#include "usb_dev.h" #define USB_DESC_LIST_DEFINE #include "usb_desc.h" #include "usb_serial.h" #include "usb_seremu.h" #include "usb_rawhid.h" #include "usb_keyboard.h" #include "usb_mouse.h" #include "usb_joystick.h" #include "usb_flightsim.h" #include "usb_touch.h" #include "usb_midi.h" #include "usb_audio.h" #include "core_pins.h" // for delay() #include "avr/pgmspace.h" #include #include "debug/printf.h" //#define LOG_SIZE 20 //uint32_t transfer_log_head=0; //uint32_t transfer_log_count=0; //uint32_t transfer_log[LOG_SIZE]; // device mode, page 3155 typedef struct endpoint_struct endpoint_t; struct endpoint_struct { uint32_t config; uint32_t current; uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t reserved; uint32_t setup0; uint32_t setup1; transfer_t *first_transfer; transfer_t *last_transfer; void (*callback_function)(transfer_t *completed_transfer); uint32_t unused1; }; /*struct transfer_struct { uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t callback_param; };*/ #ifdef EXPERIMENTAL_INTERFACE uint8_t experimental_buffer[1152] __attribute__ ((section(".dmabuffers"), aligned(64))); #endif endpoint_t endpoint_queue_head[(NUM_ENDPOINTS+1)*2] __attribute__ ((used, aligned(4096))); transfer_t endpoint0_transfer_data __attribute__ ((used, aligned(32))); transfer_t endpoint0_transfer_ack __attribute__ ((used, aligned(32))); typedef union { struct { union { struct { uint8_t bmRequestType; uint8_t bRequest; }; uint16_t wRequestAndType; }; uint16_t wValue; uint16_t wIndex; uint16_t wLength; }; struct { uint32_t word1; uint32_t word2; }; uint64_t bothwords; } setup_t; static setup_t endpoint0_setupdata; static uint32_t endpoint0_notify_mask=0; static uint32_t endpointN_notify_mask=0; //static int reset_count=0; volatile uint8_t usb_configuration = 0; // non-zero when USB host as configured device volatile uint8_t usb_high_speed = 0; // non-zero if running at 480 Mbit/sec speed static uint8_t endpoint0_buffer[8]; static uint8_t sof_usage = 0; static uint8_t usb_reboot_timer = 0; extern uint8_t usb_descriptor_buffer[]; // defined in usb_desc.c extern const uint8_t usb_config_descriptor_480[]; extern const uint8_t usb_config_descriptor_12[]; void (*usb_timer0_callback)(void) = NULL; void (*usb_timer1_callback)(void) = NULL; static void isr(void); static void endpoint0_setup(uint64_t setupdata); static void endpoint0_transmit(const void *data, uint32_t len, int notify); static void endpoint0_receive(void *data, uint32_t len, int notify); static void endpoint0_complete(void); static void run_callbacks(endpoint_t *ep); FLASHMEM void usb_init(void) { // TODO: only enable when VBUS detected // TODO: return to low power mode when VBUS removed // TODO: protect PMU access with MPU PMU_REG_3P0 = PMU_REG_3P0_OUTPUT_TRG(0x0F) | PMU_REG_3P0_BO_OFFSET(6) | PMU_REG_3P0_ENABLE_LINREG; usb_init_serialnumber(); // assume PLL3 is already running - already done by usb_pll_start() in main.c CCM_CCGR6 |= CCM_CCGR6_USBOH3(CCM_CCGR_ON); // turn on clocks to USB peripheral printf("BURSTSIZE=%08lX\n", USB1_BURSTSIZE); //USB1_BURSTSIZE = USB_BURSTSIZE_TXPBURST(4) | USB_BURSTSIZE_RXPBURST(4); USB1_BURSTSIZE = 0x0404; printf("BURSTSIZE=%08lX\n", USB1_BURSTSIZE); printf("USB1_TXFILLTUNING=%08lX\n", USB1_TXFILLTUNING); // Before programming this register, the PHY clocks must be enabled in registers // USBPHYx_CTRLn and CCM_ANALOG_USBPHYx_PLL_480_CTRLn. //printf("USBPHY1_PWD=%08lX\n", USBPHY1_PWD); //printf("USBPHY1_TX=%08lX\n", USBPHY1_TX); //printf("USBPHY1_RX=%08lX\n", USBPHY1_RX); //printf("USBPHY1_CTRL=%08lX\n", USBPHY1_CTRL); //printf("USB1_USBMODE=%08lX\n", USB1_USBMODE); // turn on PLL3, wait for 480 MHz lock? // turn on CCM clock gates? CCGR6[CG0] #if 1 if ((USBPHY1_PWD & (USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF | USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV | USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS | USBPHY_PWD_TXPWDFS)) || (USB1_USBMODE & USB_USBMODE_CM_MASK)) { // USB controller is turned on from previous use // reset needed to turn it off & start from clean slate USBPHY1_CTRL_SET = USBPHY_CTRL_SFTRST; // USBPHY1_CTRL page 3292 USB1_USBCMD |= USB_USBCMD_RST; // reset controller int count=0; while (USB1_USBCMD & USB_USBCMD_RST) count++; NVIC_CLEAR_PENDING(IRQ_USB1); USBPHY1_CTRL_CLR = USBPHY_CTRL_SFTRST; // reset PHY //USB1_USBSTS = USB1_USBSTS; // TODO: is this needed? printf("USB reset took %d loops\n", count); //delay(10); //printf("\n"); //printf("USBPHY1_PWD=%08lX\n", USBPHY1_PWD); //printf("USBPHY1_TX=%08lX\n", USBPHY1_TX); //printf("USBPHY1_RX=%08lX\n", USBPHY1_RX); //printf("USBPHY1_CTRL=%08lX\n", USBPHY1_CTRL); //printf("USB1_USBMODE=%08lX\n", USB1_USBMODE); delay(25); } #endif // Device Controller Initialization, page 2351 (Rev 2, 12/2019) // USBCMD pg 3216 // USBSTS pg 3220 // USBINTR pg 3224 // DEVICEADDR pg 3227 // ENDPTLISTADDR 3229 // USBMODE pg 3244 // ENDPTSETUPSTAT 3245 // ENDPTPRIME pg 3246 // ENDPTFLUSH pg 3247 // ENDPTSTAT pg 3247 // ENDPTCOMPLETE 3248 // ENDPTCTRL0 pg 3249 USBPHY1_CTRL_CLR = USBPHY_CTRL_CLKGATE; USBPHY1_PWD = 0; //printf("USBPHY1_PWD=%08lX\n", USBPHY1_PWD); //printf("USBPHY1_CTRL=%08lX\n", USBPHY1_CTRL); USB1_USBMODE = USB_USBMODE_CM(2) | USB_USBMODE_SLOM; memset(endpoint_queue_head, 0, sizeof(endpoint_queue_head)); endpoint_queue_head[0].config = (64 << 16) | (1 << 15); endpoint_queue_head[1].config = (64 << 16); USB1_ENDPOINTLISTADDR = (uint32_t)&endpoint_queue_head; // Recommended: enable all device interrupts including: USBINT, USBERRINT, // Port Change Detect, USB Reset Received, DCSuspend. USB1_USBINTR = USB_USBINTR_UE | USB_USBINTR_UEE | /* USB_USBINTR_PCE | */ USB_USBINTR_URE | USB_USBINTR_SLE; //_VectorsRam[IRQ_USB1+16] = &isr; attachInterruptVector(IRQ_USB1, &isr); NVIC_ENABLE_IRQ(IRQ_USB1); //printf("USB1_ENDPTCTRL0=%08lX\n", USB1_ENDPTCTRL0); //printf("USB1_ENDPTCTRL1=%08lX\n", USB1_ENDPTCTRL1); //printf("USB1_ENDPTCTRL2=%08lX\n", USB1_ENDPTCTRL2); //printf("USB1_ENDPTCTRL3=%08lX\n", USB1_ENDPTCTRL3); USB1_USBCMD = USB_USBCMD_RS; //transfer_log_head = 0; //transfer_log_count = 0; //USB1_PORTSC1 |= USB_PORTSC1_PFSC; // force 12 Mbit/sec } static void isr(void) { //printf("*"); // Port control in device mode is only used for // status port reset, suspend, and current connect status. uint32_t status = USB1_USBSTS; USB1_USBSTS = status; // USB_USBSTS_SLI - set to 1 when enters a suspend state from an active state // USB_USBSTS_SRI - set at start of frame // USB_USBSTS_SRI - set when USB reset detected if (status & USB_USBSTS_UI) { //printf("data\n"); uint32_t setupstatus = USB1_ENDPTSETUPSTAT; //printf("USB1_ENDPTSETUPSTAT=%X\n", setupstatus); while (setupstatus) { USB1_ENDPTSETUPSTAT = setupstatus; setup_t s; do { USB1_USBCMD |= USB_USBCMD_SUTW; s.word1 = endpoint_queue_head[0].setup0; s.word2 = endpoint_queue_head[0].setup1; } while (!(USB1_USBCMD & USB_USBCMD_SUTW)); USB1_USBCMD &= ~USB_USBCMD_SUTW; //printf("setup %08lX %08lX\n", s.word1, s.word2); USB1_ENDPTFLUSH = (1<<16) | (1<<0); // page 3174 while (USB1_ENDPTFLUSH & ((1<<16) | (1<<0))) ; endpoint0_notify_mask = 0; endpoint0_setup(s.bothwords); setupstatus = USB1_ENDPTSETUPSTAT; // page 3175 } uint32_t completestatus = USB1_ENDPTCOMPLETE; if (completestatus) { USB1_ENDPTCOMPLETE = completestatus; //printf("USB1_ENDPTCOMPLETE=%lX\n", completestatus); if (completestatus & endpoint0_notify_mask) { endpoint0_notify_mask = 0; endpoint0_complete(); } completestatus &= endpointN_notify_mask; #if 1 if (completestatus) { // transmit: uint32_t tx = completestatus >> 16; while (tx) { int p=__builtin_ctz(tx); run_callbacks(endpoint_queue_head + p * 2 + 1); tx &= ~(1<= 3) { // shut off USB - easier to see results in protocol analyzer //USB1_USBCMD &= ~USB_USBCMD_RS; //printf("shut off USB\n"); //} } if (status & USB_USBSTS_TI0) { if (usb_timer0_callback != NULL) usb_timer0_callback(); } if (status & USB_USBSTS_TI1) { if (usb_timer1_callback != NULL) usb_timer1_callback(); } if (status & USB_USBSTS_PCI) { if (USB1_PORTSC1 & USB_PORTSC1_HSP) { //printf("port at 480 Mbit\n"); usb_high_speed = 1; } else { //printf("port at 12 Mbit\n"); usb_high_speed = 0; } } if (status & USB_USBSTS_SLI) { // page 3165 //printf("suspend\n"); } if (status & USB_USBSTS_UEI) { //printf("error\n"); } if ((USB1_USBINTR & USB_USBINTR_SRE) && (status & USB_USBSTS_SRI)) { //printf("sof %d\n", usb_reboot_timer); if (usb_reboot_timer) { if (--usb_reboot_timer == 0) { usb_stop_sof_interrupts(NUM_INTERFACE); asm("bkpt #251"); // run bootloader } } #ifdef MIDI_INTERFACE usb_midi_flush_output(); #endif #ifdef MULTITOUCH_INTERFACE usb_touchscreen_update_callback(); #endif #ifdef FLIGHTSIM_INTERFACE usb_flightsim_flush_output(); #endif } } void usb_start_sof_interrupts(int interface) { __disable_irq(); sof_usage |= (1 << interface); uint32_t intr = USB1_USBINTR; if (!(intr & USB_USBINTR_SRE)) { USB1_USBSTS = USB_USBSTS_SRI; // clear prior SOF before SOF IRQ enable USB1_USBINTR = intr | USB_USBINTR_SRE; } __enable_irq(); } void usb_stop_sof_interrupts(int interface) { sof_usage &= ~(1 << interface); if (sof_usage == 0) { USB1_USBINTR &= ~USB_USBINTR_SRE; } } /* struct transfer_struct { // table 55-60, pg 3159 uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t unused1; }; transfer_t endpoint0_transfer_data __attribute__ ((aligned(32)));; transfer_t endpoint0_transfer_ack __attribute__ ((aligned(32)));; */ static uint8_t reply_buffer[8]; static void endpoint0_setup(uint64_t setupdata) { setup_t setup; uint32_t endpoint, dir, ctrl; const usb_descriptor_list_t *list; setup.bothwords = setupdata; switch (setup.wRequestAndType) { case 0x0500: // SET_ADDRESS endpoint0_receive(NULL, 0, 0); USB1_DEVICEADDR = USB_DEVICEADDR_USBADR(setup.wValue) | USB_DEVICEADDR_USBADRA; return; case 0x0900: // SET_CONFIGURATION usb_configuration = setup.wValue; // configure all other endpoints #if defined(ENDPOINT2_CONFIG) USB1_ENDPTCTRL2 = ENDPOINT2_CONFIG; #endif #if defined(ENDPOINT3_CONFIG) USB1_ENDPTCTRL3 = ENDPOINT3_CONFIG; #endif #if defined(ENDPOINT4_CONFIG) USB1_ENDPTCTRL4 = ENDPOINT4_CONFIG; #endif #if defined(ENDPOINT5_CONFIG) USB1_ENDPTCTRL5 = ENDPOINT5_CONFIG; #endif #if defined(ENDPOINT6_CONFIG) USB1_ENDPTCTRL6 = ENDPOINT6_CONFIG; #endif #if defined(ENDPOINT7_CONFIG) USB1_ENDPTCTRL7 = ENDPOINT7_CONFIG; #endif #if defined(CDC_STATUS_INTERFACE) && defined(CDC_DATA_INTERFACE) usb_serial_configure(); #elif defined(SEREMU_INTERFACE) usb_seremu_configure(); #endif #if defined(CDC2_STATUS_INTERFACE) && defined(CDC2_DATA_INTERFACE) usb_serial2_configure(); #endif #if defined(CDC3_STATUS_INTERFACE) && defined(CDC3_DATA_INTERFACE) usb_serial3_configure(); #endif #if defined(RAWHID_INTERFACE) usb_rawhid_configure(); #endif #if defined(KEYBOARD_INTERFACE) usb_keyboard_configure(); #endif #if defined(MOUSE_INTERFACE) usb_mouse_configure(); #endif #if defined(FLIGHTSIM_INTERFACE) usb_flightsim_configure(); #endif #if defined(JOYSTICK_INTERFACE) usb_joystick_configure(); #endif #if defined(MULTITOUCH_INTERFACE) usb_touchscreen_configure(); #endif #if defined(MIDI_INTERFACE) usb_midi_configure(); #endif #if defined(AUDIO_INTERFACE) usb_audio_configure(); #endif #if defined(EXPERIMENTAL_INTERFACE) endpoint_queue_head[2].unused1 = (uint32_t)experimental_buffer; #endif endpoint0_receive(NULL, 0, 0); return; case 0x0880: // GET_CONFIGURATION reply_buffer[0] = usb_configuration; endpoint0_transmit(reply_buffer, 1, 0); return; case 0x0080: // GET_STATUS (device) reply_buffer[0] = 0; reply_buffer[1] = 0; endpoint0_transmit(reply_buffer, 2, 0); return; case 0x0082: // GET_STATUS (endpoint) endpoint = setup.wIndex & 0x7F; if (endpoint > 7) break; dir = setup.wIndex & 0x80; ctrl = *((uint32_t *)&USB1_ENDPTCTRL0 + endpoint); reply_buffer[0] = 0; reply_buffer[1] = 0; if ((dir && (ctrl & USB_ENDPTCTRL_TXS)) || (!dir && (ctrl & USB_ENDPTCTRL_RXS))) { reply_buffer[0] = 1; } endpoint0_transmit(reply_buffer, 2, 0); return; case 0x0302: // SET_FEATURE (endpoint) endpoint = setup.wIndex & 0x7F; if (endpoint > 7) break; dir = setup.wIndex & 0x80; if (dir) { *((volatile uint32_t *)&USB1_ENDPTCTRL0 + endpoint) |= USB_ENDPTCTRL_TXS; } else { *((volatile uint32_t *)&USB1_ENDPTCTRL0 + endpoint) |= USB_ENDPTCTRL_RXS; } endpoint0_receive(NULL, 0, 0); return; case 0x0102: // CLEAR_FEATURE (endpoint) endpoint = setup.wIndex & 0x7F; if (endpoint > 7) break; dir = setup.wIndex & 0x80; if (dir) { *((volatile uint32_t *)&USB1_ENDPTCTRL0 + endpoint) &= ~USB_ENDPTCTRL_TXS; } else { *((volatile uint32_t *)&USB1_ENDPTCTRL0 + endpoint) &= ~USB_ENDPTCTRL_RXS; } endpoint0_receive(NULL, 0, 0); return; case 0x0680: // GET_DESCRIPTOR case 0x0681: for (list = usb_descriptor_list; list->addr != NULL; list++) { if (setup.wValue == list->wValue && setup.wIndex == list->wIndex) { uint32_t datalen; if ((setup.wValue >> 8) == 3) { // for string descriptors, use the descriptor's // length field, allowing runtime configured length. datalen = *(list->addr); } else { datalen = list->length; } if (datalen > setup.wLength) datalen = setup.wLength; // copy the descriptor, from PROGMEM to DMAMEM if (setup.wValue == 0x200) { // config descriptor needs to adapt to speed const uint8_t *src = usb_config_descriptor_12; if (usb_high_speed) src = usb_config_descriptor_480; memcpy(usb_descriptor_buffer, src, datalen); } else if (setup.wValue == 0x700) { // other speed config also needs to adapt const uint8_t *src = usb_config_descriptor_480; if (usb_high_speed) src = usb_config_descriptor_12; memcpy(usb_descriptor_buffer, src, datalen); usb_descriptor_buffer[1] = 7; } else { memcpy(usb_descriptor_buffer, list->addr, datalen); } // prep transmit arm_dcache_flush_delete(usb_descriptor_buffer, datalen); endpoint0_transmit(usb_descriptor_buffer, datalen, 0); return; } } break; #if defined(CDC_STATUS_INTERFACE) case 0x2221: // CDC_SET_CONTROL_LINE_STATE #ifdef CDC_STATUS_INTERFACE if (setup.wIndex == CDC_STATUS_INTERFACE) { usb_cdc_line_rtsdtr_millis = systick_millis_count; usb_cdc_line_rtsdtr = setup.wValue; } #endif #ifdef CDC2_STATUS_INTERFACE if (setup.wIndex == CDC2_STATUS_INTERFACE) { usb_cdc2_line_rtsdtr_millis = systick_millis_count; usb_cdc2_line_rtsdtr = setup.wValue; } #endif #ifdef CDC3_STATUS_INTERFACE if (setup.wIndex == CDC3_STATUS_INTERFACE) { usb_cdc3_line_rtsdtr_millis = systick_millis_count; usb_cdc3_line_rtsdtr = setup.wValue; } #endif // fall through to next case, to always send ZLP ACK case 0x2321: // CDC_SEND_BREAK endpoint0_receive(NULL, 0, 0); return; case 0x2021: // CDC_SET_LINE_CODING if (setup.wLength != 7) break; endpoint0_setupdata.bothwords = setupdata; endpoint0_receive(endpoint0_buffer, 7, 1); return; #endif #if defined(SEREMU_INTERFACE) || defined(KEYBOARD_INTERFACE) case 0x0921: // HID SET_REPORT if (setup.wLength <= sizeof(endpoint0_buffer)) { //printf("hid set report %x %x\n", setup.word1, setup.word2); endpoint0_setupdata.bothwords = setup.bothwords; endpoint0_buffer[0] = 0xE9; endpoint0_receive(endpoint0_buffer, setup.wLength, 1); return; } break; #endif #if defined(AUDIO_INTERFACE) case 0x0B01: // SET_INTERFACE (alternate setting) if (setup.wIndex == AUDIO_INTERFACE+1) { usb_audio_transmit_setting = setup.wValue; if (usb_audio_transmit_setting > 0) { // TODO: set up AUDIO_TX_ENDPOINT to transmit } endpoint0_receive(NULL, 0, 0); return; } else if (setup.wIndex == AUDIO_INTERFACE+2) { usb_audio_receive_setting = setup.wValue; endpoint0_receive(NULL, 0, 0); return; } break; case 0x0A81: // GET_INTERFACE (alternate setting) if (setup.wIndex == AUDIO_INTERFACE+1) { endpoint0_buffer[0] = usb_audio_transmit_setting; endpoint0_transmit(endpoint0_buffer, 1, 0); return; } else if (setup.wIndex == AUDIO_INTERFACE+2) { endpoint0_buffer[0] = usb_audio_receive_setting; endpoint0_transmit(endpoint0_buffer, 1, 0); return; } break; case 0x0121: // SET FEATURE case 0x0221: case 0x0321: case 0x0421: //printf("set_feature, word1=%x, len=%d\n", setup.word1, setup.wLength); if (setup.wLength <= sizeof(endpoint0_buffer)) { endpoint0_setupdata.bothwords = setupdata; endpoint0_receive(endpoint0_buffer, setup.wLength, 1); return; // handle these after ACK } break; case 0x81A1: // GET FEATURE case 0x82A1: case 0x83A1: case 0x84A1: if (setup.wLength <= sizeof(endpoint0_buffer)) { uint32_t len; if (usb_audio_get_feature(&setup, endpoint0_buffer, &len)) { //printf("GET feature, len=%d\n", len); endpoint0_transmit(endpoint0_buffer, len, 0); return; } } break; case 0x81A2: // GET_CUR (wValue=0, wIndex=interface, wLength=len) if (setup.wLength >= 3) { endpoint0_buffer[0] = 44100 & 255; endpoint0_buffer[1] = 44100 >> 8; endpoint0_buffer[2] = 0; endpoint0_transmit(endpoint0_buffer, 3, 0); return; } break; #endif } USB1_ENDPTCTRL0 = 0x000010001; // stall } static void endpoint0_transmit(const void *data, uint32_t len, int notify) { //printf("tx %lu\n", len); if (len > 0) { // Executing A Transfer Descriptor, page 3182 endpoint0_transfer_data.next = 1; endpoint0_transfer_data.status = (len << 16) | (1<<7); uint32_t addr = (uint32_t)data; endpoint0_transfer_data.pointer0 = addr; // format: table 55-60, pg 3159 endpoint0_transfer_data.pointer1 = addr + 4096; endpoint0_transfer_data.pointer2 = addr + 8192; endpoint0_transfer_data.pointer3 = addr + 12288; endpoint0_transfer_data.pointer4 = addr + 16384; // Case 1: Link list is empty, page 3182 endpoint_queue_head[1].next = (uint32_t)&endpoint0_transfer_data; endpoint_queue_head[1].status = 0; USB1_ENDPTPRIME |= (1<<16); while (USB1_ENDPTPRIME) ; } endpoint0_transfer_ack.next = 1; endpoint0_transfer_ack.status = (1<<7) | (notify ? (1 << 15) : 0); endpoint0_transfer_ack.pointer0 = 0; endpoint_queue_head[0].next = (uint32_t)&endpoint0_transfer_ack; endpoint_queue_head[0].status = 0; USB1_ENDPTCOMPLETE = (1<<0) | (1<<16); USB1_ENDPTPRIME |= (1<<0); endpoint0_notify_mask = (notify ? (1 << 0) : 0); while (USB1_ENDPTPRIME) ; } static void endpoint0_receive(void *data, uint32_t len, int notify) { //printf("rx %lu\n", len); if (len > 0) { // Executing A Transfer Descriptor, page 3182 endpoint0_transfer_data.next = 1; endpoint0_transfer_data.status = (len << 16) | (1<<7); uint32_t addr = (uint32_t)data; endpoint0_transfer_data.pointer0 = addr; // format: table 55-60, pg 3159 endpoint0_transfer_data.pointer1 = addr + 4096; endpoint0_transfer_data.pointer2 = addr + 8192; endpoint0_transfer_data.pointer3 = addr + 12288; endpoint0_transfer_data.pointer4 = addr + 16384; // Case 1: Link list is empty, page 3182 endpoint_queue_head[0].next = (uint32_t)&endpoint0_transfer_data; endpoint_queue_head[0].status = 0; USB1_ENDPTPRIME |= (1<<0); while (USB1_ENDPTPRIME) ; } endpoint0_transfer_ack.next = 1; endpoint0_transfer_ack.status = (1<<7) | (notify ? (1 << 15) : 0); endpoint0_transfer_ack.pointer0 = 0; endpoint_queue_head[1].next = (uint32_t)&endpoint0_transfer_ack; endpoint_queue_head[1].status = 0; USB1_ENDPTCOMPLETE = (1<<0) | (1<<16); USB1_ENDPTPRIME |= (1<<16); endpoint0_notify_mask = (notify ? (1 << 16) : 0); while (USB1_ENDPTPRIME) ; } /*typedef union { struct { union { struct { uint8_t bmRequestType; uint8_t bRequest; }; uint16_t wRequestAndType; }; uint16_t wValue; uint16_t wIndex; uint16_t wLength; }; struct { uint32_t word1; uint32_t word2; }; uint64_t bothwords; } setup_t; */ static void endpoint0_complete(void) { setup_t setup; setup.bothwords = endpoint0_setupdata.bothwords; //printf("complete %x %x %x\n", setup.word1, setup.word2, endpoint0_buffer[0]); #ifdef CDC_STATUS_INTERFACE // 0x2021 is CDC_SET_LINE_CODING if (setup.wRequestAndType == 0x2021 && setup.wIndex == CDC_STATUS_INTERFACE) { memcpy(usb_cdc_line_coding, endpoint0_buffer, 7); printf("usb_cdc_line_coding, baud=%u\n", usb_cdc_line_coding[0]); if (usb_cdc_line_coding[0] == 134) { usb_start_sof_interrupts(NUM_INTERFACE); usb_reboot_timer = 80; // TODO: 10 if only 12 Mbit/sec } } #endif #ifdef CDC2_STATUS_INTERFACE if (setup.wRequestAndType == 0x2021 && setup.wIndex == CDC2_STATUS_INTERFACE) { memcpy(usb_cdc2_line_coding, endpoint0_buffer, 7); printf("usb_cdc2_line_coding, baud=%u\n", usb_cdc2_line_coding[0]); if (usb_cdc2_line_coding[0] == 134) { usb_start_sof_interrupts(NUM_INTERFACE); usb_reboot_timer = 80; // TODO: 10 if only 12 Mbit/sec } } #endif #ifdef CDC3_STATUS_INTERFACE if (setup.wRequestAndType == 0x2021 && setup.wIndex == CDC3_STATUS_INTERFACE) { memcpy(usb_cdc3_line_coding, endpoint0_buffer, 7); printf("usb_cdc3_line_coding, baud=%u\n", usb_cdc3_line_coding[0]); if (usb_cdc3_line_coding[0] == 134) { usb_start_sof_interrupts(NUM_INTERFACE); usb_reboot_timer = 80; // TODO: 10 if only 12 Mbit/sec } } #endif #ifdef KEYBOARD_INTERFACE if (setup.word1 == 0x02000921 && setup.word2 == ((1 << 16) | KEYBOARD_INTERFACE)) { keyboard_leds = endpoint0_buffer[0]; endpoint0_transmit(NULL, 0, 0); } #endif #ifdef SEREMU_INTERFACE if (setup.word1 == 0x03000921 && setup.word2 == ((4<<16)|SEREMU_INTERFACE) && endpoint0_buffer[0] == 0xA9 && endpoint0_buffer[1] == 0x45 && endpoint0_buffer[2] == 0xC2 && endpoint0_buffer[3] == 0x6B) { printf("seremu reboot request\n"); usb_start_sof_interrupts(NUM_INTERFACE); usb_reboot_timer = 80; // TODO: 10 if only 12 Mbit/sec } #endif #ifdef AUDIO_INTERFACE if (setup.word1 == 0x02010121 /* TODO: check setup.word2 */) { usb_audio_set_feature(&endpoint0_setupdata, endpoint0_buffer); } #endif } static void usb_endpoint_config(endpoint_t *qh, uint32_t config, void (*callback)(transfer_t *)) { memset(qh, 0, sizeof(endpoint_t)); qh->config = config; qh->next = 1; // Terminate bit = 1 qh->callback_function = callback; } void usb_config_rx(uint32_t ep, uint32_t packet_size, int do_zlp, void (*cb)(transfer_t *)) { uint32_t config = (packet_size << 16) | (do_zlp ? 0 : (1 << 29)); if (ep < 2 || ep > NUM_ENDPOINTS) return; usb_endpoint_config(endpoint_queue_head + ep * 2, config, cb); if (cb) endpointN_notify_mask |= (1 << ep); } void usb_config_tx(uint32_t ep, uint32_t packet_size, int do_zlp, void (*cb)(transfer_t *)) { uint32_t config = (packet_size << 16) | (do_zlp ? 0 : (1 << 29)); if (ep < 2 || ep > NUM_ENDPOINTS) return; usb_endpoint_config(endpoint_queue_head + ep * 2 + 1, config, cb); if (cb) endpointN_notify_mask |= (1 << (ep + 16)); } void usb_config_rx_iso(uint32_t ep, uint32_t packet_size, int mult, void (*cb)(transfer_t *)) { if (mult < 1 || mult > 3) return; uint32_t config = (packet_size << 16) | (mult << 30); if (ep < 2 || ep > NUM_ENDPOINTS) return; usb_endpoint_config(endpoint_queue_head + ep * 2, config, cb); if (cb) endpointN_notify_mask |= (1 << ep); } void usb_config_tx_iso(uint32_t ep, uint32_t packet_size, int mult, void (*cb)(transfer_t *)) { if (mult < 1 || mult > 3) return; uint32_t config = (packet_size << 16) | (mult << 30); if (ep < 2 || ep > NUM_ENDPOINTS) return; usb_endpoint_config(endpoint_queue_head + ep * 2 + 1, config, cb); if (cb) endpointN_notify_mask |= (1 << (ep + 16)); } void usb_prepare_transfer(transfer_t *transfer, const void *data, uint32_t len, uint32_t param) { transfer->next = 1; transfer->status = (len << 16) | (1<<7); uint32_t addr = (uint32_t)data; transfer->pointer0 = addr; transfer->pointer1 = addr + 4096; transfer->pointer2 = addr + 8192; transfer->pointer3 = addr + 12288; transfer->pointer4 = addr + 16384; transfer->callback_param = param; } #if 0 void usb_print_transfer_log(void) { uint32_t i, count; printf("log %d transfers\n", transfer_log_count); count = transfer_log_count; if (count > LOG_SIZE) count = LOG_SIZE; for (i=0; i < count; i++) { if (transfer_log_head == 0) transfer_log_head = LOG_SIZE; transfer_log_head--; uint32_t log = transfer_log[transfer_log_head]; printf(" %c %X\n", log >> 8, (int)(log & 255)); } } #endif static void schedule_transfer(endpoint_t *endpoint, uint32_t epmask, transfer_t *transfer) { // when we stop at 6, why is the last transfer missing from the USB output? //if (transfer_log_count >= 6) return; //uint32_t ret = (*(const uint8_t *)transfer->pointer0) << 8; if (endpoint->callback_function) { transfer->status |= (1<<15); } __disable_irq(); //digitalWriteFast(1, HIGH); // Executing A Transfer Descriptor, page 2468 (RT1060 manual, Rev 1, 12/2018) transfer_t *last = endpoint->last_transfer; if (last) { last->next = (uint32_t)transfer; if (USB1_ENDPTPRIME & epmask) goto end; //digitalWriteFast(2, HIGH); //ret |= 0x01; uint32_t status, cyccnt=ARM_DWT_CYCCNT; do { USB1_USBCMD |= USB_USBCMD_ATDTW; status = USB1_ENDPTSTATUS; } while (!(USB1_USBCMD & USB_USBCMD_ATDTW) && (ARM_DWT_CYCCNT - cyccnt < 2400)); //USB1_USBCMD &= ~USB_USBCMD_ATDTW; if (status & epmask) goto end; //ret |= 0x02; } //digitalWriteFast(4, HIGH); endpoint->next = (uint32_t)transfer; endpoint->status = 0; USB1_ENDPTPRIME |= epmask; endpoint->first_transfer = transfer; end: endpoint->last_transfer = transfer; __enable_irq(); //digitalWriteFast(4, LOW); //digitalWriteFast(3, LOW); //digitalWriteFast(2, LOW); //digitalWriteFast(1, LOW); //if (transfer_log_head > LOG_SIZE) transfer_log_head = 0; //transfer_log[transfer_log_head++] = ret; //transfer_log_count++; } // ENDPTPRIME - Software should write a one to the corresponding bit when // posting a new transfer descriptor to an endpoint queue head. // Hardware automatically uses this bit to begin parsing for a // new transfer descriptor from the queue head and prepare a // transmit buffer. Hardware clears this bit when the associated // endpoint(s) is (are) successfully primed. // Momentarily set by hardware during hardware re-priming // operations when a dTD is retired, and the dQH is updated. // ENDPTSTATUS - Transmit Buffer Ready - set to one by the hardware as a // response to receiving a command from a corresponding bit // in the ENDPTPRIME register. . Buffer ready is cleared by // USB reset, by the USB DMA system, or through the ENDPTFLUSH // register. (so 0=buffer ready, 1=buffer primed for transmit) // USBCMD.ATDTW - This bit is used as a semaphore to ensure proper addition // of a new dTD to an active (primed) endpoint's linked list. // This bit is set and cleared by software. // This bit would also be cleared by hardware when state machine // is hazard region for which adding a dTD to a primed endpoint // may go unrecognized. /*struct endpoint_struct { uint32_t config; uint32_t current; uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t reserved; uint32_t setup0; uint32_t setup1; transfer_t *first_transfer; transfer_t *last_transfer; void (*callback_function)(transfer_t *completed_transfer); uint32_t unused1; };*/ static void run_callbacks(endpoint_t *ep) { //printf("run_callbacks\n"); transfer_t *first = ep->first_transfer; if (first == NULL) return; // count how many transfers are completed, then remove them from the endpoint's list uint32_t count = 0; transfer_t *t = first; while (1) { if (t->status & (1<<7)) { // found a still-active transfer, new list begins here //printf(" still active\n"); ep->first_transfer = t; break; } count++; t = (transfer_t *)t->next; if ((uint32_t)t == 1) { // reached end of list, all need callbacks, new list is empty //printf(" end of list\n"); ep->first_transfer = NULL; ep->last_transfer = NULL; break; } } // do all the callbacks while (count) { transfer_t *next = (transfer_t *)first->next; ep->callback_function(first); first = next; count--; } } void usb_transmit(int endpoint_number, transfer_t *transfer) { if (endpoint_number < 2 || endpoint_number > NUM_ENDPOINTS) return; endpoint_t *endpoint = endpoint_queue_head + endpoint_number * 2 + 1; uint32_t mask = 1 << (endpoint_number + 16); schedule_transfer(endpoint, mask, transfer); } void usb_receive(int endpoint_number, transfer_t *transfer) { if (endpoint_number < 2 || endpoint_number > NUM_ENDPOINTS) return; endpoint_t *endpoint = endpoint_queue_head + endpoint_number * 2; uint32_t mask = 1 << endpoint_number; schedule_transfer(endpoint, mask, transfer); } uint32_t usb_transfer_status(const transfer_t *transfer) { #if defined(USB_MTPDISK) || defined(USB_MTPDISK_SERIAL) uint32_t status, cmd; //int count=0; cmd = USB1_USBCMD; while (1) { __disable_irq(); USB1_USBCMD = cmd | USB_USBCMD_ATDTW; status = transfer->status; cmd = USB1_USBCMD; __enable_irq(); if (cmd & USB_USBCMD_ATDTW) return status; //if (!(cmd & USB_USBCMD_ATDTW)) continue; //if (status & 0x80) break; // for still active, only 1 reading needed //if (++count > 1) break; // for completed, check 10 times } #else return transfer->status; #endif }