/* Teensyduino Core Library * http://www.pjrc.com/teensy/ * Copyright (c) 2017 PJRC.COM, LLC. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * 1. The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * 2. If the Software is incorporated into a build system that allows * selection among a list of target devices, then similar target * devices manufactured by PJRC.COM must be included in the list of * target devices and selectable in the same manner. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Trying to understand this rather complex code? * * Kevin Cuzner wrote a simpler version, and a great blog article: * http://kevincuzner.com/2014/12/12/teensy-3-1-bare-metal-writing-a-usb-driver/ * https://github.com/kcuzner/teensy-oscilloscope/blob/master/scope-teensy/src/usb.c * * Andy Payne wrote another relatively simple USB example for Freescale Kinetis * https://github.com/payne92/bare-metal-arm */ #include "usb_dev.h" #if F_CPU >= 20000000 && defined(NUM_ENDPOINTS) #include "kinetis.h" //#include "HardwareSerial.h" #include "usb_mem.h" #include // for memset // This code has a known bug with compiled with -O2 optimization on gcc 5.4.1 // https://forum.pjrc.com/threads/53574-Teensyduino-1-43-Beta-2?p=186177&viewfull=1#post186177 #if defined(__MKL26Z64__) #pragma GCC optimize ("Os") #else #pragma GCC optimize ("O3") #endif // buffer descriptor table typedef struct { uint32_t desc; void * addr; } bdt_t; __attribute__ ((section(".usbdescriptortable"), used)) static bdt_t table[(NUM_ENDPOINTS+1)*4]; static usb_packet_t *rx_first[NUM_ENDPOINTS]; static usb_packet_t *rx_last[NUM_ENDPOINTS]; static usb_packet_t *tx_first[NUM_ENDPOINTS]; static usb_packet_t *tx_last[NUM_ENDPOINTS]; uint16_t usb_rx_byte_count_data[NUM_ENDPOINTS]; static uint8_t tx_state[NUM_ENDPOINTS]; #define TX_STATE_BOTH_FREE_EVEN_FIRST 0 #define TX_STATE_BOTH_FREE_ODD_FIRST 1 #define TX_STATE_EVEN_FREE 2 #define TX_STATE_ODD_FREE 3 #define TX_STATE_NONE_FREE_EVEN_FIRST 4 #define TX_STATE_NONE_FREE_ODD_FIRST 5 #define BDT_OWN 0x80 #define BDT_DATA1 0x40 #define BDT_DATA0 0x00 #define BDT_DTS 0x08 #define BDT_STALL 0x04 #define BDT_PID(n) (((n) >> 2) & 15) #define BDT_DESC(count, data) (BDT_OWN | BDT_DTS \ | ((data) ? BDT_DATA1 : BDT_DATA0) \ | ((count) << 16)) #define TX 1 #define RX 0 #define ODD 1 #define EVEN 0 #define DATA0 0 #define DATA1 1 #define index(endpoint, tx, odd) (((endpoint) << 2) | ((tx) << 1) | (odd)) #define stat2bufferdescriptor(stat) (table + ((stat) >> 2)) static union { struct { union { struct { uint8_t bmRequestType; uint8_t bRequest; }; uint16_t wRequestAndType; }; uint16_t wValue; uint16_t wIndex; uint16_t wLength; }; struct { uint32_t word1; uint32_t word2; }; } setup; #define GET_STATUS 0 #define CLEAR_FEATURE 1 #define SET_FEATURE 3 #define SET_ADDRESS 5 #define GET_DESCRIPTOR 6 #define SET_DESCRIPTOR 7 #define GET_CONFIGURATION 8 #define SET_CONFIGURATION 9 #define GET_INTERFACE 10 #define SET_INTERFACE 11 #define SYNCH_FRAME 12 // SETUP always uses a DATA0 PID for the data field of the SETUP transaction. // transactions in the data phase start with DATA1 and toggle (figure 8-12, USB1.1) // Status stage uses a DATA1 PID. static uint8_t ep0_rx0_buf[EP0_SIZE] __attribute__ ((aligned (4))); static uint8_t ep0_rx1_buf[EP0_SIZE] __attribute__ ((aligned (4))); static const uint8_t *ep0_tx_ptr = NULL; static uint16_t ep0_tx_len; static uint8_t ep0_tx_bdt_bank = 0; static uint8_t ep0_tx_data_toggle = 0; uint8_t usb_rx_memory_needed = 0; volatile uint8_t usb_configuration = 0; volatile uint8_t usb_reboot_timer = 0; static void endpoint0_stall(void) { USB0_ENDPT0 = USB_ENDPT_EPSTALL | USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK; } static void endpoint0_transmit(const void *data, uint32_t len) { #if 0 serial_print("tx0:"); serial_phex32((uint32_t)data); serial_print(","); serial_phex16(len); serial_print(ep0_tx_bdt_bank ? ", odd" : ", even"); serial_print(ep0_tx_data_toggle ? ", d1\n" : ", d0\n"); #endif table[index(0, TX, ep0_tx_bdt_bank)].addr = (void *)data; table[index(0, TX, ep0_tx_bdt_bank)].desc = BDT_DESC(len, ep0_tx_data_toggle); ep0_tx_data_toggle ^= 1; ep0_tx_bdt_bank ^= 1; } static uint8_t reply_buffer[8]; static void usb_setup(void) { const uint8_t *data = NULL; uint32_t datalen = 0; const usb_descriptor_list_t *list; uint32_t size; volatile uint8_t *reg; uint8_t epconf; const uint8_t *cfg; int i; switch (setup.wRequestAndType) { case 0x0500: // SET_ADDRESS break; case 0x0900: // SET_CONFIGURATION //serial_print("configure\n"); usb_configuration = setup.wValue; reg = &USB0_ENDPT1; cfg = usb_endpoint_config_table; // clear all BDT entries, free any allocated memory... for (i=4; i < (NUM_ENDPOINTS+1)*4; i++) { if (table[i].desc & BDT_OWN) { usb_free((usb_packet_t *)((uint8_t *)(table[i].addr) - 8)); } } // free all queued packets for (i=0; i < NUM_ENDPOINTS; i++) { usb_packet_t *p, *n; p = rx_first[i]; while (p) { n = p->next; usb_free(p); p = n; } rx_first[i] = NULL; rx_last[i] = NULL; p = tx_first[i]; while (p) { n = p->next; usb_free(p); p = n; } tx_first[i] = NULL; tx_last[i] = NULL; usb_rx_byte_count_data[i] = 0; switch (tx_state[i]) { case TX_STATE_EVEN_FREE: case TX_STATE_NONE_FREE_EVEN_FIRST: tx_state[i] = TX_STATE_BOTH_FREE_EVEN_FIRST; break; case TX_STATE_ODD_FREE: case TX_STATE_NONE_FREE_ODD_FIRST: tx_state[i] = TX_STATE_BOTH_FREE_ODD_FIRST; break; default: break; } } usb_rx_memory_needed = 0; for (i=1; i <= NUM_ENDPOINTS; i++) { epconf = *cfg++; *reg = epconf; reg += 4; #ifdef AUDIO_INTERFACE if (i == AUDIO_RX_ENDPOINT) { table[index(i, RX, EVEN)].addr = usb_audio_receive_buffer; table[index(i, RX, EVEN)].desc = (AUDIO_RX_SIZE<<16) | BDT_OWN; table[index(i, RX, ODD)].addr = usb_audio_receive_buffer; table[index(i, RX, ODD)].desc = (AUDIO_RX_SIZE<<16) | BDT_OWN; } else #endif if (epconf & USB_ENDPT_EPRXEN) { usb_packet_t *p; p = usb_malloc(); if (p) { table[index(i, RX, EVEN)].addr = p->buf; table[index(i, RX, EVEN)].desc = BDT_DESC(64, 0); } else { table[index(i, RX, EVEN)].desc = 0; usb_rx_memory_needed++; } p = usb_malloc(); if (p) { table[index(i, RX, ODD)].addr = p->buf; table[index(i, RX, ODD)].desc = BDT_DESC(64, 1); } else { table[index(i, RX, ODD)].desc = 0; usb_rx_memory_needed++; } } table[index(i, TX, EVEN)].desc = 0; table[index(i, TX, ODD)].desc = 0; #ifdef AUDIO_INTERFACE if (i == AUDIO_SYNC_ENDPOINT) { table[index(i, TX, EVEN)].addr = &usb_audio_sync_feedback; table[index(i, TX, EVEN)].desc = (3<<16) | BDT_OWN; } #endif } break; case 0x0880: // GET_CONFIGURATION reply_buffer[0] = usb_configuration; datalen = 1; data = reply_buffer; break; case 0x0080: // GET_STATUS (device) reply_buffer[0] = 0; reply_buffer[1] = 0; datalen = 2; data = reply_buffer; break; case 0x0082: // GET_STATUS (endpoint) i = setup.wIndex & 0x7F; if (i > NUM_ENDPOINTS) { // TODO: do we need to handle IN vs OUT here? endpoint0_stall(); return; } reply_buffer[0] = 0; reply_buffer[1] = 0; if (*(uint8_t *)(&USB0_ENDPT0 + i * 4) & 0x02) reply_buffer[0] = 1; data = reply_buffer; datalen = 2; break; case 0x0102: // CLEAR_FEATURE (endpoint) i = setup.wIndex & 0x7F; if (i > NUM_ENDPOINTS || setup.wValue != 0) { // TODO: do we need to handle IN vs OUT here? endpoint0_stall(); return; } (*(uint8_t *)(&USB0_ENDPT0 + i * 4)) &= ~0x02; // TODO: do we need to clear the data toggle here? break; case 0x0302: // SET_FEATURE (endpoint) i = setup.wIndex & 0x7F; if (i > NUM_ENDPOINTS || setup.wValue != 0) { // TODO: do we need to handle IN vs OUT here? endpoint0_stall(); return; } (*(uint8_t *)(&USB0_ENDPT0 + i * 4)) |= 0x02; // TODO: do we need to clear the data toggle here? break; case 0x0680: // GET_DESCRIPTOR case 0x0681: //serial_print("desc:"); //serial_phex16(setup.wValue); //serial_print("\n"); for (list = usb_descriptor_list; 1; list++) { if (list->addr == NULL) break; //if (setup.wValue == list->wValue && //(setup.wIndex == list->wIndex) || ((setup.wValue >> 8) == 3)) { if (setup.wValue == list->wValue && setup.wIndex == list->wIndex) { data = list->addr; if ((setup.wValue >> 8) == 3) { // for string descriptors, use the descriptor's // length field, allowing runtime configured // length. datalen = *(list->addr); } else { datalen = list->length; } #if 0 serial_print("Desc found, "); serial_phex32((uint32_t)data); serial_print(","); serial_phex16(datalen); serial_print(","); serial_phex(data[0]); serial_phex(data[1]); serial_phex(data[2]); serial_phex(data[3]); serial_phex(data[4]); serial_phex(data[5]); serial_print("\n"); #endif goto send; } } //serial_print("desc: not found\n"); endpoint0_stall(); return; case 0x2221: // CDC_SET_CONTROL_LINE_STATE switch (setup.wIndex) { #ifdef CDC_STATUS_INTERFACE case CDC_STATUS_INTERFACE: usb_cdc_line_rtsdtr_millis = systick_millis_count; usb_cdc_line_rtsdtr = setup.wValue; break; #endif } //serial_print("set control line state\n"); break; #ifdef CDC_STATUS_INTERFACE case 0x2321: // CDC_SEND_BREAK break; case 0x2021: // CDC_SET_LINE_CODING //serial_print("set coding, waiting...\n"); return; #endif #if defined(MTP_INTERFACE) case 0x64A1: // Cancel Request (PTP spec, 5.2.1, page 8) // TODO: required by PTP spec endpoint0_stall(); return; case 0x66A1: // Device Reset (PTP spec, 5.2.3, page 10) // TODO: required by PTP spec endpoint0_stall(); return; case 0x67A1: // Get Device Statis (PTP spec, 5.2.4, page 10) // For now, always respond with status ok. reply_buffer[0] = 0x4; reply_buffer[1] = 0; reply_buffer[2] = 0x01; reply_buffer[3] = 0x20; data = reply_buffer; datalen = 4; break; #endif // TODO: this does not work... why? #if defined(SEREMU_INTERFACE) || defined(KEYBOARD_INTERFACE) case 0x0921: // HID SET_REPORT //serial_print(":)\n"); return; case 0x0A21: // HID SET_IDLE break; // case 0xC940: #endif #if defined(AUDIO_INTERFACE) case 0x0B01: // SET_INTERFACE (alternate setting) if (setup.wIndex == AUDIO_INTERFACE+1) { usb_audio_transmit_setting = setup.wValue; if (usb_audio_transmit_setting > 0) { bdt_t *b = &table[index(AUDIO_TX_ENDPOINT, TX, EVEN)]; uint8_t state = tx_state[AUDIO_TX_ENDPOINT-1]; if (state) b++; if (!(b->desc & BDT_OWN)) { memset(usb_audio_transmit_buffer, 0, 176); b->addr = usb_audio_transmit_buffer; b->desc = (176 << 16) | BDT_OWN; tx_state[AUDIO_TX_ENDPOINT-1] = state ^ 1; } } } else if (setup.wIndex == AUDIO_INTERFACE+2) { usb_audio_receive_setting = setup.wValue; } else { endpoint0_stall(); return; } break; case 0x0A81: // GET_INTERFACE (alternate setting) datalen = 1; data = reply_buffer; if (setup.wIndex == AUDIO_INTERFACE+1) { reply_buffer[0] = usb_audio_transmit_setting; } else if (setup.wIndex == AUDIO_INTERFACE+2) { reply_buffer[0] = usb_audio_receive_setting; } else { endpoint0_stall(); return; } break; case 0x0121: // SET FEATURE case 0x0221: case 0x0321: case 0x0421: // handle these on the next packet. See usb_audio_set_feature() return; case 0x81A1: // GET FEATURE case 0x82A1: case 0x83A1: case 0x84A1: if (usb_audio_get_feature(&setup, reply_buffer, &datalen)) { data = reply_buffer; } else { endpoint0_stall(); return; } break; case 0x81A2: // GET_CUR (wValue=0, wIndex=interface, wLength=len) if (setup.wLength >= 3) { reply_buffer[0] = 44100 & 255; reply_buffer[1] = 44100 >> 8; reply_buffer[2] = 0; datalen = 3; data = reply_buffer; } else { endpoint0_stall(); return; } break; #endif #if defined(MULTITOUCH_INTERFACE) case 0x01A1: if (setup.wValue == 0x0300 && setup.wIndex == MULTITOUCH_INTERFACE) { reply_buffer[0] = MULTITOUCH_FINGERS; data = reply_buffer; datalen = 1; } else if (setup.wValue == 0x0100 && setup.wIndex == MULTITOUCH_INTERFACE) { memset(reply_buffer, 0, 8); data = reply_buffer; datalen = 8; } else { endpoint0_stall(); return; } break; #endif default: endpoint0_stall(); return; } send: //serial_print("setup send "); //serial_phex32(data); //serial_print(","); //serial_phex16(datalen); //serial_print("\n"); if (datalen > setup.wLength) datalen = setup.wLength; size = datalen; if (size > EP0_SIZE) size = EP0_SIZE; endpoint0_transmit(data, size); data += size; datalen -= size; if (datalen == 0 && size < EP0_SIZE) return; size = datalen; if (size > EP0_SIZE) size = EP0_SIZE; endpoint0_transmit(data, size); data += size; datalen -= size; if (datalen == 0 && size < EP0_SIZE) return; ep0_tx_ptr = data; ep0_tx_len = datalen; } //A bulk endpoint's toggle sequence is initialized to DATA0 when the endpoint //experiences any configuration event (configuration events are explained in //Sections 9.1.1.5 and 9.4.5). //Configuring a device or changing an alternate setting causes all of the status //and configuration values associated with endpoints in the affected interfaces //to be set to their default values. This includes setting the data toggle of //any endpoint using data toggles to the value DATA0. //For endpoints using data toggle, regardless of whether an endpoint has the //Halt feature set, a ClearFeature(ENDPOINT_HALT) request always results in the //data toggle being reinitialized to DATA0. // #define stat2bufferdescriptor(stat) (table + ((stat) >> 2)) static void usb_control(uint32_t stat) { bdt_t *b; uint32_t pid, size; uint8_t *buf; const uint8_t *data; b = stat2bufferdescriptor(stat); pid = BDT_PID(b->desc); //count = b->desc >> 16; buf = b->addr; //serial_print("pid:"); //serial_phex(pid); //serial_print(", count:"); //serial_phex(count); //serial_print("\n"); switch (pid) { case 0x0D: // Setup received from host //serial_print("PID=Setup\n"); //if (count != 8) ; // panic? // grab the 8 byte setup info setup.word1 = *(uint32_t *)(buf); setup.word2 = *(uint32_t *)(buf + 4); // give the buffer back b->desc = BDT_DESC(EP0_SIZE, DATA1); //table[index(0, RX, EVEN)].desc = BDT_DESC(EP0_SIZE, 1); //table[index(0, RX, ODD)].desc = BDT_DESC(EP0_SIZE, 1); // clear any leftover pending IN transactions ep0_tx_ptr = NULL; if (ep0_tx_data_toggle) { } //if (table[index(0, TX, EVEN)].desc & 0x80) { //serial_print("leftover tx even\n"); //} //if (table[index(0, TX, ODD)].desc & 0x80) { //serial_print("leftover tx odd\n"); //} table[index(0, TX, EVEN)].desc = 0; table[index(0, TX, ODD)].desc = 0; // first IN after Setup is always DATA1 ep0_tx_data_toggle = 1; #if 0 serial_print("bmRequestType:"); serial_phex(setup.bmRequestType); serial_print(", bRequest:"); serial_phex(setup.bRequest); serial_print(", wValue:"); serial_phex16(setup.wValue); serial_print(", wIndex:"); serial_phex16(setup.wIndex); serial_print(", len:"); serial_phex16(setup.wLength); serial_print("\n"); #endif // actually "do" the setup request usb_setup(); // unfreeze the USB, now that we're ready USB0_CTL = USB_CTL_USBENSOFEN; // clear TXSUSPENDTOKENBUSY bit break; case 0x01: // OUT transaction received from host case 0x02: //serial_print("PID=OUT\n"); if (setup.wRequestAndType == 0x2021 /*CDC_SET_LINE_CODING*/) { int i; uint8_t *dst = NULL; switch (setup.wIndex) { #ifdef CDC_STATUS_INTERFACE case CDC_STATUS_INTERFACE: dst = (uint8_t *)usb_cdc_line_coding; break; #endif } if (!dst) break; //serial_print("set line coding "); for (i=0; i<7; i++) { //serial_phex(*buf); *dst++ = *buf++; } //serial_phex32(usb_cdc_line_coding[0]); //serial_print("\n"); #ifdef CDC_STATUS_INTERFACE if (setup.wIndex == CDC_STATUS_INTERFACE && usb_cdc_line_coding[0] == 134) usb_reboot_timer = 15; #endif endpoint0_transmit(NULL, 0); } #ifdef KEYBOARD_INTERFACE if (setup.word1 == 0x02000921 && setup.word2 == ((1<<16)|KEYBOARD_INTERFACE)) { keyboard_leds = buf[0]; endpoint0_transmit(NULL, 0); } #endif #ifdef SEREMU_INTERFACE if (setup.word1 == 0x03000921 && setup.word2 == ((4<<16)|SEREMU_INTERFACE) && buf[0] == 0xA9 && buf[1] == 0x45 && buf[2] == 0xC2 && buf[3] == 0x6B) { usb_reboot_timer = 5; endpoint0_transmit(NULL, 0); } #endif #ifdef AUDIO_INTERFACE if (usb_audio_set_feature(&setup, buf)) { endpoint0_transmit(NULL, 0); } #endif // give the buffer back b->desc = BDT_DESC(EP0_SIZE, DATA1); break; case 0x09: // IN transaction completed to host //serial_print("PID=IN:"); //serial_phex(stat); //serial_print("\n"); // send remaining data, if any... data = ep0_tx_ptr; if (data) { size = ep0_tx_len; if (size > EP0_SIZE) size = EP0_SIZE; endpoint0_transmit(data, size); data += size; ep0_tx_len -= size; ep0_tx_ptr = (ep0_tx_len > 0 || size == EP0_SIZE) ? data : NULL; } if (setup.bRequest == 5 && setup.bmRequestType == 0) { setup.bRequest = 0; //serial_print("set address: "); //serial_phex16(setup.wValue); //serial_print("\n"); USB0_ADDR = setup.wValue; } break; //default: //serial_print("PID=unknown:"); //serial_phex(pid); //serial_print("\n"); } USB0_CTL = USB_CTL_USBENSOFEN; // clear TXSUSPENDTOKENBUSY bit } usb_packet_t *usb_rx(uint32_t endpoint) { usb_packet_t *ret; endpoint--; if (endpoint >= NUM_ENDPOINTS) return NULL; __disable_irq(); ret = rx_first[endpoint]; if (ret) { rx_first[endpoint] = ret->next; usb_rx_byte_count_data[endpoint] -= ret->len; } __enable_irq(); //serial_print("rx, epidx="); //serial_phex(endpoint); //serial_print(", packet="); //serial_phex32(ret); //serial_print("\n"); return ret; } static uint32_t usb_queue_byte_count(const usb_packet_t *p) { uint32_t count=0; __disable_irq(); for ( ; p; p = p->next) { count += p->len; } __enable_irq(); return count; } // TODO: make this an inline function... /* uint32_t usb_rx_byte_count(uint32_t endpoint) { endpoint--; if (endpoint >= NUM_ENDPOINTS) return 0; return usb_rx_byte_count_data[endpoint]; //return usb_queue_byte_count(rx_first[endpoint]); } */ uint32_t usb_tx_byte_count(uint32_t endpoint) { endpoint--; if (endpoint >= NUM_ENDPOINTS) return 0; return usb_queue_byte_count(tx_first[endpoint]); } // Discussion about using this function and USB transmit latency // https://forum.pjrc.com/threads/58663?p=223513&viewfull=1#post223513 // uint32_t usb_tx_packet_count(uint32_t endpoint) { const usb_packet_t *p; uint32_t count=0; endpoint--; if (endpoint >= NUM_ENDPOINTS) return 0; __disable_irq(); for (p = tx_first[endpoint]; p; p = p->next) count++; __enable_irq(); return count; } // Called from usb_free, but only when usb_rx_memory_needed > 0, indicating // receive endpoints are starving for memory. The intention is to give // endpoints needing receive memory priority over the user's code, which is // likely calling usb_malloc to obtain memory for transmitting. When the // user is creating data very quickly, their consumption could starve reception // without this prioritization. The packet buffer (input) is assigned to the // first endpoint needing memory. // void usb_rx_memory(usb_packet_t *packet) { unsigned int i; const uint8_t *cfg; cfg = usb_endpoint_config_table; //serial_print("rx_mem:"); __disable_irq(); for (i=1; i <= NUM_ENDPOINTS; i++) { #ifdef AUDIO_INTERFACE if (i == AUDIO_RX_ENDPOINT) continue; #endif if (*cfg++ & USB_ENDPT_EPRXEN) { if (table[index(i, RX, EVEN)].desc == 0) { table[index(i, RX, EVEN)].addr = packet->buf; table[index(i, RX, EVEN)].desc = BDT_DESC(64, 0); usb_rx_memory_needed--; __enable_irq(); //serial_phex(i); //serial_print(",even\n"); return; } if (table[index(i, RX, ODD)].desc == 0) { table[index(i, RX, ODD)].addr = packet->buf; table[index(i, RX, ODD)].desc = BDT_DESC(64, 1); usb_rx_memory_needed--; __enable_irq(); //serial_phex(i); //serial_print(",odd\n"); return; } } } __enable_irq(); // we should never reach this point. If we get here, it means // usb_rx_memory_needed was set greater than zero, but no memory // was actually needed. usb_rx_memory_needed = 0; usb_free(packet); return; } //#define index(endpoint, tx, odd) (((endpoint) << 2) | ((tx) << 1) | (odd)) //#define stat2bufferdescriptor(stat) (table + ((stat) >> 2)) void usb_tx(uint32_t endpoint, usb_packet_t *packet) { bdt_t *b = &table[index(endpoint, TX, EVEN)]; uint8_t next; endpoint--; if (endpoint >= NUM_ENDPOINTS) return; __disable_irq(); //serial_print("txstate="); //serial_phex(tx_state[endpoint]); //serial_print("\n"); switch (tx_state[endpoint]) { case TX_STATE_BOTH_FREE_EVEN_FIRST: next = TX_STATE_ODD_FREE; break; case TX_STATE_BOTH_FREE_ODD_FIRST: b++; next = TX_STATE_EVEN_FREE; break; case TX_STATE_EVEN_FREE: next = TX_STATE_NONE_FREE_ODD_FIRST; break; case TX_STATE_ODD_FREE: b++; next = TX_STATE_NONE_FREE_EVEN_FIRST; break; default: if (tx_first[endpoint] == NULL) { tx_first[endpoint] = packet; } else { tx_last[endpoint]->next = packet; } tx_last[endpoint] = packet; __enable_irq(); return; } tx_state[endpoint] = next; b->addr = packet->buf; b->desc = BDT_DESC(packet->len, ((uint32_t)b & 8) ? DATA1 : DATA0); __enable_irq(); } void usb_tx_isochronous(uint32_t endpoint, void *data, uint32_t len) { bdt_t *b = &table[index(endpoint, TX, EVEN)]; uint8_t next, state; endpoint--; if (endpoint >= NUM_ENDPOINTS) return; __disable_irq(); state = tx_state[endpoint]; if (state == 0) { next = 1; } else { b++; next = 0; } tx_state[endpoint] = next; b->addr = data; b->desc = (len << 16) | BDT_OWN; __enable_irq(); } void _reboot_Teensyduino_(void) { // TODO: initialize R0 with a code.... __asm__ volatile("bkpt"); } void usb_isr(void) { uint8_t status, stat, t; //serial_print("isr"); //status = USB0_ISTAT; //serial_phex(status); //serial_print("\n"); restart: status = USB0_ISTAT; if ((status & USB_ISTAT_SOFTOK /* 04 */ )) { if (usb_configuration) { t = usb_reboot_timer; if (t) { usb_reboot_timer = --t; if (!t) _reboot_Teensyduino_(); } #ifdef CDC_DATA_INTERFACE t = usb_cdc_transmit_flush_timer; if (t) { usb_cdc_transmit_flush_timer = --t; if (t == 0) usb_serial_flush_callback(); } #endif #ifdef SEREMU_INTERFACE t = usb_seremu_transmit_flush_timer; if (t) { usb_seremu_transmit_flush_timer = --t; if (t == 0) usb_seremu_flush_callback(); } #endif #ifdef MIDI_INTERFACE usb_midi_flush_output(); #endif #ifdef FLIGHTSIM_INTERFACE usb_flightsim_flush_callback(); #endif #ifdef MULTITOUCH_INTERFACE usb_touchscreen_update_callback(); #endif } USB0_ISTAT = USB_ISTAT_SOFTOK; } if ((status & USB_ISTAT_TOKDNE /* 08 */ )) { uint8_t endpoint; stat = USB0_STAT; //serial_print("token: ep="); //serial_phex(stat >> 4); //serial_print(stat & 0x08 ? ",tx" : ",rx"); //serial_print(stat & 0x04 ? ",odd\n" : ",even\n"); endpoint = stat >> 4; if (endpoint == 0) { usb_control(stat); } else { bdt_t *b = stat2bufferdescriptor(stat); usb_packet_t *packet = (usb_packet_t *)((uint8_t *)(b->addr) - 8); #if 0 serial_print("ep:"); serial_phex(endpoint); serial_print(", pid:"); serial_phex(BDT_PID(b->desc)); serial_print(((uint32_t)b & 8) ? ", odd" : ", even"); serial_print(", count:"); serial_phex(b->desc >> 16); serial_print("\n"); #endif endpoint--; // endpoint is index to zero-based arrays #ifdef AUDIO_INTERFACE if ((endpoint == AUDIO_TX_ENDPOINT-1) && (stat & 0x08)) { unsigned int len; len = usb_audio_transmit_callback(); if (len > 0) { b = (bdt_t *)((uint32_t)b ^ 8); b->addr = usb_audio_transmit_buffer; b->desc = (len << 16) | BDT_OWN; tx_state[endpoint] ^= 1; } } else if ((endpoint == AUDIO_RX_ENDPOINT-1) && !(stat & 0x08)) { usb_audio_receive_callback(b->desc >> 16); b->addr = usb_audio_receive_buffer; b->desc = (AUDIO_RX_SIZE << 16) | BDT_OWN; } else if ((endpoint == AUDIO_SYNC_ENDPOINT-1) && (stat & 0x08)) { b = (bdt_t *)((uint32_t)b ^ 8); b->addr = &usb_audio_sync_feedback; b->desc = (3 << 16) | BDT_OWN; tx_state[endpoint] ^= 1; } else #endif if (stat & 0x08) { // transmit usb_free(packet); packet = tx_first[endpoint]; if (packet) { //serial_print("tx packet\n"); tx_first[endpoint] = packet->next; b->addr = packet->buf; switch (tx_state[endpoint]) { case TX_STATE_BOTH_FREE_EVEN_FIRST: tx_state[endpoint] = TX_STATE_ODD_FREE; break; case TX_STATE_BOTH_FREE_ODD_FIRST: tx_state[endpoint] = TX_STATE_EVEN_FREE; break; case TX_STATE_EVEN_FREE: tx_state[endpoint] = TX_STATE_NONE_FREE_ODD_FIRST; break; case TX_STATE_ODD_FREE: tx_state[endpoint] = TX_STATE_NONE_FREE_EVEN_FIRST; break; default: break; } b->desc = BDT_DESC(packet->len, ((uint32_t)b & 8) ? DATA1 : DATA0); } else { //serial_print("tx no packet\n"); switch (tx_state[endpoint]) { case TX_STATE_BOTH_FREE_EVEN_FIRST: case TX_STATE_BOTH_FREE_ODD_FIRST: break; case TX_STATE_EVEN_FREE: tx_state[endpoint] = TX_STATE_BOTH_FREE_EVEN_FIRST; break; case TX_STATE_ODD_FREE: tx_state[endpoint] = TX_STATE_BOTH_FREE_ODD_FIRST; break; default: tx_state[endpoint] = ((uint32_t)b & 8) ? TX_STATE_ODD_FREE : TX_STATE_EVEN_FREE; break; } } } else { // receive packet->len = b->desc >> 16; if (packet->len > 0) { packet->index = 0; packet->next = NULL; if (rx_first[endpoint] == NULL) { //serial_print("rx 1st, epidx="); //serial_phex(endpoint); //serial_print(", packet="); //serial_phex32((uint32_t)packet); //serial_print("\n"); rx_first[endpoint] = packet; } else { //serial_print("rx Nth, epidx="); //serial_phex(endpoint); //serial_print(", packet="); //serial_phex32((uint32_t)packet); //serial_print("\n"); rx_last[endpoint]->next = packet; } rx_last[endpoint] = packet; usb_rx_byte_count_data[endpoint] += packet->len; // TODO: implement a per-endpoint maximum # of allocated // packets, so a flood of incoming data on 1 endpoint // doesn't starve the others if the user isn't reading // it regularly packet = usb_malloc(); if (packet) { b->addr = packet->buf; b->desc = BDT_DESC(64, ((uint32_t)b & 8) ? DATA1 : DATA0); } else { //serial_print("starving "); //serial_phex(endpoint + 1); b->desc = 0; usb_rx_memory_needed++; } } else { b->desc = BDT_DESC(64, ((uint32_t)b & 8) ? DATA1 : DATA0); } } } USB0_ISTAT = USB_ISTAT_TOKDNE; goto restart; } if (status & USB_ISTAT_USBRST /* 01 */ ) { //serial_print("reset\n"); // initialize BDT toggle bits USB0_CTL = USB_CTL_ODDRST; ep0_tx_bdt_bank = 0; // set up buffers to receive Setup and OUT packets table[index(0, RX, EVEN)].desc = BDT_DESC(EP0_SIZE, 0); table[index(0, RX, EVEN)].addr = ep0_rx0_buf; table[index(0, RX, ODD)].desc = BDT_DESC(EP0_SIZE, 0); table[index(0, RX, ODD)].addr = ep0_rx1_buf; table[index(0, TX, EVEN)].desc = 0; table[index(0, TX, ODD)].desc = 0; // activate endpoint 0 USB0_ENDPT0 = USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK; // clear all ending interrupts USB0_ERRSTAT = 0xFF; USB0_ISTAT = 0xFF; // set the address to zero during enumeration USB0_ADDR = 0; // enable other interrupts USB0_ERREN = 0xFF; USB0_INTEN = USB_INTEN_TOKDNEEN | USB_INTEN_SOFTOKEN | USB_INTEN_STALLEN | USB_INTEN_ERROREN | USB_INTEN_USBRSTEN | USB_INTEN_SLEEPEN; // is this necessary? USB0_CTL = USB_CTL_USBENSOFEN; return; } if ((status & USB_ISTAT_STALL /* 80 */ )) { //serial_print("stall:\n"); USB0_ENDPT0 = USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK; USB0_ISTAT = USB_ISTAT_STALL; } if ((status & USB_ISTAT_ERROR /* 02 */ )) { uint8_t err = USB0_ERRSTAT; USB0_ERRSTAT = err; //serial_print("err:"); //serial_phex(err); //serial_print("\n"); USB0_ISTAT = USB_ISTAT_ERROR; } if ((status & USB_ISTAT_SLEEP /* 10 */ )) { //serial_print("sleep\n"); USB0_ISTAT = USB_ISTAT_SLEEP; } } void usb_init(void) { int i; //serial_begin(BAUD2DIV(115200)); //serial_print("usb_init\n"); usb_init_serialnumber(); for (i=0; i <= NUM_ENDPOINTS*4; i++) { table[i].desc = 0; table[i].addr = 0; } // this basically follows the flowchart in the Kinetis // Quick Reference User Guide, Rev. 1, 03/2012, page 141 // assume 48 MHz clock already running // SIM - enable clock SIM_SCGC4 |= SIM_SCGC4_USBOTG; #ifdef HAS_KINETIS_MPU MPU_RGDAAC0 |= 0x03000000; #endif #if F_CPU == 180000000 || F_CPU == 216000000 || F_CPU == 256000000 // if using IRC48M, turn on the USB clock recovery hardware USB0_CLK_RECOVER_IRC_EN = USB_CLK_RECOVER_IRC_EN_IRC_EN | USB_CLK_RECOVER_IRC_EN_REG_EN; USB0_CLK_RECOVER_CTRL = USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN | USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN; #endif // reset USB module //USB0_USBTRC0 = USB_USBTRC_USBRESET; //while ((USB0_USBTRC0 & USB_USBTRC_USBRESET) != 0) ; // wait for reset to end // set desc table base addr USB0_BDTPAGE1 = ((uint32_t)table) >> 8; USB0_BDTPAGE2 = ((uint32_t)table) >> 16; USB0_BDTPAGE3 = ((uint32_t)table) >> 24; // clear all ISR flags USB0_ISTAT = 0xFF; USB0_ERRSTAT = 0xFF; USB0_OTGISTAT = 0xFF; //USB0_USBTRC0 |= 0x40; // undocumented bit // enable USB USB0_CTL = USB_CTL_USBENSOFEN; USB0_USBCTRL = 0; // enable reset interrupt USB0_INTEN = USB_INTEN_USBRSTEN; // enable interrupt in NVIC... NVIC_SET_PRIORITY(IRQ_USBOTG, 112); NVIC_ENABLE_IRQ(IRQ_USBOTG); // enable d+ pullup USB0_CONTROL = USB_CONTROL_DPPULLUPNONOTG; } #else // F_CPU < 20 MHz && defined(NUM_ENDPOINTS) void usb_init(void) { } #endif // F_CPU >= 20 MHz && defined(NUM_ENDPOINTS)