/* Teensyduino Core Library * http://www.pjrc.com/teensy/ * Copyright (c) 2013 PJRC.COM, LLC. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * 1. The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * 2. If the Software is incorporated into a build system that allows * selection among a list of target devices, then similar target * devices manufactured by PJRC.COM must be included in the list of * target devices and selectable in the same manner. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _kinetis_h_ #define _kinetis_h_ #include // Teensy 3.0 #if defined(__MK20DX128__) enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_DMA_ERROR = 4, IRQ_FTFL_COMPLETE = 6, IRQ_FTFL_COLLISION = 7, IRQ_LOW_VOLTAGE = 8, IRQ_LLWU = 9, IRQ_WDOG = 10, IRQ_I2C0 = 11, IRQ_SPI0 = 12, IRQ_I2S0_TX = 13, IRQ_I2S0_RX = 14, IRQ_UART0_LON = 15, IRQ_UART0_STATUS = 16, IRQ_UART0_ERROR = 17, IRQ_UART1_STATUS = 18, IRQ_UART1_ERROR = 19, IRQ_UART2_STATUS = 20, IRQ_UART2_ERROR = 21, IRQ_ADC0 = 22, IRQ_CMP0 = 23, IRQ_CMP1 = 24, IRQ_FTM0 = 25, IRQ_FTM1 = 26, IRQ_CMT = 27, IRQ_RTC_ALARM = 28, IRQ_RTC_SECOND = 29, IRQ_PIT_CH0 = 30, IRQ_PIT_CH1 = 31, IRQ_PIT_CH2 = 32, IRQ_PIT_CH3 = 33, IRQ_PDB = 34, IRQ_USBOTG = 35, IRQ_USBDCD = 36, IRQ_TSI = 37, IRQ_MCG = 38, IRQ_LPTMR = 39, IRQ_PORTA = 40, IRQ_PORTB = 41, IRQ_PORTC = 42, IRQ_PORTD = 43, IRQ_PORTE = 44, IRQ_SOFTWARE = 45 }; #define NVIC_NUM_INTERRUPTS 46 #define DMA_NUM_CHANNELS 4 #define DMAMUX_SOURCE_UART0_RX 2 #define DMAMUX_SOURCE_UART0_TX 3 #define DMAMUX_SOURCE_UART1_RX 4 #define DMAMUX_SOURCE_UART1_TX 5 #define DMAMUX_SOURCE_UART2_RX 6 #define DMAMUX_SOURCE_UART2_TX 7 #define DMAMUX_SOURCE_I2S0_RX 14 #define DMAMUX_SOURCE_I2S0_TX 15 #define DMAMUX_SOURCE_SPI0_RX 16 #define DMAMUX_SOURCE_SPI0_TX 17 #define DMAMUX_SOURCE_I2C0 22 #define DMAMUX_SOURCE_FTM0_CH0 24 #define DMAMUX_SOURCE_FTM0_CH1 25 #define DMAMUX_SOURCE_FTM0_CH2 26 #define DMAMUX_SOURCE_FTM0_CH3 27 #define DMAMUX_SOURCE_FTM0_CH4 28 #define DMAMUX_SOURCE_FTM0_CH5 29 #define DMAMUX_SOURCE_FTM0_CH6 30 #define DMAMUX_SOURCE_FTM0_CH7 31 #define DMAMUX_SOURCE_FTM1_CH0 32 #define DMAMUX_SOURCE_FTM1_CH1 33 #define DMAMUX_SOURCE_ADC0 40 #define DMAMUX_SOURCE_CMP0 42 #define DMAMUX_SOURCE_CMP1 43 #define DMAMUX_SOURCE_DAC0 45 #define DMAMUX_SOURCE_CMT 47 #define DMAMUX_SOURCE_PDB 48 #define DMAMUX_SOURCE_PORTA 49 #define DMAMUX_SOURCE_PORTB 50 #define DMAMUX_SOURCE_PORTC 51 #define DMAMUX_SOURCE_PORTD 52 #define DMAMUX_SOURCE_PORTE 53 #define DMAMUX_SOURCE_ALWAYS0 54 #define DMAMUX_SOURCE_ALWAYS1 55 #define DMAMUX_SOURCE_ALWAYS2 56 #define DMAMUX_SOURCE_ALWAYS3 57 #define DMAMUX_SOURCE_ALWAYS4 58 #define DMAMUX_SOURCE_ALWAYS5 59 #define DMAMUX_SOURCE_ALWAYS6 60 #define DMAMUX_SOURCE_ALWAYS7 61 #define DMAMUX_SOURCE_ALWAYS8 62 #define DMAMUX_SOURCE_ALWAYS9 63 #define DMAMUX_NUM_SOURCE_ALWAYS 10 #define KINETISK #define HAS_KINETISK_UART0 #define HAS_KINETISK_UART0_FIFO #define HAS_KINETISK_UART1 #define HAS_KINETISK_UART2 #define HAS_KINETIS_I2C0 #define HAS_KINETIS_LLWU_16CH #define HAS_KINETIS_ADC0 #define HAS_KINETIS_TSI #define HAS_KINETIS_FLASH_FTFL // Teensy 3.1 & 3.2 #elif defined(__MK20DX256__) enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_DMA_CH4 = 4, IRQ_DMA_CH5 = 5, IRQ_DMA_CH6 = 6, IRQ_DMA_CH7 = 7, IRQ_DMA_CH8 = 8, IRQ_DMA_CH9 = 9, IRQ_DMA_CH10 = 10, IRQ_DMA_CH11 = 11, IRQ_DMA_CH12 = 12, IRQ_DMA_CH13 = 13, IRQ_DMA_CH14 = 14, IRQ_DMA_CH15 = 15, IRQ_DMA_ERROR = 16, IRQ_FTFL_COMPLETE = 18, IRQ_FTFL_COLLISION = 19, IRQ_LOW_VOLTAGE = 20, IRQ_LLWU = 21, IRQ_WDOG = 22, IRQ_I2C0 = 24, IRQ_I2C1 = 25, IRQ_SPI0 = 26, IRQ_SPI1 = 27, IRQ_CAN_MESSAGE = 29, IRQ_CAN_BUS_OFF = 30, IRQ_CAN_ERROR = 31, IRQ_CAN_TX_WARN = 32, IRQ_CAN_RX_WARN = 33, IRQ_CAN_WAKEUP = 34, IRQ_I2S0_TX = 35, IRQ_I2S0_RX = 36, IRQ_UART0_LON = 44, IRQ_UART0_STATUS = 45, IRQ_UART0_ERROR = 46, IRQ_UART1_STATUS = 47, IRQ_UART1_ERROR = 48, IRQ_UART2_STATUS = 49, IRQ_UART2_ERROR = 50, IRQ_ADC0 = 57, IRQ_ADC1 = 58, IRQ_CMP0 = 59, IRQ_CMP1 = 60, IRQ_CMP2 = 61, IRQ_FTM0 = 62, IRQ_FTM1 = 63, IRQ_FTM2 = 64, IRQ_CMT = 65, IRQ_RTC_ALARM = 66, IRQ_RTC_SECOND = 67, IRQ_PIT_CH0 = 68, IRQ_PIT_CH1 = 69, IRQ_PIT_CH2 = 70, IRQ_PIT_CH3 = 71, IRQ_PDB = 72, IRQ_USBOTG = 73, IRQ_USBDCD = 74, IRQ_DAC0 = 81, IRQ_TSI = 83, IRQ_MCG = 84, IRQ_LPTMR = 85, IRQ_PORTA = 87, IRQ_PORTB = 88, IRQ_PORTC = 89, IRQ_PORTD = 90, IRQ_PORTE = 91, IRQ_SOFTWARE = 94 }; #define NVIC_NUM_INTERRUPTS 95 #define DMA_NUM_CHANNELS 16 #define DMAMUX_SOURCE_UART0_RX 2 #define DMAMUX_SOURCE_UART0_TX 3 #define DMAMUX_SOURCE_UART1_RX 4 #define DMAMUX_SOURCE_UART1_TX 5 #define DMAMUX_SOURCE_UART2_RX 6 #define DMAMUX_SOURCE_UART2_TX 7 #define DMAMUX_SOURCE_I2S0_RX 14 #define DMAMUX_SOURCE_I2S0_TX 15 #define DMAMUX_SOURCE_SPI0_RX 16 #define DMAMUX_SOURCE_SPI0_TX 17 #define DMAMUX_SOURCE_SPI1_RX 18 #define DMAMUX_SOURCE_SPI1_TX 19 #define DMAMUX_SOURCE_I2C0 22 #define DMAMUX_SOURCE_I2C1 23 #define DMAMUX_SOURCE_FTM0_CH0 24 #define DMAMUX_SOURCE_FTM0_CH1 25 #define DMAMUX_SOURCE_FTM0_CH2 26 #define DMAMUX_SOURCE_FTM0_CH3 27 #define DMAMUX_SOURCE_FTM0_CH4 28 #define DMAMUX_SOURCE_FTM0_CH5 29 #define DMAMUX_SOURCE_FTM0_CH6 30 #define DMAMUX_SOURCE_FTM0_CH7 31 #define DMAMUX_SOURCE_FTM1_CH0 32 #define DMAMUX_SOURCE_FTM1_CH1 33 #define DMAMUX_SOURCE_FTM2_CH0 34 #define DMAMUX_SOURCE_FTM2_CH1 35 #define DMAMUX_SOURCE_ADC0 40 #define DMAMUX_SOURCE_ADC1 41 #define DMAMUX_SOURCE_CMP0 42 #define DMAMUX_SOURCE_CMP1 43 #define DMAMUX_SOURCE_CMP2 44 #define DMAMUX_SOURCE_DAC0 45 #define DMAMUX_SOURCE_CMT 47 #define DMAMUX_SOURCE_PDB 48 #define DMAMUX_SOURCE_PORTA 49 #define DMAMUX_SOURCE_PORTB 50 #define DMAMUX_SOURCE_PORTC 51 #define DMAMUX_SOURCE_PORTD 52 #define DMAMUX_SOURCE_PORTE 53 #define DMAMUX_SOURCE_ALWAYS0 54 #define DMAMUX_SOURCE_ALWAYS1 55 #define DMAMUX_SOURCE_ALWAYS2 56 #define DMAMUX_SOURCE_ALWAYS3 57 #define DMAMUX_SOURCE_ALWAYS4 58 #define DMAMUX_SOURCE_ALWAYS5 59 #define DMAMUX_SOURCE_ALWAYS6 60 #define DMAMUX_SOURCE_ALWAYS7 61 #define DMAMUX_SOURCE_ALWAYS8 62 #define DMAMUX_SOURCE_ALWAYS9 63 #define DMAMUX_NUM_SOURCE_ALWAYS 10 #define KINETISK #define HAS_KINETISK_UART0 #define HAS_KINETISK_UART0_FIFO #define HAS_KINETISK_UART1 #define HAS_KINETISK_UART1_FIFO #define HAS_KINETISK_UART2 #define HAS_KINETIS_I2C0 #define HAS_KINETIS_I2C1 #define HAS_KINETIS_LLWU_16CH #define HAS_KINETIS_ADC0 #define HAS_KINETIS_ADC1 #define HAS_KINETIS_TSI #define HAS_KINETIS_FLASH_FTFL // Teensy-LC #elif defined(__MKL26Z64__) enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_FTFA = 5, IRQ_LOW_VOLTAGE = 6, IRQ_LLWU = 7, IRQ_I2C0 = 8, IRQ_I2C1 = 9, IRQ_SPI0 = 10, IRQ_SPI1 = 11, IRQ_UART0_STATUS = 12, IRQ_UART1_STATUS = 13, IRQ_UART2_STATUS = 14, IRQ_ADC0 = 15, IRQ_CMP0 = 16, IRQ_FTM0 = 17, IRQ_FTM1 = 18, IRQ_FTM2 = 19, IRQ_RTC_ALARM = 20, IRQ_RTC_SECOND = 21, IRQ_PIT = 22, IRQ_I2S0 = 23, IRQ_USBOTG = 24, IRQ_DAC0 = 25, IRQ_TSI = 26, IRQ_MCG = 27, IRQ_LPTMR = 28, IRQ_SOFTWARE = 29, // TODO: verify this works IRQ_PORTA = 30, IRQ_PORTCD = 31 }; #define NVIC_NUM_INTERRUPTS 32 #define DMA_NUM_CHANNELS 4 #define DMAMUX_SOURCE_UART0_RX 2 #define DMAMUX_SOURCE_UART0_TX 3 #define DMAMUX_SOURCE_UART1_RX 4 #define DMAMUX_SOURCE_UART1_TX 5 #define DMAMUX_SOURCE_UART2_RX 6 #define DMAMUX_SOURCE_UART2_TX 7 #define DMAMUX_SOURCE_I2S0_RX 14 #define DMAMUX_SOURCE_I2S0_TX 15 #define DMAMUX_SOURCE_SPI0_RX 16 #define DMAMUX_SOURCE_SPI0_TX 17 #define DMAMUX_SOURCE_SPI1_RX 18 #define DMAMUX_SOURCE_SPI1_TX 19 #define DMAMUX_SOURCE_I2C0 22 #define DMAMUX_SOURCE_I2C1 23 #define DMAMUX_SOURCE_TPM0_CH0 24 #define DMAMUX_SOURCE_TPM0_CH1 25 #define DMAMUX_SOURCE_TPM0_CH2 26 #define DMAMUX_SOURCE_TPM0_CH3 27 #define DMAMUX_SOURCE_TPM0_CH4 28 #define DMAMUX_SOURCE_TPM0_CH5 29 #define DMAMUX_SOURCE_TPM1_CH0 32 #define DMAMUX_SOURCE_TPM1_CH1 33 #define DMAMUX_SOURCE_TPM2_CH0 34 #define DMAMUX_SOURCE_TPM2_CH1 35 #define DMAMUX_SOURCE_ADC0 40 #define DMAMUX_SOURCE_CMP0 42 #define DMAMUX_SOURCE_DAC0 45 #define DMAMUX_SOURCE_PORTA 49 #define DMAMUX_SOURCE_PORTC 51 #define DMAMUX_SOURCE_PORTD 52 #define DMAMUX_SOURCE_FTM0_OV 54 #define DMAMUX_SOURCE_FTM1_OV 55 #define DMAMUX_SOURCE_FTM2_OV 56 #define DMAMUX_SOURCE_TSI 57 #define DMAMUX_SOURCE_ALWAYS0 60 #define DMAMUX_SOURCE_ALWAYS1 61 #define DMAMUX_SOURCE_ALWAYS2 62 #define DMAMUX_SOURCE_ALWAYS3 63 #define DMAMUX_NUM_SOURCE_ALWAYS 4 #define KINETISL #define HAS_KINETISL_UART0 #define HAS_KINETISL_UART1 #define HAS_KINETISL_UART2 #define HAS_KINETIS_I2C0 #define HAS_KINETIS_I2C0_STOPF #define HAS_KINETIS_I2C1 #define HAS_KINETIS_I2C1_STOPF #define HAS_KINETIS_LLWU_16CH #define HAS_KINETIS_ADC0 #define HAS_KINETIS_TSI_LITE #define HAS_KINETIS_FLASH_FTFA #elif defined(__MK64FX512__) enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_DMA_CH4 = 4, IRQ_DMA_CH5 = 5, IRQ_DMA_CH6 = 6, IRQ_DMA_CH7 = 7, IRQ_DMA_CH8 = 8, IRQ_DMA_CH9 = 9, IRQ_DMA_CH10 = 10, IRQ_DMA_CH11 = 11, IRQ_DMA_CH12 = 12, IRQ_DMA_CH13 = 13, IRQ_DMA_CH14 = 14, IRQ_DMA_CH15 = 15, IRQ_DMA_ERROR = 16, IRQ_MCM = 17, IRQ_FTFL_COMPLETE = 18, IRQ_FTFL_COLLISION = 19, IRQ_LOW_VOLTAGE = 20, IRQ_LLWU = 21, IRQ_WDOG = 22, IRQ_RNG = 23, IRQ_I2C0 = 24, IRQ_I2C1 = 25, IRQ_SPI0 = 26, IRQ_SPI1 = 27, IRQ_I2S0_TX = 28, IRQ_I2S0_RX = 29, IRQ_UART0_STATUS = 31, IRQ_UART0_ERROR = 32, IRQ_UART1_STATUS = 33, IRQ_UART1_ERROR = 34, IRQ_UART2_STATUS = 35, IRQ_UART2_ERROR = 36, IRQ_UART3_STATUS = 37, IRQ_UART3_ERROR = 38, IRQ_ADC0 = 39, IRQ_CMP0 = 40, IRQ_CMP1 = 41, IRQ_FTM0 = 42, IRQ_FTM1 = 43, IRQ_FTM2 = 44, IRQ_CMT = 45, IRQ_RTC_ALARM = 46, IRQ_RTC_SECOND = 47, IRQ_PIT_CH0 = 48, IRQ_PIT_CH1 = 49, IRQ_PIT_CH2 = 50, IRQ_PIT_CH3 = 51, IRQ_PDB = 52, IRQ_USBOTG = 53, IRQ_USBDCD = 54, IRQ_DAC0 = 56, IRQ_MCG = 57, IRQ_LPTMR = 58, IRQ_PORTA = 59, IRQ_PORTB = 60, IRQ_PORTC = 61, IRQ_PORTD = 62, IRQ_PORTE = 63, IRQ_SOFTWARE = 64, IRQ_SPI2 = 65, IRQ_UART4_STATUS = 66, IRQ_UART4_ERROR = 67, IRQ_UART5_STATUS = 68, IRQ_UART5_ERROR = 69, IRQ_CMP2 = 70, IRQ_FTM3 = 71, IRQ_DAC1 = 72, IRQ_ADC1 = 73, IRQ_I2C2 = 74, IRQ_CAN0_MESSAGE = 75, IRQ_CAN0_BUS_OFF = 76, IRQ_CAN0_ERROR = 77, IRQ_CAN0_TX_WARN = 78, IRQ_CAN0_RX_WARN = 79, IRQ_CAN0_WAKEUP = 80, IRQ_SDHC = 81, IRQ_ENET_TIMER = 82, IRQ_ENET_TX = 83, IRQ_ENET_RX = 84, IRQ_ENET_ERROR = 85 }; #define NVIC_NUM_INTERRUPTS 86 #define DMA_NUM_CHANNELS 16 #define DMAMUX_SOURCE_TSI 1 #define DMAMUX_SOURCE_UART0_RX 2 #define DMAMUX_SOURCE_UART0_TX 3 #define DMAMUX_SOURCE_UART1_RX 4 #define DMAMUX_SOURCE_UART1_TX 5 #define DMAMUX_SOURCE_UART2_RX 6 #define DMAMUX_SOURCE_UART2_TX 7 #define DMAMUX_SOURCE_UART3_RX 8 #define DMAMUX_SOURCE_UART3_TX 9 #define DMAMUX_SOURCE_UART4_RXTX 10 #define DMAMUX_SOURCE_UART5_RXTX 11 #define DMAMUX_SOURCE_I2S0_RX 12 #define DMAMUX_SOURCE_I2S0_TX 13 #define DMAMUX_SOURCE_SPI0_RX 14 #define DMAMUX_SOURCE_SPI0_TX 15 #define DMAMUX_SOURCE_SPI1_RX 16 #define DMAMUX_SOURCE_SPI1_TX 17 #define DMAMUX_SOURCE_I2C0 18 #define DMAMUX_SOURCE_I2C1 19 #define DMAMUX_SOURCE_I2C2 19 #define DMAMUX_SOURCE_FTM0_CH0 20 #define DMAMUX_SOURCE_FTM0_CH1 21 #define DMAMUX_SOURCE_FTM0_CH2 22 #define DMAMUX_SOURCE_FTM0_CH3 23 #define DMAMUX_SOURCE_FTM0_CH4 24 #define DMAMUX_SOURCE_FTM0_CH5 25 #define DMAMUX_SOURCE_FTM0_CH6 26 #define DMAMUX_SOURCE_FTM0_CH7 27 #define DMAMUX_SOURCE_FTM1_CH0 28 #define DMAMUX_SOURCE_FTM1_CH1 29 #define DMAMUX_SOURCE_FTM2_CH0 30 #define DMAMUX_SOURCE_FTM2_CH1 31 #define DMAMUX_SOURCE_FTM3_CH0 32 #define DMAMUX_SOURCE_FTM3_CH1 33 #define DMAMUX_SOURCE_FTM3_CH2 34 #define DMAMUX_SOURCE_FTM3_CH3 35 #define DMAMUX_SOURCE_FTM3_CH4 36 #define DMAMUX_SOURCE_FTM3_CH5 37 #define DMAMUX_SOURCE_FTM3_CH6 38 #define DMAMUX_SOURCE_FTM3_CH7 39 #define DMAMUX_SOURCE_ADC0 40 #define DMAMUX_SOURCE_ADC1 41 #define DMAMUX_SOURCE_CMP0 42 #define DMAMUX_SOURCE_CMP1 43 #define DMAMUX_SOURCE_CMP2 44 #define DMAMUX_SOURCE_DAC0 45 #define DMAMUX_SOURCE_DAC1 46 #define DMAMUX_SOURCE_CMT 47 #define DMAMUX_SOURCE_PDB 48 #define DMAMUX_SOURCE_PORTA 49 #define DMAMUX_SOURCE_PORTB 50 #define DMAMUX_SOURCE_PORTC 51 #define DMAMUX_SOURCE_PORTD 52 #define DMAMUX_SOURCE_PORTE 53 #define DMAMUX_SOURCE_IEEE1588_T0 54 #define DMAMUX_SOURCE_IEEE1588_T1 55 #define DMAMUX_SOURCE_IEEE1588_T2 56 #define DMAMUX_SOURCE_IEEE1588_T3 57 #define DMAMUX_SOURCE_ALWAYS0 58 #define DMAMUX_SOURCE_ALWAYS1 59 #define DMAMUX_SOURCE_ALWAYS2 60 #define DMAMUX_SOURCE_ALWAYS3 61 #define DMAMUX_SOURCE_ALWAYS4 62 #define DMAMUX_SOURCE_ALWAYS5 63 #define DMAMUX_NUM_SOURCE_ALWAYS 6 #define KINETISK #define HAS_KINETISK_UART0 #define HAS_KINETISK_UART0_FIFO #define HAS_KINETISK_UART1 #define HAS_KINETISK_UART1_FIFO #define HAS_KINETISK_UART2 #define HAS_KINETISK_UART3 #define HAS_KINETISK_UART4 #define HAS_KINETISK_UART5 #define HAS_KINETIS_I2C0 #define HAS_KINETIS_I2C0_STOPF #define HAS_KINETIS_I2C1 #define HAS_KINETIS_I2C1_STOPF #define HAS_KINETIS_I2C2 #define HAS_KINETIS_I2C2_STOPF #define HAS_KINETIS_LLWU_32CH #define HAS_KINETIS_MPU #define HAS_KINETIS_ADC0 #define HAS_KINETIS_ADC1 #define HAS_KINETIS_FLASH_FTFE #define HAS_KINETIS_SDHC #elif defined(__MK66FX1M0__) // https://forum.pjrc.com/threads/24633-Any-Chance-of-a-Teensy-3-1?p=78655&viewfull=1#post78655 enum IRQ_NUMBER_t { IRQ_DMA_CH0 = 0, IRQ_DMA_CH1 = 1, IRQ_DMA_CH2 = 2, IRQ_DMA_CH3 = 3, IRQ_DMA_CH4 = 4, IRQ_DMA_CH5 = 5, IRQ_DMA_CH6 = 6, IRQ_DMA_CH7 = 7, IRQ_DMA_CH8 = 8, IRQ_DMA_CH9 = 9, IRQ_DMA_CH10 = 10, IRQ_DMA_CH11 = 11, IRQ_DMA_CH12 = 12, IRQ_DMA_CH13 = 13, IRQ_DMA_CH14 = 14, IRQ_DMA_CH15 = 15, IRQ_DMA_ERROR = 16, IRQ_MCM = 17, IRQ_FTFL_COMPLETE = 18, IRQ_FTFL_COLLISION = 19, IRQ_LOW_VOLTAGE = 20, IRQ_LLWU = 21, IRQ_WDOG = 22, IRQ_RNG = 23, IRQ_I2C0 = 24, IRQ_I2C1 = 25, IRQ_SPI0 = 26, IRQ_SPI1 = 27, IRQ_I2S0_TX = 28, IRQ_I2S0_RX = 29, IRQ_UART0_STATUS = 31, IRQ_UART0_ERROR = 32, IRQ_UART1_STATUS = 33, IRQ_UART1_ERROR = 34, IRQ_UART2_STATUS = 35, IRQ_UART2_ERROR = 36, IRQ_UART3_STATUS = 37, IRQ_UART3_ERROR = 38, IRQ_ADC0 = 39, IRQ_CMP0 = 40, IRQ_CMP1 = 41, IRQ_FTM0 = 42, IRQ_FTM1 = 43, IRQ_FTM2 = 44, IRQ_CMT = 45, IRQ_RTC_ALARM = 46, IRQ_RTC_SECOND = 47, IRQ_PIT_CH0 = 48, IRQ_PIT_CH1 = 49, IRQ_PIT_CH2 = 50, IRQ_PIT_CH3 = 51, IRQ_PDB = 52, IRQ_USBOTG = 53, IRQ_USBDCD = 54, IRQ_DAC0 = 56, IRQ_MCG = 57, IRQ_LPTMR = 58, IRQ_PORTA = 59, IRQ_PORTB = 60, IRQ_PORTC = 61, IRQ_PORTD = 62, IRQ_PORTE = 63, IRQ_SOFTWARE = 64, IRQ_SPI2 = 65, IRQ_UART4_STATUS = 66, IRQ_UART4_ERROR = 67, IRQ_CMP2 = 70, IRQ_FTM3 = 71, IRQ_DAC1 = 72, IRQ_ADC1 = 73, IRQ_I2C2 = 74, IRQ_CAN0_MESSAGE = 75, IRQ_CAN0_BUS_OFF = 76, IRQ_CAN0_ERROR = 77, IRQ_CAN0_TX_WARN = 78, IRQ_CAN0_RX_WARN = 79, IRQ_CAN0_WAKEUP = 80, IRQ_SDHC = 81, IRQ_ENET_TIMER = 82, IRQ_ENET_TX = 83, IRQ_ENET_RX = 84, IRQ_ENET_ERROR = 85, IRQ_LPUART0 = 86, IRQ_TSI = 87, IRQ_TPM1 = 88, IRQ_TPM2 = 89, IRQ_USBHS_PHY = 90, IRQ_I2C3 = 91, IRQ_CMP3 = 92, IRQ_USBHS = 93, IRQ_CAN1_MESSAGE = 94, IRQ_CAN1_BUS_OFF = 95, IRQ_CAN1_ERROR = 96, IRQ_CAN1_TX_WARN = 97, IRQ_CAN1_RX_WARN = 98, IRQ_CAN1_WAKEUP = 99 }; #define NVIC_NUM_INTERRUPTS 100 #define DMA_NUM_CHANNELS 32 #define DMAMUX_SOURCE_TSI 1 #define DMAMUX_SOURCE_UART0_RX 2 #define DMAMUX_SOURCE_UART0_TX 3 #define DMAMUX_SOURCE_UART1_RX 4 #define DMAMUX_SOURCE_UART1_TX 5 #define DMAMUX_SOURCE_UART2_RX 6 #define DMAMUX_SOURCE_UART2_TX 7 #define DMAMUX_SOURCE_UART3_RX 8 #define DMAMUX_SOURCE_UART3_TX 9 #define DMAMUX_SOURCE_UART4_RXTX 10 #define DMAMUX_SOURCE_I2S0_RX 12 #define DMAMUX_SOURCE_I2S0_TX 13 #define DMAMUX_SOURCE_SPI0_RX 14 #define DMAMUX_SOURCE_SPI0_TX 15 #define DMAMUX_SOURCE_SPI1_RX 16 #define DMAMUX_SOURCE_SPI1_TX 17 #define DMAMUX_SOURCE_I2C0 18 #define DMAMUX_SOURCE_I2C3 18 #define DMAMUX_SOURCE_I2C1 19 #define DMAMUX_SOURCE_I2C2 19 #define DMAMUX_SOURCE_FTM0_CH0 20 #define DMAMUX_SOURCE_FTM0_CH1 21 #define DMAMUX_SOURCE_FTM0_CH2 22 #define DMAMUX_SOURCE_FTM0_CH3 23 #define DMAMUX_SOURCE_FTM0_CH4 24 #define DMAMUX_SOURCE_FTM0_CH5 25 #define DMAMUX_SOURCE_FTM0_CH6 26 #define DMAMUX_SOURCE_FTM0_CH7 27 #define DMAMUX_SOURCE_FTM1_CH0 28 #define DMAMUX_SOURCE_TPM1_CH0 28 #define DMAMUX_SOURCE_FTM1_CH1 29 #define DMAMUX_SOURCE_TPM1_CH1 29 #define DMAMUX_SOURCE_FTM2_CH0 30 #define DMAMUX_SOURCE_TPM2_CH0 30 #define DMAMUX_SOURCE_FTM2_CH1 31 #define DMAMUX_SOURCE_TPM2_CH1 31 #define DMAMUX_SOURCE_FTM3_CH0 32 #define DMAMUX_SOURCE_FTM3_CH1 33 #define DMAMUX_SOURCE_FTM3_CH2 34 #define DMAMUX_SOURCE_FTM3_CH3 35 #define DMAMUX_SOURCE_FTM3_CH4 36 #define DMAMUX_SOURCE_FTM3_CH5 37 #define DMAMUX_SOURCE_FTM3_CH6 38 #define DMAMUX_SOURCE_SPI2_RX 38 #define DMAMUX_SOURCE_FTM3_CH7 39 #define DMAMUX_SOURCE_SPI2_TX 39 #define DMAMUX_SOURCE_ADC0 40 #define DMAMUX_SOURCE_ADC1 41 #define DMAMUX_SOURCE_CMP0 42 #define DMAMUX_SOURCE_CMP1 43 #define DMAMUX_SOURCE_CMP2 44 #define DMAMUX_SOURCE_CMP3 44 #define DMAMUX_SOURCE_DAC0 45 #define DMAMUX_SOURCE_DAC1 46 #define DMAMUX_SOURCE_CMT 47 #define DMAMUX_SOURCE_PDB 48 #define DMAMUX_SOURCE_PORTA 49 #define DMAMUX_SOURCE_PORTB 50 #define DMAMUX_SOURCE_PORTC 51 #define DMAMUX_SOURCE_PORTD 52 #define DMAMUX_SOURCE_PORTE 53 #define DMAMUX_SOURCE_IEEE1588_T0 54 #define DMAMUX_SOURCE_IEEE1588_T1 55 #define DMAMUX_SOURCE_FTM1_OV 55 #define DMAMUX_SOURCE_IEEE1588_T2 56 #define DMAMUX_SOURCE_FTM2_OV 56 #define DMAMUX_SOURCE_IEEE1588_T3 57 #define DMAMUX_SOURCE_LPUART0_RX 58 #define DMAMUX_SOURCE_LPUART0_TX 59 #define DMAMUX_SOURCE_ALWAYS0 60 #define DMAMUX_SOURCE_ALWAYS1 61 #define DMAMUX_SOURCE_ALWAYS2 62 #define DMAMUX_SOURCE_ALWAYS3 63 #define DMAMUX_NUM_SOURCE_ALWAYS 4 #define KINETISK #define HAS_KINETISK_UART0 #define HAS_KINETISK_UART0_FIFO #define HAS_KINETISK_UART1 #define HAS_KINETISK_UART1_FIFO #define HAS_KINETISK_UART2 #define HAS_KINETISK_UART3 #define HAS_KINETISK_UART4 #define HAS_KINETISK_LPUART0 #define HAS_KINETIS_I2C0 #define HAS_KINETIS_I2C0_STOPF #define HAS_KINETIS_I2C1 #define HAS_KINETIS_I2C1_STOPF #define HAS_KINETIS_I2C2 #define HAS_KINETIS_I2C2_STOPF #define HAS_KINETIS_I2C3 #define HAS_KINETIS_I2C3_STOPF #define HAS_KINETIS_LLWU_32CH #define HAS_KINETIS_MPU #define HAS_KINETIS_ADC0 #define HAS_KINETIS_ADC1 #define HAS_KINETIS_TSI_LITE #define HAS_KINETIS_FLASH_FTFE #define HAS_KINETIS_SDHC #define HAS_KINETIS_HSRUN #endif // end of board-specific definitions #if (F_CPU == 240000000) #define F_PLL 240000000 #ifndef F_BUS #define F_BUS 60000000 //#define F_BUS 80000000 // uncomment these to try peripheral overclocking //#define F_BUS 120000000 // all the usual overclocking caveats apply... #endif #define F_MEM 30000000 #elif (F_CPU == 216000000) #define F_PLL 216000000 #ifndef F_BUS #define F_BUS 54000000 //#define F_BUS 72000000 //#define F_BUS 108000000 #endif #define F_MEM 27000000 #elif (F_CPU == 192000000) #define F_PLL 192000000 #ifndef F_BUS #define F_BUS 48000000 //#define F_BUS 64000000 //#define F_BUS 96000000 #endif #define F_MEM 27428571 #elif (F_CPU == 180000000) #define F_PLL 180000000 #ifndef F_BUS #define F_BUS 60000000 //#define F_BUS 90000000 #endif #define F_MEM 25714286 #elif (F_CPU == 168000000) #define F_PLL 168000000 #define F_BUS 56000000 #define F_MEM 28000000 #elif (F_CPU == 144000000) #define F_PLL 144000000 #ifndef F_BUS #define F_BUS 48000000 //#define F_BUS 72000000 #endif #define F_MEM 28800000 #elif (F_CPU == 120000000) #define F_PLL 120000000 #ifndef F_BUS #define F_BUS 60000000 //#define F_BUS 120000000 #endif #define F_MEM 24000000 #elif (F_CPU == 96000000) #define F_PLL 96000000 #ifndef F_BUS #define F_BUS 48000000 //#define F_BUS 96000000 #endif #define F_MEM 24000000 #elif (F_CPU == 72000000) #define F_PLL 72000000 #ifndef F_BUS #define F_BUS 36000000 //#define F_BUS 72000000 #endif #define F_MEM 24000000 #elif (F_CPU == 48000000) #define F_PLL 96000000 #if defined(KINETISK) #define F_BUS 48000000 #elif defined(KINETISL) #define F_BUS 24000000 #endif #define F_MEM 24000000 #elif (F_CPU == 24000000) #define F_PLL 96000000 #define F_BUS 24000000 #define F_MEM 24000000 #elif (F_CPU == 16000000) #define F_PLL 16000000 #define F_BUS 16000000 #define F_MEM 16000000 #elif (F_CPU == 8000000) #define F_PLL 8000000 #define F_BUS 8000000 #define F_MEM 8000000 #elif (F_CPU == 4000000) #define F_PLL 4000000 #define F_BUS 4000000 #define F_MEM 4000000 #elif (F_CPU == 2000000) #define F_PLL 2000000 #define F_BUS 2000000 #define F_MEM 1000000 #endif #ifndef NULL #define NULL (0) #endif // Port control and interrupts (PORT) #define PORTA_PCR0 (*(volatile uint32_t *)0x40049000) // Pin Control Register n #define PORT_PCR_ISF ((uint32_t)0x01000000) // Interrupt Status Flag #define PORT_PCR_IRQC(n) ((uint32_t)(((n) & 15) << 16)) // Interrupt Configuration #define PORT_PCR_IRQC_MASK ((uint32_t)0x000F0000) #define PORT_PCR_LK ((uint32_t)0x00008000) // Lock Register #define PORT_PCR_MUX(n) ((uint32_t)(((n) & 7) << 8)) // Pin Mux Control #define PORT_PCR_MUX_MASK ((uint32_t)0x00000700) #define PORT_PCR_DSE ((uint32_t)0x00000040) // Drive Strength Enable #define PORT_PCR_ODE ((uint32_t)0x00000020) // Open Drain Enable #define PORT_PCR_PFE ((uint32_t)0x00000010) // Passive Filter Enable #define PORT_PCR_SRE ((uint32_t)0x00000004) // Slew Rate Enable #define PORT_PCR_PE ((uint32_t)0x00000002) // Pull Enable #define PORT_PCR_PS ((uint32_t)0x00000001) // Pull Select #define PORTA_PCR1 (*(volatile uint32_t *)0x40049004) // Pin Control Register n #define PORTA_PCR2 (*(volatile uint32_t *)0x40049008) // Pin Control Register n #define PORTA_PCR3 (*(volatile uint32_t *)0x4004900C) // Pin Control Register n #define PORTA_PCR4 (*(volatile uint32_t *)0x40049010) // Pin Control Register n #define PORTA_PCR5 (*(volatile uint32_t *)0x40049014) // Pin Control Register n #define PORTA_PCR6 (*(volatile uint32_t *)0x40049018) // Pin Control Register n #define PORTA_PCR7 (*(volatile uint32_t *)0x4004901C) // Pin Control Register n #define PORTA_PCR8 (*(volatile uint32_t *)0x40049020) // Pin Control Register n #define PORTA_PCR9 (*(volatile uint32_t *)0x40049024) // Pin Control Register n #define PORTA_PCR10 (*(volatile uint32_t *)0x40049028) // Pin Control Register n #define PORTA_PCR11 (*(volatile uint32_t *)0x4004902C) // Pin Control Register n #define PORTA_PCR12 (*(volatile uint32_t *)0x40049030) // Pin Control Register n #define PORTA_PCR13 (*(volatile uint32_t *)0x40049034) // Pin Control Register n #define PORTA_PCR14 (*(volatile uint32_t *)0x40049038) // Pin Control Register n #define PORTA_PCR15 (*(volatile uint32_t *)0x4004903C) // Pin Control Register n #define PORTA_PCR16 (*(volatile uint32_t *)0x40049040) // Pin Control Register n #define PORTA_PCR17 (*(volatile uint32_t *)0x40049044) // Pin Control Register n #define PORTA_PCR18 (*(volatile uint32_t *)0x40049048) // Pin Control Register n #define PORTA_PCR19 (*(volatile uint32_t *)0x4004904C) // Pin Control Register n #define PORTA_PCR20 (*(volatile uint32_t *)0x40049050) // Pin Control Register n #define PORTA_PCR21 (*(volatile uint32_t *)0x40049054) // Pin Control Register n #define PORTA_PCR22 (*(volatile uint32_t *)0x40049058) // Pin Control Register n #define PORTA_PCR23 (*(volatile uint32_t *)0x4004905C) // Pin Control Register n #define PORTA_PCR24 (*(volatile uint32_t *)0x40049060) // Pin Control Register n #define PORTA_PCR25 (*(volatile uint32_t *)0x40049064) // Pin Control Register n #define PORTA_PCR26 (*(volatile uint32_t *)0x40049068) // Pin Control Register n #define PORTA_PCR27 (*(volatile uint32_t *)0x4004906C) // Pin Control Register n #define PORTA_PCR28 (*(volatile uint32_t *)0x40049070) // Pin Control Register n #define PORTA_PCR29 (*(volatile uint32_t *)0x40049074) // Pin Control Register n #define PORTA_PCR30 (*(volatile uint32_t *)0x40049078) // Pin Control Register n #define PORTA_PCR31 (*(volatile uint32_t *)0x4004907C) // Pin Control Register n #define PORTA_GPCLR (*(volatile uint32_t *)0x40049080) // Global Pin Control Low Register #define PORTA_GPCHR (*(volatile uint32_t *)0x40049084) // Global Pin Control High Register #define PORTA_ISFR (*(volatile uint32_t *)0x400490A0) // Interrupt Status Flag Register #define PORTB_PCR0 (*(volatile uint32_t *)0x4004A000) // Pin Control Register n #define PORTB_PCR1 (*(volatile uint32_t *)0x4004A004) // Pin Control Register n #define PORTB_PCR2 (*(volatile uint32_t *)0x4004A008) // Pin Control Register n #define PORTB_PCR3 (*(volatile uint32_t *)0x4004A00C) // Pin Control Register n #define PORTB_PCR4 (*(volatile uint32_t *)0x4004A010) // Pin Control Register n #define PORTB_PCR5 (*(volatile uint32_t *)0x4004A014) // Pin Control Register n #define PORTB_PCR6 (*(volatile uint32_t *)0x4004A018) // Pin Control Register n #define PORTB_PCR7 (*(volatile uint32_t *)0x4004A01C) // Pin Control Register n #define PORTB_PCR8 (*(volatile uint32_t *)0x4004A020) // Pin Control Register n #define PORTB_PCR9 (*(volatile uint32_t *)0x4004A024) // Pin Control Register n #define PORTB_PCR10 (*(volatile uint32_t *)0x4004A028) // Pin Control Register n #define PORTB_PCR11 (*(volatile uint32_t *)0x4004A02C) // Pin Control Register n #define PORTB_PCR12 (*(volatile uint32_t *)0x4004A030) // Pin Control Register n #define PORTB_PCR13 (*(volatile uint32_t *)0x4004A034) // Pin Control Register n #define PORTB_PCR14 (*(volatile uint32_t *)0x4004A038) // Pin Control Register n #define PORTB_PCR15 (*(volatile uint32_t *)0x4004A03C) // Pin Control Register n #define PORTB_PCR16 (*(volatile uint32_t *)0x4004A040) // Pin Control Register n #define PORTB_PCR17 (*(volatile uint32_t *)0x4004A044) // Pin Control Register n #define PORTB_PCR18 (*(volatile uint32_t *)0x4004A048) // Pin Control Register n #define PORTB_PCR19 (*(volatile uint32_t *)0x4004A04C) // Pin Control Register n #define PORTB_PCR20 (*(volatile uint32_t *)0x4004A050) // Pin Control Register n #define PORTB_PCR21 (*(volatile uint32_t *)0x4004A054) // Pin Control Register n #define PORTB_PCR22 (*(volatile uint32_t *)0x4004A058) // Pin Control Register n #define PORTB_PCR23 (*(volatile uint32_t *)0x4004A05C) // Pin Control Register n #define PORTB_PCR24 (*(volatile uint32_t *)0x4004A060) // Pin Control Register n #define PORTB_PCR25 (*(volatile uint32_t *)0x4004A064) // Pin Control Register n #define PORTB_PCR26 (*(volatile uint32_t *)0x4004A068) // Pin Control Register n #define PORTB_PCR27 (*(volatile uint32_t *)0x4004A06C) // Pin Control Register n #define PORTB_PCR28 (*(volatile uint32_t *)0x4004A070) // Pin Control Register n #define PORTB_PCR29 (*(volatile uint32_t *)0x4004A074) // Pin Control Register n #define PORTB_PCR30 (*(volatile uint32_t *)0x4004A078) // Pin Control Register n #define PORTB_PCR31 (*(volatile uint32_t *)0x4004A07C) // Pin Control Register n #define PORTB_GPCLR (*(volatile uint32_t *)0x4004A080) // Global Pin Control Low Register #define PORTB_GPCHR (*(volatile uint32_t *)0x4004A084) // Global Pin Control High Register #define PORTB_ISFR (*(volatile uint32_t *)0x4004A0A0) // Interrupt Status Flag Register #define PORTC_PCR0 (*(volatile uint32_t *)0x4004B000) // Pin Control Register n #define PORTC_PCR1 (*(volatile uint32_t *)0x4004B004) // Pin Control Register n #define PORTC_PCR2 (*(volatile uint32_t *)0x4004B008) // Pin Control Register n #define PORTC_PCR3 (*(volatile uint32_t *)0x4004B00C) // Pin Control Register n #define PORTC_PCR4 (*(volatile uint32_t *)0x4004B010) // Pin Control Register n #define PORTC_PCR5 (*(volatile uint32_t *)0x4004B014) // Pin Control Register n #define PORTC_PCR6 (*(volatile uint32_t *)0x4004B018) // Pin Control Register n #define PORTC_PCR7 (*(volatile uint32_t *)0x4004B01C) // Pin Control Register n #define PORTC_PCR8 (*(volatile uint32_t *)0x4004B020) // Pin Control Register n #define PORTC_PCR9 (*(volatile uint32_t *)0x4004B024) // Pin Control Register n #define PORTC_PCR10 (*(volatile uint32_t *)0x4004B028) // Pin Control Register n #define PORTC_PCR11 (*(volatile uint32_t *)0x4004B02C) // Pin Control Register n #define PORTC_PCR12 (*(volatile uint32_t *)0x4004B030) // Pin Control Register n #define PORTC_PCR13 (*(volatile uint32_t *)0x4004B034) // Pin Control Register n #define PORTC_PCR14 (*(volatile uint32_t *)0x4004B038) // Pin Control Register n #define PORTC_PCR15 (*(volatile uint32_t *)0x4004B03C) // Pin Control Register n #define PORTC_PCR16 (*(volatile uint32_t *)0x4004B040) // Pin Control Register n #define PORTC_PCR17 (*(volatile uint32_t *)0x4004B044) // Pin Control Register n #define PORTC_PCR18 (*(volatile uint32_t *)0x4004B048) // Pin Control Register n #define PORTC_PCR19 (*(volatile uint32_t *)0x4004B04C) // Pin Control Register n #define PORTC_PCR20 (*(volatile uint32_t *)0x4004B050) // Pin Control Register n #define PORTC_PCR21 (*(volatile uint32_t *)0x4004B054) // Pin Control Register n #define PORTC_PCR22 (*(volatile uint32_t *)0x4004B058) // Pin Control Register n #define PORTC_PCR23 (*(volatile uint32_t *)0x4004B05C) // Pin Control Register n #define PORTC_PCR24 (*(volatile uint32_t *)0x4004B060) // Pin Control Register n #define PORTC_PCR25 (*(volatile uint32_t *)0x4004B064) // Pin Control Register n #define PORTC_PCR26 (*(volatile uint32_t *)0x4004B068) // Pin Control Register n #define PORTC_PCR27 (*(volatile uint32_t *)0x4004B06C) // Pin Control Register n #define PORTC_PCR28 (*(volatile uint32_t *)0x4004B070) // Pin Control Register n #define PORTC_PCR29 (*(volatile uint32_t *)0x4004B074) // Pin Control Register n #define PORTC_PCR30 (*(volatile uint32_t *)0x4004B078) // Pin Control Register n #define PORTC_PCR31 (*(volatile uint32_t *)0x4004B07C) // Pin Control Register n #define PORTC_GPCLR (*(volatile uint32_t *)0x4004B080) // Global Pin Control Low Register #define PORTC_GPCHR (*(volatile uint32_t *)0x4004B084) // Global Pin Control High Register #define PORTC_ISFR (*(volatile uint32_t *)0x4004B0A0) // Interrupt Status Flag Register #define PORTD_PCR0 (*(volatile uint32_t *)0x4004C000) // Pin Control Register n #define PORTD_PCR1 (*(volatile uint32_t *)0x4004C004) // Pin Control Register n #define PORTD_PCR2 (*(volatile uint32_t *)0x4004C008) // Pin Control Register n #define PORTD_PCR3 (*(volatile uint32_t *)0x4004C00C) // Pin Control Register n #define PORTD_PCR4 (*(volatile uint32_t *)0x4004C010) // Pin Control Register n #define PORTD_PCR5 (*(volatile uint32_t *)0x4004C014) // Pin Control Register n #define PORTD_PCR6 (*(volatile uint32_t *)0x4004C018) // Pin Control Register n #define PORTD_PCR7 (*(volatile uint32_t *)0x4004C01C) // Pin Control Register n #define PORTD_PCR8 (*(volatile uint32_t *)0x4004C020) // Pin Control Register n #define PORTD_PCR9 (*(volatile uint32_t *)0x4004C024) // Pin Control Register n #define PORTD_PCR10 (*(volatile uint32_t *)0x4004C028) // Pin Control Register n #define PORTD_PCR11 (*(volatile uint32_t *)0x4004C02C) // Pin Control Register n #define PORTD_PCR12 (*(volatile uint32_t *)0x4004C030) // Pin Control Register n #define PORTD_PCR13 (*(volatile uint32_t *)0x4004C034) // Pin Control Register n #define PORTD_PCR14 (*(volatile uint32_t *)0x4004C038) // Pin Control Register n #define PORTD_PCR15 (*(volatile uint32_t *)0x4004C03C) // Pin Control Register n #define PORTD_PCR16 (*(volatile uint32_t *)0x4004C040) // Pin Control Register n #define PORTD_PCR17 (*(volatile uint32_t *)0x4004C044) // Pin Control Register n #define PORTD_PCR18 (*(volatile uint32_t *)0x4004C048) // Pin Control Register n #define PORTD_PCR19 (*(volatile uint32_t *)0x4004C04C) // Pin Control Register n #define PORTD_PCR20 (*(volatile uint32_t *)0x4004C050) // Pin Control Register n #define PORTD_PCR21 (*(volatile uint32_t *)0x4004C054) // Pin Control Register n #define PORTD_PCR22 (*(volatile uint32_t *)0x4004C058) // Pin Control Register n #define PORTD_PCR23 (*(volatile uint32_t *)0x4004C05C) // Pin Control Register n #define PORTD_PCR24 (*(volatile uint32_t *)0x4004C060) // Pin Control Register n #define PORTD_PCR25 (*(volatile uint32_t *)0x4004C064) // Pin Control Register n #define PORTD_PCR26 (*(volatile uint32_t *)0x4004C068) // Pin Control Register n #define PORTD_PCR27 (*(volatile uint32_t *)0x4004C06C) // Pin Control Register n #define PORTD_PCR28 (*(volatile uint32_t *)0x4004C070) // Pin Control Register n #define PORTD_PCR29 (*(volatile uint32_t *)0x4004C074) // Pin Control Register n #define PORTD_PCR30 (*(volatile uint32_t *)0x4004C078) // Pin Control Register n #define PORTD_PCR31 (*(volatile uint32_t *)0x4004C07C) // Pin Control Register n #define PORTD_GPCLR (*(volatile uint32_t *)0x4004C080) // Global Pin Control Low Register #define PORTD_GPCHR (*(volatile uint32_t *)0x4004C084) // Global Pin Control High Register #define PORTD_ISFR (*(volatile uint32_t *)0x4004C0A0) // Interrupt Status Flag Register #define PORTE_PCR0 (*(volatile uint32_t *)0x4004D000) // Pin Control Register n #define PORTE_PCR1 (*(volatile uint32_t *)0x4004D004) // Pin Control Register n #define PORTE_PCR2 (*(volatile uint32_t *)0x4004D008) // Pin Control Register n #define PORTE_PCR3 (*(volatile uint32_t *)0x4004D00C) // Pin Control Register n #define PORTE_PCR4 (*(volatile uint32_t *)0x4004D010) // Pin Control Register n #define PORTE_PCR5 (*(volatile uint32_t *)0x4004D014) // Pin Control Register n #define PORTE_PCR6 (*(volatile uint32_t *)0x4004D018) // Pin Control Register n #define PORTE_PCR7 (*(volatile uint32_t *)0x4004D01C) // Pin Control Register n #define PORTE_PCR8 (*(volatile uint32_t *)0x4004D020) // Pin Control Register n #define PORTE_PCR9 (*(volatile uint32_t *)0x4004D024) // Pin Control Register n #define PORTE_PCR10 (*(volatile uint32_t *)0x4004D028) // Pin Control Register n #define PORTE_PCR11 (*(volatile uint32_t *)0x4004D02C) // Pin Control Register n #define PORTE_PCR12 (*(volatile uint32_t *)0x4004D030) // Pin Control Register n #define PORTE_PCR13 (*(volatile uint32_t *)0x4004D034) // Pin Control Register n #define PORTE_PCR14 (*(volatile uint32_t *)0x4004D038) // Pin Control Register n #define PORTE_PCR15 (*(volatile uint32_t *)0x4004D03C) // Pin Control Register n #define PORTE_PCR16 (*(volatile uint32_t *)0x4004D040) // Pin Control Register n #define PORTE_PCR17 (*(volatile uint32_t *)0x4004D044) // Pin Control Register n #define PORTE_PCR18 (*(volatile uint32_t *)0x4004D048) // Pin Control Register n #define PORTE_PCR19 (*(volatile uint32_t *)0x4004D04C) // Pin Control Register n #define PORTE_PCR20 (*(volatile uint32_t *)0x4004D050) // Pin Control Register n #define PORTE_PCR21 (*(volatile uint32_t *)0x4004D054) // Pin Control Register n #define PORTE_PCR22 (*(volatile uint32_t *)0x4004D058) // Pin Control Register n #define PORTE_PCR23 (*(volatile uint32_t *)0x4004D05C) // Pin Control Register n #define PORTE_PCR24 (*(volatile uint32_t *)0x4004D060) // Pin Control Register n #define PORTE_PCR25 (*(volatile uint32_t *)0x4004D064) // Pin Control Register n #define PORTE_PCR26 (*(volatile uint32_t *)0x4004D068) // Pin Control Register n #define PORTE_PCR27 (*(volatile uint32_t *)0x4004D06C) // Pin Control Register n #define PORTE_PCR28 (*(volatile uint32_t *)0x4004D070) // Pin Control Register n #define PORTE_PCR29 (*(volatile uint32_t *)0x4004D074) // Pin Control Register n #define PORTE_PCR30 (*(volatile uint32_t *)0x4004D078) // Pin Control Register n #define PORTE_PCR31 (*(volatile uint32_t *)0x4004D07C) // Pin Control Register n #define PORTE_GPCLR (*(volatile uint32_t *)0x4004D080) // Global Pin Control Low Register #define PORTE_GPCHR (*(volatile uint32_t *)0x4004D084) // Global Pin Control High Register #define PORTE_ISFR (*(volatile uint32_t *)0x4004D0A0) // Interrupt Status Flag Register // System Integration Module (SIM) #define SIM_SOPT1 (*(volatile uint32_t *)0x40047000) // System Options Register 1 #define SIM_SOPT1_USBREGEN ((uint32_t)0x80000000) // USB regulator enable #define SIM_SOPT1_USBSSTBY ((uint32_t)0x40000000) // USB regulator standby in Stop, VLPS, LLS and VLLS #define SIM_SOPT1_USBVSTBY ((uint32_t)0x20000000) // USB regulator standby in VLPR and VLPW #define SIM_SOPT1_OSC32KSEL(n) ((uint32_t)(((n) & 3) << 18)) // 32K oscillator clock, 0=system osc, 2=rtc osc, 3=lpo #define SIM_SOPT1CFG (*(volatile uint32_t *)0x40047004) // SOPT1 Configuration Register #define SIM_SOPT1CFG_USSWE ((uint32_t)0x04000000) // USB voltage regulator stop standby write enable #define SIM_SOPT1CFG_UVSWE ((uint32_t)0x02000000) // USB voltage regulator VLP standby write enable #define SIM_SOPT1CFG_URWE ((uint32_t)0x01000000) // USB voltage regulator enable write enable #define SIM_USBPHYCTL (*(volatile uint32_t *)0x40047008) // USB PHY Control Register #define SIM_USBPHYCTL_USBDISILIM ((uint32_t)0x00800000) // USB Disable Inrush Current Limit #define SIM_USBPHYCTL_USB3VOUTTRG(n) ((uint32_t)(((n) & 7) << 20)) // USB 3.3V Output Target #define SIM_USBPHYCTL_USBVREGPD ((uint32_t)0x00020000) // Enables the pulldown on the output of the USB Regulator. #define SIM_USBPHYCTL_USBVREGSEL ((uint32_t)0x00010000) // Selects the default input voltage source #define SIM_SOPT2 (*(volatile uint32_t *)0x40048004) // System Options Register 2 #define SIM_SOPT2_SDHCSRC(n) (uint32_t)(((n) & 3) << 28) // SDHC Clock, 0=system, 1=FLL/PLL, 2=OSCERCLK, 3=external #define SIM_SOPT2_LPUARTSRC(n) (uint32_t)(((n) & 3) << 26) // LPUART Clock, 0=off, 1=FLL/PLL, 2=OSCERCLK, 3=MCGIRCLK #define SIM_SOPT2_UART0SRC(n) (uint32_t)(((n) & 3) << 26) // UART0 Clock, 0=off, 1=FLL/PLL, 2=OSCERCLK, 3=MCGIRCLK #define SIM_SOPT2_TPMSRC(n) (uint32_t)(((n) & 3) << 24) // TPM Clock, 0=off, 1=FLL/PLL, 2=OSCERCLK, 3=MCGIRCLK #define SIM_SOPT2_TIMESRC(n) (uint32_t)(((n) & 3) << 20) // IEEE 1588 clock, 0=system, 1=FLL/PLL, 2=OSCERCLK, 3=external #define SIM_SOPT2_RMIISRC ((uint32_t)0x00080000) // 0=external, 1=external 1588 #define SIM_SOPT2_USBSRC ((uint32_t)0x00040000) // 0=USB_CLKIN, 1=FFL/PLL #define SIM_SOPT2_PLLFLLSEL ((uint32_t)0x00010000) // 0=FLL, 1=PLL #define SIM_SOPT2_IRC48SEL ((uint32_t)0x00030000) // 0=FLL, 1=PLL #define SIM_SOPT2_TRACECLKSEL ((uint32_t)0x00001000) // 0=MCGOUTCLK, 1=CPU #define SIM_SOPT2_PTD7PAD ((uint32_t)0x00000800) // 0=normal, 1=double drive PTD7 #define SIM_SOPT2_FBSL(n) ((uint32_t)(((n) & 3) << 8)) // FlexBus security level #define SIM_SOPT2_CLKOUTSEL(n) ((uint32_t)(((n) & 7) << 5)) // Selects the clock to output on the CLKOUT pin. #define SIM_SOPT2_RTCCLKOUTSEL ((uint32_t)0x00000010) // RTC clock out select #define SIM_SOPT2_USBREGEN ((uint32_t)0x00000002) // USB PHY PLL Regulator Enable #define SIM_SOPT2_USBSLSRC ((uint32_t)0x00000001) // USB Slow Clock Source #define SIM_SOPT4 (*(volatile uint32_t *)0x4004800C) // System Options Register 4 #define SIM_SOPT4_FTM3TRG1SRC ((uint32_t)0x80000000) // FlexTimer 3 Hardware Trigger 1 Source Select #define SIM_SOPT4_FTM3TRG0SRC ((uint32_t)0x40000000) // FlexTimer 3 Hardware Trigger 0 Source Select #define SIM_SOPT4_FTM0TRG1SRC ((uint32_t)0x20000000) // FlexTimer 0 Hardware Trigger 1 Source Select #define SIM_SOPT4_FTM0TRG0SRC ((uint32_t)0x10000000) // FlexTimer 0 Hardware Trigger 0 Source Select #define SIM_SOPT4_FTM3CLKSEL ((uint32_t)0x08000000) // FlexTimer 3 External Clock Pin Select #define SIM_SOPT4_FTM2CLKSEL ((uint32_t)0x04000000) // FlexTimer 2 External Clock Pin Select #define SIM_SOPT4_FTM1CLKSEL ((uint32_t)0x02000000) // FTM1 External Clock Pin Select #define SIM_SOPT4_FTM0CLKSEL ((uint32_t)0x01000000) // FlexTimer 0 External Clock Pin Select #define SIM_SOPT4_FTM2CH1SRC ((uint32_t)0x00400000) // FTM2 channel 1 input capture source select #define SIM_SOPT4_FTM2CH0SRC(n) ((uint32_t)(((n) & 3) << 20)) // FTM2 channel 0 input capture source select #define SIM_SOPT4_FTM1CH0SRC(n) ((uint32_t)(((n) & 3) << 18)) // FTM1 channel 0 input capture source select #define SIM_SOPT4_FTM3FLT0 ((uint32_t)0x00001000) // FTM3 Fault 0 Select #define SIM_SOPT4_FTM2FLT0 ((uint32_t)0x00000100) // FTM2 Fault 0 Select #define SIM_SOPT4_FTM1FLT0 ((uint32_t)0x00000010) // FTM1 Fault 0 Select #define SIM_SOPT4_FTM0FLT3 ((uint32_t)0x00000008) // FTM0 Fault 3 Select #define SIM_SOPT4_FTM0FLT2 ((uint32_t)0x00000004) // FTM0 Fault 2 Select #define SIM_SOPT4_FTM0FLT1 ((uint32_t)0x00000002) // FTM0 Fault 1 Select #define SIM_SOPT4_FTM0FLT0 ((uint32_t)0x00000001) // FTM0 Fault 0 Select #define SIM_SOPT5 (*(volatile uint32_t *)0x40048010) // System Options Register 5 #define SIM_SOPT5_LPUART0RXSRC(n) (uint32_t)(((n) & 3) << 18) // LPUART0 receive data source select #define SIM_SOPT5_LPUART0TXSRC(n) (uint32_t)(((n) & 3) << 16) // LPUART0 transmit data source select #define SIM_SOPT5_UART1RXSRC(n) (uint32_t)(((n) & 3) << 6) // UART 1 receive data source select #define SIM_SOPT5_UART1TXSRC(n) (uint32_t)(((n) & 3) << 4) // UART 1 transmit data source select #define SIM_SOPT5_UART0RXSRC(n) (uint32_t)(((n) & 3) << 2) // UART 0 receive data source select #define SIM_SOPT5_UART0TXSRC(n) (uint32_t)(((n) & 3) << 0) // UART 0 transmit data source select #define SIM_SOPT7 (*(volatile uint32_t *)0x40048018) // System Options Register 7 #define SIM_SOPT7_ADC1ALTTRGEN ((uint32_t)0x00008000) // ADC1 alternate trigger enable #define SIM_SOPT7_ADC1PRETRGSEL ((uint32_t)0x00001000) // ADC1 pre-trigger select #define SIM_SOPT7_ADC1TRGSEL(n) (uint32_t)(((n) & 15) << 8) // ADC1 trigger select #define SIM_SOPT7_ADC0ALTTRGEN ((uint32_t)0x00000080) // ADC0 alternate trigger enable #define SIM_SOPT7_ADC0PRETRGSEL ((uint32_t)0x00000010) // ADC0 pretrigger select #define SIM_SOPT7_ADC0TRGSEL(n) (uint32_t)(((n) & 15) << 0) // ADC0 trigger select #define SIM_SOPT8 (*(volatile uint32_t *)0x4004801C) // System Options Register 8 #define SIM_SOPT8_FTM3OCH7SRC ((uint32_t)0x80000000) // FTM3 channel 7 output source #define SIM_SOPT8_FTM3OCH6SRC ((uint32_t)0x40000000) // FTM3 channel 6 output source #define SIM_SOPT8_FTM3OCH5SRC ((uint32_t)0x20000000) // FTM3 channel 5 output source #define SIM_SOPT8_FTM3OCH4SRC ((uint32_t)0x10000000) // FTM3 channel 4 output source #define SIM_SOPT8_FTM3OCH3SRC ((uint32_t)0x08000000) // FTM3 channel 3 output source #define SIM_SOPT8_FTM3OCH2SRC ((uint32_t)0x04000000) // FTM3 channel 2 output source #define SIM_SOPT8_FTM3OCH1SRC ((uint32_t)0x02000000) // FTM3 channel 1 output source #define SIM_SOPT8_FTM3OCH0SRC ((uint32_t)0x01000000) // FTM3 channel 0 output source #define SIM_SOPT8_FTM0OCH7SRC ((uint32_t)0x00800000) // FTM0 channel 7 output source #define SIM_SOPT8_FTM0OCH6SRC ((uint32_t)0x00400000) // FTM0 channel 6 output source #define SIM_SOPT8_FTM0OCH5SRC ((uint32_t)0x00200000) // FTM0 channel 5 output source #define SIM_SOPT8_FTM0OCH4SRC ((uint32_t)0x00100000) // FTM0 channel 4 output source #define SIM_SOPT8_FTM0OCH3SRC ((uint32_t)0x00080000) // FTM0 channel 3 output source #define SIM_SOPT8_FTM0OCH2SRC ((uint32_t)0x00040000) // FTM0 channel 2 output source #define SIM_SOPT8_FTM0OCH1SRC ((uint32_t)0x00020000) // FTM0 channel 1 output source #define SIM_SOPT8_FTM0OCH0SRC ((uint32_t)0x00010000) // FTM0 channel 0 output source #define SIM_SOPT8_FTM3SYNCBIT ((uint32_t)0x00000008) // FTM3 Hardware Trigger 0 Software Synchronization #define SIM_SOPT8_FTM2SYNCBIT ((uint32_t)0x00000004) // FTM2 Hardware Trigger 0 Software Synchronization #define SIM_SOPT8_FTM1SYNCBIT ((uint32_t)0x00000002) // FTM1 Hardware Trigger 0 Software Synchronization #define SIM_SOPT8_FTM0SYNCBIT ((uint32_t)0x00000001) // FTM0 Hardware Trigger 0 Software Synchronization #define SIM_SOPT9 (*(volatile uint32_t *)0x40048020) // System Options Register 9 #define SIM_SOPT9_TPM2CLKSEL ((uint32_t)0x02000000) // TPM2 External Clock Pin Select #define SIM_SOPT9_TPM1CLKSEL ((uint32_t)0x01000000) // TPM1 External Clock Pin Select #define SIM_SOPT9_TPM2CH0SRC(n) (uint32_t)(((n) & 3) << 20) // TPM2 channel 0 input capture source select #define SIM_SOPT9_TPM1CH0SRC(n) (uint32_t)(((n) & 3) << 18) // TPM1 channel 0 input capture source select #define SIM_SDID (*(const uint32_t *)0x40048024) // System Device Identification Register #define SIM_SCGC1 (*(volatile uint32_t *)0x40048028) // System Clock Gating Control Register 1 #define SIM_SCGC1_UART5 ((uint32_t)0x00000800) // UART5 Clock Gate Control #define SIM_SCGC1_UART4 ((uint32_t)0x00000400) // UART4 Clock Gate Control #define SIM_SCGC1_I2C3 ((uint32_t)0x00000080) // I2C3 Clock Gate Control #define SIM_SCGC1_I2C2 ((uint32_t)0x00000040) // I2C2 Clock Gate Control #define SIM_SCGC2 (*(volatile uint32_t *)0x4004802C) // System Clock Gating Control Register 2 #if defined(KINETISK) #define SIM_SCGC2_DAC1 ((uint32_t)0x00002000) // DAC1 Clock Gate Control #define SIM_SCGC2_DAC0 ((uint32_t)0x00001000) // DAC0 Clock on APIS1 (base addr 400CC000) #define SIM_SCGC2_TPM2 ((uint32_t)0x00000400) // TPM2 Clock Gate Control #define SIM_SCGC2_TPM1 ((uint32_t)0x00000200) // TPM1 Clock Gate Control #define SIM_SCGC2_LPUART0 ((uint32_t)0x00000010) // LPUART0 Clock Gate Control #define SIM_SCGC2_ENET ((uint32_t)0x00000001) // Ethernet Clock Gate Control #endif #define SIM_SCGC3 (*(volatile uint32_t *)0x40048030) // System Clock Gating Control Register 3 #define SIM_SCGC3_ADC1 ((uint32_t)0x08000000) // ADC1 Clock Gate Control #define SIM_SCGC3_FTM3 ((uint32_t)0x02000000) // FTM3 Clock Gate Control #define SIM_SCGC3_FTM2 ((uint32_t)0x01000000) // FTM2 Clock on APIS1 (base addr 400B8000) #define SIM_SCGC3_SDHC ((uint32_t)0x00020000) // SDHC Clock Gate Control #define SIM_SCGC3_SPI2 ((uint32_t)0x00001000) // SPI2 Clock Gate Control #define SIM_SCGC3_FLEXCAN1 ((uint32_t)0x00000010) // FLEXCAN1 Clock Gate Control #define SIM_SCGC3_USBHSDCD ((uint32_t)0x00000008) // USBHSDCD Clock Gate Control #define SIM_SCGC3_USBHSPHY ((uint32_t)0x00000004) // USBHSPHY Clock Gate Control #define SIM_SCGC3_USBHS ((uint32_t)0x00000002) // USBHS Clock Gate Control //#define SIM_SCGC3_RNGA ((uint32_t)0x00000001) // RNGA Clock on APIS1 (base addr 400A0000) #define SIM_SCGC4 (*(volatile uint32_t *)0x40048034) // System Clock Gating Control Register 4 #define SIM_SCGC4_VREF ((uint32_t)0x00100000) // VREF Clock Gate Control #define SIM_SCGC4_CMP ((uint32_t)0x00080000) // Comparator Clock Gate Control #define SIM_SCGC4_USBOTG ((uint32_t)0x00040000) // USB Clock Gate Control #define SIM_SCGC4_UART3 ((uint32_t)0x00002000) // UART3 Clock Gate Control #define SIM_SCGC4_UART2 ((uint32_t)0x00001000) // UART2 Clock Gate Control #define SIM_SCGC4_UART1 ((uint32_t)0x00000800) // UART1 Clock Gate Control #define SIM_SCGC4_UART0 ((uint32_t)0x00000400) // UART0 Clock Gate Control #define SIM_SCGC4_I2C1 ((uint32_t)0x00000080) // I2C1 Clock Gate Control #define SIM_SCGC4_I2C0 ((uint32_t)0x00000040) // I2C0 Clock Gate Control #define SIM_SCGC4_CMT ((uint32_t)0x00000004) // CMT Clock Gate Control #define SIM_SCGC4_EWM ((uint32_t)0x00000002) // EWM Clock Gate Control #ifdef KINETISL #define SIM_SCGC4_SPI1 ((uint32_t)0x00800000) // #define SIM_SCGC4_SPI0 ((uint32_t)0x00400000) // #endif #define SIM_SCGC5 (*(volatile uint32_t *)0x40048038) // System Clock Gating Control Register 5 #define SIM_SCGC5_PORTE ((uint32_t)0x00002000) // Port E Clock Gate Control #define SIM_SCGC5_PORTD ((uint32_t)0x00001000) // Port D Clock Gate Control #define SIM_SCGC5_PORTC ((uint32_t)0x00000800) // Port C Clock Gate Control #define SIM_SCGC5_PORTB ((uint32_t)0x00000400) // Port B Clock Gate Control #define SIM_SCGC5_PORTA ((uint32_t)0x00000200) // Port A Clock Gate Control #define SIM_SCGC5_TSI ((uint32_t)0x00000020) // Touch Sense Input TSI Clock Gate Control #define SIM_SCGC5_LPTIMER ((uint32_t)0x00000001) // Low Power Timer Access Control #define SIM_SCGC6 (*(volatile uint32_t *)0x4004803C) // System Clock Gating Control Register 6 #if defined(KINETISL) #define SIM_SCGC6_DAC0 ((uint32_t)0x80000000) // DAC on Kinetis-L #define SIM_SCGC6_TPM2 ((uint32_t)0x04000000) // FTM2 Clock Gate Control #define SIM_SCGC6_TPM1 ((uint32_t)0x02000000) // FTM1 Clock Gate Control #define SIM_SCGC6_TPM0 ((uint32_t)0x01000000) // FTM0 Clock Gate Control #elif defined(KINETISK) //#define SIM_SCGC6_DAC0 ((uint32_t)0x80000000) // DAC0 Clock on APIS0 (base addr 4003F000) //#define SIM_SCGC6_FTM2 ((uint32_t)0x04000000) // FTM2 Clock on APIS0 (base addr 4003A000) #define SIM_SCGC6_PDB ((uint32_t)0x00400000) // PDB Clock Gate Control #define SIM_SCGC6_USBDCD ((uint32_t)0x00200000) // USB DCD Clock Gate Control #define SIM_SCGC6_SPI1 ((uint32_t)0x00002000) // SPI1 Clock Gate Control #define SIM_SCGC6_SPI0 ((uint32_t)0x00001000) // SPI0 Clock Gate Control #define SIM_SCGC6_RNGA ((uint32_t)0x00000200) // RNGA Clock on APIS0 (base addr 40029000) #define SIM_SCGC6_FLEXCAN0 ((uint32_t)0x00000010) // FlexCAN0 Clock Gate Control #define SIM_SCGC6_CRC ((uint32_t)0x00040000) // CRC Clock Gate Control #endif #define SIM_SCGC6_RTC ((uint32_t)0x20000000) // RTC Access #define SIM_SCGC6_ADC0 ((uint32_t)0x08000000) // ADC0 Clock Gate Control #define SIM_SCGC6_FTM1 ((uint32_t)0x02000000) // FTM1 Clock Gate Control #define SIM_SCGC6_FTM0 ((uint32_t)0x01000000) // FTM0 Clock Gate Control #define SIM_SCGC6_PIT ((uint32_t)0x00800000) // PIT Clock Gate Control #define SIM_SCGC6_I2S ((uint32_t)0x00008000) // I2S Clock Gate Control #define SIM_SCGC6_DMAMUX ((uint32_t)0x00000002) // DMA Mux Clock Gate Control #define SIM_SCGC6_FTFL ((uint32_t)0x00000001) // Flash Memory Clock Gate Control #define SIM_SCGC7 (*(volatile uint32_t *)0x40048040) // System Clock Gating Control Register 7 #if defined(KINETISK) #define SIM_SCGC7_SDRAMC ((uint32_t)0x00000008) // SDRAM Clock Gate Control #define SIM_SCGC7_MPU ((uint32_t)0x00000004) // MPU Clock Gate Control #define SIM_SCGC7_DMA ((uint32_t)0x00000002) // DMA Clock Gate Control #define SIM_SCGC7_FLEXBUS ((uint32_t)0x00000001) // FLEXBUS Clock Gate Control #elif defined(KINETISL) #define SIM_SCGC7_DMA ((uint32_t)0x00000100) // DMA Clock Gate Control #endif #define SIM_CLKDIV1 (*(volatile uint32_t *)0x40048044) // System Clock Divider Register 1 #define SIM_CLKDIV1_OUTDIV1(n) ((uint32_t)(((n) & 0x0F) << 28)) // divide value for the core/system clock #define SIM_CLKDIV1_OUTDIV2(n) ((uint32_t)(((n) & 0x0F) << 24)) // divide value for the peripheral clock #define SIM_CLKDIV1_OUTDIV3(n) ((uint32_t)(((n) & 0x0F) << 20)) // divide value for the flexbus clock #define SIM_CLKDIV1_OUTDIV4(n) ((uint32_t)(((n) & 0x0F) << 16)) // divide value for the flash clock #define SIM_CLKDIV1_OUTDIVS(n1, n2, n3, n4) \ (SIM_CLKDIV1_OUTDIV1(n1) | SIM_CLKDIV1_OUTDIV2(n2) | \ SIM_CLKDIV1_OUTDIV3(n3) | SIM_CLKDIV1_OUTDIV4(n4)) #define SIM_CLKDIV2 (*(volatile uint32_t *)0x40048048) // System Clock Divider Register 2 #define SIM_CLKDIV2_USBDIV(n) ((uint32_t)(((n) & 0x07) << 1)) #define SIM_CLKDIV2_USBFRAC ((uint32_t)0x01) #define SIM_FCFG1 (*(const uint32_t *)0x4004804C) // Flash Configuration Register 1 #define SIM_FCFG1_FLASHDOZE ((uint32_t)0x00000002) // Flash Doze (disabled during wait) #define SIM_FCFG1_FLASHDIS ((uint32_t)0x00000001) // Flash Disable #define SIM_FCFG2 (*(const uint32_t *)0x40048050) // Flash Configuration Register 2 #define SIM_UIDH (*(const uint32_t *)0x40048054) // Unique Identification Register High #define SIM_UIDMH (*(const uint32_t *)0x40048058) // Unique Identification Register Mid-High #define SIM_UIDML (*(const uint32_t *)0x4004805C) // Unique Identification Register Mid Low #define SIM_UIDL (*(const uint32_t *)0x40048060) // Unique Identification Register Low #define SIM_CLKDIV3 (*(volatile uint32_t *)0x40048064) // System Clock Divider Register 3 (LPUART & TPM) #define SIM_CLKDIV3_PLLFLLDIV(n) ((uint32_t)(((n) & 0x07) << 1)) #define SIM_CLKDIV3_PLLFLLFRAC ((uint32_t)0x01) #define SIM_CLKDIV4 (*(volatile uint32_t *)0x40048068) // System Clock Divider Register 4 (Trace) #define SIM_CLKDIV4_TRACEDIV(n) ((uint32_t)(((n) & 0x07) << 1)) #define SIM_CLKDIV4_TRACEFRAC ((uint32_t)0x01) #if defined(KINETISL) #define SIM_COPC (*(volatile uint32_t *)0x40048100) // COP Control Register (SIM_COPC) #define SIM_SRVCOP (*(volatile uint32_t *)0x40048104) // Service COP Register (SIM_SRVCOP) #endif // Reset Control Module (RCM) #define RCM_SRS0 (*(volatile uint8_t *)0x4007F000) // System Reset Status Register 0 #define RCM_SRS0_POR ((uint8_t)0x80) #define RCM_SRS0_PIN ((uint8_t)0x40) #define RCM_SRS0_WDOG ((uint8_t)0x20) #define RCM_SRS0_LOL ((uint8_t)0x08) #define RCM_SRS0_LOC ((uint8_t)0x04) #define RCM_SRS0_LVD ((uint8_t)0x02) #define RCM_SRS0_WAKEUP ((uint8_t)0x01) #define RCM_SRS1 (*(volatile uint8_t *)0x4007F001) // System Reset Status Register 1 #define RCM_SRS1_SACKERR ((uint8_t)0x20) #define RCM_SRS1_EZPT ((uint8_t)0x10) #define RCM_SRS1_MDM_AP ((uint8_t)0x08) #define RCM_SRS1_SW ((uint8_t)0x04) #define RCM_SRS1_LOCKUP ((uint8_t)0x02) #define RCM_SRS1_JTAG ((uint8_t)0x01) #define RCM_RPFC (*(volatile uint8_t *)0x4007F004) // Reset Pin Filter Control Register #define RCM_RPFW (*(volatile uint8_t *)0x4007F005) // Reset Pin Filter Width Register #define RCM_MR (*(volatile uint8_t *)0x4007F007) // Mode Register #define RCM_SSRS0 (*(volatile uint8_t *)0x4007F008) // Sticky System Reset Status Register 0 #define RCM_SSRS1 (*(volatile uint8_t *)0x4007F009) // Sticky System Reset Status Register 0 // System Mode Controller #define SMC_PMPROT (*(volatile uint8_t *)0x4007E000) // Power Mode Protection Register #define SMC_PMPROT_AHSRUN ((uint8_t)0x80) // Allow high speed run mode #define SMC_PMPROT_AVLP ((uint8_t)0x20) // Allow very low power modes #define SMC_PMPROT_ALLS ((uint8_t)0x08) // Allow low leakage stop mode #define SMC_PMPROT_AVLLS ((uint8_t)0x02) // Allow very low leakage stop mode #define SMC_PMCTRL (*(volatile uint8_t *)0x4007E001) // Power Mode Control Register #define SMC_PMCTRL_LPWUI ((uint8_t)0x80) // Low Power Wake Up on Interrupt #define SMC_PMCTRL_RUNM(n) ((uint8_t)(((n) & 0x03) << 5)) // Run Mode Control #define SMC_PMCTRL_STOPA ((uint8_t)0x08) // Stop Aborted #define SMC_PMCTRL_STOPM(n) ((uint8_t)((n) & 0x07)) // Stop Mode Control #define SMC_VLLSCTRL (*(volatile uint8_t *)0x4007E002) // VLLS Control Register #define SMC_VLLSCTRL_PORPO ((uint8_t)0x20) // POR Power Option #define SMC_VLLSCTRL_VLLSM(n) ((uint8_t)((n) & 0x07)) // VLLS Mode Control #define SMC_PMSTAT (*(volatile uint8_t *)0x4007E003) // Power Mode Status Register #define SMC_PMSTAT_RUN ((uint8_t)0x01) // Current power mode is RUN #define SMC_PMSTAT_STOP ((uint8_t)0x02) // Current power mode is STOP #define SMC_PMSTAT_VLPR ((uint8_t)0x04) // Current power mode is VLPR #define SMC_PMSTAT_VLPW ((uint8_t)0x08) // Current power mode is VLPW #define SMC_PMSTAT_VLPS ((uint8_t)0x10) // Current power mode is VLPS #define SMC_PMSTAT_LLS ((uint8_t)0x20) // Current power mode is LLS #define SMC_PMSTAT_VLLS ((uint8_t)0x40) // Current power mode is VLLS #define SMC_PMSTAT_HSRUN ((uint8_t)0x80) // Current power mode is HSRUN // Power Management Controller #define PMC_LVDSC1 (*(volatile uint8_t *)0x4007D000) // Low Voltage Detect Status And Control 1 register #define PMC_LVDSC1_LVDF ((uint8_t)0x80) // Low-Voltage Detect Flag #define PMC_LVDSC1_LVDACK ((uint8_t)0x40) // Low-Voltage Detect Acknowledge #define PMC_LVDSC1_LVDIE ((uint8_t)0x20) // Low-Voltage Detect Interrupt Enable #define PMC_LVDSC1_LVDRE ((uint8_t)0x10) // Low-Voltage Detect Reset Enable #define PMC_LVDSC1_LVDV(n) ((uint8_t)((n) & 0x03)) // Low-Voltage Detect Voltage Select #define PMC_LVDSC2 (*(volatile uint8_t *)0x4007D001) // Low Voltage Detect Status And Control 2 register #define PMC_LVDSC2_LVWF ((uint8_t)0x80) // Low-Voltage Warning Flag #define PMC_LVDSC2_LVWACK ((uint8_t)0x40) // Low-Voltage Warning Acknowledge #define PMC_LVDSC2_LVWIE ((uint8_t)0x20) // Low-Voltage Warning Interrupt Enable #define PMC_LVDSC2_LVWV(n) ((uint8_t)((n) & 0x03)) // Low-Voltage Warning Voltage Select #define PMC_REGSC (*(volatile uint8_t *)0x4007D002) // Regulator Status And Control register #define PMC_REGSC_BGEN ((uint8_t)0x10) // Bandgap Enable In VLPx Operation #define PMC_REGSC_ACKISO ((uint8_t)0x08) // Acknowledge Isolation #define PMC_REGSC_REGONS ((uint8_t)0x04) // Regulator In Run Regulation Status #define PMC_REGSC_BGBE ((uint8_t)0x01) // Bandgap Buffer Enable // Low-Leakage Wakeup Unit (LLWU) #if defined(HAS_KINETIS_LLWU_32CH) #define LLWU_PE1 (*(volatile uint8_t *)0x4007C000) // LLWU Pin Enable 1 register #define LLWU_PE1_WUPE0(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P0 #define LLWU_PE1_WUPE1(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P1 #define LLWU_PE1_WUPE2(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P2 #define LLWU_PE1_WUPE3(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P3 #define LLWU_PE2 (*(volatile uint8_t *)0x4007C001) // LLWU Pin Enable 2 register #define LLWU_PE2_WUPE4(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P4 #define LLWU_PE2_WUPE5(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P5 #define LLWU_PE2_WUPE6(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P6 #define LLWU_PE2_WUPE7(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P7 #define LLWU_PE3 (*(volatile uint8_t *)0x4007C002) // LLWU Pin Enable 3 register #define LLWU_PE3_WUPE8(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P8 #define LLWU_PE3_WUPE9(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P9 #define LLWU_PE3_WUPE10(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P10 #define LLWU_PE3_WUPE11(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P11 #define LLWU_PE4 (*(volatile uint8_t *)0x4007C003) // LLWU Pin Enable 4 register #define LLWU_PE4_WUPE12(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P12 #define LLWU_PE4_WUPE13(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P13 #define LLWU_PE4_WUPE14(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P14 #define LLWU_PE4_WUPE15(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P15 #define LLWU_PE5 (*(volatile uint8_t *)0x4007C004) // LLWU Pin Enable 5 register #define LLWU_PE5_WUPE19(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P19 #define LLWU_PE5_WUPE18(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P18 #define LLWU_PE5_WUPE17(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P17 #define LLWU_PE5_WUPE16(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P16 #define LLWU_PE6 (*(volatile uint8_t *)0x4007C005) // LLWU Pin Enable 6 register #define LLWU_PE6_WUPE23(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P23 #define LLWU_PE6_WUPE22(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P22 #define LLWU_PE6_WUPE21(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P21 #define LLWU_PE6_WUPE20(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P20 #define LLWU_PE7 (*(volatile uint8_t *)0x4007C006) // LLWU Pin Enable 7 register #define LLWU_PE7_WUPE27(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P27 #define LLWU_PE7_WUPE26(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P26 #define LLWU_PE7_WUPE25(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P25 #define LLWU_PE7_WUPE24(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P24 #define LLWU_PE8 (*(volatile uint8_t *)0x4007C007) // LLWU Pin Enable 8 register #define LLWU_PE8_WUPE31(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P31 #define LLWU_PE8_WUPE30(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P30 #define LLWU_PE8_WUPE29(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P29 #define LLWU_PE8_WUPE28(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P28 #define LLWU_ME (*(volatile uint8_t *)0x4007C008) // LLWU Module Enable register #define LLWU_ME_WUME0 ((uint8_t)0x01) // Wakeup Module Enable For Module 0 #define LLWU_ME_WUME1 ((uint8_t)0x02) // Wakeup Module Enable For Module 1 #define LLWU_ME_WUME2 ((uint8_t)0x04) // Wakeup Module Enable For Module 2 #define LLWU_ME_WUME3 ((uint8_t)0x08) // Wakeup Module Enable For Module 3 #define LLWU_ME_WUME4 ((uint8_t)0x10) // Wakeup Module Enable For Module 4 #define LLWU_ME_WUME5 ((uint8_t)0x20) // Wakeup Module Enable For Module 5 #define LLWU_ME_WUME6 ((uint8_t)0x40) // Wakeup Module Enable For Module 6 #define LLWU_ME_WUME7 ((uint8_t)0x80) // Wakeup Module Enable For Module 7 #define LLWU_PF1 (*(volatile uint8_t *)0x4007C009) // LLWU Pin Flag 1 register #define LLWU_PF1_WUF0 ((uint8_t)0x01) // Wakeup Flag For LLWU_P0 #define LLWU_PF1_WUF1 ((uint8_t)0x02) // Wakeup Flag For LLWU_P1 #define LLWU_PF1_WUF2 ((uint8_t)0x04) // Wakeup Flag For LLWU_P2 #define LLWU_PF1_WUF3 ((uint8_t)0x08) // Wakeup Flag For LLWU_P3 #define LLWU_PF1_WUF4 ((uint8_t)0x10) // Wakeup Flag For LLWU_P4 #define LLWU_PF1_WUF5 ((uint8_t)0x20) // Wakeup Flag For LLWU_P5 #define LLWU_PF1_WUF6 ((uint8_t)0x40) // Wakeup Flag For LLWU_P6 #define LLWU_PF1_WUF7 ((uint8_t)0x80) // Wakeup Flag For LLWU_P7 #define LLWU_PF2 (*(volatile uint8_t *)0x4007C00A) // LLWU Pin Flag 2 register #define LLWU_PF2_WUF8 ((uint8_t)0x01) // Wakeup Flag For LLWU_P8 #define LLWU_PF2_WUF9 ((uint8_t)0x02) // Wakeup Flag For LLWU_P9 #define LLWU_PF2_WUF10 ((uint8_t)0x04) // Wakeup Flag For LLWU_P10 #define LLWU_PF2_WUF11 ((uint8_t)0x08) // Wakeup Flag For LLWU_P11 #define LLWU_PF2_WUF12 ((uint8_t)0x10) // Wakeup Flag For LLWU_P12 #define LLWU_PF2_WUF13 ((uint8_t)0x20) // Wakeup Flag For LLWU_P13 #define LLWU_PF2_WUF14 ((uint8_t)0x40) // Wakeup Flag For LLWU_P14 #define LLWU_PF2_WUF15 ((uint8_t)0x80) // Wakeup Flag For LLWU_P15 #define LLWU_PF3 (*(volatile uint8_t *)0x4007C00B) // LLWU Pin Flag 3 register #define LLWU_PF3_WUF16 ((uint8_t)0x01) // Wakeup Flag For LLWU_P16 #define LLWU_PF3_WUF17 ((uint8_t)0x02) // Wakeup Flag For LLWU_P17 #define LLWU_PF3_WUF18 ((uint8_t)0x04) // Wakeup Flag For LLWU_P18 #define LLWU_PF3_WUF19 ((uint8_t)0x08) // Wakeup Flag For LLWU_P19 #define LLWU_PF3_WUF20 ((uint8_t)0x10) // Wakeup Flag For LLWU_P20 #define LLWU_PF3_WUF21 ((uint8_t)0x20) // Wakeup Flag For LLWU_P21 #define LLWU_PF3_WUF22 ((uint8_t)0x40) // Wakeup Flag For LLWU_P22 #define LLWU_PF3_WUF23 ((uint8_t)0x80) // Wakeup Flag For LLWU_P23 #define LLWU_PF4 (*(volatile uint8_t *)0x4007C00C) // LLWU Pin Flag 4 register #define LLWU_PF4_WUF31 ((uint8_t)0x01) // Wakeup Flag For LLWU_P31 #define LLWU_PF4_WUF30 ((uint8_t)0x02) // Wakeup Flag For LLWU_P30 #define LLWU_PF4_WUF29 ((uint8_t)0x04) // Wakeup Flag For LLWU_P29 #define LLWU_PF4_WUF28 ((uint8_t)0x08) // Wakeup Flag For LLWU_P28 #define LLWU_PF4_WUF27 ((uint8_t)0x10) // Wakeup Flag For LLWU_P27 #define LLWU_PF4_WUF26 ((uint8_t)0x20) // Wakeup Flag For LLWU_P26 #define LLWU_PF4_WUF25 ((uint8_t)0x40) // Wakeup Flag For LLWU_P25 #define LLWU_PF4_WUF24 ((uint8_t)0x80) // Wakeup Flag For LLWU_P24 #define LLWU_MF5 (*(volatile uint8_t *)0x4007C00D) // LLWU Module Flag 5 register #define LLWU_MF5_MWUF0 ((uint8_t)0x01) // Wakeup flag For module 0 #define LLWU_MF5_MWUF1 ((uint8_t)0x02) // Wakeup flag For module 1 #define LLWU_MF5_MWUF2 ((uint8_t)0x04) // Wakeup flag For module 2 #define LLWU_MF5_MWUF3 ((uint8_t)0x08) // Wakeup flag For module 3 #define LLWU_MF5_MWUF4 ((uint8_t)0x10) // Wakeup flag For module 4 #define LLWU_MF5_MWUF5 ((uint8_t)0x20) // Wakeup flag For module 5 #define LLWU_MF5_MWUF6 ((uint8_t)0x40) // Wakeup flag For module 6 #define LLWU_MF5_MWUF7 ((uint8_t)0x80) // Wakeup flag For module 7 #define LLWU_FILT1 (*(volatile uint8_t *)0x4007C00E) // LLWU Pin Filter 1 register #define LLWU_FILT2 (*(volatile uint8_t *)0x4007C00F) // LLWU Pin Filter 2 register #define LLWU_FILT3 (*(volatile uint8_t *)0x4007C010) // LLWU Pin Filter 3 register #define LLWU_FILT4 (*(volatile uint8_t *)0x4007C011) // LLWU Pin Filter 4 register #elif defined(HAS_KINETIS_LLWU_16CH) #define LLWU_PE1 (*(volatile uint8_t *)0x4007C000) // LLWU Pin Enable 1 register #define LLWU_PE1_WUPE0(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P0 #define LLWU_PE1_WUPE1(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P1 #define LLWU_PE1_WUPE2(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P2 #define LLWU_PE1_WUPE3(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P3 #define LLWU_PE2 (*(volatile uint8_t *)0x4007C001) // LLWU Pin Enable 2 register #define LLWU_PE2_WUPE4(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P4 #define LLWU_PE2_WUPE5(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P5 #define LLWU_PE2_WUPE6(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P6 #define LLWU_PE2_WUPE7(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P7 #define LLWU_PE3 (*(volatile uint8_t *)0x4007C002) // LLWU Pin Enable 3 register #define LLWU_PE3_WUPE8(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P8 #define LLWU_PE3_WUPE9(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P9 #define LLWU_PE3_WUPE10(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P10 #define LLWU_PE3_WUPE11(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P11 #define LLWU_PE4 (*(volatile uint8_t *)0x4007C003) // LLWU Pin Enable 4 register #define LLWU_PE4_WUPE12(n) ((uint8_t)((n) & 0x03)) // Wakeup Pin Enable For LLWU_P12 #define LLWU_PE4_WUPE13(n) ((uint8_t)(((n) & 0x03) << 2)) // Wakeup Pin Enable For LLWU_P13 #define LLWU_PE4_WUPE14(n) ((uint8_t)(((n) & 0x03) << 4)) // Wakeup Pin Enable For LLWU_P14 #define LLWU_PE4_WUPE15(n) ((uint8_t)(((n) & 0x03) << 6)) // Wakeup Pin Enable For LLWU_P15 #define LLWU_ME (*(volatile uint8_t *)0x4007C004) // LLWU Module Enable register #define LLWU_ME_WUME0 ((uint8_t)0x01) // Wakeup Module Enable For Module 0 #define LLWU_ME_WUME1 ((uint8_t)0x02) // Wakeup Module Enable For Module 1 #define LLWU_ME_WUME2 ((uint8_t)0x04) // Wakeup Module Enable For Module 2 #define LLWU_ME_WUME3 ((uint8_t)0x08) // Wakeup Module Enable For Module 3 #define LLWU_ME_WUME4 ((uint8_t)0x10) // Wakeup Module Enable For Module 4 #define LLWU_ME_WUME5 ((uint8_t)0x20) // Wakeup Module Enable For Module 5 #define LLWU_ME_WUME6 ((uint8_t)0x40) // Wakeup Module Enable For Module 6 #define LLWU_ME_WUME7 ((uint8_t)0x80) // Wakeup Module Enable For Module 7 #define LLWU_F1 (*(volatile uint8_t *)0x4007C005) // LLWU Flag 1 register #define LLWU_F1_WUF0 ((uint8_t)0x01) // Wakeup Flag For LLWU_P0 #define LLWU_F1_WUF1 ((uint8_t)0x02) // Wakeup Flag For LLWU_P1 #define LLWU_F1_WUF2 ((uint8_t)0x04) // Wakeup Flag For LLWU_P2 #define LLWU_F1_WUF3 ((uint8_t)0x08) // Wakeup Flag For LLWU_P3 #define LLWU_F1_WUF4 ((uint8_t)0x10) // Wakeup Flag For LLWU_P4 #define LLWU_F1_WUF5 ((uint8_t)0x20) // Wakeup Flag For LLWU_P5 #define LLWU_F1_WUF6 ((uint8_t)0x40) // Wakeup Flag For LLWU_P6 #define LLWU_F1_WUF7 ((uint8_t)0x80) // Wakeup Flag For LLWU_P7 #define LLWU_F2 (*(volatile uint8_t *)0x4007C006) // LLWU Flag 2 register #define LLWU_F2_WUF8 ((uint8_t)0x01) // Wakeup Flag For LLWU_P8 #define LLWU_F2_WUF9 ((uint8_t)0x02) // Wakeup Flag For LLWU_P9 #define LLWU_F2_WUF10 ((uint8_t)0x04) // Wakeup Flag For LLWU_P10 #define LLWU_F2_WUF11 ((uint8_t)0x08) // Wakeup Flag For LLWU_P11 #define LLWU_F2_WUF12 ((uint8_t)0x10) // Wakeup Flag For LLWU_P12 #define LLWU_F2_WUF13 ((uint8_t)0x20) // Wakeup Flag For LLWU_P13 #define LLWU_F2_WUF14 ((uint8_t)0x40) // Wakeup Flag For LLWU_P14 #define LLWU_F2_WUF15 ((uint8_t)0x80) // Wakeup Flag For LLWU_P15 #define LLWU_F3 (*(volatile uint8_t *)0x4007C007) // LLWU Flag 3 register #define LLWU_F3_MWUF0 ((uint8_t)0x01) // Wakeup flag For module 0 #define LLWU_F3_MWUF1 ((uint8_t)0x02) // Wakeup flag For module 1 #define LLWU_F3_MWUF2 ((uint8_t)0x04) // Wakeup flag For module 2 #define LLWU_F3_MWUF3 ((uint8_t)0x08) // Wakeup flag For module 3 #define LLWU_F3_MWUF4 ((uint8_t)0x10) // Wakeup flag For module 4 #define LLWU_F3_MWUF5 ((uint8_t)0x20) // Wakeup flag For module 5 #define LLWU_F3_MWUF6 ((uint8_t)0x40) // Wakeup flag For module 6 #define LLWU_F3_MWUF7 ((uint8_t)0x80) // Wakeup flag For module 7 #define LLWU_FILT1 (*(volatile uint8_t *)0x4007C008) // LLWU Pin Filter 1 register #define LLWU_FILT2 (*(volatile uint8_t *)0x4007C009) // LLWU Pin Filter 2 register #define LLWU_RST (*(volatile uint8_t *)0x4007C00A) // LLWU Reset Enable register #endif // Miscellaneous Control Module (MCM) #if defined(KINETISK) #define MCM_PLASC (*(volatile uint16_t *)0xE0080008) // Crossbar Switch (AXBS) Slave Configuration #define MCM_PLAMC (*(volatile uint16_t *)0xE008000A) // Crossbar Switch (AXBS) Master Configuration #define MCM_PLACR (*(volatile uint32_t *)0xE008000C) // Crossbar Switch (AXBS) Control Register (MK20DX128) #define MCM_PLACR_ARG ((uint32_t)0x00000200) // Arbitration select, 0=fixed, 1=round-robin #define MCM_CR (*(volatile uint32_t *)0xE008000C) // RAM arbitration control register (MK20DX256) #define MCM_CR_SRAMLWP ((uint32_t)0x40000000) // SRAM_L write protect #define MCM_CR_SRAMLAP(n) ((uint32_t)(((n) & 0x03) << 28)) // SRAM_L priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA #define MCM_CR_SRAMUWP ((uint32_t)0x04000000) // SRAM_U write protect #define MCM_CR_SRAMUAP(n) ((uint32_t)(((n) & 0x03) << 24)) // SRAM_U priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA #define MCM_ISCR (*(volatile uint32_t *)0xE0080010) // Interrupt Status Register #define MCM_ETBCC (*(volatile uint32_t *)0xE0080014) // ETB Counter Control register #define MCM_ETBRL (*(volatile uint32_t *)0xE0080018) // ETB Reload register #define MCM_ETBCNT (*(volatile uint32_t *)0xE008001C) // ETB Counter Value register #define MCM_FADR (*(volatile uint32_t *)0xE0080020) // Fault address register #define MCM_FATR (*(volatile uint32_t *)0xE0080024) // Fault attributes register #define MCM_FDR (*(volatile uint32_t *)0xE0080028) // Fault data register #define MCM_PID (*(volatile uint32_t *)0xE0080030) // Process ID register #define MCM_CPO (*(volatile uint32_t *)0xE0080040) // Compute Operation Control Register #elif defined(KINETISL) #define MCM_PLASC (*(volatile uint16_t *)0xF0003008) // Crossbar Switch (AXBS) Slave Configuration #define MCM_PLAMC (*(volatile uint16_t *)0xF000300A) // Crossbar Switch (AXBS) Master Configuration #define MCM_PLACR (*(volatile uint32_t *)0xF000300C) // Platform Control Register #define MCM_PLACR_ESFC ((uint32_t)0x00010000) // Enable Stalling Flash Controller #define MCM_PLACR_DFCS ((uint32_t)0x00008000) // Disable Flash Controller Speculation #define MCM_PLACR_EFDS ((uint32_t)0x00004000) // Enable Flash Data Speculation #define MCM_PLACR_DFCC ((uint32_t)0x00002000) // Disable Flash Controller Cache #define MCM_PLACR_DFCIC ((uint32_t)0x00001000) // Disable Flash Controller Instruction Caching #define MCM_PLACR_DFCDA ((uint32_t)0x00000800) // Disable Flash Controller Data Caching #define MCM_PLACR_CFCC ((uint32_t)0x00000400) // Clear Flash Controller Cache #define MCM_PLACR_ARB ((uint32_t)0x00000200) // Arbitration select #define MCM_CPO (*(volatile uint32_t *)0xF0003040) // Compute Operation Control Register #endif // Crossbar Switch (AXBS) - not programmable on MK20DX128 & Kinetis-L #define AXBS_PRS0 (*(volatile uint32_t *)0x40004000) // Priority Registers Slave 0 #define AXBS_CRS0 (*(volatile uint32_t *)0x40004010) // Control Register 0 #define AXBS_PRS1 (*(volatile uint32_t *)0x40004100) // Priority Registers Slave 1 #define AXBS_CRS1 (*(volatile uint32_t *)0x40004110) // Control Register 1 #define AXBS_PRS2 (*(volatile uint32_t *)0x40004200) // Priority Registers Slave 2 #define AXBS_CRS2 (*(volatile uint32_t *)0x40004210) // Control Register 2 #define AXBS_PRS3 (*(volatile uint32_t *)0x40004300) // Priority Registers Slave 3 #define AXBS_CRS3 (*(volatile uint32_t *)0x40004310) // Control Register 3 #define AXBS_PRS4 (*(volatile uint32_t *)0x40004400) // Priority Registers Slave 4 #define AXBS_CRS4 (*(volatile uint32_t *)0x40004410) // Control Register 4 #define AXBS_PRS5 (*(volatile uint32_t *)0x40004500) // Priority Registers Slave 5 #define AXBS_CRS5 (*(volatile uint32_t *)0x40004510) // Control Register 5 #define AXBS_PRS6 (*(volatile uint32_t *)0x40004600) // Priority Registers Slave 6 #define AXBS_CRS6 (*(volatile uint32_t *)0x40004610) // Control Register 6 #define AXBS_PRS7 (*(volatile uint32_t *)0x40004700) // Priority Registers Slave 7 #define AXBS_CRS7 (*(volatile uint32_t *)0x40004710) // Control Register 7 #define AXBS_MGPCR0 (*(volatile uint32_t *)0x40004800) // Master 0 General Purpose Control Register #define AXBS_MGPCR1 (*(volatile uint32_t *)0x40004900) // Master 1 General Purpose Control Register #define AXBS_MGPCR2 (*(volatile uint32_t *)0x40004A00) // Master 2 General Purpose Control Register #define AXBS_MGPCR3 (*(volatile uint32_t *)0x40004B00) // Master 3 General Purpose Control Register #define AXBS_MGPCR4 (*(volatile uint32_t *)0x40004C00) // Master 4 General Purpose Control Register #define AXBS_MGPCR5 (*(volatile uint32_t *)0x40004D00) // Master 5 General Purpose Control Register #define AXBS_MGPCR6 (*(volatile uint32_t *)0x40004E00) // Master 6 General Purpose Control Register #define AXBS_MGPCR7 (*(volatile uint32_t *)0x40004F00) // Master 7 General Purpose Control Register #define AXBS_CRS_READONLY ((uint32_t)0x80000000) #define AXBS_CRS_HALTLOWPRIORITY ((uint32_t)0x40000000) #define AXBS_CRS_ARB_FIXED ((uint32_t)0x00000000) #define AXBS_CRS_ARB_ROUNDROBIN ((uint32_t)0x00010000) #define AXBS_CRS_PARK_FIXED ((uint32_t)0x00000000) #define AXBS_CRS_PARK_PREVIOUS ((uint32_t)0x00000010) #define AXBS_CRS_PARK_NONE ((uint32_t)0x00000020) #define AXBS_CRS_PARK(n) ((uint32_t)(((n) & 7) << 0)) // Peripheral Bridge (AIPS-Lite) #define AIPS0_MPRA (*(volatile uint32_t *)0x40000000) // Master Privilege Register A #define AIPS0_PACRA (*(volatile uint32_t *)0x40000020) // Peripheral Access Control Register #define AIPS0_PACRB (*(volatile uint32_t *)0x40000024) // Peripheral Access Control Register #define AIPS0_PACRC (*(volatile uint32_t *)0x40000028) // Peripheral Access Control Register #define AIPS0_PACRD (*(volatile uint32_t *)0x4000002C) // Peripheral Access Control Register #define AIPS0_PACRE (*(volatile uint32_t *)0x40000040) // Peripheral Access Control Register #define AIPS0_PACRF (*(volatile uint32_t *)0x40000044) // Peripheral Access Control Register #define AIPS0_PACRG (*(volatile uint32_t *)0x40000048) // Peripheral Access Control Register #define AIPS0_PACRH (*(volatile uint32_t *)0x4000004C) // Peripheral Access Control Register #define AIPS0_PACRI (*(volatile uint32_t *)0x40000050) // Peripheral Access Control Register #define AIPS0_PACRJ (*(volatile uint32_t *)0x40000054) // Peripheral Access Control Register #define AIPS0_PACRK (*(volatile uint32_t *)0x40000058) // Peripheral Access Control Register #define AIPS0_PACRL (*(volatile uint32_t *)0x4000005C) // Peripheral Access Control Register #define AIPS0_PACRM (*(volatile uint32_t *)0x40000060) // Peripheral Access Control Register #define AIPS0_PACRN (*(volatile uint32_t *)0x40000064) // Peripheral Access Control Register #define AIPS0_PACRO (*(volatile uint32_t *)0x40000068) // Peripheral Access Control Register #define AIPS0_PACRP (*(volatile uint32_t *)0x4000006C) // Peripheral Access Control Register #define AIPS1_MPRA (*(volatile uint32_t *)0x40080000) // Master Privilege Register A #define AIPS1_PACRA (*(volatile uint32_t *)0x40080020) // Peripheral Access Control Register #define AIPS1_PACRB (*(volatile uint32_t *)0x40080024) // Peripheral Access Control Register #define AIPS1_PACRC (*(volatile uint32_t *)0x40080028) // Peripheral Access Control Register #define AIPS1_PACRD (*(volatile uint32_t *)0x4008002C) // Peripheral Access Control Register #define AIPS1_PACRE (*(volatile uint32_t *)0x40080040) // Peripheral Access Control Register #define AIPS1_PACRF (*(volatile uint32_t *)0x40080044) // Peripheral Access Control Register #define AIPS1_PACRG (*(volatile uint32_t *)0x40080048) // Peripheral Access Control Register #define AIPS1_PACRH (*(volatile uint32_t *)0x4008004C) // Peripheral Access Control Register #define AIPS1_PACRI (*(volatile uint32_t *)0x40080050) // Peripheral Access Control Register #define AIPS1_PACRJ (*(volatile uint32_t *)0x40080054) // Peripheral Access Control Register #define AIPS1_PACRK (*(volatile uint32_t *)0x40080058) // Peripheral Access Control Register #define AIPS1_PACRL (*(volatile uint32_t *)0x4008005C) // Peripheral Access Control Register #define AIPS1_PACRM (*(volatile uint32_t *)0x40080060) // Peripheral Access Control Register #define AIPS1_PACRN (*(volatile uint32_t *)0x40080064) // Peripheral Access Control Register #define AIPS1_PACRO (*(volatile uint32_t *)0x40080068) // Peripheral Access Control Register #define AIPS1_PACRP (*(volatile uint32_t *)0x4008006C) // Peripheral Access Control Register // Memory Protection Unit (MPU) #if defined(HAS_KINETIS_MPU) #define MPU_CESR (*(volatile uint32_t *)0x4000D000) // Control/Error Status Register #define MPU_EAR0 (*(volatile uint32_t *)0x4000D010) // Error Address Register, slave port 0 #define MPU_EDR0 (*(volatile uint32_t *)0x4000D014) // Error Detail Register, slave port 0 #define MPU_EAR1 (*(volatile uint32_t *)0x4000D018) // Error Address Register, slave port 1 #define MPU_EDR1 (*(volatile uint32_t *)0x4000D01C) // Error Detail Register, slave port 1 #define MPU_EAR2 (*(volatile uint32_t *)0x4000D020) // Error Address Register, slave port 2 #define MPU_EDR2 (*(volatile uint32_t *)0x4000D024) // Error Detail Register, slave port 2 #define MPU_EAR3 (*(volatile uint32_t *)0x4000D028) // Error Address Register, slave port 3 #define MPU_EDR3 (*(volatile uint32_t *)0x4000D02C) // Error Detail Register, slave port 3 #define MPU_EAR4 (*(volatile uint32_t *)0x4000D030) // Error Address Register, slave port 4 #define MPU_EDR4 (*(volatile uint32_t *)0x4000D034) // Error Detail Register, slave port 4 #define MPU_RGD0_WORD0 (*(volatile uint32_t *)0x4000D400) // Region Descriptor 0, Word 0 #define MPU_RGD0_WORD1 (*(volatile uint32_t *)0x4000D404) // Region Descriptor 0, Word 1 #define MPU_RGD0_WORD2 (*(volatile uint32_t *)0x4000D408) // Region Descriptor 0, Word 2 #define MPU_RGD0_WORD3 (*(volatile uint32_t *)0x4000D40C) // Region Descriptor 0, Word 3 #define MPU_RGD1_WORD0 (*(volatile uint32_t *)0x4000D410) // Region Descriptor 1, Word 0 #define MPU_RGD1_WORD1 (*(volatile uint32_t *)0x4000D414) // Region Descriptor 1, Word 1 #define MPU_RGD1_WORD2 (*(volatile uint32_t *)0x4000D418) // Region Descriptor 1, Word 2 #define MPU_RGD1_WORD3 (*(volatile uint32_t *)0x4000D41C) // Region Descriptor 1, Word 3 #define MPU_RGD2_WORD0 (*(volatile uint32_t *)0x4000D420) // Region Descriptor 2, Word 0 #define MPU_RGD2_WORD1 (*(volatile uint32_t *)0x4000D424) // Region Descriptor 2, Word 1 #define MPU_RGD2_WORD2 (*(volatile uint32_t *)0x4000D428) // Region Descriptor 2, Word 2 #define MPU_RGD2_WORD3 (*(volatile uint32_t *)0x4000D42C) // Region Descriptor 2, Word 3 #define MPU_RGD3_WORD0 (*(volatile uint32_t *)0x4000D430) // Region Descriptor 3, Word 0 #define MPU_RGD3_WORD1 (*(volatile uint32_t *)0x4000D434) // Region Descriptor 3, Word 1 #define MPU_RGD3_WORD2 (*(volatile uint32_t *)0x4000D438) // Region Descriptor 3, Word 2 #define MPU_RGD3_WORD3 (*(volatile uint32_t *)0x4000D43C) // Region Descriptor 3, Word 3 #define MPU_RGD4_WORD0 (*(volatile uint32_t *)0x4000D440) // Region Descriptor 4, Word 0 #define MPU_RGD4_WORD1 (*(volatile uint32_t *)0x4000D444) // Region Descriptor 4, Word 1 #define MPU_RGD4_WORD2 (*(volatile uint32_t *)0x4000D448) // Region Descriptor 4, Word 2 #define MPU_RGD4_WORD3 (*(volatile uint32_t *)0x4000D44C) // Region Descriptor 4, Word 3 #define MPU_RGD5_WORD0 (*(volatile uint32_t *)0x4000D450) // Region Descriptor 5, Word 0 #define MPU_RGD5_WORD1 (*(volatile uint32_t *)0x4000D454) // Region Descriptor 5, Word 1 #define MPU_RGD5_WORD2 (*(volatile uint32_t *)0x4000D458) // Region Descriptor 5, Word 2 #define MPU_RGD5_WORD3 (*(volatile uint32_t *)0x4000D45C) // Region Descriptor 5, Word 3 #define MPU_RGD6_WORD0 (*(volatile uint32_t *)0x4000D460) // Region Descriptor 6, Word 0 #define MPU_RGD6_WORD1 (*(volatile uint32_t *)0x4000D464) // Region Descriptor 6, Word 1 #define MPU_RGD6_WORD2 (*(volatile uint32_t *)0x4000D468) // Region Descriptor 6, Word 2 #define MPU_RGD6_WORD3 (*(volatile uint32_t *)0x4000D46C) // Region Descriptor 6, Word 3 #define MPU_RGD7_WORD0 (*(volatile uint32_t *)0x4000D470) // Region Descriptor 7, Word 0 #define MPU_RGD7_WORD1 (*(volatile uint32_t *)0x4000D474) // Region Descriptor 7, Word 1 #define MPU_RGD7_WORD2 (*(volatile uint32_t *)0x4000D478) // Region Descriptor 7, Word 2 #define MPU_RGD7_WORD3 (*(volatile uint32_t *)0x4000D47C) // Region Descriptor 7, Word 3 #define MPU_RGD8_WORD0 (*(volatile uint32_t *)0x4000D480) // Region Descriptor 8, Word 0 #define MPU_RGD8_WORD1 (*(volatile uint32_t *)0x4000D484) // Region Descriptor 8, Word 1 #define MPU_RGD8_WORD2 (*(volatile uint32_t *)0x4000D488) // Region Descriptor 8, Word 2 #define MPU_RGD8_WORD3 (*(volatile uint32_t *)0x4000D48C) // Region Descriptor 8, Word 3 #define MPU_RGD9_WORD0 (*(volatile uint32_t *)0x4000D490) // Region Descriptor 9, Word 0 #define MPU_RGD9_WORD1 (*(volatile uint32_t *)0x4000D494) // Region Descriptor 9, Word 1 #define MPU_RGD9_WORD2 (*(volatile uint32_t *)0x4000D498) // Region Descriptor 9, Word 2 #define MPU_RGD9_WORD3 (*(volatile uint32_t *)0x4000D49C) // Region Descriptor 9, Word 3 #define MPU_RGD10_WORD0 (*(volatile uint32_t *)0x4000D4A0) // Region Descriptor 10, Word 0 #define MPU_RGD10_WORD1 (*(volatile uint32_t *)0x4000D4A4) // Region Descriptor 10, Word 1 #define MPU_RGD10_WORD2 (*(volatile uint32_t *)0x4000D4A8) // Region Descriptor 10, Word 2 #define MPU_RGD10_WORD3 (*(volatile uint32_t *)0x4000D4AC) // Region Descriptor 10, Word 3 #define MPU_RGD11_WORD0 (*(volatile uint32_t *)0x4000D4B0) // Region Descriptor 11, Word 0 #define MPU_RGD11_WORD1 (*(volatile uint32_t *)0x4000D4B4) // Region Descriptor 11, Word 1 #define MPU_RGD11_WORD2 (*(volatile uint32_t *)0x4000D4B8) // Region Descriptor 11, Word 2 #define MPU_RGD11_WORD3 (*(volatile uint32_t *)0x4000D4BC) // Region Descriptor 11, Word 3 #define MPU_RGDAAC0 (*(volatile uint32_t *)0x4000D800) // Region Descriptor Alternate Access Control 0 #define MPU_RGDAAC1 (*(volatile uint32_t *)0x4000D804) // Region Descriptor Alternate Access Control 1 #define MPU_RGDAAC2 (*(volatile uint32_t *)0x4000D808) // Region Descriptor Alternate Access Control 2 #define MPU_RGDAAC3 (*(volatile uint32_t *)0x4000D80C) // Region Descriptor Alternate Access Control 3 #define MPU_RGDAAC4 (*(volatile uint32_t *)0x4000D810) // Region Descriptor Alternate Access Control 4 #define MPU_RGDAAC5 (*(volatile uint32_t *)0x4000D814) // Region Descriptor Alternate Access Control 5 #define MPU_RGDAAC6 (*(volatile uint32_t *)0x4000D818) // Region Descriptor Alternate Access Control 6 #define MPU_RGDAAC7 (*(volatile uint32_t *)0x4000D81C) // Region Descriptor Alternate Access Control 7 #define MPU_RGDAAC8 (*(volatile uint32_t *)0x4000D820) // Region Descriptor Alternate Access Control 8 #define MPU_RGDAAC9 (*(volatile uint32_t *)0x4000D824) // Region Descriptor Alternate Access Control 9 #define MPU_RGDAAC10 (*(volatile uint32_t *)0x4000D828) // Region Descriptor Alternate Access Control 10 #define MPU_RGDAAC11 (*(volatile uint32_t *)0x4000D82C) // Region Descriptor Alternate Access Control 11 #endif // Direct Memory Access Multiplexer (DMAMUX) #if DMA_NUM_CHANNELS >= 4 #define DMAMUX0_CHCFG0 (*(volatile uint8_t *)0x40021000) // Channel Configuration register #define DMAMUX0_CHCFG1 (*(volatile uint8_t *)0x40021001) // Channel Configuration register #define DMAMUX0_CHCFG2 (*(volatile uint8_t *)0x40021002) // Channel Configuration register #define DMAMUX0_CHCFG3 (*(volatile uint8_t *)0x40021003) // Channel Configuration register #endif #if DMA_NUM_CHANNELS >= 16 #define DMAMUX0_CHCFG4 (*(volatile uint8_t *)0x40021004) // Channel Configuration register #define DMAMUX0_CHCFG5 (*(volatile uint8_t *)0x40021005) // Channel Configuration register #define DMAMUX0_CHCFG6 (*(volatile uint8_t *)0x40021006) // Channel Configuration register #define DMAMUX0_CHCFG7 (*(volatile uint8_t *)0x40021007) // Channel Configuration register #define DMAMUX0_CHCFG8 (*(volatile uint8_t *)0x40021008) // Channel Configuration register #define DMAMUX0_CHCFG9 (*(volatile uint8_t *)0x40021009) // Channel Configuration register #define DMAMUX0_CHCFG10 (*(volatile uint8_t *)0x4002100A) // Channel Configuration register #define DMAMUX0_CHCFG11 (*(volatile uint8_t *)0x4002100B) // Channel Configuration register #define DMAMUX0_CHCFG12 (*(volatile uint8_t *)0x4002100C) // Channel Configuration register #define DMAMUX0_CHCFG13 (*(volatile uint8_t *)0x4002100D) // Channel Configuration register #define DMAMUX0_CHCFG14 (*(volatile uint8_t *)0x4002100E) // Channel Configuration register #define DMAMUX0_CHCFG15 (*(volatile uint8_t *)0x4002100F) // Channel Configuration register #endif #if DMA_NUM_CHANNELS >= 32 #define DMAMUX0_CHCFG16 (*(volatile uint8_t *)0x40021010) // Channel Configuration register #define DMAMUX0_CHCFG17 (*(volatile uint8_t *)0x40021011) // Channel Configuration register #define DMAMUX0_CHCFG18 (*(volatile uint8_t *)0x40021012) // Channel Configuration register #define DMAMUX0_CHCFG19 (*(volatile uint8_t *)0x40021013) // Channel Configuration register #define DMAMUX0_CHCFG20 (*(volatile uint8_t *)0x40021014) // Channel Configuration register #define DMAMUX0_CHCFG21 (*(volatile uint8_t *)0x40021015) // Channel Configuration register #define DMAMUX0_CHCFG22 (*(volatile uint8_t *)0x40021016) // Channel Configuration register #define DMAMUX0_CHCFG23 (*(volatile uint8_t *)0x40021017) // Channel Configuration register #define DMAMUX0_CHCFG24 (*(volatile uint8_t *)0x40021018) // Channel Configuration register #define DMAMUX0_CHCFG25 (*(volatile uint8_t *)0x40021019) // Channel Configuration register #define DMAMUX0_CHCFG26 (*(volatile uint8_t *)0x4002101A) // Channel Configuration register #define DMAMUX0_CHCFG27 (*(volatile uint8_t *)0x4002101B) // Channel Configuration register #define DMAMUX0_CHCFG28 (*(volatile uint8_t *)0x4002101C) // Channel Configuration register #define DMAMUX0_CHCFG29 (*(volatile uint8_t *)0x4002101D) // Channel Configuration register #define DMAMUX0_CHCFG30 (*(volatile uint8_t *)0x4002101E) // Channel Configuration register #define DMAMUX0_CHCFG31 (*(volatile uint8_t *)0x4002101F) // Channel Configuration register #endif #define DMAMUX_DISABLE 0 #define DMAMUX_TRIG 64 #define DMAMUX_ENABLE 128 // Direct Memory Access Controller (eDMA) #if defined(KINETISK) #define DMA_CR (*(volatile uint32_t *)0x40008000) // Control Register #define DMA_CR_CX ((uint32_t)(1<<17)) // Cancel Transfer #define DMA_CR_ECX ((uint32_t)(1<<16)) // Error Cancel Transfer #define DMA_CR_EMLM ((uint32_t)0x80) // Enable Minor Loop Mapping #define DMA_CR_CLM ((uint32_t)0x40) // Continuous Link Mode #define DMA_CR_HALT ((uint32_t)0x20) // Halt DMA Operations #define DMA_CR_HOE ((uint32_t)0x10) // Halt On Error #define DMA_CR_ERCA ((uint32_t)0x04) // Enable Round Robin Channel Arbitration #define DMA_CR_EDBG ((uint32_t)0x02) // Enable Debug #define DMA_ES (*(volatile uint32_t *)0x40008004) // Error Status Register #define DMA_ERQ (*(volatile uint32_t *)0x4000800C) // Enable Request Register #define DMA_EEI (*(volatile uint32_t *)0x40008014) // Enable Error Interrupt Register #define DMA_CEEI (*(volatile uint8_t *)0x40008018) // Clear Enable Error Interrupt Register #define DMA_CEEI_CEEI(n) ((uint8_t)(n & 15)<<0) // Clear Enable Error Interrupt #define DMA_CEEI_CAEE ((uint8_t)1<<6) // Clear All Enable Error Interrupts #define DMA_CEEI_NOP ((uint8_t)1<<7) // NOP #define DMA_SEEI (*(volatile uint8_t *)0x40008019) // Set Enable Error Interrupt Register #define DMA_SEEI_SEEI(n) ((uint8_t)(n & 15)<<0) // Set Enable Error Interrupt #define DMA_SEEI_SAEE ((uint8_t)1<<6) // Set All Enable Error Interrupts #define DMA_SEEI_NOP ((uint8_t)1<<7) // NOP #define DMA_CERQ (*(volatile uint8_t *)0x4000801A) // Clear Enable Request Register #define DMA_CERQ_CERQ(n) ((uint8_t)(n & 15)<<0) // Clear Enable Request #define DMA_CERQ_CAER ((uint8_t)1<<6) // Clear All Enable Requests #define DMA_CERQ_NOP ((uint8_t)1<<7) // NOP #define DMA_SERQ (*(volatile uint8_t *)0x4000801B) // Set Enable Request Register #define DMA_SERQ_SERQ(n) ((uint8_t)(n & 15)<<0) // Set Enable Request #define DMA_SERQ_SAER ((uint8_t)1<<6) // Set All Enable Requests #define DMA_SERQ_NOP ((uint8_t)1<<7) // NOP #define DMA_CDNE (*(volatile uint8_t *)0x4000801C) // Clear DONE Status Bit Register #define DMA_CDNE_CDNE(n) ((uint8_t)(n & 15)<<0) // Clear Done Bit #define DMA_CDNE_CADN ((uint8_t)1<<6) // Clear All Done Bits #define DMA_CDNE_NOP ((uint8_t)1<<7) // NOP #define DMA_SSRT (*(volatile uint8_t *)0x4000801D) // Set START Bit Register #define DMA_SSRT_SSRT(n) ((uint8_t)(n & 15)<<0) // Set Start Bit #define DMA_SSRT_SAST ((uint8_t)1<<6) // Set All Start Bits #define DMA_SSRT_NOP ((uint8_t)1<<7) // NOP #define DMA_CERR (*(volatile uint8_t *)0x4000801E) // Clear Error Register #define DMA_CERR_CERR(n) ((uint8_t)(n & 15)<<0) // Clear Error Indicator #define DMA_CERR_CAEI ((uint8_t)1<<6) // Clear All Error Indicators #define DMA_CERR_NOP ((uint8_t)1<<7) // NOP #define DMA_CINT (*(volatile uint8_t *)0x4000801F) // Clear Interrupt Request Register #define DMA_CINT_CINT(n) ((uint8_t)(n & 15)<<0) // Clear Interrupt Request #define DMA_CINT_CAIR ((uint8_t)1<<6) // Clear All Interrupt Requests #define DMA_CINT_NOP ((uint8_t)1<<7) // NOP #define DMA_INT (*(volatile uint32_t *)0x40008024) // Interrupt Request Register #define DMA_ERR (*(volatile uint32_t *)0x4000802C) // Error Register #define DMA_HRS (*(volatile uint32_t *)0x40008034) // Hardware Request Status Register #if DMA_NUM_CHANNELS >= 4 #define DMA_ERQ_ERQ0 ((uint32_t)1<<0) // Enable DMA Request 0 #define DMA_ERQ_ERQ1 ((uint32_t)1<<1) // Enable DMA Request 1 #define DMA_ERQ_ERQ2 ((uint32_t)1<<2) // Enable DMA Request 2 #define DMA_ERQ_ERQ3 ((uint32_t)1<<3) // Enable DMA Request 3 #define DMA_INT_INT0 ((uint32_t)1<<0) // Interrupt Request 0 #define DMA_INT_INT1 ((uint32_t)1<<1) // Interrupt Request 1 #define DMA_INT_INT2 ((uint32_t)1<<2) // Interrupt Request 2 #define DMA_INT_INT3 ((uint32_t)1<<3) // Interrupt Request 3 #define DMA_ERR_ERR0 ((uint32_t)1<<0) // Error in Channel 0 #define DMA_ERR_ERR1 ((uint32_t)1<<1) // Error in Channel 1 #define DMA_ERR_ERR2 ((uint32_t)1<<2) // Error in Channel 2 #define DMA_ERR_ERR3 ((uint32_t)1<<3) // Error in Channel 3 #define DMA_HRS_HRS0 ((uint32_t)1<<0) // Hardware Request Status Channel 0 #define DMA_HRS_HRS1 ((uint32_t)1<<1) // Hardware Request Status Channel 1 #define DMA_HRS_HRS2 ((uint32_t)1<<2) // Hardware Request Status Channel 2 #define DMA_HRS_HRS3 ((uint32_t)1<<3) // Hardware Request Status Channel 3 #endif #if DMA_NUM_CHANNELS >= 16 #define DMA_ERQ_ERQ4 ((uint32_t)1<<4) // Enable DMA Request 4 #define DMA_ERQ_ERQ5 ((uint32_t)1<<5) // Enable DMA Request 5 #define DMA_ERQ_ERQ6 ((uint32_t)1<<6) // Enable DMA Request 6 #define DMA_ERQ_ERQ7 ((uint32_t)1<<7) // Enable DMA Request 7 #define DMA_ERQ_ERQ8 ((uint32_t)1<<8) // Enable DMA Request 8 #define DMA_ERQ_ERQ9 ((uint32_t)1<<9) // Enable DMA Request 9 #define DMA_ERQ_ERQ10 ((uint32_t)1<<10) // Enable DMA Request 10 #define DMA_ERQ_ERQ11 ((uint32_t)1<<11) // Enable DMA Request 11 #define DMA_ERQ_ERQ12 ((uint32_t)1<<12) // Enable DMA Request 12 #define DMA_ERQ_ERQ13 ((uint32_t)1<<13) // Enable DMA Request 13 #define DMA_ERQ_ERQ14 ((uint32_t)1<<14) // Enable DMA Request 14 #define DMA_ERQ_ERQ15 ((uint32_t)1<<15) // Enable DMA Request 15 #define DMA_INT_INT4 ((uint32_t)1<<4) // Interrupt Request 4 #define DMA_INT_INT5 ((uint32_t)1<<5) // Interrupt Request 5 #define DMA_INT_INT6 ((uint32_t)1<<6) // Interrupt Request 6 #define DMA_INT_INT7 ((uint32_t)1<<7) // Interrupt Request 7 #define DMA_INT_INT8 ((uint32_t)1<<8) // Interrupt Request 8 #define DMA_INT_INT9 ((uint32_t)1<<9) // Interrupt Request 9 #define DMA_INT_INT10 ((uint32_t)1<<10) // Interrupt Request 10 #define DMA_INT_INT11 ((uint32_t)1<<11) // Interrupt Request 11 #define DMA_INT_INT12 ((uint32_t)1<<12) // Interrupt Request 12 #define DMA_INT_INT13 ((uint32_t)1<<13) // Interrupt Request 13 #define DMA_INT_INT14 ((uint32_t)1<<14) // Interrupt Request 14 #define DMA_INT_INT15 ((uint32_t)1<<15) // Interrupt Request 15 #define DMA_ERR_ERR4 ((uint32_t)1<<4) // Error in Channel 4 #define DMA_ERR_ERR5 ((uint32_t)1<<5) // Error in Channel 5 #define DMA_ERR_ERR6 ((uint32_t)1<<6) // Error in Channel 6 #define DMA_ERR_ERR7 ((uint32_t)1<<7) // Error in Channel 7 #define DMA_ERR_ERR8 ((uint32_t)1<<8) // Error in Channel 8 #define DMA_ERR_ERR9 ((uint32_t)1<<9) // Error in Channel 9 #define DMA_ERR_ERR10 ((uint32_t)1<<10) // Error in Channel 10 #define DMA_ERR_ERR11 ((uint32_t)1<<11) // Error in Channel 11 #define DMA_ERR_ERR12 ((uint32_t)1<<12) // Error in Channel 12 #define DMA_ERR_ERR13 ((uint32_t)1<<13) // Error in Channel 13 #define DMA_ERR_ERR14 ((uint32_t)1<<14) // Error in Channel 14 #define DMA_ERR_ERR15 ((uint32_t)1<<15) // Error in Channel 15 #define DMA_HRS_HRS4 ((uint32_t)1<<4) // Hardware Request Status Channel 4 #define DMA_HRS_HRS5 ((uint32_t)1<<5) // Hardware Request Status Channel 5 #define DMA_HRS_HRS6 ((uint32_t)1<<6) // Hardware Request Status Channel 6 #define DMA_HRS_HRS7 ((uint32_t)1<<7) // Hardware Request Status Channel 7 #define DMA_HRS_HRS8 ((uint32_t)1<<8) // Hardware Request Status Channel 8 #define DMA_HRS_HRS9 ((uint32_t)1<<9) // Hardware Request Status Channel 9 #define DMA_HRS_HRS10 ((uint32_t)1<<10) // Hardware Request Status Channel 10 #define DMA_HRS_HRS11 ((uint32_t)1<<11) // Hardware Request Status Channel 11 #define DMA_HRS_HRS12 ((uint32_t)1<<12) // Hardware Request Status Channel 12 #define DMA_HRS_HRS13 ((uint32_t)1<<13) // Hardware Request Status Channel 13 #define DMA_HRS_HRS14 ((uint32_t)1<<14) // Hardware Request Status Channel 14 #define DMA_HRS_HRS15 ((uint32_t)1<<15) // Hardware Request Status Channel 15 #endif #if DMA_NUM_CHANNELS >= 32 #define DMA_ERQ_ERQ16 ((uint32_t)1<<16) // Enable DMA Request 16 #define DMA_ERQ_ERQ17 ((uint32_t)1<<17) // Enable DMA Request 17 #define DMA_ERQ_ERQ18 ((uint32_t)1<<18) // Enable DMA Request 18 #define DMA_ERQ_ERQ19 ((uint32_t)1<<19) // Enable DMA Request 19 #define DMA_ERQ_ERQ20 ((uint32_t)1<<20) // Enable DMA Request 20 #define DMA_ERQ_ERQ21 ((uint32_t)1<<21) // Enable DMA Request 21 #define DMA_ERQ_ERQ22 ((uint32_t)1<<22) // Enable DMA Request 22 #define DMA_ERQ_ERQ23 ((uint32_t)1<<23) // Enable DMA Request 23 #define DMA_ERQ_ERQ24 ((uint32_t)1<<24) // Enable DMA Request 24 #define DMA_ERQ_ERQ25 ((uint32_t)1<<25) // Enable DMA Request 25 #define DMA_ERQ_ERQ26 ((uint32_t)1<<26) // Enable DMA Request 26 #define DMA_ERQ_ERQ27 ((uint32_t)1<<27) // Enable DMA Request 27 #define DMA_ERQ_ERQ28 ((uint32_t)1<<28) // Enable DMA Request 28 #define DMA_ERQ_ERQ29 ((uint32_t)1<<29) // Enable DMA Request 29 #define DMA_ERQ_ERQ30 ((uint32_t)1<<30) // Enable DMA Request 30 #define DMA_ERQ_ERQ31 ((uint32_t)1<<31) // Enable DMA Request 31 #define DMA_INT_INT16 ((uint32_t)1<<16) // Interrupt Request 16 #define DMA_INT_INT17 ((uint32_t)1<<17) // Interrupt Request 17 #define DMA_INT_INT18 ((uint32_t)1<<18) // Interrupt Request 18 #define DMA_INT_INT19 ((uint32_t)1<<19) // Interrupt Request 19 #define DMA_INT_INT20 ((uint32_t)1<<20) // Interrupt Request 20 #define DMA_INT_INT21 ((uint32_t)1<<21) // Interrupt Request 21 #define DMA_INT_INT22 ((uint32_t)1<<22) // Interrupt Request 22 #define DMA_INT_INT23 ((uint32_t)1<<23) // Interrupt Request 23 #define DMA_INT_INT24 ((uint32_t)1<<24) // Interrupt Request 24 #define DMA_INT_INT25 ((uint32_t)1<<25) // Interrupt Request 25 #define DMA_INT_INT26 ((uint32_t)1<<26) // Interrupt Request 26 #define DMA_INT_INT27 ((uint32_t)1<<27) // Interrupt Request 27 #define DMA_INT_INT28 ((uint32_t)1<<28) // Interrupt Request 28 #define DMA_INT_INT29 ((uint32_t)1<<29) // Interrupt Request 29 #define DMA_INT_INT30 ((uint32_t)1<<30) // Interrupt Request 30 #define DMA_INT_INT31 ((uint32_t)1<<31) // Interrupt Request 31 #define DMA_ERR_ERR16 ((uint32_t)1<<16) // Error in Channel 16 #define DMA_ERR_ERR17 ((uint32_t)1<<17) // Error in Channel 17 #define DMA_ERR_ERR18 ((uint32_t)1<<18) // Error in Channel 18 #define DMA_ERR_ERR19 ((uint32_t)1<<19) // Error in Channel 19 #define DMA_ERR_ERR20 ((uint32_t)1<<20) // Error in Channel 20 #define DMA_ERR_ERR21 ((uint32_t)1<<21) // Error in Channel 21 #define DMA_ERR_ERR22 ((uint32_t)1<<22) // Error in Channel 22 #define DMA_ERR_ERR23 ((uint32_t)1<<23) // Error in Channel 23 #define DMA_ERR_ERR24 ((uint32_t)1<<24) // Error in Channel 24 #define DMA_ERR_ERR25 ((uint32_t)1<<25) // Error in Channel 25 #define DMA_ERR_ERR26 ((uint32_t)1<<26) // Error in Channel 26 #define DMA_ERR_ERR27 ((uint32_t)1<<27) // Error in Channel 27 #define DMA_ERR_ERR28 ((uint32_t)1<<28) // Error in Channel 28 #define DMA_ERR_ERR29 ((uint32_t)1<<29) // Error in Channel 29 #define DMA_ERR_ERR30 ((uint32_t)1<<30) // Error in Channel 30 #define DMA_ERR_ERR31 ((uint32_t)1<<31) // Error in Channel 31 #define DMA_HRS_HRS16 ((uint32_t)1<<16) // Hardware Request Status Channel 16 #define DMA_HRS_HRS17 ((uint32_t)1<<17) // Hardware Request Status Channel 17 #define DMA_HRS_HRS18 ((uint32_t)1<<18) // Hardware Request Status Channel 18 #define DMA_HRS_HRS19 ((uint32_t)1<<19) // Hardware Request Status Channel 19 #define DMA_HRS_HRS20 ((uint32_t)1<<20) // Hardware Request Status Channel 20 #define DMA_HRS_HRS21 ((uint32_t)1<<21) // Hardware Request Status Channel 21 #define DMA_HRS_HRS22 ((uint32_t)1<<22) // Hardware Request Status Channel 22 #define DMA_HRS_HRS23 ((uint32_t)1<<23) // Hardware Request Status Channel 23 #define DMA_HRS_HRS24 ((uint32_t)1<<24) // Hardware Request Status Channel 24 #define DMA_HRS_HRS25 ((uint32_t)1<<25) // Hardware Request Status Channel 25 #define DMA_HRS_HRS26 ((uint32_t)1<<26) // Hardware Request Status Channel 26 #define DMA_HRS_HRS27 ((uint32_t)1<<27) // Hardware Request Status Channel 27 #define DMA_HRS_HRS28 ((uint32_t)1<<28) // Hardware Request Status Channel 28 #define DMA_HRS_HRS29 ((uint32_t)1<<29) // Hardware Request Status Channel 29 #define DMA_HRS_HRS30 ((uint32_t)1<<30) // Hardware Request Status Channel 30 #define DMA_HRS_HRS31 ((uint32_t)1<<31) // Hardware Request Status Channel 31 #endif #if DMA_NUM_CHANNELS >= 4 #define DMA_DCHPRI3 (*(volatile uint8_t *)0x40008100) // Channel n Priority Register #define DMA_DCHPRI2 (*(volatile uint8_t *)0x40008101) // Channel n Priority Register #define DMA_DCHPRI1 (*(volatile uint8_t *)0x40008102) // Channel n Priority Register #define DMA_DCHPRI0 (*(volatile uint8_t *)0x40008103) // Channel n Priority Register #endif #define DMA_DCHPRI_CHPRI(n) ((uint8_t)(n & 15)<<0) // Channel Arbitration Priority #define DMA_DCHPRI_DPA ((uint8_t)1<<6) // Disable PreEmpt Ability #define DMA_DCHPRI_ECP ((uint8_t)1<<7) // Enable PreEmption #if DMA_NUM_CHANNELS >= 16 #define DMA_DCHPRI7 (*(volatile uint8_t *)0x40008104) // Channel n Priority Register #define DMA_DCHPRI6 (*(volatile uint8_t *)0x40008105) // Channel n Priority Register #define DMA_DCHPRI5 (*(volatile uint8_t *)0x40008106) // Channel n Priority Register #define DMA_DCHPRI4 (*(volatile uint8_t *)0x40008107) // Channel n Priority Register #define DMA_DCHPRI11 (*(volatile uint8_t *)0x40008108) // Channel n Priority Register #define DMA_DCHPRI10 (*(volatile uint8_t *)0x40008109) // Channel n Priority Register #define DMA_DCHPRI9 (*(volatile uint8_t *)0x4000810A) // Channel n Priority Register #define DMA_DCHPRI8 (*(volatile uint8_t *)0x4000810B) // Channel n Priority Register #define DMA_DCHPRI15 (*(volatile uint8_t *)0x4000810C) // Channel n Priority Register #define DMA_DCHPRI14 (*(volatile uint8_t *)0x4000810D) // Channel n Priority Register #define DMA_DCHPRI13 (*(volatile uint8_t *)0x4000810E) // Channel n Priority Register #define DMA_DCHPRI12 (*(volatile uint8_t *)0x4000810F) // Channel n Priority Register #endif #if DMA_NUM_CHANNELS >= 32 #define DMA_DCHPRI19 (*(volatile uint8_t *)0x40008110) // Channel n Priority Register #define DMA_DCHPRI18 (*(volatile uint8_t *)0x40008111) // Channel n Priority Register #define DMA_DCHPRI17 (*(volatile uint8_t *)0x40008112) // Channel n Priority Register #define DMA_DCHPRI16 (*(volatile uint8_t *)0x40008113) // Channel n Priority Register #define DMA_DCHPRI23 (*(volatile uint8_t *)0x40008114) // Channel n Priority Register #define DMA_DCHPRI22 (*(volatile uint8_t *)0x40008115) // Channel n Priority Register #define DMA_DCHPRI21 (*(volatile uint8_t *)0x40008116) // Channel n Priority Register #define DMA_DCHPRI20 (*(volatile uint8_t *)0x40008117) // Channel n Priority Register #define DMA_DCHPRI27 (*(volatile uint8_t *)0x40008118) // Channel n Priority Register #define DMA_DCHPRI26 (*(volatile uint8_t *)0x40008119) // Channel n Priority Register #define DMA_DCHPRI25 (*(volatile uint8_t *)0x4000811A) // Channel n Priority Register #define DMA_DCHPRI24 (*(volatile uint8_t *)0x4000811B) // Channel n Priority Register #define DMA_DCHPRI31 (*(volatile uint8_t *)0x4000811C) // Channel n Priority Register #define DMA_DCHPRI30 (*(volatile uint8_t *)0x4000811D) // Channel n Priority Register #define DMA_DCHPRI29 (*(volatile uint8_t *)0x4000811E) // Channel n Priority Register #define DMA_DCHPRI28 (*(volatile uint8_t *)0x4000811F) // Channel n Priority Register #define DMA_CR_GRP0PRI ((uint32_t)0x100) #define DMA_CR_GRP1PRI ((uint32_t)0x400) #endif #define DMA_TCD_ATTR_SMOD(n) (((n) & 0x1F) << 11) #define DMA_TCD_ATTR_SSIZE(n) (((n) & 0x7) << 8) #define DMA_TCD_ATTR_DMOD(n) (((n) & 0x1F) << 3) #define DMA_TCD_ATTR_DSIZE(n) (((n) & 0x7) << 0) #define DMA_TCD_ATTR_SIZE_8BIT 0 #define DMA_TCD_ATTR_SIZE_16BIT 1 #define DMA_TCD_ATTR_SIZE_32BIT 2 #define DMA_TCD_ATTR_SIZE_16BYTE 4 #define DMA_TCD_ATTR_SIZE_32BYTE 5 // caution: this might not be supported in newer chips? #define DMA_TCD_CSR_BWC(n) (((n) & 0x3) << 14) #define DMA_TCD_CSR_BWC_MASK 0xC000 #define DMA_TCD_CSR_MAJORLINKCH(n) (((n) & 0xF) << 8) #define DMA_TCD_CSR_MAJORLINKCH_MASK 0x0F00 #define DMA_TCD_CSR_DONE 0x0080 #define DMA_TCD_CSR_ACTIVE 0x0040 #define DMA_TCD_CSR_MAJORELINK 0x0020 #define DMA_TCD_CSR_ESG 0x0010 #define DMA_TCD_CSR_DREQ 0x0008 #define DMA_TCD_CSR_INTHALF 0x0004 #define DMA_TCD_CSR_INTMAJOR 0x0002 #define DMA_TCD_CSR_START 0x0001 #define DMA_TCD_CITER_MASK ((uint16_t)0x7FFF) // Loop count mask #define DMA_TCD_CITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete #define DMA_TCD_BITER_MASK ((uint16_t)0x7FFF) // Loop count mask #define DMA_TCD_BITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete #define DMA_TCD_BITER_ELINKYES_ELINK 0x8000 #define DMA_TCD_BITER_ELINKYES_LINKCH(n) (((n) & 0xF) << 9) #define DMA_TCD_BITER_ELINKYES_LINKCH_MASK 0x1E00 #define DMA_TCD_BITER_ELINKYES_BITER(n) (((n) & 0x1FF) << 0) #define DMA_TCD_BITER_ELINKYES_BITER_MASK 0x01FF #define DMA_TCD_CITER_ELINKYES_ELINK 0x8000 #define DMA_TCD_CITER_ELINKYES_LINKCH(n) (((n) & 0xF) << 9) #define DMA_TCD_CITER_ELINKYES_LINKCH_MASK 0x1E00 #define DMA_TCD_CITER_ELINKYES_CITER(n) (((n) & 0x1FF) << 0) #define DMA_TCD_CITER_ELINKYES_CITER_MASK 0x01FF #define DMA_TCD_NBYTES_SMLOE ((uint32_t)1<<31) // Source Minor Loop Offset Enable #define DMA_TCD_NBYTES_DMLOE ((uint32_t)1<<30) // Destination Minor Loop Offset Enable #define DMA_TCD_NBYTES_MLOFFNO_NBYTES(n) ((uint32_t)((n) & 0x3FFFFFFF)) // NBytes transfer count when minor loop disabled #define DMA_TCD_NBYTES_MLOFFYES_NBYTES(n) ((uint32_t)((n) & 0x3FF)) // NBytes transfer count when minor loop enabled #define DMA_TCD_NBYTES_MLOFFYES_MLOFF(n) ((uint32_t)((n) & 0xFFFFF)<<10) // Minor loop offset #if DMA_NUM_CHANNELS >= 4 #define DMA_TCD0_SADDR (*(volatile const void * volatile *)0x40009000) // TCD Source Address #define DMA_TCD0_SOFF (*(volatile int16_t *)0x40009004) // TCD Signed Source Address Offset #define DMA_TCD0_ATTR (*(volatile uint16_t *)0x40009006) // TCD Transfer Attributes #define DMA_TCD0_NBYTES_MLNO (*(volatile uint32_t *)0x40009008) // TCD Minor Byte Count (Minor Loop Disabled) #define DMA_TCD0_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009008) // TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) #define DMA_TCD0_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009008) // TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) #define DMA_TCD0_SLAST (*(volatile int32_t *)0x4000900C) // TCD Last Source Address Adjustment #define DMA_TCD0_DADDR (*(volatile void * volatile *)0x40009010) // TCD Destination Address #define DMA_TCD0_DOFF (*(volatile int16_t *)0x40009014) // TCD Signed Destination Address Offset #define DMA_TCD0_CITER_ELINKYES (*(volatile uint16_t *)0x40009016) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD0_CITER_ELINKNO (*(volatile uint16_t *)0x40009016) // ?? #define DMA_TCD0_DLASTSGA (*(volatile int32_t *)0x40009018) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD0_CSR (*(volatile uint16_t *)0x4000901C) // TCD Control and Status #define DMA_TCD0_BITER_ELINKYES (*(volatile uint16_t *)0x4000901E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD0_BITER_ELINKNO (*(volatile uint16_t *)0x4000901E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled #define DMA_TCD1_SADDR (*(volatile const void * volatile *)0x40009020) // TCD Source Address #define DMA_TCD1_SOFF (*(volatile int16_t *)0x40009024) // TCD Signed Source Address Offset #define DMA_TCD1_ATTR (*(volatile uint16_t *)0x40009026) // TCD Transfer Attributes #define DMA_TCD1_NBYTES_MLNO (*(volatile uint32_t *)0x40009028) // TCD Minor Byte Count, Minor Loop Disabled #define DMA_TCD1_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009028) // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled #define DMA_TCD1_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009028) // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled #define DMA_TCD1_SLAST (*(volatile int32_t *)0x4000902C) // TCD Last Source Address Adjustment #define DMA_TCD1_DADDR (*(volatile void * volatile *)0x40009030) // TCD Destination Address #define DMA_TCD1_DOFF (*(volatile int16_t *)0x40009034) // TCD Signed Destination Address Offset #define DMA_TCD1_CITER_ELINKYES (*(volatile uint16_t *)0x40009036) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD1_CITER_ELINKNO (*(volatile uint16_t *)0x40009036) // ?? #define DMA_TCD1_DLASTSGA (*(volatile int32_t *)0x40009038) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD1_CSR (*(volatile uint16_t *)0x4000903C) // TCD Control and Status #define DMA_TCD1_BITER_ELINKYES (*(volatile uint16_t *)0x4000903E) // TCD Beginning Minor Loop Link, Major Loop Count Channel Linking Enabled #define DMA_TCD1_BITER_ELINKNO (*(volatile uint16_t *)0x4000903E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled #define DMA_TCD2_SADDR (*(volatile const void * volatile *)0x40009040) // TCD Source Address #define DMA_TCD2_SOFF (*(volatile int16_t *)0x40009044) // TCD Signed Source Address Offset #define DMA_TCD2_ATTR (*(volatile uint16_t *)0x40009046) // TCD Transfer Attributes #define DMA_TCD2_NBYTES_MLNO (*(volatile uint32_t *)0x40009048) // TCD Minor Byte Count, Minor Loop Disabled #define DMA_TCD2_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009048) // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled #define DMA_TCD2_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009048) // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled #define DMA_TCD2_SLAST (*(volatile int32_t *)0x4000904C) // TCD Last Source Address Adjustment #define DMA_TCD2_DADDR (*(volatile void * volatile *)0x40009050) // TCD Destination Address #define DMA_TCD2_DOFF (*(volatile int16_t *)0x40009054) // TCD Signed Destination Address Offset #define DMA_TCD2_CITER_ELINKYES (*(volatile uint16_t *)0x40009056) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD2_CITER_ELINKNO (*(volatile uint16_t *)0x40009056) // ?? #define DMA_TCD2_DLASTSGA (*(volatile int32_t *)0x40009058) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD2_CSR (*(volatile uint16_t *)0x4000905C) // TCD Control and Status #define DMA_TCD2_BITER_ELINKYES (*(volatile uint16_t *)0x4000905E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD2_BITER_ELINKNO (*(volatile uint16_t *)0x4000905E) // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled #define DMA_TCD3_SADDR (*(volatile const void * volatile *)0x40009060) // TCD Source Address #define DMA_TCD3_SOFF (*(volatile int16_t *)0x40009064) // TCD Signed Source Address Offset #define DMA_TCD3_ATTR (*(volatile uint16_t *)0x40009066) // TCD Transfer Attributes #define DMA_TCD3_NBYTES_MLNO (*(volatile uint32_t *)0x40009068) // TCD Minor Byte Count, Minor Loop Disabled #define DMA_TCD3_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009068) // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled #define DMA_TCD3_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009068) // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled #define DMA_TCD3_SLAST (*(volatile int32_t *)0x4000906C) // TCD Last Source Address Adjustment #define DMA_TCD3_DADDR (*(volatile void * volatile *)0x40009070) // TCD Destination Address #define DMA_TCD3_DOFF (*(volatile int16_t *)0x40009074) // TCD Signed Destination Address Offset #define DMA_TCD3_CITER_ELINKYES (*(volatile uint16_t *)0x40009076) // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled #define DMA_TCD3_CITER_ELINKNO (*(volatile uint16_t *)0x40009076) // ?? #define DMA_TCD3_DLASTSGA (*(volatile int32_t *)0x40009078) // TCD Last Destination Address Adjustment/Scatter Gather Address #define DMA_TCD3_CSR (*(volatile uint16_t *)0x4000907C) // TCD Control and Status #define DMA_TCD3_BITER_ELINKYES (*(volatile uint16_t *)0x4000907E) // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Enabled #define DMA_TCD3_BITER_ELINKNO (*(volatile uint16_t *)0x4000907E) // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Disabled #define DMA_TCD4_SADDR (*(volatile const void * volatile *)0x40009080) // TCD Source Addr #define DMA_TCD4_SOFF (*(volatile int16_t *)0x40009084) // TCD Signed Source Address Offset #define DMA_TCD4_ATTR (*(volatile uint16_t *)0x40009086) // TCD Transfer Attributes #define DMA_TCD4_NBYTES_MLNO (*(volatile uint32_t *)0x40009088) // TCD Minor Byte Count #define DMA_TCD4_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009088) // TCD Signed Minor Loop Offset #define DMA_TCD4_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009088) // TCD Signed Minor Loop Offset #define DMA_TCD4_SLAST (*(volatile int32_t *)0x4000908C) // TCD Last Source Addr Adj. #define DMA_TCD4_DADDR (*(volatile void * volatile *)0x40009090) // TCD Destination Address #define DMA_TCD4_DOFF (*(volatile int16_t *)0x40009094) // TCD Signed Dest Address Offset #define DMA_TCD4_CITER_ELINKYES (*(volatile uint16_t *)0x40009096) // TCD Current Minor Loop Link #define DMA_TCD4_CITER_ELINKNO (*(volatile uint16_t *)0x40009096) // ?? #define DMA_TCD4_DLASTSGA (*(volatile int32_t *)0x40009098) // TCD Last Destination Addr Adj #define DMA_TCD4_CSR (*(volatile uint16_t *)0x4000909C) // TCD Control and Status #define DMA_TCD4_BITER_ELINKYES (*(volatile uint16_t *)0x4000909E) // TCD Beginning Minor Loop Link #define DMA_TCD4_BITER_ELINKNO (*(volatile uint16_t *)0x4000909E) // TCD Beginning Minor Loop Link #endif #if DMA_NUM_CHANNELS >= 16 #define DMA_TCD5_SADDR (*(volatile const void * volatile *)0x400090A0) // TCD Source Addr #define DMA_TCD5_SOFF (*(volatile int16_t *)0x400090A4) // TCD Signed Source Address Offset #define DMA_TCD5_ATTR (*(volatile uint16_t *)0x400090A6) // TCD Transfer Attributes #define DMA_TCD5_NBYTES_MLNO (*(volatile uint32_t *)0x400090A8) // TCD Minor Byte Count #define DMA_TCD5_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400090A8) // TCD Signed Minor Loop Offset #define DMA_TCD5_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400090A8) // TCD Signed Minor Loop Offset #define DMA_TCD5_SLAST (*(volatile int32_t *)0x400090AC) // TCD Last Source Addr Adj. #define DMA_TCD5_DADDR (*(volatile void * volatile *)0x400090B0) // TCD Destination Address #define DMA_TCD5_DOFF (*(volatile int16_t *)0x400090B4) // TCD Signed Dest Address Offset #define DMA_TCD5_CITER_ELINKYES (*(volatile uint16_t *)0x400090B6) // TCD Current Minor Loop Link #define DMA_TCD5_CITER_ELINKNO (*(volatile uint16_t *)0x400090B6) // ?? #define DMA_TCD5_DLASTSGA (*(volatile int32_t *)0x400090B8) // TCD Last Destination Addr Adj #define DMA_TCD5_CSR (*(volatile uint16_t *)0x400090BC) // TCD Control and Status #define DMA_TCD5_BITER_ELINKYES (*(volatile uint16_t *)0x400090BE) // TCD Beginning Minor Loop Link #define DMA_TCD5_BITER_ELINKNO (*(volatile uint16_t *)0x400090BE) // TCD Beginning Minor Loop Link #define DMA_TCD6_SADDR (*(volatile const void * volatile *)0x400090C0) // TCD Source Addr #define DMA_TCD6_SOFF (*(volatile int16_t *)0x400090C4) // TCD Signed Source Address Offset #define DMA_TCD6_ATTR (*(volatile uint16_t *)0x400090C6) // TCD Transfer Attributes #define DMA_TCD6_NBYTES_MLNO (*(volatile uint32_t *)0x400090C8) // TCD Minor Byte Count #define DMA_TCD6_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400090C8) // TCD Signed Minor Loop Offset #define DMA_TCD6_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400090C8) // TCD Signed Minor Loop Offset #define DMA_TCD6_SLAST (*(volatile int32_t *)0x400090CC) // TCD Last Source Addr Adj. #define DMA_TCD6_DADDR (*(volatile void * volatile *)0x400090D0) // TCD Destination Address #define DMA_TCD6_DOFF (*(volatile int16_t *)0x400090D4) // TCD Signed Dest Address Offset #define DMA_TCD6_CITER_ELINKYES (*(volatile uint16_t *)0x400090D6) // TCD Current Minor Loop Link #define DMA_TCD6_CITER_ELINKNO (*(volatile uint16_t *)0x400090D6) // ?? #define DMA_TCD6_DLASTSGA (*(volatile int32_t *)0x400090D8) // TCD Last Destination Addr Adj #define DMA_TCD6_CSR (*(volatile uint16_t *)0x400090DC) // TCD Control and Status #define DMA_TCD6_BITER_ELINKYES (*(volatile uint16_t *)0x400090DE) // TCD Beginning Minor Loop Link #define DMA_TCD6_BITER_ELINKNO (*(volatile uint16_t *)0x400090DE) // TCD Beginning Minor Loop Link #define DMA_TCD7_SADDR (*(volatile const void * volatile *)0x400090E0) // TCD Source Addr #define DMA_TCD7_SOFF (*(volatile int16_t *)0x400090E4) // TCD Signed Source Address Offset #define DMA_TCD7_ATTR (*(volatile uint16_t *)0x400090E6) // TCD Transfer Attributes #define DMA_TCD7_NBYTES_MLNO (*(volatile uint32_t *)0x400090E8) // TCD Minor Byte Count #define DMA_TCD7_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400090E8) // TCD Signed Minor Loop Offset #define DMA_TCD7_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400090E8) // TCD Signed Minor Loop Offset #define DMA_TCD7_SLAST (*(volatile int32_t *)0x400090EC) // TCD Last Source Addr Adj. #define DMA_TCD7_DADDR (*(volatile void * volatile *)0x400090F0) // TCD Destination Address #define DMA_TCD7_DOFF (*(volatile int16_t *)0x400090F4) // TCD Signed Dest Address Offset #define DMA_TCD7_CITER_ELINKYES (*(volatile uint16_t *)0x400090F6) // TCD Current Minor Loop Link #define DMA_TCD7_CITER_ELINKNO (*(volatile uint16_t *)0x400090F6) // ?? #define DMA_TCD7_DLASTSGA (*(volatile int32_t *)0x400090F8) // TCD Last Destination Addr Adj #define DMA_TCD7_CSR (*(volatile uint16_t *)0x400090FC) // TCD Control and Status #define DMA_TCD7_BITER_ELINKYES (*(volatile uint16_t *)0x400090FE) // TCD Beginning Minor Loop Link #define DMA_TCD7_BITER_ELINKNO (*(volatile uint16_t *)0x400090FE) // TCD Beginning Minor Loop Link #define DMA_TCD8_SADDR (*(volatile const void * volatile *)0x40009100) // TCD Source Addr #define DMA_TCD8_SOFF (*(volatile int16_t *)0x40009104) // TCD Signed Source Address Offset #define DMA_TCD8_ATTR (*(volatile uint16_t *)0x40009106) // TCD Transfer Attributes #define DMA_TCD8_NBYTES_MLNO (*(volatile uint32_t *)0x40009108) // TCD Minor Byte Count #define DMA_TCD8_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009108) // TCD Signed Minor Loop Offset #define DMA_TCD8_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009108) // TCD Signed Minor Loop Offset #define DMA_TCD8_SLAST (*(volatile int32_t *)0x4000910C) // TCD Last Source Addr Adj. #define DMA_TCD8_DADDR (*(volatile void * volatile *)0x40009110) // TCD Destination Address #define DMA_TCD8_DOFF (*(volatile int16_t *)0x40009114) // TCD Signed Dest Address Offset #define DMA_TCD8_CITER_ELINKYES (*(volatile uint16_t *)0x40009116) // TCD Current Minor Loop Link #define DMA_TCD8_CITER_ELINKNO (*(volatile uint16_t *)0x40009116) // ?? #define DMA_TCD8_DLASTSGA (*(volatile int32_t *)0x40009118) // TCD Last Destination Addr Adj #define DMA_TCD8_CSR (*(volatile uint16_t *)0x4000911C) // TCD Control and Status #define DMA_TCD8_BITER_ELINKYES (*(volatile uint16_t *)0x4000911E) // TCD Beginning Minor Loop Link #define DMA_TCD8_BITER_ELINKNO (*(volatile uint16_t *)0x4000911E) // TCD Beginning Minor Loop Link #define DMA_TCD9_SADDR (*(volatile const void * volatile *)0x40009120) // TCD Source Addr #define DMA_TCD9_SOFF (*(volatile int16_t *)0x40009124) // TCD Signed Source Address Offset #define DMA_TCD9_ATTR (*(volatile uint16_t *)0x40009126) // TCD Transfer Attributes #define DMA_TCD9_NBYTES_MLNO (*(volatile uint32_t *)0x40009128) // TCD Minor Byte Count #define DMA_TCD9_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009128) // TCD Signed Minor Loop Offset #define DMA_TCD9_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009128) // TCD Signed Minor Loop Offset #define DMA_TCD9_SLAST (*(volatile int32_t *)0x4000912C) // TCD Last Source Addr Adj. #define DMA_TCD9_DADDR (*(volatile void * volatile *)0x40009130) // TCD Destination Address #define DMA_TCD9_DOFF (*(volatile int16_t *)0x40009134) // TCD Signed Dest Address Offset #define DMA_TCD9_CITER_ELINKYES (*(volatile uint16_t *)0x40009136) // TCD Current Minor Loop Link #define DMA_TCD9_CITER_ELINKNO (*(volatile uint16_t *)0x40009136) // ?? #define DMA_TCD9_DLASTSGA (*(volatile int32_t *)0x40009138) // TCD Last Destination Addr Adj #define DMA_TCD9_CSR (*(volatile uint16_t *)0x4000913C) // TCD Control and Status #define DMA_TCD9_BITER_ELINKYES (*(volatile uint16_t *)0x4000913E) // TCD Beginning Minor Loop Link #define DMA_TCD9_BITER_ELINKNO (*(volatile uint16_t *)0x4000913E) // TCD Beginning Minor Loop Link #define DMA_TCD10_SADDR (*(volatile const void * volatile *)0x40009140) // TCD Source Addr #define DMA_TCD10_SOFF (*(volatile int16_t *)0x40009144) // TCD Signed Source Address Offset #define DMA_TCD10_ATTR (*(volatile uint16_t *)0x40009146) // TCD Transfer Attributes #define DMA_TCD10_NBYTES_MLNO (*(volatile uint32_t *)0x40009148) // TCD Minor Byte Count #define DMA_TCD10_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009148) // TCD Signed Minor Loop Offset #define DMA_TCD10_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009148) // TCD Signed Minor Loop Offset #define DMA_TCD10_SLAST (*(volatile int32_t *)0x4000914C) // TCD Last Source Addr Adj. #define DMA_TCD10_DADDR (*(volatile void * volatile *)0x40009150) // TCD Destination Address #define DMA_TCD10_DOFF (*(volatile int16_t *)0x40009154) // TCD Signed Dest Address Offset #define DMA_TCD10_CITER_ELINKYES (*(volatile uint16_t *)0x40009156) // TCD Current Minor Loop Link #define DMA_TCD10_CITER_ELINKNO (*(volatile uint16_t *)0x40009156) // ?? #define DMA_TCD10_DLASTSGA (*(volatile int32_t *)0x40009158) // TCD Last Destination Addr Adj #define DMA_TCD10_CSR (*(volatile uint16_t *)0x4000915C) // TCD Control and Status #define DMA_TCD10_BITER_ELINKYES (*(volatile uint16_t *)0x4000915E) // TCD Beginning Minor Loop Link #define DMA_TCD10_BITER_ELINKNO (*(volatile uint16_t *)0x4000915E) // TCD Beginning Minor Loop Link #define DMA_TCD11_SADDR (*(volatile const void * volatile *)0x40009160) // TCD Source Addr #define DMA_TCD11_SOFF (*(volatile int16_t *)0x40009164) // TCD Signed Source Address Offset #define DMA_TCD11_ATTR (*(volatile uint16_t *)0x40009166) // TCD Transfer Attributes #define DMA_TCD11_NBYTES_MLNO (*(volatile uint32_t *)0x40009168) // TCD Minor Byte Count #define DMA_TCD11_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009168) // TCD Signed Minor Loop Offset #define DMA_TCD11_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009168) // TCD Signed Minor Loop Offset #define DMA_TCD11_SLAST (*(volatile int32_t *)0x4000916C) // TCD Last Source Addr Adj. #define DMA_TCD11_DADDR (*(volatile void * volatile *)0x40009170) // TCD Destination Address #define DMA_TCD11_DOFF (*(volatile int16_t *)0x40009174) // TCD Signed Dest Address Offset #define DMA_TCD11_CITER_ELINKYES (*(volatile uint16_t *)0x40009176) // TCD Current Minor Loop Link #define DMA_TCD11_CITER_ELINKNO (*(volatile uint16_t *)0x40009176) // ?? #define DMA_TCD11_DLASTSGA (*(volatile int32_t *)0x40009178) // TCD Last Destination Addr Adj #define DMA_TCD11_CSR (*(volatile uint16_t *)0x4000917C) // TCD Control and Status #define DMA_TCD11_BITER_ELINKYES (*(volatile uint16_t *)0x4000917E) // TCD Beginning Minor Loop Link #define DMA_TCD11_BITER_ELINKNO (*(volatile uint16_t *)0x4000917E) // TCD Beginning Minor Loop Link #define DMA_TCD12_SADDR (*(volatile const void * volatile *)0x40009180) // TCD Source Addr #define DMA_TCD12_SOFF (*(volatile int16_t *)0x40009184) // TCD Signed Source Address Offset #define DMA_TCD12_ATTR (*(volatile uint16_t *)0x40009186) // TCD Transfer Attributes #define DMA_TCD12_NBYTES_MLNO (*(volatile uint32_t *)0x40009188) // TCD Minor Byte Count #define DMA_TCD12_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009188) // TCD Signed Minor Loop Offset #define DMA_TCD12_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009188) // TCD Signed Minor Loop Offset #define DMA_TCD12_SLAST (*(volatile int32_t *)0x4000918C) // TCD Last Source Addr Adj. #define DMA_TCD12_DADDR (*(volatile void * volatile *)0x40009190) // TCD Destination Address #define DMA_TCD12_DOFF (*(volatile int16_t *)0x40009194) // TCD Signed Dest Address Offset #define DMA_TCD12_CITER_ELINKYES (*(volatile uint16_t *)0x40009196) // TCD Current Minor Loop Link #define DMA_TCD12_CITER_ELINKNO (*(volatile uint16_t *)0x40009196) // ?? #define DMA_TCD12_DLASTSGA (*(volatile int32_t *)0x40009198) // TCD Last Destination Addr Adj #define DMA_TCD12_CSR (*(volatile uint16_t *)0x4000919C) // TCD Control and Status #define DMA_TCD12_BITER_ELINKYES (*(volatile uint16_t *)0x4000919E) // TCD Beginning Minor Loop Link #define DMA_TCD12_BITER_ELINKNO (*(volatile uint16_t *)0x4000919E) // TCD Beginning Minor Loop Link #define DMA_TCD13_SADDR (*(volatile const void * volatile *)0x400091A0) // TCD Source Addr #define DMA_TCD13_SOFF (*(volatile int16_t *)0x400091A4) // TCD Signed Source Address Offset #define DMA_TCD13_ATTR (*(volatile uint16_t *)0x400091A6) // TCD Transfer Attributes #define DMA_TCD13_NBYTES_MLNO (*(volatile uint32_t *)0x400091A8) // TCD Minor Byte Count #define DMA_TCD13_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400091A8) // TCD Signed Minor Loop Offset #define DMA_TCD13_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400091A8) // TCD Signed Minor Loop Offset #define DMA_TCD13_SLAST (*(volatile int32_t *)0x400091AC) // TCD Last Source Addr Adj. #define DMA_TCD13_DADDR (*(volatile void * volatile *)0x400091B0) // TCD Destination Address #define DMA_TCD13_DOFF (*(volatile int16_t *)0x400091B4) // TCD Signed Dest Address Offset #define DMA_TCD13_CITER_ELINKYES (*(volatile uint16_t *)0x400091B6) // TCD Current Minor Loop Link #define DMA_TCD13_CITER_ELINKNO (*(volatile uint16_t *)0x400091B6) // ?? #define DMA_TCD13_DLASTSGA (*(volatile int32_t *)0x400091B8) // TCD Last Destination Addr Adj #define DMA_TCD13_CSR (*(volatile uint16_t *)0x400091BC) // TCD Control and Status #define DMA_TCD13_BITER_ELINKYES (*(volatile uint16_t *)0x400091BE) // TCD Beginning Minor Loop Link #define DMA_TCD13_BITER_ELINKNO (*(volatile uint16_t *)0x400091BE) // TCD Beginning Minor Loop Link #define DMA_TCD14_SADDR (*(volatile const void * volatile *)0x400091C0) // TCD Source Addr #define DMA_TCD14_SOFF (*(volatile int16_t *)0x400091C4) // TCD Signed Source Address Offset #define DMA_TCD14_ATTR (*(volatile uint16_t *)0x400091C6) // TCD Transfer Attributes #define DMA_TCD14_NBYTES_MLNO (*(volatile uint32_t *)0x400091C8) // TCD Minor Byte Count #define DMA_TCD14_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400091C8) // TCD Signed Minor Loop Offset #define DMA_TCD14_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400091C8) // TCD Signed Minor Loop Offset #define DMA_TCD14_SLAST (*(volatile int32_t *)0x400091CC) // TCD Last Source Addr Adj. #define DMA_TCD14_DADDR (*(volatile void * volatile *)0x400091D0) // TCD Destination Address #define DMA_TCD14_DOFF (*(volatile int16_t *)0x400091D4) // TCD Signed Dest Address Offset #define DMA_TCD14_CITER_ELINKYES (*(volatile uint16_t *)0x400091D6) // TCD Current Minor Loop Link #define DMA_TCD14_CITER_ELINKNO (*(volatile uint16_t *)0x400091D6) // ?? #define DMA_TCD14_DLASTSGA (*(volatile int32_t *)0x400091D8) // TCD Last Destination Addr Adj #define DMA_TCD14_CSR (*(volatile uint16_t *)0x400091DC) // TCD Control and Status #define DMA_TCD14_BITER_ELINKYES (*(volatile uint16_t *)0x400091DE) // TCD Beginning Minor Loop Link #define DMA_TCD14_BITER_ELINKNO (*(volatile uint16_t *)0x400091DE) // TCD Beginning Minor Loop Link #define DMA_TCD15_SADDR (*(volatile const void * volatile *)0x400091E0) // TCD Source Addr #define DMA_TCD15_SOFF (*(volatile int16_t *)0x400091E4) // TCD Signed Source Address Offset #define DMA_TCD15_ATTR (*(volatile uint16_t *)0x400091E6) // TCD Transfer Attributes #define DMA_TCD15_NBYTES_MLNO (*(volatile uint32_t *)0x400091E8) // TCD Minor Byte Count #define DMA_TCD15_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400091E8) // TCD Signed Minor Loop Offset #define DMA_TCD15_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400091E8) // TCD Signed Minor Loop Offset #define DMA_TCD15_SLAST (*(volatile int32_t *)0x400091EC) // TCD Last Source Addr Adj. #define DMA_TCD15_DADDR (*(volatile void * volatile *)0x400091F0) // TCD Destination Address #define DMA_TCD15_DOFF (*(volatile int16_t *)0x400091F4) // TCD Signed Dest Address Offset #define DMA_TCD15_CITER_ELINKYES (*(volatile uint16_t *)0x400091F6) // TCD Current Minor Loop Link #define DMA_TCD15_CITER_ELINKNO (*(volatile uint16_t *)0x400091F6) // ?? #define DMA_TCD15_DLASTSGA (*(volatile int32_t *)0x400091F8) // TCD Last Destination Addr Adj #define DMA_TCD15_CSR (*(volatile uint16_t *)0x400091FC) // TCD Control and Status #define DMA_TCD15_BITER_ELINKYES (*(volatile uint16_t *)0x400091FE) // TCD Beginning Minor Loop Link #define DMA_TCD15_BITER_ELINKNO (*(volatile uint16_t *)0x400091FE) // TCD Beginning Minor Loop Link #endif #if DMA_NUM_CHANNELS >= 32 #define DMA_TCD16_SADDR (*(volatile const void * volatile *)0x40009200) // TCD Source Addr #define DMA_TCD16_SOFF (*(volatile int16_t *)0x40009204) // TCD Signed Source Address Offset #define DMA_TCD16_ATTR (*(volatile uint16_t *)0x40009206) // TCD Transfer Attributes #define DMA_TCD16_NBYTES_MLNO (*(volatile uint32_t *)0x40009208) // TCD Minor Byte Count #define DMA_TCD16_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009208) // TCD Signed Minor Loop Offset #define DMA_TCD16_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009208) // TCD Signed Minor Loop Offset #define DMA_TCD16_SLAST (*(volatile int32_t *)0x4000920C) // TCD Last Source Addr Adj. #define DMA_TCD16_DADDR (*(volatile void * volatile *)0x40009210) // TCD Destination Address #define DMA_TCD16_DOFF (*(volatile int16_t *)0x40009214) // TCD Signed Dest Address Offset #define DMA_TCD16_CITER_ELINKYES (*(volatile uint16_t *)0x40009216) // TCD Current Minor Loop Link #define DMA_TCD16_CITER_ELINKNO (*(volatile uint16_t *)0x40009216) // ?? #define DMA_TCD16_DLASTSGA (*(volatile int32_t *)0x40009218) // TCD Last Destination Addr Adj #define DMA_TCD16_CSR (*(volatile uint16_t *)0x4000921C) // TCD Control and Status #define DMA_TCD16_BITER_ELINKYES (*(volatile uint16_t *)0x4000921E) // TCD Beginning Minor Loop Link #define DMA_TCD16_BITER_ELINKNO (*(volatile uint16_t *)0x4000921E) // TCD Beginning Minor Loop Link #define DMA_TCD17_SADDR (*(volatile const void * volatile *)0x40009220) // TCD Source Addr #define DMA_TCD17_SOFF (*(volatile int16_t *)0x40009224) // TCD Signed Source Address Offset #define DMA_TCD17_ATTR (*(volatile uint16_t *)0x40009226) // TCD Transfer Attributes #define DMA_TCD17_NBYTES_MLNO (*(volatile uint32_t *)0x40009228) // TCD Minor Byte Count #define DMA_TCD17_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009228) // TCD Signed Minor Loop Offset #define DMA_TCD17_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009228) // TCD Signed Minor Loop Offset #define DMA_TCD17_SLAST (*(volatile int32_t *)0x4000922C) // TCD Last Source Addr Adj. #define DMA_TCD17_DADDR (*(volatile void * volatile *)0x40009230) // TCD Destination Address #define DMA_TCD17_DOFF (*(volatile int16_t *)0x40009234) // TCD Signed Dest Address Offset #define DMA_TCD17_CITER_ELINKYES (*(volatile uint16_t *)0x40009236) // TCD Current Minor Loop Link #define DMA_TCD17_CITER_ELINKNO (*(volatile uint16_t *)0x40009236) // ?? #define DMA_TCD17_DLASTSGA (*(volatile int32_t *)0x40009238) // TCD Last Destination Addr Adj #define DMA_TCD17_CSR (*(volatile uint16_t *)0x4000923C) // TCD Control and Status #define DMA_TCD17_BITER_ELINKYES (*(volatile uint16_t *)0x4000923E) // TCD Beginning Minor Loop Link #define DMA_TCD17_BITER_ELINKNO (*(volatile uint16_t *)0x4000923E) // TCD Beginning Minor Loop Link #define DMA_TCD18_SADDR (*(volatile const void * volatile *)0x40009240) // TCD Source Addr #define DMA_TCD18_SOFF (*(volatile int16_t *)0x40009244) // TCD Signed Source Address Offset #define DMA_TCD18_ATTR (*(volatile uint16_t *)0x40009246) // TCD Transfer Attributes #define DMA_TCD18_NBYTES_MLNO (*(volatile uint32_t *)0x40009248) // TCD Minor Byte Count #define DMA_TCD18_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009248) // TCD Signed Minor Loop Offset #define DMA_TCD18_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009248) // TCD Signed Minor Loop Offset #define DMA_TCD18_SLAST (*(volatile int32_t *)0x4000924C) // TCD Last Source Addr Adj. #define DMA_TCD18_DADDR (*(volatile void * volatile *)0x40009250) // TCD Destination Address #define DMA_TCD18_DOFF (*(volatile int16_t *)0x40009254) // TCD Signed Dest Address Offset #define DMA_TCD18_CITER_ELINKYES (*(volatile uint16_t *)0x40009256) // TCD Current Minor Loop Link #define DMA_TCD18_CITER_ELINKNO (*(volatile uint16_t *)0x40009256) // ?? #define DMA_TCD18_DLASTSGA (*(volatile int32_t *)0x40009258) // TCD Last Destination Addr Adj #define DMA_TCD18_CSR (*(volatile uint16_t *)0x4000925C) // TCD Control and Status #define DMA_TCD18_BITER_ELINKYES (*(volatile uint16_t *)0x4000925E) // TCD Beginning Minor Loop Link #define DMA_TCD18_BITER_ELINKNO (*(volatile uint16_t *)0x4000925E) // TCD Beginning Minor Loop Link #define DMA_TCD19_SADDR (*(volatile const void * volatile *)0x40009260) // TCD Source Addr #define DMA_TCD19_SOFF (*(volatile int16_t *)0x40009264) // TCD Signed Source Address Offset #define DMA_TCD19_ATTR (*(volatile uint16_t *)0x40009266) // TCD Transfer Attributes #define DMA_TCD19_NBYTES_MLNO (*(volatile uint32_t *)0x40009268) // TCD Minor Byte Count #define DMA_TCD19_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009268) // TCD Signed Minor Loop Offset #define DMA_TCD19_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009268) // TCD Signed Minor Loop Offset #define DMA_TCD19_SLAST (*(volatile int32_t *)0x4000926C) // TCD Last Source Addr Adj. #define DMA_TCD19_DADDR (*(volatile void * volatile *)0x40009270) // TCD Destination Address #define DMA_TCD19_DOFF (*(volatile int16_t *)0x40009274) // TCD Signed Dest Address Offset #define DMA_TCD19_CITER_ELINKYES (*(volatile uint16_t *)0x40009276) // TCD Current Minor Loop Link #define DMA_TCD19_CITER_ELINKNO (*(volatile uint16_t *)0x40009276) // ?? #define DMA_TCD19_DLASTSGA (*(volatile int32_t *)0x40009278) // TCD Last Destination Addr Adj #define DMA_TCD19_CSR (*(volatile uint16_t *)0x4000927C) // TCD Control and Status #define DMA_TCD19_BITER_ELINKYES (*(volatile uint16_t *)0x4000927E) // TCD Beginning Minor Loop Link #define DMA_TCD19_BITER_ELINKNO (*(volatile uint16_t *)0x4000927E) // TCD Beginning Minor Loop Link #define DMA_TCD20_SADDR (*(volatile const void * volatile *)0x40009280) // TCD Source Addr #define DMA_TCD20_SOFF (*(volatile int16_t *)0x40009284) // TCD Signed Source Address Offset #define DMA_TCD20_ATTR (*(volatile uint16_t *)0x40009286) // TCD Transfer Attributes #define DMA_TCD20_NBYTES_MLNO (*(volatile uint32_t *)0x40009288) // TCD Minor Byte Count #define DMA_TCD20_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009288) // TCD Signed Minor Loop Offset #define DMA_TCD20_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009288) // TCD Signed Minor Loop Offset #define DMA_TCD20_SLAST (*(volatile int32_t *)0x4000928C) // TCD Last Source Addr Adj. #define DMA_TCD20_DADDR (*(volatile void * volatile *)0x40009290) // TCD Destination Address #define DMA_TCD20_DOFF (*(volatile int16_t *)0x40009294) // TCD Signed Dest Address Offset #define DMA_TCD20_CITER_ELINKYES (*(volatile uint16_t *)0x40009296) // TCD Current Minor Loop Link #define DMA_TCD20_CITER_ELINKNO (*(volatile uint16_t *)0x40009296) // ?? #define DMA_TCD20_DLASTSGA (*(volatile int32_t *)0x40009298) // TCD Last Destination Addr Adj #define DMA_TCD20_CSR (*(volatile uint16_t *)0x4000929C) // TCD Control and Status #define DMA_TCD20_BITER_ELINKYES (*(volatile uint16_t *)0x4000929E) // TCD Beginning Minor Loop Link #define DMA_TCD20_BITER_ELINKNO (*(volatile uint16_t *)0x4000929E) // TCD Beginning Minor Loop Link #define DMA_TCD21_SADDR (*(volatile const void * volatile *)0x400092A0) // TCD Source Addr #define DMA_TCD21_SOFF (*(volatile int16_t *)0x400092A4) // TCD Signed Source Address Offset #define DMA_TCD21_ATTR (*(volatile uint16_t *)0x400092A6) // TCD Transfer Attributes #define DMA_TCD21_NBYTES_MLNO (*(volatile uint32_t *)0x400092A8) // TCD Minor Byte Count #define DMA_TCD21_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400092A8) // TCD Signed Minor Loop Offset #define DMA_TCD21_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400092A8) // TCD Signed Minor Loop Offset #define DMA_TCD21_SLAST (*(volatile int32_t *)0x400092AC) // TCD Last Source Addr Adj. #define DMA_TCD21_DADDR (*(volatile void * volatile *)0x400092B0) // TCD Destination Address #define DMA_TCD21_DOFF (*(volatile int16_t *)0x400092B4) // TCD Signed Dest Address Offset #define DMA_TCD21_CITER_ELINKYES (*(volatile uint16_t *)0x400092B6) // TCD Current Minor Loop Link #define DMA_TCD21_CITER_ELINKNO (*(volatile uint16_t *)0x400092B6) // ?? #define DMA_TCD21_DLASTSGA (*(volatile int32_t *)0x400092B8) // TCD Last Destination Addr Adj #define DMA_TCD21_CSR (*(volatile uint16_t *)0x400092BC) // TCD Control and Status #define DMA_TCD21_BITER_ELINKYES (*(volatile uint16_t *)0x400092BE) // TCD Beginning Minor Loop Link #define DMA_TCD21_BITER_ELINKNO (*(volatile uint16_t *)0x400092BE) // TCD Beginning Minor Loop Link #define DMA_TCD22_SADDR (*(volatile const void * volatile *)0x400092C0) // TCD Source Addr #define DMA_TCD22_SOFF (*(volatile int16_t *)0x400092C4) // TCD Signed Source Address Offset #define DMA_TCD22_ATTR (*(volatile uint16_t *)0x400092C6) // TCD Transfer Attributes #define DMA_TCD22_NBYTES_MLNO (*(volatile uint32_t *)0x400092C8) // TCD Minor Byte Count #define DMA_TCD22_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400092C8) // TCD Signed Minor Loop Offset #define DMA_TCD22_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400092C8) // TCD Signed Minor Loop Offset #define DMA_TCD22_SLAST (*(volatile int32_t *)0x400092CC) // TCD Last Source Addr Adj. #define DMA_TCD22_DADDR (*(volatile void * volatile *)0x400092D0) // TCD Destination Address #define DMA_TCD22_DOFF (*(volatile int16_t *)0x400092D4) // TCD Signed Dest Address Offset #define DMA_TCD22_CITER_ELINKYES (*(volatile uint16_t *)0x400092D6) // TCD Current Minor Loop Link #define DMA_TCD22_CITER_ELINKNO (*(volatile uint16_t *)0x400092D6) // ?? #define DMA_TCD22_DLASTSGA (*(volatile int32_t *)0x400092D8) // TCD Last Destination Addr Adj #define DMA_TCD22_CSR (*(volatile uint16_t *)0x400092DC) // TCD Control and Status #define DMA_TCD22_BITER_ELINKYES (*(volatile uint16_t *)0x400092DE) // TCD Beginning Minor Loop Link #define DMA_TCD22_BITER_ELINKNO (*(volatile uint16_t *)0x400092DE) // TCD Beginning Minor Loop Link #define DMA_TCD23_SADDR (*(volatile const void * volatile *)0x400092E0) // TCD Source Addr #define DMA_TCD23_SOFF (*(volatile int16_t *)0x400092E4) // TCD Signed Source Address Offset #define DMA_TCD23_ATTR (*(volatile uint16_t *)0x400092E6) // TCD Transfer Attributes #define DMA_TCD23_NBYTES_MLNO (*(volatile uint32_t *)0x400092E8) // TCD Minor Byte Count #define DMA_TCD23_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400092E8) // TCD Signed Minor Loop Offset #define DMA_TCD23_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400092E8) // TCD Signed Minor Loop Offset #define DMA_TCD23_SLAST (*(volatile int32_t *)0x400092EC) // TCD Last Source Addr Adj. #define DMA_TCD23_DADDR (*(volatile void * volatile *)0x400092F0) // TCD Destination Address #define DMA_TCD23_DOFF (*(volatile int16_t *)0x400092F4) // TCD Signed Dest Address Offset #define DMA_TCD23_CITER_ELINKYES (*(volatile uint16_t *)0x400092F6) // TCD Current Minor Loop Link #define DMA_TCD23_CITER_ELINKNO (*(volatile uint16_t *)0x400092F6) // ?? #define DMA_TCD23_DLASTSGA (*(volatile int32_t *)0x400092F8) // TCD Last Destination Addr Adj #define DMA_TCD23_CSR (*(volatile uint16_t *)0x400092FC) // TCD Control and Status #define DMA_TCD23_BITER_ELINKYES (*(volatile uint16_t *)0x400092FE) // TCD Beginning Minor Loop Link #define DMA_TCD23_BITER_ELINKNO (*(volatile uint16_t *)0x400092FE) // TCD Beginning Minor Loop Link #define DMA_TCD24_SADDR (*(volatile const void * volatile *)0x40009300) // TCD Source Addr #define DMA_TCD24_SOFF (*(volatile int16_t *)0x40009304) // TCD Signed Source Address Offset #define DMA_TCD24_ATTR (*(volatile uint16_t *)0x40009306) // TCD Transfer Attributes #define DMA_TCD24_NBYTES_MLNO (*(volatile uint32_t *)0x40009308) // TCD Minor Byte Count #define DMA_TCD24_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009308) // TCD Signed Minor Loop Offset #define DMA_TCD24_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009308) // TCD Signed Minor Loop Offset #define DMA_TCD24_SLAST (*(volatile int32_t *)0x4000930C) // TCD Last Source Addr Adj. #define DMA_TCD24_DADDR (*(volatile void * volatile *)0x40009310) // TCD Destination Address #define DMA_TCD24_DOFF (*(volatile int16_t *)0x40009314) // TCD Signed Dest Address Offset #define DMA_TCD24_CITER_ELINKYES (*(volatile uint16_t *)0x40009316) // TCD Current Minor Loop Link #define DMA_TCD24_CITER_ELINKNO (*(volatile uint16_t *)0x40009316) // ?? #define DMA_TCD24_DLASTSGA (*(volatile int32_t *)0x40009318) // TCD Last Destination Addr Adj #define DMA_TCD24_CSR (*(volatile uint16_t *)0x4000931C) // TCD Control and Status #define DMA_TCD24_BITER_ELINKYES (*(volatile uint16_t *)0x4000931E) // TCD Beginning Minor Loop Link #define DMA_TCD24_BITER_ELINKNO (*(volatile uint16_t *)0x4000931E) // TCD Beginning Minor Loop Link #define DMA_TCD25_SADDR (*(volatile const void * volatile *)0x40009320) // TCD Source Addr #define DMA_TCD25_SOFF (*(volatile int16_t *)0x40009324) // TCD Signed Source Address Offset #define DMA_TCD25_ATTR (*(volatile uint16_t *)0x40009326) // TCD Transfer Attributes #define DMA_TCD25_NBYTES_MLNO (*(volatile uint32_t *)0x40009328) // TCD Minor Byte Count #define DMA_TCD25_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009328) // TCD Signed Minor Loop Offset #define DMA_TCD25_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009328) // TCD Signed Minor Loop Offset #define DMA_TCD25_SLAST (*(volatile int32_t *)0x4000932C) // TCD Last Source Addr Adj. #define DMA_TCD25_DADDR (*(volatile void * volatile *)0x40009330) // TCD Destination Address #define DMA_TCD25_DOFF (*(volatile int16_t *)0x40009334) // TCD Signed Dest Address Offset #define DMA_TCD25_CITER_ELINKYES (*(volatile uint16_t *)0x40009336) // TCD Current Minor Loop Link #define DMA_TCD25_CITER_ELINKNO (*(volatile uint16_t *)0x40009336) // ?? #define DMA_TCD25_DLASTSGA (*(volatile int32_t *)0x40009338) // TCD Last Destination Addr Adj #define DMA_TCD25_CSR (*(volatile uint16_t *)0x4000933C) // TCD Control and Status #define DMA_TCD25_BITER_ELINKYES (*(volatile uint16_t *)0x4000933E) // TCD Beginning Minor Loop Link #define DMA_TCD25_BITER_ELINKNO (*(volatile uint16_t *)0x4000933E) // TCD Beginning Minor Loop Link #define DMA_TCD26_SADDR (*(volatile const void * volatile *)0x40009340) // TCD Source Addr #define DMA_TCD26_SOFF (*(volatile int16_t *)0x40009344) // TCD Signed Source Address Offset #define DMA_TCD26_ATTR (*(volatile uint16_t *)0x40009346) // TCD Transfer Attributes #define DMA_TCD26_NBYTES_MLNO (*(volatile uint32_t *)0x40009348) // TCD Minor Byte Count #define DMA_TCD26_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009348) // TCD Signed Minor Loop Offset #define DMA_TCD26_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009348) // TCD Signed Minor Loop Offset #define DMA_TCD26_SLAST (*(volatile int32_t *)0x4000934C) // TCD Last Source Addr Adj. #define DMA_TCD26_DADDR (*(volatile void * volatile *)0x40009350) // TCD Destination Address #define DMA_TCD26_DOFF (*(volatile int16_t *)0x40009354) // TCD Signed Dest Address Offset #define DMA_TCD26_CITER_ELINKYES (*(volatile uint16_t *)0x40009356) // TCD Current Minor Loop Link #define DMA_TCD26_CITER_ELINKNO (*(volatile uint16_t *)0x40009356) // ?? #define DMA_TCD26_DLASTSGA (*(volatile int32_t *)0x40009358) // TCD Last Destination Addr Adj #define DMA_TCD26_CSR (*(volatile uint16_t *)0x4000935C) // TCD Control and Status #define DMA_TCD26_BITER_ELINKYES (*(volatile uint16_t *)0x4000935E) // TCD Beginning Minor Loop Link #define DMA_TCD26_BITER_ELINKNO (*(volatile uint16_t *)0x4000935E) // TCD Beginning Minor Loop Link #define DMA_TCD27_SADDR (*(volatile const void * volatile *)0x40009360) // TCD Source Addr #define DMA_TCD27_SOFF (*(volatile int16_t *)0x40009364) // TCD Signed Source Address Offset #define DMA_TCD27_ATTR (*(volatile uint16_t *)0x40009366) // TCD Transfer Attributes #define DMA_TCD27_NBYTES_MLNO (*(volatile uint32_t *)0x40009368) // TCD Minor Byte Count #define DMA_TCD27_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009368) // TCD Signed Minor Loop Offset #define DMA_TCD27_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009368) // TCD Signed Minor Loop Offset #define DMA_TCD27_SLAST (*(volatile int32_t *)0x4000936C) // TCD Last Source Addr Adj. #define DMA_TCD27_DADDR (*(volatile void * volatile *)0x40009370) // TCD Destination Address #define DMA_TCD27_DOFF (*(volatile int16_t *)0x40009374) // TCD Signed Dest Address Offset #define DMA_TCD27_CITER_ELINKYES (*(volatile uint16_t *)0x40009376) // TCD Current Minor Loop Link #define DMA_TCD27_CITER_ELINKNO (*(volatile uint16_t *)0x40009376) // ?? #define DMA_TCD27_DLASTSGA (*(volatile int32_t *)0x40009378) // TCD Last Destination Addr Adj #define DMA_TCD27_CSR (*(volatile uint16_t *)0x4000937C) // TCD Control and Status #define DMA_TCD27_BITER_ELINKYES (*(volatile uint16_t *)0x4000937E) // TCD Beginning Minor Loop Link #define DMA_TCD27_BITER_ELINKNO (*(volatile uint16_t *)0x4000937E) // TCD Beginning Minor Loop Link #define DMA_TCD28_SADDR (*(volatile const void * volatile *)0x40009380) // TCD Source Addr #define DMA_TCD28_SOFF (*(volatile int16_t *)0x40009384) // TCD Signed Source Address Offset #define DMA_TCD28_ATTR (*(volatile uint16_t *)0x40009386) // TCD Transfer Attributes #define DMA_TCD28_NBYTES_MLNO (*(volatile uint32_t *)0x40009388) // TCD Minor Byte Count #define DMA_TCD28_NBYTES_MLOFFNO (*(volatile uint32_t *)0x40009388) // TCD Signed Minor Loop Offset #define DMA_TCD28_NBYTES_MLOFFYES (*(volatile uint32_t *)0x40009388) // TCD Signed Minor Loop Offset #define DMA_TCD28_SLAST (*(volatile int32_t *)0x4000938C) // TCD Last Source Addr Adj. #define DMA_TCD28_DADDR (*(volatile void * volatile *)0x40009390) // TCD Destination Address #define DMA_TCD28_DOFF (*(volatile int16_t *)0x40009394) // TCD Signed Dest Address Offset #define DMA_TCD28_CITER_ELINKYES (*(volatile uint16_t *)0x40009396) // TCD Current Minor Loop Link #define DMA_TCD28_CITER_ELINKNO (*(volatile uint16_t *)0x40009396) // ?? #define DMA_TCD28_DLASTSGA (*(volatile int32_t *)0x40009398) // TCD Last Destination Addr Adj #define DMA_TCD28_CSR (*(volatile uint16_t *)0x4000939C) // TCD Control and Status #define DMA_TCD28_BITER_ELINKYES (*(volatile uint16_t *)0x4000939E) // TCD Beginning Minor Loop Link #define DMA_TCD28_BITER_ELINKNO (*(volatile uint16_t *)0x4000939E) // TCD Beginning Minor Loop Link #define DMA_TCD29_SADDR (*(volatile const void * volatile *)0x400093A0) // TCD Source Addr #define DMA_TCD29_SOFF (*(volatile int16_t *)0x400093A4) // TCD Signed Source Address Offset #define DMA_TCD29_ATTR (*(volatile uint16_t *)0x400093A6) // TCD Transfer Attributes #define DMA_TCD29_NBYTES_MLNO (*(volatile uint32_t *)0x400093A8) // TCD Minor Byte Count #define DMA_TCD29_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400093A8) // TCD Signed Minor Loop Offset #define DMA_TCD29_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400093A8) // TCD Signed Minor Loop Offset #define DMA_TCD29_SLAST (*(volatile int32_t *)0x400093AC) // TCD Last Source Addr Adj. #define DMA_TCD29_DADDR (*(volatile void * volatile *)0x400093B0) // TCD Destination Address #define DMA_TCD29_DOFF (*(volatile int16_t *)0x400093B4) // TCD Signed Dest Address Offset #define DMA_TCD29_CITER_ELINKYES (*(volatile uint16_t *)0x400093B6) // TCD Current Minor Loop Link #define DMA_TCD29_CITER_ELINKNO (*(volatile uint16_t *)0x400093B6) // ?? #define DMA_TCD29_DLASTSGA (*(volatile int32_t *)0x400093B8) // TCD Last Destination Addr Adj #define DMA_TCD29_CSR (*(volatile uint16_t *)0x400093BC) // TCD Control and Status #define DMA_TCD29_BITER_ELINKYES (*(volatile uint16_t *)0x400093BE) // TCD Beginning Minor Loop Link #define DMA_TCD29_BITER_ELINKNO (*(volatile uint16_t *)0x400093BE) // TCD Beginning Minor Loop Link #define DMA_TCD30_SADDR (*(volatile const void * volatile *)0x400093C0) // TCD Source Addr #define DMA_TCD30_SOFF (*(volatile int16_t *)0x400093C4) // TCD Signed Source Address Offset #define DMA_TCD30_ATTR (*(volatile uint16_t *)0x400093C6) // TCD Transfer Attributes #define DMA_TCD30_NBYTES_MLNO (*(volatile uint32_t *)0x400093C8) // TCD Minor Byte Count #define DMA_TCD30_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400093C8) // TCD Signed Minor Loop Offset #define DMA_TCD30_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400093C8) // TCD Signed Minor Loop Offset #define DMA_TCD30_SLAST (*(volatile int32_t *)0x400093CC) // TCD Last Source Addr Adj. #define DMA_TCD30_DADDR (*(volatile void * volatile *)0x400093D0) // TCD Destination Address #define DMA_TCD30_DOFF (*(volatile int16_t *)0x400093D4) // TCD Signed Dest Address Offset #define DMA_TCD30_CITER_ELINKYES (*(volatile uint16_t *)0x400093D6) // TCD Current Minor Loop Link #define DMA_TCD30_CITER_ELINKNO (*(volatile uint16_t *)0x400093D6) // ?? #define DMA_TCD30_DLASTSGA (*(volatile int32_t *)0x400093D8) // TCD Last Destination Addr Adj #define DMA_TCD30_CSR (*(volatile uint16_t *)0x400093DC) // TCD Control and Status #define DMA_TCD30_BITER_ELINKYES (*(volatile uint16_t *)0x400093DE) // TCD Beginning Minor Loop Link #define DMA_TCD30_BITER_ELINKNO (*(volatile uint16_t *)0x400093DE) // TCD Beginning Minor Loop Link #define DMA_TCD31_SADDR (*(volatile const void * volatile *)0x400093E0) // TCD Source Addr #define DMA_TCD31_SOFF (*(volatile int16_t *)0x400093E4) // TCD Signed Source Address Offset #define DMA_TCD31_ATTR (*(volatile uint16_t *)0x400093E6) // TCD Transfer Attributes #define DMA_TCD31_NBYTES_MLNO (*(volatile uint32_t *)0x400093E8) // TCD Minor Byte Count #define DMA_TCD31_NBYTES_MLOFFNO (*(volatile uint32_t *)0x400093E8) // TCD Signed Minor Loop Offset #define DMA_TCD31_NBYTES_MLOFFYES (*(volatile uint32_t *)0x400093E8) // TCD Signed Minor Loop Offset #define DMA_TCD31_SLAST (*(volatile int32_t *)0x400093EC) // TCD Last Source Addr Adj. #define DMA_TCD31_DADDR (*(volatile void * volatile *)0x400093F0) // TCD Destination Address #define DMA_TCD31_DOFF (*(volatile int16_t *)0x400093F4) // TCD Signed Dest Address Offset #define DMA_TCD31_CITER_ELINKYES (*(volatile uint16_t *)0x400093F6) // TCD Current Minor Loop Link #define DMA_TCD31_CITER_ELINKNO (*(volatile uint16_t *)0x400093F6) // ?? #define DMA_TCD31_DLASTSGA (*(volatile int32_t *)0x400093F8) // TCD Last Destination Addr Adj #define DMA_TCD31_CSR (*(volatile uint16_t *)0x400093FC) // TCD Control and Status #define DMA_TCD31_BITER_ELINKYES (*(volatile uint16_t *)0x400093FE) // TCD Beginning Minor Loop Link #define DMA_TCD31_BITER_ELINKNO (*(volatile uint16_t *)0x400093FE) // TCD Beginning Minor Loop Link #endif #elif defined(KINETISL) #define DMA_SAR0 (*(volatile const void * volatile *)0x40008100) // Source Address #define DMA_DAR0 (*(volatile void * volatile *)0x40008104) // Destination Address #define DMA_DSR_BCR0 (*(volatile uint32_t *)0x40008108) // Status / Byte Count #define DMA_DCR0 (*(volatile uint32_t *)0x4000810C) // Control #define DMA_SAR1 (*(volatile const void * volatile *)0x40008110) // Source Address #define DMA_DAR1 (*(volatile void * volatile *)0x40008114) // Destination Address #define DMA_DSR_BCR1 (*(volatile uint32_t *)0x40008118) // Status / Byte Count #define DMA_DCR1 (*(volatile uint32_t *)0x4000811C) // Control #define DMA_SAR2 (*(volatile const void * volatile *)0x40008120) // Source Address #define DMA_DAR2 (*(volatile void * volatile *)0x40008124) // Destination Address #define DMA_DSR_BCR2 (*(volatile uint32_t *)0x40008128) // Status / Byte Count #define DMA_DCR2 (*(volatile uint32_t *)0x4000812C) // Control #define DMA_SAR3 (*(volatile const void * volatile *)0x40008130) // Source Address #define DMA_DAR3 (*(volatile void * volatile *)0x40008134) // Destination Address #define DMA_DSR_BCR3 (*(volatile uint32_t *)0x40008138) // Status / Byte Count #define DMA_DCR3 (*(volatile uint32_t *)0x4000813C) // Control #define DMA_DSR_BCR_CE ((uint32_t)0x40000000) // Configuration Error #define DMA_DSR_BCR_BES ((uint32_t)0x20000000) // Bus Error on Source #define DMA_DSR_BCR_BED ((uint32_t)0x10000000) // Bus Error on Destination #define DMA_DSR_BCR_REQ ((uint32_t)0x04000000) // Request #define DMA_DSR_BCR_BSY ((uint32_t)0x02000000) // Busy #define DMA_DSR_BCR_DONE ((uint32_t)0x01000000) // Transactions Done #define DMA_DSR_BCR_BCR(n) ((n) & 0x00FFFFFF) // Byte Count Remaining #define DMA_DCR_EINT ((uint32_t)0x80000000) // Enable Interrupt on Completion #define DMA_DCR_ERQ ((uint32_t)0x40000000) // Enable Peripheral Request #define DMA_DCR_CS ((uint32_t)0x20000000) // Cycle Steal #define DMA_DCR_AA ((uint32_t)0x10000000) // Auto-align #define DMA_DCR_EADREQ ((uint32_t)0x00800000) // Enable asynchronous DMA requests #define DMA_DCR_SINC ((uint32_t)0x00400000) // Source Increment #define DMA_DCR_SSIZE(n) (((n) & 3) << 20) // Source Size, 0=32, 1=8, 2=16 #define DMA_DCR_DINC ((uint32_t)0x00080000) // Destination Increment #define DMA_DCR_DSIZE(n) (((n) & 3) << 17) // Dest Size, 0=32, 1=8, 2=16 #define DMA_DCR_START ((uint32_t)0x00010000) // Start Transfer #define DMA_DCR_SMOD(n) (((n) & 15) << 12) // Source Address Modulo #define DMA_DCR_DMOD(n) (((n) & 15) << 8) // Destination Address Modulo #define DMA_DCR_D_REQ ((uint32_t)0x00000080) // Disable Request #define DMA_DCR_LINKCC(n) (((n) & 3) << 4) // Link Channel Control #define DMA_DCR_LCH1(n) (((n) & 3) << 2) // Link Channel 1 #define DMA_DCR_LCH2(n) (((n) & 3) << 0) // Link Channel 2 #endif // External Watchdog Monitor (EWM) #define EWM_CTRL (*(volatile uint8_t *)0x40061000) // Control Register #define EWM_SERV (*(volatile uint8_t *)0x40061001) // Service Register #define EWM_CMPL (*(volatile uint8_t *)0x40061002) // Compare Low Register #define EWM_CMPH (*(volatile uint8_t *)0x40061003) // Compare High Register // Watchdog Timer (WDOG) #define WDOG_STCTRLH (*(volatile uint16_t *)0x40052000) // Watchdog Status and Control Register High #define WDOG_STCTRLH_DISTESTWDOG ((uint16_t)0x4000) // Allows the WDOG's functional test mode to be disabled permanently. #define WDOG_STCTRLH_BYTESEL(n) ((uint16_t)(((n) & 3) << 12)) // selects the byte to be tested when the watchdog is in the byte test mode. #define WDOG_STCTRLH_TESTSEL ((uint16_t)0x0800) #define WDOG_STCTRLH_TESTWDOG ((uint16_t)0x0400) #define WDOG_STCTRLH_WAITEN ((uint16_t)0x0080) #define WDOG_STCTRLH_STOPEN ((uint16_t)0x0040) #define WDOG_STCTRLH_DBGEN ((uint16_t)0x0020) #define WDOG_STCTRLH_ALLOWUPDATE ((uint16_t)0x0010) #define WDOG_STCTRLH_WINEN ((uint16_t)0x0008) #define WDOG_STCTRLH_IRQRSTEN ((uint16_t)0x0004) #define WDOG_STCTRLH_CLKSRC ((uint16_t)0x0002) #define WDOG_STCTRLH_WDOGEN ((uint16_t)0x0001) #define WDOG_STCTRLL (*(volatile uint16_t *)0x40052002) // Watchdog Status and Control Register Low #define WDOG_TOVALH (*(volatile uint16_t *)0x40052004) // Watchdog Time-out Value Register High #define WDOG_TOVALL (*(volatile uint16_t *)0x40052006) // Watchdog Time-out Value Register Low #define WDOG_WINH (*(volatile uint16_t *)0x40052008) // Watchdog Window Register High #define WDOG_WINL (*(volatile uint16_t *)0x4005200A) // Watchdog Window Register Low #define WDOG_REFRESH (*(volatile uint16_t *)0x4005200C) // Watchdog Refresh register #define WDOG_UNLOCK (*(volatile uint16_t *)0x4005200E) // Watchdog Unlock register #define WDOG_UNLOCK_SEQ1 ((uint16_t)0xC520) #define WDOG_UNLOCK_SEQ2 ((uint16_t)0xD928) #define WDOG_TMROUTH (*(volatile uint16_t *)0x40052010) // Watchdog Timer Output Register High #define WDOG_TMROUTL (*(volatile uint16_t *)0x40052012) // Watchdog Timer Output Register Low #define WDOG_RSTCNT (*(volatile uint16_t *)0x40052014) // Watchdog Reset Count register #define WDOG_PRESC (*(volatile uint16_t *)0x40052016) // Watchdog Prescaler register // Multipurpose Clock Generator (MCG) typedef struct { volatile uint8_t C1; volatile uint8_t C2; volatile uint8_t C3; volatile uint8_t C4; volatile uint8_t C5; volatile uint8_t C6; volatile uint8_t S; volatile uint8_t unused1; volatile uint8_t SC; volatile uint8_t unused2; volatile uint8_t ATCVH; volatile uint8_t ATCVL; volatile uint8_t C7; volatile uint8_t C8; volatile uint8_t C9; volatile uint8_t unused3; volatile uint8_t C11; volatile uint8_t C12; volatile uint8_t S2; volatile uint8_t T3; } KINETIS_MCG_t; #define KINETIS_MCG (*(KINETIS_MCG_t *)0x40064000) #define MCG_C1 (KINETIS_MCG.C1) // 40064000 MCG Control 1 Register #define MCG_C1_IREFSTEN (uint8_t)0x01 // Internal Reference Stop Enable, Controls whether or not the internal reference clock remains enabled when the MCG enters Stop mode. #define MCG_C1_IRCLKEN (uint8_t)0x02 // Internal Reference Clock Enable, Enables the internal reference clock for use as MCGIRCLK. #define MCG_C1_IREFS (uint8_t)0x04 // Internal Reference Select, Selects the reference clock source for the FLL. #define MCG_C1_FRDIV(n) (uint8_t)(((n) & 0x07) << 3) // FLL External Reference Divider, Selects the amount to divide down the external reference clock for the FLL #define MCG_C1_CLKS(n) (uint8_t)(((n) & 0x03) << 6) // Clock Source Select, Selects the clock source for MCGOUTCLK #define MCG_C2 (KINETIS_MCG.C2) // 40064001 MCG Control 2 Register #define MCG_C2_IRCS (uint8_t)0x01 // Internal Reference Clock Select, Selects between the fast or slow internal reference clock source. #define MCG_C2_LP (uint8_t)0x02 // Low Power Select, Controls whether the FLL or PLL is disabled in BLPI and BLPE modes. #define MCG_C2_EREFS (uint8_t)0x04 // External Reference Select, Selects the source for the external reference clock. #define MCG_C2_HGO0 (uint8_t)0x08 // High Gain Oscillator Select, Controls the crystal oscillator mode of operation #define MCG_C2_RANGE0(n) (uint8_t)(((n) & 0x03) << 4) // Frequency Range Select, Selects the frequency range for the crystal oscillator #define MCG_C2_LOCRE0 (uint8_t)0x80 // Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0 #define MCG_C3 (KINETIS_MCG.C3) // 40064002 MCG Control 3 Register #define MCG_C3_SCTRIM(n) (uint8_t)(n) // Slow Internal Reference Clock Trim Setting #define MCG_C4 (KINETIS_MCG.C4) // 40064003 MCG Control 4 Register #define MCG_C4_SCFTRIM (uint8_t)0x01 // Slow Internal Reference Clock Fine Trim #define MCG_C4_FCTRIM(n) (uint8_t)(((n) & 0x0F) << 1) // Fast Internal Reference Clock Trim Setting #define MCG_C4_DRST_DRS(n) (uint8_t)(((n) & 0x03) << 5) // DCO Range Select #define MCG_C4_DMX32 (uint8_t)0x80 // DCO Maximum Frequency with 32.768 kHz Reference, controls whether the DCO frequency range is narrowed #define MCG_C5 (KINETIS_MCG.C5) // 40064004 MCG Control 5 Register #define MCG_C5_PRDIV0(n) (uint8_t)((n) & 0x1F) // PLL External Reference Divider #define MCG_C5_PLLSTEN0 (uint8_t)0x20 // PLL Stop Enable #define MCG_C5_PLLCLKEN0 (uint8_t)0x40 // PLL Clock Enable #define MCG_C6 (KINETIS_MCG.C6) // 40064005 MCG Control 6 Register #define MCG_C6_VDIV0(n) (uint8_t)((n) & 0x1F) // VCO 0 Divider #define MCG_C6_CME0 (uint8_t)0x20 // Clock Monitor Enable #define MCG_C6_PLLS (uint8_t)0x40 // PLL Select, Controls whether the PLL or FLL output is selected as the MCG source when CLKS[1:0]=00. #define MCG_C6_LOLIE0 (uint8_t)0x80 // Loss of Lock Interrrupt Enable #define MCG_S (KINETIS_MCG.S) // 40064006 MCG Status Register #define MCG_S_IRCST (uint8_t)0x01 // Internal Reference Clock Status #define MCG_S_OSCINIT0 (uint8_t)0x02 // OSC Initialization, resets to 0, is set to 1 after the initialization cycles of the crystal oscillator #define MCG_S_CLKST(n) (uint8_t)(((n) & 0x03) << 2) // Clock Mode Status, 0=FLL is selected, 1= Internal ref, 2=External ref, 3=PLL #define MCG_S_CLKST_MASK (uint8_t)0x0C #define MCG_S_IREFST (uint8_t)0x10 // Internal Reference Status #define MCG_S_PLLST (uint8_t)0x20 // PLL Select Status #define MCG_S_LOCK0 (uint8_t)0x40 // Lock Status, 0=PLL Unlocked, 1=PLL Locked #define MCG_S_LOLS0 (uint8_t)0x80 // Loss of Lock Status #define MCG_SC (KINETIS_MCG.SC) // 40064008 MCG Status and Control Register #define MCG_SC_LOCS0 (uint8_t)0x01 // OSC0 Loss of Clock Status #define MCG_SC_FCRDIV(n) (uint8_t)(((n) & 0x07) << 1) // Fast Clock Internal Reference Divider #define MCG_SC_FLTPRSRV (uint8_t)0x10 // FLL Filter Preserve Enable #define MCG_SC_ATMF (uint8_t)0x20 // Automatic Trim Machine Fail Flag #define MCG_SC_ATMS (uint8_t)0x40 // Automatic Trim Machine Select #define MCG_SC_ATME (uint8_t)0x80 // Automatic Trim Machine Enable #define MCG_ATCVH (KINETIS_MCG.ATCVH) // 4006400A MCG Auto Trim Compare Value High Register #define MCG_ATCVL (KINETIS_MCG.ATCVL) // 4006400B MCG Auto Trim Compare Value Low Register #define MCG_C7 (KINETIS_MCG.C7) // 4006400C MCG Control 7 Register #define MCG_C8 (KINETIS_MCG.C8) // 4006400D MCG Control 8 Register #define MCG_C9 (KINETIS_MCG.C9) // 4006400E MCG Control 9 Register #define MCG_C11 (KINETIS_MCG.C11) // 40064010 MCG Control 11 Register #define MCG_C12 (KINETIS_MCG.C12) // 40064011 MCG Control 12 Register #define MCG_S2 (KINETIS_MCG.S2) // 40064012 MCG Status 2 Register #define MCG_T3 (KINETIS_MCG.T3) // 40064013 MCG Test 3 Register // Oscillator (OSC) #define OSC0_CR (*(volatile uint8_t *)0x40065000) // OSC Control Register #define OSC_SC16P ((uint8_t)0x01) // Oscillator 16 pF Capacitor Load Configure #define OSC_SC8P ((uint8_t)0x02) // Oscillator 8 pF Capacitor Load Configure #define OSC_SC4P ((uint8_t)0x04) // Oscillator 4 pF Capacitor Load Configure #define OSC_SC2P ((uint8_t)0x08) // Oscillator 2 pF Capacitor Load Configure #define OSC_EREFSTEN ((uint8_t)0x20) // External Reference Stop Enable, Controls whether or not the external reference clock (OSCERCLK) remains enabled when MCU enters Stop mode. #define OSC_ERCLKEN ((uint8_t)0x80) // External Reference Enable, Enables external reference clock (OSCERCLK). #define OSC0_OSC_DIV (*(volatile uint8_t *)0x40065002) // Clock divider register // Local Memory Controller #define LMEM_PCCCR (*(volatile uint32_t *)0xE0082000) // Cache control register #define LMEM_PCCLCR (*(volatile uint32_t *)0xE0082004) // Cache line control register #define LMEM_PCCSAR (*(volatile uint32_t *)0xE0082008) // Cache search address register #define LMEM_PCCCVR (*(volatile uint32_t *)0xE008200C) // Cache read/write value register #define LMEM_PCCRMR (*(volatile uint32_t *)0xE0082020) // Cache regions mode register // Flash Memory Controller (FMC) #define FMC_PFAPR (*(volatile uint32_t *)0x4001F000) // Flash Access Protection #define FMC_PFB0CR (*(volatile uint32_t *)0x4001F004) // Flash Control #define FMC_TAGVDW0S0 (*(volatile uint32_t *)0x4001F100) // Cache Tag Storage #define FMC_TAGVDW0S1 (*(volatile uint32_t *)0x4001F104) // Cache Tag Storage #define FMC_TAGVDW1S0 (*(volatile uint32_t *)0x4001F108) // Cache Tag Storage #define FMC_TAGVDW1S1 (*(volatile uint32_t *)0x4001F10C) // Cache Tag Storage #define FMC_TAGVDW2S0 (*(volatile uint32_t *)0x4001F110) // Cache Tag Storage #define FMC_TAGVDW2S1 (*(volatile uint32_t *)0x4001F114) // Cache Tag Storage #define FMC_TAGVDW3S0 (*(volatile uint32_t *)0x4001F118) // Cache Tag Storage #define FMC_TAGVDW3S1 (*(volatile uint32_t *)0x4001F11C) // Cache Tag Storage #define FMC_DATAW0S0 (*(volatile uint32_t *)0x4001F200) // Cache Data Storage #define FMC_DATAW0S1 (*(volatile uint32_t *)0x4001F204) // Cache Data Storage #define FMC_DATAW1S0 (*(volatile uint32_t *)0x4001F208) // Cache Data Storage #define FMC_DATAW1S1 (*(volatile uint32_t *)0x4001F20C) // Cache Data Storage #define FMC_DATAW2S0 (*(volatile uint32_t *)0x4001F210) // Cache Data Storage #define FMC_DATAW2S1 (*(volatile uint32_t *)0x4001F214) // Cache Data Storage #define FMC_DATAW3S0 (*(volatile uint32_t *)0x4001F218) // Cache Data Storage #define FMC_DATAW3S1 (*(volatile uint32_t *)0x4001F21C) // Cache Data Storage // Flash Memory Module (FTFL) #define FTFL_FSTAT (*(volatile uint8_t *)0x40020000) // Flash Status Register #define FTFL_FSTAT_CCIF ((uint8_t)0x80) // Command Complete Interrupt Flag #define FTFL_FSTAT_RDCOLERR ((uint8_t)0x40) // Flash Read Collision Error Flag #define FTFL_FSTAT_ACCERR ((uint8_t)0x20) // Flash Access Error Flag #define FTFL_FSTAT_FPVIOL ((uint8_t)0x10) // Flash Protection Violation Flag #define FTFL_FSTAT_MGSTAT0 ((uint8_t)0x01) // Memory Controller Command Completion Status Flag #define FTFL_FCNFG (*(volatile uint8_t *)0x40020001) // Flash Configuration Register #define FTFL_FCNFG_CCIE ((uint8_t)0x80) // Command Complete Interrupt Enable #define FTFL_FCNFG_RDCOLLIE ((uint8_t)0x40) // Read Collision Error Interrupt Enable #define FTFL_FCNFG_ERSAREQ ((uint8_t)0x20) // Erase All Request #define FTFL_FCNFG_ERSSUSP ((uint8_t)0x10) // Erase Suspend #define FTFL_FCNFG_PFLSH ((uint8_t)0x04) // Flash memory configuration #define FTFL_FCNFG_RAMRDY ((uint8_t)0x02) // RAM Ready #define FTFL_FCNFG_EEERDY ((uint8_t)0x01) // EEPROM Ready #define FTFL_FSEC (*(const uint8_t *)0x40020002) // Flash Security Register #define FTFL_FOPT (*(const uint8_t *)0x40020003) // Flash Option Register #define FTFL_FCCOB3 (*(volatile uint8_t *)0x40020004) // Flash Common Command Object Registers #define FTFL_FCCOB2 (*(volatile uint8_t *)0x40020005) #define FTFL_FCCOB1 (*(volatile uint8_t *)0x40020006) #define FTFL_FCCOB0 (*(volatile uint8_t *)0x40020007) #define FTFL_FCCOB7 (*(volatile uint8_t *)0x40020008) #define FTFL_FCCOB6 (*(volatile uint8_t *)0x40020009) #define FTFL_FCCOB5 (*(volatile uint8_t *)0x4002000A) #define FTFL_FCCOB4 (*(volatile uint8_t *)0x4002000B) #define FTFL_FCCOBB (*(volatile uint8_t *)0x4002000C) #define FTFL_FCCOBA (*(volatile uint8_t *)0x4002000D) #define FTFL_FCCOB9 (*(volatile uint8_t *)0x4002000E) #define FTFL_FCCOB8 (*(volatile uint8_t *)0x4002000F) #define FTFL_FPROT3 (*(volatile uint8_t *)0x40020010) // Program Flash Protection Registers #define FTFL_FPROT2 (*(volatile uint8_t *)0x40020011) // Program Flash Protection Registers #define FTFL_FPROT1 (*(volatile uint8_t *)0x40020012) // Program Flash Protection Registers #define FTFL_FPROT0 (*(volatile uint8_t *)0x40020013) // Program Flash Protection Registers #define FTFL_FEPROT (*(volatile uint8_t *)0x40020016) // EEPROM Protection Register #define FTFL_FDPROT (*(volatile uint8_t *)0x40020017) // Data Flash Protection Register // Cyclic Redundancy Check (CRC) #define CRC_CRC (*(volatile uint32_t *)0x40032000) // CRC Data register #define CRC_GPOLY (*(volatile uint32_t *)0x40032004) // CRC Polynomial register #define CRC_CTRL (*(volatile uint32_t *)0x40032008) // CRC Control register // Cryptographic Acceleration Unit (CAU) #define CAU_CASR (*(volatile uint32_t *)0xE0081000) // Status Register #define CAU_CAA (*(volatile uint32_t *)0xE0081001) // Accumulator #define CAU_CA0 (*(volatile uint32_t *)0xE0081002) // General Purpose Register #define CAU_CA1 (*(volatile uint32_t *)0xE0081003) // General Purpose Register #define CAU_CA2 (*(volatile uint32_t *)0xE0081004) // General Purpose Register #define CAU_CA3 (*(volatile uint32_t *)0xE0081005) // General Purpose Register #define CAU_CA4 (*(volatile uint32_t *)0xE0081006) // General Purpose Register #define CAU_CA5 (*(volatile uint32_t *)0xE0081007) // General Purpose Register #define CAU_CA6 (*(volatile uint32_t *)0xE0081008) // General Purpose Register #define CAU_CA7 (*(volatile uint32_t *)0xE0081009) // General Purpose Register #define CAU_CA8 (*(volatile uint32_t *)0xE008100A) // General Purpose Register // Random Number Generator Accelerator (RNGA) #define RNG_CR (*(volatile uint32_t *)0x40029000) // RNGA Control Register #define RNG_SR (*(volatile uint32_t *)0x40029004) // RNGA Status Register #define RNG_ER (*(volatile uint32_t *)0x40029008) // RNGA Entropy Register #define RNG_OR (*(volatile uint32_t *)0x4002900C) // RNGA Output Register // Analog-to-Digital Converter (ADC) #define ADC0_SC1A (*(volatile uint32_t *)0x4003B000) // ADC status and control registers 1 #define ADC0_SC1B (*(volatile uint32_t *)0x4003B004) // ADC status and control registers 1 #define ADC_SC1_COCO ((uint32_t)0x80) // Conversion complete flag #define ADC_SC1_AIEN ((uint32_t)0x40) // Interrupt enable #define ADC_SC1_DIFF ((uint32_t)0x20) // Differential mode enable #define ADC_SC1_ADCH(n) ((uint32_t)((n) & 0x1F)) // Input channel select #define ADC0_CFG1 (*(volatile uint32_t *)0x4003B008) // ADC configuration register 1 #define ADC_CFG1_ADLPC ((uint32_t)0x80) // Low-power configuration #define ADC_CFG1_ADIV(n) ((uint32_t)(((n) & 3) << 5)) // Clock divide select, 0=direct, 1=div2, 2=div4, 3=div8 #define ADC_CFG1_ADLSMP ((uint32_t)0x10) // Sample time configuration, 0=Short, 1=Long #define ADC_CFG1_MODE(n) ((uint32_t)(((n) & 3) << 2)) // Conversion mode, 0=8 bit, 1=12 bit, 2=10 bit, 3=16 bit #define ADC_CFG1_ADICLK(n) ((uint32_t)(((n) & 3) << 0)) // Input clock, 0=bus, 1=bus/2, 2=OSCERCLK, 3=async #define ADC0_CFG2 (*(volatile uint32_t *)0x4003B00C) // Configuration register 2 #define ADC_CFG2_MUXSEL ((uint32_t)0x10) // 0=a channels, 1=b channels #define ADC_CFG2_ADACKEN ((uint32_t)0x08) // async clock enable #define ADC_CFG2_ADHSC ((uint32_t)0x04) // High speed configuration #define ADC_CFG2_ADLSTS(n) ((uint32_t)(((n) & 3) << 0)) // Sample time, 0=24 cycles, 1=12 cycles, 2=6 cycles, 3=2 cycles #define ADC0_RA (*(volatile uint32_t *)0x4003B010) // ADC data result register #define ADC0_RB (*(volatile uint32_t *)0x4003B014) // ADC data result register #define ADC0_CV1 (*(volatile uint32_t *)0x4003B018) // Compare value registers #define ADC0_CV2 (*(volatile uint32_t *)0x4003B01C) // Compare value registers #define ADC0_SC2 (*(volatile uint32_t *)0x4003B020) // Status and control register 2 #define ADC_SC2_ADACT ((uint32_t)0x80) // Conversion active #define ADC_SC2_ADTRG ((uint32_t)0x40) // Conversion trigger select, 0=software, 1=hardware #define ADC_SC2_ACFE ((uint32_t)0x20) // Compare function enable #define ADC_SC2_ACFGT ((uint32_t)0x10) // Compare function greater than enable #define ADC_SC2_ACREN ((uint32_t)0x08) // Compare function range enable #define ADC_SC2_DMAEN ((uint32_t)0x04) // DMA enable #define ADC_SC2_REFSEL(n) ((uint32_t)(((n) & 3) << 0)) // Voltage reference, 0=vcc/external, 1=1.2 volts #define ADC0_SC3 (*(volatile uint32_t *)0x4003B024) // Status and control register 3 #define ADC_SC3_CAL ((uint32_t)0x80) // Calibration, 1=begin, stays set while cal in progress #define ADC_SC3_CALF ((uint32_t)0x40) // Calibration failed flag #define ADC_SC3_ADCO ((uint32_t)0x08) // Continuous conversion enable #define ADC_SC3_AVGE ((uint32_t)0x04) // Hardware average enable #define ADC_SC3_AVGS(n) ((uint32_t)(((n) & 3) << 0)) // avg select, 0=4 samples, 1=8 samples, 2=16 samples, 3=32 samples #define ADC0_OFS (*(volatile uint32_t *)0x4003B028) // ADC offset correction register #define ADC0_PG (*(volatile uint32_t *)0x4003B02C) // ADC plus-side gain register #define ADC0_MG (*(volatile uint32_t *)0x4003B030) // ADC minus-side gain register #define ADC0_CLPD (*(volatile uint32_t *)0x4003B034) // ADC plus-side general calibration value register #define ADC0_CLPS (*(volatile uint32_t *)0x4003B038) // ADC plus-side general calibration value register #define ADC0_CLP4 (*(volatile uint32_t *)0x4003B03C) // ADC plus-side general calibration value register #define ADC0_CLP3 (*(volatile uint32_t *)0x4003B040) // ADC plus-side general calibration value register #define ADC0_CLP2 (*(volatile uint32_t *)0x4003B044) // ADC plus-side general calibration value register #define ADC0_CLP1 (*(volatile uint32_t *)0x4003B048) // ADC plus-side general calibration value register #define ADC0_CLP0 (*(volatile uint32_t *)0x4003B04C) // ADC plus-side general calibration value register #define ADC0_PGA (*(volatile uint32_t *)0x4003B050) // ADC Programmable Gain Amplifier #define ADC_PGA_PGAEN ((uint32_t)0x00800000) // Enable #define ADC_PGA_PGALPB ((uint32_t)0x00100000) // Low-Power Mode Control, 0=low power, 1=normal #define ADC_PGA_PGAG(n) ((uint32_t)(((n) & 15) << 16)) // Gain, 0=1X, 1=2X, 2=4X, 3=8X, 4=16X, 5=32X, 6=64X #define ADC0_CLMD (*(volatile uint32_t *)0x4003B054) // ADC minus-side general calibration value register #define ADC0_CLMS (*(volatile uint32_t *)0x4003B058) // ADC minus-side general calibration value register #define ADC0_CLM4 (*(volatile uint32_t *)0x4003B05C) // ADC minus-side general calibration value register #define ADC0_CLM3 (*(volatile uint32_t *)0x4003B060) // ADC minus-side general calibration value register #define ADC0_CLM2 (*(volatile uint32_t *)0x4003B064) // ADC minus-side general calibration value register #define ADC0_CLM1 (*(volatile uint32_t *)0x4003B068) // ADC minus-side general calibration value register #define ADC0_CLM0 (*(volatile uint32_t *)0x4003B06C) // ADC minus-side general calibration value register #define ADC1_SC1A (*(volatile uint32_t *)0x400BB000) // ADC status and control registers 1 #define ADC1_SC1B (*(volatile uint32_t *)0x400BB004) // ADC status and control registers 1 #define ADC1_CFG1 (*(volatile uint32_t *)0x400BB008) // ADC configuration register 1 #define ADC1_CFG2 (*(volatile uint32_t *)0x400BB00C) // Configuration register 2 #define ADC1_RA (*(volatile uint32_t *)0x400BB010) // ADC data result register #define ADC1_RB (*(volatile uint32_t *)0x400BB014) // ADC data result register #define ADC1_CV1 (*(volatile uint32_t *)0x400BB018) // Compare value registers #define ADC1_CV2 (*(volatile uint32_t *)0x400BB01C) // Compare value registers #define ADC1_SC2 (*(volatile uint32_t *)0x400BB020) // Status and control register 2 #define ADC1_SC3 (*(volatile uint32_t *)0x400BB024) // Status and control register 3 #define ADC1_OFS (*(volatile uint32_t *)0x400BB028) // ADC offset correction register #define ADC1_PG (*(volatile uint32_t *)0x400BB02C) // ADC plus-side gain register #define ADC1_MG (*(volatile uint32_t *)0x400BB030) // ADC minus-side gain register #define ADC1_CLPD (*(volatile uint32_t *)0x400BB034) // ADC plus-side general calibration value register #define ADC1_CLPS (*(volatile uint32_t *)0x400BB038) // ADC plus-side general calibration value register #define ADC1_CLP4 (*(volatile uint32_t *)0x400BB03C) // ADC plus-side general calibration value register #define ADC1_CLP3 (*(volatile uint32_t *)0x400BB040) // ADC plus-side general calibration value register #define ADC1_CLP2 (*(volatile uint32_t *)0x400BB044) // ADC plus-side general calibration value register #define ADC1_CLP1 (*(volatile uint32_t *)0x400BB048) // ADC plus-side general calibration value register #define ADC1_CLP0 (*(volatile uint32_t *)0x400BB04C) // ADC plus-side general calibration value register #define ADC1_PGA (*(volatile uint32_t *)0x400BB050) // ADC Programmable Gain Amplifier #define ADC1_CLMD (*(volatile uint32_t *)0x400BB054) // ADC minus-side general calibration value register #define ADC1_CLMS (*(volatile uint32_t *)0x400BB058) // ADC minus-side general calibration value register #define ADC1_CLM4 (*(volatile uint32_t *)0x400BB05C) // ADC minus-side general calibration value register #define ADC1_CLM3 (*(volatile uint32_t *)0x400BB060) // ADC minus-side general calibration value register #define ADC1_CLM2 (*(volatile uint32_t *)0x400BB064) // ADC minus-side general calibration value register #define ADC1_CLM1 (*(volatile uint32_t *)0x400BB068) // ADC minus-side general calibration value register #define ADC1_CLM0 (*(volatile uint32_t *)0x400BB06C) // ADC minus-side general calibration value register // 12-bit Digital-to-Analog Converter (DAC) #if defined(KINETISK) #define DAC0_DAT0L (*(volatile uint8_t *)0x400CC000) // DAC Data Low Register #define DAC0_DATH (*(volatile uint8_t *)0x400CC001) // DAC Data High Register #define DAC0_DAT1L (*(volatile uint8_t *)0x400CC002) // DAC Data Low Register #define DAC0_DAT2L (*(volatile uint8_t *)0x400CC004) // DAC Data Low Register #define DAC0_DAT3L (*(volatile uint8_t *)0x400CC006) // DAC Data Low Register #define DAC0_DAT4L (*(volatile uint8_t *)0x400CC008) // DAC Data Low Register #define DAC0_DAT5L (*(volatile uint8_t *)0x400CC00A) // DAC Data Low Register #define DAC0_DAT6L (*(volatile uint8_t *)0x400CC00C) // DAC Data Low Register #define DAC0_DAT7L (*(volatile uint8_t *)0x400CC00E) // DAC Data Low Register #define DAC0_DAT8L (*(volatile uint8_t *)0x400CC010) // DAC Data Low Register #define DAC0_DAT9L (*(volatile uint8_t *)0x400CC012) // DAC Data Low Register #define DAC0_DAT10L (*(volatile uint8_t *)0x400CC014) // DAC Data Low Register #define DAC0_DAT11L (*(volatile uint8_t *)0x400CC016) // DAC Data Low Register #define DAC0_DAT12L (*(volatile uint8_t *)0x400CC018) // DAC Data Low Register #define DAC0_DAT13L (*(volatile uint8_t *)0x400CC01A) // DAC Data Low Register #define DAC0_DAT14L (*(volatile uint8_t *)0x400CC01C) // DAC Data Low Register #define DAC0_DAT15L (*(volatile uint8_t *)0x400CC01E) // DAC Data Low Register #define DAC0_SR (*(volatile uint8_t *)0x400CC020) // DAC Status Register #define DAC0_C0 (*(volatile uint8_t *)0x400CC021) // DAC Control Register #define DAC_C0_DACEN 0x80 // DAC Enable #define DAC_C0_DACRFS 0x40 // DAC Reference Select #define DAC_C0_DACTRGSEL 0x20 // DAC Trigger Select #define DAC_C0_DACSWTRG 0x10 // DAC Software Trigger #define DAC_C0_LPEN 0x08 // DAC Low Power Control #define DAC_C0_DACBWIEN 0x04 // DAC Buffer Watermark Interrupt Enable #define DAC_C0_DACBTIEN 0x02 // DAC Buffer Read Pointer Top Flag Interrupt Enable #define DAC_C0_DACBBIEN 0x01 // DAC Buffer Read Pointer Bottom Flag Interrupt Enable #define DAC0_C1 (*(volatile uint8_t *)0x400CC022) // DAC Control Register 1 #define DAC_C1_DMAEN 0x80 // DMA Enable Select #define DAC_C1_DACBFWM(n) ((((n) & 3) << 3)) // DAC Buffer Watermark Select #define DAC_C1_DACBFMD(n) ((((n) & 3) << 1)) // DAC Buffer Work Mode Select #define DAC_C1_DACBFEN 0x01 // DAC Buffer Enable #define DAC0_C2 (*(volatile uint8_t *)0x400CC023) // DAC Control Register 2 #define DAC_C2_DACBFRP(n) ((((n) & 15) << 4)) // DAC Buffer Read Pointer #define DAC_C2_DACBFUP(n) ((((n) & 15) << 0)) // DAC Buffer Upper Limit #define DAC1_DAT0L (*(volatile uint8_t *)0x400CD000) // DAC Data Low Register #define DAC1_DATH (*(volatile uint8_t *)0x400CD001) // DAC Data High Register #define DAC1_DAT1L (*(volatile uint8_t *)0x400CD002) // DAC Data Low Register #define DAC1_DAT2L (*(volatile uint8_t *)0x400CD004) // DAC Data Low Register #define DAC1_DAT3L (*(volatile uint8_t *)0x400CD006) // DAC Data Low Register #define DAC1_DAT4L (*(volatile uint8_t *)0x400CD008) // DAC Data Low Register #define DAC1_DAT5L (*(volatile uint8_t *)0x400CD00A) // DAC Data Low Register #define DAC1_DAT6L (*(volatile uint8_t *)0x400CD00C) // DAC Data Low Register #define DAC1_DAT7L (*(volatile uint8_t *)0x400CD00E) // DAC Data Low Register #define DAC1_DAT8L (*(volatile uint8_t *)0x400CD010) // DAC Data Low Register #define DAC1_DAT9L (*(volatile uint8_t *)0x400CD012) // DAC Data Low Register #define DAC1_DAT10L (*(volatile uint8_t *)0x400CD014) // DAC Data Low Register #define DAC1_DAT11L (*(volatile uint8_t *)0x400CD016) // DAC Data Low Register #define DAC1_DAT12L (*(volatile uint8_t *)0x400CD018) // DAC Data Low Register #define DAC1_DAT13L (*(volatile uint8_t *)0x400CD01A) // DAC Data Low Register #define DAC1_DAT14L (*(volatile uint8_t *)0x400CD01C) // DAC Data Low Register #define DAC1_DAT15L (*(volatile uint8_t *)0x400CD01E) // DAC Data Low Register #define DAC1_SR (*(volatile uint8_t *)0x400CD020) // DAC Status Register #define DAC1_C0 (*(volatile uint8_t *)0x400CD021) // DAC Control Register #define DAC1_C1 (*(volatile uint8_t *)0x400CD022) // DAC Control Register 1 #define DAC1_C2 (*(volatile uint8_t *)0x400CD023) // DAC Control Register 2 #elif defined(KINETISL) #define DAC0_DAT0L (*(volatile uint8_t *)0x4003F000) // Data Low #define DAC0_DAT0H (*(volatile uint8_t *)0x4003F001) // Data High #define DAC0_DAT1L (*(volatile uint8_t *)0x4003F002) // Data Low #define DAC0_DAT1H (*(volatile uint8_t *)0x4003F003) // Data High #define DAC0_SR (*(volatile uint8_t *)0x4003F020) // Status #define DAC0_C0 (*(volatile uint8_t *)0x4003F021) // Control Register #define DAC0_C1 (*(volatile uint8_t *)0x4003F022) // Control Register 1 #define DAC0_C2 (*(volatile uint8_t *)0x4003F023) // Control Register 2 #define DAC_SR_DACBFRPTF ((uint8_t)0x02) // Read Pointer Top Position Flag #define DAC_SR_DACBFRPBF ((uint8_t)0x01) // Read Pointer Bottom Position Flag #define DAC_C0_DACEN ((uint8_t)0x80) // Enable #define DAC_C0_DACRFS ((uint8_t)0x40) // Reference, 0=AREF pin, 1=VCC #define DAC_C0_DACTRGSEL ((uint8_t)0x20) // Trigger Select #define DAC_C0_DACSWTRG ((uint8_t)0x10) // Software Trigger #define DAC_C0_LPEN ((uint8_t)0x08) // Low Power Control #define DAC_C0_DACBTIEN ((uint8_t)0x02) // Top Flag Interrupt Enable #define DAC_C0_DACBBIEN ((uint8_t)0x01) // Bottom Flag Interrupt Enable #define DAC_C1_DMAEN ((uint8_t)0x80) // DMA Enable #define DAC_C1_DACBFMD ((uint8_t)0x04) // Work Mode Select #define DAC_C1_DACBFEN ((uint8_t)0x01) // Buffer Enable #define DAC_C2_DACBFRP ((uint8_t)0x10) // Buffer Read Pointer #define DAC_C2_DACBFUP ((uint8_t)0x01) // Buffer Upper Limit #endif // Analog Comparator (CMP) #define CMP0_CR0 (*(volatile uint8_t *)0x40073000) // CMP Control Register 0 #define CMP_CR0_FILTER_CNT(n) (uint8_t)(((n) & 0x07) << 4) #define CMP_CR0_HYSTCTR(n) (uint8_t)(((n) & 0x03) << 0) #define CMP0_CR1 (*(volatile uint8_t *)0x40073001) // CMP Control Register #define CMP_CR1_SE (uint8_t)0x80 // Sample Enable #define CMP_CR1_WE (uint8_t)0x40 // Windowing Enable #define CMP_CR1_TRIGM (uint8_t)0x20 // Trigger Mode Enable #define CMP_CR1_PMODE (uint8_t)0x10 // Power Mode Select #define CMP_CR1_INV (uint8_t)0x08 // Comparator INVERT #define CMP_CR1_COS (uint8_t)0x04 // Comparator Output Select #define CMP_CR1_OPE (uint8_t)0x02 // Comparator Output Pin Enable #define CMP_CR1_EN (uint8_t)0x01 // Comparator Module Enable #define CMP0_FPR (*(volatile uint8_t *)0x40073002) // CMP Filter Period Register #define CMP0_SCR (*(volatile uint8_t *)0x40073003) // CMP Status and Control Register #define CMP_SCR_DMAEN (uint8_t)0x40 // DMA Enable Control #define CMP_SCR_IER (uint8_t)0x10 // Comparator Interrupt Enable Rising #define CMP_SCR_IEF (uint8_t)0x08 // Comparator Interrupt Enable Falling #define CMP_SCR_CFR (uint8_t)0x04 // Analog Comparator Flag Rising #define CMP_SCR_CFF (uint8_t)0x02 // Analog Comparator Flag Falling #define CMP_SCR_COUT (uint8_t)0x01 // Analog Comparator Output #define CMP0_DACCR (*(volatile uint8_t *)0x40073004) // DAC Control Register #define CMP_DACCR_DACEN (uint8_t)0x80 // DAC Enable #define CMP_DACCR_VRSEL (uint8_t)0x40 // Supply Voltage Reference Source Select #define CMP_DACCR_VOSEL(n) (uint8_t)(((n) & 0x3F) << 0) // DAC Output Voltage Select #define CMP0_MUXCR (*(volatile uint8_t *)0x40073005) // MUX Control Register #define CMP_MUXCR_PSTM (uint8_t)0x40 // Pass Through Mode Enable #define CMP_MUXCR_PSEL(n) (uint8_t)(((n) & 0x07) << 3) // Plus Input Mux Control #define CMP_MUXCR_MSEL(n) (uint8_t)(((n) & 0x07) << 0) // Minus Input Mux Control #define CMP1_CR0 (*(volatile uint8_t *)0x40073008) // CMP Control Register 0 #define CMP1_CR1 (*(volatile uint8_t *)0x40073009) // CMP Control Register 1 #define CMP1_FPR (*(volatile uint8_t *)0x4007300A) // CMP Filter Period Register #define CMP1_SCR (*(volatile uint8_t *)0x4007300B) // CMP Status and Control Register #define CMP1_DACCR (*(volatile uint8_t *)0x4007300C) // DAC Control Register #define CMP1_MUXCR (*(volatile uint8_t *)0x4007300D) // MUX Control Register #define CMP2_CR0 (*(volatile uint8_t *)0x40073010) // CMP Control Register 0 #define CMP2_CR1 (*(volatile uint8_t *)0x40073011) // CMP Control Register 1 #define CMP2_FPR (*(volatile uint8_t *)0x40073012) // CMP Filter Period Register #define CMP2_SCR (*(volatile uint8_t *)0x40073013) // CMP Status and Control Register #define CMP2_DACCR (*(volatile uint8_t *)0x40073014) // DAC Control Register #define CMP2_MUXCR (*(volatile uint8_t *)0x40073015) // MUX Control Register #define CMP3_CR0 (*(volatile uint8_t *)0x40073018) // CMP Control Register 0 #define CMP3_CR1 (*(volatile uint8_t *)0x40073019) // CMP Control Register 1 #define CMP3_FPR (*(volatile uint8_t *)0x4007301A) // CMP Filter Period Register #define CMP3_SCR (*(volatile uint8_t *)0x4007301B) // CMP Status and Control Register #define CMP3_DACCR (*(volatile uint8_t *)0x4007301C) // DAC Control Register #define CMP3_MUXCR (*(volatile uint8_t *)0x4007301D) // MUX Control Register // Analog Voltage Reference (VREFV1) #define VREF_TRM (*(volatile uint8_t *)0x40074000) // VREF Trim Register #define VREF_TRM_CHOPEN ((uint8_t)0x40) // Chop oscillator enable #define VREF_TRM_TRIM(n) ((n) & 0x3F) // Trim bits #define VREF_SC (*(volatile uint8_t *)0x40074001) // VREF Status and Control Register #define VREF_SC_VREFEN ((uint8_t)0x80) // Internal Voltage Reference enable #define VREF_SC_REGEN ((uint8_t)0x40) // Regulator enable #define VREF_SC_ICOMPEN ((uint8_t)0x20) // Second order curvature compensation enable #define VREF_SC_VREFST ((uint8_t)0x04) // Internal Voltage Reference stable flag #define VREF_SC_MODE_LV(n) (uint8_t)(((n) & 3) << 0) // Buffer Mode selection: 0=Bandgap on only // 2=Low-power buffer mode // Programmable Delay Block (PDB) #define PDB0_SC (*(volatile uint32_t *)0x40036000) // Status and Control Register #define PDB_SC_LDMOD(n) (((n) & 3) << 18) // Load Mode Select #define PDB_SC_PDBEIE 0x00020000 // Sequence Error Interrupt Enable #define PDB_SC_SWTRIG 0x00010000 // Software Trigger #define PDB_SC_DMAEN 0x00008000 // DMA Enable #define PDB_SC_PRESCALER(n) (((n) & 7) << 12) // Prescaler Divider Select #define PDB_SC_TRGSEL(n) (((n) & 15) << 8) // Trigger Input Source Select #define PDB_SC_PDBEN 0x00000080 // PDB Enable #define PDB_SC_PDBIF 0x00000040 // PDB Interrupt Flag #define PDB_SC_PDBIE 0x00000020 // PDB Interrupt Enable. #define PDB_SC_MULT(n) (((n) & 3) << 2) // Multiplication Factor #define PDB_SC_CONT 0x00000002 // Continuous Mode Enable #define PDB_SC_LDOK 0x00000001 // Load OK #define PDB0_MOD (*(volatile uint32_t *)0x40036004) // Modulus Register #define PDB0_CNT (*(volatile uint32_t *)0x40036008) // Counter Register #define PDB0_IDLY (*(volatile uint32_t *)0x4003600C) // Interrupt Delay Register #define PDB0_CH0C1 (*(volatile uint32_t *)0x40036010) // Channel 0 Control Register 1 #define PDB0_CH0S (*(volatile uint32_t *)0x40036014) // Channel 0 Status Register #define PDB0_CH0DLY0 (*(volatile uint32_t *)0x40036018) // Channel 0 Delay 0 Register #define PDB0_CH0DLY1 (*(volatile uint32_t *)0x4003601C) // Channel 0 Delay 1 Register #define PDB0_CH1C1 (*(volatile uint32_t *)0x40036038) // Channel 1 Control Register 1 #define PDB0_CH1S (*(volatile uint32_t *)0x4003603C) // Channel 1 Status Register #define PDB0_CH1DLY0 (*(volatile uint32_t *)0x40036040) // Channel 1 Delay 0 Register #define PDB0_CH1DLY1 (*(volatile uint32_t *)0x40036044) // Channel 1 Delay 1 Register #define PDB0_DACINTC0 (*(volatile uint32_t *)0x40036150) // DAC Interval Trigger n Control Register #define PDB0_DACINT0 (*(volatile uint32_t *)0x40036154) // DAC Interval n Register #define PDB0_DACINTC1 (*(volatile uint32_t *)0x40036158) // DAC Interval Trigger n Control register #define PDB0_DACINT1 (*(volatile uint32_t *)0x4003615C) // DAC Interval n register #define PDB0_POEN (*(volatile uint32_t *)0x40036190) // Pulse-Out n Enable Register #define PDB0_PO0DLY (*(volatile uint32_t *)0x40036194) // Pulse-Out n Delay Register #define PDB0_PO1DLY (*(volatile uint32_t *)0x40036198) // Pulse-Out n Delay Register #define PDB0_PO2DLY (*(volatile uint32_t *)0x4003619C) // Pulse-Out n Delay Register #define PDB0_PO3DLY (*(volatile uint32_t *)0x400361A0) // Pulse-Out n Delay Register // Timer/PWM Module (TPM) #if defined(KINETISL) #define TPM0_SC (*(volatile uint32_t *)0x40038000) // Status And Control #define TPM0_CNT (*(volatile uint32_t *)0x40038004) // Counter #define TPM0_MOD (*(volatile uint32_t *)0x40038008) // Modulo #define TPM0_C0SC (*(volatile uint32_t *)0x4003800C) // Channel 0 Status And Control #define TPM0_C0V (*(volatile uint32_t *)0x40038010) // Channel 0 Value #define TPM0_C1SC (*(volatile uint32_t *)0x40038014) // Channel 1 Status And Control #define TPM0_C1V (*(volatile uint32_t *)0x40038018) // Channel 1 Value #define TPM0_C2SC (*(volatile uint32_t *)0x4003801C) // Channel 2 Status And Control #define TPM0_C2V (*(volatile uint32_t *)0x40038020) // Channel 2 Value #define TPM0_C3SC (*(volatile uint32_t *)0x40038024) // Channel 3 Status And Control #define TPM0_C3V (*(volatile uint32_t *)0x40038028) // Channel 3 Value #define TPM0_C4SC (*(volatile uint32_t *)0x4003802C) // Channel 4 Status And Control #define TPM0_C4V (*(volatile uint32_t *)0x40038030) // Channel 4 Value #define TPM0_C5SC (*(volatile uint32_t *)0x40038034) // Channel 5 Status And Control #define TPM0_C5V (*(volatile uint32_t *)0x40038038) // Channel 5 Value #define TPM0_STATUS (*(volatile uint32_t *)0x40038050) // Capture And Compare Status #define TPM0_CONF (*(volatile uint32_t *)0x40038084) // Configuration #define TPM1_SC (*(volatile uint32_t *)0x40039000) // Status And Control #define TPM1_CNT (*(volatile uint32_t *)0x40039004) // Counter #define TPM1_MOD (*(volatile uint32_t *)0x40039008) // Modulo #define TPM1_C0SC (*(volatile uint32_t *)0x4003900C) // Channel 0 Status And Control #define TPM1_C0V (*(volatile uint32_t *)0x40039010) // Channel 0 Value #define TPM1_C1SC (*(volatile uint32_t *)0x40039014) // Channel 1 Status And Control #define TPM1_C1V (*(volatile uint32_t *)0x40039018) // Channel 1 Value #define TPM1_STATUS (*(volatile uint32_t *)0x40039050) // Capture And Compare Status #define TPM1_CONF (*(volatile uint32_t *)0x40039084) // Configuration #define TPM2_SC (*(volatile uint32_t *)0x4003A000) // Status And Control #define TPM2_CNT (*(volatile uint32_t *)0x4003A004) // Counter #define TPM2_MOD (*(volatile uint32_t *)0x4003A008) // Modulo #define TPM2_C0SC (*(volatile uint32_t *)0x4003A00C) // Channel 0 Status And Control #define TPM2_C0V (*(volatile uint32_t *)0x4003A010) // Channel 0 Value #define TPM2_C1SC (*(volatile uint32_t *)0x4003A014) // Channel 1 Status And Control #define TPM2_C1V (*(volatile uint32_t *)0x4003A018) // Channel 1 Value #define TPM2_STATUS (*(volatile uint32_t *)0x4003A050) // Capture And Compare Status #define TPM2_CONF (*(volatile uint32_t *)0x4003A084) // Configuration #elif defined(KINETISK) #define TPM1_SC (*(volatile uint32_t *)0x400C9000) // Status And Control #define TPM1_CNT (*(volatile uint32_t *)0x400C9004) // Counter #define TPM1_MOD (*(volatile uint32_t *)0x400C9008) // Modulo #define TPM1_C0SC (*(volatile uint32_t *)0x400C900C) // Channel 0 Status And Control #define TPM1_C0V (*(volatile uint32_t *)0x400C9010) // Channel 0 Value #define TPM1_C1SC (*(volatile uint32_t *)0x400C9014) // Channel 1 Status And Control #define TPM1_C1V (*(volatile uint32_t *)0x400C9018) // Channel 1 Value #define TPM1_STATUS (*(volatile uint32_t *)0x400C9050) // Capture And Compare Status #define TPM1_COMBINE (*(volatile uint32_t *)0x400C9064) // Function For Linked Channels #define TPM1_POL (*(volatile uint32_t *)0x400C9070) // Channels Polarity #define TPM1_FILTER (*(volatile uint32_t *)0x400C9078) // Input Capture Filter Control #define TPM1_QDCTRL (*(volatile uint32_t *)0x400C9080) // Quadrature Decoder Control And Status #define TPM1_CONF (*(volatile uint32_t *)0x400C9084) // Configuration #define TPM2_SC (*(volatile uint32_t *)0x400CA000) // Status And Control #define TPM2_CNT (*(volatile uint32_t *)0x400CA004) // Counter #define TPM2_MOD (*(volatile uint32_t *)0x400CA008) // Modulo #define TPM2_C0SC (*(volatile uint32_t *)0x400CA00C) // Channel 0 Status And Control #define TPM2_C0V (*(volatile uint32_t *)0x400CA010) // Channel 0 Value #define TPM2_C1SC (*(volatile uint32_t *)0x400CA014) // Channel 1 Status And Control #define TPM2_C1V (*(volatile uint32_t *)0x400CA018) // Channel 1 Value #define TPM2_STATUS (*(volatile uint32_t *)0x400CA050) // Capture And Compare Status #define TPM2_COMBINE (*(volatile uint32_t *)0x400CA064) // Function For Linked Channels #define TPM2_POL (*(volatile uint32_t *)0x400CA070) // Channels Polarity #define TPM2_FILTER (*(volatile uint32_t *)0x400CA078) // Input Capture Filter Control #define TPM2_QDCTRL (*(volatile uint32_t *)0x400CA080) // Quadrature Decoder Control And Status #define TPM2_CONF (*(volatile uint32_t *)0x400CA084) // Configuration #endif // FlexTimer Module (FTM) #define FTM0_SC (*(volatile uint32_t *)0x40038000) // Status And Control #ifdef KINETISL #define FTM_SC_DMA 0x100 // DMA Enable #endif #define FTM_SC_TOF 0x80 // Timer Overflow Flag #define FTM_SC_TOIE 0x40 // Timer Overflow Interrupt Enable #define FTM_SC_CPWMS 0x20 // Center-Aligned PWM Select #define FTM_SC_CLKS(n) (((n) & 3) << 3) // Clock Source Selection #define FTM_SC_CLKS_MASK 0x18 #define FTM_SC_PS(n) (((n) & 7) << 0) // Prescale Factor Selection #define FTM_SC_PS_MASK 0x07 #define FTM0_CNT (*(volatile uint32_t *)0x40038004) // Counter #define FTM0_MOD (*(volatile uint32_t *)0x40038008) // Modulo #define FTM0_C0SC (*(volatile uint32_t *)0x4003800C) // Channel 0 Status And Control #define FTM_CSC_CHF 0x80 // Channel Flag #define FTM_CSC_CHIE 0x40 // Channel Interrupt Enable #define FTM_CSC_MSB 0x20 // Channel Mode Select #define FTM_CSC_MSA 0x10 // Channel Mode Select #define FTM_CSC_ELSB 0x08 // Edge or Level Select #define FTM_CSC_ELSA 0x04 // Edge or Level Select #define FTM_CSC_DMA 0x01 // DMA Enable #define FTM0_C0V (*(volatile uint32_t *)0x40038010) // Channel 0 Value #define FTM0_C1SC (*(volatile uint32_t *)0x40038014) // Channel 1 Status And Control #define FTM0_C1V (*(volatile uint32_t *)0x40038018) // Channel 1 Value #define FTM0_C2SC (*(volatile uint32_t *)0x4003801C) // Channel 2 Status And Control #define FTM0_C2V (*(volatile uint32_t *)0x40038020) // Channel 2 Value #define FTM0_C3SC (*(volatile uint32_t *)0x40038024) // Channel 3 Status And Control #define FTM0_C3V (*(volatile uint32_t *)0x40038028) // Channel 3 Value #define FTM0_C4SC (*(volatile uint32_t *)0x4003802C) // Channel 4 Status And Control #define FTM0_C4V (*(volatile uint32_t *)0x40038030) // Channel 4 Value #define FTM0_C5SC (*(volatile uint32_t *)0x40038034) // Channel 5 Status And Control #define FTM0_C5V (*(volatile uint32_t *)0x40038038) // Channel 5 Value #define FTM0_C6SC (*(volatile uint32_t *)0x4003803C) // Channel 6 Status And Control #define FTM0_C6V (*(volatile uint32_t *)0x40038040) // Channel 6 Value #define FTM0_C7SC (*(volatile uint32_t *)0x40038044) // Channel 7 Status And Control #define FTM0_C7V (*(volatile uint32_t *)0x40038048) // Channel 7 Value #define FTM0_CNTIN (*(volatile uint32_t *)0x4003804C) // Counter Initial Value #define FTM0_STATUS (*(volatile uint32_t *)0x40038050) // Capture And Compare Status #define FTM_STATUS_CH7F 0x80 // #define FTM_STATUS_CH6F 0x40 // #define FTM_STATUS_CH5F 0x20 // #define FTM_STATUS_CH4F 0x10 // #define FTM_STATUS_CH3F 0x08 // #define FTM_STATUS_CH2F 0x04 // #define FTM_STATUS_CH1F 0x02 // #define FTM_STATUS_CH0F 0x01 // #define FTM0_MODE (*(volatile uint32_t *)0x40038054) // Features Mode Selection #define FTM_MODE_FAULTIE 0x80 // Fault Interrupt Enable #define FTM_MODE_FAULTM(n) (((n) & 3) << 5) // Fault Control Mode #define FTM_MODE_FAULTM_MASK 0x60 #define FTM_MODE_CAPTEST 0x10 // Capture Test Mode Enable #define FTM_MODE_PWMSYNC 0x08 // PWM Synchronization Mode #define FTM_MODE_WPDIS 0x04 // Write Protection Disable #define FTM_MODE_INIT 0x02 // Initialize The Channels Output #define FTM_MODE_FTMEN 0x01 // FTM Enable #define FTM0_SYNC (*(volatile uint32_t *)0x40038058) // Synchronization #define FTM_SYNC_SWSYNC 0x80 // #define FTM_SYNC_TRIG2 0x40 // #define FTM_SYNC_TRIG1 0x20 // #define FTM_SYNC_TRIG0 0x10 // #define FTM_SYNC_SYNCHOM 0x08 // #define FTM_SYNC_REINIT 0x04 // #define FTM_SYNC_CNTMAX 0x02 // #define FTM_SYNC_CNTMIN 0x01 // #define FTM0_OUTINIT (*(volatile uint32_t *)0x4003805C) // Initial State For Channels Output #define FTM_OUTINIT_CH7OI 0x80 // #define FTM_OUTINIT_CH6OI 0x40 // #define FTM_OUTINIT_CH5OI 0x20 // #define FTM_OUTINIT_CH4OI 0x10 // #define FTM_OUTINIT_CH3OI 0x08 // #define FTM_OUTINIT_CH2OI 0x04 // #define FTM_OUTINIT_CH1OI 0x02 // #define FTM_OUTINIT_CH0OI 0x01 // #define FTM0_OUTMASK (*(volatile uint32_t *)0x40038060) // Output Mask #define FTM_OUTMASK_CH7OM 0x80 // #define FTM_OUTMASK_CH6OM 0x40 // #define FTM_OUTMASK_CH5OM 0x20 // #define FTM_OUTMASK_CH4OM 0x10 // #define FTM_OUTMASK_CH3OM 0x08 // #define FTM_OUTMASK_CH2OM 0x04 // #define FTM_OUTMASK_CH1OM 0x02 // #define FTM_OUTMASK_CH0OM 0x01 // #define FTM0_COMBINE (*(volatile uint32_t *)0x40038064) // Function For Linked Channels #define FTM_COMBINE_FAULTEN3 0x40000000 // Enable the fault control, ch #6 & #7 #define FTM_COMBINE_SYNCEN3 0x20000000 // Enable PWM sync of C6V & C7V #define FTM_COMBINE_DTEN3 0x10000000 // Enable deadtime insertion, ch #6 & #7 #define FTM_COMBINE_DECAP3 0x08000000 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN3 0x04000000 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP3 0x02000000 // Complement Of Channel #6 & #7 #define FTM_COMBINE_COMBINE3 0x01000000 // Combine Channels #6 & #7 #define FTM_COMBINE_FAULTEN2 0x00400000 // Enable the fault control, ch #4 & #5 #define FTM_COMBINE_SYNCEN2 0x00200000 // Enable PWM sync of C4V & C5V #define FTM_COMBINE_DTEN2 0x00100000 // Enable deadtime insertion, ch #4 & #5 #define FTM_COMBINE_DECAP2 0x00080000 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN2 0x00040000 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP2 0x00020000 // Complement Of Channel #4 & #5 #define FTM_COMBINE_COMBINE2 0x00010000 // Combine Channels #4 & #5 #define FTM_COMBINE_FAULTEN1 0x00004000 // Enable the fault control, ch #2 & #3 #define FTM_COMBINE_SYNCEN1 0x00002000 // Enable PWM sync of C2V & C3V #define FTM_COMBINE_DTEN1 0x00001000 // Enable deadtime insertion, ch #2 & #3 #define FTM_COMBINE_DECAP1 0x00000800 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN1 0x00000400 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP1 0x00000200 // Complement Of Channel #2 & #3 #define FTM_COMBINE_COMBINE1 0x00000100 // Combine Channels #2 & #3 #define FTM_COMBINE_FAULTEN0 0x00000040 // Enable the fault control, ch #0 & #1 #define FTM_COMBINE_SYNCEN0 0x00000020 // Enable PWM sync of C0V & C1V #define FTM_COMBINE_DTEN0 0x00000010 // Enable deadtime insertion, ch #0 & #1 #define FTM_COMBINE_DECAP0 0x00000008 // Dual Edge Capture Mode #define FTM_COMBINE_DECAPEN0 0x00000004 // Dual Edge Capture Mode Enable #define FTM_COMBINE_COMP0 0x00000002 // Complement Of Channel #0 & #1 #define FTM_COMBINE_COMBINE0 0x00000001 // Combine Channels #0 & #1 #define FTM0_DEADTIME (*(volatile uint32_t *)0x40038068) // Deadtime Insertion Control #define FTM_DEADTIME_DTPS(n) (((n) & 3) << 6) // Prescaler Value, 0=1x, 2=4x, 3=16x #define FTM_DEADTIME_DTPS_MASK 0xC0 #define FTM_DEADTIME_DTVAL(n) (((n) & 63) << 0) // Deadtime Value #define FTM_DEADTIME_DTVAL_MASK 0x3F #define FTM0_EXTTRIG (*(volatile uint32_t *)0x4003806C) // FTM External Trigger #define FTM_EXTTRIG_TRIGF 0x80 // Channel Trigger Flag #define FTM_EXTTRIG_INITTRIGEN 0x40 // Initialization Trigger Enable #define FTM_EXTTRIG_CH1TRIG 0x20 // Channel 1 Trigger Enable #define FTM_EXTTRIG_CH0TRIG 0x10 // Channel 0 Trigger Enable #define FTM_EXTTRIG_CH5TRIG 0x08 // Channel 5 Trigger Enable #define FTM_EXTTRIG_CH4TRIG 0x04 // Channel 4 Trigger Enable #define FTM_EXTTRIG_CH3TRIG 0x02 // Channel 3 Trigger Enable #define FTM_EXTTRIG_CH2TRIG 0x01 // Channel 2 Trigger Enable #define FTM0_POL (*(volatile uint32_t *)0x40038070) // Channels Polarity #define FTM_POL_POL7 0x80 // Channel 7 Polarity, 0=active high, 1=active low #define FTM_POL_POL6 0x40 // Channel 6 Polarity, 0=active high, 1=active low #define FTM_POL_POL5 0x20 // Channel 5 Polarity, 0=active high, 1=active low #define FTM_POL_POL4 0x10 // Channel 4 Polarity, 0=active high, 1=active low #define FTM_POL_POL3 0x08 // Channel 3 Polarity, 0=active high, 1=active low #define FTM_POL_POL2 0x04 // Channel 2 Polarity, 0=active high, 1=active low #define FTM_POL_POL1 0x02 // Channel 1 Polarity, 0=active high, 1=active low #define FTM_POL_POL0 0x01 // Channel 0 Polarity, 0=active high, 1=active low #define FTM0_FMS (*(volatile uint32_t *)0x40038074) // Fault Mode Status #define FTM_FMS_FAULTF 0x80 // Fault Detection Flag #define FTM_FMS_WPEN 0x40 // Write Protection Enable #define FTM_FMS_FAULTIN 0x20 // Fault Inputs #define FTM_FMS_FAULTF3 0x08 // Fault Detection Flag 3 #define FTM_FMS_FAULTF2 0x04 // Fault Detection Flag 2 #define FTM_FMS_FAULTF1 0x02 // Fault Detection Flag 1 #define FTM_FMS_FAULTF0 0x01 // Fault Detection Flag 0 #define FTM0_FILTER (*(volatile uint32_t *)0x40038078) // Input Capture Filter Control #define FTM_FILTER_CH3FVAL(n) (((n) & 15) << 12) // Channel 3 Input Filter #define FTM_FILTER_CH2FVAL(n) (((n) & 15) << 8) // Channel 2 Input Filter #define FTM_FILTER_CH1FVAL(n) (((n) & 15) << 4) // Channel 1 Input Filter #define FTM_FILTER_CH0FVAL(n) (((n) & 15) << 0) // Channel 0 Input Filter #define FTM_FILTER_CH3FVAL_MASK 0xF000 #define FTM_FILTER_CH2FVAL_MASK 0x0F00 #define FTM_FILTER_CH1FVAL_MASK 0x00F0 #define FTM_FILTER_CH0FVAL_MASK 0x000F #define FTM0_FLTCTRL (*(volatile uint32_t *)0x4003807C) // Fault Control #define FTM_FLTCTRL_FFVAL(n) (((n) & 15) << 8) // Fault Input Filter Value, 0=disable #define FTM_FLTCTRL_FFVAL_MASK 0xF00 #define FTM_FLTCTRL_FFLTR3EN 0x80 // Fault Input 3 Filter Enable #define FTM_FLTCTRL_FFLTR2EN 0x40 // Fault Input 2 Filter Enable #define FTM_FLTCTRL_FFLTR1EN 0x20 // Fault Input 1 Filter Enable #define FTM_FLTCTRL_FFLTR0EN 0x10 // Fault Input 0 Filter Enable #define FTM_FLTCTRL_FAULT3EN 0x08 // Fault Input 3 Enable #define FTM_FLTCTRL_FAULT2EN 0x04 // Fault Input 2 Enable #define FTM_FLTCTRL_FAULT1EN 0x02 // Fault Input 1 Enable #define FTM_FLTCTRL_FAULT0EN 0x01 // Fault Input 0 Enable #define FTM0_QDCTRL (*(volatile uint32_t *)0x40038080) // Quadrature Decoder Control And Status #define FTM_QDCTRL_PHAFLTREN 0x80 // Phase A Input Filter Enable #define FTM_QDCTRL_PHBFLTREN 0x40 // Phase B Input Filter Enable #define FTM_QDCTRL_PHAPOL 0x20 // Phase A Input Polarity #define FTM_QDCTRL_PHBPOL 0x10 // Phase B Input Polarity #define FTM_QDCTRL_QUADMODE 0x08 // Quadrature Decoder Mode #define FTM_QDCTRL_QUADIR 0x04 // FTM Counter Direction In Quadrature Decoder Mode #define FTM_QDCTRL_TOFDIR 0x02 // Timer Overflow Direction In Quadrature Decoder Mode #define FTM_QDCTRL_QUADEN 0x01 // Quadrature Decoder Mode Enable #define FTM0_CONF (*(volatile uint32_t *)0x40038084) // Configuration #define FTM_CONF_GTBEOUT 0x400 // Global Time Base Output #define FTM_CONF_GTBEEN 0x200 // Global Time Base Enable #define FTM_CONF_BDMMODE (((n) & 3) << 6) // Behavior when in debug mode #define FTM_CONF_NUMTOF (((n) & 31) << 0) // ratio of counter overflows to TOF bit set #define FTM0_FLTPOL (*(volatile uint32_t *)0x40038088) // FTM Fault Input Polarity #define FTM_FLTPOL_FLT3POL 0x08 // Fault Input 3 Polarity #define FTM_FLTPOL_FLT2POL 0x04 // Fault Input 2 Polarity #define FTM_FLTPOL_FLT1POL 0x02 // Fault Input 1 Polarity #define FTM_FLTPOL_FLT0POL 0x01 // Fault Input 0 Polarity #define FTM0_SYNCONF (*(volatile uint32_t *)0x4003808C) // Synchronization Configuration #define FTM_SYNCONF_HWSOC 0x100000 // Software output control synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWINVC 0x080000 // Inverting control synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWOM 0x040000 // Output mask synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWWRBUF 0x020000 // MOD, CNTIN, and CV registers synchronization is activated by a hardware trigger. #define FTM_SYNCONF_HWRSTCNT 0x010000 // FTM counter synchronization is activated by a hardware trigger. #define FTM_SYNCONF_SWSOC 0x001000 // Software output control synchronization is activated by the software trigger. #define FTM_SYNCONF_SWINVC 0x000800 // Inverting control synchronization is activated by the software trigger. #define FTM_SYNCONF_SWOM 0x000400 // Output mask synchronization is activated by the software trigger. #define FTM_SYNCONF_SWWRBUF 0x000200 // MOD, CNTIN, and CV registers synchronization is activated by the software trigger. #define FTM_SYNCONF_SWRSTCNT 0x000100 // FTM counter synchronization is activated by the software trigger. #define FTM_SYNCONF_SYNCMODE 0x000080 // Synchronization Mode, 0=Legacy, 1=Enhanced PWM #define FTM_SYNCONF_SWOC 0x000020 // SWOCTRL Register Synchronization #define FTM_SYNCONF_INVC 0x000010 // INVCTRL Register Synchronization #define FTM_SYNCONF_CNTINC 0x000004 // CNTIN Register Synchronization #define FTM_SYNCONF_HWTRIGMODE 0x000001 // Hardware Trigger Mode #define FTM0_INVCTRL (*(volatile uint32_t *)0x40038090) // FTM Inverting Control #define FTM_INVCTRL_INV3EN 0x08 // Pair Channels 3 Inverting Enable #define FTM_INVCTRL_INV2EN 0x04 // Pair Channels 2 Inverting Enable #define FTM_INVCTRL_INV1EN 0x02 // Pair Channels 1 Inverting Enable #define FTM_INVCTRL_INV0EN 0x01 // Pair Channels 0 Inverting Enable #define FTM0_SWOCTRL (*(volatile uint32_t *)0x40038094) // FTM Software Output Control #define FTM_SWOCTRL_CH7OCV 0x8000 // Channel 7 Software Output Control Value #define FTM_SWOCTRL_CH6OCV 0x4000 // Channel 6 Software Output Control Value #define FTM_SWOCTRL_CH5OCV 0x2000 // Channel 5 Software Output Control Value #define FTM_SWOCTRL_CH4OCV 0x1000 // Channel 4 Software Output Control Value #define FTM_SWOCTRL_CH3OCV 0x0800 // Channel 3 Software Output Control Value #define FTM_SWOCTRL_CH2OCV 0x0400 // Channel 2 Software Output Control Value #define FTM_SWOCTRL_CH1OCV 0x0200 // Channel 1 Software Output Control Value #define FTM_SWOCTRL_CH0OCV 0x0100 // Channel 0 Software Output Control Value #define FTM_SWOCTRL_CH7OC 0x0080 // Channel 7 Software Output Control Enable #define FTM_SWOCTRL_CH6OC 0x0040 // Channel 6 Software Output Control Enable #define FTM_SWOCTRL_CH5OC 0x0020 // Channel 5 Software Output Control Enable #define FTM_SWOCTRL_CH4OC 0x0010 // Channel 4 Software Output Control Enable #define FTM_SWOCTRL_CH3OC 0x0008 // Channel 3 Software Output Control Enable #define FTM_SWOCTRL_CH2OC 0x0004 // Channel 2 Software Output Control Enable #define FTM_SWOCTRL_CH1OC 0x0002 // Channel 1 Software Output Control Enable #define FTM_SWOCTRL_CH0OC 0x0001 // Channel 0 Software Output Control Enable #define FTM0_PWMLOAD (*(volatile uint32_t *)0x40038098) // FTM PWM Load #define FTM_PWMLOAD_LDOK 0x200 // Enables the loading of the MOD, CNTIN, and CV registers with the values of their write buffers #define FTM_PWMLOAD_CH7SEL 0x80 // Channel 7 Select #define FTM_PWMLOAD_CH6SEL 0x40 // Channel 6 Select #define FTM_PWMLOAD_CH5SEL 0x20 // Channel 5 Select #define FTM_PWMLOAD_CH4SEL 0x10 // Channel 4 Select #define FTM_PWMLOAD_CH3SEL 0x08 // Channel 4 Select #define FTM_PWMLOAD_CH2SEL 0x04 // Channel 3 Select #define FTM_PWMLOAD_CH1SEL 0x02 // Channel 2 Select #define FTM_PWMLOAD_CH0SEL 0x01 // Channel 1 Select #define FTM1_SC (*(volatile uint32_t *)0x40039000) // Status And Control #define FTM1_CNT (*(volatile uint32_t *)0x40039004) // Counter #define FTM1_MOD (*(volatile uint32_t *)0x40039008) // Modulo #define FTM1_C0SC (*(volatile uint32_t *)0x4003900C) // Channel 0 Status And Control #define FTM1_C0V (*(volatile uint32_t *)0x40039010) // Channel 0 Value #define FTM1_C1SC (*(volatile uint32_t *)0x40039014) // Channel 1 Status And Control #define FTM1_C1V (*(volatile uint32_t *)0x40039018) // Channel 1 Value #define FTM1_CNTIN (*(volatile uint32_t *)0x4003904C) // Counter Initial Value #define FTM1_STATUS (*(volatile uint32_t *)0x40039050) // Capture And Compare Status #define FTM1_MODE (*(volatile uint32_t *)0x40039054) // Features Mode Selection #define FTM1_SYNC (*(volatile uint32_t *)0x40039058) // Synchronization #define FTM1_OUTINIT (*(volatile uint32_t *)0x4003905C) // Initial State For Channels Output #define FTM1_OUTMASK (*(volatile uint32_t *)0x40039060) // Output Mask #define FTM1_COMBINE (*(volatile uint32_t *)0x40039064) // Function For Linked Channels #define FTM1_DEADTIME (*(volatile uint32_t *)0x40039068) // Deadtime Insertion Control #define FTM1_EXTTRIG (*(volatile uint32_t *)0x4003906C) // FTM External Trigger #define FTM1_POL (*(volatile uint32_t *)0x40039070) // Channels Polarity #define FTM1_FMS (*(volatile uint32_t *)0x40039074) // Fault Mode Status #define FTM1_FILTER (*(volatile uint32_t *)0x40039078) // Input Capture Filter Control #define FTM1_FLTCTRL (*(volatile uint32_t *)0x4003907C) // Fault Control #define FTM1_QDCTRL (*(volatile uint32_t *)0x40039080) // Quadrature Decoder Control And Status #define FTM1_CONF (*(volatile uint32_t *)0x40039084) // Configuration #define FTM1_FLTPOL (*(volatile uint32_t *)0x40039088) // FTM Fault Input Polarity #define FTM1_SYNCONF (*(volatile uint32_t *)0x4003908C) // Synchronization Configuration #define FTM1_INVCTRL (*(volatile uint32_t *)0x40039090) // FTM Inverting Control #define FTM1_SWOCTRL (*(volatile uint32_t *)0x40039094) // FTM Software Output Control #define FTM1_PWMLOAD (*(volatile uint32_t *)0x40039098) // FTM PWM Load #if defined(KINETISK) #define FTM2_SC (*(volatile uint32_t *)0x400B8000) // Status And Control #define FTM2_CNT (*(volatile uint32_t *)0x400B8004) // Counter #define FTM2_MOD (*(volatile uint32_t *)0x400B8008) // Modulo #define FTM2_C0SC (*(volatile uint32_t *)0x400B800C) // Channel 0 Status And Control #define FTM2_C0V (*(volatile uint32_t *)0x400B8010) // Channel 0 Value #define FTM2_C1SC (*(volatile uint32_t *)0x400B8014) // Channel 1 Status And Control #define FTM2_C1V (*(volatile uint32_t *)0x400B8018) // Channel 1 Value #define FTM2_CNTIN (*(volatile uint32_t *)0x400B804C) // Counter Initial Value #define FTM2_STATUS (*(volatile uint32_t *)0x400B8050) // Capture And Compare Status #define FTM2_MODE (*(volatile uint32_t *)0x400B8054) // Features Mode Selection #define FTM2_SYNC (*(volatile uint32_t *)0x400B8058) // Synchronization #define FTM2_OUTINIT (*(volatile uint32_t *)0x400B805C) // Initial State For Channels Output #define FTM2_OUTMASK (*(volatile uint32_t *)0x400B8060) // Output Mask #define FTM2_COMBINE (*(volatile uint32_t *)0x400B8064) // Function For Linked Channels #define FTM2_DEADTIME (*(volatile uint32_t *)0x400B8068) // Deadtime Insertion Control #define FTM2_EXTTRIG (*(volatile uint32_t *)0x400B806C) // FTM External Trigger #define FTM2_POL (*(volatile uint32_t *)0x400B8070) // Channels Polarity #define FTM2_FMS (*(volatile uint32_t *)0x400B8074) // Fault Mode Status #define FTM2_FILTER (*(volatile uint32_t *)0x400B8078) // Input Capture Filter Control #define FTM2_FLTCTRL (*(volatile uint32_t *)0x400B807C) // Fault Control #define FTM2_QDCTRL (*(volatile uint32_t *)0x400B8080) // Quadrature Decoder Control And Status #define FTM2_CONF (*(volatile uint32_t *)0x400B8084) // Configuration #define FTM2_FLTPOL (*(volatile uint32_t *)0x400B8088) // FTM Fault Input Polarity #define FTM2_SYNCONF (*(volatile uint32_t *)0x400B808C) // Synchronization Configuration #define FTM2_INVCTRL (*(volatile uint32_t *)0x400B8090) // FTM Inverting Control #define FTM2_SWOCTRL (*(volatile uint32_t *)0x400B8094) // FTM Software Output Control #define FTM2_PWMLOAD (*(volatile uint32_t *)0x400B8098) // FTM PWM Load #define FTM3_SC (*(volatile uint32_t *)0x400B9000) // Status And Control #define FTM3_CNT (*(volatile uint32_t *)0x400B9004) // Counter #define FTM3_MOD (*(volatile uint32_t *)0x400B9008) // Modulo #define FTM3_C0SC (*(volatile uint32_t *)0x400B900C) // Channel 0 Status And Control #define FTM3_C0V (*(volatile uint32_t *)0x400B9010) // Channel 0 Value #define FTM3_C1SC (*(volatile uint32_t *)0x400B9014) // Channel 1 Status And Control #define FTM3_C1V (*(volatile uint32_t *)0x400B9018) // Channel 1 Value #define FTM3_C2SC (*(volatile uint32_t *)0x400B901C) // Channel 1 Status And Control #define FTM3_C2V (*(volatile uint32_t *)0x400B9020) // Channel 1 Value #define FTM3_C3SC (*(volatile uint32_t *)0x400B9024) // Channel 1 Status And Control #define FTM3_C3V (*(volatile uint32_t *)0x400B9028) // Channel 1 Value #define FTM3_C4SC (*(volatile uint32_t *)0x400B902C) // Channel 1 Status And Control #define FTM3_C4V (*(volatile uint32_t *)0x400B9030) // Channel 1 Value #define FTM3_C5SC (*(volatile uint32_t *)0x400B9034) // Channel 1 Status And Control #define FTM3_C5V (*(volatile uint32_t *)0x400B9038) // Channel 1 Value #define FTM3_C6SC (*(volatile uint32_t *)0x400B903C) // Channel 1 Status And Control #define FTM3_C6V (*(volatile uint32_t *)0x400B9040) // Channel 1 Value #define FTM3_C7SC (*(volatile uint32_t *)0x400B9044) // Channel 1 Status And Control #define FTM3_C7V (*(volatile uint32_t *)0x400B9048) // Channel 1 Value #define FTM3_CNTIN (*(volatile uint32_t *)0x400B904C) // Counter Initial Value #define FTM3_STATUS (*(volatile uint32_t *)0x400B9050) // Capture And Compare Status #define FTM3_MODE (*(volatile uint32_t *)0x400B9054) // Features Mode Selection #define FTM3_SYNC (*(volatile uint32_t *)0x400B9058) // Synchronization #define FTM3_OUTINIT (*(volatile uint32_t *)0x400B905C) // Initial State For Channels Output #define FTM3_OUTMASK (*(volatile uint32_t *)0x400B9060) // Output Mask #define FTM3_COMBINE (*(volatile uint32_t *)0x400B9064) // Function For Linked Channels #define FTM3_DEADTIME (*(volatile uint32_t *)0x400B9068) // Deadtime Insertion Control #define FTM3_EXTTRIG (*(volatile uint32_t *)0x400B906C) // FTM External Trigger #define FTM3_POL (*(volatile uint32_t *)0x400B9070) // Channels Polarity #define FTM3_FMS (*(volatile uint32_t *)0x400B9074) // Fault Mode Status #define FTM3_FILTER (*(volatile uint32_t *)0x400B9078) // Input Capture Filter Control #define FTM3_FLTCTRL (*(volatile uint32_t *)0x400B907C) // Fault Control #define FTM3_QDCTRL (*(volatile uint32_t *)0x400B9080) // Quadrature Decoder Control And Status #define FTM3_CONF (*(volatile uint32_t *)0x400B9084) // Configuration #define FTM3_FLTPOL (*(volatile uint32_t *)0x400B9088) // FTM Fault Input Polarity #define FTM3_SYNCONF (*(volatile uint32_t *)0x400B908C) // Synchronization Configuration #define FTM3_INVCTRL (*(volatile uint32_t *)0x400B9090) // FTM Inverting Control #define FTM3_SWOCTRL (*(volatile uint32_t *)0x400B9094) // FTM Software Output Control #define FTM3_PWMLOAD (*(volatile uint32_t *)0x400B9098) // FTM PWM Load #elif defined(KINETISL) #define FTM2_SC (*(volatile uint32_t *)0x4003A000) // Status And Control #define FTM2_CNT (*(volatile uint32_t *)0x4003A004) // Counter #define FTM2_MOD (*(volatile uint32_t *)0x4003A008) // Modulo #define FTM2_C0SC (*(volatile uint32_t *)0x4003A00C) // Channel 0 Status And Control #define FTM2_C0V (*(volatile uint32_t *)0x4003A010) // Channel 0 Value #define FTM2_C1SC (*(volatile uint32_t *)0x4003A014) // Channel 1 Status And Control #define FTM2_C1V (*(volatile uint32_t *)0x4003A018) // Channel 1 Value #define FTM2_STATUS (*(volatile uint32_t *)0x4003A050) // Capture And Compare Status #define FTM2_CONF (*(volatile uint32_t *)0x4003A084) // Configuration #endif // Periodic Interrupt Timer (PIT) #define PIT_MCR (*(volatile uint32_t *)0x40037000) // PIT Module Control Register #define PIT_MCR_MDIS (1<<1) // Module disable #define PIT_MCR_FRZ (1<<0) // Freeze #if defined(KINETISL) #define PIT_LTMR64H (*(volatile uint32_t *)0x400370E0) // PIT Upper Lifetime Timer Register #define PIT_LTMR64L (*(volatile uint32_t *)0x400370E4) // PIT Lower Lifetime Timer Register #endif // defined(KINETISL) #define PIT_LDVAL0 (*(volatile uint32_t *)0x40037100) // Timer Load Value Register #define PIT_CVAL0 (*(volatile uint32_t *)0x40037104) // Current Timer Value Register #define PIT_TCTRL0 (*(volatile uint32_t *)0x40037108) // Timer Control Register #define PIT_TCTRL_CHN (1<<2) // Chain Mode #define PIT_TCTRL_TIE (1<<1) // Timer Interrupt Enable #define PIT_TCTRL_TEN (1<<0) // Timer Enable #define PIT_TFLG0 (*(volatile uint32_t *)0x4003710C) // Timer Flag Register #define PIT_TFLG_TIF (1<<0) // Timer Interrupt Flag (write 1 to clear) #define PIT_LDVAL1 (*(volatile uint32_t *)0x40037110) // Timer Load Value Register #define PIT_CVAL1 (*(volatile uint32_t *)0x40037114) // Current Timer Value Register #define PIT_TCTRL1 (*(volatile uint32_t *)0x40037118) // Timer Control Register #define PIT_TFLG1 (*(volatile uint32_t *)0x4003711C) // Timer Flag Register #if defined(KINETISK) // the 3.1 has 4 PITs, LC has only 2 #define PIT_LDVAL2 (*(volatile uint32_t *)0x40037120) // Timer Load Value Register #define PIT_CVAL2 (*(volatile uint32_t *)0x40037124) // Current Timer Value Register #define PIT_TCTRL2 (*(volatile uint32_t *)0x40037128) // Timer Control Register #define PIT_TFLG2 (*(volatile uint32_t *)0x4003712C) // Timer Flag Register #define PIT_LDVAL3 (*(volatile uint32_t *)0x40037130) // Timer Load Value Register #define PIT_CVAL3 (*(volatile uint32_t *)0x40037134) // Current Timer Value Register #define PIT_TCTRL3 (*(volatile uint32_t *)0x40037138) // Timer Control Register #define PIT_TFLG3 (*(volatile uint32_t *)0x4003713C) // Timer Flag Register #endif // defined(KINETISK) // Low-Power Timer (LPTMR) #define LPTMR0_CSR (*(volatile uint32_t *)0x40040000) // Low Power Timer Control Status Register #define LPTMR_CSR_TCF 0x80 // Compare Flag #define LPTMR_CSR_TIE 0x40 // Interrupt Enable #define LPTMR_CSR_TPS(n) (((n) & 3) << 4) // Pin: 0=CMP0, 1=xtal, 2=pin13 #define LPTMR_CSR_TPP 0x08 // Pin Polarity #define LPTMR_CSR_TFC 0x04 // Free-Running Counter #define LPTMR_CSR_TMS 0x02 // Mode Select, 0=timer, 1=counter #define LPTMR_CSR_TEN 0x01 // Enable #define LPTMR0_PSR (*(volatile uint32_t *)0x40040004) // Low Power Timer Prescale Register #define LPTMR_PSR_PRESCALE(n) (((n) & 15) << 3) // Prescaler value #define LPTMR_PSR_PBYP 0x04 // Prescaler bypass #define LPTMR_PSR_PCS(n) (((n) & 3) << 0) // Clock: 0=MCGIRCLK, 1=LPO(1kHz), 2=ERCLK32K, 3=OSCERCLK #define LPTMR0_CMR (*(volatile uint32_t *)0x40040008) // Low Power Timer Compare Register #define LPTMR0_CNR (*(volatile uint32_t *)0x4004000C) // Low Power Timer Counter Register // Carrier Modulator Transmitter (CMT) #define CMT_CGH1 (*(volatile uint8_t *)0x40062000) // CMT Carrier Generator High Data Register 1 #define CMT_CGL1 (*(volatile uint8_t *)0x40062001) // CMT Carrier Generator Low Data Register 1 #define CMT_CGH2 (*(volatile uint8_t *)0x40062002) // CMT Carrier Generator High Data Register 2 #define CMT_CGL2 (*(volatile uint8_t *)0x40062003) // CMT Carrier Generator Low Data Register 2 #define CMT_OC (*(volatile uint8_t *)0x40062004) // CMT Output Control Register #define CMT_MSC (*(volatile uint8_t *)0x40062005) // CMT Modulator Status and Control Register #define CMT_CMD1 (*(volatile uint8_t *)0x40062006) // CMT Modulator Data Register Mark High #define CMT_CMD2 (*(volatile uint8_t *)0x40062007) // CMT Modulator Data Register Mark Low #define CMT_CMD3 (*(volatile uint8_t *)0x40062008) // CMT Modulator Data Register Space High #define CMT_CMD4 (*(volatile uint8_t *)0x40062009) // CMT Modulator Data Register Space Low #define CMT_PPS (*(volatile uint8_t *)0x4006200A) // CMT Primary Prescaler Register #define CMT_DMA (*(volatile uint8_t *)0x4006200B) // CMT Direct Memory Access Register // Real Time Clock (RTC) #define RTC_TSR (*(volatile uint32_t *)0x4003D000) // RTC Time Seconds Register #define RTC_TPR (*(volatile uint32_t *)0x4003D004) // RTC Time Prescaler Register #define RTC_TAR (*(volatile uint32_t *)0x4003D008) // RTC Time Alarm Register #define RTC_TCR (*(volatile uint32_t *)0x4003D00C) // RTC Time Compensation Register #define RTC_TCR_CIC(n) (((n) & 255) << 24) // Compensation Interval Counter #define RTC_TCR_TCV(n) (((n) & 255) << 16) // Time Compensation Value #define RTC_TCR_CIR(n) (((n) & 255) << 8) // Compensation Interval Register #define RTC_TCR_TCR(n) (((n) & 255) << 0) // Time Compensation Register #define RTC_CR (*(volatile uint32_t *)0x4003D010) // RTC Control Register #define RTC_CR_SC2P ((uint32_t)0x00002000) // #define RTC_CR_SC4P ((uint32_t)0x00001000) // #define RTC_CR_SC8P ((uint32_t)0x00000800) // #define RTC_CR_SC16P ((uint32_t)0x00000400) // #define RTC_CR_CLKO ((uint32_t)0x00000200) // #define RTC_CR_OSCE ((uint32_t)0x00000100) // #define RTC_CR_UM ((uint32_t)0x00000008) // #define RTC_CR_SUP ((uint32_t)0x00000004) // #define RTC_CR_WPE ((uint32_t)0x00000002) // #define RTC_CR_SWR ((uint32_t)0x00000001) // #define RTC_SR (*(volatile uint32_t *)0x4003D014) // RTC Status Register #define RTC_SR_TCE ((uint32_t)0x00000010) // #define RTC_SR_TAF ((uint32_t)0x00000004) // #define RTC_SR_TOF ((uint32_t)0x00000002) // #define RTC_SR_TIF ((uint32_t)0x00000001) // #define RTC_LR (*(volatile uint32_t *)0x4003D018) // RTC Lock Register #define RTC_IER (*(volatile uint32_t *)0x4003D01C) // RTC Interrupt Enable Register #define RTC_WAR (*(volatile uint32_t *)0x4003D800) // RTC Write Access Register #define RTC_RAR (*(volatile uint32_t *)0x4003D804) // RTC Read Access Register // 10/100-Mbps Ethernet MAC (ENET) #define ENET_EIR (*(volatile uint32_t *)0x400C0004) // Interrupt Event Register #define ENET_EIR_BABR ((uint32_t)0x40000000) // Babbling Receive Error #define ENET_EIR_BABT ((uint32_t)0x20000000) // Babbling Transmit Error #define ENET_EIR_GRA ((uint32_t)0x10000000) // Graceful Stop Complete #define ENET_EIR_TXF ((uint32_t)0x08000000) // Transmit Frame Interrupt #define ENET_EIR_TXB ((uint32_t)0x04000000) // Transmit Buffer Interrupt #define ENET_EIR_RXF ((uint32_t)0x02000000) // Receive Frame Interrupt #define ENET_EIR_RXB ((uint32_t)0x01000000) // Receive Buffer Interrupt #define ENET_EIR_MII ((uint32_t)0x00800000) // MII Interrupt #define ENET_EIR_EBERR ((uint32_t)0x00400000) // Ethernet Bus Error #define ENET_EIR_LC ((uint32_t)0x00200000) // Late Collision #define ENET_EIR_RL ((uint32_t)0x00100000) // Collision Retry Limit #define ENET_EIR_UN ((uint32_t)0x00080000) // Transmit FIFO Underrun #define ENET_EIR_PLR ((uint32_t)0x00040000) // Payload Receive Error #define ENET_EIR_WAKEUP ((uint32_t)0x00020000) // Node Wakeup Request Indication #define ENET_EIR_TS_AVAIL ((uint32_t)0x00010000) // Transmit Timestamp Available #define ENET_EIR_TS_TIMER ((uint32_t)0x00008000) // Timestamp Timer #define ENET_EIMR (*(volatile uint32_t *)0x400C0008) // Interrupt Mask Register #define ENET_EIRM_BABR ((uint32_t)0x40000000) // Babbling Receive Error Mask #define ENET_EIRM_BABT ((uint32_t)0x20000000) // Babbling Transmit Error Mask #define ENET_EIRM_GRA ((uint32_t)0x10000000) // Graceful Stop Complete Mask #define ENET_EIRM_TXF ((uint32_t)0x08000000) // Transmit Frame Interrupt Mask #define ENET_EIRM_TXB ((uint32_t)0x04000000) // Transmit Buffer Interrupt Mask #define ENET_EIRM_RXF ((uint32_t)0x02000000) // Receive Frame Interrupt Mask #define ENET_EIRM_RXB ((uint32_t)0x01000000) // Receive Buffer Interrupt Mask #define ENET_EIRM_MII ((uint32_t)0x00800000) // MII Interrupt Mask #define ENET_EIRM_EBERR ((uint32_t)0x00400000) // Ethernet Bus Error Mask #define ENET_EIRM_LC ((uint32_t)0x00200000) // Late Collision Mask #define ENET_EIRM_RL ((uint32_t)0x00100000) // Collision Retry Limit Mask #define ENET_EIRM_UN ((uint32_t)0x00080000) // Transmit FIFO Underrun Mask #define ENET_EIRM_PLR ((uint32_t)0x00040000) // Payload Receive Error Mask #define ENET_EIRM_WAKEUP ((uint32_t)0x00020000) // Node Wakeup Request Indication Mask #define ENET_EIRM_TS_AVAIL ((uint32_t)0x00010000) // Transmit Timestamp Available Mask #define ENET_EIRM_TS_TIMER ((uint32_t)0x00008000) // Timestamp Timer Mask #define ENET_RDAR (*(volatile uint32_t *)0x400C0010) // Receive Descriptor Active Register #define ENET_RDAR_RDAR ((uint32_t)0x01000000) #define ENET_TDAR (*(volatile uint32_t *)0x400C0014) // Transmit Descriptor Active Register #define ENET_TDAR_TDAR ((uint32_t)0x01000000) #define ENET_ECR (*(volatile uint32_t *)0x400C0024) // Ethernet Control Register #define ENET_ECR_DBSWP ((uint32_t)0x00000100) // Descriptor Byte Swapping Enable #define ENET_ECR_STOPEN ((uint32_t)0x00000080) // STOPEN Signal Control #define ENET_ECR_DBGEN ((uint32_t)0x00000040) // Debug Enable #define ENET_ECR_EN1588 ((uint32_t)0x00000010) // EN1588 Enable #define ENET_ECR_SLEEP ((uint32_t)0x00000008) // Sleep Mode Enable #define ENET_ECR_MAGICEN ((uint32_t)0x00000004) // Magic Packet Detection Enable #define ENET_ECR_ETHEREN ((uint32_t)0x00000002) // Ethernet Enable #define ENET_ECR_RESET ((uint32_t)0x00000001) // Ethernet MAC Reset #define ENET_MMFR (*(volatile uint32_t *)0x400C0040) // MII Management Frame Register #define ENET_MMFR_ST(n) (uint32_t)(((n) & 0x3) << 30) #define ENET_MMFR_OP(n) (uint32_t)(((n) & 0x3) << 28) #define ENET_MMFR_PA(n) (uint32_t)(((n) & 0x1F) << 23) #define ENET_MMFR_RA(n) (uint32_t)(((n) & 0x1F) << 18) #define ENET_MMFR_TA(n) (uint32_t)(((n) & 0x3) << 16) #define ENET_MMFR_DATA(n) (uint32_t)(((n) & 0xFFFF) << 0) #define ENET_MMFR_DATA_MASK ((uint32_t)0x0000FFFF) #define ENET_MSCR (*(volatile uint32_t *)0x400C0044) // MII Speed Control Register #define ENET_MSCR_HOLDTIME(n) (uint32_t)(((n) & 0x7) << 8) #define ENET_MSCR_DIS_PRE ((uint32_t)0x00000080) #define ENET_MSCR_MII_SPEED(n) (uint32_t)(((n) & 0x3F) << 1) #define ENET_MIBC (*(volatile uint32_t *)0x400C0064) // MIB Control Register #define ENET_MIBC_MIB_DIS ((uint32_t)0x80000000) // Disable MIB Logic #define ENET_MIBC_MIB_IDLE ((uint32_t)0x40000000) // MIB Idle #define ENET_MIBC_MIB_CLEAR ((uint32_t)0x20000000) // MIB Clear #define ENET_RCR (*(volatile uint32_t *)0x400C0084) // Receive Control Register #define ENET_RCR_GRS ((uint32_t)0x80000000) // Graceful Receive Stopped #define ENET_RCR_NLC ((uint32_t)0x40000000) // Payload Length Check Disable #define ENET_RCR_MAX_FL(n) (uint32_t)(((n) & 0x3FFF)<<16) // Maximum Frame Length #define ENET_RCR_CFEN ((uint32_t)0x00008000) // MAC Control Frame Enable #define ENET_RCR_CRCFWD ((uint32_t)0x00004000) // Terminate/Forward Received CRC #define ENET_RCR_PAUFWD ((uint32_t)0x00002000) // Terminate/Forward Pause Frames #define ENET_RCR_PADEN ((uint32_t)0x00001000) // Enable Frame Padding Remove On Receive #define ENET_RCR_RMII_10T ((uint32_t)0x00000200) // Enables 10-Mbps mode of the RMII #define ENET_RCR_RMII_MODE ((uint32_t)0x00000100) // RMII Mode Enable #define ENET_RCR_FCE ((uint32_t)0x00000020) // Flow Control Enable #define ENET_RCR_BC_REJ ((uint32_t)0x00000010) // Broadcast Frame Reject #define ENET_RCR_PROM ((uint32_t)0x00000008) // Promiscuous Mode #define ENET_RCR_MII_MODE ((uint32_t)0x00000004) // Media Independent Interface Mode #define ENET_RCR_DRT ((uint32_t)0x00000002) // Disable Receive On Transmit #define ENET_RCR_LOOP ((uint32_t)0x00000001) // Internal Loopback #define ENET_TCR (*(volatile uint32_t *)0x400C00C4) // Transmit Control Register #define ENET_TCR_CRCFWD ((uint32_t)0x00000200) // Forward Frame From Application With CRC #define ENET_TCR_ADDINS ((uint32_t)0x00000100) // Set MAC Address On Transmit #define ENET_TCR_ADDSEL(n) (uint32_t)(((n) & 0x7)<<5) // Source MAC Address Select On Transmit #define ENET_TCR_RFC_PAUSE ((uint32_t)0x00000010) // Receive Frame Control Pause #define ENET_TCR_TFC_PAUSE ((uint32_t)0x00000008) // Transmit Frame Control Pause #define ENET_TCR_FDEN ((uint32_t)0x00000004) // Full-Duplex Enable #define ENET_TCR_GTS ((uint32_t)0x00000001) // Graceful Transmit Stop #define ENET_PALR (*(volatile uint32_t *)0x400C00E4) // Physical Address Lower Register #define ENET_PAUR (*(volatile uint32_t *)0x400C00E8) // Physical Address Upper Register #define ENET_OPD (*(volatile uint32_t *)0x400C00EC) // Opcode/Pause Duration Register #define ENET_IAUR (*(volatile uint32_t *)0x400C0118) // Descriptor Individual Upper Address Register #define ENET_IALR (*(volatile uint32_t *)0x400C011C) // Descriptor Individual Lower Address Register #define ENET_GAUR (*(volatile uint32_t *)0x400C0120) // Descriptor Group Upper Address Register #define ENET_GALR (*(volatile uint32_t *)0x400C0124) // Descriptor Group Lower Address Register #define ENET_TFWR (*(volatile uint32_t *)0x400C0144) // Transmit FIFO Watermark Register #define ENET_TFWR_STRFWD ((uint32_t)0x00000100) // Store And Forward Enable #define ENET_TFWR_TFWR(n) (uint32_t)(((n) & 0x3F)<<0) // Transmit FIFO Write (X64 bytes) #define ENET_RDSR (*(volatile uint32_t *)0x400C0180) // Receive Descriptor Ring Start Register #define ENET_TDSR (*(volatile uint32_t *)0x400C0184) // Transmit Buffer Descriptor Ring Start Register #define ENET_MRBR (*(volatile uint32_t *)0x400C0188) // Maximum Receive Buffer Size Register #define ENET_RSFL (*(volatile uint32_t *)0x400C0190) // Receive FIFO Section Full Threshold #define ENET_RSEM (*(volatile uint32_t *)0x400C0194) // Receive FIFO Section Empty Threshold #define ENET_RSEM_STAT_SECTION_EMPTY(n) (uint32_t)(((n) & 0x7)<<5) // RX Status FIFO Section Empty Threshold #define ENET_RSEM_RX_SECTION_EMPTY(n) (uint32_t)(((n) & 0x7)<<5) // Value Of The Receive FIFO Section Empty Threshold #define ENET_RAEM (*(volatile uint32_t *)0x400C0198) // Receive FIFO Almost Empty Threshold #define ENET_RAFL (*(volatile uint32_t *)0x400C019C) // Receive FIFO Almost Full Threshold #define ENET_TSEM (*(volatile uint32_t *)0x400C01A0) // Transmit FIFO Section Empty Threshold #define ENET_TAEM (*(volatile uint32_t *)0x400C01A4) // Transmit FIFO Almost Empty Threshold #define ENET_TAFL (*(volatile uint32_t *)0x400C01A8) // Transmit FIFO Almost Full Threshold #define ENET_TIPG (*(volatile uint32_t *)0x400C01AC) // Transmit Inter-Packet Gap #define ENET_FTRL (*(volatile uint32_t *)0x400C01B0) // Frame Truncation Length #define ENET_TACC (*(volatile uint32_t *)0x400C01C0) // Transmit Accelerator Function Configuration #define ENET_TACC_PROCHK ((uint32_t)0x00000010) // Enables insertion of protocol checksum #define ENET_TACC_IPCHK ((uint32_t)0x00000008) // Enables insertion of IP header checksum #define ENET_TACC_SHIFT16 ((uint32_t)0x00000001) // TX FIFO Shift-16 (align data to 32 bits) #define ENET_RACC (*(volatile uint32_t *)0x400C01C4) // Receive Accelerator Function Configuration #define ENET_RACC_SHIFT16 ((uint32_t)0x00000080) // RX FIFO Shift-16 (align data to 32 bits) #define ENET_RACC_LINEDIS ((uint32_t)0x00000040) // Enable Discard Of Frames With MAC Layer Errors #define ENET_RACC_PRODIS ((uint32_t)0x00000004) // Enable Discard Of Frames With Wrong Protocol Checksum #define ENET_RACC_IPDIS ((uint32_t)0x00000002) // Enable Discard Of Frames With Wrong IPv4 Header Checksum #define ENET_RACC_PADREM ((uint32_t)0x00000001) // Enable Padding Removal For Short IP Frames #define ENET_RMON_T_DROP (*(volatile uint32_t *)0x400C0200) // Reserved Statistic Register #define ENET_RMON_T_PACKETS (*(volatile uint32_t *)0x400C0204) // Tx Packet Count Statistic Register #define ENET_RMON_T_BC_PKT (*(volatile uint32_t *)0x400C0208) // Tx Broadcast Packets Statistic Register #define ENET_RMON_T_MC_PKT (*(volatile uint32_t *)0x400C020C) // Tx Multicast Packets Statistic Register #define ENET_RMON_T_CRC_ALIGN (*(volatile uint32_t *)0x400C0210) // Tx Packets with CRC/Align Error Statistic Register #define ENET_RMON_T_UNDERSIZE (*(volatile uint32_t *)0x400C0214) // Tx Packets Less Than Bytes and Good CRC Statistic Register #define ENET_RMON_T_OVERSIZE (*(volatile uint32_t *)0x400C0218) // Tx Packets GT MAX_FL bytes and Good CRC Statistic Register #define ENET_RMON_T_FRAG (*(volatile uint32_t *)0x400C021C) // Tx Packets Less Than 64 Bytes and Bad CRC Statistic Register #define ENET_RMON_T_JAB (*(volatile uint32_t *)0x400C0220) // Tx Packets Greater Than MAX_FL bytes and Bad CRC Statistic Register #define ENET_RMON_T_COL (*(volatile uint32_t *)0x400C0224) // Tx Collision Count Statistic Register #define ENET_RMON_T_P64 (*(volatile uint32_t *)0x400C0228) // Tx 64-Byte Packets Statistic Register #define ENET_RMON_T_P65TO127 (*(volatile uint32_t *)0x400C022C) // Tx 65- to 127-byte Packets Statistic Register #define ENET_RMON_T_P128TO255 (*(volatile uint32_t *)0x400C0230) // Tx 128- to 255-byte Packets Statistic Register #define ENET_RMON_T_P256TO511 (*(volatile uint32_t *)0x400C0234) // Tx 256- to 511-byte Packets Statistic Register #define ENET_RMON_T_P512TO1023 (*(volatile uint32_t *)0x400C0238) // Tx 512- to 1023-byte Packets Statistic Register #define ENET_RMON_T_P1024TO2047 (*(volatile uint32_t *)0x400C023C) // Tx 1024- to 2047-byte Packets Statistic Register #define ENET_RMON_T_P_GTE2048 (*(volatile uint32_t *)0x400C0240) // Tx Packets Greater Than 2048 Bytes Statistic Register #define ENET_RMON_T_OCTETS (*(volatile uint32_t *)0x400C0244) // Tx Octets Statistic Register #define ENET_IEEE_T_DROP (*(volatile uint32_t *)0x400C0248) // IEEE_T_DROP Reserved Statistic Register #define ENET_IEEE_T_FRAME_OK (*(volatile uint32_t *)0x400C024C) // Frames Transmitted OK Statistic Register #define ENET_IEEE_T_1COL (*(volatile uint32_t *)0x400C0250) // Frames Transmitted with Single Collision Statistic Register #define ENET_IEEE_T_MCOL (*(volatile uint32_t *)0x400C0254) // Frames Transmitted with Multiple Collisions Statistic Register #define ENET_IEEE_T_DEF (*(volatile uint32_t *)0x400C0258) // Frames Transmitted after Deferral Delay Statistic Register #define ENET_IEEE_T_LCOL (*(volatile uint32_t *)0x400C025C) // Frames Transmitted with Late Collision Statistic Register #define ENET_IEEE_T_EXCOL (*(volatile uint32_t *)0x400C0260) // Frames Transmitted with Excessive Collisions Statistic Register #define ENET_IEEE_T_MACERR (*(volatile uint32_t *)0x400C0264) // Frames Transmitted with Tx FIFO Underrun Statistic Register #define ENET_IEEE_T_CSERR (*(volatile uint32_t *)0x400C0268) // Frames Transmitted with Carrier Sense Error Statistic Register #define ENET_IEEE_T_SQE (*(volatile uint32_t *)0x400C026C) // ?? #define ENET_IEEE_T_FDXFC (*(volatile uint32_t *)0x400C0270) // Flow Control Pause Frames Transmitted Statistic Register #define ENET_IEEE_T_OCTETS_OK (*(volatile uint32_t *)0x400C0274) // Octet Count for Frames Transmitted w/o Error Statistic Register #define ENET_RMON_R_PACKETS (*(volatile uint32_t *)0x400C0284) // Rx Packet Count Statistic Register #define ENET_RMON_R_BC_PKT (*(volatile uint32_t *)0x400C0288) // Rx Broadcast Packets Statistic Register #define ENET_RMON_R_MC_PKT (*(volatile uint32_t *)0x400C028C) // Rx Multicast Packets Statistic Register #define ENET_RMON_R_CRC_ALIGN (*(volatile uint32_t *)0x400C0290) // Rx Packets with CRC/Align Error Statistic Register #define ENET_RMON_R_UNDERSIZE (*(volatile uint32_t *)0x400C0294) // Rx Packets with Less Than 64 Bytes and Good CRC Statistic Register #define ENET_RMON_R_OVERSIZE (*(volatile uint32_t *)0x400C0298) // Rx Packets Greater Than MAX_FL and Good CRC Statistic Register #define ENET_RMON_R_FRAG (*(volatile uint32_t *)0x400C029C) // Rx Packets Less Than 64 Bytes and Bad CRC Statistic Register #define ENET_RMON_R_JAB (*(volatile uint32_t *)0x400C02A0) // Rx Packets Greater Than MAX_FL Bytes and Bad CRC Statistic Register #define ENET_RMON_R_RESVD_0 (*(volatile uint32_t *)0x400C02A4) // Reserved Statistic Register #define ENET_RMON_R_P64 (*(volatile uint32_t *)0x400C02A8) // Rx 64-Byte Packets Statistic Register #define ENET_RMON_R_P65TO127 (*(volatile uint32_t *)0x400C02AC) // Rx 65- to 127-Byte Packets Statistic Register #define ENET_RMON_R_P128TO255 (*(volatile uint32_t *)0x400C02B0) // Rx 128- to 255-Byte Packets Statistic Register #define ENET_RMON_R_P256TO511 (*(volatile uint32_t *)0x400C02B4) // Rx 256- to 511-Byte Packets Statistic Register #define ENET_RMON_R_P512TO1023 (*(volatile uint32_t *)0x400C02B8) // Rx 512- to 1023-Byte Packets Statistic Register #define ENET_RMON_R_P1024TO2047 (*(volatile uint32_t *)0x400C02BC) // Rx 1024- to 2047-Byte Packets Statistic Register #define ENET_RMON_R_P_GTE2048 (*(volatile uint32_t *)0x400C02C0) // Rx Packets Greater than 2048 Bytes Statistic Register #define ENET_RMON_R_OCTETS (*(volatile uint32_t *)0x400C02C4) // Rx Octets Statistic Register #define ENET_IEEE_R_DROP (*(volatile uint32_t *)0x400C02C8) // Frames not Counted Correctly Statistic Register #define ENET_IEEE_R_FRAME_OK (*(volatile uint32_t *)0x400C02CC) // Frames Received OK Statistic Register #define ENET_IEEE_R_CRC (*(volatile uint32_t *)0x400C02D0) // Frames Received with CRC Error Statistic Register #define ENET_IEEE_R_ALIGN (*(volatile uint32_t *)0x400C02D4) // Frames Received with Alignment Error Statistic Register #define ENET_IEEE_R_MACERR (*(volatile uint32_t *)0x400C02D8) // Receive FIFO Overflow Count Statistic Register #define ENET_IEEE_R_FDXFC (*(volatile uint32_t *)0x400C02DC) // Flow Control Pause Frames Received Statistic Register #define ENET_IEEE_R_OCTETS_OK (*(volatile uint32_t *)0x400C02E0) // Octet Count for Frames Received without Error Statistic Register #define ENET_ATCR (*(volatile uint32_t *)0x400C0400) // Adjustable Timer Control Register #define ENET_ATCR_SLAVE ((uint32_t)0x00002000) // Enable Timer Slave Mode #define ENET_ATCR_CAPTURE ((uint32_t)0x00000800) // Capture Timer Value #define ENET_ATCR_RESTART ((uint32_t)0x00000400) // Reset Timer #define ENET_ATCR_PINPER ((uint32_t)0x00000080) // Enables event signal output assertion on period event #define ENET_ATCR_PEREN ((uint32_t)0x00000010) // Enable Periodical Event #define ENET_ATCR_OFFRST ((uint32_t)0x00000008) // Reset Timer On Offset Event #define ENET_ATCR_OFFEN ((uint32_t)0x00000004) // Enable One-Shot Offset Event #define ENET_ATCR_EN ((uint32_t)0x00000001) // Enable Timer #define ENET_ATVR (*(volatile uint32_t *)0x400C0404) // Timer Value Register #define ENET_ATOFF (*(volatile uint32_t *)0x400C0408) // Timer Offset Register #define ENET_ATPER (*(volatile uint32_t *)0x400C040C) // Timer Period Register #define ENET_ATCOR (*(volatile uint32_t *)0x400C0410) // Timer Correction Register #define ENET_ATINC (*(volatile uint32_t *)0x400C0414) // Time-Stamping Clock Period Register #define ENET_ATINC_INC_CORR(n) (uint32_t)(((n) & 0x7F)<<8) // Correction Increment Value #define ENET_ATINC_INC(n) (uint32_t)(((n) & 0x7F)<<0) // Clock Period Of The Timestamping Clock (ts_clk) In Nanoseconds #define ENET_ATSTMP (*(volatile uint32_t *)0x400C0418) // Timestamp of Last Transmitted Frame #define ENET_TGSR (*(volatile uint32_t *)0x400C0604) // Timer Global Status Register #define ENET_TGSR_TF3 ((uint32_t)0x00000008) // Timer Flag For Channel 3 #define ENET_TGSR_TF2 ((uint32_t)0x00000004) // Timer Flag For Channel 2 #define ENET_TGSR_TF1 ((uint32_t)0x00000002) // Timer Flag For Channel 1 #define ENET_TGSR_TF0 ((uint32_t)0x00000001) // Timer Flag For Channel 0 #define ENET_TCSR0 (*(volatile uint32_t *)0x400C0608) // Timer Control Status Register #define ENET_TCSR_TF ((uint32_t)0x00000080) // Timer Flag #define ENET_TCSR_TIR ((uint32_t)0x00000040) // Timer Interrupt Enable #define ENET_TCSR_TMODE(n) (uint32_t)(((n) & 0xF)<<2) // Timer Mode #define ENET_TCSR_TDRE ((uint32_t)0x00000001) // Timer DMA Request Enable #define ENET_TCCR0 (*(volatile uint32_t *)0x400C060C) // Timer Compare Capture Register #define ENET_TCSR1 (*(volatile uint32_t *)0x400C0610) // Timer Control Status Register #define ENET_TCCR1 (*(volatile uint32_t *)0x400C0614) // Timer Compare Capture Register #define ENET_TCSR2 (*(volatile uint32_t *)0x400C0618) // Timer Control Status Register #define ENET_TCCR2 (*(volatile uint32_t *)0x400C061C) // Timer Compare Capture Register #define ENET_TCSR3 (*(volatile uint32_t *)0x400C0620) // Timer Control Status Register #define ENET_TCCR3 (*(volatile uint32_t *)0x400C0624) // Timer Compare Capture Register // Universal Serial Bus OTG Controller (USBOTG) #define USB0_PERID (*(const uint8_t *)0x40072000) // Peripheral ID register #define USB0_IDCOMP (*(const uint8_t *)0x40072004) // Peripheral ID Complement register #define USB0_REV (*(const uint8_t *)0x40072008) // Peripheral Revision register #define USB0_ADDINFO (*(volatile uint8_t *)0x4007200C) // Peripheral Additional Info register #define USB0_OTGISTAT (*(volatile uint8_t *)0x40072010) // OTG Interrupt Status register #define USB_OTGISTAT_IDCHG ((uint8_t)0x80) // #define USB_OTGISTAT_ONEMSEC ((uint8_t)0x40) // #define USB_OTGISTAT_LINE_STATE_CHG ((uint8_t)0x20) // #define USB_OTGISTAT_SESSVLDCHG ((uint8_t)0x08) // #define USB_OTGISTAT_B_SESS_CHG ((uint8_t)0x04) // #define USB_OTGISTAT_AVBUSCHG ((uint8_t)0x01) // #define USB0_OTGICR (*(volatile uint8_t *)0x40072014) // OTG Interrupt Control Register #define USB_OTGICR_IDEN ((uint8_t)0x80) // #define USB_OTGICR_ONEMSECEN ((uint8_t)0x40) // #define USB_OTGICR_LINESTATEEN ((uint8_t)0x20) // #define USB_OTGICR_SESSVLDEN ((uint8_t)0x08) // #define USB_OTGICR_BSESSEN ((uint8_t)0x04) // #define USB_OTGICR_AVBUSEN ((uint8_t)0x01) // #define USB0_OTGSTAT (*(volatile uint8_t *)0x40072018) // OTG Status register #define USB_OTGSTAT_ID ((uint8_t)0x80) // #define USB_OTGSTAT_ONEMSECEN ((uint8_t)0x40) // #define USB_OTGSTAT_LINESTATESTABLE ((uint8_t)0x20) // #define USB_OTGSTAT_SESS_VLD ((uint8_t)0x08) // #define USB_OTGSTAT_BSESSEND ((uint8_t)0x04) // #define USB_OTGSTAT_AVBUSVLD ((uint8_t)0x01) // #define USB0_OTGCTL (*(volatile uint8_t *)0x4007201C) // OTG Control Register #define USB_OTGCTL_DPHIGH ((uint8_t)0x80) // #define USB_OTGCTL_DPLOW ((uint8_t)0x20) // #define USB_OTGCTL_DMLOW ((uint8_t)0x10) // #define USB_OTGCTL_OTGEN ((uint8_t)0x04) // #define USB0_ISTAT (*(volatile uint8_t *)0x40072080) // Interrupt Status Register #define USB_ISTAT_STALL ((uint8_t)0x80) // #define USB_ISTAT_ATTACH ((uint8_t)0x40) // #define USB_ISTAT_RESUME ((uint8_t)0x20) // #define USB_ISTAT_SLEEP ((uint8_t)0x10) // #define USB_ISTAT_TOKDNE ((uint8_t)0x08) // #define USB_ISTAT_SOFTOK ((uint8_t)0x04) // #define USB_ISTAT_ERROR ((uint8_t)0x02) // #define USB_ISTAT_USBRST ((uint8_t)0x01) // #define USB0_INTEN (*(volatile uint8_t *)0x40072084) // Interrupt Enable Register #define USB_INTEN_STALLEN ((uint8_t)0x80) // #define USB_INTEN_ATTACHEN ((uint8_t)0x40) // #define USB_INTEN_RESUMEEN ((uint8_t)0x20) // #define USB_INTEN_SLEEPEN ((uint8_t)0x10) // #define USB_INTEN_TOKDNEEN ((uint8_t)0x08) // #define USB_INTEN_SOFTOKEN ((uint8_t)0x04) // #define USB_INTEN_ERROREN ((uint8_t)0x02) // #define USB_INTEN_USBRSTEN ((uint8_t)0x01) // #define USB0_ERRSTAT (*(volatile uint8_t *)0x40072088) // Error Interrupt Status Register #define USB_ERRSTAT_BTSERR ((uint8_t)0x80) // #define USB_ERRSTAT_DMAERR ((uint8_t)0x20) // #define USB_ERRSTAT_BTOERR ((uint8_t)0x10) // #define USB_ERRSTAT_DFN8 ((uint8_t)0x08) // #define USB_ERRSTAT_CRC16 ((uint8_t)0x04) // #define USB_ERRSTAT_CRC5EOF ((uint8_t)0x02) // #define USB_ERRSTAT_PIDERR ((uint8_t)0x01) // #define USB0_ERREN (*(volatile uint8_t *)0x4007208C) // Error Interrupt Enable Register #define USB_ERREN_BTSERREN ((uint8_t)0x80) // #define USB_ERREN_DMAERREN ((uint8_t)0x20) // #define USB_ERREN_BTOERREN ((uint8_t)0x10) // #define USB_ERREN_DFN8EN ((uint8_t)0x08) // #define USB_ERREN_CRC16EN ((uint8_t)0x04) // #define USB_ERREN_CRC5EOFEN ((uint8_t)0x02) // #define USB_ERREN_PIDERREN ((uint8_t)0x01) // #define USB0_STAT (*(volatile uint8_t *)0x40072090) // Status Register #define USB_STAT_TX ((uint8_t)0x08) // #define USB_STAT_ODD ((uint8_t)0x04) // #define USB_STAT_ENDP(n) ((uint8_t)((n) >> 4)) // #define USB0_CTL (*(volatile uint8_t *)0x40072094) // Control Register #define USB_CTL_JSTATE ((uint8_t)0x80) // #define USB_CTL_SE0 ((uint8_t)0x40) // #define USB_CTL_TXSUSPENDTOKENBUSY ((uint8_t)0x20) // #define USB_CTL_RESET ((uint8_t)0x10) // #define USB_CTL_HOSTMODEEN ((uint8_t)0x08) // #define USB_CTL_RESUME ((uint8_t)0x04) // #define USB_CTL_ODDRST ((uint8_t)0x02) // #define USB_CTL_USBENSOFEN ((uint8_t)0x01) // #define USB0_ADDR (*(volatile uint8_t *)0x40072098) // Address Register #define USB0_BDTPAGE1 (*(volatile uint8_t *)0x4007209C) // BDT Page Register 1 #define USB0_FRMNUML (*(volatile uint8_t *)0x400720A0) // Frame Number Register Low #define USB0_FRMNUMH (*(volatile uint8_t *)0x400720A4) // Frame Number Register High #define USB0_TOKEN (*(volatile uint8_t *)0x400720A8) // Token Register #define USB0_SOFTHLD (*(volatile uint8_t *)0x400720AC) // SOF Threshold Register #define USB0_BDTPAGE2 (*(volatile uint8_t *)0x400720B0) // BDT Page Register 2 #define USB0_BDTPAGE3 (*(volatile uint8_t *)0x400720B4) // BDT Page Register 3 #define USB0_ENDPT0 (*(volatile uint8_t *)0x400720C0) // Endpoint Control Register #define USB_ENDPT_HOSTWOHUB ((uint8_t)0x80) // host only, enable low speed #define USB_ENDPT_RETRYDIS ((uint8_t)0x40) // host only, set to disable NAK retry #define USB_ENDPT_EPCTLDIS ((uint8_t)0x10) // 0=control, 1=bulk, interrupt, isync #define USB_ENDPT_EPRXEN ((uint8_t)0x08) // enables the endpoint for RX transfers. #define USB_ENDPT_EPTXEN ((uint8_t)0x04) // enables the endpoint for TX transfers. #define USB_ENDPT_EPSTALL ((uint8_t)0x02) // set to stall endpoint #define USB_ENDPT_EPHSHK ((uint8_t)0x01) // enable handshaking during a transaction, generally set unless Isochronous #define USB0_ENDPT1 (*(volatile uint8_t *)0x400720C4) // Endpoint Control Register #define USB0_ENDPT2 (*(volatile uint8_t *)0x400720C8) // Endpoint Control Register #define USB0_ENDPT3 (*(volatile uint8_t *)0x400720CC) // Endpoint Control Register #define USB0_ENDPT4 (*(volatile uint8_t *)0x400720D0) // Endpoint Control Register #define USB0_ENDPT5 (*(volatile uint8_t *)0x400720D4) // Endpoint Control Register #define USB0_ENDPT6 (*(volatile uint8_t *)0x400720D8) // Endpoint Control Register #define USB0_ENDPT7 (*(volatile uint8_t *)0x400720DC) // Endpoint Control Register #define USB0_ENDPT8 (*(volatile uint8_t *)0x400720E0) // Endpoint Control Register #define USB0_ENDPT9 (*(volatile uint8_t *)0x400720E4) // Endpoint Control Register #define USB0_ENDPT10 (*(volatile uint8_t *)0x400720E8) // Endpoint Control Register #define USB0_ENDPT11 (*(volatile uint8_t *)0x400720EC) // Endpoint Control Register #define USB0_ENDPT12 (*(volatile uint8_t *)0x400720F0) // Endpoint Control Register #define USB0_ENDPT13 (*(volatile uint8_t *)0x400720F4) // Endpoint Control Register #define USB0_ENDPT14 (*(volatile uint8_t *)0x400720F8) // Endpoint Control Register #define USB0_ENDPT15 (*(volatile uint8_t *)0x400720FC) // Endpoint Control Register #define USB0_USBCTRL (*(volatile uint8_t *)0x40072100) // USB Control Register #define USB_USBCTRL_SUSP ((uint8_t)0x80) // Places the USB transceiver into the suspend state. #define USB_USBCTRL_PDE ((uint8_t)0x40) // Enables the weak pulldowns on the USB transceiver. #define USB0_OBSERVE (*(volatile uint8_t *)0x40072104) // USB OTG Observe Register #define USB_OBSERVE_DPPU ((uint8_t)0x80) // #define USB_OBSERVE_DPPD ((uint8_t)0x40) // #define USB_OBSERVE_DMPD ((uint8_t)0x10) // #define USB0_CONTROL (*(volatile uint8_t *)0x40072108) // USB OTG Control Register #define USB_CONTROL_DPPULLUPNONOTG ((uint8_t)0x10) // Provides control of the DP PULLUP in the USB OTG module, if USB is configured in non-OTG device mode. #define USB0_USBTRC0 (*(volatile uint8_t *)0x4007210C) // USB Transceiver Control Register 0 #define USB_USBTRC_USBRESET ((uint8_t)0x80) // #define USB_USBTRC_USBRESMEN ((uint8_t)0x20) // #define USB_USBTRC_SYNC_DET ((uint8_t)0x02) // #define USB_USBTRC_USB_RESUME_INT ((uint8_t)0x01) // #define USB0_USBFRMADJUST (*(volatile uint8_t *)0x40072114) // Frame Adjust Register #define USB0_CLK_RECOVER_CTRL (*(volatile uint8_t *)0x40072140) // USB Clock recovery control #define USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN ((uint8_t)0x80) #define USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN ((uint8_t)0x40) #define USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN ((uint8_t)0x20) #define USB0_CLK_RECOVER_IRC_EN (*(volatile uint8_t *)0x40072144) // IRC48M oscillator enable #define USB_CLK_RECOVER_IRC_EN_IRC_EN ((uint8_t)0x02) #define USB_CLK_RECOVER_IRC_EN_REG_EN ((uint8_t)0x01) #define USB0_CLK_RECOVER_INT_EN (*(volatile uint8_t *)0x40072154) // Clock recovery combined interrupt enable #define USB_CLK_RECOVER_INT_EN_OVF_ERROR_EN ((uint8_t)0x10) #define USB0_CLK_RECOVER_INT_STATUS (*(volatile uint8_t *)0x4007215C) // Clock recovery separated interrupt status #define USB_CLK_RECOVER_INT_STATUS_OVF_ERROR ((uint8_t)0x10) // USB Device Charger Detection Module (USBDCD) #define USBDCD_CONTROL (*(volatile uint32_t *)0x40035000) // Control register #define USBDCD_CONTROL_SR ((uint32_t)0x02000000) #define USBDCD_CONTROL_START ((uint32_t)0x01000000) #define USBDCD_CONTROL_BC12 ((uint32_t)0x00020000) #define USBDCD_CONTROL_IE ((uint32_t)0x00010000) #define USBDCD_CONTROL_IF ((uint32_t)0x00000100) #define USBDCD_CONTROL_IACK ((uint32_t)0x00000001) #define USBDCD_CLOCK (*(volatile uint32_t *)0x40035004) // Clock register #define USBDCD_CLOCK_CLOCK_SPEED(n) (uint32_t)(((n) & 0x3FF) << 2) #define USBDCD_CLOCK_CLOCK_UNIT ((uint32_t)0x00000001) #define USBDCD_STATUS (*(volatile uint32_t *)0x40035008) // Status register #define USBDCD_STATUS_ACTIVE ((uint32_t)0x00400000) #define USBDCD_STATUS_ID ((uint32_t)0x00200000) #define USBDCD_STATUS_ERR ((uint32_t)0x00100000) #define USBDCD_STATUS_SEQ_STAT(n) (uint32_t)(((n) & 0x3) << 18) #define USBDCD_STATUS_SEQ_STAT_MASK ((uint32_t)0x000C0000) #define USBDCD_STATUS_SEQ_RES(n) (uint32_t)(((n) & 0x3) << 16) #define USBDCD_STATUS_SEQ_RES_MASK ((uint32_t)0x00030000) #define USBDCD_TIMER0 (*(volatile uint32_t *)0x40035010) // TIMER0 register #define USBDCD_TIMER1 (*(volatile uint32_t *)0x40035014) // TIMER1 register #define USBDCD_TIMER2 (*(volatile uint32_t *)0x40035018) // TIMER2 register #define USBHSDCD_CONTROL (*(volatile uint32_t *)0x400A3000) // Control register #define USBHSDCD_CLOCK (*(volatile uint32_t *)0x400A3004) // Clock register #define USBHSDCD_STATUS (*(volatile uint32_t *)0x400A3008) // Status register #define USBHSDCD_TIMER0 (*(volatile uint32_t *)0x400A3010) // TIMER0 register #define USBHSDCD_TIMER1 (*(volatile uint32_t *)0x400A3014) // TIMER1 register #define USBHSDCD_TIMER2 (*(volatile uint32_t *)0x400A3018) // TIMER2 register // USB High Speed OTG Controller (USBHS) #define USBHS_ID (*(volatile uint32_t *)0x400A1000) // Identification Register #define USBHS_HWGENERAL (*(volatile uint32_t *)0x400A1004) // General Hardware Parameters Register #define USBHS_HWHOST (*(volatile uint32_t *)0x400A1008) // Host Hardware Parameters Register #define USBHS_HWDEVICE (*(volatile uint32_t *)0x400A100C) // Device Hardware Parameters Register #define USBHS_HWTXBUF (*(volatile uint32_t *)0x400A1010) // Transmit Buffer Hardware Parameters Register #define USBHS_HWRXBUF (*(volatile uint32_t *)0x400A1014) // Receive Buffer Hardware Parameters Register #define USBHS_GPTIMER0LD (*(volatile uint32_t *)0x400A1080) // General Purpose Timer n Load Register #define USBHS_GPTIMER0CTL (*(volatile uint32_t *)0x400A1084) // General Purpose Timer n Control Register #define USBHS_GPTIMERCTL_RUN ((uint32_t)0x80000000) #define USBHS_GPTIMERCTL_RST ((uint32_t)0x40000000) #define USBHS_GPTIMERCTL_MODE ((uint32_t)0x01000000) #define USBHS_GPTIMERCTL_GPTCNT(n) (uint32_t)(((n) & 0xFFFFFF) << 0) #define USBHS_GPTIMER1LD (*(volatile uint32_t *)0x400A1088) // General Purpose Timer n Load Register #define USBHS_GPTIMER1CTL (*(volatile uint32_t *)0x400A108C) // General Purpose Timer n Control Register #define USBHS_USB_SBUSCFG (*(volatile uint32_t *)0x400A1090) // System Bus Interface Configuration Register #define USBHS_HCIVERSION (*(volatile uint32_t *)0x400A1100) // Host Controller Interface Version and Capability Registers Length Register #define USBHS_HCSPARAMS (*(volatile uint32_t *)0x400A1104) // Host Controller Structural Parameters Register #define USBHS_HCCPARAMS (*(volatile uint32_t *)0x400A1108) // Host Controller Capability Parameters Register #define USBHS_DCIVERSION (*(volatile uint16_t *)0x400A1122) // Device Controller Interface Version #define USBHS_DCCPARAMS (*(volatile uint32_t *)0x400A1124) // Device Controller Capability Parameters #define USBHS_USBCMD (*(volatile uint32_t *)0x400A1140) // USB Command Register #define USBHS_USBCMD_ITC(n) (uint32_t)(((n) & 0xFF) << 16) #define USBHS_USBCMD_FS2 ((uint32_t)0x00008000) #define USBHS_USBCMD_ATDTW ((uint32_t)0x00004000) #define USBHS_USBCMD_SUTW ((uint32_t)0x00002000) #define USBHS_USBCMD_ASPE ((uint32_t)0x00000800) #define USBHS_USBCMD_ASP(n) (uint32_t)(((n) & 0x3) << 8) #define USBHS_USBCMD_IAA ((uint32_t)0x00000040) #define USBHS_USBCMD_ASE ((uint32_t)0x00000020) #define USBHS_USBCMD_PSE ((uint32_t)0x00000010) #define USBHS_USBCMD_FS(n) (uint32_t)(((n) & 0x3) << 2) #define USBHS_USBCMD_RST ((uint32_t)0x00000002) #define USBHS_USBCMD_RS ((uint32_t)0x00000001) #define USBHS_USBSTS (*(volatile uint32_t *)0x400A1144) // USB Status Register #define USBHS_USBSTS_TI1 ((uint32_t)0x02000000) #define USBHS_USBSTS_TI0 ((uint32_t)0x01000000) #define USBHS_USBSTS_UPI ((uint32_t)0x00080000) #define USBHS_USBSTS_UAI ((uint32_t)0x00040000) #define USBHS_USBSTS_NAKI ((uint32_t)0x00010000) #define USBHS_USBSTS_AS ((uint32_t)0x00008000) #define USBHS_USBSTS_PS ((uint32_t)0x00004000) #define USBHS_USBSTS_RCL ((uint32_t)0x00002000) #define USBHS_USBSTS_HCH ((uint32_t)0x00001000) #define USBHS_USBSTS_SLI ((uint32_t)0x00000100) #define USBHS_USBSTS_SRI ((uint32_t)0x00000080) #define USBHS_USBSTS_URI ((uint32_t)0x00000040) #define USBHS_USBSTS_AAI ((uint32_t)0x00000020) #define USBHS_USBSTS_SEI ((uint32_t)0x00000010) #define USBHS_USBSTS_FRI ((uint32_t)0x00000008) #define USBHS_USBSTS_PCI ((uint32_t)0x00000004) #define USBHS_USBSTS_UEI ((uint32_t)0x00000002) #define USBHS_USBSTS_UI ((uint32_t)0x00000001) #define USBHS_USBINTR (*(volatile uint32_t *)0x400A1148) // USB Interrupt Enable Register #define USBHS_USBINTR_TIE1 ((uint32_t)0x02000000) #define USBHS_USBINTR_TIE0 ((uint32_t)0x01000000) #define USBHS_USBINTR_UPIE ((uint32_t)0x00080000) #define USBHS_USBINTR_UAIE ((uint32_t)0x00040000) #define USBHS_USBINTR_NAKE ((uint32_t)0x00010000) #define USBHS_USBINTR_SLE ((uint32_t)0x00000100) #define USBHS_USBINTR_SRE ((uint32_t)0x00000080) #define USBHS_USBINTR_URE ((uint32_t)0x00000040) #define USBHS_USBINTR_AAE ((uint32_t)0x00000020) #define USBHS_USBINTR_SEE ((uint32_t)0x00000010) #define USBHS_USBINTR_FRE ((uint32_t)0x00000008) #define USBHS_USBINTR_PCE ((uint32_t)0x00000004) #define USBHS_USBINTR_UEE ((uint32_t)0x00000002) #define USBHS_USBINTR_UE ((uint32_t)0x00000001) #define USBHS_FRINDEX (*(volatile uint32_t *)0x400A114C) // Frame Index Register #define USBHS_PERIODICLISTBASE (*(volatile uint32_t *)0x400A1154) // Periodic Frame List Base Address Register #define USBHS_DEVICEADDR (*(volatile uint32_t *)0x400A1154) // Device Address Register #define USBHS_DEVICEADDR_USBADR(n) (uint32_t)(((n) & 0x7F) << 25) #define USBHS_DEVICEADDR_USBADRA ((uint32_t)0x01000000) #define USBHS_ASYNCLISTADDR (*(volatile uint32_t *)0x400A1158) // Current Asynchronous List Address Register #define USBHS_EPLISTADDR (*(volatile uint32_t *)0x400A1158) // Endpoint List Address Register #define USBHS_TTCTRL (*(volatile uint32_t *)0x400A115C) // Host TT Asynchronous Buffer Control #define USBHS_TTCTRL_TTHA(n) (uint32_t)(((n) & 0x7F) << 24) #define USBHS_BURSTSIZE (*(volatile uint32_t *)0x400A1160) // Master Interface Data Burst Size Register #define USBHS_BURSTSIZE_TXPBURST(n) (uint32_t)(((n) & 0xFF) << 8) #define USBHS_BURSTSIZE_RXPBURST(n) (uint32_t)(((n) & 0xFF) << 0) #define USBHS_TXFILLTUNING (*(volatile uint32_t *)0x400A1164) // Transmit FIFO Tuning Control Register #define USBHS_TXFILLTUNING_TXFIFOTHRES(n) (uint32_t)(((n) & 0x3F) << 16) #define USBHS_TXFILLTUNING_TXSCHHEALTH(n) (uint32_t)(((n) & 0x1F) << 8) #define USBHS_TXFILLTUNING_TXSCHOH(n) (uint32_t)(((n) & 0x7F) << 0) #define USBHS_ENDPTNAK (*(volatile uint32_t *)0x400A1178) // Endpoint NAK Register #define USBHS_ENDPTNAKEN (*(volatile uint32_t *)0x400A117C) // Endpoint NAK Enable Register #define USBHS_CONFIGFLAG (*(volatile uint32_t *)0x400A1180) // Configure Flag Register #define USBHS_PORTSC1 (*(volatile uint32_t *)0x400A1184) // Port Status and Control Registers #define USBHS_PORTSC_PTS(n) (uint32_t)(((n) & 0x3) << 30) #define USBHS_PORTSC_PSPD(n) (uint32_t)(((n) & 0x3) << 26) #define USBHS_PORTSC_PTS2 ((uint32_t)0x02000000) #define USBHS_PORTSC_PFSC ((uint32_t)0x01000000) #define USBHS_PORTSC_PHCD ((uint32_t)0x00800000) #define USBHS_PORTSC_WKOC ((uint32_t)0x00400000) #define USBHS_PORTSC_WKDS ((uint32_t)0x00200000) #define USBHS_PORTSC_WKCN ((uint32_t)0x00100000) #define USBHS_PORTSC_PTC(n) (uint32_t)(((n) & 0xF) << 16) #define USBHS_PORTSC_PIC(n) (uint32_t)(((n) & 0x3) << 14) #define USBHS_PORTSC_PO ((uint32_t)0x00002000) #define USBHS_PORTSC_PP ((uint32_t)0x00001000) #define USBHS_PORTSC_LS(n) (uint32_t)(((n) & 0x3) << 10) #define USBHS_PORTSC_HSP ((uint32_t)0x00000200) #define USBHS_PORTSC_PR ((uint32_t)0x00000100) #define USBHS_PORTSC_SUSP ((uint32_t)0x00000080) #define USBHS_PORTSC_FPR ((uint32_t)0x00000040) #define USBHS_PORTSC_OCC ((uint32_t)0x00000020) #define USBHS_PORTSC_OCA ((uint32_t)0x00000010) #define USBHS_PORTSC_PEC ((uint32_t)0x00000008) #define USBHS_PORTSC_PE ((uint32_t)0x00000004) #define USBHS_PORTSC_CSC ((uint32_t)0x00000002) #define USBHS_PORTSC_CCS ((uint32_t)0x00000001) #define USBHS_OTGSC (*(volatile uint32_t *)0x400A11A4) // On-the-Go Status and Control Register #define USBHS_OTGSC_DPIE ((uint32_t)0x40000000) #define USBHS_OTGSC_MSE ((uint32_t)0x20000000) #define USBHS_OTGSC_BSEIE ((uint32_t)0x10000000) #define USBHS_OTGSC_BSVIE ((uint32_t)0x08000000) #define USBHS_OTGSC_ASVIE ((uint32_t)0x04000000) #define USBHS_OTGSC_AVVIE ((uint32_t)0x02000000) #define USBHS_OTGSC_IDIE ((uint32_t)0x01000000) #define USBHS_OTGSC_DPIS ((uint32_t)0x00400000) #define USBHS_OTGSC_MSS ((uint32_t)0x00200000) #define USBHS_OTGSC_BSEIS ((uint32_t)0x00100000) #define USBHS_OTGSC_BSVIS ((uint32_t)0x00080000) #define USBHS_OTGSC_ASVIS ((uint32_t)0x00040000) #define USBHS_OTGSC_AVVIS ((uint32_t)0x00020000) #define USBHS_OTGSC_IDIS ((uint32_t)0x00010000) #define USBHS_OTGSC_DPS ((uint32_t)0x00004000) #define USBHS_OTGSC_MST ((uint32_t)0x00002000) #define USBHS_OTGSC_BSE ((uint32_t)0x00001000) #define USBHS_OTGSC_BSV ((uint32_t)0x00000800) #define USBHS_OTGSC_ASV ((uint32_t)0x00000400) #define USBHS_OTGSC_AVV ((uint32_t)0x00000200) #define USBHS_OTGSC_ID ((uint32_t)0x00000100) #define USBHS_OTGSC_HABA ((uint32_t)0x00000080) #define USBHS_OTGSC_IDPU ((uint32_t)0x00000020) #define USBHS_OTGSC_DP ((uint32_t)0x00000010) #define USBHS_OTGSC_OT ((uint32_t)0x00000008) #define USBHS_OTGSC_HAAR ((uint32_t)0x00000004) #define USBHS_OTGSC_VC ((uint32_t)0x00000002) #define USBHS_OTGSC_VD ((uint32_t)0x00000001) #define USBHS_USBMODE (*(volatile uint32_t *)0x400A11A8) // USB Mode Register #define USBHS_USBMODE_TXHSD(n) (uint32_t)(((n) & 0x7) << 12) #define USBHS_USBMODE_SDIS ((uint32_t)0x00000010) #define USBHS_USBMODE_SLOM ((uint32_t)0x00000008) #define USBHS_USBMODE_ES ((uint32_t)0x00000004) #define USBHS_USBMODE_CM(n) (uint32_t)(((n) & 0x3) << 0) #define USBHS_EPSETUPSR (*(volatile uint32_t *)0x400A11AC) // Endpoint Setup Status Register #define USBHS_EPPRIME (*(volatile uint32_t *)0x400A11B0) // Endpoint Initialization Register #define USBHS_EPFLUSH (*(volatile uint32_t *)0x400A11B4) // Endpoint Flush Register #define USBHS_EPSR (*(volatile uint32_t *)0x400A11B8) // Endpoint Status Register #define USBHS_EPCOMPLETE (*(volatile uint32_t *)0x400A11BC) // Endpoint Complete Register #define USBHS_EPCR0 (*(volatile uint32_t *)0x400A11C0) // Endpoint Control Register 0 #define USBHS_EPCR_TXE ((uint32_t)0x00800000) #define USBHS_EPCR_TXR ((uint32_t)0x00400000) #define USBHS_EPCR_TXI ((uint32_t)0x00200000) #define USBHS_EPCR_TXT(n) (uint32_t)(((n) & 0x3) << 18) #define USBHS_EPCR_TXD ((uint32_t)0x00020000) #define USBHS_EPCR_TXS ((uint32_t)0x00010000) #define USBHS_EPCR_RXE ((uint32_t)0x00000080) #define USBHS_EPCR_RXR ((uint32_t)0x00000040) #define USBHS_EPCR_RXI ((uint32_t)0x00000020) #define USBHS_EPCR_RXT(n) (uint32_t)(((n) & 0x3) << 2) #define USBHS_EPCR_RXD ((uint32_t)0x00000002) #define USBHS_EPCR_RXS ((uint32_t)0x00000001) #define USBHS_EPCR1 (*(volatile uint32_t *)0x400A11C4) // Endpoint Control Register 1 #define USBHS_EPCR2 (*(volatile uint32_t *)0x400A11C8) // Endpoint Control Register 2 #define USBHS_EPCR3 (*(volatile uint32_t *)0x400A11CC) // Endpoint Control Register 3 #define USBHS_EPCR4 (*(volatile uint32_t *)0x400A11D0) // Endpoint Control Register 4 #define USBHS_EPCR5 (*(volatile uint32_t *)0x400A11D4) // Endpoint Control Register 5 #define USBHS_EPCR6 (*(volatile uint32_t *)0x400A11D8) // Endpoint Control Register 6 #define USBHS_EPCR7 (*(volatile uint32_t *)0x400A11DC) // Endpoint Control Register 7 #define USBHS_USBGENCTRL (*(volatile uint32_t *)0x400A1200) // USB General Control Register #define USBHS_USBGENCTRL_WU_INT_CLR ((uint32_t)0x00000020) #define USBHS_USBGENCTRL_WU_IE ((uint32_t)0x00000001) // Universal Serial Bus 2.0 Integrated PHY (USB-PHY) #define USBPHY_PWD (*(volatile uint32_t *)0x400A2000) // USB PHY Power-Down Register #define USBPHY_PWD_RXPWDRX ((uint32_t)0x00100000) #define USBPHY_PWD_RXPWDDIFF ((uint32_t)0x00080000) #define USBPHY_PWD_RXPWD1PT1 ((uint32_t)0x00040000) #define USBPHY_PWD_RXPWDENV ((uint32_t)0x00020000) #define USBPHY_PWD_TXPWDV2I ((uint32_t)0x00001000) #define USBPHY_PWD_TXPWDIBIAS ((uint32_t)0x00000800) #define USBPHY_PWD_TXPWDFS ((uint32_t)0x00000400) #define USBPHY_PWD_SET (*(volatile uint32_t *)0x400A2004) // USB PHY Power-Down Register #define USBPHY_PWD_CLR (*(volatile uint32_t *)0x400A2008) // USB PHY Power-Down Register #define USBPHY_PWD_TOG (*(volatile uint32_t *)0x400A200C) // USB PHY Power-Down Register #define USBPHY_TX (*(volatile uint32_t *)0x400A2010) // USB PHY Transmitter Control Register #define USBPHY_TX_SET (*(volatile uint32_t *)0x400A2014) // USB PHY Transmitter Control Register #define USBPHY_TX_CLR (*(volatile uint32_t *)0x400A2018) // USB PHY Transmitter Control Register #define USBPHY_TX_TOG (*(volatile uint32_t *)0x400A201C) // USB PHY Transmitter Control Register #define USBPHY_RX (*(volatile uint32_t *)0x400A2020) // USB PHY Receiver Control Register #define USBPHY_RX_SET (*(volatile uint32_t *)0x400A2024) // USB PHY Receiver Control Register #define USBPHY_RX_CLR (*(volatile uint32_t *)0x400A2028) // USB PHY Receiver Control Register #define USBPHY_RX_TOG (*(volatile uint32_t *)0x400A202C) // USB PHY Receiver Control Register #define USBPHY_CTRL (*(volatile uint32_t *)0x400A2030) // USB PHY General Control Register #define USBPHY_CTRL_SFTRST ((uint32_t)0x80000000) #define USBPHY_CTRL_CLKGATE ((uint32_t)0x40000000) #define USBPHY_CTRL_UTMI_SUSPENDM ((uint32_t)0x20000000) #define USBPHY_CTRL_HOST_FORCE_LS_SE0 ((uint32_t)0x10000000) #define USBPHY_CTRL_OTG_ID_VALUE ((uint32_t)0x08000000) #define USBPHY_CTRL_FSDLL_RST_EN ((uint32_t)0x01000000) #define USBPHY_CTRL_ENAUTOCLR_PHY_PWD ((uint32_t)0x00100000) #define USBPHY_CTRL_ENAUTOCLR_CLKGATE ((uint32_t)0x00080000) #define USBPHY_CTRL_AUTORESUME_EN ((uint32_t)0x00040000) #define USBPHY_CTRL_ENUTMILEVEL3 ((uint32_t)0x00008000) #define USBPHY_CTRL_ENUTMILEVEL2 ((uint32_t)0x00004000) #define USBPHY_CTRL_DEVPLUGIN_IRQ ((uint32_t)0x00001000) #define USBPHY_CTRL_ENDEVPLUGINDET ((uint32_t)0x00000010) #define USBPHY_CTRL_HOSTDISCONDETECT_IRQ ((uint32_t)0x00000008) #define USBPHY_CTRL_ENHOSTDISCONDETECT ((uint32_t)0x00000002) #define USBPHY_CTRL_SET (*(volatile uint32_t *)0x400A2034) // USB PHY General Control Register #define USBPHY_CTRL_CLR (*(volatile uint32_t *)0x400A2038) // USB PHY General Control Register #define USBPHY_CTRL_TOG (*(volatile uint32_t *)0x400A203C) // USB PHY General Control Register #define USBPHY_STATUS (*(volatile uint32_t *)0x400A2040) // USB PHY Status Register #define USBPHY_STATUS_RESUME_STATUS ((uint32_t)0x00000400) #define USBPHY_STATUS_OTGID_STATUS ((uint32_t)0x00000100) #define USBPHY_STATUS_DEVPLUGIN_STATUS ((uint32_t)0x00000040) #define USBPHY_STATUS_HOSTDISCONDETECT_STATUS ((uint32_t)0x00000008) #define USBPHY_DEBUG (*(volatile uint32_t *)0x400A2050) // USB PHY Debug Register #define USBPHY_DEBUG_SET (*(volatile uint32_t *)0x400A2054) // USB PHY Debug Register #define USBPHY_DEBUG_CLR (*(volatile uint32_t *)0x400A2058) // USB PHY Debug Register #define USBPHY_DEBUG_TOG (*(volatile uint32_t *)0x400A205C) // USB PHY Debug Register #define USBPHY_DEBUG0_STATUS (*(volatile uint32_t *)0x400A2060) // UTMI Debug Status Register 0 #define USBPHY_DEBUG1 (*(volatile uint32_t *)0x400A2070) // UTMI Debug Status Register 1 #define USBPHY_DEBUG1_SET (*(volatile uint32_t *)0x400A2074) // UTMI Debug Status Register 1 #define USBPHY_DEBUG1_CLR (*(volatile uint32_t *)0x400A2078) // UTMI Debug Status Register 1 #define USBPHY_DEBUG1_TOG (*(volatile uint32_t *)0x400A207C) // UTMI Debug Status Register 1 #define USBPHY_VERSION (*(volatile uint32_t *)0x400A2080) // UTMI RTL Version #define USBPHY_PLL_SIC (*(volatile uint32_t *)0x400A20A0) // USB PHY PLL Control/Status Register #define USBPHY_PLL_SIC_PLL_LOCK ((uint32_t)0x80000000) #define USBPHY_PLL_SIC_PLL_BYPASS ((uint32_t)0x00010000) #define USBPHY_PLL_SIC_PLL_ENABLE ((uint32_t)0x00002000) #define USBPHY_PLL_SIC_PLL_POWER ((uint32_t)0x00001000) #define USBPHY_PLL_SIC_PLL_HOLD_RING_OFF ((uint32_t)0x00000800) #define USBPHY_PLL_SIC_PLL_EN_USB_CLKS ((uint32_t)0x00000040) #define USBPHY_PLL_SIC_PLL_DIV_SEL(n) (uint32_t)((n) & 3) #define USBPHY_PLL_SIC_SET (*(volatile uint32_t *)0x400A20A4) // USB PHY PLL Control/Status Register #define USBPHY_PLL_SIC_CLR (*(volatile uint32_t *)0x400A20A8) // USB PHY PLL Control/Status Register #define USBPHY_PLL_SIC_TOG (*(volatile uint32_t *)0x400A20AC) // USB PHY PLL Control/Status Register #define USBPHY_USB1_VBUS_DETECT (*(volatile uint32_t *)0x400A20C0) // USB PHY VBUS Detect Control Register #define USBPHY_USB1_VBUS_DETECT_EN_CHARGER_RESISTOR ((uint32_t)0x80000000) #define USBPHY_USB1_VBUS_DETECT_DISCHARGE_VBUS ((uint32_t)0x04000000) #define USBPHY_USB1_VBUS_DETECT_PWRUP_CMPS ((uint32_t)0x00100000) #define USBPHY_USB1_VBUS_DETECT_VBUSVALID_TO_SESSVALID ((uint32_t)0x00040000) #define USBPHY_USB1_VBUS_DETECT_VBUS_SOURCE_SEL(n) (uint32_t)(((n) & 3) << 9) #define USBPHY_USB1_VBUS_DETECT_VBUSVALID_SEL ((uint32_t)0x00000100) #define USBPHY_USB1_VBUS_DETECT_VBUSVALID_OVERRIDE ((uint32_t)0x00000080) #define USBPHY_USB1_VBUS_DETECT_AVALID_OVERRIDE ((uint32_t)0x00000040) #define USBPHY_USB1_VBUS_DETECT_BVALID_OVERRIDE ((uint32_t)0x00000020) #define USBPHY_USB1_VBUS_DETECT_SESSEND_OVERRIDE ((uint32_t)0x00000010) #define USBPHY_USB1_VBUS_DETECT_VBUS_OVERRIDE_EN ((uint32_t)0x00000008) #define USBPHY_USB1_VBUS_DETECT_VBUSVALID_THRESH(n) ((uint32_t)((n) & 7) #define USBPHY_USB1_VBUS_DETECT_SET (*(volatile uint32_t *)0x400A20C4) // USB PHY VBUS Detect Control Register #define USBPHY_USB1_VBUS_DETECT_CLR (*(volatile uint32_t *)0x400A20C8) // USB PHY VBUS Detect Control Register #define USBPHY_USB1_VBUS_DETECT_TOG (*(volatile uint32_t *)0x400A20CC) // USB PHY VBUS Detect Control Register #define USBPHY_USB1_VBUS_DET_STAT (*(volatile uint32_t *)0x400A20D0) // USB PHY VBUS Detector Status Register #define USBPHY_USB1_VBUS_DET_STAT_VBUS_VALID_3V ((uint32_t)0x00000010) #define USBPHY_USB1_VBUS_DET_STAT_VBUS_VALID ((uint32_t)0x00000008) #define USBPHY_USB1_VBUS_DET_STAT_AVALID ((uint32_t)0x00000004) #define USBPHY_USB1_VBUS_DET_STAT_BVALID ((uint32_t)0x00000002) #define USBPHY_USB1_VBUS_DET_STAT_SESSEND ((uint32_t)0x00000001) #define USBPHY_USB1_CHRG_DET_STAT (*(volatile uint32_t *)0x400A20F0) // USB PHY Charger Detect Status Register #define USBPHY_USB1_CHRG_DET_STAT_SECDET_DCP ((uint32_t)0x00000010) #define USBPHY_USB1_CHRG_DET_STAT_DP_STATE ((uint32_t)0x00000008) #define USBPHY_USB1_CHRG_DET_STAT_DM_STATE ((uint32_t)0x00000004) #define USBPHY_USB1_CHRG_DET_STAT_CHRG_DETECTED ((uint32_t)0x00000002) #define USBPHY_USB1_CHRG_DET_STAT_PLUG_CONTACT ((uint32_t)0x00000001) #define USBPHY_ANACTRL (*(volatile uint32_t *)0x400A2100) // USB PHY Analog Control Register #define USBPHY_ANACTRL_SET (*(volatile uint32_t *)0x400A2104) // USB PHY Analog Control Register #define USBPHY_ANACTRL_CLR (*(volatile uint32_t *)0x400A2108) // USB PHY Analog Control Register #define USBPHY_ANACTRL_TOG (*(volatile uint32_t *)0x400A210C) // USB PHY Analog Control Register #define USBPHY_USB1_LOOPBACK (*(volatile uint32_t *)0x400A2110) // USB PHY Loopback Control/Status Register #define USBPHY_USB1_LOOPBACK_SET (*(volatile uint32_t *)0x400A2114) // USB PHY Loopback Control/Status Register #define USBPHY_USB1_LOOPBACK_CLR (*(volatile uint32_t *)0x400A2118) // USB PHY Loopback Control/Status Register #define USBPHY_USB1_LOOPBACK_TOG (*(volatile uint32_t *)0x400A211C) // USB PHY Loopback Control/Status Register #define USBPHY_USB1_LOOPBACK_HSFSCNT (*(volatile uint32_t *)0x400A2120) // USB PHY Loopback Packet Number Select Register #define USBPHY_USB1_LOOPBACK_HSFSCNT_SET (*(volatile uint32_t *)0x400A2124) // USB PHY Loopback Packet Number Select Register #define USBPHY_USB1_LOOPBACK_HSFSCNT_CLR (*(volatile uint32_t *)0x400A2128) // USB PHY Loopback Packet Number Select Register #define USBPHY_USB1_LOOPBACK_HSFSCNT_TOG (*(volatile uint32_t *)0x400A212C) // USB PHY Loopback Packet Number Select Register #define USBPHY_TRIM_OVERRIDE_EN (*(volatile uint32_t *)0x400A2130) // USB PHY Trim Override Enable Register #define USBPHY_TRIM_OVERRIDE_EN_SET (*(volatile uint32_t *)0x400A2134) // USB PHY Trim Override Enable Register #define USBPHY_TRIM_OVERRIDE_EN_CLR (*(volatile uint32_t *)0x400A2138) // USB PHY Trim Override Enable Register #define USBPHY_TRIM_OVERRIDE_EN_TOG (*(volatile uint32_t *)0x400A213C) // USB PHY Trim Override Enable Register // CAN - Controller Area Network (FlexCAN) #define CAN0_MCR (*(volatile uint32_t *)0x40024000) // Module Configuration Register #define CAN0_CTRL1 (*(volatile uint32_t *)0x40024004) // Control 1 register #define CAN0_TIMER (*(volatile uint32_t *)0x40024008) // Free Running Timer #define CAN0_RXMGMASK (*(volatile uint32_t *)0x40024010) // Rx Mailboxes Global Mask Register #define CAN0_RX14MASK (*(volatile uint32_t *)0x40024014) // Rx 14 Mask register #define CAN0_RX15MASK (*(volatile uint32_t *)0x40024018) // Rx 15 Mask register #define CAN0_ECR (*(volatile uint32_t *)0x4002401C) // Error Counter #define CAN0_ESR1 (*(volatile uint32_t *)0x40024020) // Error and Status 1 register #define CAN0_IMASK1 (*(volatile uint32_t *)0x40024028) // Interrupt Masks 1 register #define CAN0_IFLAG1 (*(volatile uint32_t *)0x40024030) // Interrupt Flags 1 register #define CAN0_CTRL2 (*(volatile uint32_t *)0x40024034) // Control 2 register #define CAN0_ESR2 (*(volatile uint32_t *)0x40024038) // Error and Status 2 register #define CAN0_CRCR (*(volatile uint32_t *)0x40024044) // CRC Register #define CAN0_RXFGMASK (*(volatile uint32_t *)0x40024048) // Rx FIFO Global Mask register #define CAN0_RXFIR (*(volatile uint32_t *)0x4002404C) // Rx FIFO Information Register #define CAN0_RXIMR0 (*(volatile uint32_t *)0x40024880) // Rx Individual Mask Registers #define CAN0_RXIMR1 (*(volatile uint32_t *)0x40024884) // Rx Individual Mask Registers #define CAN0_RXIMR2 (*(volatile uint32_t *)0x40024888) // Rx Individual Mask Registers #define CAN0_RXIMR3 (*(volatile uint32_t *)0x4002488C) // Rx Individual Mask Registers #define CAN0_RXIMR4 (*(volatile uint32_t *)0x40024890) // Rx Individual Mask Registers #define CAN0_RXIMR5 (*(volatile uint32_t *)0x40024894) // Rx Individual Mask Registers #define CAN0_RXIMR6 (*(volatile uint32_t *)0x40024898) // Rx Individual Mask Registers #define CAN0_RXIMR7 (*(volatile uint32_t *)0x4002489C) // Rx Individual Mask Registers #define CAN0_RXIMR8 (*(volatile uint32_t *)0x400248A0) // Rx Individual Mask Registers #define CAN0_RXIMR9 (*(volatile uint32_t *)0x400248A4) // Rx Individual Mask Registers #define CAN0_RXIMR10 (*(volatile uint32_t *)0x400248A8) // Rx Individual Mask Registers #define CAN0_RXIMR11 (*(volatile uint32_t *)0x400248AC) // Rx Individual Mask Registers #define CAN0_RXIMR12 (*(volatile uint32_t *)0x400248B0) // Rx Individual Mask Registers #define CAN0_RXIMR13 (*(volatile uint32_t *)0x400248B4) // Rx Individual Mask Registers #define CAN0_RXIMR14 (*(volatile uint32_t *)0x400248B8) // Rx Individual Mask Registers #define CAN0_RXIMR15 (*(volatile uint32_t *)0x400248BC) // Rx Individual Mask Registers #define CAN1_MCR (*(volatile uint32_t *)0x400A4000) // Module Configuration Register #define CAN1_CTRL1 (*(volatile uint32_t *)0x400A4004) // Control 1 register #define CAN1_TIMER (*(volatile uint32_t *)0x400A4008) // Free Running Timer #define CAN1_RXMGMASK (*(volatile uint32_t *)0x400A4010) // Rx Mailboxes Global Mask Register #define CAN1_RX14MASK (*(volatile uint32_t *)0x400A4014) // Rx 14 Mask register #define CAN1_RX15MASK (*(volatile uint32_t *)0x400A4018) // Rx 15 Mask register #define CAN1_ECR (*(volatile uint32_t *)0x400A401C) // Error Counter #define CAN1_ESR1 (*(volatile uint32_t *)0x400A4020) // Error and Status 1 register #define CAN1_IMASK1 (*(volatile uint32_t *)0x400A4028) // Interrupt Masks 1 register #define CAN1_IFLAG1 (*(volatile uint32_t *)0x400A4030) // Interrupt Flags 1 register #define CAN1_CTRL2 (*(volatile uint32_t *)0x400A4034) // Control 2 register #define CAN1_ESR2 (*(volatile uint32_t *)0x400A4038) // Error and Status 2 register #define CAN1_CRCR (*(volatile uint32_t *)0x400A4044) // CRC Register #define CAN1_RXFGMASK (*(volatile uint32_t *)0x400A4048) // Rx FIFO Global Mask register #define CAN1_RXFIR (*(volatile uint32_t *)0x400A404C) // Rx FIFO Information Register #define CAN1_RXIMR0 (*(volatile uint32_t *)0x400A4880) // Rx Individual Mask Registers #define CAN1_RXIMR1 (*(volatile uint32_t *)0x400A4884) // Rx Individual Mask Registers #define CAN1_RXIMR2 (*(volatile uint32_t *)0x400A4888) // Rx Individual Mask Registers #define CAN1_RXIMR3 (*(volatile uint32_t *)0x400A488C) // Rx Individual Mask Registers #define CAN1_RXIMR4 (*(volatile uint32_t *)0x400A4890) // Rx Individual Mask Registers #define CAN1_RXIMR5 (*(volatile uint32_t *)0x400A4894) // Rx Individual Mask Registers #define CAN1_RXIMR6 (*(volatile uint32_t *)0x400A4898) // Rx Individual Mask Registers #define CAN1_RXIMR7 (*(volatile uint32_t *)0x400A489C) // Rx Individual Mask Registers #define CAN1_RXIMR8 (*(volatile uint32_t *)0x400A48A0) // Rx Individual Mask Registers #define CAN1_RXIMR9 (*(volatile uint32_t *)0x400A48A4) // Rx Individual Mask Registers #define CAN1_RXIMR10 (*(volatile uint32_t *)0x400A48A8) // Rx Individual Mask Registers #define CAN1_RXIMR11 (*(volatile uint32_t *)0x400A48AC) // Rx Individual Mask Registers #define CAN1_RXIMR12 (*(volatile uint32_t *)0x400A48B0) // Rx Individual Mask Registers #define CAN1_RXIMR13 (*(volatile uint32_t *)0x400A48B4) // Rx Individual Mask Registers #define CAN1_RXIMR14 (*(volatile uint32_t *)0x400A48B8) // Rx Individual Mask Registers #define CAN1_RXIMR15 (*(volatile uint32_t *)0x400A48BC) // Rx Individual Mask Registers // SPI (DSPI) #if defined(KINETISK) typedef struct { volatile uint32_t MCR; // 0 volatile uint32_t unused1;// 4 volatile uint32_t TCR; // 8 volatile uint32_t CTAR0; // c volatile uint32_t CTAR1; // 10 volatile uint32_t CTAR2; // 14 volatile uint32_t CTAR3; // 18 volatile uint32_t CTAR4; // 1c volatile uint32_t CTAR5; // 20 volatile uint32_t CTAR6; // 24 volatile uint32_t CTAR7; // 28 volatile uint32_t SR; // 2c volatile uint32_t RSER; // 30 volatile uint32_t PUSHR; // 34 volatile uint32_t POPR; // 38 volatile uint32_t TXFR[16]; // 3c volatile uint32_t RXFR[16]; // 7c } KINETISK_SPI_t; #define KINETISK_SPI0 (*(KINETISK_SPI_t *)0x4002C000) #define SPI0_MCR (KINETISK_SPI0.MCR) // DSPI Module Configuration Register #define SPI_MCR_MSTR ((uint32_t)0x80000000) // Master/Slave Mode Select #define SPI_MCR_CONT_SCKE ((uint32_t)0x40000000) // #define SPI_MCR_DCONF(n) (((n) & 3) << 28) // #define SPI_MCR_FRZ ((uint32_t)0x08000000) // #define SPI_MCR_MTFE ((uint32_t)0x04000000) // #define SPI_MCR_ROOE ((uint32_t)0x01000000) // #define SPI_MCR_PCSIS(n) (((n) & 0x1F) << 16) // #define SPI_MCR_DOZE ((uint32_t)0x00008000) // #define SPI_MCR_MDIS ((uint32_t)0x00004000) // #define SPI_MCR_DIS_TXF ((uint32_t)0x00002000) // #define SPI_MCR_DIS_RXF ((uint32_t)0x00001000) // #define SPI_MCR_CLR_TXF ((uint32_t)0x00000800) // #define SPI_MCR_CLR_RXF ((uint32_t)0x00000400) // #define SPI_MCR_SMPL_PT(n) (((n) & 3) << 8) // #define SPI_MCR_HALT ((uint32_t)0x00000001) // #define SPI0_TCR (KINETISK_SPI0.TCR) // DSPI Transfer Count Register #define SPI0_CTAR0 (KINETISK_SPI0.CTAR0) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI_CTAR_DBR ((uint32_t)0x80000000) // Double Baud Rate #define SPI_CTAR_FMSZ(n) (((n) & 15) << 27) // Frame Size (+1) #define SPI_CTAR_CPOL ((uint32_t)0x04000000) // Clock Polarity #define SPI_CTAR_CPHA ((uint32_t)0x02000000) // Clock Phase #define SPI_CTAR_LSBFE ((uint32_t)0x01000000) // LSB First #define SPI_CTAR_PCSSCK(n) (((n) & 3) << 22) // PCS to SCK Delay Prescaler #define SPI_CTAR_PASC(n) (((n) & 3) << 20) // After SCK Delay Prescaler #define SPI_CTAR_PDT(n) (((n) & 3) << 18) // Delay after Transfer Prescaler #define SPI_CTAR_PBR(n) (((n) & 3) << 16) // Baud Rate Prescaler #define SPI_CTAR_CSSCK(n) (((n) & 15) << 12) // PCS to SCK Delay Scaler #define SPI_CTAR_ASC(n) (((n) & 15) << 8) // After SCK Delay Scaler #define SPI_CTAR_DT(n) (((n) & 15) << 4) // Delay After Transfer Scaler #define SPI_CTAR_BR(n) (((n) & 15) << 0) // Baud Rate Scaler #define SPI0_CTAR0_SLAVE (KINETISK_SPI0.CTAR0) // DSPI Clock and Transfer Attributes Register, In Slave Mode #define SPI0_CTAR1 (KINETISK_SPI0.CTAR1) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI0_SR (KINETISK_SPI0.SR) // DSPI Status Register #define SPI_SR_TCF ((uint32_t)0x80000000) // Transfer Complete Flag #define SPI_SR_TXRXS ((uint32_t)0x40000000) // TX and RX Status #define SPI_SR_EOQF ((uint32_t)0x10000000) // End of Queue Flag #define SPI_SR_TFUF ((uint32_t)0x08000000) // Transmit FIFO Underflow Flag #define SPI_SR_TFFF ((uint32_t)0x02000000) // Transmit FIFO Fill Flag #define SPI_SR_RFOF ((uint32_t)0x00080000) // Receive FIFO Overflow Flag #define SPI_SR_RFDF ((uint32_t)0x00020000) // Receive FIFO Drain Flag #define SPI0_RSER (KINETISK_SPI0.RSER) // DSPI DMA/Interrupt Request Select and Enable Register #define SPI_RSER_TCF_RE ((uint32_t)0x80000000) // Transmission Complete Request Enable #define SPI_RSER_EOQF_RE ((uint32_t)0x10000000) // DSPI Finished Request Request Enable #define SPI_RSER_TFUF_RE ((uint32_t)0x08000000) // Transmit FIFO Underflow Request Enable #define SPI_RSER_TFFF_RE ((uint32_t)0x02000000) // Transmit FIFO Fill Request Enable #define SPI_RSER_TFFF_DIRS ((uint32_t)0x01000000) // Transmit FIFO FIll Dma or Interrupt Request Select #define SPI_RSER_RFOF_RE ((uint32_t)0x00080000) // Receive FIFO Overflow Request Enable #define SPI_RSER_RFDF_RE ((uint32_t)0x00020000) // Receive FIFO Drain Request Enable #define SPI_RSER_RFDF_DIRS ((uint32_t)0x00010000) // Receive FIFO Drain DMA or Interrupt Request Select #define SPI0_PUSHR (KINETISK_SPI0.PUSHR) // DSPI PUSH TX FIFO Register In Master Mode #define SPI_PUSHR_CONT ((uint32_t)0x80000000) // #define SPI_PUSHR_CTAS(n) (((n) & 7) << 28) // #define SPI_PUSHR_EOQ ((uint32_t)0x08000000) // #define SPI_PUSHR_CTCNT ((uint32_t)0x04000000) // #define SPI_PUSHR_PCS(n) (((n) & 31) << 16) // #define SPI0_PUSHR_SLAVE (KINETISK_SPI0.PUSHR) // DSPI PUSH TX FIFO Register In Slave Mode #define SPI0_POPR (KINETISK_SPI0.POPR) // DSPI POP RX FIFO Register #define SPI0_TXFR0 (KINETISK_SPI0.TXFR[0]) // DSPI Transmit FIFO Registers #define SPI0_TXFR1 (KINETISK_SPI0.TXFR[1]) // DSPI Transmit FIFO Registers #define SPI0_TXFR2 (KINETISK_SPI0.TXFR[2]) // DSPI Transmit FIFO Registers #define SPI0_TXFR3 (KINETISK_SPI0.TXFR[3]) // DSPI Transmit FIFO Registers #define SPI0_RXFR0 (KINETISK_SPI0.RXFR[0]) // DSPI Receive FIFO Registers #define SPI0_RXFR1 (KINETISK_SPI0.RXFR[1]) // DSPI Receive FIFO Registers #define SPI0_RXFR2 (KINETISK_SPI0.RXFR[2]) // DSPI Receive FIFO Registers #define SPI0_RXFR3 (KINETISK_SPI0.RXFR[3]) // DSPI Receive FIFO Registers #if defined(__MK64FX512__) || defined(__MK66FX1M0__) #define KINETISK_SPI1 (*(KINETISK_SPI_t *)0x4002D000) #define SPI1_MCR (KINETISK_SPI1.MCR) // DSPI Module Configuration Register #define SPI1_TCR (KINETISK_SPI1.TCR) // DSPI Transfer Count Register #define SPI1_CTAR0 (KINETISK_SPI1.CTAR0) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI1_CTAR0_SLAVE (KINETISK_SPI1.CTAR0) // DSPI Clock and Transfer Attributes Register, In Slave Mode #define SPI1_CTAR1 (KINETISK_SPI1.CTAR1) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI1_SR (KINETISK_SPI1.SR) // DSPI Status Register #define SPI1_RSER (KINETISK_SPI1.RSER) // DSPI DMA/Interrupt Request Select and Enable Register #define SPI1_PUSHR (KINETISK_SPI1.PUSHR) // DSPI PUSH TX FIFO Register In Master Mode #define SPI1_PUSHR_SLAVE (KINETISK_SPI1.PUSHR) // DSPI PUSH TX FIFO Register In Slave Mode #define SPI1_POPR (KINETISK_SPI1.POPR) // DSPI POP RX FIFO Register #define SPI1_TXFR0 (KINETISK_SPI1.TXFR[0]) // DSPI Transmit FIFO Registers #define SPI1_TXFR1 (KINETISK_SPI1.TXFR[1]) // DSPI Transmit FIFO Registers #define SPI1_TXFR2 (KINETISK_SPI1.TXFR[2]) // DSPI Transmit FIFO Registers #define SPI1_TXFR3 (KINETISK_SPI1.TXFR[3]) // DSPI Transmit FIFO Registers #define SPI1_RXFR0 (KINETISK_SPI1.RXFR[0]) // DSPI Receive FIFO Registers #define SPI1_RXFR1 (KINETISK_SPI1.RXFR[1]) // DSPI Receive FIFO Registers #define SPI1_RXFR2 (KINETISK_SPI1.RXFR[2]) // DSPI Receive FIFO Registers #define SPI1_RXFR3 (KINETISK_SPI1.RXFR[3]) // DSPI Receive FIFO Registers #define KINETISK_SPI2 (*(KINETISK_SPI_t *)0x400AC000) #define SPI2_MCR (KINETISK_SPI2.MCR) // DSPI Module Configuration Register #define SPI2_TCR (KINETISK_SPI2.TCR) // DSPI Transfer Count Register #define SPI2_CTAR0 (KINETISK_SPI2.CTAR0) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI2_CTAR0_SLAVE (KINETISK_SPI2.CTAR0) // DSPI Clock and Transfer Attributes Register, In Slave Mode #define SPI2_CTAR1 (KINETISK_SPI2.CTAR1) // DSPI Clock and Transfer Attributes Register, In Master Mode #define SPI2_SR (KINETISK_SPI2.SR) // DSPI Status Register #define SPI2_RSER (KINETISK_SPI2.RSER) // DSPI DMA/Interrupt Request Select and Enable Register #define SPI2_PUSHR (KINETISK_SPI2.PUSHR) // DSPI PUSH TX FIFO Register In Master Mode #define SPI2_PUSHR_SLAVE (KINETISK_SPI2.PUSHR) // DSPI PUSH TX FIFO Register In Slave Mode #define SPI2_POPR (KINETISK_SPI2.POPR) // DSPI POP RX FIFO Register #define SPI2_TXFR0 (KINETISK_SPI2.TXFR[0]) // DSPI Transmit FIFO Registers #define SPI2_TXFR1 (KINETISK_SPI2.TXFR[1]) // DSPI Transmit FIFO Registers #define SPI2_TXFR2 (KINETISK_SPI2.TXFR[2]) // DSPI Transmit FIFO Registers #define SPI2_TXFR3 (KINETISK_SPI2.TXFR[3]) // DSPI Transmit FIFO Registers #define SPI2_RXFR0 (KINETISK_SPI2.RXFR[0]) // DSPI Receive FIFO Registers #define SPI2_RXFR1 (KINETISK_SPI2.RXFR[1]) // DSPI Receive FIFO Registers #define SPI2_RXFR2 (KINETISK_SPI2.RXFR[2]) // DSPI Receive FIFO Registers #define SPI2_RXFR3 (KINETISK_SPI2.RXFR[3]) // DSPI Receive FIFO Registers #endif #elif defined(KINETISL) typedef struct { volatile uint8_t S; volatile uint8_t BR; volatile uint8_t C2; volatile uint8_t C1; volatile uint8_t ML; volatile uint8_t MH; volatile uint8_t DL; volatile uint8_t DH; volatile uint8_t unused1; volatile uint8_t unused2; volatile uint8_t CI; volatile uint8_t C3; } KINETISL_SPI_t; #define KINETISL_SPI0 (*(KINETISL_SPI_t *)0x40076000) #define KINETISL_SPI1 (*(KINETISL_SPI_t *)0x40077000) #define SPI0_S (KINETISL_SPI0.S) // Status #define SPI_S_SPRF ((uint8_t)0x80) // Read Buffer Full Flag #define SPI_S_SPMF ((uint8_t)0x40) // Match Flag #define SPI_S_SPTEF ((uint8_t)0x20) // Transmit Buffer Empty Flag #define SPI_S_MODF ((uint8_t)0x10) // Fault Flag #define SPI_S_RNFULLF ((uint8_t)0x08) // Receive FIFO nearly full flag #define SPI_S_TNEAREF ((uint8_t)0x04) // Transmit FIFO nearly empty flag #define SPI_S_TXFULLF ((uint8_t)0x02) // Transmit FIFO full flag #define SPI_S_RFIFOEF ((uint8_t)0x01) // Read FIFO empty flag #define SPI0_BR (KINETISL_SPI0.BR) // Baud Rate #define SPI_BR_SPPR(n) (((n) & 7) << 4) // Prescale = N+1 #define SPI_BR_SPR(n) (((n) & 15) << 0) // Baud Rate Divisor = 2^(N+1) : 0-8 -> 2 to 512 #define SPI0_C2 (KINETISL_SPI0.C2) // Control Register 2 #define SPI_C2_SPMIE ((uint8_t)0x80) // Match Interrupt Enable #define SPI_C2_SPIMODE ((uint8_t)0x40) // 0 = 8 bit mode, 1 = 16 bit mode #define SPI_C2_TXDMAE ((uint8_t)0x20) // Transmit DMA enable #define SPI_C2_MODFEN ((uint8_t)0x10) // Master Mode-Fault Function Enable #define SPI_C2_BIDIROE ((uint8_t)0x08) // Bidirectional Mode Output Enable #define SPI_C2_RXDMAE ((uint8_t)0x04) // Receive DMA enable #define SPI_C2_SPISWAI ((uint8_t)0x02) // SPI Stop in Wait Mode #define SPI_C2_SPC0 ((uint8_t)0x01) // SPI Pin Control, 0=normal, 1=single bidirectional #define SPI0_C1 (KINETISL_SPI0.C1) // Control Register 1 #define SPI_C1_SPIE ((uint8_t)0x80) // Interrupt Enable #define SPI_C1_SPE ((uint8_t)0x40) // SPI System Enable #define SPI_C1_SPTIE ((uint8_t)0x20) // Transmit Interrupt Enable #define SPI_C1_MSTR ((uint8_t)0x10) // Master/Slave Mode: 0=slave, 1=master #define SPI_C1_CPOL ((uint8_t)0x08) // Clock Polarity #define SPI_C1_CPHA ((uint8_t)0x04) // Clock Phase #define SPI_C1_SSOE ((uint8_t)0x02) // Slave Select Output Enable #define SPI_C1_LSBFE ((uint8_t)0x01) // LSB First: 0=MSB First, 1=LSB First #define SPI0_ML (KINETISL_SPI0.ML) // Match Low #define SPI0_MH (KINETISL_SPI0.MH) // Match High #define SPI0_DL (KINETISL_SPI0.DL) // Data Low #define SPI0_DH (KINETISL_SPI0.DH) // Data High #define SPI0_CI (KINETISL_SPI0.CI) // Clear Interrupt #define SPI_CI_TXFERR ((uint8_t)0x80) // Transmit FIFO error flag #define SPI_CI_RXFERR ((uint8_t)0x40) // Receive FIFO error flag #define SPI_CI_TXFOF ((uint8_t)0x20) // Transmit FIFO overflow flag #define SPI_CI_RXFOF ((uint8_t)0x10) // Receive FIFO overflow flag #define SPI_CI_TNEAREFCI ((uint8_t)0x08) // Transmit FIFO nearly empty flag clear interrupt #define SPI_CI_RNFULLFCI ((uint8_t)0x04) // Receive FIFO nearly full flag clear interrupt #define SPI_CI_SPTEFCI ((uint8_t)0x02) // Transmit FIFO empty flag clear interrupt #define SPI_CI_SPRFCI ((uint8_t)0x01) // Receive FIFO full flag clear interrupt #define SPI0_C3 (KINETISL_SPI0.C3) // Control Register 3 #define SPI_C3_TNEAREF_MARK ((uint8_t)0x20) // Transmit FIFO nearly empty watermark #define SPI_C3_RNFULLF_MARK ((uint8_t)0x10) // Receive FIFO nearly full watermark #define SPI_C3_INTCLR ((uint8_t)0x08) // Interrupt clearing mechanism select #define SPI_C3_TNEARIEN ((uint8_t)0x04) // Transmit FIFO nearly empty interrupt enable #define SPI_C3_RNFULLIEN ((uint8_t)0x02) // Receive FIFO nearly full interrupt enable #define SPI_C3_FIFOMODE ((uint8_t)0x01) // FIFO mode enable #define SPI1_S (KINETISL_SPI1.S) // Status #define SPI1_BR (KINETISL_SPI1.BR) // Baud Rate #define SPI1_C2 (KINETISL_SPI1.C2) // Control Register 2 #define SPI1_C1 (KINETISL_SPI1.C1) // Control Register 1 #define SPI1_ML (KINETISL_SPI1.ML) // Match Low #define SPI1_MH (KINETISL_SPI1.MH) // Match High #define SPI1_DL (KINETISL_SPI1.DL) // Data Low #define SPI1_DH (KINETISL_SPI1.DH) // Data High #define SPI1_CI (KINETISL_SPI1.CI) // Dlear Interrupt #define SPI1_C3 (KINETISL_SPI1.C3) // Control Register 3 #endif // Inter-Integrated Circuit (I2C) typedef struct { volatile uint8_t A1; volatile uint8_t F; volatile uint8_t C1; volatile uint8_t S; volatile uint8_t D; volatile uint8_t C2; volatile uint8_t FLT; volatile uint8_t RA; volatile uint8_t SMB; volatile uint8_t A2; volatile uint8_t SLTH; volatile uint8_t SLTL; } KINETIS_I2C_t; #define KINETIS_I2C0 (*(KINETIS_I2C_t *)0x40066000) #define KINETIS_I2C1 (*(KINETIS_I2C_t *)0x40067000) #define KINETIS_I2C2 (*(KINETIS_I2C_t *)0x400E6000) #define KINETIS_I2C3 (*(KINETIS_I2C_t *)0x400E7000) #define I2C0_A1 (KINETIS_I2C0.A1) // I2C Address Register 1 #define I2C0_F (KINETIS_I2C0.F) // I2C Frequency Divider register #define I2C_F_DIV20 ((uint8_t)0x00) #define I2C_F_DIV22 ((uint8_t)0x01) #define I2C_F_DIV24 ((uint8_t)0x02) #define I2C_F_DIV26 ((uint8_t)0x03) #define I2C_F_DIV28 ((uint8_t)0x04) #define I2C_F_DIV30 ((uint8_t)0x05) #define I2C_F_DIV32 ((uint8_t)0x09) #define I2C_F_DIV34 ((uint8_t)0x06) #define I2C_F_DIV36 ((uint8_t)0x0A) #define I2C_F_DIV40 ((uint8_t)0x07) #define I2C_F_DIV44 ((uint8_t)0x0C) #define I2C_F_DIV48 ((uint8_t)0x0D) #define I2C_F_DIV56 ((uint8_t)0x0E) #define I2C_F_DIV64 ((uint8_t)0x12) #define I2C_F_DIV68 ((uint8_t)0x0F) #define I2C_F_DIV72 ((uint8_t)0x13) #define I2C_F_DIV80 ((uint8_t)0x14) #define I2C_F_DIV88 ((uint8_t)0x15) #define I2C_F_DIV96 ((uint8_t)0x19) #define I2C_F_DIV104 ((uint8_t)0x16) #define I2C_F_DIV112 ((uint8_t)0x1A) #define I2C_F_DIV128 ((uint8_t)0x17) #define I2C_F_DIV144 ((uint8_t)0x1C) #define I2C_F_DIV160 ((uint8_t)0x1D) #define I2C_F_DIV192 ((uint8_t)0x1E) #define I2C_F_DIV224 ((uint8_t)0x22) #define I2C_F_DIV240 ((uint8_t)0x1F) #define I2C_F_DIV256 ((uint8_t)0x23) #define I2C_F_DIV288 ((uint8_t)0x24) #define I2C_F_DIV320 ((uint8_t)0x25) #define I2C_F_DIV384 ((uint8_t)0x26) #define I2C_F_DIV480 ((uint8_t)0x27) #define I2C_F_DIV448 ((uint8_t)0x2A) #define I2C_F_DIV512 ((uint8_t)0x2B) #define I2C_F_DIV576 ((uint8_t)0x2C) #define I2C_F_DIV640 ((uint8_t)0x2D) #define I2C_F_DIV768 ((uint8_t)0x2E) #define I2C_F_DIV896 ((uint8_t)0x32) #define I2C_F_DIV960 ((uint8_t)0x2F) #define I2C_F_DIV1024 ((uint8_t)0x33) #define I2C_F_DIV1152 ((uint8_t)0x34) #define I2C_F_DIV1280 ((uint8_t)0x35) #define I2C_F_DIV1536 ((uint8_t)0x36) #define I2C_F_DIV1920 ((uint8_t)0x37) #define I2C_F_DIV1792 ((uint8_t)0x3A) #define I2C_F_DIV2048 ((uint8_t)0x3B) #define I2C_F_DIV2304 ((uint8_t)0x3C) #define I2C_F_DIV2560 ((uint8_t)0x3D) #define I2C_F_DIV3072 ((uint8_t)0x3E) #define I2C_F_DIV3840 ((uint8_t)0x3F) //#define I2C_F_DIV28 ((uint8_t)0x08) //#define I2C_F_DIV40 ((uint8_t)0x0B) //#define I2C_F_DIV48 ((uint8_t)0x10) //#define I2C_F_DIV56 ((uint8_t)0x11) //#define I2C_F_DIV80 ((uint8_t)0x18) //#define I2C_F_DIV128 ((uint8_t)0x1B) //#define I2C_F_DIV160 ((uint8_t)0x20) //#define I2C_F_DIV192 ((uint8_t)0x21) //#define I2C_F_DIV320 ((uint8_t)0x28) //#define I2C_F_DIV384 ((uint8_t)0x29) //#define I2C_F_DIV640 ((uint8_t)0x30) //#define I2C_F_DIV768 ((uint8_t)0x31) //#define I2C_F_DIV1280 ((uint8_t)0x38) //#define I2C_F_DIV1536 ((uint8_t)0x39) #define I2C0_C1 (KINETIS_I2C0.C1) // I2C Control Register 1 #define I2C_C1_IICEN ((uint8_t)0x80) // I2C Enable #define I2C_C1_IICIE ((uint8_t)0x40) // I2C Interrupt Enable #define I2C_C1_MST ((uint8_t)0x20) // Master Mode Select #define I2C_C1_TX ((uint8_t)0x10) // Transmit Mode Select #define I2C_C1_TXAK ((uint8_t)0x08) // Transmit Acknowledge Enable #define I2C_C1_RSTA ((uint8_t)0x04) // Repeat START #define I2C_C1_WUEN ((uint8_t)0x02) // Wakeup Enable #define I2C_C1_DMAEN ((uint8_t)0x01) // DMA Enable #define I2C0_S (KINETIS_I2C0.S) // I2C Status register #define I2C_S_TCF ((uint8_t)0x80) // Transfer Complete Flag #define I2C_S_IAAS ((uint8_t)0x40) // Addressed As A Slave #define I2C_S_BUSY ((uint8_t)0x20) // Bus Busy #define I2C_S_ARBL ((uint8_t)0x10) // Arbitration Lost #define I2C_S_RAM ((uint8_t)0x08) // Range Address Match #define I2C_S_SRW ((uint8_t)0x04) // Slave Read/Write #define I2C_S_IICIF ((uint8_t)0x02) // Interrupt Flag #define I2C_S_RXAK ((uint8_t)0x01) // Receive Acknowledge #define I2C0_D (KINETIS_I2C0.D) // I2C Data I/O register #define I2C0_C2 (KINETIS_I2C0.C2) // I2C Control Register 2 #define I2C_C2_GCAEN ((uint8_t)0x80) // General Call Address Enable #define I2C_C2_ADEXT ((uint8_t)0x40) // Address Extension #define I2C_C2_HDRS ((uint8_t)0x20) // High Drive Select #define I2C_C2_SBRC ((uint8_t)0x10) // Slave Baud Rate Control #define I2C_C2_RMEN ((uint8_t)0x08) // Range Address Matching Enable #define I2C_C2_AD(n) ((n) & 7) // Slave Address, upper 3 bits #define I2C0_FLT (KINETIS_I2C0.FLT) // I2C Programmable Input Glitch Filter register #define I2C_FLT_SHEN ((uint8_t)0x80) // Stop Hold Enable #define I2C_FLT_STOPF ((uint8_t)0x40) // Stop Detect Flag #define I2C_FLT_STOPIE ((uint8_t)0x20) // Stop Interrupt Enable #define I2C_FLT_FTL(n) ((n) & 0x1F) // Programmable Filter Factor #define I2C0_RA (KINETIS_I2C0.RA) // I2C Range Address register #define I2C0_SMB (KINETIS_I2C0.SMB) // I2C SMBus Control and Status register #define I2C0_A2 (KINETIS_I2C0.A2) // I2C Address Register 2 #define I2C0_SLTH (KINETIS_I2C0.SLTH) // I2C SCL Low Timeout Register High #define I2C0_SLTL (KINETIS_I2C0.SLTL) // I2C SCL Low Timeout Register Low #define I2C1_A1 (KINETIS_I2C1.A1) // I2C Address Register 1 #define I2C1_F (KINETIS_I2C1.F) // I2C Frequency Divider register #define I2C1_C1 (KINETIS_I2C1.C1) // I2C Control Register 1 #define I2C1_S (KINETIS_I2C1.S) // I2C Status register #define I2C1_D (KINETIS_I2C1.D) // I2C Data I/O register #define I2C1_C2 (KINETIS_I2C1.C2) // I2C Control Register 2 #define I2C1_FLT (KINETIS_I2C1.FLT) // I2C Programmable Input Glitch Filter register #define I2C1_RA (KINETIS_I2C1.RA) // I2C Range Address register #define I2C1_SMB (KINETIS_I2C1.SMB) // I2C SMBus Control and Status register #define I2C1_A2 (KINETIS_I2C1.A2) // I2C Address Register 2 #define I2C1_SLTH (KINETIS_I2C1.SLTH) // I2C SCL Low Timeout Register High #define I2C1_SLTL (KINETIS_I2C1.SLTL) // I2C SCL Low Timeout Register Low #define I2C2_A1 (KINETIS_I2C2.A1) // I2C Address Register 1 #define I2C2_F (KINETIS_I2C2.F) // I2C Frequency Divider register #define I2C2_C1 (KINETIS_I2C2.C1) // I2C Control Register 1 #define I2C2_S (KINETIS_I2C2.S) // I2C Status register #define I2C2_D (KINETIS_I2C2.D) // I2C Data I/O register #define I2C2_C2 (KINETIS_I2C2.C2) // I2C Control Register 2 #define I2C2_FLT (KINETIS_I2C2.FLT) // I2C Programmable Input Glitch Filter register #define I2C2_RA (KINETIS_I2C2.RA) // I2C Range Address register #define I2C2_SMB (KINETIS_I2C2.SMB) // I2C SMBus Control and Status register #define I2C2_A2 (KINETIS_I2C2.A2) // I2C Address Register 2 #define I2C2_SLTH (KINETIS_I2C2.SLTH) // I2C SCL Low Timeout Register High #define I2C2_SLTL (KINETIS_I2C2.SLTL) // I2C SCL Low Timeout Register Low #define I2C3_A1 (KINETIS_I2C3.A1) // I2C Address Register 1 #define I2C3_F (KINETIS_I2C3.F) // I2C Frequency Divider register #define I2C3_C1 (KINETIS_I2C3.C1) // I2C Control Register 1 #define I2C3_S (KINETIS_I2C3.S) // I2C Status register #define I2C3_D (KINETIS_I2C3.D) // I2C Data I/O register #define I2C3_C2 (KINETIS_I2C3.C2) // I2C Control Register 2 #define I2C3_FLT (KINETIS_I2C3.FLT) // I2C Programmable Input Glitch Filter register #define I2C3_RA (KINETIS_I2C3.RA) // I2C Range Address register #define I2C3_SMB (KINETIS_I2C3.SMB) // I2C SMBus Control and Status register #define I2C3_A2 (KINETIS_I2C3.A2) // I2C Address Register 2 #define I2C3_SLTH (KINETIS_I2C3.SLTH) // I2C SCL Low Timeout Register High #define I2C3_SLTL (KINETIS_I2C3.SLTL) // I2C SCL Low Timeout Register Low // Universal Asynchronous Receiver/Transmitter (UART) typedef struct __attribute__((packed)) { volatile uint8_t BDH; volatile uint8_t BDL; volatile uint8_t C1; volatile uint8_t C2; volatile uint8_t S1; volatile uint8_t S2; volatile uint8_t C3; volatile uint8_t D; volatile uint8_t MA1; volatile uint8_t MA2; volatile uint8_t C4; volatile uint8_t C5; volatile uint8_t ED; volatile uint8_t MODEM; volatile uint8_t IR; volatile uint8_t unused1; volatile uint8_t PFIFO; volatile uint8_t CFIFO; volatile uint8_t SFIFO; volatile uint8_t TWFIFO; volatile uint8_t TCFIFO; volatile uint8_t RWFIFO; volatile uint8_t RCFIFO; volatile uint8_t unused2; volatile uint8_t C7816; volatile uint8_t IE7816; volatile uint8_t IS7816; union { volatile uint8_t WP7816T0; volatile uint8_t WP7816T1; }; volatile uint8_t WN7816; volatile uint8_t WF7816; volatile uint8_t ET7816; volatile uint8_t TL7816; volatile uint8_t unused3; volatile uint8_t C6; volatile uint8_t PCTH; volatile uint8_t PCTL; volatile uint8_t B1T; volatile uint8_t SDTH; volatile uint8_t SDTL; volatile uint8_t PRE; volatile uint8_t TPL; volatile uint8_t IE; volatile uint8_t WB; volatile uint8_t S3; volatile uint8_t S4; volatile uint8_t RPL; volatile uint8_t RPREL; volatile uint8_t CPW; volatile uint8_t RIDT; volatile uint8_t TIDT; } KINETISK_UART_t; #define KINETISK_UART0 (*(KINETISK_UART_t *)0x4006A000) #define UART0_BDH (KINETISK_UART0.BDH) // UART Baud Rate Registers: High #define UART_BDH_SBNS 0x20 // UART Stop Bit Number Select (TLC T3.5 T3.6) #define UART0_BDL (KINETISK_UART0.BDL) // UART Baud Rate Registers: Low #define UART0_C1 (KINETISK_UART0.C1) // UART Control Register 1 #define UART_C1_LOOPS 0x80 // When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input #define UART_C1_UARTSWAI 0x40 // UART Stops in Wait Mode #define UART_C1_RSRC 0x20 // When LOOPS is set, the RSRC field determines the source for the receiver shift register input #define UART_C1_M 0x10 // 9-bit or 8-bit Mode Select #define UART_C1_WAKE 0x08 // Determines which condition wakes the UART #define UART_C1_ILT 0x04 // Idle Line Type Select #define UART_C1_PE 0x02 // Parity Enable #define UART_C1_PT 0x01 // Parity Type, 0=even, 1=odd #define UART0_C2 (KINETISK_UART0.C2) // UART Control Register 2 #define UART_C2_TIE 0x80 // Transmitter Interrupt or DMA Transfer Enable. #define UART_C2_TCIE 0x40 // Transmission Complete Interrupt Enable #define UART_C2_RIE 0x20 // Receiver Full Interrupt or DMA Transfer Enable #define UART_C2_ILIE 0x10 // Idle Line Interrupt Enable #define UART_C2_TE 0x08 // Transmitter Enable #define UART_C2_RE 0x04 // Receiver Enable #define UART_C2_RWU 0x02 // Receiver Wakeup Control #define UART_C2_SBK 0x01 // Send Break #define UART0_S1 (KINETISK_UART0.S1) // UART Status Register 1 #define UART_S1_TDRE 0x80 // Transmit Data Register Empty Flag #define UART_S1_TC 0x40 // Transmit Complete Flag #define UART_S1_RDRF 0x20 // Receive Data Register Full Flag #define UART_S1_IDLE 0x10 // Idle Line Flag #define UART_S1_OR 0x08 // Receiver Overrun Flag #define UART_S1_NF 0x04 // Noise Flag #define UART_S1_FE 0x02 // Framing Error Flag #define UART_S1_PF 0x01 // Parity Error Flag #define UART0_S2 (KINETISK_UART0.S2) // UART Status Register 2 #define UART_S2_LBKDIF 0x80 // LIN Break Detect Interrupt Flag #define UART_S2_RXEDGIF 0x40 // RxD Pin Active Edge Interrupt Flag #define UART_S2_MSBF 0x20 // Most Significant Bit First #define UART_S2_RXINV 0x10 // Receive Data Inversion #define UART_S2_RWUID 0x08 // Receive Wakeup Idle Detect #define UART_S2_BRK13 0x04 // Break Transmit Character Length #define UART_S2_LBKDE 0x02 // LIN Break Detection Enable #define UART_S2_RAF 0x01 // Receiver Active Flag #define UART0_C3 (KINETISK_UART0.C3) // UART Control Register 3 #define UART_C3_R8 0x80 // Received Bit 8 #define UART_C3_T8 0x40 // Transmit Bit 8 #define UART_C3_TXDIR 0x20 // TX Pin Direction in Single-Wire mode #define UART_C3_TXINV 0x10 // Transmit Data Inversion #define UART_C3_ORIE 0x08 // Overrun Error Interrupt Enable #define UART_C3_NEIE 0x04 // Noise Error Interrupt Enable #define UART_C3_FEIE 0x02 // Framing Error Interrupt Enable #define UART_C3_PEIE 0x01 // Parity Error Interrupt Enable #define UART0_D (KINETISK_UART0.D) // UART Data Register #define UART0_MA1 (KINETISK_UART0.MA1) // UART Match Address Registers 1 #define UART0_MA2 (KINETISK_UART0.MA2) // UART Match Address Registers 2 #define UART0_C4 (KINETISK_UART0.C4) // UART Control Register 4 #define UART_C4_MAEN1 0x80 // Match Address Mode Enable 1 #define UART_C4_MAEN2 0x40 // Match Address Mode Enable 2 #define UART_C4_M10 0x20 // 10-bit Mode select #define UART_C4_BRFA(n) ((n) & 31) // Baud Rate Fine Adjust #define UART0_C5 (KINETISK_UART0.C5) // UART Control Register 5 #define UART_C5_TDMAS 0x80 // Transmitter DMA Select #define UART_C5_RDMAS 0x20 // Receiver Full DMA Select #define UART0_ED (KINETISK_UART0.ED) // UART Extended Data Register #define UART_ED_NOISY 0x80 // data received with noise #define UART_ED_PARITYE 0x40 // data received with a parity error #define UART0_MODEM (KINETISK_UART0.MODEM) // UART Modem Register #define UART_MODEM_RXRTSE 0x08 // Receiver request-to-send enable #define UART_MODEM_TXRTSPOL 0x04 // Transmitter request-to-send polarity #define UART_MODEM_TXRTSE 0x02 // Transmitter request-to-send enable #define UART_MODEM_TXCTSE 0x01 // Transmitter clear-to-send enable #define UART0_IR (KINETISK_UART0.IR) // UART Infrared Register #define UART_IR_IREN 0x04 // Infrared enable #define UART_IR_TNP(n) ((n) & 3) // TX narrow pulse, 0=3/16, 1=1/16, 2=1/32, 3=1/4 #define UART0_PFIFO (KINETISK_UART0.PFIFO) // UART FIFO Parameters #define UART_PFIFO_TXFE 0x80 // Transmit FIFO Enable #define UART_PFIFO_TXFIFOSIZE(n) (((n) & 7) << 4) // Transmit FIFO Size, 0=1, 1=4, 2=8, 3=16, 4=32, 5=64, 6=128 #define UART_PFIFO_RXFE 0x08 // Receive FIFO Enable #define UART_PFIFO_RXFIFOSIZE(n) (((n) & 7) << 0) // Transmit FIFO Size, 0=1, 1=4, 2=8, 3=16, 4=32, 5=64, 6=128 #define UART0_CFIFO (KINETISK_UART0.CFIFO) // UART FIFO Control Register #define UART_CFIFO_TXFLUSH 0x80 // Transmit FIFO/Buffer Flush #define UART_CFIFO_RXFLUSH 0x40 // Receive FIFO/Buffer Flush #define UART_CFIFO_RXOFE 0x04 // Receive FIFO Overflow Interrupt Enable #define UART_CFIFO_TXOFE 0x02 // Transmit FIFO Overflow Interrupt Enable #define UART_CFIFO_RXUFE 0x01 // Receive FIFO Underflow Interrupt Enable #define UART0_SFIFO (KINETISK_UART0.SFIFO) // UART FIFO Status Register #define UART_SFIFO_TXEMPT 0x80 // Transmit Buffer/FIFO Empty #define UART_SFIFO_RXEMPT 0x40 // Receive Buffer/FIFO Empty #define UART_SFIFO_RXOF 0x04 // Receiver Buffer Overflow Flag #define UART_SFIFO_TXOF 0x02 // Transmitter Buffer Overflow Flag #define UART_SFIFO_RXUF 0x01 // Receiver Buffer Underflow Flag #define UART0_TWFIFO (KINETISK_UART0.TWFIFO) // UART FIFO Transmit Watermark #define UART0_TCFIFO (KINETISK_UART0.TCFIFO) // UART FIFO Transmit Count #define UART0_RWFIFO (KINETISK_UART0.RWFIFO) // UART FIFO Receive Watermark #define UART0_RCFIFO (KINETISK_UART0.RCFIFO) // UART FIFO Receive Count #define UART0_C7816 (KINETISK_UART0.C7816) // UART 7816 Control Register #define UART_C7816_ONACK 0x10 // Generate NACK on Overflow #define UART_C7816_ANACK 0x08 // Generate NACK on Error #define UART_C7816_INIT 0x04 // Detect Initial Character #define UART_C7816_TTYPE 0x02 // Transfer Type #define UART_C7816_ISO_7816E 0x01 // ISO-7816 Functionality Enabled #define UART0_IE7816 (KINETISK_UART0.IE7816) // UART 7816 Interrupt Enable Register #define UART_IE7816_WTE 0x80 // Wait Timer Interrupt Enable #define UART_IE7816_CWTE 0x40 // Character Wait Timer Interrupt Enable #define UART_IE7816_BWTE 0x20 // Block Wait Timer Interrupt Enable #define UART_IE7816_INITDE 0x10 // Initial Character Detected Interrupt Enable #define UART_IE7816_GTVE 0x04 // Guard Timer Violated Interrupt Enable #define UART_IE7816_TXTE 0x02 // Transmit Threshold Exceeded Interrupt Enable #define UART_IE7816_RXTE 0x01 // Receive Threshold Exceeded Interrupt Enable #define UART0_IS7816 (KINETISK_UART0.IS7816) // UART 7816 Interrupt Status Register #define UART_IS7816_WT 0x80 // Wait Timer Interrupt #define UART_IS7816_CWT 0x40 // Character Wait Timer Interrupt #define UART_IS7816_BWT 0x20 // Block Wait Timer Interrupt #define UART_IS7816_INITD 0x10 // Initial Character Detected Interrupt #define UART_IS7816_GTV 0x04 // Guard Timer Violated Interrupt #define UART_IS7816_TXT 0x02 // Transmit Threshold Exceeded Interrupt #define UART_IS7816_RXT 0x01 // Receive Threshold Exceeded Interrupt #define UART0_WP7816T0 (KINETISK_UART0.WP7816T0) // UART 7816 Wait Parameter Register #define UART0_WP7816T1 (KINETISK_UART0.WP7816T1) // UART 7816 Wait Parameter Register #define UART_WP7816T1_CWI(n) (((n) & 15) << 4) // Character Wait Time Integer (C7816[TTYPE] = 1) #define UART_WP7816T1_BWI(n) (((n) & 15) << 0) // Block Wait Time Integer(C7816[TTYPE] = 1) #define UART0_WN7816 (KINETISK_UART0.WN7816) // UART 7816 Wait N Register #define UART0_WF7816 (KINETISK_UART0.WF7816) // UART 7816 Wait FD Register #define UART0_ET7816 (KINETISK_UART0.ET7816) // UART 7816 Error Threshold Register #define UART_ET7816_TXTHRESHOLD(n) (((n) & 15) << 4) // Transmit NACK Threshold #define UART_ET7816_RXTHRESHOLD(n) (((n) & 15) << 0) // Receive NACK Threshold #define UART0_TL7816 (KINETISK_UART0.TL7816) // UART 7816 Transmit Length Register #define UART0_C6 (KINETISK_UART0.C6) // UART CEA709.1-B Control Register 6 #define UART_C6_EN709 0x80 // Enables the CEA709.1-B feature. #define UART_C6_TX709 0x40 // Starts CEA709.1-B transmission. #define UART_C6_CE 0x20 // Collision Enable #define UART_C6_CP 0x10 // Collision Signal Polarity #define UART0_PCTH (KINETISK_UART0.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High #define UART0_PCTL (KINETISK_UART0.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low #define UART0_B1T (KINETISK_UART0.B1T) // UART CEA709.1-B Beta1 Timer #define UART0_SDTH (KINETISK_UART0.SDTH) // UART CEA709.1-B Secondary Delay Timer High #define UART0_SDTL (KINETISK_UART0.SDTL) // UART CEA709.1-B Secondary Delay Timer Low #define UART0_PRE (KINETISK_UART0.PRE) // UART CEA709.1-B Preamble #define UART0_TPL (KINETISK_UART0.TPL) // UART CEA709.1-B Transmit Packet Length #define UART0_IE (KINETISK_UART0.IE) // UART CEA709.1-B Interrupt Enable Register #define UART_IE_WBEIE 0x40 // WBASE Expired Interrupt Enable #define UART_IE_ISDIE 0x20 // Initial Sync Detection Interrupt Enable #define UART_IE_PRXIE 0x10 // Packet Received Interrupt Enable #define UART_IE_PTXIE 0x08 // Packet Transmitted Interrupt Enable #define UART_IE_PCTEIE 0x04 // Packet Cycle Timer Interrupt Enable #define UART_IE_PSIE 0x02 // Preamble Start Interrupt Enable #define UART_IE_TXFIE 0x01 // Transmission Fail Interrupt Enable #define UART0_WB (KINETISK_UART0.WB) // UART CEA709.1-B WBASE #define UART0_S3 (KINETISK_UART0.S3) // UART CEA709.1-B Status Register #define UART_S3_PEF 0x80 // Preamble Error Flag #define UART_S3_WBEF 0x40 // Wbase Expired Flag #define UART_S3_ISD 0x20 // Initial Sync Detect #define UART_S3_PRXF 0x10 // Packet Received Flag #define UART_S3_PTXF 0x08 // Packet Transmitted Flag #define UART_S3_PCTEF 0x04 // Packet Cycle Timer Expired Flag #define UART_S3_PSF 0x02 // Preamble Start Flag #define UART_S3_TXFF 0x01 // Transmission Fail Flag #define UART0_S4 (KINETISK_UART0.S4) // UART CEA709.1-B Status Register #define UART_S4_INITF 0x10 // Initial Synchronization Fail Flag #define UART_S4_CDET(n) (((n) & 3) << 2) // Indicates collision: 0=none, 1=preamble, 2=data, 3=line code violation #define UART_S4_ILCV 0x02 // Improper Line Code Violation #define UART_S4_FE 0x01 // Framing Error #define UART0_RPL (KINETISK_UART0.RPL) // UART CEA709.1-B Received Packet Length #define UART0_RPREL (KINETISK_UART0.RPREL) // UART CEA709.1-B Received Preamble Length #define UART0_CPW (KINETISK_UART0.CPW) // UART CEA709.1-B Collision Pulse Width #define UART0_RIDT (KINETISK_UART0.RIDT) // UART CEA709.1-B Receive Indeterminate Time #define UART0_TIDT (KINETISK_UART0.TIDT) // UART CEA709.1-B Transmit Indeterminate Time #define KINETISK_UART1 (*(KINETISK_UART_t *)0x4006B000) #define UART1_BDH (KINETISK_UART1.BDH) // UART Baud Rate Registers: High #define UART1_BDL (KINETISK_UART1.BDL) // UART Baud Rate Registers: Low #define UART1_C1 (KINETISK_UART1.C1) // UART Control Register 1 #define UART1_C2 (KINETISK_UART1.C2) // UART Control Register 2 #define UART1_S1 (KINETISK_UART1.S1) // UART Status Register 1 #define UART1_S2 (KINETISK_UART1.S2) // UART Status Register 2 #define UART1_C3 (KINETISK_UART1.C3) // UART Control Register 3 #define UART1_D (KINETISK_UART1.D) // UART Data Register #define UART1_MA1 (KINETISK_UART1.MA1) // UART Match Address Registers 1 #define UART1_MA2 (KINETISK_UART1.MA2) // UART Match Address Registers 2 #define UART1_C4 (KINETISK_UART1.C4) // UART Control Register 4 #define UART1_C5 (KINETISK_UART1.C5) // UART Control Register 5 #define UART1_ED (KINETISK_UART1.ED) // UART Extended Data Register #define UART1_MODEM (KINETISK_UART1.MODEM) // UART Modem Register #define UART1_IR (KINETISK_UART1.IR) // UART Infrared Register #define UART1_PFIFO (KINETISK_UART1.PFIFO) // UART FIFO Parameters #define UART1_CFIFO (KINETISK_UART1.CFIFO) // UART FIFO Control Register #define UART1_SFIFO (KINETISK_UART1.SFIFO) // UART FIFO Status Register #define UART1_TWFIFO (KINETISK_UART1.TWFIFO) // UART FIFO Transmit Watermark #define UART1_TCFIFO (KINETISK_UART1.TCFIFO) // UART FIFO Transmit Count #define UART1_RWFIFO (KINETISK_UART1.RWFIFO) // UART FIFO Receive Watermark #define UART1_RCFIFO (KINETISK_UART1.RCFIFO) // UART FIFO Receive Count #define UART1_C7816 (KINETISK_UART1.C7816) // UART 7816 Control Register #define UART1_IE7816 (KINETISK_UART1.IE7816) // UART 7816 Interrupt Enable Register #define UART1_IS7816 (KINETISK_UART1.IS7816) // UART 7816 Interrupt Status Register #define UART1_WP7816T0 (KINETISK_UART1.WP7816T0)// UART 7816 Wait Parameter Register #define UART1_WP7816T1 (KINETISK_UART1.WP7816T1)// UART 7816 Wait Parameter Register #define UART1_WN7816 (KINETISK_UART1.WN7816) // UART 7816 Wait N Register #define UART1_WF7816 (KINETISK_UART1.WF7816) // UART 7816 Wait FD Register #define UART1_ET7816 (KINETISK_UART1.ET7816) // UART 7816 Error Threshold Register #define UART1_TL7816 (KINETISK_UART1.TL7816) // UART 7816 Transmit Length Register #define UART1_C6 (KINETISK_UART1.C6) // UART CEA709.1-B Control Register 6 #define UART1_PCTH (KINETISK_UART1.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High #define UART1_PCTL (KINETISK_UART1.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low #define UART1_B1T (KINETISK_UART1.B1T) // UART CEA709.1-B Beta1 Timer #define UART1_SDTH (KINETISK_UART1.SDTH) // UART CEA709.1-B Secondary Delay Timer High #define UART1_SDTL (KINETISK_UART1.SDTL) // UART CEA709.1-B Secondary Delay Timer Low #define UART1_PRE (KINETISK_UART1.PRE) // UART CEA709.1-B Preamble #define UART1_TPL (KINETISK_UART1.TPL) // UART CEA709.1-B Transmit Packet Length #define UART1_IE (KINETISK_UART1.IE) // UART CEA709.1-B Interrupt Enable Register #define UART1_WB (KINETISK_UART1.WB) // UART CEA709.1-B WBASE #define UART1_S3 (KINETISK_UART1.S3) // UART CEA709.1-B Status Register #define UART1_S4 (KINETISK_UART1.S4) // UART CEA709.1-B Status Register #define UART1_RPL (KINETISK_UART1.RPL) // UART CEA709.1-B Received Packet Length #define UART1_RPREL (KINETISK_UART1.RPREL) // UART CEA709.1-B Received Preamble Length #define UART1_CPW (KINETISK_UART1.CPW) // UART CEA709.1-B Collision Pulse Width #define UART1_RIDT (KINETISK_UART1.RIDT) // UART CEA709.1-B Receive Indeterminate Time #define UART1_TIDT (KINETISK_UART1.TIDT) // UART CEA709.1-B Transmit Indeterminate Time #define KINETISK_UART2 (*(KINETISK_UART_t *)0x4006C000) #define UART2_BDH (KINETISK_UART2.BDH) // UART Baud Rate Registers: High #define UART2_BDL (KINETISK_UART2.BDL) // UART Baud Rate Registers: Low #define UART2_C1 (KINETISK_UART2.C1) // UART Control Register 1 #define UART2_C2 (KINETISK_UART2.C2) // UART Control Register 2 #define UART2_S1 (KINETISK_UART2.S1) // UART Status Register 1 #define UART2_S2 (KINETISK_UART2.S2) // UART Status Register 2 #define UART2_C3 (KINETISK_UART2.C3) // UART Control Register 3 #define UART2_D (KINETISK_UART2.D) // UART Data Register #define UART2_MA1 (KINETISK_UART2.MA1) // UART Match Address Registers 1 #define UART2_MA2 (KINETISK_UART2.MA2) // UART Match Address Registers 2 #define UART2_C4 (KINETISK_UART2.C4) // UART Control Register 4 #define UART2_C5 (KINETISK_UART2.C5) // UART Control Register 5 #define UART2_ED (KINETISK_UART2.ED) // UART Extended Data Register #define UART2_MODEM (KINETISK_UART2.MODEM) // UART Modem Register #define UART2_IR (KINETISK_UART2.IR) // UART Infrared Register #define UART2_PFIFO (KINETISK_UART2.PFIFO) // UART FIFO Parameters #define UART2_CFIFO (KINETISK_UART2.CFIFO) // UART FIFO Control Register #define UART2_SFIFO (KINETISK_UART2.SFIFO) // UART FIFO Status Register #define UART2_TWFIFO (KINETISK_UART2.TWFIFO) // UART FIFO Transmit Watermark #define UART2_TCFIFO (KINETISK_UART2.TCFIFO) // UART FIFO Transmit Count #define UART2_RWFIFO (KINETISK_UART2.RWFIFO) // UART FIFO Receive Watermark #define UART2_RCFIFO (KINETISK_UART2.RCFIFO) // UART FIFO Receive Count #define UART2_C7816 (KINETISK_UART2.C7816) // UART 7816 Control Register #define UART2_IE7816 (KINETISK_UART2.IE7816) // UART 7816 Interrupt Enable Register #define UART2_IS7816 (KINETISK_UART2.IS7816) // UART 7816 Interrupt Status Register #define UART2_WP7816T0 (KINETISK_UART2.WP7816T0)// UART 7816 Wait Parameter Register #define UART2_WP7816T1 (KINETISK_UART2.WP7816T1)// UART 7816 Wait Parameter Register #define UART2_WN7816 (KINETISK_UART2.WN7816) // UART 7816 Wait N Register #define UART2_WF7816 (KINETISK_UART2.WF7816) // UART 7816 Wait FD Register #define UART2_ET7816 (KINETISK_UART2.ET7816) // UART 7816 Error Threshold Register #define UART2_TL7816 (KINETISK_UART2.TL7816) // UART 7816 Transmit Length Register #define UART2_C6 (KINETISK_UART2.C6) // UART CEA709.1-B Control Register 6 #define UART2_PCTH (KINETISK_UART2.PCTH) // UART CEA709.1-B Packet Cycle Time Counter High #define UART2_PCTL (KINETISK_UART2.PCTL) // UART CEA709.1-B Packet Cycle Time Counter Low #define UART2_B1T (KINETISK_UART2.B1T) // UART CEA709.1-B Beta1 Timer #define UART2_SDTH (KINETISK_UART2.SDTH) // UART CEA709.1-B Secondary Delay Timer High #define UART2_SDTL (KINETISK_UART2.SDTL) // UART CEA709.1-B Secondary Delay Timer Low #define UART2_PRE (KINETISK_UART2.PRE) // UART CEA709.1-B Preamble #define UART2_TPL (KINETISK_UART2.TPL) // UART CEA709.1-B Transmit Packet Length #define UART2_IE (KINETISK_UART2.IE) // UART CEA709.1-B Interrupt Enable Register #define UART2_WB (KINETISK_UART2.WB) // UART CEA709.1-B WBASE #define UART2_S3 (KINETISK_UART2.S3) // UART CEA709.1-B Status Register #define UART2_S4 (KINETISK_UART2.S4) // UART CEA709.1-B Status Register #define UART2_RPL (KINETISK_UART2.RPL) // UART CEA709.1-B Received Packet Length #define UART2_RPREL (KINETISK_UART2.RPREL) // UART CEA709.1-B Received Preamble Length #define UART2_CPW (KINETISK_UART2.CPW) // UART CEA709.1-B Collision Pulse Width #define UART2_RIDT (KINETISK_UART2.RIDT) // UART CEA709.1-B Receive Indeterminate Time #define UART2_TIDT (KINETISK_UART2.TIDT) // UART CEA709.1-B Transmit Indeterminate Time #define KINETISK_UART3 (*(KINETISK_UART_t *)0x4006D000) #define UART3_BDH (KINETISK_UART3.BDH) // UART Baud Rate Registers: High #define UART3_BDL (KINETISK_UART3.BDL) // UART Baud Rate Registers: Low #define UART3_C1 (KINETISK_UART3.C1) // UART Control Register 1 #define UART3_C2 (KINETISK_UART3.C2) // UART Control Register 2 #define UART3_S1 (KINETISK_UART3.S1) // UART Status Register 1 #define UART3_S2 (KINETISK_UART3.S2) // UART Status Register 2 #define UART3_C3 (KINETISK_UART3.C3) // UART Control Register 3 #define UART3_D (KINETISK_UART3.D) // UART Data Register #define UART3_MA1 (KINETISK_UART3.MA1) // UART Match Address Registers 1 #define UART3_MA2 (KINETISK_UART3.MA2) // UART Match Address Registers 2 #define UART3_C4 (KINETISK_UART3.C4) // UART Control Register 4 #define UART3_C5 (KINETISK_UART3.C5) // UART Control Register 5 #define UART3_ED (KINETISK_UART3.ED) // UART Extended Data Register #define UART3_MODEM (KINETISK_UART3.MODEM) // UART Modem Register #define UART3_IR (KINETISK_UART3.IR) // UART Infrared Register #define UART3_PFIFO (KINETISK_UART3.PFIFO) // UART FIFO Parameters #define UART3_CFIFO (KINETISK_UART3.CFIFO) // UART FIFO Control Register #define UART3_SFIFO (KINETISK_UART3.SFIFO) // UART FIFO Status Register #define UART3_TWFIFO (KINETISK_UART3.TWFIFO) // UART FIFO Transmit Watermark #define UART3_TCFIFO (KINETISK_UART3.TCFIFO) // UART FIFO Transmit Count #define UART3_RWFIFO (KINETISK_UART3.RWFIFO) // UART FIFO Receive Watermark #define UART3_RCFIFO (KINETISK_UART3.RCFIFO) // UART FIFO Receive Count #define UART3_C7816 (KINETISK_UART3.C7816) // UART 7816 Control Register #define UART3_IE7816 (KINETISK_UART3.IE7816) // UART 7816 Interrupt Enable Register #define UART3_IS7816 (KINETISK_UART3.IS7816) // UART 7816 Interrupt Status Register #define UART3_WP7816T0 (KINETISK_UART3.WP7816T0)// UART 7816 Wait Parameter Register #define UART3_WP7816T1 (KINETISK_UART3.WP7816T1)// UART 7816 Wait Parameter Register #define UART3_WN7816 (KINETISK_UART3.WN7816) // UART 7816 Wait N Register #define UART3_WF7816 (KINETISK_UART3.WF7816) // UART 7816 Wait FD Register #define UART3_ET7816 (KINETISK_UART3.ET7816) // UART 7816 Error Threshold Register #define UART3_TL7816 (KINETISK_UART3.TL7816) // UART 7816 Transmit Length Register #define KINETISK_UART4 (*(KINETISK_UART_t *)0x400EA000) #define UART4_BDH (KINETISK_UART4.BDH) // UART Baud Rate Registers: High #define UART4_BDL (KINETISK_UART4.BDL) // UART Baud Rate Registers: Low #define UART4_C1 (KINETISK_UART4.C1) // UART Control Register 1 #define UART4_C2 (KINETISK_UART4.C2) // UART Control Register 2 #define UART4_S1 (KINETISK_UART4.S1) // UART Status Register 1 #define UART4_S2 (KINETISK_UART4.S2) // UART Status Register 2 #define UART4_C3 (KINETISK_UART4.C3) // UART Control Register 3 #define UART4_D (KINETISK_UART4.D) // UART Data Register #define UART4_MA1 (KINETISK_UART4.MA1) // UART Match Address Registers 1 #define UART4_MA2 (KINETISK_UART4.MA2) // UART Match Address Registers 2 #define UART4_C4 (KINETISK_UART4.C4) // UART Control Register 4 #define UART4_C5 (KINETISK_UART4.C5) // UART Control Register 5 #define UART4_ED (KINETISK_UART4.ED) // UART Extended Data Register #define UART4_MODEM (KINETISK_UART4.MODEM) // UART Modem Register #define UART4_IR (KINETISK_UART4.IR) // UART Infrared Register #define UART4_PFIFO (KINETISK_UART4.PFIFO) // UART FIFO Parameters #define UART4_CFIFO (KINETISK_UART4.CFIFO) // UART FIFO Control Register #define UART4_SFIFO (KINETISK_UART4.SFIFO) // UART FIFO Status Register #define UART4_TWFIFO (KINETISK_UART4.TWFIFO) // UART FIFO Transmit Watermark #define UART4_TCFIFO (KINETISK_UART4.TCFIFO) // UART FIFO Transmit Count #define UART4_RWFIFO (KINETISK_UART4.RWFIFO) // UART FIFO Receive Watermark #define UART4_RCFIFO (KINETISK_UART4.RCFIFO) // UART FIFO Receive Count #define UART4_C7816 (KINETISK_UART4.C7816) // UART 7816 Control Register #define UART4_IE7816 (KINETISK_UART4.IE7816) // UART 7816 Interrupt Enable Register #define UART4_IS7816 (KINETISK_UART4.IS7816) // UART 7816 Interrupt Status Register #define UART4_WP7816T0 (KINETISK_UART4.WP7816T0)// UART 7816 Wait Parameter Register #define UART4_WP7816T1 (KINETISK_UART4.WP7816T1)// UART 7816 Wait Parameter Register #define UART4_WN7816 (KINETISK_UART4.WN7816) // UART 7816 Wait N Register #define UART4_WF7816 (KINETISK_UART4.WF7816) // UART 7816 Wait FD Register #define UART4_ET7816 (KINETISK_UART4.ET7816) // UART 7816 Error Threshold Register #define UART4_TL7816 (KINETISK_UART4.TL7816) // UART 7816 Transmit Length Register #define KINETISK_UART5 (*(KINETISK_UART_t *)0x400EB000) #define UART5_BDH (KINETISK_UART5.BDH) // UART Baud Rate Registers: High #define UART5_BDL (KINETISK_UART5.BDL) // UART Baud Rate Registers: Low #define UART5_C1 (KINETISK_UART5.C1) // UART Control Register 1 #define UART5_C2 (KINETISK_UART5.C2) // UART Control Register 2 #define UART5_S1 (KINETISK_UART5.S1) // UART Status Register 1 #define UART5_S2 (KINETISK_UART5.S2) // UART Status Register 2 #define UART5_C3 (KINETISK_UART5.C3) // UART Control Register 3 #define UART5_D (KINETISK_UART5.D) // UART Data Register #define UART5_MA1 (KINETISK_UART5.MA1) // UART Match Address Registers 1 #define UART5_MA2 (KINETISK_UART5.MA2) // UART Match Address Registers 2 #define UART5_C4 (KINETISK_UART5.C4) // UART Control Register 4 #define UART5_C5 (KINETISK_UART5.C5) // UART Control Register 5 #define UART5_ED (KINETISK_UART5.ED) // UART Extended Data Register #define UART5_MODEM (KINETISK_UART5.MODEM) // UART Modem Register #define UART5_IR (KINETISK_UART5.IR) // UART Infrared Register #define UART5_PFIFO (KINETISK_UART5.PFIFO) // UART FIFO Parameters #define UART5_CFIFO (KINETISK_UART5.CFIFO) // UART FIFO Control Register #define UART5_SFIFO (KINETISK_UART5.SFIFO) // UART FIFO Status Register #define UART5_TWFIFO (KINETISK_UART5.TWFIFO) // UART FIFO Transmit Watermark #define UART5_TCFIFO (KINETISK_UART5.TCFIFO) // UART FIFO Transmit Count #define UART5_RWFIFO (KINETISK_UART5.RWFIFO) // UART FIFO Receive Watermark #define UART5_RCFIFO (KINETISK_UART5.RCFIFO) // UART FIFO Receive Count #define UART5_C7816 (KINETISK_UART5.C7816) // UART 7816 Control Register #define UART5_IE7816 (KINETISK_UART5.IE7816) // UART 7816 Interrupt Enable Register #define UART5_IS7816 (KINETISK_UART5.IS7816) // UART 7816 Interrupt Status Register #define UART5_WP7816T0 (KINETISK_UART5.WP7816T0)// UART 7816 Wait Parameter Register #define UART5_WP7816T1 (KINETISK_UART5.WP7816T1)// UART 7816 Wait Parameter Register #define UART5_WN7816 (KINETISK_UART5.WN7816) // UART 7816 Wait N Register #define UART5_WF7816 (KINETISK_UART5.WF7816) // UART 7816 Wait FD Register #define UART5_ET7816 (KINETISK_UART5.ET7816) // UART 7816 Error Threshold Register #define UART5_TL7816 (KINETISK_UART5.TL7816) // UART 7816 Transmit Length Register // Secured digital host controller (SDHC) #define SDHC_DSADDR (*(volatile uint32_t *)0x400B1000) // DMA System Address register #define SDHC_BLKATTR (*(volatile uint32_t *)0x400B1004) // Block Attributes register #define SDHC_BLKATTR_BLKCNT(n) (uint32_t)(((n) & 0xFFFF)<<16) // Blocks Count For Current Transfer #define SDHC_BLKATTR_BLKCNT_MASK ((uint32_t)0xFFFF0000) #define SDHC_BLKATTR_BLKSIZE(n) (uint32_t)(((n) & 0x1FFF)<<0) // Transfer Block Size #define SDHC_CMDARG (*(volatile uint32_t *)0x400B1008) // Command Argument register #define SDHC_XFERTYP (*(volatile uint32_t *)0x400B100C) // Transfer Type register #define SDHC_XFERTYP_CMDINX(n) (uint32_t)(((n) & 0x3F)<<24) // Command Index #define SDHC_XFERTYP_CMDTYP(n) (uint32_t)(((n) & 0x3)<<22) // Command Type #define SDHC_XFERTYP_DPSEL ((uint32_t)0x00200000) // Data Present Select #define SDHC_XFERTYP_CICEN ((uint32_t)0x00100000) // Command Index Check Enable #define SDHC_XFERTYP_CCCEN ((uint32_t)0x00080000) // Command CRC Check Enable #define SDHC_XFERTYP_RSPTYP(n) (uint32_t)(((n) & 0x3)<<16) // Response Type Select #define SDHC_XFERTYP_MSBSEL ((uint32_t)0x00000020) // Multi/Single Block Select #define SDHC_XFERTYP_DTDSEL ((uint32_t)0x00000010) // Data Transfer Direction Select #define SDHC_XFERTYP_AC12EN ((uint32_t)0x00000004) // Auto CMD12 Enable #define SDHC_XFERTYP_BCEN ((uint32_t)0x00000002) // Block Count Enable #define SDHC_XFERTYP_DMAEN ((uint32_t)0x00000001) // DMA Enable #define SDHC_CMDRSP0 (*(volatile uint32_t *)0x400B1010) // Command Response 0 #define SDHC_CMDRSP1 (*(volatile uint32_t *)0x400B1014) // Command Response 1 #define SDHC_CMDRSP2 (*(volatile uint32_t *)0x400B1018) // Command Response 2 #define SDHC_CMDRSP3 (*(volatile uint32_t *)0x400B101C) // Command Response 3 #define SDHC_DATPORT (*(volatile uint32_t *)0x400B1020) // Buffer Data Port register #define SDHC_PRSSTAT (*(volatile uint32_t *)0x400B1024) // Present State register #define SDHC_PRSSTAT_DLSL_MASK ((uint32_t)0xFF000000) // DAT Line Signal Level #define SDHC_PRSSTAT_CLSL ((uint32_t)0x00800000) // CMD Line Signal Level #define SDHC_PRSSTAT_CINS ((uint32_t)0x00010000) // Card Inserted #define SDHC_PRSSTAT_BREN ((uint32_t)0x00000800) // Buffer Read Enable #define SDHC_PRSSTAT_BWEN ((uint32_t)0x00000400) // Buffer Write Enable #define SDHC_PRSSTAT_RTA ((uint32_t)0x00000200) // Read Transfer Active #define SDHC_PRSSTAT_WTA ((uint32_t)0x00000100) // Write Transfer Active #define SDHC_PRSSTAT_SDOFF ((uint32_t)0x00000080) // SD Clock Gated Off Internally #define SDHC_PRSSTAT_PEROFF ((uint32_t)0x00000040) // SDHC clock Gated Off Internally #define SDHC_PRSSTAT_HCKOFF ((uint32_t)0x00000020) // System Clock Gated Off Internally #define SDHC_PRSSTAT_IPGOFF ((uint32_t)0x00000010) // Bus Clock Gated Off Internally #define SDHC_PRSSTAT_SDSTB ((uint32_t)0x00000008) // SD Clock Stable #define SDHC_PRSSTAT_DLA ((uint32_t)0x00000004) // Data Line Active #define SDHC_PRSSTAT_CDIHB ((uint32_t)0x00000002) // Command Inhibit (DAT) #define SDHC_PRSSTAT_CIHB ((uint32_t)0x00000001) // Command Inhibit (CMD) #define SDHC_PROCTL (*(volatile uint32_t *)0x400B1028) // Protocol Control register #define SDHC_PROCTL_WECRM ((uint32_t)0x04000000) // Wakeup Event Enable On SD Card Removal #define SDHC_PROCTL_WECINS ((uint32_t)0x02000000) // Wakeup Event Enable On SD Card Insertion #define SDHC_PROCTL_WECINT ((uint32_t)0x01000000) // Wakeup Event Enable On Card Interrupt #define SDHC_PROCTL_IABG ((uint32_t)0x00080000) // Interrupt At Block Gap #define SDHC_PROCTL_RWCTL ((uint32_t)0x00040000) // Read Wait Control #define SDHC_PROCTL_CREQ ((uint32_t)0x00020000) // Continue Request #define SDHC_PROCTL_SABGREQ ((uint32_t)0x00010000) // Stop At Block Gap Request #define SDHC_PROCTL_DMAS(n) (uint32_t)(((n) & 0x3)<<8) // DMA Select #define SDHC_PROCTL_CDSS ((uint32_t)0x00000080) // Card Detect Signal Selection #define SDHC_PROCTL_CDTL ((uint32_t)0x00000040) // Card Detect Test Level #define SDHC_PROCTL_EMODE(n) (uint32_t)(((n) & 0x3)<<4) // Endian Mode #define SDHC_PROCTL_D3CD ((uint32_t)0x00000008) // DAT3 As Card Detection Pin #define SDHC_PROCTL_DTW(n) (uint32_t)(((n) & 0x3)<<1) // Data Transfer Width, 0=1bit, 1=4bit, 2=8bit #define SDHC_PROCTL_DTW_MASK ((uint32_t)0x00000006) #define SDHC_PROCTL_LCTL ((uint32_t)0x00000001) // LED Control #define SDHC_SYSCTL (*(volatile uint32_t *)0x400B102C) // System Control register #define SDHC_SYSCTL_INITA ((uint32_t)0x08000000) // Initialization Active #define SDHC_SYSCTL_RSTD ((uint32_t)0x04000000) // Software Reset For DAT Line #define SDHC_SYSCTL_RSTC ((uint32_t)0x02000000) // Software Reset For CMD Line #define SDHC_SYSCTL_RSTA ((uint32_t)0x01000000) // Software Reset For ALL #define SDHC_SYSCTL_DTOCV(n) (uint32_t)(((n) & 0xF)<<16) // Data Timeout Counter Value #define SDHC_SYSCTL_DTOCV_MASK ((uint32_t)0x000F0000) #define SDHC_SYSCTL_SDCLKFS(n) (uint32_t)(((n) & 0xFF)<<8) // SDCLK Frequency Select #define SDHC_SYSCTL_SDCLKFS_MASK ((uint32_t)0x0000FF00) #define SDHC_SYSCTL_DVS(n) (uint32_t)(((n) & 0xF)<<4) // Divisor #define SDHC_SYSCTL_DVS_MASK ((uint32_t)0x000000F0) #define SDHC_SYSCTL_SDCLKEN ((uint32_t)0x00000008) // SD Clock Enable #define SDHC_SYSCTL_PEREN ((uint32_t)0x00000004) // Peripheral Clock Enable #define SDHC_SYSCTL_HCKEN ((uint32_t)0x00000002) // System Clock Enable #define SDHC_SYSCTL_IPGEN ((uint32_t)0x00000001) // IPG Clock Enable #define SDHC_IRQSTAT (*(volatile uint32_t *)0x400B1030) // Interrupt Status register #define SDHC_IRQSTAT_DMAE ((uint32_t)0x10000000) // DMA Error #define SDHC_IRQSTAT_AC12E ((uint32_t)0x01000000) // Auto CMD12 Error #define SDHC_IRQSTAT_DEBE ((uint32_t)0x00400000) // Data End Bit Error #define SDHC_IRQSTAT_DCE ((uint32_t)0x00200000) // Data CRC Error #define SDHC_IRQSTAT_DTOE ((uint32_t)0x00100000) // Data Timeout Error #define SDHC_IRQSTAT_CIE ((uint32_t)0x00080000) // Command Index Error #define SDHC_IRQSTAT_CEBE ((uint32_t)0x00040000) // Command End Bit Error #define SDHC_IRQSTAT_CCE ((uint32_t)0x00020000) // Command CRC Error #define SDHC_IRQSTAT_CTOE ((uint32_t)0x00010000) // Command Timeout Error #define SDHC_IRQSTAT_CINT ((uint32_t)0x00000100) // Card Interrupt #define SDHC_IRQSTAT_CRM ((uint32_t)0x00000080) // Card Removal #define SDHC_IRQSTAT_CINS ((uint32_t)0x00000040) // Card Insertion #define SDHC_IRQSTAT_BRR ((uint32_t)0x00000020) // Buffer Read Ready #define SDHC_IRQSTAT_BWR ((uint32_t)0x00000010) // Buffer Write Ready #define SDHC_IRQSTAT_DINT ((uint32_t)0x00000008) // DMA Interrupt #define SDHC_IRQSTAT_BGE ((uint32_t)0x00000004) // Block Gap Event #define SDHC_IRQSTAT_TC ((uint32_t)0x00000002) // Transfer Complete #define SDHC_IRQSTAT_CC ((uint32_t)0x00000001) // Command Complete #define SDHC_IRQSTATEN (*(volatile uint32_t *)0x400B1034) // Interrupt Status Enable register #define SDHC_IRQSTATEN_DMAESEN ((uint32_t)0x10000000) // DMA Error Status Enable #define SDHC_IRQSTATEN_AC12ESEN ((uint32_t)0x01000000) // Auto CMD12 Error Status Enable #define SDHC_IRQSTATEN_DEBESEN ((uint32_t)0x00400000) // Data End Bit Error Status Enable #define SDHC_IRQSTATEN_DCESEN ((uint32_t)0x00200000) // Data CRC Error Status Enable #define SDHC_IRQSTATEN_DTOESEN ((uint32_t)0x00100000) // Data Timeout Error Status Enable #define SDHC_IRQSTATEN_CIESEN ((uint32_t)0x00080000) // Command Index Error Status Enable #define SDHC_IRQSTATEN_CEBESEN ((uint32_t)0x00040000) // Command End Bit Error Status Enable #define SDHC_IRQSTATEN_CCESEN ((uint32_t)0x00020000) // Command CRC Error Status Enable #define SDHC_IRQSTATEN_CTOESEN ((uint32_t)0x00010000) // Command Timeout Error Status Enable #define SDHC_IRQSTATEN_CINTSEN ((uint32_t)0x00000100) // Card Interrupt Status Enable #define SDHC_IRQSTATEN_CRMSEN ((uint32_t)0x00000080) // Card Removal Status Enable #define SDHC_IRQSTATEN_CINSEN ((uint32_t)0x00000040) // Card Insertion Status Enable #define SDHC_IRQSTATEN_BRRSEN ((uint32_t)0x00000020) // Buffer Read Ready Status Enable #define SDHC_IRQSTATEN_BWRSEN ((uint32_t)0x00000010) // Buffer Write Ready Status Enable #define SDHC_IRQSTATEN_DINTSEN ((uint32_t)0x00000008) // DMA Interrupt Status Enable #define SDHC_IRQSTATEN_BGESEN ((uint32_t)0x00000004) // Block Gap Event Status Enable #define SDHC_IRQSTATEN_TCSEN ((uint32_t)0x00000002) // Transfer Complete Status Enable #define SDHC_IRQSTATEN_CCSEN ((uint32_t)0x00000001) // Command Complete Status Enable #define SDHC_IRQSIGEN (*(volatile uint32_t *)0x400B1038) // Interrupt Signal Enable register #define SDHC_IRQSIGEN_DMAEIEN ((uint32_t)0x10000000) // DMA Error Interrupt Enable #define SDHC_IRQSIGEN_AC12EIEN ((uint32_t)0x01000000) // Auto CMD12 Error Interrupt Enable #define SDHC_IRQSIGEN_DEBEIEN ((uint32_t)0x00400000) // Data End Bit Error Interrupt Enable #define SDHC_IRQSIGEN_DCEIEN ((uint32_t)0x00200000) // Data CRC Error Interrupt Enable #define SDHC_IRQSIGEN_DTOEIEN ((uint32_t)0x00100000) // Data Timeout Error Interrupt Enable #define SDHC_IRQSIGEN_CIEIEN ((uint32_t)0x00080000) // Command Index Error Interrupt Enable #define SDHC_IRQSIGEN_CEBEIEN ((uint32_t)0x00040000) // Command End Bit Error Interrupt Enable #define SDHC_IRQSIGEN_CCEIEN ((uint32_t)0x00020000) // Command CRC Error Interrupt Enable #define SDHC_IRQSIGEN_CTOEIEN ((uint32_t)0x00010000) // Command Timeout Error Interrupt Enable #define SDHC_IRQSIGEN_CINTIEN ((uint32_t)0x00000100) // Card Interrupt Interrupt Enable #define SDHC_IRQSIGEN_CRMIEN ((uint32_t)0x00000080) // Card Removal Interrupt Enable #define SDHC_IRQSIGEN_CINSIEN ((uint32_t)0x00000040) // Card Insertion Interrupt Enable #define SDHC_IRQSIGEN_BRRIEN ((uint32_t)0x00000020) // Buffer Read Ready Interrupt Enable #define SDHC_IRQSIGEN_BWRIEN ((uint32_t)0x00000010) // Buffer Write Ready Interrupt Enable #define SDHC_IRQSIGEN_DINTIEN ((uint32_t)0x00000008) // DMA Interrupt Interrupt Enable #define SDHC_IRQSIGEN_BGEIEN ((uint32_t)0x00000004) // Block Gap Event Interrupt Enable #define SDHC_IRQSIGEN_TCIEN ((uint32_t)0x00000002) // Transfer Complete Interrupt Enable #define SDHC_IRQSIGEN_CCIEN ((uint32_t)0x00000001) // Command Complete Interrupt Enable #define SDHC_AC12ERR (*(volatile uint32_t *)0x400B103C) // Auto CMD12 Error Status Register #define SDHC_AC12ERR_CNIBAC12E ((uint32_t)0x00000080) // Command Not Issued By Auto CMD12 Error #define SDHC_AC12ERR_AC12IE ((uint32_t)0x00000010) // Auto CMD12 Index Error #define SDHC_AC12ERR_AC12CE ((uint32_t)0x00000008) // Auto CMD12 CRC Error #define SDHC_AC12ERR_AC12EBE ((uint32_t)0x00000004) // Auto CMD12 End Bit Error #define SDHC_AC12ERR_AC12TOE ((uint32_t)0x00000002) // Auto CMD12 Timeout Error #define SDHC_AC12ERR_AC12NE ((uint32_t)0x00000001) // Auto CMD12 Not Executed #define SDHC_HTCAPBLT (*(volatile uint32_t *)0x400B1040) // Host Controller Capabilities #define SDHC_WML (*(volatile uint32_t *)0x400B1044) // Watermark Level Register #define SDHC_WML_WRWML(n) (uint32_t)(((n) & 0x7F)<<16) // Write Watermark Level #define SDHC_WML_RDWML(n) (uint32_t)(((n) & 0x7F)<<0) // Read Watermark Level #define SDHC_FEVT (*(volatile uint32_t *)0x400B1050) // Force Event register #define SDHC_FEVT_CINT ((uint32_t)0x80000000) // Force Event Card Interrupt #define SDHC_FEVT_DMAE ((uint32_t)0x10000000) // Force Event DMA Error #define SDHC_FEVT_AC12E ((uint32_t)0x01000000) // Force Event Auto CMD12 Error #define SDHC_FEVT_DEBE ((uint32_t)0x00400000) // Force Event Data End Bit Error #define SDHC_FEVT_DCE ((uint32_t)0x00200000) // Force Event Data CRC Error #define SDHC_FEVT_DTOE ((uint32_t)0x00100000) // Force Event Data Timeout Error #define SDHC_FEVT_CIE ((uint32_t)0x00080000) // Force Event Command Index Error #define SDHC_FEVT_CEBE ((uint32_t)0x00040000) // Force Event Command End Bit Error #define SDHC_FEVT_CCE ((uint32_t)0x00020000) // Force Event Command CRC Error #define SDHC_FEVT_CTOE ((uint32_t)0x00010000) // Force Event Command Timeout Error #define SDHC_FEVT_CNIBAC12E ((uint32_t)0x00000080) // Force Event Command Not Executed By Auto Command 12 Error #define SDHC_FEVT_AC12IE ((uint32_t)0x00000010) // Force Event Auto Command 12 Index Error #define SDHC_FEVT_AC12EBE ((uint32_t)0x00000008) // Force Event Auto Command 12 End Bit Error #define SDHC_FEVT_AC12CE ((uint32_t)0x00000004) // Force Event Auto Command 12 CRC Error #define SDHC_FEVT_AC12TOE ((uint32_t)0x00000002) // Force Event Auto Command 12 Time Out Error #define SDHC_FEVT_AC12NE ((uint32_t)0x00000001) // Force Event Auto Command 12 Not Executed #define SDHC_ADMAES (*(volatile uint32_t *)0x400B1054) // ADMA Error Status register #define SDHC_ADMAES_ADMADCE ((uint32_t)0x00000008) #define SDHC_ADMAES_ADMALME ((uint32_t)0x00000004) #define SDHC_ADMAES_ADMAES_MASK ((uint32_t)0x00000003) #define SDHC_ADSADDR (*(volatile uint32_t *)0x400B1058) // ADMA System Addressregister #define SDHC_VENDOR (*(volatile uint32_t *)0x400B10C0) // Vendor Specific register #define SDHC_VENDOR_INTSTVAL_MASK ((uint32_t)0x00FF0000) #define SDHC_VENDOR_EXBLKNU ((uint32_t)0x00000002) #define SDHC_MMCBOOT (*(volatile uint32_t *)0x400B10C4) // MMC Boot register #define SDHC_MMCBOOT_BOOTBLKCNT(n) (uint32_t)(((n) & 0xFFF)<<16) // stop at block gap value of automatic mode #define SDHC_MMCBOOT_AUTOSABGEN ((uint32_t)0x00000080) // enable auto stop at block gap function #define SDHC_MMCBOOT_BOOTEN ((uint32_t)0x00000040) // Boot Mode Enable #define SDHC_MMCBOOT_BOOTMODE ((uint32_t)0x00000020) // Boot Mode Select #define SDHC_MMCBOOT_BOOTACK ((uint32_t)0x00000010) // Boot Ack Mode Select #define SDHC_MMCBOOT_DTOCVACK(n) (uint32_t)(((n) & 0xF)<<0) // Boot ACK Time Out Counter Value #define SDHC_HOSTVER (*(volatile uint32_t *)0x400B10FC) // Host Controller Version /////////////////////////////////// // Low Power Asynchronous Receiver/Transmitter (LPUART) typedef struct __attribute__((packed)) { volatile uint32_t BAUD; volatile uint32_t STAT; volatile uint32_t CTRL; volatile uint32_t DATA; volatile uint32_t MATCH; volatile uint32_t MODIR; } KINETISK_LPUART_t; #define KINETISK_LPUART0 (*(KINETISK_LPUART_t *)0x400C4000) #define LPUART0_BAUD (KINETISK_LPUART0.BAUD) // LPUART Baud Register #define LPUART_BAUD_MAEN1 ((uint32_t)0x80000000) // Enable automatic address or data maching #define LPUART_BAUD_MAEN2 ((uint32_t)0x40000000) // Enable automatic address or data maching #define LPUART_BAUD_M10 ((uint32_t)0x20000000) // 10-bit Mode select #define LPUART_BAUD_OSR(n) ((uint32_t)((n) & 0x1f) << 24) // Over sampling ratio #define LPUART_BAUD_TDMAE ((uint32_t)0x00800000) // Transmitter Dma Enable #define LPUART_BAUD_RDMAE ((uint32_t)0x00400000) // Receiver Dma Enable #define LPUART_BAUD_BOTHEDGE ((uint32_t)0x00020000) // Both edge sampling needed OSR 4-7 #define LPUART_BAUD_SBNS ((uint32_t)0x00002000) // UART Stop Bit Number Select #define LPUART_BAUD_SBR(n) ((uint32_t)((n) & 0x1fff) << 0) // set baud rate divisor #define LPUART0_STAT (KINETISK_LPUART0.STAT) // LPUART Status register #define LPUART_STAT_LBKDIF ((uint32_t)0x80000000) // LIN Break Detect Interrupt Flag #define LPUART_STAT_RXEDGIF ((uint32_t)0x40000000) // RxD Pin Active Edge Interrupt Flag #define LPUART_STAT_MSBF ((uint32_t)0x20000000) // Most Significant Bit First #define LPUART_STAT_RXINV ((uint32_t)0x10000000) // Receive Data Inversion #define LPUART_STAT_RWUID ((uint32_t)0x08000000) // Receive Wakeup Idle Detect #define LPUART_STAT_BRK13 ((uint32_t)0x04000000) // Break Transmit Character Length #define LPUART_STAT_LBKDE ((uint32_t)0x02000000) // LIN Break Detection Enable #define LPUART_STAT_RAF ((uint32_t)0x01000000) // Receiver Active Flag #define LPUART_STAT_TDRE ((uint32_t)0x00800000) // Transmit Data Register Empty Flag #define LPUART_STAT_TC ((uint32_t)0x00400000) // Transmit Complete Flag #define LPUART_STAT_RDRF ((uint32_t)0x00200000) // Receive Data Register Full Flag #define LPUART_STAT_IDLE ((uint32_t)0x00100000) // Idle Line Flag #define LPUART_STAT_OR ((uint32_t)0x00080000) // Receiver Overrun Flag #define LPUART_STAT_NF ((uint32_t)0x00040000) // Noise Flag #define LPUART_STAT_FE ((uint32_t)0x00020000) // Framing Error Flag #define LPUART_STAT_PF ((uint32_t)0x00010000) // Parity Error Flag #define LPUART_STAT_MA1F ((uint32_t)0x00008000) // Match 1 Flag #define LPUART_STAT_MA2F ((uint32_t)0x00004000) // Match 2 Flag #define LPUART0_CTRL (KINETISK_LPUART0.CTRL) // LPUART Control register #define LPUART_CTRL_R8 ((uint32_t)0x80000000) // Received Bit 8 #define LPUART_CTRL_T8 ((uint32_t)0x40000000) // Transmit Bit 8 #define LPUART_CTRL_TXDIR ((uint32_t)0x20000000) // TX Pin Direction in Single-Wire mode #define LPUART_CTRL_TXINV ((uint32_t)0x10000000) // Transmit Data Inversion #define LPUART_CTRL_ORIE ((uint32_t)0x08000000) // Overrun Error Interrupt Enable #define LPUART_CTRL_NEIE ((uint32_t)0x04000000) // Noise Error Interrupt Enable #define LPUART_CTRL_FEIE ((uint32_t)0x02000000) // Framing Error Interrupt Enable #define LPUART_CTRL_PEIE ((uint32_t)0x01000000) // Parity Error Interrupt Enable #define LPUART_CTRL_TIE ((uint32_t)0x00800000) // Transmitter Interrupt or DMA Transfer Enable. #define LPUART_CTRL_TCIE ((uint32_t)0x00400000) // Transmission Complete Interrupt Enable #define LPUART_CTRL_RIE ((uint32_t)0x00200000) // Receiver Full Interrupt or DMA Transfer Enable #define LPUART_CTRL_ILIE ((uint32_t)0x00100000) // Idle Line Interrupt Enable #define LPUART_CTRL_TE ((uint32_t)0x00080000) // Transmitter Enable #define LPUART_CTRL_RE ((uint32_t)0x00040000) // Receiver Enable #define LPUART_CTRL_RWU ((uint32_t)0x00020000) // Receiver Wakeup Control #define LPUART_CTRL_SBK ((uint32_t)0x00010000) // Send Break #define LPUART_CTRL_MAEN1 ((uint32_t)0x00008000) // Match Address Mode Enable 1 #define LPUART_CTRL_MAEN2 ((uint32_t)0x00004000) // Match Address Mode Enable 2 #define LPUART_CTRL_LOOPS ((uint32_t)0x00000080) // When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input #define LPUART_CTRL_UARTSWAI ((uint32_t)0x00000040) // UART Stops in Wait Mode #define LPUART_CTRL_RSRC ((uint32_t)0x00000020) // When LOOPS is set, the RSRC field determines the source for the receiver shift register input #define LPUART_CTRL_M ((uint32_t)0x00000010) // 9-bit or 8-bit Mode Select #define LPUART_CTRL_WAKE ((uint32_t)0x00000008) // Determines which condition wakes the UART #define LPUART_CTRL_ILT ((uint32_t)0x00000004) // Idle Line Type Select #define LPUART_CTRL_PE ((uint32_t)0x00000002) // Parity Enable #define LPUART_CTRL_PT ((uint32_t)0x00000001) // Parity Type, 0=even, 1=odd #define LPUART0_DATA (KINETISK_LPUART0.DATA) // LPUART Data register #define LPUART_DATA_NOISY ((uint32_t)0x00080000) // Data received with noise #define LPUART_DATA_PARITY ((uint32_t)0x00040000) // Data received with Parity error #define LPUART_DATA_FRETSC ((uint32_t)0x00020000) // Frame error/Transmit Special char #define LPUART_DATA_RXEMPT ((uint32_t)0x00010000) // receive buffer empty #define LPUART_DATA_IDLINE ((uint32_t)0x00008000) // Match Address Mode Enable 1 #define LPUART0_MATCH (KINETISK_LPUART0.MATCH) // LPUART Match register #define LPUART0_MODIR (KINETISK_LPUART0.MODIR) // LPUART Modem IrDA Register // Synchronous Audio Interface (SAI) #define I2S0_TCSR (*(volatile uint32_t *)0x4002F000) // SAI Transmit Control Register #define I2S_TCSR_TE ((uint32_t)0x80000000) // Transmitter Enable #define I2S_TCSR_STOPE ((uint32_t)0x40000000) // Transmitter Enable in Stop mode #define I2S_TCSR_DBGE ((uint32_t)0x20000000) // Transmitter Enable in Debug mode #define I2S_TCSR_BCE ((uint32_t)0x10000000) // Bit Clock Enable #define I2S_TCSR_FR ((uint32_t)0x02000000) // FIFO Reset #define I2S_TCSR_SR ((uint32_t)0x01000000) // Software Reset #define I2S_TCSR_WSF ((uint32_t)0x00100000) // Word Start Flag #define I2S_TCSR_SEF ((uint32_t)0x00080000) // Sync Error Flag #define I2S_TCSR_FEF ((uint32_t)0x00040000) // FIFO Error Flag (underrun) #define I2S_TCSR_FWF ((uint32_t)0x00020000) // FIFO Warning Flag (empty) #define I2S_TCSR_FRF ((uint32_t)0x00010000) // FIFO Request Flag (Data Ready) #define I2S_TCSR_WSIE ((uint32_t)0x00001000) // Word Start Interrupt Enable #define I2S_TCSR_SEIE ((uint32_t)0x00000800) // Sync Error Interrupt Enable #define I2S_TCSR_FEIE ((uint32_t)0x00000400) // FIFO Error Interrupt Enable #define I2S_TCSR_FWIE ((uint32_t)0x00000200) // FIFO Warning Interrupt Enable #define I2S_TCSR_FRIE ((uint32_t)0x00000100) // FIFO Request Interrupt Enable #define I2S_TCSR_FWDE ((uint32_t)0x00000002) // FIFO Warning DMA Enable #define I2S_TCSR_FRDE ((uint32_t)0x00000001) // FIFO Request DMA Enable #define I2S0_TCR1 (*(volatile uint32_t *)0x4002F004) // SAI Transmit Configuration 1 Register #define I2S_TCR1_TFW(n) ((uint32_t)n & 0x03) // Transmit FIFO watermark #define I2S0_TCR2 (*(volatile uint32_t *)0x4002F008) // SAI Transmit Configuration 2 Register #define I2S_TCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2 #define I2S_TCR2_BCD ((uint32_t)1<<24) // Bit clock direction #define I2S_TCR2_BCP ((uint32_t)1<<25) // Bit clock polarity #define I2S_TCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK #define I2S_TCR2_BCI ((uint32_t)1<<28) // Bit clock input #define I2S_TCR2_BCS ((uint32_t)1<<29) // Bit clock swap #define I2S_TCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver #define I2S0_TCR3 (*(volatile uint32_t *)0x4002F00C) // SAI Transmit Configuration 3 Register #define I2S_TCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration #define I2S_TCR3_TCE ((uint32_t)0x10000) // transmit channel enable #define I2S_TCR3_TCE_2CH ((uint32_t)0x30000) // transmit 2 channel enable #define I2S0_TCR4 (*(volatile uint32_t *)0x4002F010) // SAI Transmit Configuration 4 Register #define I2S_TCR4_FSD ((uint32_t)1) // Frame Sync Direction #define I2S_TCR4_FSP ((uint32_t)2) // Frame Sync Polarity #define I2S_TCR4_FSE ((uint32_t)8) // Frame Sync Early #define I2S_TCR4_MF ((uint32_t)0x10) // MSB First #define I2S_TCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width #define I2S_TCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size #define I2S0_TCR5 (*(volatile uint32_t *)0x4002F014) // SAI Transmit Configuration 5 Register #define I2S_TCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted #define I2S_TCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width #define I2S_TCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width #define I2S0_TDR0 (*(volatile uint32_t *)0x4002F020) // SAI Transmit Data Register #define I2S0_TDR1 (*(volatile uint32_t *)0x4002F024) // SAI Transmit Data Register #define I2S0_TFR0 (*(volatile uint32_t *)0x4002F040) // SAI Transmit FIFO Register #define I2S0_TFR1 (*(volatile uint32_t *)0x4002F044) // SAI Transmit FIFO Register #define I2S_TFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer #define I2S_TFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer #define I2S0_TMR (*(volatile uint32_t *)0x4002F060) // SAI Transmit Mask Register #define I2S_TMR_TWM(n) ((uint32_t)n & 0xFFFFFFFF) // #define I2S0_RCSR (*(volatile uint32_t *)0x4002F080) // SAI Receive Control Register #define I2S_RCSR_RE ((uint32_t)0x80000000) // Receiver Enable #define I2S_RCSR_STOPE ((uint32_t)0x40000000) // Receiver Enable in Stop mode #define I2S_RCSR_DBGE ((uint32_t)0x20000000) // Receiver Enable in Debug mode #define I2S_RCSR_BCE ((uint32_t)0x10000000) // Bit Clock Enable #define I2S_RCSR_FR ((uint32_t)0x02000000) // FIFO Reset #define I2S_RCSR_SR ((uint32_t)0x01000000) // Software Reset #define I2S_RCSR_WSF ((uint32_t)0x00100000) // Word Start Flag #define I2S_RCSR_SEF ((uint32_t)0x00080000) // Sync Error Flag #define I2S_RCSR_FEF ((uint32_t)0x00040000) // FIFO Error Flag (underrun) #define I2S_RCSR_FWF ((uint32_t)0x00020000) // FIFO Warning Flag (empty) #define I2S_RCSR_FRF ((uint32_t)0x00010000) // FIFO Request Flag (Data Ready) #define I2S_RCSR_WSIE ((uint32_t)0x00001000) // Word Start Interrupt Enable #define I2S_RCSR_SEIE ((uint32_t)0x00000800) // Sync Error Interrupt Enable #define I2S_RCSR_FEIE ((uint32_t)0x00000400) // FIFO Error Interrupt Enable #define I2S_RCSR_FWIE ((uint32_t)0x00000200) // FIFO Warning Interrupt Enable #define I2S_RCSR_FRIE ((uint32_t)0x00000100) // FIFO Request Interrupt Enable #define I2S_RCSR_FWDE ((uint32_t)0x00000002) // FIFO Warning DMA Enable #define I2S_RCSR_FRDE ((uint32_t)0x00000001) // FIFO Request DMA Enable #define I2S0_RCR1 (*(volatile uint32_t *)0x4002F084) // SAI Receive Configuration 1 Register #define I2S_RCR1_RFW(n) ((uint32_t)n & 0x03) // Receive FIFO watermark #define I2S0_RCR2 (*(volatile uint32_t *)0x4002F088) // SAI Receive Configuration 2 Register #define I2S_RCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2 #define I2S_RCR2_BCD ((uint32_t)1<<24) // Bit clock direction #define I2S_RCR2_BCP ((uint32_t)1<<25) // Bit clock polarity #define I2S_RCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK #define I2S_RCR2_BCI ((uint32_t)1<<28) // Bit clock input #define I2S_RCR2_BCS ((uint32_t)1<<29) // Bit clock swap #define I2S_RCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver #define I2S0_RCR3 (*(volatile uint32_t *)0x4002F08C) // SAI Receive Configuration 3 Register #define I2S_RCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration #define I2S_RCR3_RCE ((uint32_t)0x10000) // receive channel enable #define I2S_RCR3_RCE_2CH ((uint32_t)0x30000) // receive 2 channel enable #define I2S0_RCR4 (*(volatile uint32_t *)0x4002F090) // SAI Receive Configuration 4 Register #define I2S_RCR4_FSD ((uint32_t)1) // Frame Sync Direction #define I2S_RCR4_FSP ((uint32_t)2) // Frame Sync Polarity #define I2S_RCR4_FSE ((uint32_t)8) // Frame Sync Early #define I2S_RCR4_MF ((uint32_t)0x10) // MSB First #define I2S_RCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width #define I2S_RCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size #define I2S0_RCR5 (*(volatile uint32_t *)0x4002F094) // SAI Receive Configuration 5 Register #define I2S_RCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted #define I2S_RCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width #define I2S_RCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width #define I2S0_RDR0 (*(volatile uint32_t *)0x4002F0A0) // SAI Receive Data Register #define I2S0_RDR1 (*(volatile uint32_t *)0x4002F0A4) // SAI Receive Data Register #define I2S0_RFR0 (*(volatile uint32_t *)0x4002F0C0) // SAI Receive FIFO Register #define I2S0_RFR1 (*(volatile uint32_t *)0x4002F0C4) // SAI Receive FIFO Register #define I2S_RFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer #define I2S_RFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer #define I2S0_RMR (*(volatile uint32_t *)0x4002F0E0) // SAI Receive Mask Register #define I2S_RMR_RWM(n) ((uint32_t)n & 0xFFFFFFFF) // #define I2S0_MCR (*(volatile uint32_t *)0x4002F100) // SAI MCLK Control Register #define I2S_MCR_DUF ((uint32_t)1<<31) // Divider Update Flag #define I2S_MCR_MOE ((uint32_t)1<<30) // MCLK Output Enable #define I2S_MCR_MICS(n) ((uint32_t)(n & 3)<<24) // MCLK Input Clock Select #define I2S0_MDR (*(volatile uint32_t *)0x4002F104) // SAI MCLK Divide Register #define I2S_MDR_FRACT(n) ((uint32_t)(n & 0xff)<<12) // MCLK Fraction #define I2S_MDR_DIVIDE(n) ((uint32_t)(n & 0xfff)) // MCLK Divide // General-Purpose Input/Output (GPIO) #define GPIOA_PDOR (*(volatile uint32_t *)0x400FF000) // Port Data Output Register #define GPIOA_PSOR (*(volatile uint32_t *)0x400FF004) // Port Set Output Register #define GPIOA_PCOR (*(volatile uint32_t *)0x400FF008) // Port Clear Output Register #define GPIOA_PTOR (*(volatile uint32_t *)0x400FF00C) // Port Toggle Output Register #define GPIOA_PDIR (*(volatile uint32_t *)0x400FF010) // Port Data Input Register #define GPIOA_PDDR (*(volatile uint32_t *)0x400FF014) // Port Data Direction Register #define GPIOB_PDOR (*(volatile uint32_t *)0x400FF040) // Port Data Output Register #define GPIOB_PSOR (*(volatile uint32_t *)0x400FF044) // Port Set Output Register #define GPIOB_PCOR (*(volatile uint32_t *)0x400FF048) // Port Clear Output Register #define GPIOB_PTOR (*(volatile uint32_t *)0x400FF04C) // Port Toggle Output Register #define GPIOB_PDIR (*(volatile uint32_t *)0x400FF050) // Port Data Input Register #define GPIOB_PDDR (*(volatile uint32_t *)0x400FF054) // Port Data Direction Register #define GPIOC_PDOR (*(volatile uint32_t *)0x400FF080) // Port Data Output Register #define GPIOC_PSOR (*(volatile uint32_t *)0x400FF084) // Port Set Output Register #define GPIOC_PCOR (*(volatile uint32_t *)0x400FF088) // Port Clear Output Register #define GPIOC_PTOR (*(volatile uint32_t *)0x400FF08C) // Port Toggle Output Register #define GPIOC_PDIR (*(volatile uint32_t *)0x400FF090) // Port Data Input Register #define GPIOC_PDDR (*(volatile uint32_t *)0x400FF094) // Port Data Direction Register #define GPIOD_PDOR (*(volatile uint32_t *)0x400FF0C0) // Port Data Output Register #define GPIOD_PSOR (*(volatile uint32_t *)0x400FF0C4) // Port Set Output Register #define GPIOD_PCOR (*(volatile uint32_t *)0x400FF0C8) // Port Clear Output Register #define GPIOD_PTOR (*(volatile uint32_t *)0x400FF0CC) // Port Toggle Output Register #define GPIOD_PDIR (*(volatile uint32_t *)0x400FF0D0) // Port Data Input Register #define GPIOD_PDDR (*(volatile uint32_t *)0x400FF0D4) // Port Data Direction Register #define GPIOE_PDOR (*(volatile uint32_t *)0x400FF100) // Port Data Output Register #define GPIOE_PSOR (*(volatile uint32_t *)0x400FF104) // Port Set Output Register #define GPIOE_PCOR (*(volatile uint32_t *)0x400FF108) // Port Clear Output Register #define GPIOE_PTOR (*(volatile uint32_t *)0x400FF10C) // Port Toggle Output Register #define GPIOE_PDIR (*(volatile uint32_t *)0x400FF110) // Port Data Input Register #define GPIOE_PDDR (*(volatile uint32_t *)0x400FF114) // Port Data Direction Register #if defined(KINETISL) #define FGPIOA_PDOR (*(volatile uint32_t *)0xF8000000) // Port Data Output Register #define FGPIOA_PSOR (*(volatile uint32_t *)0xF8000004) // Port Set Output Register #define FGPIOA_PCOR (*(volatile uint32_t *)0xF8000008) // Port Clear Output Register #define FGPIOA_PTOR (*(volatile uint32_t *)0xF800000C) // Port Toggle Output Register #define FGPIOA_PDIR (*(volatile uint32_t *)0xF8000010) // Port Data Input Register #define FGPIOA_PDDR (*(volatile uint32_t *)0xF8000014) // Port Data Direction Register #define FGPIOB_PDOR (*(volatile uint32_t *)0xF8000040) // Port Data Output Register #define FGPIOB_PSOR (*(volatile uint32_t *)0xF8000044) // Port Set Output Register #define FGPIOB_PCOR (*(volatile uint32_t *)0xF8000048) // Port Clear Output Register #define FGPIOB_PTOR (*(volatile uint32_t *)0xF800004C) // Port Toggle Output Register #define FGPIOB_PDIR (*(volatile uint32_t *)0xF8000050) // Port Data Input Register #define FGPIOB_PDDR (*(volatile uint32_t *)0xF8000054) // Port Data Direction Register #define FGPIOC_PDOR (*(volatile uint32_t *)0xF8000080) // Port Data Output Register #define FGPIOC_PSOR (*(volatile uint32_t *)0xF8000084) // Port Set Output Register #define FGPIOC_PCOR (*(volatile uint32_t *)0xF8000088) // Port Clear Output Register #define FGPIOC_PTOR (*(volatile uint32_t *)0xF800008C) // Port Toggle Output Register #define FGPIOC_PDIR (*(volatile uint32_t *)0xF8000090) // Port Data Input Register #define FGPIOC_PDDR (*(volatile uint32_t *)0xF8000094) // Port Data Direction Register #define FGPIOD_PDOR (*(volatile uint32_t *)0xF80000C0) // Port Data Output Register #define FGPIOD_PSOR (*(volatile uint32_t *)0xF80000C4) // Port Set Output Register #define FGPIOD_PCOR (*(volatile uint32_t *)0xF80000C8) // Port Clear Output Register #define FGPIOD_PTOR (*(volatile uint32_t *)0xF80000CC) // Port Toggle Output Register #define FGPIOD_PDIR (*(volatile uint32_t *)0xF80000D0) // Port Data Input Register #define FGPIOD_PDDR (*(volatile uint32_t *)0xF80000D4) // Port Data Direction Register #define FGPIOE_PDOR (*(volatile uint32_t *)0xF8000100) // Port Data Output Register #define FGPIOE_PSOR (*(volatile uint32_t *)0xF8000104) // Port Set Output Register #define FGPIOE_PCOR (*(volatile uint32_t *)0xF8000108) // Port Clear Output Register #define FGPIOE_PTOR (*(volatile uint32_t *)0xF800010C) // Port Toggle Output Register #define FGPIOE_PDIR (*(volatile uint32_t *)0xF8000110) // Port Data Input Register #define FGPIOE_PDDR (*(volatile uint32_t *)0xF8000114) // Port Data Direction Register #endif // Touch sense input (TSI) #if defined(HAS_KINETIS_TSI) #define TSI0_GENCS (*(volatile uint32_t *)0x40045000) // General Control and Status Register #define TSI_GENCS_LPCLKS ((uint32_t)0x10000000) // #define TSI_GENCS_LPSCNITV(n) (((n) & 15) << 24) // #define TSI_GENCS_NSCN(n) (((n) & 31) << 19) // #define TSI_GENCS_PS(n) (((n) & 7) << 16) // #define TSI_GENCS_EOSF ((uint32_t)0x00008000) // #define TSI_GENCS_OUTRGF ((uint32_t)0x00004000) // #define TSI_GENCS_EXTERF ((uint32_t)0x00002000) // #define TSI_GENCS_OVRF ((uint32_t)0x00001000) // #define TSI_GENCS_SCNIP ((uint32_t)0x00000200) // #define TSI_GENCS_SWTS ((uint32_t)0x00000100) // #define TSI_GENCS_TSIEN ((uint32_t)0x00000080) // #define TSI_GENCS_TSIIE ((uint32_t)0x00000040) // #define TSI_GENCS_ERIE ((uint32_t)0x00000020) // #define TSI_GENCS_ESOR ((uint32_t)0x00000010) // #define TSI_GENCS_STM ((uint32_t)0x00000002) // #define TSI_GENCS_STPE ((uint32_t)0x00000001) // #define TSI0_SCANC (*(volatile uint32_t *)0x40045004) // SCAN Control Register #define TSI_SCANC_REFCHRG(n) (((n) & 15) << 24) // #define TSI_SCANC_EXTCHRG(n) (((n) & 15) << 16) // #define TSI_SCANC_SMOD(n) (((n) & 255) << 8) // #define TSI_SCANC_AMCLKS(n) (((n) & 3) << 3) // #define TSI_SCANC_AMPSC(n) (((n) & 7) << 0) // #define TSI0_PEN (*(volatile uint32_t *)0x40045008) // Pin Enable Register #define TSI0_WUCNTR (*(volatile uint32_t *)0x4004500C) // Wake-Up Channel Counter Register #define TSI0_CNTR1 (*(volatile uint32_t *)0x40045100) // Counter Register #define TSI0_CNTR3 (*(volatile uint32_t *)0x40045104) // Counter Register #define TSI0_CNTR5 (*(volatile uint32_t *)0x40045108) // Counter Register #define TSI0_CNTR7 (*(volatile uint32_t *)0x4004510C) // Counter Register #define TSI0_CNTR9 (*(volatile uint32_t *)0x40045110) // Counter Register #define TSI0_CNTR11 (*(volatile uint32_t *)0x40045114) // Counter Register #define TSI0_CNTR13 (*(volatile uint32_t *)0x40045118) // Counter Register #define TSI0_CNTR15 (*(volatile uint32_t *)0x4004511C) // Counter Register #define TSI0_THRESHOLD (*(volatile uint32_t *)0x40045120) // Low Power Channel Threshold Register #elif defined(HAS_KINETIS_TSI_LITE) #define TSI0_GENCS (*(volatile uint32_t *)0x40045000) // General Control and Status #define TSI_GENCS_OUTRGF ((uint32_t)0x80000000) // Out of Range Flag #define TSI_GENCS_ESOR ((uint32_t)0x10000000) // End-of-scan or Out-of-Range Interrupt Selection #define TSI_GENCS_MODE(n) (((n) & 15) << 24) // analog modes & status #define TSI_GENCS_REFCHRG(n) (((n) & 7) << 21) // reference charge and discharge current #define TSI_GENCS_DVOLT(n) (((n) & 3) << 19) // voltage rails #define TSI_GENCS_EXTCHRG(n) (((n) & 7) << 16) // electrode charge and discharge current #define TSI_GENCS_PS(n) (((n) & 7) << 13) // prescaler #define TSI_GENCS_NSCN(n) (((n) & 31) << 8) // scan number #define TSI_GENCS_TSIEN ((uint32_t)0x00000080) // Enable #define TSI_GENCS_TSIIEN ((uint32_t)0x00000040) // Interrupt Enable #define TSI_GENCS_STPE ((uint32_t)0x00000020) // STOP Enable #define TSI_GENCS_STM ((uint32_t)0x00000010) // Trigger Mode #define TSI_GENCS_SCNIP ((uint32_t)0x00000008) // Scan In Progress Status #define TSI_GENCS_EOSF ((uint32_t)0x00000004) // End of Scan Flag #define TSI_GENCS_CURSW ((uint32_t)0x00000002) // current sources swapped #define TSI0_DATA (*(volatile uint32_t *)0x40045004) // Data #define TSI_DATA_TSICH(n) (((n) & 15) << 28) // channel #define TSI_DATA_DMAEN ((uint32_t)0x00800000) // DMA Transfer Enabled #define TSI_DATA_SWTS ((uint32_t)0x00400000) // Software Trigger Start #define TSI_DATA_TSICNT(n) (((n) & 65535) << 0) // Conversion Counter Value #define TSI0_TSHD (*(volatile uint32_t *)0x40045008) // Threshold #define TSI_TSHD_THRESH(n) (((n) & 65535) << 16) // High wakeup threshold #define TSI_TSHD_THRESL(n) (((n) & 65535) << 0) // Low wakeup threshold #endif // Nested Vectored Interrupt Controller, Table 3-4 & ARMv7 ref, appendix B3.4 (page 750) #define NVIC_STIR (*(volatile uint32_t *)0xE000EF00) #define NVIC_ENABLE_IRQ(n) (*((volatile uint32_t *)0xE000E100 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_DISABLE_IRQ(n) (*((volatile uint32_t *)0xE000E180 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_SET_PENDING(n) (*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_CLEAR_PENDING(n) (*((volatile uint32_t *)0xE000E280 + ((n) >> 5)) = (1 << ((n) & 31))) #define NVIC_IS_ENABLED(n) (*((volatile uint32_t *)0xE000E100 + ((n) >> 5)) & (1 << ((n) & 31))) #define NVIC_IS_PENDING(n) (*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) & (1 << ((n) & 31))) #define NVIC_IS_ACTIVE(n) (*((volatile uint32_t *)0xE000E300 + ((n) >> 5)) & (1 << ((n) & 31))) #ifdef KINETISK #define NVIC_TRIGGER_IRQ(n) NVIC_STIR=(n) #else #define NVIC_TRIGGER_IRQ(n) NVIC_SET_PENDING(n) #endif #define NVIC_ISER0 (*(volatile uint32_t *)0xE000E100) #define NVIC_ISER1 (*(volatile uint32_t *)0xE000E104) #define NVIC_ISER2 (*(volatile uint32_t *)0xE000E108) #define NVIC_ISER3 (*(volatile uint32_t *)0xE000E10C) #define NVIC_ICER0 (*(volatile uint32_t *)0xE000E180) #define NVIC_ICER1 (*(volatile uint32_t *)0xE000E184) #define NVIC_ICER2 (*(volatile uint32_t *)0xE000E188) #define NVIC_ICER3 (*(volatile uint32_t *)0xE000E18C) // 0 = highest priority // Cortex-M4: 0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240 // Cortex-M0: 0,64,128,192 #ifdef KINETISK #define NVIC_SET_PRIORITY(irqnum, priority) (*((volatile uint8_t *)0xE000E400 + (irqnum)) = (uint8_t)(priority)) #define NVIC_GET_PRIORITY(irqnum) (*((uint8_t *)0xE000E400 + (irqnum))) #else #define NVIC_SET_PRIORITY(irqnum, priority) (*((uint32_t *)0xE000E400 + ((irqnum) >> 2)) = (*((uint32_t *)0xE000E400 + ((irqnum) >> 2)) & (~(0xFF << (8 * ((irqnum) & 3))))) | (((priority) & 0xFF) << (8 * ((irqnum) & 3)))) #define NVIC_GET_PRIORITY(irqnum) (*((uint32_t *)0xE000E400 + ((irqnum) >> 2)) >> (8 * ((irqnum) & 3)) & 255) #endif #define __disable_irq() __asm__ volatile("CPSID i":::"memory"); #define __enable_irq() __asm__ volatile("CPSIE i":::"memory"); // System Control Space (SCS), ARMv7 ref manual, B3.2, page 708 #define SCB_CPUID (*(const uint32_t *)0xE000ED00) // CPUID Base Register #define SCB_ICSR (*(volatile uint32_t *)0xE000ED04) // Interrupt Control and State #define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) #define SCB_VTOR (*(volatile uint32_t *)0xE000ED08) // Vector Table Offset #define SCB_AIRCR (*(volatile uint32_t *)0xE000ED0C) // Application Interrupt and Reset Control #define SCB_SCR (*(volatile uint32_t *)0xE000ED10) // System Control Register #define SCB_SCR_SEVONPEND ((uint8_t)0x10) // Send Event on Pending bit #define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) // Sleep or Deep Sleep #define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) // Sleep-on-exit #define SCB_CCR (*(volatile uint32_t *)0xE000ED14) // Configuration and Control #define SCB_SHPR1 (*(volatile uint32_t *)0xE000ED18) // System Handler Priority Register 1 #define SCB_SHPR2 (*(volatile uint32_t *)0xE000ED1C) // System Handler Priority Register 2 #define SCB_SHPR3 (*(volatile uint32_t *)0xE000ED20) // System Handler Priority Register 3 #define SCB_SHCSR (*(volatile uint32_t *)0xE000ED24) // System Handler Control and State #define SCB_CFSR (*(volatile uint32_t *)0xE000ED28) // Configurable Fault Status Register #define SCB_HFSR (*(volatile uint32_t *)0xE000ED2C) // HardFault Status #define SCB_DFSR (*(volatile uint32_t *)0xE000ED30) // Debug Fault Status #define SCB_MMFAR (*(volatile uint32_t *)0xE000ED34) // MemManage Fault Address #define SCB_BFAR (*(volatile uint32_t *)0xE000ED38) // Bus Fault Address #define SCB_AFAR (*(volatile uint32_t *)0xE000ED3C) // Aux Fault Address #define SCB_CPACR (*(volatile uint32_t *)0xE000ED88) // Coprocessor Access Control #define SCB_FPCCR (*(volatile uint32_t *)0xE000EF34) // FP Context Control #define SCB_FPCAR (*(volatile uint32_t *)0xE000EF38) // FP Context Address #define SCB_FPDSCR (*(volatile uint32_t *)0xE000EF3C) // FP Default Status Control #define SCB_MVFR0 (*(volatile uint32_t *)0xE000EF40) // Media & FP Feature 0 #define SCB_MVFR1 (*(volatile uint32_t *)0xE000EF44) // Media & FP Feature 1 #define SCB_MVFR2 (*(volatile uint32_t *)0xE000EF48) // Media & FP Feature 2 #define SYST_CSR (*(volatile uint32_t *)0xE000E010) // SysTick Control and Status #define SYST_CSR_COUNTFLAG ((uint32_t)0x00010000) #define SYST_CSR_CLKSOURCE ((uint32_t)0x00000004) #define SYST_CSR_TICKINT ((uint32_t)0x00000002) #define SYST_CSR_ENABLE ((uint32_t)0x00000001) #define SYST_RVR (*(volatile uint32_t *)0xE000E014) // SysTick Reload Value Register #define SYST_CVR (*(volatile uint32_t *)0xE000E018) // SysTick Current Value Register #define SYST_CALIB (*(const uint32_t *)0xE000E01C) // SysTick Calibration Value #define ARM_DEMCR (*(volatile uint32_t *)0xE000EDFC) // Debug Exception and Monitor Control #define ARM_DEMCR_TRCENA (1 << 24) // Enable debugging & monitoring blocks #define ARM_DWT_CTRL (*(volatile uint32_t *)0xE0001000) // DWT control register #define ARM_DWT_CTRL_CYCCNTENA (1 << 0) // Enable cycle count #define ARM_DWT_CYCCNT (*(volatile uint32_t *)0xE0001004) // Cycle count register #ifdef __cplusplus extern "C" { #endif extern int nvic_execution_priority(void); #if defined(HAS_KINETIS_HSRUN) && F_CPU > 120000000 extern int kinetis_hsrun_disable(void); extern int kinetis_hsrun_enable(void); #else __attribute__((always_inline)) static inline int kinetis_hsrun_disable(void) { return 0; } __attribute__((always_inline)) static inline int kinetis_hsrun_enable(void) { return 0; } #endif extern void nmi_isr(void); extern void hard_fault_isr(void); extern void memmanage_fault_isr(void); extern void bus_fault_isr(void); extern void usage_fault_isr(void); extern void svcall_isr(void); extern void debugmonitor_isr(void); extern void pendablesrvreq_isr(void); extern void systick_isr(void); extern void dma_ch0_isr(void); extern void dma_ch1_isr(void); extern void dma_ch2_isr(void); extern void dma_ch3_isr(void); extern void dma_ch4_isr(void); extern void dma_ch5_isr(void); extern void dma_ch6_isr(void); extern void dma_ch7_isr(void); extern void dma_ch8_isr(void); extern void dma_ch9_isr(void); extern void dma_ch10_isr(void); extern void dma_ch11_isr(void); extern void dma_ch12_isr(void); extern void dma_ch13_isr(void); extern void dma_ch14_isr(void); extern void dma_ch15_isr(void); extern void dma_error_isr(void); extern void mcm_isr(void); extern void randnum_isr(void); extern void flash_cmd_isr(void); extern void flash_error_isr(void); extern void low_voltage_isr(void); extern void wakeup_isr(void); extern void watchdog_isr(void); extern void i2c0_isr(void); extern void i2c1_isr(void); extern void i2c2_isr(void); extern void i2c3_isr(void); extern void spi0_isr(void); extern void spi1_isr(void); extern void spi2_isr(void); extern void sdhc_isr(void); extern void enet_timer_isr(void); extern void enet_tx_isr(void); extern void enet_rx_isr(void); extern void enet_error_isr(void); extern void can0_message_isr(void); extern void can0_bus_off_isr(void); extern void can0_error_isr(void); extern void can0_tx_warn_isr(void); extern void can0_rx_warn_isr(void); extern void can0_wakeup_isr(void); extern void can1_message_isr(void); extern void can1_bus_off_isr(void); extern void can1_error_isr(void); extern void can1_tx_warn_isr(void); extern void can1_rx_warn_isr(void); extern void can1_wakeup_isr(void); extern void i2s0_tx_isr(void); extern void i2s0_rx_isr(void); extern void i2s0_isr(void); extern void uart0_lon_isr(void); extern void uart0_status_isr(void); extern void uart0_error_isr(void); extern void uart1_status_isr(void); extern void uart1_error_isr(void); extern void uart2_status_isr(void); extern void uart2_error_isr(void); extern void uart3_status_isr(void); extern void uart3_error_isr(void); extern void uart4_status_isr(void); extern void uart4_error_isr(void); extern void uart5_status_isr(void); extern void uart5_error_isr(void); extern void lpuart0_status_isr(void); extern void adc0_isr(void); extern void adc1_isr(void); extern void cmp0_isr(void); extern void cmp1_isr(void); extern void cmp2_isr(void); extern void cmp3_isr(void); extern void ftm0_isr(void); extern void ftm1_isr(void); extern void ftm2_isr(void); extern void ftm3_isr(void); extern void tpm0_isr(void); extern void tpm1_isr(void); extern void tpm2_isr(void); extern void cmt_isr(void); extern void rtc_alarm_isr(void); extern void rtc_seconds_isr(void); extern void pit0_isr(void); extern void pit1_isr(void); extern void pit2_isr(void); extern void pit3_isr(void); extern void pit_isr(void); extern void pdb_isr(void); extern void usb_isr(void); extern void usb_charge_isr(void); extern void usbhs_isr(void); extern void usbhs_phy_isr(void); extern void dac0_isr(void); extern void dac1_isr(void); extern void tsi0_isr(void); extern void mcg_isr(void); extern void lptmr_isr(void); extern void porta_isr(void); extern void portb_isr(void); extern void portc_isr(void); extern void portd_isr(void); extern void porte_isr(void); extern void portcd_isr(void); extern void software_isr(void); extern void (* _VectorsRam[NVIC_NUM_INTERRUPTS+16])(void); extern void (* const _VectorsFlash[NVIC_NUM_INTERRUPTS+16])(void); #ifdef __cplusplus } #endif #undef BEGIN_ENUM #undef END_ENUM #endif