributes #define DMA_TCD7_NBYTES_MLNO (*(volatile uint32_t *)0x400090E8) // TCD Minor Byte Count #define DMA_TCD7_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400090E8) // TCD Signed Minor Loop Offset #define DMA_TCD7_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400090E8) // TCD Signed Minor Loop Offset #define DMA_TCD7_SLAST (*(volatile int32_t *)0x400090EC) // TCD Last Source Addr Adj. #define DMA_TCD7_DADDR (*(volatile void * volatile *)0x400090F0) // TCD Destination Address #define DMA_TCD7_DOFF (*(volatile int16_t *)0x400090F4) // TCD Signed Dest Address Offset #define DMA_TCD7_CITER_ELINKYES (*(volatile uint16_t *)0x400090F6) // TCD Current Minor Loop Link #define DMA_TCD7_CITER_ELINKNO (*(volatile uint16_t *)0x400090F6) // ?? #define DMA_TCD7_DLASTSGA (*(volatile int32_t *)0x400090F8) // TCD Last Destination Addr Adj #define DMA_TCD7_CSR (*(volatile uint16_t *)0x400090FC) // TCD Control and Status #define DMA_TCD7_BITER_ELINKYES (*(volatile uint16_t *)0x400090FE) // TCD Beginning Minor Loop Link #define DMA_TCD7_BITER_ELINKNO (*(volatile uint16_t *)0x400090FE) // TCD Beginning Minor Loop Link #define DMA_TCD8_SADDR (*(volatile const void * volatile *)0x40009100) // TCD Source Addr #define DMA_TCD8_SOFF (*(volatile int16_t *)0x40009104) // TCD Signed Source Address Offset #define DMA_TCD8_ATTR (*(volatile uint16_t *)0x40009106) // TCD Transfer Attributes #define DMA_TCD8_NBYTES_MLNO (*(volatile uint32_t *)0x40009108) // TCD Minor Byte Count #define DMA_TCD8_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009108) // TCD Signed Minor Loop Offset #define DMA_TCD8_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009108) // TCD Signed Minor Loop Offset #define DMA_TCD8_SLAST (*(volatile int32_t *)0x4000910C) // TCD Last Source Addr Adj. #define DMA_TCD8_DADDR (*(volatile void * volatile *)0x40009110) // TCD Destination Address #define DMA_TCD8_DOFF (*(volatile int16_t *)0x40009114) // TCD Signed Dest Address Offset #define DMA_TCD8_CITER_ELINKYES (*(volatile uint16_t *)0x40009116) // TCD Current Minor Loop Link #define DMA_TCD8_CITER_ELINKNO (*(volatile uint16_t *)0x40009116) // ?? #define DMA_TCD8_DLASTSGA (*(volatile int32_t *)0x40009118) // TCD Last Destination Addr Adj #define DMA_TCD8_CSR (*(volatile uint16_t *)0x4000911C) // TCD Control and Status #define DMA_TCD8_BITER_ELINKYES (*(volatile uint16_t *)0x4000911E) // TCD Beginning Minor Loop Link #define DMA_TCD8_BITER_ELINKNO (*(volatile uint16_t *)0x4000911E) // TCD Beginning Minor Loop Link #define DMA_TCD9_SADDR (*(volatile const void * volatile *)0x40009120) // TCD Source Addr #define DMA_TCD9_SOFF (*(volatile int16_t *)0x40009124) // TCD Signed Source Address Offset #define DMA_TCD9_ATTR (*(volatile uint16_t *)0x40009126) // TCD Transfer Attributes #define DMA_TCD9_NBYTES_MLNO (*(volatile uint32_t *)0x40009128) // TCD Minor Byte Count #define DMA_TCD9_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009128) // TCD Signed Minor Loop Offset #define DMA_TCD9_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009128) // TCD Signed Minor Loop Offset #define DMA_TCD9_SLAST (*(volatile int32_t *)0x4000912C) // TCD Last Source Addr Adj. #define DMA_TCD9_DADDR (*(volatile void * volatile *)0x40009130) // TCD Destination Address #define DMA_TCD9_DOFF (*(volatile int16_t *)0x40009134) // TCD Signed Dest Address Offset #define DMA_TCD9_CITER_ELINKYES (*(volatile uint16_t *)0x40009136) // TCD Current Minor Loop Link #define DMA_TCD9_CITER_ELINKNO (*(volatile uint16_t *)0x40009136) // ?? #define DMA_TCD9_DLASTSGA (*(volatile int32_t *)0x40009138) // TCD Last Destination Addr Adj #define DMA_TCD9_CSR (*(volatile uint16_t *)0x4000913C) // TCD Control and Status #define DMA_TCD9_BITER_ELINKYES (*(volatile uint16_t *)0x4000913E) // TCD Beginning Minor Loop Link #define DMA_TCD9_BITER_ELINKNO (*(volatile uint16_t *)0x4000913E) // TCD Beginning Minor Loop Link #define DMA_TCD10_SADDR (*(volatile const void * volatile *)0x40009140) // TCD Source Addr #define DMA_TCD10_SOFF (*(volatile int16_t *)0x40009144) // TCD Signed Source Address Offset #define DMA_TCD10_ATTR (*(volatile uint16_t *)0x40009146) // TCD Transfer Attributes #define DMA_TCD10_NBYTES_MLNO (*(volatile uint32_t *)0x40009148) // TCD Minor Byte Count #define DMA_TCD10_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009148) // TCD Signed Minor Loop Offset #define DMA_TCD10_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009148) // TCD Signed Minor Loop Offset #define DMA_TCD10_SLAST (*(volatile int32_t *)0x4000914C) // TCD Last Source Addr Adj. #define DMA_TCD10_DADDR (*(volatile void * volatile *)0x40009150) // TCD Destination Address #define DMA_TCD10_DOFF (*(volatile int16_t *)0x40009154) // TCD Signed Dest Address Offset #define DMA_TCD10_CITER_ELINKYES (*(volatile uint16_t *)0x40009156) // TCD Current Minor Loop Link #define DMA_TCD10_CITER_ELINKNO (*(volatile uint16_t *)0x40009156) // ?? #define DMA_TCD10_DLASTSGA (*(volatile int32_t *)0x40009158) // TCD Last Destination Addr Adj #define DMA_TCD10_CSR (*(volatile uint16_t *)0x4000915C) // TCD Control and Status #define DMA_TCD10_BITER_ELINKYES (*(volatile uint16_t *)0x4000915E) // TCD Beginning Minor Loop Link #define DMA_TCD10_BITER_ELINKNO (*(volatile uint16_t *)0x4000915E) // TCD Beginning Minor Loop Link #define DMA_TCD11_SADDR (*(volatile const void * volatile *)0x40009160) // TCD Source Addr #define DMA_TCD11_SOFF (*(volatile int16_t *)0x40009164) // TCD Signed Source Address Offset #define DMA_TCD11_ATTR (*(volatile uint16_t *)0x40009166) // TCD Transfer Attributes #define DMA_TCD11_NBYTES_MLNO (*(volatile uint32_t *)0x40009168) // TCD Minor Byte Count #define DMA_TCD11_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009168) // TCD Signed Minor Loop Offset #define DMA_TCD11_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009168) // TCD Signed Minor Loop Offset #define DMA_TCD11_SLAST (*(volatile int32_t *)0x4000916C) // TCD Last Source Addr Adj. #define DMA_TCD11_DADDR (*(volatile void * volatile *)0x40009170) // TCD Destination Address #define DMA_TCD11_DOFF (*(volatile int16_t *)0x40009174) // TCD Signed Dest Address Offset #define DMA_TCD11_CITER_ELINKYES (*(volatile uint16_t *)0x40009176) // TCD Current Minor Loop Link #define DMA_TCD11_CITER_ELINKNO (*(volatile uint16_t *)0x40009176) // ?? #define DMA_TCD11_DLASTSGA (*(volatile int32_t *)0x40009178) // TCD Last Destination Addr Adj #define DMA_TCD11_CSR (*(volatile uint16_t *)0x4000917C) // TCD Control and Status #define DMA_TCD11_BITER_ELINKYES (*(volatile uint16_t *)0x4000917E) // TCD Beginning Minor Loop Link #define DMA_TCD11_BITER_ELINKNO (*(volatile uint16_t *)0x4000917E) // TCD Beginning Minor Loop Link #define DMA_TCD12_SADDR (*(volatile const void * volatile *)0x40009180) // TCD Source Addr #define DMA_TCD12_SOFF (*(volatile int16_t *)0x40009184) // TCD Signed Source Address Offset #define DMA_TCD12_ATTR (*(volatile uint16_t *)0x40009186) // TCD Transfer Attributes #define DMA_TCD12_NBYTES_MLNO (*(volatile uint32_t *)0x40009188) // TCD Minor Byte Count #define DMA_TCD12_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009188) // TCD Signed Minor Loop Offset #define DMA_TCD12_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009188) // TCD Signed Minor Loop Offset #define DMA_TCD12_SLAST (*(volatile int32_t *)0x4000918C) // TCD Last Source Addr Adj. #define DMA_TCD12_DADDR (*(volatile void * volatile *)0x40009190) // TCD Destination Address #define DMA_TCD12_DOFF (*(volatile int16_t *)0x40009194) // TCD Signed Dest Address Offset #define DMA_TCD12_CITER_ELINKYES (*(volatile uint16_t *)0x40009196) // TCD Current Minor Loop Link #define DMA_TCD12_CITER_ELINKNO (*(volatile uint16_t *)0x40009196) // ?? #define DMA_TCD12_DLASTSGA (*(volatile int32_t *)0x40009198) // TCD Last Destination Addr Adj #define DMA_TCD12_CSR (*(volatile uint16_t *)0x4000919C) // TCD Control and Status #define DMA_TCD12_BITER_ELINKYES (*(volatile uint16_t *)0x4000919E) // TCD Beginning Minor Loop Link #define DMA_TCD12_BITER_ELINKNO (*(volatile uint16_t *)0x4000919E) // TCD Beginning Minor Loop Link #define DMA_TCD13_SADDR (*(volatile const void * volatile *)0x400091A0) // TCD Source Addr #define DMA_TCD13_SOFF (*(volatile int16_t *)0x400091A4) // TCD Signed Source Address Offset #define DMA_TCD13_ATTR (*(volatile uint16_t *)0x400091A6) // TCD Transfer Attributes #define DMA_TCD13_NBYTES_MLNO (*(volatile uint32_t *)0x400091A8) // TCD Minor Byte Count #define DMA_TCD13_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400091A8) // TCD Signed Minor Loop Offset #define DMA_TCD13_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400091A8) // TCD Signed Minor Loop Offset #define DMA_TCD13_SLAST (*(volatile int32_t *)0x400091AC) // TCD Last Source Addr Adj. #define DMA_TCD13_DADDR (*(volatile void * volatile *)0x400091B0) // TCD Destination Address #define DMA_TCD13_DOFF (*(volatile int16_t *)0x400091B4) // TCD Signed Dest Address Offset #define DMA_TCD13_CITER_ELINKYES (*(volatile uint16_t *)0x400091B6) // TCD Current Minor Loop Link #define DMA_TCD13_CITER_ELINKNO (*(volatile uint16_t *)0x400091B6) // ?? #define DMA_TCD13_DLASTSGA (*(volatile int32_t *)0x400091B8) // TCD Last Destination Addr Adj #define DMA_TCD13_CSR (*(volatile uint16_t *)0x400091BC) // TCD Control and Status #define DMA_TCD13_BITER_ELINKYES (*(volatile uint16_t *)0x400091BE) // TCD Beginning Minor Loop Link #define DMA_TCD13_BITER_ELINKNO (*(volatile uint16_t *)0x400091BE) // TCD Beginning Minor Loop Link #define DMA_TCD14_SADDR (*(volatile const void * volatile *)0x400091C0) // TCD Source Addr #define DMA_TCD14_SOFF (*(volatile int16_t *)0x400091C4) // TCD Signed Source Address Offset #define DMA_TCD14_ATTR (*(volatile uint16_t *)0x400091C6) // TCD Transfer Attributes #define DMA_TCD14_NBYTES_MLNO (*(volatile uint32_t *)0x400091C8) // TCD Minor Byte Count #define DMA_TCD14_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400091C8) // TCD Signed Minor Loop Offset #define DMA_TCD14_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400091C8) // TCD Signed Minor Loop Offset #define DMA_TCD14_SLAST (*(volatile int32_t *)0x400091CC) // TCD Last Source Addr Adj. #define DMA_TCD14_DADDR (*(volatile void * volatile *)0x400091D0) // TCD Destination Address #define DMA_TCD14_DOFF (*(volatile int16_t *)0x400091D4) // TCD Signed Dest Address Offset #define DMA_TCD14_CITER_ELINKYES (*(volatile uint16_t *)0x400091D6) // TCD Current Minor Loop Link #define DMA_TCD14_CITER_ELINKNO (*(volatile uint16_t *)0x400091D6) // ?? #define DMA_TCD14_DLASTSGA (*(volatile int32_t *)0x400091D8) // TCD Last Destination Addr Adj #define DMA_TCD14_CSR (*(volatile uint16_t *)0x400091DC) // TCD Control and Status #define DMA_TCD14_BITER_ELINKYES (*(volatile uint16_t *)0x400091DE) // TCD Beginning Minor Loop Link #define DMA_TCD14_BITER_ELINKNO (*(volatile uint16_t *)0x400091DE) // TCD Beginning Minor Loop Link #define DMA_TCD15_SADDR (*(volatile const void * volatile *)0x400091E0) // TCD Source Addr #define DMA_TCD15_SOFF (*(volatile int16_t *)0x400091E4) // TCD Signed Source Address Offset #define DMA_TCD15_ATTR (*(volatile uint16_t *)0x400091E6) // TCD Transfer Attributes #define DMA_TCD15_NBYTES_MLNO (*(volatile uint32_t *)0x400091E8) // TCD Minor Byte Count #define DMA_TCD15_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400091E8) // TCD Signed Minor Loop Offset #define DMA_TCD15_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400091E8) // TCD Signed Minor Loop Offset #define DMA_TCD15_SLAST (*(volatile int32_t *)0x400091EC) // TCD Last Source Addr Adj. #define DMA_TCD15_DADDR (*(volatile void * volatile *)0x400091F0) // TCD Destination Address #define DMA_TCD15_DOFF (*(volatile int16_t *)0x400091F4) // TCD Signed Dest Address Offset #define DMA_TCD15_CITER_ELINKYES (*(volatile uint16_t *)0x400091F6) // TCD Current Minor Loop Link #define DMA_TCD15_CITER_ELINKNO (*(volatile uint16_t *)0x400091F6) // ?? #define DMA_TCD15_DLASTSGA (*(volatile int32_t *)0x400091F8) // TCD Last Destination Addr Adj #define DMA_TCD15_CSR (*(volatile uint16_t *)0x400091FC) // TCD Control and Status #define DMA_TCD15_BITER_ELINKYES (*(volatile uint16_t *)0x400091FE) // TCD Beginning Minor Loop Link #define DMA_TCD15_BITER_ELINKNO (*(volatile uint16_t *)0x400091FE) // TCD Beginning Minor Loop Link #elif defined(KINETISL) #define DMA_SAR0 (*(volatile const void * volatile *)0x40008100) // Source Address #define DMA_DAR0 (*(volatile void * volatile *)0x40008104) // Destination Address #define DMA_DSR_BCR0 (*(volatile uint32_t *)0x40008108) // Status / Byte Count #define DMA_DCR0 (*(volatile uint32_t *)0x4000810C) // Control #define DMA_SAR1 (*(volatile const void * volatile *)0x40008110) // Source Address #define DMA_DAR1 (*(volatile void * volatile *)0x40008114) // Destination Address #define DMA_DSR_BCR1 (*(volatile uint32_t *)0x40008118) // Status / Byte Count #define DMA_DCR1 (*(volatile uint32_t *)0x4000811C) // Control #define DMA_SAR2 (*(volatile const void * volatile *)0x40008120) // Source Address #define DMA_DAR2 (*(volatile void * volatile *)0x40008124) // Destination Address #define DMA_DSR_BCR2 (*(volatile uint32_t *)0x40008128) // Status / Byte Count #define DMA_DCR2 (*(volatile uint32_t *)0x4000812C) // Control #define DMA_SAR3 (*(volatile const void * volatile *)0x40008130) // Source Address #define DMA_DAR3 (*(volatile void * volatile *)0x40008134) // Destination Address #define DMA_DSR_BCR3 (*(volatile uint32_t *)0x40008138) // Status / Byte Count #define DMA_DCR3 (*(volatile uint32_t *)0x4000813C) // Control #define DMA_DSR_BCR_CE ((uint32_t)0x40000000) // Configuration Error #define DMA_DSR_BCR_BES ((uint32_t)0x20000000) // Bus Error on Source #define DMA_DSR_BCR_BED ((uint32_t)0x10000000) // Bus Error on Destination #define DMA_DSR_BCR_REQ ((uint32_t)0x04000000) // Request #define DMA_DSR_BCR_BSY ((uint32_t)0x02000000) // Busy #define DMA_DSR_BCR_DONE ((uint32_t)0x01000000) // Transactions Done #define DMA_DSR_BCR_BCR(n) ((n) & 0x00FFFFFF) // Byte Count Remaining #define DMA_DCR_EINT ((uint32_t)0x80000000) // Enable Interrupt on Completion #define DMA_DCR_ERQ ((uint32_t)0x40000000) // Enable Peripheral Request #define DMA_DCR_CS ((uint32_t)0x20000000) // Cycle Steal #define DMA_DCR_AA ((uint32_t)0x10000000) // Auto-align #define DMA_DCR_EADREQ ((uint32_t)0x00800000) // Enable asynchronous DMA requests #define DMA_DCR_SINC ((uint32_t)0x00400000) // Source Increment #define DMA_DCR_SSIZE(n) (((n) & 3) << 20) // Source Size, 0=32, 1=8, 2=16 #define DMA_DCR_DINC ((uint32_t)0x00080000) // Destination Increment #define DMA_DCR_DSIZE(n) (((n) & 3) << 17) // Dest Size, 0=32, 1=8, 2=16 #define DMA_DCR_START ((uint32_t)0x00010000) // Start Transfer #define DMA_DCR_SMOD(n) (((n) & 15) << 12) // Source Address Modulo #define DMA_DCR_DMOD(n) (((n) & 15) << 8) // Destination Address Modulo #define DMA_DCR_D_REQ ((uint32_t)0x00000080) // Disable Request #define DMA_DCR_LINKCC(n) (((n) & 3) << 4) // Link Channel Control #define DMA_DCR_LCH1(n) (((n) & 3) << 2) // Link Channel 1 #define DMA_DCR_LCH2(n) (((n) & 3) << 0) // Link Channel 2 #endif // Chapter 22: External Watchdog Monitor (EWM) #define EWM_CTRL (*(volatile uint8_t *)0x40061000) // Control Register #define EWM_SERV (*(volatile uint8_t *)0x40061001) // Service Register #define EWM_CMPL (*(volatile uint8_t *)0x40061002) // Compare Low Register #define EWM_CMPH (*(volatile uint8_t *)0x40061003) // Compare High Register // Chapter 23: Watchdog Timer (WDOG) #define WDOG_STCTRLH (*(volatile uint16_t *)0x40052000) // Watchdog Status and Control Register High #define WDOG_STCTRLH_DISTESTWDOG ((uint16_t)0x4000) // Allows the WDOG's functional test mode to be disabled permanently. #define WDOG_STCTRLH_BYTESEL(n) ((uint16_t)(((n) & 3) << 12)) // selects the byte to be tested when the watchdog is in the byte test mode. #define WDOG_STCTRLH_TESTSEL ((uint16_t)0x0800) #define WDOG_STCTRLH_TESTWDOG ((uint16_t)0x0400) #define WDOG_STCTRLH_WAITEN ((uint16_t)0x0080) #define WDOG_STCTRLH_STOPEN ((uint16_t)0x0040) #define WDOG_STCTRLH_DBGEN ((uint16_t)0x0020) #define WDOG_STCTRLH_ALLOWUPDATE ((uint16_t)0x0010) #define WDOG_STCTRLH_WINEN ((uint16_t)0x0008) #define WDOG_STCTRLH_IRQRSTEN ((uint16_t)0x0004) #define WDOG_STCTRLH_CLKSRC ((uint16_t)0x0002) #define WDOG_STCTRLH_WDOGEN ((uint16_t)0x0001) #define WDOG_STCTRLL (*(volatile uint16_t *)0x40052002) // Watchdog Status and Control Register Low #define WDOG_TOVALH (*(volatile uint16_t *)0x40052004) // Watchdog Time-out Value Register High #define WDOG_TOVALL (*(volatile uint16_t *)0x40052006) // Watchdog Time-out Value Register Low #define WDOG_WINH (*(volatile uint16_t *)0x40052008) // Watchdog Window Register High #define WDOG_WINL (*(volatile uint16_t *)0x4005200A) // Watchdog Window Register Low #define WDOG_REFRESH (*(volatile uint16_t *)0x4005200C) // Watchdog Refresh register #define WDOG_UNLOCK (*(volatile uint16_t *)0x4005200E) // Watchdog Unlock register #define WDOG_UNLOCK_SEQ1 ((uint16_t)0xC520) #define WDOG_UNLOCK_SEQ2 ((uint16_t)0xD928) #define WDOG_TMROUTH (*(volatile uint16_t *)0x40052010) // Watchdog Timer Output Register High #define WDOG_TMROUTL (*(volatile uint16_t *)0x40052012) // Watchdog Timer Output Register Low #define WDOG_RSTCNT (*(volatile uint16_t *)0x40052014) // Watchdog Reset Count register #define WDOG_PRESC (*(volatile uint16_t *)0x40052016) // Watchdog Prescaler register // Chapter 24: Multipurpose Clock Generator (MCG) #define MCG_C1 (*(volatile uint8_t *)0x40064000) // MCG Control 1 Register #define MCG_C1_IREFSTEN ((uint8_t)0x01) // Internal Reference Stop Enable, Controls whether or not the internal reference clock remains enabled when the MCG enters Stop mode. #define MCG_C1_IRCLKEN ((uint8_t)0x02) // Internal Reference Clock Enable, Enables the internal reference clock for use as MCGIRCLK. #define MCG_C1_IREFS ((uint8_t)0x04) // Internal Reference Select, Selects the reference clock source for the FLL. #define MCG_C1_FRDIV(n) ((uint8_t)(((n) & 0x07) << 3)) // FLL External Reference Divider, Selects the amount to divide down the external reference clock for the FLL #define MCG_C1_CLKS(n) ((uint8_t)(((n) & 0x03) << 6)) // Clock Source Select, Selects the clock source for MCGOUTCLK #define MCG_C2 (*(volatile uint8_t *)0x40064001) // MCG Control 2 Register #define MCG_C2_IRCS ((uint8_t)0x01) // Internal Reference Clock Select, Selects between the fast or slow internal reference clock source. #define MCG_C2_LP ((uint8_t)0x02) // Low Power Select, Controls whether the FLL or PLL is disabled in BLPI and BLPE modes. #define MCG_C2_EREFS ((uint8_t)0x04) // External Reference Select, Selects the source for the external reference clock. #define MCG_C2_HGO0 ((uint8_t)0x08) // High Gain Oscillator Select, Controls the crystal oscillator mode of operation #define MCG_C2_RANGE0(n) ((uint8_t)(((n) & 0x03) << 4)) // Frequency Range Select, Selects the frequency range for the crystal oscillator #define MCG_C2_LOCRE0 ((uint8_t)0x80) // Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0 #define MCG_C3 (*(volatile uint8_t *)0x40064002) // MCG Control 3 Register #define MCG_C3_SCTRIM(n) ((uint8_t)(n)) // Slow Internal Reference Clock Trim Setting #define MCG_C4 (*(volatile uint8_t *)0x40064003) // MCG Control 4 Register #define MCG_C4_SCFTRIM ((uint8_t)0x01) // Slow Internal Reference Clock Fine Trim #define MCG_C4_FCTRIM(n) ((uint8_t)(((n) & 0x0F) << 1)) // Fast Internal Reference Clock Trim Setting #define MCG_C4_DRST_DRS(n) ((uint8_t)(((n) & 0x03) << 5)) // DCO Range Select #define MCG_C4_DMX32 ((uint8_t)0x80) // DCO Maximum Frequency with 32.768 kHz Reference, controls whether the DCO frequency range is narrowed #define MCG_C5 (*(volatile uint8_t *)0x40064004) // MCG Control 5 Register #define MCG_C5_PRDIV0(n) ((uint8_t)((n) & 0x1F)) // PLL External Reference Divider #define MCG_C5_PLLSTEN0 ((uint8_t)0x20) // PLL Stop Enable #define MCG_C5_PLLCLKEN0 ((uint8_t)0x40) // PLL Clock Enable #define MCG_C6 (*(volatile uint8_t *)0x40064005) // MCG Control 6 Register #define MCG_C6_VDIV0(n) ((uint8_t)((n) & 0x1F)) // VCO 0 Divider #define MCG_C6_CME0 ((uint8_t)0x20) // Clock Monitor Enable #define MCG_C6_PLLS ((uint8_t)0x40) // PLL Select, Controls whether the PLL or FLL output is selected as the MCG source when CLKS[1:0]=00. #define MCG_C6_LOLIE0 ((uint8_t)0x80) // Loss of Lock Interrrupt Enable #define MCG_S (*(volatile uint8_t *)0x40064006) // MCG Status Register #define MCG_S_IRCST ((uint8_t)0x01) // Internal Reference Clock Status #define MCG_S_OSCINIT0 ((uint8_t)0x02) // OSC Initialization, resets to 0, is set to 1 after the initialization cycles of the crystal oscillator #define MCG_S_CLKST(n) ((uint8_t)(((n) & 0x03) << 2)) // Clock Mode Status, 0=FLL is selected, 1= Internal ref, 2=External ref, 3=PLL #define MCG_S_CLKST_MASK ((uint8_t)0x0C) #define MCG_S_IREFST ((uint8_t)0x10) // Internal Reference Status #define MCG_S_PLLST ((uint8_t)0x20) // PLL Select Status #define MCG_S_LOCK0 ((uint8_t)0x40) // Lock Status, 0=PLL Unlocked, 1=PLL Locked #define MCG_S_LOLS0 ((uint8_t)0x80) // Loss of Lock Status #define MCG_SC (*(volatile uint8_t *)0x40064008) // MCG Status and Control Register #define MCG_SC_LOCS0 ((uint8_t)0x01) // OSC0 Loss of Clock Status #define MCG_SC_FCRDIV(n) ((uint8_t)(((n) & 0x07) << 1)) // Fast Clock Internal Reference Divider #define MCG_SC_FLTPRSRV ((uint8_t)0x10) // FLL Filter Preserve Enable #define MCG_SC_ATMF ((uint8_t)0x20) // Automatic Trim Machine Fail Flag #define MCG_SC_ATMS ((uint8_t)0x40) // Automatic Trim Machine Select #define MCG_SC_ATME ((uint8_t)0x80) // Automatic Trim Machine Enable #define MCG_ATCVH (*(volatile uint8_t *)0x4006400A) // MCG Auto Trim Compare Value High Register #define MCG_ATCVL (*(volatile uint8_t *)0x4006400B) // MCG Auto Trim Compare Value Low Register #define MCG_C7 (*(volatile uint8_t *)0x4006400C) // MCG Control 7 Register #define MCG_C8 (*(volatile uint8_t *)0x4006400D) // MCG Control 8 Register // Chapter 25: Oscillator (OSC) #define OSC0_CR (*(volatile uint8_t *)0x40065000) // OSC Control Register #define OSC_SC16P ((uint8_t)0x01) // Oscillator 16 pF Capacitor Load Configure #define OSC_SC8P ((uint8_t)0x02) // Oscillator 8 pF Capacitor Load Configure #define OSC_SC4P ((uint8_t)0x04) // Oscillator 4 pF Capacitor Load Configure #define OSC_SC2P ((uint8_t)0x08) // Oscillator 2 pF Capacitor Load Configure #define OSC_EREFSTEN ((uint8_t)0x20) // External Reference Stop Enable, Controls whether or not the external reference clock (OSCERCLK) remains enabled when MCU enters Stop mode. #define OSC_ERCLKEN ((uint8_t)0x80) // External Reference Enable, Enables external reference clock (OSCERCLK). // Chapter 27: Flash Memory Controller (FMC) #define FMC_PFAPR (*(volatile uint32_t *)0x4001F000) // Flash Access Protection #define FMC_PFB0CR (*(volatile uint32_t *)0x4001F004) // Flash Control #define FMC_TAGVDW0S0 (*(volatile uint32_t *)0x4001F100) // Cache Tag Storage #define FMC_TAGVDW0S1 (*(volatile uint32_t *)0x4001F104) // Cache Tag Storage #define FMC_TAGVDW1S0 (*(volatile uint32_t *)0x4001F108)// Cache Tag Storage #define FMC_TAGVDW1S1 (*(volatile uint32_t *)0x4001F10C)// Cache Tag Storage #define FMC_TAGVDW2S0 (*(volatile uint32_t *)0x4001F110)// Cache Tag Storage #define FMC_TAGVDW2S1 (*(volatile uint32_t *)0x4001F114)// Cache Tag Storage #define FMC_TAGVDW3S0 (*(volatile uint32_t *)0x4001F118)// Cache Tag Storage #define FMC_TAGVDW3S1 (*(volatile uint32_t *)0x4001F11C)// Cache Tag Storage #define FMC_DATAW0S0 (*(volatile uint32_t *)0x4001F200)// Cache Data Storage #define FMC_DATAW0S1 (*(volatile uint32_t *)0x4001F204)// Cache Data Storage #define FMC_DATAW1S0 (*(volatile uint32_t *)0x4001F208)// Cache Data Storage #define FMC_DATAW1S1 (*(volatile uint32_t *)0x4001F20C)// Cache Data Storage #define FMC_DATAW2S0 (*(volatile uint32_t *)0x4001F210)// Cache Data Storage #define FMC_DATAW2S1 (*(volatile uint32_t *)0x4001F214)// Cache Data Storage #define FMC_DATAW3S0 (*(volatile uint32_t *)0x4001F218)// Cache Data Storage #define FMC_DATAW3S1 (*(volatile uint32_t *)0x4001F21C)// Cache Data Storage // Chapter 28: Flash Memory Module (FTFL) #define FTFL_FSTAT (*(volatile uint8_t *)0x40020000) // Flash Status Register #define FTFL_FSTAT_CCIF ((uint8_t)0x80) // Command Complete Interrupt Flag #define FTFL_FSTAT_RDCOLERR ((uint8_t)0x40) // Flash Read Collision Error Flag #define FTFL_FSTAT_ACCERR ((uint8_t)0x20) // Flash Access Error Flag #define FTFL_FSTAT_FPVIOL ((uint8_t)0x10) // Flash Protection Violation Flag #define FTFL_FSTAT_MGSTAT0 ((uint8_t)0x01) // Memory Controller Command Completion Status Flag #define FTFL_FCNFG (*(volatile uint8_t *)0x40020001) // Flash Configuration Register #define FTFL_FCNFG_CCIE ((uint8_t)0x80) // Command Complete Interrupt Enable #define FTFL_FCNFG_RDCOLLIE ((uint8_t)0x40) // Read Collision Error Interrupt Enable #define FTFL_FCNFG_ERSAREQ ((uint8_t)0x20) // Erase All Request #define FTFL_FCNFG_ERSSUSP ((uint8_t)0x10) // Erase Suspend #define FTFL_FCNFG_PFLSH ((uint8_t)0x04) // Flash memory configuration #define FTFL_FCNFG_RAMRDY ((uint8_t)0x02) // RAM Ready #define FTFL_FCNFG_EEERDY ((uint8_t)0x01) // EEPROM Ready #define FTFL_FSEC (*(const uint8_t *)0x40020002) // Flash Security Register #define FTFL_FOPT (*(const uint8_t *)0x40020003) // Flash Option Register #define FTFL_FCCOB3 (*(volatile uint8_t *)0x40020004) // Flash Common Command Object Registers #define FTFL_FCCOB2 (*(volatile uint8_t *)0x40020005) #define FTFL_FCCOB1 (*(volatile uint8_t *)0x40020006) #define FTFL_FCCOB0 (*(volatile uint8_t *)0x40020007) #define FTFL_FCCOB7 (*(volatile uint8_t *)0x40020008) #define FTFL_FCCOB6 (*(volatile uint8_t *)0x40020009) #define FTFL_FCCOB5 (*(volatile uint8_t *)0x4002000A) #define FTFL_FCCOB4 (*(volatile uint8_t *)0x4002000B) #define FTFL_FCCOBB (*(volatile uint8_t *)0x4002000C) #define FTFL_FCCOBA (*(volatile uint8_t *)0x4002000D) #define FTFL_FCCOB9 (*(volatile uint8_t *)0x4002000E) #define FTFL_FCCOB8 (*(volatile uint8_t *)0x4002000F) #define FTFL_FPROT3 (*(volatile uint8_t *)0x40020010) // Program Flash Protection Registers #define FTFL_FPROT2 (*(volatile uint8_t *)0x40020011) // Program Flash Protection Registers #define FTFL_FPROT1 (*(volatile uint8_t *)0x40020012) // Program Flash Protection Registers #define FTFL_FPROT0 (*(volatile uint8_t *)0x40020013) // Program Flash Protection Registers #define FTFL_FEPROT (*(volatile uint8_t *)0x40020016) // EEPROM Protection Register #define FTFL_FDPROT (*(volatile uint8_t *)0x40020017) // Data Flash Protection Register // Chapter 30: Cyclic Redundancy Check (CRC) #define CRC_CRC (*(volatile uint32_t *)0x40032000) // CRC Data register #define CRC_GPOLY (*(volatile uint32_t *)0x40032004) // CRC Polynomial register #define CRC_CTRL (*(volatile uint32_t *)0x40032008) // CRC Control register // Chapter 31: Analog-to-Digital Converter (ADC) #define ADC0_SC1A (*(volatile uint32_t *)0x4003B000) // ADC status and control registers 1 #define ADC0_SC1B (*(volatile uint32_t *)0x4003B004) // ADC status and control registers 1 #define ADC_SC1_COCO ((uint32_t)0x80) // Conversion complete flag #define ADC_SC1_AIEN ((uint32_t)0x40) // Interrupt enable #define ADC_SC1_DIFF ((uint32_t)0x20) // Differential mode enable #define ADC_SC1_ADCH(n) ((uint32_t)((n) & 0x1F)) // Input channel select #define ADC0_CFG1 (*(volatile uint32_t *)0x4003B008) // ADC configuration register 1 #define ADC_CFG1_ADLPC ((uint32_t)0x80) // Low-power configuration #define ADC_CFG1_ADIV(n) ((uint32_t)(((n) & 3) << 5)) // Clock divide select, 0=direct, 1=div2, 2=div4, 3=div8 #define ADC_CFG1_ADLSMP ((uint32_t)0x10) // Sample time configuration, 0=Short, 1=Long #define ADC_CFG1_MODE(n) ((uint32_t)(((n) & 3) << 2)) // Conversion mode, 0=8 bit, 1=12 bit, 2=10 bit, 3=16 bit #define ADC_CFG1_ADICLK(n) ((uint32_t)(((n) & 3) << 0)) // Input clock, 0=bus, 1=bus/2, 2=OSCERCLK, 3=async #define ADC0_CFG2 (*(volatile uint32_t *)0x4003B00C) // Configuration register 2 #define ADC_CFG2_MUXSEL ((uint32_t)0x10) // 0=a channels, 1=b channels #define ADC_CFG2_ADACKEN ((uint32_t)0x08) // async clock enable #define ADC_CFG2_ADHSC ((uint32_t)0x04) // High speed configuration #define ADC_CFG2_ADLSTS(n) ((uint32_t)(((n) & 3) << 0)) // Sample time, 0=24 cycles, 1=12 cycles, 2=6 cycles, 3=2 cycles #define ADC0_RA (*(volatile uint32_t *)0x4003B010) // ADC data result register #define ADC0_RB (*(volatile uint32_t *)0x4003B014) // ADC data result register #define ADC0_CV1 (*(volatile uint32_t *)0x4003B018) // Compare value registers #define ADC0_CV2 (*(volatile uint32_t *)0x4003B01C) // Compare value registers #define ADC0_SC2 (*(volatile uint32_t *)0x4003B020) // Status and control register 2 #define ADC_SC2_ADACT ((uint32_t)0x80) // Conversion active #define ADC_SC2_ADTRG ((uint32_t)0x40) // Conversion trigger select, 0=software, 1=hardware #define ADC_SC2_ACFE ((uint32_t)0x20) // Compare function enable #define ADC_SC2_ACFGT ((uint32_t)0x10) // Compare function greater than enable #define ADC_SC2_ACREN ((uint32_t)0x08) // Compare function range enable #define ADC_SC2_DMAEN ((uint32_t)0x04) // DMA enable #define ADC_SC2_REFSEL(n) ((uint32_t)(((n) & 3) << 0)) // Voltage reference, 0=vcc/external, 1=1.2 volts #define ADC0_SC3 (*(volatile uint32_t *)0x4003B024) // Status and control register 3 #define ADC_SC3_CAL ((uint32_t)0x80) // Calibration, 1=begin, stays set while cal in progress #define ADC_SC3_CALF ((uint32_t)0x40) // Calibration failed flag #define ADC_SC3_ADCO ((uint32_t)0x08) // Continuous conversion enable #define ADC_SC3_AVGE ((uint32_t)0x04) // Hardware average enable #define ADC_SC3_AVGS(n) ((uint32_t)(((n) & 3) << 0)) // avg select, 0=4 samples, 1=8 samples, 2=16 samples, 3=32 samples #define ADC0_OFS (*(volatile uint32_t *)0x4003B028) // ADC offset correction register #define ADC0_PG (*(volatile uint32_t *)0x4003B02C) // ADC plus-side gain register #define ADC0_MG (*(volatile uint32_t *)0x4003B030) // ADC minus-side gain register #define ADC0_CLPD (*(volatile uint32_t *)0x4003B034) // ADC plus-side general calibration value register #define ADC0_CLPS (*(volatile uint32_t *)0x4003B038) // ADC plus-side general calibration value register #define ADC0_CLP4 (*(volatile uint32_t *)0x4003B03C) // ADC plus-side general calibration value register #define ADC0_CLP3 (*(volatile uint32_t *)0x4003B040) // ADC plus-side general calibration value register #define ADC0_CLP2 (*(volatile uint32_t *)0x4003B044) // ADC plus-side general calibration value register #define ADC0_CLP1 (*(volatile uint32_t *)0x4003B048) // ADC plus-side general calibration value register #define ADC0_CLP0 (*(volatile uint32_t *)0x4003B04C) // ADC plus-side general calibration value register #define ADC0_PGA (*(volatile uint32_t *)0x4003B050) // ADC Programmable Gain Amplifier #define ADC_PGA_PGAEN ((uint32_t)0x00800000) // Enable #define ADC_PGA_PGALPB ((uint32_t)0x00100000) // Low-Power Mode Control, 0=low power, 1=normal #define ADC_PGA_PGAG(n) ((uint32_t)(((n) & 15) << 16)) // Gain, 0=1X, 1=2X, 2=4X, 3=8X, 4=16X, 5=32X, 6=64X #define ADC0_CLMD (*(volatile uint32_t *)0x4003B054) // ADC minus-side general calibration value register #define ADC0_CLMS (*(volatile uint32_t *)0x4003B058) // ADC minus-side general calibration value register #define ADC0_CLM4 (*(volatile uint32_t *)0x4003B05C) // ADC minus-side general calibration value register #define ADC0_CLM3 (*(volatile uint32_t *)0x4003B060) // ADC minus-side general calibration value register #define ADC0_CLM2 (*(volatile uint32_t *)0x4003B064) // ADC minus-side general calibration value register #define ADC0_CLM1 (*(volatile uint32_t *)0x4003B068) // ADC minus-side general calibration value register #define ADC0_CLM0 (*(volatile uint32_t *)0x4003B06C) // ADC minus-side general calibration value register #define ADC1_SC1A (*(volatile uint32_t *)0x400BB000) // ADC status and control registers 1 #define ADC1_SC1B (*(volatile uint32_t *)0x400BB004) // ADC status and control registers 1 #define ADC1_CFG1 (*(volatile uint32_t *)0x400BB008) // ADC configuration register 1 #define ADC1_CFG2 (*(volatile uint32_t *)0x400BB00C) // Configuration register 2 #define ADC1_RA (*(volatile uint32_t *)0x400BB010) // ADC data result register #define ADC1_RB (*(volatile uint32_t *)0x400BB014) // ADC data result register #define ADC1_CV1 (*(volatile uint32_t *)0x400BB018) // Compare value registers #define ADC1_CV2 (*(volatile uint32_t *)0x400BB01C) // Compare value registers #define ADC1_SC2 (*(volatile uint32_t *)0x400BB020) // Status and control register 2 #define ADC1_SC3 (*(volatile uint32_t *)0x400BB024) // Status and control register 3 #define ADC1_OFS (*(volatile uint32_t *)0x400BB028) // ADC offset correction register #define ADC1_PG (*(volatile uint32_t *)0x400BB02C) // ADC plus-side gain register #define ADC1_MG (*(volatile uint32_t *)0x400BB030) // ADC minus-side gain register #define ADC1_CLPD (*(volatile uint32_t *)0x400BB034) // ADC plus-side general calibration value register #define ADC1_CLPS (*(volatile uint32_t *)0x400BB038) // ADC plus-side general calibration value register #define ADC1_CLP4 (*(volatile uint32_t *)0x400BB03C) // ADC plus-side general calibration value register #define ADC1_CLP3 (*(volatile uint32_t *)0x400BB040) // ADC plus-side general calibration value register #define ADC1_CLP2 (*(volatile uint32_t *)0x400BB044) // ADC plus-side general calibration value register #define ADC1_CLP1 (*(volatile uint32_t *)0x400BB048) // ADC plus-side general calibration value register #define ADC1_CLP0 (*(volatile uint32_t *)0x400BB04C) // ADC plus-side general calibration value register #define ADC1_PGA (*(volatile uint32_t *)0x400BB050) // ADC Programmable Gain Amplifier #define ADC1_CLMD (*(volatile uint32_t *)0x400BB054) // ADC minus-side general calibration value register #define ADC1_CLMS (*(volatile uint32_t *)0x400BB058) // ADC minus-side general calibration value register #define ADC1_CLM4 (*(volatile uint32_t *)0x400BB05C) // ADC minus-side general calibration value register #define ADC1_CLM3 (*(volatile uint32_t *)0x400BB060) // ADC minus-side general calibration value register #define ADC1_CLM2 (*(volatile uint32_t *)0x400BB064) // ADC minus-side general calibration value register #define ADC1_CLM1 (*(volatile uint32_t *)0x400BB068) // ADC minus-side general calibration value register #define ADC1_CLM0 (*(volatile uint32_t *)0x400BB06C) // ADC minus-side general calibration value register #if defined(KINETISK) #define DAC0_DAT0L (*(volatile uint8_t *)0x400CC000) // DAC Data Low Register #define DAC0_DATH (*(volatile uint8_t *)0x400CC001) // DAC Data High Register #define DAC0_DAT1L (*(volatile uint8_t *)0x400CC002) // DAC Data Low Register #define DAC0_DAT2L (*(volatile uint8_t *)0x400CC004) // DAC Data Low Register #define DAC0_DAT3L (*(volatile uint8_t *)0x400CC006) // DAC Data Low Register #define DAC0_DAT4L (*(volatile uint8_t *)0x400CC008) // DAC Data Low Register #define DAC0_DAT5L (*(volatile uint8_t *)0x400CC00A) // DAC Data Low Register #define DAC0_DAT6L (*(volatile uint8_t *)0x400CC00C) // DAC Data Low Register #define DAC0_DAT7L (*(volatile uint8_t *)0x400CC00E) // DAC Data Low Register #define DAC0_DAT8L (*(volatile uint8_t *)0x400CC010) // DAC Data Low Register #define DAC0_DAT9L (*(volatile uint8_t *)0x400CC012) // DAC Data Low Register #define DAC0_DAT10L (*(volatile uint8_t *)0x400CC014) // DAC Data Low Register #define DAC0_DAT11L (*(volatile uint8_t *)0x400CC016) // DAC Data Low Register #define DAC0_DAT12L (*(volatile uint8_t *)0x400CC018) // DAC Data Low Register #define DAC0_DAT13L (*(volatile uint8_t *)0x400CC01A) // DAC Data Low Register #define DAC0_DAT14L (*(volatile uint8_t *)0x400CC01C) // DAC Data Low Register #define DAC0_DAT15L (*(volatile uint8_t *)0x400CC01E) // DAC Data Low Register #define DAC0_SR (*(volatile uint8_t *)0x400CC020) // DAC Status Register #define DAC0_C0 (*(volatile uint8_t *)0x400CC021) // DAC Control Register #define DAC_C0_DACEN 0x80 // DAC Enable #define DAC_C0_DACRFS 0x40 // DAC Reference Select #define DAC_C0_DACTRGSEL 0x20 // DAC Trigger Select #define DAC_C0_DACSWTRG 0x10 // DAC Software Trigger #define DAC_C0_LPEN 0x08 // DAC Low Power Control #define DAC_C0_DACBWIEN 0x04 // DAC Buffer Watermark Interrupt Enable #define DAC_C0_DACBTIEN 0x02 // DAC Buffer Read Pointer Top Flag Interrupt Enable #define DAC_C0_DACBBIEN 0x01 // DAC Buffer Read Pointer Bottom Flag Interrupt Enable #define DAC0_C1 (*(volatile uint8_t *)0x400CC022) // DAC Control Register 1 #define DAC_C1_DMAEN 0x80 // DMA Enable Select #define DAC_C1_DACBFWM(n) ((((n) & 3) << 3)) // DAC Buffer Watermark Select #define DAC_C1_DACBFMD(n) ((((n) & 3) << 1)) // DAC Buffer Work Mode Select #define DAC_C1_DACBFEN 0x01 // DAC Buffer Enable #define DAC0_C2 (*(volatile uint8_t *)0x400CC023) // DAC Control Register 2 #define DAC_C2_DACBFRP(n) ((((n) & 15) << 4)) // DAC Buffer Read Pointer #define DAC_C2_DACBFUP(n) ((((n) & 15) << 0)) // DAC Buffer Upper Limit #elif defined(KINETISL) #define DAC0_DAT0L (*(volatile uint8_t *)0x4003F000) // Data Low #define DAC0_DAT0H (*(volatile uint8_t *)0x4003F001) // Data High #define DAC0_DAT1L (*(volatile uint8_t *)0x4003F002) // Data Low #define DAC0_DAT1H (*(volatile uint8_t *)0x4003F003) // Data High #define DAC0_SR (*(volatile uint8_t *)0x4003F020) // Status #define DAC0_C0 (*(volatile uint8_t *)0x4003F021) // Control Register #define DAC0_C1 (*(volatile uint8_t *)0x4003F022) // Control Register 1 #define DAC0_C2 (*(volatile uint8_t *)0x4003F023) // Control Register 2 #define DAC_SR_DACBFRPTF ((uint8_t)0x02) // Read Pointer Top Position Flag #define DAC_SR_DACBFRPBF ((uint8_t)0x01) // Read Pointer Bottom Position Flag #define DAC_C0_DACEN ((uint8_t)0x80) // Enable #define DAC_C0_DACRFS ((uint8_t)0x40) // Reference, 0=AREF pin, 1=VCC #define DAC_C0_DACTRGSEL ((uint8_t)0x20) // Trigger Select #define DAC_C0_DACSWTRG ((uint8_t)0x10) // Software Trigger #define DAC_C0_LPEN ((uint8_t)0x08) // Low Power Control #define DAC_C0_DACBTIEN ((uint8_t)0x02) // Top Flag Interrupt Enable #define DAC_C0_DACBBIEN ((uint8_t)0x01) // Bottom Flag Interrupt Enable #define DAC_C1_DMAEN ((uint8_t)0x80) // DMA Enable #define DAC_C1_DACBFMD ((uint8_t)0x04) // Work Mode Select #define DAC_C1_DACBFEN ((uint8_t)0x01) // Buffer Enable #define DAC_C2_DACBFRP ((uint8_t)0x10) // Buffer Read Pointer #define DAC_C2_DACBFUP ((uint8_t)0x01) // Buffer Upper Limit #endif //#define MCG_C2_RANGE0(n) (uint8_t)(((n) & 0x03) << 4) // Frequency Range Select, Selects the frequency range for the crystal oscillator //#define MCG_C2_LOCRE0 (uint8_t)0x80 // Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0 // Chapter 32: Comparator (CMP) #define CMP0_CR0 (*(volatile uint8_t *)0x40073000) // CMP Control Register 0 #define CMP0_CR1 (*(volatile uint8_t *)0x40073001) // CMP Control Register 1 #define CMP0_FPR (*(volatile uint8_t *)0x40073002) // CMP Filter Period Register #define CMP0_SCR (*(volatile uint8_t *)0x40073003) // CMP Status and Control Register #define CMP0_DACCR (*(volatile uint8_t *)0x40073004) // DAC Control Register #define CMP0_MUXCR (*(volatile uint8_t *)0x40073005) // MUX Control Register #define CMP1_CR0 (*(volatile uint8_t *)0x40073008) // CMP Control Register 0 #define CMP1_CR1 (*(volatile uint8_t *)0x40073009) // CMP Control Register 1 #define CMP1_FPR (*(volatile uint8_t *)0x4007300A) // CMP Filter Period Register #define CMP1_SCR (*(volatile uint8_t *)0x4007300B) // CMP Status and Control Register #define CMP1_DACCR (*(volatile uint8_t *)0x4007300C) // DAC Control Register #define CMP1_MUXCR (*(volatile uint8_t *)0x4007300D) // MUX Control Register #define CMP2_CR0 (*(volatile uint8_t *)0x40073010) // CMP Control Register 0 #define CMP2_CR1 (*(volatile uint8_t *)0x40073011) // CMP Control Register 1 #define CMP2_FPR (*(volatile uint8_t *)0x40073012) // CMP Filter Period Register #define CMP2_SCR (*(volatile uint8_t *)0x40073013) // CMP Status and Control Register #define CMP2_DACCR (*(volatile uint8_t *)0x40073014) // DAC Control Register #define CMP2_MUXCR (*(volatile uint8_t *)0x40073015) // MUX Control Register // Chapter 33: Voltage Reference (VREFV1) #define VREF_TRM (*(volatile uint8_t *)0x40074000) // VREF Trim Register #define VREF_TRM_CHOPEN ((uint8_t)0x40) // Chop oscillator enable #define VREF_TRM_TRIM(n) ((n) & 0x3F) // Trim bits #define VREF_SC (*(volatile uint8_t *)0x40074001) // VREF Status and Control Register #define VREF_SC_VREFEN ((uint8_t)0x80) // Internal Voltage Reference enable #define VREF_SC_REGEN ((uint8_t)0x40) // Regulator enable #define VREF_SC_ICOMPEN ((uint8_t)0x20) // Second order curvature compensation enable #define VREF_SC_VREFST ((uint8_t)0x04) // Internal Voltage Reference stable flag #define VREF_SC_MODE_LV(n) (uint8_t)(((n) & 3) << 0) // Buffer Mode selection: 0=Bandgap on only // 1=High power buffer mode, // 2=Low-power buffer mode // Chapter 34: Programmable Delay Block (PDB) #define PDB0_SC (*(volatile uint32_t *)0x40036000) // Status and Control Register #define PDB_SC_LDMOD(n) (((n) & 3) << 18) // Load Mode Select #define PDB_SC_PDBEIE 0x00020000 // Sequence Error Interrupt Enable #define PDB_SC_SWTRIG 0x00010000 // Software Trigger #define PDB_SC_DMAEN 0x00008000 // DMA Enable #define PDB_SC_PRESCALER(n) (((n) & 7) << 12) // Prescaler Divider Select #define PDB_SC_TRGSEL(n) (((n) & 15) << 8) // Trigger Input Source Select #define PDB_SC_PDBEN 0x00000080 // PDB Enable #define PDB_SC_PDBIF 0x00000040 // PDB Interrupt Flag #define PDB_SC_PDBIE 0x00000020 // PDB Interrupt Enable. #define PDB_SC_MULT(n) (((n) & 3) << 2) // Multiplication Factor #define PDB_SC_CONT 0x00000002 // Continuous Mode Enable #define PDB_SC_LDOK 0x00000001 // Load OK #define PDB0_MOD (*(volatile uint32_t *)0x40036004) // Modulus Register #define PDB0_CNT (*(volatile uint32_t *)0x40036008) // Counter Register #define PDB0_IDLY (*(volatile uint32_t *)0x4003600C) // Interrupt Delay Register #define PDB0_CH0C1 (*(volatile uint32_t *)0x40036010) // Channel n Control Register 1 #define PDB0_CH0S (*(volatile uint32_t *)0x40036014) // Channel n Status Register #define PDB0_CH0DLY0 (*(volatile uint32_t *)0x40036018) // Channel n Delay 0 Register #define PDB0_CH0DLY1 (*(volatile uint32_t *)0x4003601C) // Channel n Delay 1 Register #define PDB0_POEN (*(volatile uint32_t *)0x40036190) // Pulse-Out n Enable Register #define PDB0_PO0DLY (*(volatile uint32_t *)0x40036194) // Pulse-Out n Delay Register #define PDB0_PO1DLY (*(volatile uint32_t *)0x40036198) // Pulse-Out n Delay Register // Chapter 35: FlexTimer Module (FTM) #define FTM0_SC (*(volatile uint32_t *)0x40038000) // Status And Control #define FTM_SC_TOF 0x80 // Timer Overflow Flag #define FTM_SC_TOIE 0x40 // Timer Overflow Interrupt Enable #define FTM_SC_CPWMS 0x20 // Center-Aligned PWM Select #define FTM_SC_CLKS(n) (((n) & 3) << 3) // Clock Source Selection #define FTM_SC_CLKS_MASK 0x18 #define FTM_SC_PS(n) (((n) & 7) << 0) // Prescale Factor Selection #define FTM_SC_PS_MASK 0x07 #define FTM0_CNT (*(volatile uint32_t *)0x40038004) // Counter #define FTM0_MOD (*(volatile uint32_t *)0x40038008) // Modulo #define FTM0_C0SC (*(volatile uint32_t *)0x4003800C) // Channel 0 Status And Control #define FTM_CSC_CHF 0x80 // Channel Flag #define FTM_CSC_CHIE 0x40 // Channel Interrupt Enable #define FTM_CSC_MSB 0x20 // Channel Mode Select #define FTM_CSC_MSA 0x10 // Channel Mode Select #define FTM_CSC_ELSB 0x08 // Edge or Level Select #define FTM_CSC_ELSA 0x04 // Edge or Level Select #define FTM_CSC_DMA 0x01 // DMA Enable #define FTM0_C0V (*(volatile uint32_t *)0x40038010) // Channel 0 Value #define FTM0_C1SC (*(volatile uint32_t *)0x40038014) // Channel 1 Status And Control #define FTM0_C1V (*(volatile uint32_t *)0x40038018) // Channel 1 Value #define FTM0_C2SC (*(volatile uint32_t *)0x4003801C) // Channel 2 Status And Control #define FTM0_C2V (*(volatile uint32_t *)0x40038020) // Channel 2 Value #define FTM0_C3SC (*(volatile uint32_t *)0x40038024) // Channel 3 Status And Control #define FTM0_C3V (*(volatile uint32_t *)0x40038028) // Channel 3 Value #define FTM0_C4SC (*(volatile uint32_t *)0x4003802C) // Channel 4 Status And Control #define FTM0_C4V (*(volatile uint32_t *)0x40038030) // Channel 4 Value #define FTM0_C5SC (*(volatile uint32_t *)0x40038034) // Channel 5 Status And Control #define FTM0_C5V (*(volatile uint32_t *)0x40038038) // Channel 5 Value #define FTM0_C6SC (*(volatile uint32_t *)0x4003803C) // Channel 6 Status And Control #define FTM0_C6V (*(volatile uint32_t *)0x40038040) // Channel 6 Value #define FTM0_C7SC (*(volatile uint32_t *)0x40038044) // Channel 7 Status And Control #define FTM0_C7V (*(volatile uint32_t *)0x40038048) // Channel 7 Value #define FTM0_CNTIN (*(volatile uint32_t *)0x4003804C) // Counter Initial Value #define FTM0_STATUS (*(volatile uint32_t *)0x40038050) // Capture And Compare Status #define FTM_STATUS_CH7F 0x80 // #define FTM_STATUS_CH6F 0x40 // #define FTM_STATUS_CH5F 0x20 // #define FTM_STATUS_CH4F 0x10 // #define FTM_STATUS_CH3F 0x08 // #define FTM_STATUS_CH2F 0x04 // #define FTM_STATUS_CH1F 0x02 // #define FTM_STATUS_CH0F 0x01 // #define FTM0_MODE (*(volatile uint32_t *)0x40038054) // Features Mode Selection #define FTM_MODE_FAULTIE 0x80 // Fault Interrupt Enable #define FTM_MODE_FAULTM(n) (((n) & 3) << 5) // Fault Control Mode #define FTM_MODE_FAULTM_MASK 0x60 #define FTM_MODE_CAPTEST 0x10 // Capture Test Mode Enable #define FTM_MODE_PWMSYNC 0x08 // PWM Synchronization Mode #define FTM_MODE_WPDIS 0x04 // Write Protection Disable #define FTM_MODE_INIT 0x02 // Initialize The Channels Output #define FTM_MODE_FTMEN 0x01 // FTM Enable #define FTM0_SYNC (*(volatile uint32_t *)0x40038058) // Synchronization #define FTM_SYNC_SWSYNC 0x80 // #define FTM_SYNC_TRIG2 0x40 // #define FTM_SYNC_TRIG1 0x20 // #define FTM_SYNC_TRIG0 0x10 // #define FTM_SYNC_SYNCHOM 0x08 // #define FTM_SYNC_REINIT 0x04 // #define FTM_SYNC_CNTMAX 0x02 // #define FTM_SYNC_CNTMIN 0x01 // #define FTM0_OUTINIT (*(volatile uint32_t *)0x4003805C) // Initial State For Channels Output #define FTM_OUTINIT_CH7OI 0x80 // #define FTM_OUTINIT_CH6OI 0x40 // #define FTM_OUTINIT_CH5OI 0x20 // #define FTM_OUTINIT_CH4OI 0x10 // #define FTM_OUTINIT_CH3OI 0x08 // #define FTM_OUTINIT_CH2OI 0x04 // #define FTM_OUTINIT_CH1OI 0x02 // #define FTM_OUTINIT_CH0OI 0x01 // #define FTM0_OUTMASK (*(volatile uint32_t *)0x40038060) // Output Mask #define FTM_OUTMASK_CH7OM 0x80 // #define FTM_OUTMASK_CH6OM 0x40 // #define FTM_OUTMASK_CH5OM 0x20 // #define FTM_OUTMASK_CH4OM 0x10 // #define FTM_OUTMASK_CH3OM 0x08 // #define FTM_OUTMASK_CH2OM 0x04 // #define FTM_OUTMASK_CH1OM 0x02 // #define FTM_OUTMASK_CH0OM 0x01 // #define FTM0_COMBINE (*(volatile uint32_t *)0x40038064) // Function For Linked Channels #define FTM_COMBINE_FAULTEN3 0x40000000 // Enable the fault control, ch #6 & #7 #define FTM_COMBINE_SYNCEN3 0x20000000 // Enable PWM sync of C6V & C7V #define FTM_COMBINE_DTEN3 0x10000000 // Enable deadtime insertion, ch #6 & #7 #define FTM_COMBINE_DECAP3 0x08000000 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN3 0x04000000 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP3 0x02000000 // Complement Of Channel #6 & #7 #define FTM_COMBINE_COMBINE3 0x01000000 // Combine Channels #6 & #7 #define FTM_COMBINE_FAULTEN2 0x00400000 // Enable the fault control, ch #4 & #5 #define FTM_COMBINE_SYNCEN2 0x00200000 // Enable PWM sync of C4V & C5V #define FTM_COMBINE_DTEN2 0x00100000 // Enable deadtime insertion, ch #4 & #5 #define FTM_COMBINE_DECAP2 0x00080000 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN2 0x00040000 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP2 0x00020000 // Complement Of Channel #4 & #5 #define FTM_COMBINE_COMBINE2 0x00010000 // Combine Channels #4 & #5 #define FTM_COMBINE_FAULTEN1 0x00004000 // Enable the fault control, ch #2 & #3 #define FTM_COMBINE_SYNCEN1 0x00002000 // Enable PWM sync of C2V & C3V #define FTM_COMBINE_DTEN1 0x00001000 // Enable deadtime insertion, ch #2 & #3 #define FTM_COMBINE_DECAP1 0x00000800 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN1 0x00000400 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP1 0x00000200 // Complement Of Channel #2 & #3 #define FTM_COMBINE_COMBINE1 0x00000100 // Combine Channels #2 & #3 #define FTM_COMBINE_FAULTEN0 0x00000040 // Enable the fault control, ch #0 & #1 #define FTM_COMBINE_SYNCEN0 0x00000020 // Enable PWM sync of C0V & C1V #define FTM_COMBINE_DTEN0 0x00000010 // Enable deadtime insertion, ch #0 & #1 #define FTM_COMBINE_DECAP0 0x00000008 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN0 0x00000004 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP0 0x00000002 // Complement Of Channel #0 & #1 #define FTM_COMBINE_COMBINE0 0x00000001 // Combine Channels #0 & #1 #define FTM0_DEADTIME (*(volatile uint32_t *)0x40038068) // Deadtime Insertion Control #define FTM_DEADTIME_DTPS(n) (((n) & 3) << 6) // Prescaler Value, 0=1x, 2=4x, 3=16x #define FTM_DEADTIME_DTPS_MASK 0xC0 #define FTM_DEADTIME_DTVAL(n) (((n) & 63) << 0) // Deadtime Value #define FTM_DEADTIME_DTVAL_MASK 0x3F #define FTM0_EXTTRIG (*(volatile uint32_t *)0x4003806C) // FTM External Trigger #define FTM_EXTTRIG_TRIGF 0x80 // Channel Trigger Flag #define FTM_EXTTRIG_INITTRIGEN 0x40 // Initialization Trigger Enable #define FTM_EXTTRIG_CH1TRIG 0x20 // Channel 1 Trigger Enable #define FTM_EXTTRIG_CH0TRIG 0x10 // Channel 0 Trigger Enable #define FTM_EXTTRIG_CH5TRIG 0x08 // Channel 5 Trigger Enable #define FTM_EXTTRIG_CH4TRIG 0x04 // Channel 4 Trigger Enable #define FTM_EXTTRIG_CH3TRIG 0x02 // Channel 3 Trigger Enable #define FTM_EXTTRIG_CH2TRIG 0x01 // Channel 2 Trigger Enable #define FTM0_POL (*(volatile uint32_t *)0x40038070) // Channels Polarity #define FTM_POL_POL7 0x80 // Channel 7 Polarity, 0=active high, 1=active low #define FTM_POL_POL6 0x40 // Channel 6 Polarity, 0=active high, 1=active low #define FTM_POL_POL5 0x20 // Channel 5 Polarity, 0=active high, 1=active low #define FTM_POL_POL4 0x10 // Channel 4 Polarity, 0=active high, 1=active low #define FTM_POL_POL3 0x08 // Channel 3 Polarity, 0=active high, 1=active low #define FTM_POL_POL2 0x04 // Channel 2 Polarity, 0=active high, 1=active low #define FTM_POL_POL1 0x02 // Channel 1 Polarity, 0=active high, 1=active low #define FTM_POL_POL0 0x01 // Channel 0 Polarity, 0=active high, 1=active low #define FTM0_FMS (*(volatile uint32_t *)0x40038074) // Fault Mode Status #define FTM_FMS_FAULTF 0x80 // Fault Detection Flag #define FTM_FMS_WPEN 0x40 // Write Protection Enable #define FTM_FMS_FAULTIN 0x20 // Fault Inputs #define FTM_FMS_FAULTF3 0x08 // Fault Detection Flag 3 #define FTM_FMS_FAULTF2 0x04 // Fault Detection Flag 2 #define FTM_FMS_FAULTF1 0x02 // Fault Detection Flag 1 #define FTM_FMS_FAULTF0 0x01 // Fault Detection Flag 0 #define FTM0_FILTER (*(volatile uint32_t *)0x40038078) // Input Capture Filter Control #define FTM_FILTER_CH3FVAL(n) (((n) & 15) << 12) // Channel 3 Input Filter #define FTM_FILTER_CH2FVAL(n) (((n) & 15) << 8) // Channel 2 Input Filter #define FTM_FILTER_CH1FVAL(n) (((n) & 15) << 4) // Channel 1 Input Filter #define FTM_FILTER_CH0FVAL(n) (((n) & 15) << 0) // Channel 0 Input Filter #define FTM_FILTER_CH3FVAL_MASK 0xF000 #define FTM_FILTER_CH2FVAL_MASK 0x0F00 #define FTM_FILTER_CH1FVAL_MASK 0x00F0 #define FTM_FILTER_CH0FVAL_MASK 0x000F #define FTM0_FLTCTRL (*(volatile uint32_t *)0x4003807C) // Fault Control #define FTM_FLTCTRL_FFVAL(n) (((n) & 15) << 8) // Fault Input Filter Value, 0=disable #define FTM_FLTCTRL_FFVAL_MASK 0xF00 #define FTM_FLTCTRL_FFLTR3EN 0x80 // Fault Input 3 Filter Enable #define FTM_FLTCTRL_FFLTR2EN 0x40 // Fault Input 2 Filter Enable #define FTM_FLTCTRL_FFLTR1EN 0x20 // Fault Input 1 Filter Enable #define FTM_FLTCTRL_FFLTR0EN 0x10 // Fault Input 0 Filter Enable #define FTM_FLTCTRL_FAULT3EN 0x08 // Fault Input 3 Enable #define FTM_FLTCTRL_FAULT2EN 0x04 // Fault Input 2 Enable #define FTM_FLTCTRL_FAULT1EN 0x02 // Fault Input 1 Enable #define FTM_FLTCTRL_FAULT0EN 0x01 // Fault Input 0 Enable #define FTM0_QDCTRL (*(volatile uint32_t *)0x40038080) // Quadrature Decoder Control And Status #define FTM_QDCTRL_PHAFLTREN 0x80 // Phase A Input Filter Enable #define FTM_QDCTRL_PHBFLTREN 0x40 // Phase B Input Filter Enable #define FTM_QDCTRL_PHAPOL 0x20 // Phase A Input Polarity #define FTM_QDCTRL_PHBPOL 0x10 // Phase B Input Polarity #define FTM_QDCTRL_QUADMODE 0x08 // Quadrature Decoder Mode #define FTM_QDCTRL_QUADIR 0x04 // FTM Counter Direction In Quadrature Decoder Mode #define FTM_QDCTRL_TOFDIR 0x02 // Timer Overflow Direction In Quadrature Decoder Mode #define FTM_QDCTRL_QUADEN 0x01 // Quadrature Decoder Mode Enable #define FTM0_CONF (*(volatile uint32_t *)0x40038084) // Configuration #define FTM_CONF_GTBEOUT 0x400 // Global Time Base Output #define FTM_CONF_GTBEEN 0x200 // Global Time Base Enable #define FTM_CONF_BDMMODE (((n) & 3) << 6) // Behavior when in debug mode #define FTM_CONF_NUMTOF (((n) & 31) << 0) // ratio of counter overflows to TOF bit set #define FTM0_FLTPOL (*(volatile uint32_t *)0x40038088) // FTM Fault Input Polarity #define FTM_FLTPOL_FLT3POL 0x08 // Fault Input 3 Polarity #define FTM_FLTPOL_FLT2POL 0x04 // Fault Input 2 Polarity #define FTM_FLTPOL_FLT1POL 0x02 // Fault Input 1 Polarity #define FTM_FLTPOL_FLT0POL 0x01 // Fault Input 0 Polarity #define FTM0_SYNCONF (*(volatile uint32_t *)0x4003808C) // Synchronization Configuration #define FTM_SYNCONF_HWSOC 0x100000 // Software output control synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWINVC 0x080000 // Inverting control synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWOM 0x040000 // Output mask synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWWRBUF 0x020000 // MOD, CNTIN, and CV registers synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWRSTCNT 0x010000 // FTM counter synchronization is activated by a hardware trigger. #define FTM_SYNCONF_SWSOC 0x001000 // Software output control synchronization is activated by the software trigger. #define FTM_SYNCONF_SWINVC 0x000800 // Inverting control synchronization is activated by the software trigger. #define FTM_SYNCONF_SWOM 0x000400 // Output mask synchronization is activated by the software trigger. #define FTM_SYNCONF_SWWRBUF 0x000200 // MOD, CNTIN, and CV registers synchronization is activated by the software trigger. #define FTM_SYNCONF_SWRSTCNT 0x000100 // FTM counter synchronization is activated by the software trigger. #define FTM_SYNCONF_SYNCMODE 0x000080 // Synchronization Mode, 0=Legacy, 1=Enhanced PWM #define FTM_SYNCONF_SWOC 0x000020 // SWOCTRL Register Synchronization #define FTM_SYNCONF_INVC 0x000010 // INVCTRL Register Synchronization #define FTM_SYNCONF_CNTINC 0x000004 // CNTIN Register Synchronization #define FTM_SYNCONF_HWTRIGMODE 0x000001 // Hardware Trigger Mode #define FTM0_INVCTRL (*(volatile uint32_t *)0x40038090) // FTM Inverting Control #define FTM_INVCTRL_INV3EN 0x08 // Pair Channels 3 Inverting Enable #define FTM_INVCTRL_INV2EN 0x04 // Pair Channels 2 Inverting Enable #define FTM_INVCTRL_INV1EN 0x02 // Pair Channels 1 Inverting Enable #define FTM_INVCTRL_INV0EN 0x01 // Pair Channels 0 Inverting Enable #define FTM0_SWOCTRL (*(volatile uint32_t *)0x40038094) // FTM Software Output Control #define FTM_SWOCTRL_CH7OCV 0x8000 // Channel 7 Software Output Control Value #define FTM_SWOCTRL_CH6OCV 0x4000 // Channel 6 Software Output Control Value #define FTM_SWOCTRL_CH5OCV 0x2000 // Channel 5 Software Output Control Value #define FTM_SWOCTRL_CH4OCV 0x1000 // Channel 4 Software Output Control Value #define FTM_SWOCTRL_CH3OCV 0x0800 // Channel 3 Software Output Control Value #define FTM_SWOCTRL_CH2OCV 0x0400 // Channel 2 Software Output Control Value #define FTM_SWOCTRL_CH1OCV 0x0200 // Channel 1 Software Output Control Value #define FTM_SWOCTRL_CH0OCV 0x0100 // Channel 0 Software Output Control Value #define FTM_SWOCTRL_CH7OC 0x0080 // Channel 7 Software Output Control Enable #define FTM_SWOCTRL_CH6OC 0x0040 // Channel 6 Software Output Control Enable #define FTM_SWOCTRL_CH5OC 0x0020 // Channel 5 Software Output Control Enable #define FTM_SWOCTRL_CH4OC 0x0010 // Channel 4 Software Output Control Enable #define FTM_SWOCTRL_CH3OC 0x0008 // Channel 3 Software Output Control Enable #define FTM_SWOCTRL_CH2OC 0x0004 // Channel 2 Software Output Control Enable #define FTM_SWOCTRL_CH1OC 0x0002 // Channel 1 Software Output Control Enable #define FTM_SWOCTRL_CH0OC 0x0001 // Channel 0 Software Output Control Enable #define FTM0_PWMLOAD (*(volatile uint32_t *)0x40038098) // FTM PWM Load #define FTM_PWMLOAD_LDOK 0x200 // Enables the loading of the MOD, CNTIN, and CV registers with the values of their write buffers #define FTM_PWMLOAD_CH7SEL 0x80 // Channel 7 Select #define FTM_PWMLOAD_CH6SEL 0x40 // Channel 6 Select #define FTM_PWMLOAD_CH5SEL 0x20 // Channel 5 Select #define FTM_PWMLOAD_CH4SEL 0x10 // Channel 4 Select #define FTM_PWMLOAD_CH3SEL 0x08 // Channel 4 Select #define FTM_PWMLOAD_CH2SEL 0x04 // Channel 3 Select #define FTM_PWMLOAD_CH1SEL 0x02 // Channel 2 Select #define FTM_PWMLOAD_CH0SEL 0x01 // Channel 1 Select #define FTM1_SC (*(volatile uint32_t *)0x40039000) // Status And Control #define FTM1_CNT (*(volatile uint32_t *)0x40039004) // Counter #define FTM1_MOD (*(volatile uint32_t *)0x40039008) // Modulo #define FTM1_C0SC (*(volatile uint32_t *)0x4003900C) // Channel 0 Status And Control #define FTM1_C0V (*(volatile uint32_t *)0x40039010) // Channel 0 Value #define FTM1_C1SC (*(volatile uint32_t *)0x40039014) // Channel 1 Status And Control #define FTM1_C1V (*(volatile uint32_t *)0x40039018) // Channel 1 Value #define FTM1_CNTIN (*(volatile uint32_t *)0x4003904C) // Counter Initial Value #define FTM1_STATUS (*(volatile uint32_t *)0x40039050) // Capture And Compare Status #define FTM1_MODE (*(volatile uint32_t *)0x40039054) // Features Mode Selection #define FTM1_SYNC (*(volatile uint32_t *)0x40039058) // Synchronization #define FTM1_OUTINIT (*(volatile uint32_t *)0x4003905C) // Initial State For Channels Output #define FTM1_OUTMASK (*(volatile uint32_t *)0x40039060) // Output Mask #define FTM1_COMBINE (*(volatile uint32_t *)0x40039064) // Function For Linked Channels #define FTM1_DEADTIME (*(volatile uint32_t *)0x40039068) // Deadtime Insertion Control #define FTM1_EXTTRIG (*(volatile uint32_t *)0x4003906C) // FTM External Trigger #define FTM1_POL (*(volatile uint32_t *)0x40039070) // Channels Polarity #define FTM1_FMS (*(volatile uint32_t *)0x40039074) // Fault Mode Status #define FTM1_FILTER (*(volatile uint32_t *)0x40039078) // Input Capture Filter Control #define FTM1_FLTCTRL (*(volatile uint32_t *)0x4003907C) // Fault Control #define FTM1_QDCTRL (*(volatile uint32_t *)0x40039080) // Quadrature Decoder Control And Status #define FTM1_CONF (*(volatile uint32_t *)0x40039084) // Configuration #define FTM1_FLTPOL (*(volatile uint32_t *)0x40039088) // FTM Fault Input Polarity #define FTM1_SYNCONF (*(volatile uint32_t *)0x4003908C) // Synchronization Configuration #define FTM1_INVCTRL (*(volatile uint32_t *)0x40039090) // FTM Inverting Control #define FTM1_SWOCTRL (*(volatile uint32_t *)0x40039094) // FTM Software Output Control #define FTM1_PWMLOAD (*(volatile uint32_t *)0x40039098) // FTM PWM Load #if defined(KINETISK) #define FTM2_SC (*(volatile uint32_t *)0x400B8000) // Status And Control #define FTM2_CNT (*(volatile uint32_t *)0x400B8004) // Counter #define FTM2_MOD (*(volatile uint32_t *)0x400B8008) // Modulo #define FTM2_C0SC (*(volatile uint32_t *)0x400B800C) // Channel 0 Status And Control #define FTM2_C0V (*(volatile uint32_t *)0x400B8010) // Channel 0 Value #define FTM2_C1SC (*(volatile uint32_t *)0x400B8014) // Channel 1 Status And Control #define FTM2_C1V (*(volatile uint32_t *)0x400B8018) // Channel 1 Value #define FTM2_CNTIN (*(volatile uint32_t *)0x400B804C) // Counter Initial Value #define FTM2_STATUS (*(volatile uint32_t *)0x400B8050) // Capture And Compare Status #define FTM2_MODE (*(volatile uint32_t *)0x400B8054) // Features Mode Selection #define FTM2_SYNC (*(volatile uint32_t *)0x400B8058) // Synchronization #define FTM2_OUTINIT (*(volatile uint32_t *)0x400B805C) // Initial State For Channels Output #define FTM2_OUTMASK (*(volatile uint32_t *)0x400B8060) // Output Mask #define FTM2_COMBINE (*(volatile uint32_t *)0x400B8064) // Function For Linked Channels #define FTM2_DEADTIME (*(volatile uint32_t *)0x400B8068) // Deadtime Insertion Control #define FTM2_EXTTRIG (*(volatile uint32_t *)0x400B806C) // FTM External Trigger #define FTM2_POL (*(volatile uint32_t *)0x400B8070) // Channels Polarity #define FTM2_FMS (*(volatile uint32_t *)0x400B8074) // Fault Mode Status #define FTM2_FILTER (*(volatile uint32_t *)0x400B8078) // Input Capture Filter Control #define FTM2_FLTCTRL (*(volatile uint32_t *)0x400B807C) // Fault Control #define FTM2_QDCTRL (*(volatile uint32_t *)0x400B8080) // Quadrature Decoder Control And Status #define FTM2_CONF (*(volatile uint32_t *)0x400B8084) // Configuration #define FTM2_FLTPOL (*(volatile uint32_t *)0x400B8088) // FTM Fault Input Polarity #define FTM2_SYNCONF (*(volatile uint32_t *)0x400B808C) // Synchronization Configuration #define FTM2_INVCTRL (*(volatile uint32_t *)0x400B8090) // FTM Inverting Control #define FTM2_SWOCTRL (*(volatile uint32_t *)0x400B8094) // FTM Software Output Control #define FTM2_PWMLOAD (*(volatile uint32_t *)0x400B8098) // FTM PWM Load #elif defined(KINETISL) #define FTM2_SC (*(volatile uint32_t *)0x4003A000) // Status And Control #define FTM2_CNT (*(volatile uint32_t *)0x4003A004) // Counter #define FTM2_MOD (*(volatile uint32_t *)0x4003A008) // Modulo #define FTM2_C0SC (*(volatile uint32_t *)0x4003A00C) // Channel 0 Status And Control #define FTM2_C0V (*(volatile uint32_t *)0x4003A010) // Channel 0 Value #define FTM2_C1SC (*(volatile uint32_t *)0x4003A014) // Channel 1 Status And Control #define FTM2_C1V (*(volatile uint32_t *)0x4003A018) // Channel 1 Value #define FTM2_STATUS (*(volatile uint32_t *)0x4003A050) // Capture And Compare Status #define FTM2_CONF (*(volatile uint32_t *)0x4003A084) // Configuration #endif // Chapter 36 (3.1)/Chapter 32 (LC): Periodic Interrupt Timer (PIT) #define PIT_MCR (*(volatile uint32_t *)0x40037000) // PIT Module Control Register #define PIT_MCR_MDIS (1<<1) // Module disable #define PIT_MCR_FRZ (1<<0) // Freeze #if defined(KINETISL) #define PIT_LTMR64H (*(volatile uint32_t *)0x400370E0) // PIT Upper Lifetime Timer Register #define PIT_LTMR64L (*(volatile uint32_t *)0x400370E4) // PIT Lower Lifetime Timer Register #endif // defined(KINETISL) #define PIT_LDVAL0 (*(volatile uint32_t *)0x40037100) // Timer Load Value Register #define PIT_CVAL0 (*(volatile uint32_t *)0x40037104) // Current Timer Value Register #define PIT_TCTRL0 (*(volatile uint32_t *)0x40037108) // Timer Control Register #define PIT_TCTRL_CHN (1<<2) // Chain Mode #define PIT_TCTRL_TIE (1<<1) // Timer Interrupt Enable #define PIT_TCTRL_TEN (1<<0) // Timer Enable #define PIT_TFLG0 (*(volatile uint32_t *)0x4003710C) // Timer Flag Register #define PIT_TFLG_TIF (1<<0) // Timer Interrupt Flag (write 1 to clear) #define PIT_LDVAL1 (*(volatile uint32_t *)0x40037110) // Timer Load Value Register #define PIT_CVAL1 (*(volatile uint32_t *)0x40037114) // Current Timer Value Register #define PIT_TCTRL1 (*(volatile uint32_t *)0x40037118) // Timer Control Register #define PIT_TFLG1 (*(volatile uint32_t *)0x4003711C) // Timer Flag Register #if defined(KINETISK) // the 3.1 has 4 PITs, LC has only 2 #define PIT_LDVAL2 (*(volatile uint32_t *)0x40037120) // Timer Load Value Register #define PIT_CVAL2 (*(volatile uint32_t *)0x40037124) // Current Timer Value Register #define PIT_TCTRL2 (*(volatile uint32_t *)0x40037128) // Timer Control Register #define PIT_TFLG2 (*(volatile uint32_t *)0x4003712C) // Timer Flag Register #define PIT_LDVAL3 (*(volatile uint32_t *)0x40037130) // Timer Load Value Register #define PIT_CVAL3 (*(volatile uint32_t *)0x40037134) // Current Timer Value Register #define PIT_TCTRL3 (*(volatile uint32_t *)0x40037138) // Timer Control Register #define PIT_TFLG3 (*(volatile uint32_t *)0x4003713C) // Timer Flag Register #endif // defined(KINETISK) // Chapter 37: Low-Power Timer (LPTMR) #define LPTMR0_CSR (*(volatile uint32_t *)0x40040000) // Low Power Timer Control Status Register #define LPTMR_CSR_TCF 0x80 // Compare Flag #define LPTMR_CSR_TIE 0x40 // Interrupt Enable #define LPTMR_CSR_TPS(n) (((n) & 3) << 4) // Pin: 0=CMP0, 1=xtal, 2=pin13 #define LPTMR_CSR_TPP 0x08 // Pin Polarity #define LPTMR_CSR_TFC 0x04 // Free-Running Counter #define LPTMR_CSR_TMS 0x02 // Mode Select, 0=timer, 1=counter #define LPTMR_CSR_TEN 0x01 // Enable #define LPTMR0_PSR (*(volatile uint32_t *)0x40040004) // Low Power Timer Prescale Register #define LPTMR_PSR_PRESCALE(n) (((n) & 15) << 3) // Prescaler value #define LPTMR_PSR_PBYP 0x04 // Prescaler bypass #define LPTMR_PSR_PCS(n) (((n) & 3) << 0) // Clock: 0=MCGIRCLK, 1=LPO(1kHz), 2=ERCLK32K, 3=OSCERCLK #define LPTMR0_CMR (*(volatile uint32_t *)0x40040008) // Low Power Timer Compare Register #define LPTMR0_CNR (*(volatile uint32_t *)0x4004000C) // Low Power Timer Counter Register // Chapter 38: Carrier Modulator Transmitter (CMT) #define CMT_CGH1 (*(volatile uint8_t *)0x40062000) // CMT Carrier Generator High Data Register 1 #define CMT_CGL1 (*(volatile uint8_t *)0x40062001) // CMT Carrier Generator Low Data Register 1 #define CMT_CGH2 (*(volatile uint8_t *)0x40062002) // CMT Carrier Generator High Data Register 2 #define CMT_CGL2 (*(volatile uint8_t *)0x40062003) // CMT Carrier Generator Low Data Register 2 #define CMT_OC (*(volatile uint8_t *)0x40062004) // CMT Output Control Register #define CMT_MSC (*(volatile uint8_t *)0x40062005) // CMT Modulator Status and Control Register #define CMT_CMD1 (*(volatile uint8_t *)0x40062006) // CMT Modulator Data Register Mark High #define CMT_CMD2 (*(volatile uint8_t *)0x40062007) // CMT Modulator Data Register Mark Low #define CMT_CMD3 (*(volatile uint8_t *)0x40062008) // CMT Modulator Data Register Space High #define CMT_CMD4 (*(volatile uint8_t *)0x40062009) // CMT Modulator Data Register Space Low #define CMT_PPS (*(volatile uint8_t *)0x4006200A) // CMT Primary Prescaler Register #define CMT_DMA (*(volatile uint8_t *)0x4006200B) // CMT Direct Memory Access Register // Chapter 39: Real Time Clock (RTC) #define RTC_TSR (*(volatile uint32_t *)0x4003D000) // RTC Time Seconds Register #define RTC_TPR (*(volatile uint32_t *)0x4003D004) // RTC Time Prescaler Register #define RTC_TAR (*(volatile uint32_t *)0x4003D008) // RTC Time Alarm Register #define RTC_TCR (*(volatile uint32_t *)0x4003D00C) // RTC Time Compensation Register #define RTC_TCR_CIC(n) (((n) & 255) << 24) // Compensation Interval Counter #define RTC_TCR_TCV(n) (((n) & 255) << 16) // Time Compensation Value #define RTC_TCR_CIR(n) (((n) & 255) << 8) // Compensation Interval Register #define RTC_TCR_TCR(n) (((n) & 255) << 0) // Time Compensation Register #define RTC_CR (*(volatile uint32_t *)0x4003D010) // RTC Control Register #define RTC_CR_SC2P ((uint32_t)0x00002000) // #define RTC_CR_SC4P ((uint32_t)0x00001000) // #define RTC_CR_SC8P ((uint32_t)0x00000800) // #define RTC_CR_SC16P ((uint32_t)0x00000400) // #define RTC_CR_CLKO ((uint32_t)0x00000200) // #define RTC_CR_OSCE ((uint32_t)0x00000100) // #define RTC_CR_UM ((uint32_t)0x00000008) // #define RTC_CR_SUP ((uint32_t)0x00000004) // #define RTC_CR_WPE ((uint32_t)0x00000002) // #define RTC_CR_SWR ((uint32_t)0x00000001) // #define RTC_SR (*(volatile uint32_t *)0x4003D014) // RTC Status Register #define RTC_SR_TCE ((uint32_t)0x00000010) // #define RTC_SR_TAF ((uint32_t)0x00000004) // #define RTC_SR_TOF ((uint32_t)0x00000002) // #define RTC_SR_TIF ((uint32_t)0x00000001) // #define RTC_LR (*(volatile uint32_t *)0x4003D018) // RTC Lock Register #define RTC_IER (*(volatile uint32_t *)0x4003D01C) // RTC Interrupt Enable Register #define RTC_WAR (*(volatile uint32_t *)0x4003D800) // RTC Write Access Register #define RTC_RAR (*(volatile uint32_t *)0x4003D804) // RTC Read Access Register // Chapter 40: Universal Serial Bus OTG Controller (USBOTG) #define USB0_PERID (*(const uint8_t *)0x40072000) // Peripheral ID register #define USB0_IDCOMP (*(const uint8_t *)0x40072004) // Peripheral ID Complement register #define USB0_REV (*(const uint8_t *)0x40072008) // Peripheral Revision register #define USB0_ADDINFO (*(volatile uint8_t *)0x4007200C) // Peripheral Additional Info register #define USB0_OTGISTAT (*(volatile uint8_t *)0x40072010) // OTG Interrupt Status register #define USB_OTGISTAT_IDCHG ((uint8_t)0x80) // #define USB_OTGISTAT_ONEMSEC ((uint8_t)0x40) // #define USB_OTGISTAT_LINE_STATE_CHG ((uint8_t)0x20) // #define USB_OTGISTAT_SESSVLDCHG ((uint8_t)0x08) // #define USB_OTGISTAT_B_SESS_CHG ((uint8_t)0x04) // #define USB_OTGISTAT_AVBUSCHG ((uint8_t)0x01) // #define USB0_OTGICR (*(volatile uint8_t *)0x40072014) // OTG Interrupt Control Register #define USB_OTGICR_IDEN ((uint8_t)0x80) // #define USB_OTGICR_ONEMSECEN ((uint8_t)0x40) // #define USB_OTGICR_LINESTATEEN ((uint8_t)0x20) // #define USB_OTGICR_SESSVLDEN ((uint8_t)0x08) // #define USB_OTGICR_BSESSEN ((uint8_t)0x04) // #define USB_OTGICR_AVBUSEN ((uint8_t)0x01) // #define USB0_OTGSTAT (*(volatile uint8_t *)0x40072018) // OTG Status register #define USB_OTGSTAT_ID ((uint8_t)0x80) // #define USB_OTGSTAT_ONEMSECEN ((uint8_t)0x40) // #define USB_OTGSTAT_LINESTATESTABLE ((uint8_t)0x20) // #define USB_OTGSTAT_SESS_VLD ((uint8_t)0x08) // #define USB_OTGSTAT_BSESSEND ((uint8_t)0x04) // #define USB_OTGSTAT_AVBUSVLD ((uint8_t)0x01) // #define USB0_OTGCTL (*(volatile uint8_t *)0x4007201C) // OTG Control Register #define USB_OTGCTL_DPHIGH ((uint8_t)0x80) // #define USB_OTGCTL_DPLOW ((uint8_t)0x20) // #define USB_OTGCTL_DMLOW ((uint8_t)0x10) // #define USB_OTGCTL_OTGEN ((uint8_t)0x04) // #define USB0_ISTAT (*(volatile uint8_t *)0x40072080) // Interrupt Status Register #define USB_ISTAT_STALL ((uint8_t)0x80) // #define USB_ISTAT_ATTACH ((uint8_t)0x40) // #define USB_ISTAT_RESUME ((uint8_t)0x20) // #define USB_ISTAT_SLEEP ((uint8_t)0x10) // #define USB_ISTAT_TOKDNE ((uint8_t)0x08) // #define USB_ISTAT_SOFTOK ((uint8_t)0x04) // #define USB_ISTAT_ERROR ((uint8_t)0x02) // #define USB_ISTAT_USBRST ((uint8_t)0x01) // #define USB0_INTEN (*(volatile uint8_t *)0x40072084) // Interrupt Enable Register #define USB_INTEN_STALLEN ((uint8_t)0x80) // #define USB_INTEN_ATTACHEN ((uint8_t)0x40) // #define USB_INTEN_RESUMEEN ((uint8_t)0x20) // #define USB_INTEN_SLEEPEN ((uint8_t)0x10) // #define USB_INTEN_TOKDNEEN ((uint8_t)0x08) // #define USB_INTEN_SOFTOKEN ((uint8_t)0x04) // #define USB_INTEN_ERROREN ((uint8_t)0x02) // #define USB_INTEN_USBRSTEN ((uint8_t)0x01) // #define USB0_ERRSTAT (*(volatile uint8_t *)0x40072088) // Error Interrupt Status Register #define USB_ERRSTAT_BTSERR ((uint8_t)0x80) // #define USB_ERRSTAT_DMAERR ((uint8_t)0x20) // #define USB_ERRSTAT_BTOERR ((uint8_t)0x10) // #define USB_ERRSTAT_DFN8 ((uint8_t)0x08) // #define USB_ERRSTAT_CRC16 ((uint8_t)0x04) // #define USB_ERRSTAT_CRC5EOF ((uint8_t)0x02) // #define USB_ERRSTAT_PIDERR ((uint8_t)0x01) // #define USB0_ERREN (*(volatile uint8_t *)0x4007208C) // Error Interrupt Enable Register #define USB_ERREN_BTSERREN ((uint8_t)0x80) // #define USB_ERREN_DMAERREN ((uint8_t)0x20) // #define USB_ERREN_BTOERREN ((uint8_t)0x10) // #define USB_ERREN_DFN8EN ((uint8_t)0x08) // #define USB_ERREN_CRC16EN ((uint8_t)0x04) // #define USB_ERREN_CRC5EOFEN ((uint8_t)0x02) // #define USB_ERREN_PIDERREN ((uint8_t)0x01) // #define USB0_STAT (*(volatile uint8_t *)0x40072090) // Status Register #define USB_STAT_TX ((uint8_t)0x08) // #define USB_STAT_ODD ((uint8_t)0x04) // #define USB_STAT_ENDP(n) ((uint8_t)((n) >> 4)) // #define USB0_CTL (*(volatile uint8_t *)0x40072094) // Control Register #define USB_CTL_JSTATE ((uint8_t)0x80) // #define USB_CTL_SE0 ((uint8_t)0x40) // #define USB_CTL_TXSUSPENDTOKENBUSY ((uint8_t)0x20) // #define USB_CTL_RESET ((uint8_t)0x10) // #define USB_CTL_HOSTMODEEN ((uint8_t)0x08) // #define USB_CTL_RESUME ((uint8_t)0x04) // #define USB_CTL_ODDRST ((uint8_t)0x02) // #define USB_CTL_USBENSOFEN ((uint8_t)0x01) // #define USB0_ADDR (*(volatile uint8_t *)0x40072098) // Address Register #define USB0_BDTPAGE1 (*(volatile uint8_t *)0x4007209C) // BDT Page Register 1 #define USB0_FRMNUML (*(volatile uint8_t *)0x400720A0) // Frame Number Register Low #define USB0_FRMNUMH (*(volatile uint8_t *)0x400720A4) // Frame Number Register High #define USB0_TOKEN (*(volatile uint8_t *)0x400720A8) // Token Register #define USB0_SOFTHLD (*(volatile uint8_t *)0x400720AC) // SOF Threshold Register #define USB0_BDTPAGE2 (*(volatile uint8_t *)0x400720B0) // BDT Page Register 2 #define USB0_BDTPAGE3 (*(volatile uint8_t *)0x400720B4) // BDT Page Register 3 #define USB0_ENDPT0 (*(volatile uint8_t *)0x400720C0) // Endpoint Control Register #define USB_ENDPT_HOSTWOHUB ((uint8_t)0x80) // host only, enable low speed #define USB_ENDPT_RETRYDIS ((uint8_t)0x40) // host only, set to disable NAK retry #define USB_ENDPT_EPCTLDIS ((uint8_t)0x10) // 0=control, 1=bulk, interrupt, isync #define USB_ENDPT_EPRXEN ((uint8_t)0x08) // enables the endpoint for RX transfers. #define USB_ENDPT_EPTXEN ((uint8_t)0x04) // enables the endpoint for TX transfers. #define USB_ENDPT_EPSTALL ((uint8_t)0x02) // set to stall endpoint #define USB_ENDPT_EPHSHK ((uint8_t)0x01) // enable handshaking during a transaction, generally set unless Isochronous #define USB0_ENDPT1 (*(volatile uint8_t *)0x400720C4) // Endpoint Control Register #define USB0_ENDPT2 (*(volatile uint8_t *)0x400720C8) // Endpoint Control Register #define USB0_ENDPT3 (*(volatile uint8_t *)0x400720CC) // Endpoint Control Register #define USB0_ENDPT4 (*(volatile uint8_t *)0x400720D0) // Endpoint Control Register #define USB0_ENDPT5 (*(volatile uint8_t *)0x400720D4) // Endpoint Control Register #define USB0_ENDPT6 (*(volatile uint8_t *)0x400720D8) // Endpoint Control Register #define USB0_ENDPT7 (*(volatile uint8_t *)0x400720DC) // Endpoint Control Register #define USB0_ENDPT8 (*(volatile uint8_t *)0x400720E0) // Endpoint Control Register #define USB0_ENDPT9 (*(volatile uint8_t *)0x400720E4) // Endpoint Control Register #define USB0_ENDPT10 (*(volatile uint8_t *)0x400720E8) // Endpoint Control Register #define USB0_ENDPT11 (*(volatile uint8_t *)0x400720EC) // Endpoint Control Register #define USB0_ENDPT12 (*(volatile uint8_t *)0x400720F0) // Endpoint Control Register #define USB0_ENDPT13 (*(volatile uint8_t *)0x400720F4) // Endpoint Control Register #define USB0_ENDPT14 (*(volatile uint8_t *)0x400720F8) // Endpoint Control Register #define USB0_ENDPT15 (*(volatile uint8_t *)0x400720FC) // Endpoint Control Register #define USB0_USBCTRL (*(volatile uint8_t *)0x40072100) // USB Control Register #define USB_USBCTRL_SUSP ((uint8_t)0x80) // Places the USB transceiver into the suspend state. #define USB_USBCTRL_PDE ((uint8_t)0x40) // Enables the weak pulldowns on the USB transceiver. #define USB0_OBSERVE (*(volatile uint8_t *)0x40072104) // USB OTG Observe Register #define USB_OBSERVE_DPPU ((uint8_t)0x80) // #define USB_OBSERVE_DPPD ((uint8_t)0x40) // #define USB_OBSERVE_DMPD ((uint8_t)0x10) // #define USB0_CONTROL (*(volatile uint8_t *)0x40072108) // USB OTG Control Register #define USB_CONTROL_DPPULLUPNONOTG ((uint8_t)0x10) // Provides control of the DP PULLUP in the USB OTG module, if USB is configured in non-OTG device mode. #define USB0_USBTRC0 (*(volatile uint8_t *)0x4007210C) // USB Transceiver Control Register 0 #define USB_USBTRC_USBRESET ((uint8_t)0x80) // #define USB_USBTRC_USBRESMEN ((uint8_t)0x20) // #define USB_USBTRC_SYNC_DET ((uint8_t)0x02) // #define USB_USBTRC_USB_RESUME_INT ((uint8_t)0x01) // #define USB0_USBFRMADJUST (*(volatile uint8_t *)0x40072114) // Frame Adjust Register // Chapter 41: USB Device Charger Detection Module (USBDCD) #define USBDCD_CONTROL (*(volatile uint32_t *)0x40035000) // Control register #define USBDCD_CLOCK (*(volatile uint32_t *)0x40035004) // Clock register #define USBDCD_STATUS (*(volatile uint32_t *)0x40035008) // Status register #define USBDCD_TIMER0 (*(volatile uint32_t *)0x40035010) // TIMER0 register #define USBDCD_TIMER1 (*(volatile uint32_t *)0x40035014) // TIMER1 register #define USBDCD_TIMER2 (*(volatile uint32_t *)0x40035018) // TIMER2 register #if defined(KINETISK) // Chapter 43: SPI (DSPI) typedef struct { volatile uint32_t MCR; // 0 volatile uint32_t unused1;// 4 volatile uint32_t TCR; // 8 volatile uint32_t CTAR0; // c volatile uint32_t CTAR1; // 10 volatile uint32_t CTAR2; // 14 volatile uint32_t CTAR3; // 18 volatile uint32_t CTAR4; // 1c volatile uint32_t CTAR5; // 20 volatile uint32_t CTAR6; // 24 volatile uint32_t CTAR7; // 28 volatile uint32_t SR; // 2c volatile uint32_t RSER; // 30 volatile uint32_t PUSHR; // 34 volatile uint32_t POPR; // 38 volatile uint32_t TXFR[16]; // 3c volatile uint32_t RXFR[16]; // 7c } KINETISK_SPI_t; #define KINETISK_SPI0 (*(KINETISK_SPI_t *)0x4002C000) #define SPI0_MCR (KINETISK_SPI0.MCR) // DSPI Module Configuration Register #define SPI_MCR_MSTR ((uint32_t)0x80000000) // Master/Slave Mode Select #define SPI_MCR_CONT_SCKE ((uint32_t)0x40000000) // #define SPI_MCR_DCONF(n) (((n) & 3) << 28) // #define SPI_MCR_FRZ ((uint32_t)0x08000000) // #define SPI_MCR_MTFE ((uint32_t)0x04000000) // #define SPI_MCR_ROOE ((uint32_t)0x01000000) // #define SPI_MCR_PCSIS(n) (((n) & 0x1F) << 16) // #define SPI_MCR_DOZE ((uint32_t)0x00008000) // #define SPI_MCR_MDIS ((uint32_t)0x00004000) // #define SPI_MCR_DIS_TXF ((uint32_t)0x00002000) // #define SPI_MCR_DIS_RXF ((uint32_t)0x00001000) // #define SPI_MCR_CLR_TXF ((uint32_t)0x00000800) // #define SPI_MCR_CLR_RXF ((uint32_t)0x00000400) // #define SPI_MCR_SMPL_PT(n) (((n) & 3) << 8) // #define SPI_MCR_HALT ((uint32_t)0x00000001) // #define SPI0_TCR (KINETISK_SPI0.TCR) // DSPI Transfer Count Register #define SPI0_CTAR0 (KINETISK_SPI0.CTAR0) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI_CTAR_DBR ((uint32_t)0x80000000) // Double Baud Rate #define SPI_CTAR_FMSZ(n) (((n) & 15) << 27) // Frame Size (+1) #define SPI_CTAR_CPOL ((uint32_t)0x04000000) // Clock Polarity #define SPI_CTAR_CPHA ((uint32_t)0x02000000) // Clock Phase #define SPI_CTAR_LSBFE ((uint32_t)0x01000000) // LSB First #define SPI_CTAR_PCSSCK(n) (((n) & 3) << 22) // PCS to SCK Delay Prescaler #define SPI_CTAR_PASC(n) (((n) & 3) << 20) // After SCK Delay Prescaler #define SPI_CTAR_PDT(n) (((n) & 3) << 18) // Delay after Transfer Prescaler #define SPI_CTAR_PBR(n) (((n) & 3) << 16) // Baud Rate Prescaler #define SPI_CTAR_CSSCK(n) (((n) & 15) << 12) // PCS to SCK Delay Scaler #define SPI_CTAR_ASC(n) (((n) & 15) << 8) // After SCK Delay Scaler #define SPI_CTAR_DT(n) (((n) & 15) << 4) // Delay After Transfer Scaler #define SPI_CTAR_BR(n) (((n) & 15) << 0) // Baud Rate Scaler #define SPI0_CTAR0_SLAVE (KINETISK_SPI0.CTAR0) // DSPI Clock and Transfer Attributes Register, In Slave Mode #define SPI0_CTAR1 (KINETISK_SPI0.CTAR1) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI0_SR (KINETISK_SPI0.SR) // DSPI Status Register #define SPI_SR_TCF ((uint32_t)0x80000000) // Transfer Complete Flag #define SPI_SR_TXRXS ((uint32_t)0x40000000) // TX and RX Status #define SPI_SR_EOQF ((uint32_t)0x10000000) // End of Queue Flag #define SPI_SR_TFUF ((uint32_t)0x08000000) // Transmit FIFO Underflow Flag #define SPI_SR_TFFF ((uint32_t)0x02000000) // Transmit FIFO Fill Flag #define SPI_SR_RFOF ((uint32_t)0x00080000) // Receive FIFO Overflow Flag #define SPI_SR_RFDF ((uint32_t)0x00020000) // Receive FIFO Drain Flag #define SPI0_RSER (KINETISK_SPI0.RSER) // DSPI DMA/Interrupt Request Select and Enable Register #define SPI_RSER_TCF_RE ((uint32_t)0x80000000) // Transmission Complete Request Enable #define SPI_RSER_EOQF_RE ((uint32_t)0x10000000) // DSPI Finished Request Request Enable #define SPI_RSER_TFUF_RE ((uint32_t)0x08000000) // Transmit FIFO Underflow Request Enable #define SPI_RSER_TFFF_RE ((uint32_t)0x02000000) // Transmit FIFO Fill Request Enable #define SPI_RSER_TFFF_DIRS ((uint32_t)0x01000000) // Transmit FIFO FIll Dma or Interrupt Request Select #define SPI_RSER_RFOF_RE ((uint32_t)0x00080000) // Receive FIFO Overflow Request Enable #define SPI_RSER_RFDF_RE ((uint32_t)0x00020000) // Receive FIFO Drain Request Enable #define SPI_RSER_RFDF_DIRS ((uint32_t)0x00010000) // Receive FIFO Drain DMA or Interrupt Request Select #define SPI0_PUSHR (KINETISK_SPI0.PUSHR) // DSPI PUSH TX FIFO Register In Master Mode #define SPI_PUSHR_CONT ((uint32_t)0x80000000) // #define SPI_PUSHR_CTAS(n) (((n) & 7) << 28) // #define SPI_PUSHR_EOQ ((uint32_t)0x08000000) // #define SPI_PUSHR_CTCNT ((uint32_t)0x04000000) // #define SPI_PUSHR_PCS(n) (((n) & 31) << 16) // #define SPI0_PUSHR_SLAVE (KINETISK_SPI0.PUSHR) // DSPI PUSH TX FIFO Register In Slave Mode #define SPI0_POPR (KINETISK_SPI0.POPR) // DSPI POP RX FIFO Register #define SPI0_TXFR0 (KINETISK_SPI0.TXFR[0]) // DSPI Transmit FIFO Registers #define SPI0_TXFR1 (KINETISK_SPI0.TXFR[1]) // DSPI Transmit FIFO Registers #define SPI0_TXFR2 (KINETISK_SPI0.TXFR[2]) // DSPI Transmit FIFO Registers #define SPI0_TXFR3 (KINETISK_SPI0.TXFR[3]) // DSPI Transmit FIFO Registers #define SPI0_RXFR0 (KINETISK_SPI0.RXFR[0]) // DSPI Receive FIFO Registers #define SPI0_RXFR1 (KINETISK_SPI0.RXFR[1]) // DSPI Receive FIFO Registers #define SPI0_RXFR2 (KINETISK_SPI0.RXFR[2]) // DSPI Receive FIFO Registers #define SPI0_RXFR3 (KINETISK_SPI0.RXFR[3]) // DSPI Receive FIFO Registers #elif defined(KINETISL) typedef struct { volatile uint8_t S; volatile uint8_t BR; volatile uint8_t C2; volatile uint8_t C1; volatile uint8_t ML; volatile uint8_t MH; volatile uint8_t DL; volatile uint8_t DH; volatile uint8_t unused1; volatile uint8_t unused2; volatile uint8_t CI; volatile uint8_t C3; } KINETISL_SPI_t; #define KINETISL_SPI0 (*(KINETISL_SPI_t *)0x40076000) #define KINETISL_SPI1 (*(KINETISL_SPI_t *)0x40077000) #define SPI0_S (KINETISL_SPI0.S) // Status #define SPI_S_SPRF ((uint8_t)0x80) // Read Buffer Full Flag #define SPI_S_SPMF ((uint8_t)0x40) // Match Flag #define SPI_S_SPTEF ((uint8_t)0x20) // Transmit Buffer Empty Flag #define SPI_S_MODF ((uint8_t)0x10) // Fault Flag #define SPI_S_RNFULLF ((uint8_t)0x08) // Receive FIFO nearly full flag #define SPI_S_TNEAREF ((uint8_t)0x04) // Transmit FIFO nearly empty flag #define SPI_S_TXFULLF ((uint8_t)0x02) // Transmit FIFO full flag #define SPI_S_RFIFOEF ((uint8_t)0x01) // Read FIFO empty flag #define SPI0_BR (KINETISL_SPI0.BR) // Baud Rate #define SPI_BR_SPPR(n) (((n) & 7) << 4) // Prescale = N+1 #define SPI_BR_SPR(n) (((n) & 15) << 0) // Baud Rate Divisor = 2^(N+1) : 0-8 -> 2 to 512 #define SPI0_C2 (KINETISL_SPI0.C2) // Control Register 2 #define SPI_C2_SPMIE ((uint8_t)0x80) // Match Interrupt Enable #define SPI_C2_SPIMODE ((uint8_t)0x40) // 0 = 8 bit mode, 1 = 16 bit mode #define SPI_C2_TXDMAE ((uint8_t)0x20) // Transmit DMA enable #define SPI_C2_MODFEN ((uint8_t)0x10) // Master Mode-Fault Function Enable #define SPI_C2_BIDIROE ((uint8_t)0x08) // Bidirectional Mode Output Enable #define SPI_C2_RXDMAE ((uint8_t)0x04) // Receive DMA enable #define SPI_C2_SPISWAI ((uint8_t)0x02) // SPI Stop in Wait Mode #define SPI_C2_SPC0 ((uint8_t)0x01) // SPI Pin Control, 0=normal, 1=single bidirectional #define SPI0_C1 (KINETISL_SPI0.C1) // Control Register 1 #define SPI_C1_SPIE ((uint8_t)0x80) // Interrupt Enable #define SPI_C1_SPE ((uint8_t)0x40) // SPI System Enable #define SPI_C1_SPTIE ((uint8_t)0x20) // Transmit Interrupt Enable #define SPI_C1_MSTR ((uint8_t)0x10) // Master/Slave Mode: 0=slave, 1=master #define SPI_C1_CPOL ((uint8_t)0x08) // Clock Polarity #define SPI_C1_CPHA ((uint8_t)0x04) // Clock Phase #define SPI_C1_SSOE ((uint8_t)0x02) // Slave Select Output Enable #define SPI_C1_LSBFE ((uint8_t)0x01) // LSB First: 0=MSB First, 1=LSB First #define SPI0_ML (KINETISL_SPI0.ML) // Match Low #define SPI0_MH (KINETISL_SPI0.MH) // Match High #define SPI0_DL (KINETISL_SPI0.DL) // Data Low #define SPI0_DH (KINETISL_SPI0.DH) // Data High #define SPI0_CI (KINETISL_SPI0.CI) // Clear Interrupt #define SPI_CI_TXFERR ((uint8_t)0x80) // Transmit FIFO error flag #define SPI_CI_RXFERR ((uint8_t)0x40) // Receive FIFO error flag #define SPI_CI_TXFOF ((uint8_t)0x20) // Transmit FIFO overflow flag #define SPI_CI_RXFOF ((uint8_t)0x10) // Receive FIFO overflow flag #define SPI_CI_TNEAREFCI ((uint8_t)0x08) // Transmit FIFO nearly empty flag clear interrupt #define SPI_CI_RNFULLFCI ((uint8_t)0x04) // Receive FIFO nearly full flag clear interrupt #define SPI_CI_SPTEFCI ((uint8_t)0x02) // Transmit FIFO empty flag clear interrupt #define SPI_CI_SPRFCI ((uint8_t)0x01) // Receive FIFO full flag clear interrupt #define SPI0_C3 (KINETISL_SPI0.C3) // Control Register 3 #define SPI_C3_TNEAREF_MARK ((uint8_t)0x20) // Transmit FIFO nearly empty watermark #define SPI_C3_RNFULLF_MARK ((uint8_t)0x10) // Receive FIFO nearly full watermark #define SPI_C3_INTCLR ((uint8_t)0x08) // Interrupt clearing mechanism select #define SPI_C3_TNEARIEN ((uint8_t)0x04) // Transmit FIFO nearly empty interrupt enable #define SPI_C3_RNFULLIEN ((uint8_t)0x02) // Receive FIFO nearly full interrupt enable #define SPI_C3_FIFOMODE ((uint8_t)0x01) // FIFO mode enable #define SPI1_S (KINETISL_SPI1.S) // Status #define SPI1_BR (KINETISL_SPI1.BR) // Baud Rate #define SPI1_C2 (KINETISL_SPI1.C2) // Control Register 2 #define SPI1_C1 (KINETISL_SPI1.C1) // Control Register 1 #define SPI1_ML (KINETISL_SPI1.ML) // Match Low #define SPI1_MH (KINETISL_SPI1.MH) // Match High #define SPI1_DL (KINETISL_SPI1.DL) // Data Low #define SPI1_DH (KINETISL_SPI1.DH) // Data High #define SPI1_CI (KINETISL_SPI1.CI) // Dlear Interrupt #define SPI1_C3 (KINETISL_SPI1.C3) // Control Register 3 #endif // Chapter 44: Inter-Integrated Circuit (I2C) typedef struct { volatile uint8_t A1; volatile uint8_t F; volatile uint8_t C1; volatile uint8_t S; volatile uint8_t D; volatile uint8_t C2; volatile uint8_t FLT; volatile uint8_t RA; volatile uint8_t SMB; volatile uint8_t A2; volatile uint8_t SLTH; volatile uint8_t SLTL; } KINETIS_I2C_t; #define KINETIS_I2C0 (*(KINETIS_I2C_t *)0x40066000) #define KINETIS_I2C1 (*(KINETIS_I2C_t *)0x40067000) #define I2C0_A1 (KINETIS_I2C0.A1) // I2C Address Register 1 #define I2C0_F (KINETIS_I2C0.F) // I2C Frequency Divider register #define I2C0_C1 (KINETIS_I2C0.C1) // I2C Control Register 1 #define I2C_C1_IICEN ((uint8_t)0x80) // I2C Enable #define I2C_C1_IICIE ((uint8_t)0x40) // I2C Interrupt Enable #define I2C_C1_MST ((uint8_t)0x20) // Master Mode Select #define I2C_C1_TX ((uint8_t)0x10) // Transmit Mode Select #define I2C_C1_TXAK ((uint8_t)0x08) // Transmit Acknowledge Enable #define I2C_C1_RSTA ((uint8_t)0x04) // Repeat START #define I2C_C1_WUEN ((uint8_t)0x02) // Wakeup Enable #define I2C_C1_DMAEN ((uint8_t)0x01) // DMA Enable #define I2C0_S (KINETIS_I2C0.S) // I2C Status register #define I2C_S_TCF ((uint8_t)0x80) // Transfer Complete Flag #define I2C_S_IAAS ((uint8_t)0x40) // Addressed As A Slave #define I2C_S_BUSY ((uint8_t)0x20) // Bus Busy #define I2C_S_ARBL ((uint8_t)0x10) // Arbitration Lost #define I2C_S_RAM ((uint8_t)0x08) // Range Address Match #define I2C_S_SRW ((uint8_t)0x04) // Slave Read/Write #define I2C_S_IICIF ((uint8_t)0x02) // Interrupt Flag #define I2C_S_RXAK ((uint8_t)0x01) // Receive Acknowledge #define I2C0_D (KINETIS_I2C0.D) // I2C Data I/O register #define I2C0_C2 (KINETIS_I2C0.C2) // I2C Control Register 2 #define I2C_C2_GCAEN ((uint8_t)0x80) // General Call Address Enable #define I2C_C2_ADEXT ((uint8_t)0x40) // Address Extension #define I2C_C2_HDRS ((uint8_t)0x20) // High Drive Select #define I2C_C2_SBRC ((uint8_t)0x10) // Slave Baud Rate Control #define I2C_C2_RMEN ((uint8_t)0x08) // Range Address Matching Enable #define I2C_C2_AD(n) ((n) & 7) // Slave Address, upper 3 bits #define I2C0_FLT (KINETIS_I2C0.FLT) // I2C Programmable Input Glitch Filter register #define I2C_FLT_SHEN ((uint8_t)0x80) // Stop Hold Enable #define I2C_FLT_STOPF ((uint8_t)0x40) // Stop Detect Flag #define I2C_FLT_STOPIE ((uint8_t)0x20) // Stop Interrupt Enable #define I2C_FLT_FTL(n) ((n) & 0x1F) // Programmable Filter Factor #define I2C0_RA (KINETIS_I2C0.RA) // I2C Range Address register #define I2C0_SMB (KINETIS_I2C0.SMB) // I2C SMBus Control and Status register #define I2C0_A2 (KINETIS_I2C0.A2) // I2C Address Register 2 #define I2C0_SLTH (KINETIS_I2C0.SLTH) // I2C SCL Low Timeout Register High #define I2C0_SLTL (KINETIS_I2C0.SLTL) // I2C SCL Low Timeout Register Low #define I2C1_A1 (KINETIS_I2C1.A1) // I2C Address Register 1 #define I2C1_F (KINETIS_I2C1.F) // I2C Frequency Divider register #define I2C1_C1 (KINETIS_I2C1.C1) // I2C Control Register 1 #define I2C1_S (KINETIS_I2C1.S) // I2C Status register #define I2C1_D (KINETIS_I2C1.D) // I2C Data I/O register #define I2C1_C2 (KINETIS_I2C1.C2) // I2C Control Register 2 #define I2C1_FLT (KINETIS_I2C1.FLT) // I2C Programmable Input Glitch Filter register #define I2C1_RA (KINETIS_I2C1.RA) // I2C Range Address register #define I2C1_SMB (KINETIS_I2C1.SMB) // I2C SMBus Control and Status register #define I2C1_A2 (KINETIS_I2C1.A2) // I2C Address Register 2 #define I2C1_SLTH (KINETIS_I2C1.SLTH) // I2C SCL Low Timeout Register High #define I2C1_SLTL (KINETIS_I2C1.SLTL) // I2C SCL Low Timeout Register Low // Chapter 45: Universal Asynchronous Receiver/Transmitter (UART) typedef struct __attribute__((packed)) { volatile uint8_t BDH; volatile uint8_t BDL; volatile uint8_t C1; volatile uint8_t C2; volatile uint8_t S1; volatile uint8_t S2; volatile uint8_t C3; volatile uint8_t D; volatile uint8_t MA1; volatile uint8_t MA2; volatile uint8_t C4; volatile uint8_t C5; volatile uint8_t ED; volatile uint8_t MODEM; volatile uint8_t IR; volatile uint8_t unused1; volatile uint8_t PFIFO; volatile uint8_t CFIFO; volatile uint8_t SFIFO; volatile uint8_t TWFIFO; volatile uint8_t TCFIFO; volatile uint8_t RWFIFO; volatile uint8_t RCFIFO; volatile uint8_t unused2; volatile uint8_t C7816; volatile uint8_t IE7816; volatile uint8_t IS7816; union { volatile uint8_t WP7816T0; volatile uint8_t WP7816T1; }; volatile uint8_t WN7816; volatile uint8_t WF7816; volatile uint8_t ET7816; volatile uint8_t TL7816; volatile uint8_t unused3; volatile uint8_t C6; volatile uint8_t PCTH; volatile uint8_t PCTL; volatile uint8_t B1T; volatile uint8_t SDTH; volatile uint8_t SDTL; volatile uint8_t PRE; volatile uint8_t TPL; volatile uint8_t IE; volatile uint8_t WB; volatile uint8_t S3; volatile uint8_t S4; volatile uint8_t RPL; volatile uint8_t RPREL; volatile uint8_t CPW; volatile uint8_t RIDT; volatile uint8_t TIDT; } KINETISK_UART_t; #define KINETISK_UART0 (*(KINETISK_UART_t *)0x4006A000) #define UART0_BDH (KINETISK_UART0.BDH) // UART Baud Rate Registers: High #define UART0_BDL (KINETISK_UART0.BDL) // UART Baud Rate Registers: Low #define UART0_C1 (KINETISK_UART0.C1) // UART Control Register 1 #define UART_C1_LOOPS 0x80 // When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input #define UART_C1_UARTSWAI 0x40 // UART Stops in Wait Mode #define UART_C1_RSRC 0x20 // When LOOPS is set, the RSRC field determines the source for the receiver shift register input #define UART_C1_M 0x10 // 9-bit or 8-bit Mode Select #define UART_C1_WAKE 0x08 // Determines which condition wakes the UART #define UART_C1_ILT 0x04 // Idle Line Type Select #define UART_C1_PE 0x02 // Parity Enable #define UART_C1_PT 0x01 // Parity Type, 0=even, 1=odd #define UART0_C2 (KINETISK_UART0.C2) // UART Control Register 2 #define UART_C2_TIE 0x80 // Transmitter Interrupt or DMA Transfer Enable. #define UART_C2_TCIE 0x40 // Transmission Complete Interrupt Enable #define UART_C2_RIE 0x20 // Receiver Full Interrupt or DMA Transfer Enable #define UART_C2_ILIE 0x10 // Idle Line Interrupt Enable #define UART_C2_TE 0x08 // Transmitter Enable #define UART_C2_RE 0x04 // Receiver Enable #define UART_C2_RWU 0x02 // Receiver Wakeup Control #define UART_C2_SBK 0x01 // Send Break #define UART0_S1 (KINETISK_UART0.S1) // UART Status Register 1 #define UART_S1_TDRE 0x80 // Transmit Data Register Empty Flag #define UART_S1_TC 0x40 // Transmit Complete Flag #define UART_S1_RDRF 0x20 // Receive Data Register Full Flag #define UART_S1_IDLE 0x10 // Idle Line Flag #define UART_S1_OR 0x08 // Receiver Overrun Flag #define UART_S1_NF 0x04 // Noise Flag #define UART_S1_FE 0x02 // Framing Error Flag #define UART_S1_PF 0x01 // Parity Error Flag #define UART0_S2 (KINETISK_UART0.S2) // UART Status Register 2 #define UART0_C3 (KINETISK_UART0.C3) // UART Control Register 3 #define UART0_D (KINETISK_UART0.D) // UART Data Register #define UART0_MA1 (KINETISK_UART0.MA1) // UART Match Address Registers 1 #define UART0_MA2 (KINETISK_UART0.MA2) // UART Match Address Registers 2 #define UART0_C4 (KINETISK_UART0.C4) // UART Control Register 4 #define UART0_C5 (KINETISK_UART0.C5) // UART Control Register 5 #define UART0_ED (KINETISK_UART0.ED) // UART Extended Data Register #define UART0_MODEM (KINETISK_UART0.MODEM) // UART Modem Register #define UART0_IR (KINETISK_UART0.IR) // UART Infrared Register #define UART0_PFIFO (KINETISK_UART0.PFIFO) // UART FIFO Parameters #define UART_PFIFO_TXFE 0x80 // Transmit FIFO Enable #define UART_PFIFO_TXFIFOSIZE(n) (((n) & 7) << 4) // Transmit FIFO Size, 0=1, 1=4, 2=8, 3=16, 4=32, 5=64, 6=128 #define UART_PFIFO_RXFE 0x08 // Receive FIFO Enable #define UART_PFIFO_RXFIFOSIZE(n) (((n) & 7) << 0) // Transmit FIFO Size, 0=1, 1=4, 2=8, 3=16, 4=32, 5=64, 6=128 #define UART0_CFIFO (KINETISK_UART0.CFIFO) // UART FIFO Control Register #define UART_CFIFO_TXFLUSH 0x80 // Transmit FIFO/Buffer Flush #define UART_CFIFO_RXFLUSH 0x40 // Receive FIFO/Buffer Flush #define UART_CFIFO_RXOFE 0x04 // Receive FIFO Overflow Interrupt Enable #define UART_CFIFO_TXOFE 0x02 // Transmit FIFO Overflow Interrupt Enable #define UART_CFIFO_RXUFE 0x01 // Receive FIFO Underflow Interrupt Enable #define UART0_SFIFO (KINETISK_UART0.SFIFO) // UART FIFO Status Register #define UART_SFIFO_TXEMPT 0x80 // Transmit Buffer/FIFO Empty #define UART_SFIFO_RXEMPT 0x40 // Receive Buffer/FIFO Empty #define UART_SFIFO_RXOF 0x04 // Receiver Buffer Overflow Flag #define UART_SFIFO_TXOF 0x02 // Transmitter Buffer Overflow Flag #define UART_SFIFO_RXUF 0x01 // Receiver Buffer Underflow Flag #define UART0_TWFIFO (KINETISK_UART0.TWFIFO) // UART FIFO Transmit Watermark #define UART0_TCFIFO (KINETISK_UART0.TCFIFO) // UART FIFO Transmit Count #define UART0_RWFIFO (KINETISK_UART0.RWFIFO) // UART FIFO Receive Watermark #define UART0_RCFIFO (KINETISK_UART0.RCFIFO) // UART FIFO Receive Count #define UART0_C7816 (KINETISK_UART0.C7816) // UART 7816 Control Register #define UART_C7816_ONACK 0x10 // Generate NACK on Overflow #define UART_C7816_ANACK 0x08 // Generate NACK on Error #define UART_C7816_INIT 0x04 // Detect Initial Character #define UART_C7816_TTYPE 0x02 // Transfer Type #define UART_C7816_ISO_7816E 0x01 // ISO-7816 Functionality Enabled #define UART0_IE7816 (KINETISK_UART0.IE7816) // UART 7816 Interrupt Enable Register #define UART_IE7816_WTE 0x80 // Wait Timer Interrupt Enable #define UART_IE7816_CWTE 0x40 // Character Wait Timer Interrupt Enable #define UART_IE7816_BWTE 0x20 // Block Wait Timer Interrupt Enable #define UART_IE7816_INITDE 0x10 // Initial Character Detected Interrupt Enable #define UART_IE7816_GTVE 0x04 // Guard Timer Violated Interrupt Enable #define UART_IE7816_TXTE 0x02 // Transmit Threshold Exceeded Interrupt Enable #define UART_IE7816_RXTE 0x01 // Receive Threshold Exceeded Interrupt Enable #define UART0_IS7816 (KINETISK_UART0.IS7816) // UART 7816 Interrupt Status Register #define UART_IS7816_WT 0x80 // Wait Timer Interrupt #define UART_IS7816_CWT 0x40 // Character Wait Timer Interrupt #define UART_IS7816_BWT 0x20 // Block Wait Timer Interrupt #define UART_IS7816_INITD 0x10 // Initial Character Detected Interrupt #define UART_IS7816_GTV 0x04 // Guard Timer Violated Interrupt #define UART_IS7816_TXT 0x02 // Transmit Threshold Exceeded Interrupt #define UART_IS7816_RXT 0x01 // Receive Threshold Exceeded Interrupt #define UART0_WP7816T0 (KINETISK_UART0.WP7816T0) // UART 7816 Wait Parameter Register #define UART0_WP7816T1 (KINETISK_UART0.WP7816T1) // UART 7816 Wait Parameter Register #define UART_WP7816T1_CWI(n) (((n) & 15) << 4) // Character Wait Time Integer (C7816[TTYPE] = 1) #define UART_WP7816T1_BWI(n) (((n) & 15) << 0) // Block Wait Time Integer(C7816[TTYPE] = 1) #define UART0_WN7816 (KINETISK_UART0.WN7816) // UART 7816 Wait N Register #define UART0_WF7816 (KINETISK_UART0.WF7816) // UART 7816 Wait FD Register #define UART0_ET7816 (KINETISK_UART0.ET7816) // UART 7816 Error Threshold Register #define UART_ET7816_TXTHRESHOLD(n) (((n) & 15) << 4) // Transmit NACK Threshold #define UART_ET7816_RXTHRESHOLD(n) (((n) & 15) << 0) // Receive NACK Threshold #define UART0_TL7816 (KINETISK_UART0.TL7816) // UART 7816 Transmit Length Register #define UART0_C6 (KINETISK_UART0.C6) // UART CEA709.1-B Control Register 6 #define UART_C6_EN709 0x80 // Enables the CEA709.1-B feature. #define UART_C6_TX709 0x40 // Starts CEA709.1-B transmission. #define UART_C6_CE 0x20 // Collision Enable #define UART_C6_CP 0x10 // Collision Signal Polarity #define UART0_PCTH (KINETISK_UART0.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High #define UART0_PCTL (KINETISK_UART0.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low #define UART0_B1T (KINETISK_UART0.B1T) // UART CEA709.1-B Beta1 Timer #define UART0_SDTH (KINETISK_UART0.SDTH) // UART CEA709.1-B Secondary Delay Timer High #define UART0_SDTL (KINETISK_UART0.SDTL) // UART CEA709.1-B Secondary Delay Timer Low #define UART0_PRE (KINETISK_UART0.PRE) // UART CEA709.1-B Preamble #define UART0_TPL (KINETISK_UART0.TPL) // UART CEA709.1-B Transmit Packet Length #define UART0_IE (KINETISK_UART0.IE) // UART CEA709.1-B Interrupt Enable Register #define UART_IE_WBEIE 0x40 // WBASE Expired Interrupt Enable #define UART_IE_ISDIE 0x20 // Initial Sync Detection Interrupt Enable #define UART_IE_PRXIE 0x10 // Packet Received Interrupt Enable #define UART_IE_PTXIE 0x08 // Packet Transmitted Interrupt Enable #define UART_IE_PCTEIE 0x04 // Packet Cycle Timer Interrupt Enable #define UART_IE_PSIE 0x02 // Preamble Start Interrupt Enable #define UART_IE_TXFIE 0x01 // Transmission Fail Interrupt Enable #define UART0_WB (KINETISK_UART0.WB) // UART CEA709.1-B WBASE #define UART0_S3 (KINETISK_UART0.S3) // UART CEA709.1-B Status Register #define UART_S3_PEF 0x80 // Preamble Error Flag #define UART_S3_WBEF 0x40 // Wbase Expired Flag #define UART_S3_ISD 0x20 // Initial Sync Detect #define UART_S3_PRXF 0x10 // Packet Received Flag #define UART_S3_PTXF 0x08 // Packet Transmitted Flag #define UART_S3_PCTEF 0x04 // Packet Cycle Timer Expired Flag #define UART_S3_PSF 0x02 // Preamble Start Flag #define UART_S3_TXFF 0x01 // Transmission Fail Flag #define UART0_S4 (KINETISK_UART0.S4) // UART CEA709.1-B Status Register #define UART_S4_INITF 0x10 // Initial Synchronization Fail Flag #define UART_S4_CDET(n) (((n) & 3) << 2) // Indicates collision: 0=none, 1=preamble, 2=data, 3=line code violation #define UART_S4_ILCV 0x02 // Improper Line Code Violation #define UART_S4_FE 0x01 // Framing Error #define UART0_RPL (KINETISK_UART0.RPL) // UART CEA709.1-B Received Packet Length #define UART0_RPREL (KINETISK_UART0.RPREL) // UART CEA709.1-B Received Preamble Length #define UART0_CPW (KINETISK_UART0.CPW) // UART CEA709.1-B Collision Pulse Width #define UART0_RIDT (KINETISK_UART0.RIDT) // UART CEA709.1-B Receive Indeterminate Time #define UART0_TIDT (KINETISK_UART0.TIDT) // UART CEA709.1-B Transmit Indeterminate Time #define KINETISK_UART1 (*(KINETISK_UART_t *)0x4006B000) #define UART1_BDH (KINETISK_UART1.BDH) // UART Baud Rate Registers: High #define UART1_BDL (KINETISK_UART1.BDL) // UART Baud Rate Registers: Low #define UART1_C1 (KINETISK_UART1.C1) // UART Control Register 1 #define UART1_C2 (KINETISK_UART1.C2) // UART Control Register 2 #define UART1_S1 (KINETISK_UART1.S1) // UART Status Register 1 #define UART1_S2 (KINETISK_UART1.S2) // UART Status Register 2 #define UART1_C3 (KINETISK_UART1.C3) // UART Control Register 3 #define UART1_D (KINETISK_UART1.D) // UART Data Register #define UART1_MA1 (KINETISK_UART1.MA1) // UART Match Address Registers 1 #define UART1_MA2 (KINETISK_UART1.MA2) // UART Match Address Registers 2 #define UART1_C4 (KINETISK_UART1.C4) // UART Control Register 4 #define UART1_C5 (KINETISK_UART1.C5) // UART Control Register 5 #define UART1_ED (KINETISK_UART1.ED) // UART Extended Data Register #define UART1_MODEM (KINETISK_UART1.MODEM) // UART Modem Register #define UART1_IR (KINETISK_UART1.IR) // UART Infrared Register #define UART1_PFIFO (KINETISK_UART1.PFIFO) // UART FIFO Parameters #define UART1_CFIFO (KINETISK_UART1.CFIFO) // UART FIFO Control Register #define UART1_SFIFO (KINETISK_UART1.SFIFO) // UART FIFO Status Register #define UART1_TWFIFO (KINETISK_UART1.TWFIFO) // UART FIFO Transmit Watermark #define UART1_TCFIFO (KINETISK_UART1.TCFIFO) // UART FIFO Transmit Count #define UART1_RWFIFO (KINETISK_UART1.RWFIFO) // UART FIFO Receive Watermark #define UART1_RCFIFO (KINETISK_UART1.RCFIFO) // UART FIFO Receive Count #define UART1_C7816 (KINETISK_UART1.C7816) // UART 7816 Control Register #define UART1_IE7816 (KINETISK_UART1.IE7816) // UART 7816 Interrupt Enable Register #define UART1_IS7816 (KINETISK_UART1.IS7816) // UART 7816 Interrupt Status Register #define UART1_WP7816T0 (KINETISK_UART1.WP7816T0)// UART 7816 Wait Parameter Register #define UART1_WP7816T1 (KINETISK_UART1.WP7816T1)// UART 7816 Wait Parameter Register #define UART1_WN7816 (KINETISK_UART1.WN7816) // UART 7816 Wait N Register #define UART1_WF7816 (KINETISK_UART1.WF7816) // UART 7816 Wait FD Register #define UART1_ET7816 (KINETISK_UART1.ET7816) // UART 7816 Error Threshold Register #define UART1_TL7816 (KINETISK_UART1.TL7816) // UART 7816 Transmit Length Register #define UART1_C6 (KINETISK_UART1.C6) // UART CEA709.1-B Control Register 6 #define UART1_PCTH (KINETISK_UART1.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High #define UART1_PCTL (KINETISK_UART1.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low #define UART1_B1T (KINETISK_UART1.B1T) // UART CEA709.1-B Beta1 Timer #define UART1_SDTH (KINETISK_UART1.SDTH) // UART CEA709.1-B Secondary Delay Timer High #define UART1_SDTL (KINETISK_UART1.SDTL) // UART CEA709.1-B Secondary Delay Timer Low #define UART1_PRE (KINETISK_UART1.PRE) // UART CEA709.1-B Preamble #define UART1_TPL (KINETISK_UART1.TPL) // UART CEA709.1-B Transmit Packet Length #define UART1_IE (KINETISK_UART1.IE) // UART CEA709.1-B Interrupt Enable Register #define UART1_WB (KINETISK_UART1.WB) // UART CEA709.1-B WBASE #define UART1_S3 (KINETISK_UART1.S3) // UART CEA709.1-B Status Register #define UART1_S4 (KINETISK_UART1.S4) // UART CEA709.1-B Status Register #define UART1_RPL (KINETISK_UART1.RPL) // UART CEA709.1-B Received Packet Length #define UART1_RPREL (KINETISK_UART1.RPREL) // UART CEA709.1-B Received Preamble Length #define UART1_CPW (KINETISK_UART1.CPW) // UART CEA709.1-B Collision Pulse Width #define UART1_RIDT (KINETISK_UART1.RIDT) // UART CEA709.1-B Receive Indeterminate Time #define UART1_TIDT (KINETISK_UART1.TIDT) // UART CEA709.1-B Transmit Indeterminate Time #define KINETISK_UART2 (*(KINETISK_UART_t *)0x4006C000) #define UART2_BDH (KINETISK_UART2.BDH) // UART Baud Rate Registers: High #define UART2_BDL (KINETISK_UART2.BDL) // UART Baud Rate Registers: Low #define UART2_C1 (KINETISK_UART2.C1) // UART Control Register 1 #define UART2_C2 (KINETISK_UART2.C2) // UART Control Register 2 #define UART2_S1 (KINETISK_UART2.S1) // UART Status Register 1 #define UART2_S2 (KINETISK_UART2.S2) // UART Status Register 2 #define UART2_C3 (KINETISK_UART2.C3) // UART Control Register 3 #define UART2_D (KINETISK_UART2.D) // UART Data Register #define UART2_MA1 (KINETISK_UART2.MA1) // UART Match Address Registers 1 #define UART2_MA2 (KINETISK_UART2.MA2) // UART Match Address Registers 2 #define UART2_C4 (KINETISK_UART2.C4) // UART Control Register 4 #define UART2_C5 (KINETISK_UART2.C5) // UART Control Register 5 #define UART2_ED (KINETISK_UART2.ED) // UART Extended Data Register #define UART2_MODEM (KINETISK_UART2.MODEM) // UART Modem Register #define UART2_IR (KINETISK_UART2.IR) // UART Infrared Register #define UART2_PFIFO (KINETISK_UART2.PFIFO) // UART FIFO Parameters #define UART2_CFIFO (KINETISK_UART2.CFIFO) // UART FIFO Control Register #define UART2_SFIFO (KINETISK_UART2.SFIFO) // UART FIFO Status Register #define UART2_TWFIFO (KINETISK_UART2.TWFIFO) // UART FIFO Transmit Watermark #define UART2_TCFIFO (KINETISK_UART2.TCFIFO) // UART FIFO Transmit Count #define UART2_RWFIFO (KINETISK_UART2.RWFIFO) // UART FIFO Receive Watermark #define UART2_RCFIFO (KINETISK_UART2.RCFIFO) // UART FIFO Receive Count #define UART2_C7816 (KINETISK_UART2.C7816) // UART 7816 Control Register #define UART2_IE7816 (KINETISK_UART2.IE7816) // UART 7816 Interrupt Enable Register #define UART2_IS7816 (KINETISK_UART2.IS7816) // UART 7816 Interrupt Status Register #define UART2_WP7816T0 (KINETISK_UART2.WP7816T0)// UART 7816 Wait Parameter Register #define UART2_WP7816T1 (KINETISK_UART2.WP7816T1)// UART 7816 Wait Parameter Register #define UART2_WN7816 (KINETISK_UART2.WN7816) // UART 7816 Wait N Register #define UART2_WF7816 (KINETISK_UART2.WF7816) // UART 7816 Wait FD Register #define UART2_ET7816 (KINETISK_UART2.ET7816) // UART 7816 Error Threshold Register #define UART2_TL7816 (KINETISK_UART2.TL7816) // UART 7816 Transmit Length Register #define UART2_C6 (KINETISK_UART2.C6) // UART CEA709.1-B Control Register 6 #define UART2_PCTH (KINETISK_UART2.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High #define UART2_PCTL (KINETISK_UART2.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low #define UART2_B1T (KINETISK_UART2.B1T) // UART CEA709.1-B Beta1 Timer #define UART2_SDTH (KINETISK_UART2.SDTH) // UART CEA709.1-B Secondary Delay Timer High #define UART2_SDTL (KINETISK_UART2.SDTL) // UART CEA709.1-B Secondary Delay Timer Low #define UART2_PRE (KINETISK_UART2.PRE) // UART CEA709.1-B Preamble #define UART2_TPL (KINETISK_UART2.TPL) // UART CEA709.1-B Transmit Packet Length #define UART2_IE (KINETISK_UART2.IE) // UART CEA709.1-B Interrupt Enable Register #define UART2_WB (KINETISK_UART2.WB) // UART CEA709.1-B WBASE #define UART2_S3 (KINETISK_UART2.S3) // UART CEA709.1-B Status Register #define UART2_S4 (KINETISK_UART2.S4) // UART CEA709.1-B Status Register #define UART2_RPL (KINETISK_UART2.RPL) // UART CEA709.1-B Received Packet Length #define UART2_RPREL (KINETISK_UART2.RPREL) // UART CEA709.1-B Received Preamble Length #define UART2_CPW (KINETISK_UART2.CPW) // UART CEA709.1-B Collision Pulse Width #define UART2_RIDT (KINETISK_UART2.RIDT) // UART CEA709.1-B Receive Indeterminate Time #define UART2_TIDT (KINETISK_UART2.TIDT) // UART CEA709.1-B Transmit Indeterminate Time // Chapter 46: Synchronous Audio Interface (SAI) #define I2S0_TCSR (*(volatile uint32_t *)0x4002F000) // SAI Transmit Control Register #define I2S_TCSR_TE ((uint32_t)0x80000000) // Transmitter Enable #define I2S_TCSR_STOPE ((uint32_t)0x40000000) // Transmitter Enable in Stop mode #define I2S_TCSR_DBGE ((uint32_t)0x20000000) // Transmitter Enable in Debug mode #define I2S_TCSR_BCE ((uint32_t)0x10000000) // Bit Clock Enable #define I2S_TCSR_FR ((uint32_t)0x02000000) // FIFO Reset #define I2S_TCSR_SR ((uint32_t)0x01000000) // Software Reset #define I2S_TCSR_WSF ((uint32_t)0x00100000) // Word Start Flag #define I2S_TCSR_SEF ((uint32_t)0x00080000) // Sync Error Flag #define I2S_TCSR_FEF ((uint32_t)0x00040000) // FIFO Error Flag (underrun) #define I2S_TCSR_FWF ((uint32_t)0x00020000) // FIFO Warning Flag (empty) #define I2S_TCSR_FRF ((uint32_t)0x00010000) // FIFO Request Flag (Data Ready) #define I2S_TCSR_WSIE ((uint32_t)0x00001000) // Word Start Interrupt Enable #define I2S_TCSR_SEIE ((uint32_t)0x00000800) // Sync Error Interrupt Enable #define I2S_TCSR_FEIE ((uint32_t)0x00000400) // FIFO Error Interrupt Enable #define I2S_TCSR_FWIE ((uint32_t)0x00000200) // FIFO Warning Interrupt Enable #define I2S_TCSR_FRIE ((uint32_t)0x00000100) // FIFO Request Interrupt Enable #define I2S_TCSR_FWDE ((uint32_t)0x00000002) // FIFO Warning DMA Enable #define I2S_TCSR_FRDE ((uint32_t)0x00000001) // FIFO Request DMA Enable #define I2S0_TCR1 (*(volatile uint32_t *)0x4002F004) // SAI Transmit Configuration 1 Register #define I2S_TCR1_TFW(n) ((uint32_t)n & 0x03) // Transmit FIFO watermark #define I2S0_TCR2 (*(volatile uint32_t *)0x4002F008) // SAI Transmit Configuration 2 Register #define I2S_TCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2 #define I2S_TCR2_BCD ((uint32_t)1<<24) // Bit clock direction #define I2S_TCR2_BCP ((uint32_t)1<<25) // Bit clock polarity #define I2S_TCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK #define I2S_TCR2_BCI ((uint32_t)1<<28) // Bit clock input #define I2S_TCR2_BCS ((uint32_t)1<<29) // Bit clock swap #define I2S_TCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver #define I2S0_TCR3 (*(volatile uint32_t *)0x4002F00C) // SAI Transmit Configuration 3 Register #define I2S_TCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration #define I2S_TCR3_TCE ((uint32_t)0x10000) // transmit channel enable #define I2S0_TCR4 (*(volatile uint32_t *)0x4002F010) // SAI Transmit Configuration 4 Register #define I2S_TCR4_FSD ((uint32_t)1) // Frame Sync Direction #define I2S_TCR4_FSP ((uint32_t)2) // Frame Sync Polarity #define I2S_TCR4_FSE ((uint32_t)8) // Frame Sync Early #define I2S_TCR4_MF ((uint32_t)0x10) // MSB First #define I2S_TCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width #define I2S_TCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size #define I2S0_TCR5 (*(volatile uint32_t *)0x4002F014) // SAI Transmit Configuration 5 Register #define I2S_TCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted #define I2S_TCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width #define I2S_TCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width #define I2S0_TDR0 (*(volatile uint32_t *)0x4002F020) // SAI Transmit Data Register #define I2S0_TDR1 (*(volatile uint32_t *)0x4002F024) // SAI Transmit Data Register #define I2S0_TFR0 (*(volatile uint32_t *)0x4002F040) // SAI Transmit FIFO Register #define I2S0_TFR1 (*(volatile uint32_t *)0x4002F044) // SAI Transmit FIFO Register #define I2S_TFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer #define I2S_TFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer #define I2S0_TMR (*(volatile uint32_t *)0x4002F060) // SAI Transmit Mask Register #define I2S_TMR_TWM(n) ((uint32_t)n & 0xFFFFFFFF) // #define I2S0_RCSR (*(volatile uint32_t *)0x4002F080) // SAI Receive Control Register #define I2S_RCSR_RE ((uint32_t)0x80000000) // Receiver Enable #define I2S_RCSR_STOPE ((uint32_t)0x40000000) // Receiver Enable in Stop mode #define I2S_RCSR_DBGE ((uint32_t)0x20000000) // Receiver Enable in Debug mode #define I2S_RCSR_BCE ((uint32_t)0x10000000) // Bit Clock Enable #define I2S_RCSR_FR ((uint32_t)0x02000000) // FIFO Reset #define I2S_RCSR_SR ((uint32_t)0x01000000) // Software Reset #define I2S_RCSR_WSF ((uint32_t)0x00100000) // Word Start Flag #define I2S_RCSR_SEF ((uint32_t)0x00080000) // Sync Error Flag #define I2S_RCSR_FEF ((uint32_t)0x00040000) // FIFO Error Flag (underrun) #define I2S_RCSR_FWF ((uint32_t)0x00020000) // FIFO Warning Flag (empty) #define I2S_RCSR_FRF ((uint32_t)0x00010000) // FIFO Request Flag (Data Ready) #define I2S_RCSR_WSIE ((uint32_t)0x00001000) // Word Start Interrupt Enable #define I2S_RCSR_SEIE ((uint32_t)0x00000800) // Sync Error Interrupt Enable #define I2S_RCSR_FEIE ((uint32_t)0x00000400) // FIFO Error Interrupt Enable #define I2S_RCSR_FWIE ((uint32_t)0x00000200) // FIFO Warning Interrupt Enable #define I2S_RCSR_FRIE ((uint32_t)0x00000100) // FIFO Request Interrupt Enable #define I2S_RCSR_FWDE ((uint32_t)0x00000002) // FIFO Warning DMA Enable #define I2S_RCSR_FRDE ((uint32_t)0x00000001) // FIFO Request DMA Enable #define I2S0_RCR1 (*(volatile uint32_t *)0x4002F084) // SAI Receive Configuration 1 Register #define I2S_RCR1_RFW(n) ((uint32_t)n & 0x03) // Receive FIFO watermark #define I2S0_RCR2 (*(volatile uint32_t *)0x4002F088) // SAI Receive Configuration 2 Register #define I2S_RCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2 #define I2S_RCR2_BCD ((uint32_t)1<<24) // Bit clock direction #define I2S_RCR2_BCP ((uint32_t)1<<25) // Bit clock polarity #define I2S_RCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK #define I2S_RCR2_BCI ((uint32_t)1<<28) // Bit clock input #define I2S_RCR2_BCS ((uint32_t)1<<29) // Bit clock swap #define I2S_RCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver #define I2S0_RCR3 (*(volatile uint32_t *)0x4002F08C) // SAI Receive Configuration 3 Register #define I2S_RCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration #define I2S_RCR3_RCE ((uint32_t)0x10000) // receive channel enable #define I2S0_RCR4 (*(volatile uint32_t *)0x4002F090) // SAI Receive Configuration 4 Register #define I2S_RCR4_FSD ((uint32_t)1) // Frame Sync Direction #define I2S_RCR4_FSP ((uint32_t)2) // Frame Sync Polarity #define I2S_RCR4_FSE ((uint32_t)8) // Frame Sync Early #define I2S_RCR4_MF ((uint32_t)0x10) // MSB First #define I2S_RCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width #define I2S_RCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size #define I2S0_RCR5 (*(volatile uint32_t *)0x4002F094) // SAI Receive Configuration 5 Register #define I2S_RCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted #define I2S_RCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width #define I2S_RCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width #define I2S0_RDR0 (*(volatile uint32_t *)0x4002F0A0) // SAI Receive Data Register #define I2S0_RDR1 (*(volatile uint32_t *)0x4002F0A4) // SAI Receive Data Register #define I2S0_RFR0 (*(volatile uint32_t *)0x4002F0C0) // SAI Receive FIFO Register #define I2S0_RFR1 (*(volatile uint32_t *)0x4002F0C4) // SAI Receive FIFO Register #define I2S_RFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer #define I2S_RFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer #define I2S0_RMR (*(volatile uint32_t *)0x4002F0E0) // SAI Receive Mask Register #define I2S_RMR_RWM(n) ((uint32_t)n & 0xFFFFFFFF) // #define I2S0_MCR (*(volatile uint32_t *)0x4002F100) // SAI MCLK Control Register #define I2S_MCR_DUF ((uint32_t)1<<31) // Divider Update Flag #define I2S_MCR_MOE ((uint32_t)1<<30) // MCLK Output Enable #define I2S_MCR_MICS(n) ((uint32_t)(n & 3)<<24) // MCLK Input Clock Select #define I2S0_MDR (*(volatile uint32_t *)0x4002F104) // SAI MCLK Divide Register #define I2S_MDR_FRACT(n) ((uint32_t)(n & 0xff)<<12) // MCLK Fraction #define I2S_MDR_DIVIDE(n) ((uint32_t)(n & 0xfff)) // MCLK Divide // Chapter 47: General-Purpose Input/Output (GPIO) #define GPIOA_PDOR (*(volatile uint32_t *)0x400FF000) // Port Data Output Register #define GPIOA_PSOR (*(volatile uint32_t *)0x400FF004) // Port Set Output Register #define GPIOA_PCOR (*(volatile uint32_t *)0x400FF008) // Port Clear Output Register #define GPIOA_PTOR (*(volatile uint32_t *)0x400FF00C) // Port Toggle Output Register #define GPIOA_PDIR (*(volatile uint32_t *)0x400FF010) // Port Data Input Register #define GPIOA_PDDR (*(volatile uint32_t *)0x400FF014) // Port Data Direction Register #define GPIOB_PDOR (*(volatile uint32_t *)0x400FF040) // Port Data Output Register #define GPIOB_PSOR (*(volatile uint32_t *)0x400FF044) // Port Set Output Register #define GPIOB_PCOR (*(volatile uint32_t *)0x400FF048) // Port Clear Output Register #define GPIOB_PTOR (*(volatile uint32_t *)0x400FF04C) // Port Toggle Output Register #define GPIOB_PDIR (*(volatile uint32_t *)0x400FF050) // Port Data Input Register #define GPIOB_PDDR (*(volatile uint32_t *)0x400FF054) // Port Data Direction Register #define GPIOC_PDOR (*(volatile uint32_t *)0x400FF080) // Port Data Output Register #define GPIOC_PSOR (*(volatile uint32_t *)0x400FF084) // Port Set Output Register #define GPIOC_PCOR (*(volatile uint32_t *)0x400FF088) // Port Clear Output Register #define GPIOC_PTOR (*(volatile uint32_t *)0x400FF08C) // Port Toggle Output Register #define GPIOC_PDIR (*(volatile uint32_t *)0x400FF090) // Port Data Input Register #define GPIOC_PDDR (*(volatile uint32_t *)0x400FF094) // Port Data Direction Register #define GPIOD_PDOR (*(volatile uint32_t *)0x400FF0C0) // Port Data Output Register #define GPIOD_PSOR (*(volatile uint32_t *)0x400FF0C4) // Port Set Output Register #define GPIOD_PCOR (*(volatile uint32_t *)0x400FF0C8) // Port Clear Output Register #define GPIOD_PTOR (*(volatile uint32_t *)0x400FF0CC) // Port Toggle Output Register #define GPIOD_PDIR (*(volatile uint32_t *)0x400FF0D0) // Port Data Input Register #define GPIOD_PDDR (*(volatile uint32_t *)0x400FF0D4) // Port Data Direction Register #define GPIOE_PDOR (*(volatile uint32_t *)0x400FF100) // Port Data Output Register #define GPIOE_PSOR (*(volatile uint32_t *)0x400FF104) // Port Set Output Register #define GPIOE_PCOR (*(volatile uint32_t *)0x400FF108) // Port Clear Output Register #define GPIOE_PTOR (*(volatile uint32_t *)0x400FF10C) // Port Toggle Output Register #define GPIOE_PDIR (*(volatile uint32_t *)0x400FF110) // Port Data Input Register #define GPIOE_PDDR (*(volatile uint32_t *)0x400FF114) // Port Data Direction Register #if defined(KINETISL) #define FGPIOA_PDOR (*(volatile uint32_t *)0xF8000000) // Port Data Output Register #define FGPIOA_PSOR (*(volatile uint32_t *)0xF8000004) // Port Set Output Register #define FGPIOA_PCOR (*(volatile uint32_t *)0xF8000008) // Port Clear Output Register #define FGPIOA_PTOR (*(volatile uint32_t *)0xF800000C) // Port Toggle Output Register #define FGPIOA_PDIR (*(volatile uint32_t *)0xF8000010) // Port Data Input Register #define FGPIOA_PDDR (*(volatile uint32_t *)0xF8000014) // Port Data Direction Register #define FGPIOB_PDOR (*(volatile uint32_t *)0xF8000040) // Port Data Output Register #define FGPIOB_PSOR (*(volatile uint32_t *)0xF8000044) // Port Set Output Register #define FGPIOB_PCOR (*(volatile uint32_t *)0xF8000048) // Port Clear Output Register #define FGPIOB_PTOR (*(volatile uint32_t *)0xF800004C) // Port Toggle Output Register #define FGPIOB_PDIR (*(volatile uint32_t *)0xF8000050) // Port Data Input Register #define FGPIOB_PDDR (*(volatile uint32_t *)0xF8000054) // Port Data Direction Register #define FGPIOC_PDOR (*(volatile uint32_t *)0xF8000080) // Port Data Output Register #define FGPIOC_PSOR (*(volatile uint32_t *)0xF8000084) // Port Set Output Register #define FGPIOC_PCOR (*(volatile uint32_t *)0xF8000088) // Port Clear Output Register #define FGPIOC_PTOR (*(volatile uint32_t *)0xF800008C) // Port Toggle Output Register #define FGPIOC_PDIR (*(volatile uint32_t *)0xF8000090) // Port Data Input Register #define FGPIOC_PDDR (*(volatile uint32_t *)0xF8000094) // Port Data Direction Register #define FGPIOD_PDOR (*(volatile uint32_t *)0xF80000C0) // Port Data Output Register #define FGPIOD_PSOR (*(volatile uint32_t *)0xF80000C4) // Port Set Output Register #define FGPIOD_PCOR (*(volatile uint32_t *)0xF80000C8) // Port Clear Output Register #define FGPIOD_PTOR (*(volatile uint32_t *)0xF80000CC) // Port Toggle Output Register #define FGPIOD_PDIR (*(volatile uint32_t *)0xF80000D0) // Port Data Input Register #define FGPIOD_PDDR (*(volatile uint32_t *)0xF80000D4) // Port Data Direction Register #define FGPIOE_PDOR (*(volatile uint32_t *)0xF8000100) // Port Data Output Register #define FGPIOE_PSOR (*(volatile uint32_t *)0xF8000104) // Port Set Output Register #define FGPIOE_PCOR (*(volatile uint32_t *)0xF8000108) // Port Clear Output Register #define FGPIOE_PTOR (*(volatile uint32_t *)0xF800010C) // Port Toggle Output Register #define FGPIOE_PDIR (*(volatile uint32_t *)0xF8000110) // Port Data Input Register #define FGPIOE_PDDR (*(volatile uint32_t *)0xF8000114) // Port Data Direction Register #endif // Chapter 48: Touch sense input (TSI) #if defined(KINETISK) #define TSI0_GENCS (*(volatile uint32_t *)0x40045000) // General Control and Status Register #define TSI_GENCS_LPCLKS ((uint32_t)0x10000000) // #define TSI_GENCS_LPSCNITV(n) (((n) & 15) << 24) // #define TSI_GENCS_NSCN(n) (((n) & 31) << 19) // #define TSI_GENCS_PS(n) (((n) & 7) << 16) // #define TSI_GENCS_EOSF ((uint32_t)0x00008000) // #define TSI_GENCS_OUTRGF ((uint32_t)0x00004000) // #define TSI_GENCS_EXTERF ((uint32_t)0x00002000) // #define TSI_GENCS_OVRF ((uint32_t)0x00001000) // #define TSI_GENCS_SCNIP ((uint32_t)0x00000200) // #define TSI_GENCS_SWTS ((uint32_t)0x00000100) // #define TSI_GENCS_TSIEN ((uint32_t)0x00000080) // #define TSI_GENCS_TSIIE ((uint32_t)0x00000040) // #define TSI_GENCS_ERIE ((uint32_t)0x00000020) // #define TSI_GENCS_ESOR ((uint32_t)0x00000010) // #define TSI_GENCS_STM ((uint32_t)0x00000002) // #define TSI_GENCS_STPE ((uint32_t)0x00000001) // #define TSI0_SCANC (*(volatile uint32_t *)0x40045004) // SCAN Control Register #define TSI_SCANC_REFCHRG(n) (((n) & 15) << 24) // #define TSI_SCANC_EXTCHRG(n) (((n) & 7) << 16) // #define TSI_SCANC_SMOD(n) (((n) & 255) << 8) // #define TSI_SCANC_AMCLKS(n) (((n) & 3) << 3) // #define TSI_SCANC_AMPSC(n) (((n) & 7) << 0) // #define TSI0_PEN (*(volatile uint32_t *)0x40045008) // Pin Enable Register #define TSI0_WUCNTR (*(volatile uint32_t *)0x4004500C) // Wake-Up Channel Counter Register #define TSI0_CNTR1 (*(volatile uint32_t *)0x40045100) // Counter Register #define TSI0_CNTR3 (*(volatile uint32_t *)0x40045104) // Counter Register #define TSI0_CNTR5 (*(volatile uint32_t *)0x40045108) // Counter Register #define TSI0_CNTR7 (*(volatile uint32_t *)0x4004510C) // Counter Register #define TSI0_CNTR9 (*(volatile uint32_t *)0x40045110) // Counter Register #define TSI0_CNTR11 (*(volatile uint32_t *)0x40045114) // Counter Register #define TSI0_CNTR13 (*(volatile uint32_t *)0x40045118) // Counter Register #define TSI0_CNTR15 (*(volatile uint32_t *)0x4004511C) // Counter Register #define TSI0_THRESHOLD (*(volatile uint32_t *)0x40045120) // Low Power Channel Threshold Register #elif defined(KINETISL) #define TSI0_GENCS (*(volatile uint32_t *)0x40045000) // General Control and Status #define TSI_GENCS_OUTRGF ((uint32_t)0x80000000) // Out of Range Flag #define TSI_GENCS_ESOR ((uint32_t)0x10000000) // End-of-scan or Out-of-Range Interrupt Selection #define TSI_GENCS_MODE(n) (((n) & 15) << 24) // analog modes & status #define TSI_GENCS_REFCHRG(n) (((n) & 7) << 21) // reference charge and discharge current #define TSI_GENCS_DVOLT(n) (((n) & 3) << 19) // voltage rails #define TSI_GENCS_EXTCHRG(n) (((n) & 7) << 16) // electrode charge and discharge current #define TSI_GENCS_PS(n) (((n) & 7) << 13) // prescaler #define TSI_GENCS_NSCN(n) (((n) & 31) << 8) // scan number #define TSI_GENCS_TSIEN ((uint32_t)0x00000080) // Enable #define TSI_GENCS_TSIIEN ((uint32_t)0x00000040) // Interrupt Enable #define TSI_GENCS_STPE ((uint32_t)0x00000020) // STOP Enable #define TSI_GENCS_STM ((uint32_t)0x00000010) // Trigger Mode #define TSI_GENCS_SCNIP ((uint32_t)0x00000008) // Scan In Progress Status #define TSI_GENCS_EOSF ((uint32_t)0x00000004) // End of Scan Flag #define TSI_GENCS_CURSW ((uint32_t)0x00000002) // current sources swapped #define TSI0_DATA (*(volatile uint32_t *)0x40045004) // Data #define TSI_DATA_TSICH(n) (((n) & 15) << 28) // channel #define TSI_DATA_DMAEN ((uint32_t)0x00800000) // DMA Transfer Enabled #define TSI_DATA_SWTS ((uint32_t)0x00400000) // Software Trigger Start #define TSI_DATA_TSICNT(n) (((n) & 65535) << 0) // Conversion Counter Value #define TSI0_TSHD (*(volatile uint32_t *)0x40045008) // Threshold #define TSI_TSHD_THRESH(n) (((n) & 65535) << 16) // High wakeup threshold #define TSI_TSHD_THRESL(n) (((n) & 65535) << 0) // Low wakeup threshold #endif // Nested Vectored Interrupt Controller, Table 3-4 & ARMv7 ref, appendix B3.4 (page 750) #define NVIC_STIR (*(volatile uint32_t *)0xE000EF00) #define NVIC_ENABLE_IRQ(n) (*((volatile uint32_t *)0xE000E100 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_DISABLE_IRQ(n) (*((volatile uint32_t *)0xE000E180 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_SET_PENDING(n) (*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_CLEAR_PENDING(n) (*((volatile uint32_t *)0xE000E280 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_IS_PENDING(n) (*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) & (1 << ((n) & 31))) #define NVIC_IS_ACTIVE(n) (*((volatile uint32_t *)0xE000E300 + ((n) >> 5)) & (1 << ((n) & 31))) #define NVIC_TRIGGER_IRQ(n) NVIC_STIR=(n) #define NVIC_ISER0 (*(volatile uint32_t *)0xE000E100) #define NVIC_ISER1 (*(volatile uint32_t *)0xE000E104) #define NVIC_ISER2 (*(volatile uint32_t *)0xE000E108) #define NVIC_ISER3 (*(volatile uint32_t *)0xE000E10C) #define NVIC_ICER0 (*(volatile uint32_t *)0xE000E180) #define NVIC_ICER1 (*(volatile uint32_t *)0xE000E184) #define NVIC_ICER2 (*(volatile uint32_t *)0xE000E188) #define NVIC_ICER3 (*(volatile uint32_t *)0xE000E18C) // 0 = highest priority // Cortex-M4: 0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240 // Cortex-M0: 0,64,128,192 #ifdef KINETISK #define NVIC_SET_PRIORITY(irqnum, priority) (*((volatile uint8_t *)0xE000E400 + (irqnum)) = (uint8_t)(priority)) #define NVIC_GET_PRIORITY(irqnum) (*((uint8_t *)0xE000E400 + (irqnum))) #else #define NVIC_SET_PRIORITY(irqnum, priority) (*((uint32_t *)0xE000E400 + ((irqnum) >> 2)) = (*((uint32_t *)0xE000E400 + ((irqnum) >> 2)) & (~(0xFF << (8 * ((irqnum) & 3))))) | (((priority) & 0xFF) << (8 * ((irqnum) & 3)))) #define NVIC_GET_PRIORITY(irqnum) (*((uint32_t *)0xE000E400 + ((irqnum) >> 2)) >> (8 * ((irqnum) & 3)) & 255) #endif #define __disable_irq() __asm__ volatile("CPSID i"); #define __enable_irq() __asm__ volatile("CPSIE i"); // System Control Space (SCS), ARMv7 ref manual, B3.2, page 708 #define SCB_CPUID (*(const uint32_t *)0xE000ED00) // CPUID Base Register #define SCB_ICSR (*(volatile uint32_t *)0xE000ED04) // Interrupt Control and State #define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) #define SCB_VTOR (*(volatile uint32_t *)0xE000ED08) // Vector Table Offset #define SCB_AIRCR (*(volatile uint32_t *)0xE000ED0C) // Application Interrupt and Reset Control #define SCB_SCR (*(volatile uint32_t *)0xE000ED10) // System Control Register #define SCB_CCR (*(volatile uint32_t *)0xE000ED14) // Configuration and Control #define SCB_SHPR1 (*(volatile uint32_t *)0xE000ED18) // System Handler Priority Register 1 #define SCB_SHPR2 (*(volatile uint32_t *)0xE000ED1C) // System Handler Priority Register 2 #define SCB_SHPR3 (*(volatile uint32_t *)0xE000ED20) // System Handler Priority Register 3 #define SCB_SHCSR (*(volatile uint32_t *)0xE000ED24) // System Handler Control and State #define SCB_CFSR (*(volatile uint32_t *)0xE000ED28) // Configurable Fault Status Register #define SCB_HFSR (*(volatile uint32_t *)0xE000ED2C) // HardFault Status #define SCB_DFSR (*(volatile uint32_t *)0xE000ED30) // Debug Fault Status #define SCB_MMFAR (*(volatile uint32_t *)0xE000ED34) // MemManage Fault Address #define SYST_CSR (*(volatile uint32_t *)0xE000E010) // SysTick Control and Status #define SYST_CSR_COUNTFLAG ((uint32_t)0x00010000) #define SYST_CSR_CLKSOURCE ((uint32_t)0x00000004) #define SYST_CSR_TICKINT ((uint32_t)0x00000002) #define SYST_CSR_ENABLE ((uint32_t)0x00000001) #define SYST_RVR (*(volatile uint32_t *)0xE000E014) // SysTick Reload Value Register #define SYST_CVR (*(volatile uint32_t *)0xE000E018) // SysTick Current Value Register #define SYST_CALIB (*(const uint32_t *)0xE000E01C) // SysTick Calibration Value #define ARM_DEMCR (*(volatile uint32_t *)0xE000EDFC) // Debug Exception and Monitor Control #define ARM_DEMCR_TRCENA (1 << 24) // Enable debugging & monitoring blocks #define ARM_DWT_CTRL (*(volatile uint32_t *)0xE0001000) // DWT control register #define ARM_DWT_CTRL_CYCCNTENA (1 << 0) // Enable cycle count #define ARM_DWT_CYCCNT (*(volatile uint32_t *)0xE0001004) // Cycle count register #ifdef __cplusplus extern "C" { #endif extern int nvic_execution_priority(void); extern void nmi_isr(void); extern void hard_fault_isr(void); extern void memmanage_fault_isr(void); extern void bus_fault_isr(void); extern void usage_fault_isr(void); extern void svcall_isr(void); extern void debugmonitor_isr(void); extern void pendablesrvreq_isr(void); extern void systick_isr(void); extern void dma_ch0_isr(void); extern void dma_ch1_isr(void); extern void dma_ch2_isr(void); extern void dma_ch3_isr(void); extern void dma_ch4_isr(void); extern void dma_ch5_isr(void); extern void dma_ch6_isr(void); extern void dma_ch7_isr(void); extern void dma_ch8_isr(void); extern void dma_ch9_isr(void); extern void dma_ch10_isr(void); extern void dma_ch11_isr(void); extern void dma_ch12_isr(void); extern void dma_ch13_isr(void); extern void dma_ch14_isr(void); extern void dma_ch15_isr(void); extern void dma_error_isr(void); extern void mcm_isr(void); extern void flash_cmd_isr(void); extern void flash_error_isr(void); extern void low_voltage_isr(void); extern void wakeup_isr(void); extern void watchdog_isr(void); extern void i2c0_isr(void); extern void i2c1_isr(void); extern void i2c2_isr(void); extern void spi0_isr(void); extern void spi1_isr(void); extern void spi2_isr(void); extern void sdhc_isr(void); extern void can0_message_isr(void); extern void can0_bus_off_isr(void); extern void can0_error_isr(void); extern void can0_tx_warn_isr(void); extern void can0_rx_warn_isr(void); extern void can0_wakeup_isr(void); extern void i2s0_tx_isr(void); extern void i2s0_rx_isr(void); extern void i2s0_isr(void); extern void uart0_lon_isr(void); extern void uart0_status_isr(void); extern void uart0_error_isr(void); extern void uart1_status_isr(void); extern void uart1_error_isr(void); extern void uart2_status_isr(void); extern void uart2_error_isr(void); extern void uart3_status_isr(void); extern void uart3_error_isr(void); extern void uart4_status_isr(void); extern void uart4_error_isr(void); extern void uart5_status_isr(void); extern void uart5_error_isr(void); extern void adc0_isr(void); extern void adc1_isr(void); extern void cmp0_isr(void); extern void cmp1_isr(void); extern void cmp2_isr(void); extern void ftm0_isr(void); extern void ftm1_isr(void); extern void ftm2_isr(void); extern void ftm3_isr(void); extern void cmt_isr(void); extern void rtc_alarm_isr(void); extern void rtc_seconds_isr(void); extern void pit0_isr(void); extern void pit1_isr(void); extern void pit2_isr(void); extern void pit3_isr(void); extern void pit_isr(void); extern void pdb_isr(void); extern void usb_isr(void); extern void usb_charge_isr(void); extern void dac0_isr(void); extern void dac1_isr(void); extern void tsi0_isr(void); extern void mcg_isr(void); extern void lptmr_isr(void); extern void porta_isr(void); extern void portb_isr(void); extern void portc_isr(void); extern void portd_isr(void); extern void porte_isr(void); extern void portcd_isr(void); extern void software_isr(void); extern void (* _VectorsRam[NVIC_NUM_INTERRUPTS+16])(void); extern void (* const _VectorsFlash[NVIC_NUM_INTERRUPTS+16])(void); #ifdef __cplusplus } #endif #undef BEGIN_ENUM #undef END_ENUM #endif